moonjuice/kernel_arpi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge 5.15.89 into android14-5.15

Browse Source 
Changes in 5.15.89
	netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits
	ALSA: control-led: use strscpy in set_led_id()
	ALSA: hda/realtek - Turn on power early
	ALSA: hda/realtek: Enable mute/micmute LEDs on HP Spectre x360 13-aw0xxx
	KVM: arm64: Fix S1PTW handling on RO memslots
	KVM: arm64: nvhe: Fix build with profile optimization
	selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
	efi: tpm: Avoid READ_ONCE() for accessing the event log
	docs: Fix the docs build with Sphinx 6.0
	net: stmmac: add aux timestamps fifo clearance wait
	perf auxtrace: Fix address filter duplicate symbol selection
	s390/kexec: fix ipl report address for kdump
	ASoC: qcom: lpass-cpu: Fix fallback SD line index handling
	s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
	s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
	drm/virtio: Fix GEM handle creation UAF
	drm/i915/gt: Reset twice
	net/mlx5e: Set action fwd flag when parsing tc action goto
	cifs: Fix uninitialized memory read for smb311 posix symlink create
	platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present
	platform/surface: aggregator: Ignore command messages not intended for us
	platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting
	dt-bindings: msm: dsi-controller-main: Fix operating-points-v2 constraint
	drm/msm/adreno: Make adreno quirks not overwrite each other
	dt-bindings: msm: dsi-controller-main: Fix power-domain constraint
	dt-bindings: msm: dsi-controller-main: Fix description of core clock
	dt-bindings: msm: dsi-phy-28nm: Add missing qcom, dsi-phy-regulator-ldo-mode
	platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]
	drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer
	dt-bindings: msm/dsi: Don't require vdds-supply on 10nm PHY
	dt-bindings: msm/dsi: Don't require vcca-supply on 14nm PHY
	platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
	ixgbe: fix pci device refcount leak
	ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
	bus: mhi: host: Fix race between channel preparation and M0 event
	usb: ulpi: defer ulpi_register on ulpi_read_id timeout
	iommu/iova: Fix alloc iova overflows issue
	iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
	sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
	netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.
	powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
	x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
	EDAC/device: Fix period calculation in edac_device_reset_delay_period()
	x86/resctrl: Fix task CLOSID/RMID update race
	regulator: da9211: Use irq handler when ready
	scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile
	scsi: ufs: Stop using the clock scaling lock in the error handler
	scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery
	ASoC: wm8904: fix wrong outputs volume after power reactivation
	ALSA: usb-audio: Make sure to stop endpoints before closing EPs
	ALSA: usb-audio: Relax hw constraints for implicit fb sync
	tipc: fix unexpected link reset due to discovery messages
	octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enable
	hvc/xen: lock console list traversal
	nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()
	af_unix: selftest: Fix the size of the parameter to connect()
	tools/nolibc: x86: Remove `r8`, `r9` and `r10` from the clobber list
	tools/nolibc: x86-64: Use `mov $60,%eax` instead of `mov $60,%rax`
	tools/nolibc: use pselect6 on RISCV
	tools/nolibc/std: move the standard type definitions to std.h
	tools/nolibc/types: split syscall-specific definitions into their own files
	tools/nolibc/arch: split arch-specific code into individual files
	tools/nolibc/arch: mark the _start symbol as weak
	tools/nolibc: Remove .global _start from the entry point code
	tools/nolibc: restore mips branch ordering in the _start block
	tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
	net/sched: act_mpls: Fix warning during failed attribute validation
	net/mlx5: Fix ptp max frequency adjustment range
	net/mlx5e: Don't support encap rules with gbp option
	perf build: Properly guard libbpf includes
	igc: Fix PPS delta between two synchronized end-points
	platform/surface: aggregator: Add missing call to ssam_request_sync_free()
	mm: Always release pages to the buddy allocator in memblock_free_late().
	Documentation: KVM: add API issues section
	KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID
	io_uring: lock overflowing for IOPOLL
	arm64: atomics: format whitespace consistently
	arm64: atomics: remove LL/SC trampolines
	arm64: cmpxchg_double*: hazard against entire exchange variable
	efi: fix NULL-deref in init error path
	scsi: mpt3sas: Remove scsi_dma_map() error messages
	io_uring/io-wq: free worker if task_work creation is canceled
	io_uring/io-wq: only free worker if it was allocated for creation
	block: handle bio_split_to_limits() NULL return
	Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
	pinctrl: amd: Add dynamic debugging for active GPIOs
	Linux 5.15.89

Change-Id: I66c4f269aa7751b2e4aac919f822dfdcb844a69d
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This commit is contained in:
Greg Kroah-Hartman
2023-01-18 13:45:44 +00:00
parent 97463b410b 3bcc86eb3e
commit 0fd420005c
90 changed files with 2261 additions and 1733 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
View File

@@ -31,7 +31,7 @@ properties:
- description: Display byte clock
- description: Display byte interface clock
- description: Display pixel clock
- description: Display escape clock
- description: Display core clock
- description: Display AHB clock
- description: Display AXI clock
@@ -135,8 +135,6 @@ required:
- phy-names
- assigned-clocks
- assigned-clock-parents
- power-domains
- operating-points-v2
- ports
additionalProperties: false

1
Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
View File

@@ -39,7 +39,6 @@ required:
- compatible
- reg
- reg-names
- vdds-supply
unevaluatedProperties: false

1
Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
View File

@@ -37,7 +37,6 @@ required:
- compatible
- reg
- reg-names
- vcca-supply
unevaluatedProperties: false

4
Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
View File

@@ -34,6 +34,10 @@ properties:
vddio-supply:
description: Phandle to vdd-io regulator device node.
qcom,dsi-phy-regulator-ldo-mode:
type: boolean
description: Indicates if the LDO mode PHY regulator is wanted.
required:
- compatible
- reg

6
Documentation/sphinx/load_config.py
View File

@@ -3,7 +3,7 @@
import os
import sys
from sphinx.util.pycompat import execfile_
from sphinx.util.osutil import fs_encoding
# ------------------------------------------------------------------------------
def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
config = namespace.copy()
config['__file__'] = config_file
execfile_(config_file, config)
with open(config_file, 'rb') as f:
code = compile(f.read(), fs_encoding, 'exec')
exec(code, config)
del config['__file__']
namespace.update(config)
else:

60
Documentation/virt/kvm/api.rst
View File

@@ -7360,3 +7360,63 @@ ENOSYS for the others.
When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of
type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request.
9. Known KVM API problems
=========================
In some cases, KVM's API has some inconsistencies or common pitfalls
that userspace need to be aware of. This section details some of
these issues.
Most of them are architecture specific, so the section is split by
architecture.
9.1. x86
--------
``KVM_GET_SUPPORTED_CPUID`` issues
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible
to take its result and pass it directly to ``KVM_SET_CPUID2``. This section
documents some cases in which that requires some care.
Local APIC features
~~~~~~~~~~~~~~~~~~~
CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``,
but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or
``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of
the local APIC.
The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature.
CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``.
It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
has enabled in-kernel emulation of the local APIC.
CPU topology
~~~~~~~~~~~~
Several CPUID values include topology information for the host CPU:
0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems. Different
versions of KVM return different values for this information and userspace
should not rely on it. Currently they return all zeroes.
If userspace wishes to set up a guest topology, it should be careful that
the values of these three leaves differ for each CPU. In particular,
the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
for 0x8000001e; the latter also encodes the core id and node id in bits
7:0 of EBX and ECX respectively.
Obsolete ioctls and capabilities
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually
available. Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if
available.
Ordering of KVM_GET_*/KVM_SET_* ioctls
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
TBD

2
Makefile
View File

@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 15
SUBLEVEL = 88
SUBLEVEL = 89
EXTRAVERSION =
NAME = Trick or Treat

112
arch/arm64/include/asm/atomic_ll_sc.h
View File

@@ -12,19 +12,6 @@
#include <linux/stringify.h>
#ifdef CONFIG_ARM64_LSE_ATOMICS
#define __LL_SC_FALLBACK(asm_ops) \
" b 3f\n" \
" .subsection 1\n" \
"3:\n" \
asm_ops "\n" \
" b 4f\n" \
" .previous\n" \
"4:\n"
#else
#define __LL_SC_FALLBACK(asm_ops) asm_ops
#endif
#ifndef CONFIG_CC_HAS_K_CONSTRAINT
#define K
#endif
@@ -43,12 +30,11 @@ __ll_sc_atomic_##op(int i, atomic_t *v) \
int result; \
\
asm volatile("// atomic_" #op "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %2\n" \
"1: ldxr %w0, %2\n" \
" " #asm_op " %w0, %w0, %w3\n" \
" stxr %w1, %w0, %2\n" \
" cbnz %w1, 1b\n") \
" prfm pstl1strm, %2\n" \
"1: ldxr %w0, %2\n" \
" " #asm_op " %w0, %w0, %w3\n" \
" stxr %w1, %w0, %2\n" \
" cbnz %w1, 1b\n" \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i)); \
}
@@ -61,13 +47,12 @@ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v) \
int result; \
\
asm volatile("// atomic_" #op "_return" #name "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %2\n" \
"1: ld" #acq "xr %w0, %2\n" \
" " #asm_op " %w0, %w0, %w3\n" \
" st" #rel "xr %w1, %w0, %2\n" \
" cbnz %w1, 1b\n" \
" " #mb ) \
" prfm pstl1strm, %2\n" \
"1: ld" #acq "xr %w0, %2\n" \
" " #asm_op " %w0, %w0, %w3\n" \
" st" #rel "xr %w1, %w0, %2\n" \
" cbnz %w1, 1b\n" \
" " #mb \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -83,13 +68,12 @@ __ll_sc_atomic_fetch_##op##name(int i, atomic_t *v) \
int val, result; \
\
asm volatile("// atomic_fetch_" #op #name "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %3\n" \
"1: ld" #acq "xr %w0, %3\n" \
" " #asm_op " %w1, %w0, %w4\n" \
" st" #rel "xr %w2, %w1, %3\n" \
" cbnz %w2, 1b\n" \
" " #mb ) \
" prfm pstl1strm, %3\n" \
"1: ld" #acq "xr %w0, %3\n" \
" " #asm_op " %w1, %w0, %w4\n" \
" st" #rel "xr %w2, %w1, %3\n" \
" cbnz %w2, 1b\n" \
" " #mb \
: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -142,12 +126,11 @@ __ll_sc_atomic64_##op(s64 i, atomic64_t *v) \
unsigned long tmp; \
\
asm volatile("// atomic64_" #op "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %2\n" \
"1: ldxr %0, %2\n" \
" " #asm_op " %0, %0, %3\n" \
" stxr %w1, %0, %2\n" \
" cbnz %w1, 1b") \
" prfm pstl1strm, %2\n" \
"1: ldxr %0, %2\n" \
" " #asm_op " %0, %0, %3\n" \
" stxr %w1, %0, %2\n" \
" cbnz %w1, 1b" \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i)); \
}
@@ -160,13 +143,12 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v) \
unsigned long tmp; \
\
asm volatile("// atomic64_" #op "_return" #name "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %2\n" \
"1: ld" #acq "xr %0, %2\n" \
" " #asm_op " %0, %0, %3\n" \
" st" #rel "xr %w1, %0, %2\n" \
" cbnz %w1, 1b\n" \
" " #mb ) \
" prfm pstl1strm, %2\n" \
"1: ld" #acq "xr %0, %2\n" \
" " #asm_op " %0, %0, %3\n" \
" st" #rel "xr %w1, %0, %2\n" \
" cbnz %w1, 1b\n" \
" " #mb \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -182,13 +164,12 @@ __ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v) \
unsigned long tmp; \
\
asm volatile("// atomic64_fetch_" #op #name "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %3\n" \
"1: ld" #acq "xr %0, %3\n" \
" " #asm_op " %1, %0, %4\n" \
" st" #rel "xr %w2, %1, %3\n" \
" cbnz %w2, 1b\n" \
" " #mb ) \
" prfm pstl1strm, %3\n" \
"1: ld" #acq "xr %0, %3\n" \
" " #asm_op " %1, %0, %4\n" \
" st" #rel "xr %w2, %1, %3\n" \
" cbnz %w2, 1b\n" \
" " #mb \
: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -240,15 +221,14 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v)
unsigned long tmp;
asm volatile("// atomic64_dec_if_positive\n"
__LL_SC_FALLBACK(
" prfm pstl1strm, %2\n"
"1: ldxr %0, %2\n"
" subs %0, %0, #1\n"
" b.lt 2f\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
" dmb ish\n"
"2:")
" prfm pstl1strm, %2\n"
"1: ldxr %0, %2\n"
" subs %0, %0, #1\n"
" b.lt 2f\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
" dmb ish\n"
"2:"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
:
: "cc", "memory");
@@ -274,7 +254,6 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \
old = (u##sz)old; \
\
asm volatile( \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %[v]\n" \
"1: ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n" \
" eor %" #w "[tmp], %" #w "[oldval], %" #w "[old]\n" \
@@ -282,7 +261,7 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \
" st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n" \
" cbnz %w[tmp], 1b\n" \
" " #mb "\n" \
"2:") \
"2:" \
: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval), \
[v] "+Q" (*(u##sz *)ptr) \
: [old] __stringify(constraint) "r" (old), [new] "r" (new) \
@@ -326,7 +305,6 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \
unsigned long tmp, ret; \
\
asm volatile("// __cmpxchg_double" #name "\n" \
__LL_SC_FALLBACK( \
" prfm pstl1strm, %2\n" \
"1: ldxp %0, %1, %2\n" \
" eor %0, %0, %3\n" \
@@ -336,8 +314,8 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \
" st" #rel "xp %w0, %5, %6, %2\n" \
" cbnz %w0, 1b\n" \
" " #mb "\n" \
"2:") \
: "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr) \
"2:" \
: "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr) \
: "r" (old1), "r" (old2), "r" (new1), "r" (new2) \
: cl); \
\

12
arch/arm64/include/asm/atomic_lse.h
View File

@@ -15,7 +15,7 @@ static inline void __lse_atomic_##op(int i, atomic_t *v) \
{ \
asm volatile( \
__LSE_PREAMBLE \
" " #asm_op " %w[i], %[v]\n" \
" " #asm_op " %w[i], %[v]\n" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v)); \
}
@@ -32,7 +32,7 @@ static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v) \
{ \
asm volatile( \
__LSE_PREAMBLE \
" " #asm_op #mb " %w[i], %w[i], %[v]" \
" " #asm_op #mb " %w[i], %w[i], %[v]" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v) \
: cl); \
@@ -168,7 +168,7 @@ static inline void __lse_atomic64_##op(s64 i, atomic64_t *v) \
{ \
asm volatile( \
__LSE_PREAMBLE \
" " #asm_op " %[i], %[v]\n" \
" " #asm_op " %[i], %[v]\n" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v)); \
}
@@ -185,7 +185,7 @@ static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\
{ \
asm volatile( \
__LSE_PREAMBLE \
" " #asm_op #mb " %[i], %[i], %[v]" \
" " #asm_op #mb " %[i], %[i], %[v]" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v) \
: cl); \
@@ -272,7 +272,7 @@ static inline void __lse_atomic64_sub(s64 i, atomic64_t *v)
}
#define ATOMIC64_OP_SUB_RETURN(name, mb, cl...) \
static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v) \
static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)\
{ \
unsigned long tmp; \
\
@@ -403,7 +403,7 @@ __lse__cmpxchg_double##name(unsigned long old1, \
" eor %[old2], %[old2], %[oldval2]\n" \
" orr %[old1], %[old1], %[old2]" \
: [old1] "+&r" (x0), [old2] "+&r" (x1), \
[v] "+Q" (*(unsigned long *)ptr) \
[v] "+Q" (*(__uint128_t *)ptr) \
: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4), \
[oldval1] "r" (oldval1), [oldval2] "r" (oldval2) \
: cl); \

20
arch/arm64/include/asm/kvm_emulate.h
View File

@@ -378,8 +378,26 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
{
if (kvm_vcpu_abt_iss1tw(vcpu))
if (kvm_vcpu_abt_iss1tw(vcpu)) {
/*
* Only a permission fault on a S1PTW should be
* considered as a write. Otherwise, page tables baked
* in a read-only memslot will result in an exception
* being delivered in the guest.
*
* The drawback is that we end-up faulting twice if the
* guest is using any of HW AF/DB: a translation fault
* to map the page containing the PT (read only at
* first), then a permission fault to allow the flags
* to be set.
*/
switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
case ESR_ELx_FSC_PERM:
return true;
default:
return false;
}
}
if (kvm_vcpu_trap_is_iabt(vcpu))
return false;

2
arch/powerpc/include/asm/imc-pmu.h
View File

@@ -137,7 +137,7 @@ struct imc_pmu {
* are inited.
*/
struct imc_pmu_ref {
struct mutex lock;
spinlock_t lock;
unsigned int id;
int refc;
};

136
arch/powerpc/perf/imc-pmu.c
View File

@@ -13,6 +13,7 @@
#include <asm/cputhreads.h>
#include <asm/smp.h>
#include <linux/string.h>
#include <linux/spinlock.h>
/* Nest IMC data structures and variables */
@@ -20,7 +21,7 @@
* Used to avoid races in counting the nest-pmu units during hotplug
* register and unregister
*/
static DEFINE_MUTEX(nest_init_lock);
static DEFINE_SPINLOCK(nest_init_lock);
static DEFINE_PER_CPU(struct imc_pmu_ref *, local_nest_imc_refc);
static struct imc_pmu **per_nest_pmu_arr;
static cpumask_t nest_imc_cpumask;
@@ -49,7 +50,7 @@ static int trace_imc_mem_size;
* core and trace-imc
*/
static struct imc_pmu_ref imc_global_refc = {
.lock = __MUTEX_INITIALIZER(imc_global_refc.lock),
.lock = __SPIN_LOCK_INITIALIZER(imc_global_refc.lock),
.id = 0,
.refc = 0,
};
@@ -393,7 +394,7 @@ static int ppc_nest_imc_cpu_offline(unsigned int cpu)
get_hard_smp_processor_id(cpu));
/*
* If this is the last cpu in this chip then, skip the reference
* count mutex lock and make the reference count on this chip zero.
* count lock and make the reference count on this chip zero.
*/
ref = get_nest_pmu_ref(cpu);
if (!ref)
@@ -455,15 +456,15 @@ static void nest_imc_counters_release(struct perf_event *event)
/*
* See if we need to disable the nest PMU.
* If no events are currently in use, then we have to take a
* mutex to ensure that we don't race with another task doing
* lock to ensure that we don't race with another task doing
* enable or disable the nest counters.
*/
ref = get_nest_pmu_ref(event->cpu);
if (!ref)
return;
/* Take the mutex lock for this node and then decrement the reference count */
mutex_lock(&ref->lock);
/* Take the lock for this node and then decrement the reference count */
spin_lock(&ref->lock);
if (ref->refc == 0) {
/*
* The scenario where this is true is, when perf session is
@@ -475,7 +476,7 @@ static void nest_imc_counters_release(struct perf_event *event)
* an OPAL call to disable the engine in that node.
*
*/
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
return;
}
ref->refc--;
@@ -483,7 +484,7 @@ static void nest_imc_counters_release(struct perf_event *event)
rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_NEST,
get_hard_smp_processor_id(event->cpu));
if (rc) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("nest-imc: Unable to stop the counters for core %d\n", node_id);
return;
}
@@ -491,7 +492,7 @@ static void nest_imc_counters_release(struct perf_event *event)
WARN(1, "nest-imc: Invalid event reference count\n");
ref->refc = 0;
}
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
}
static int nest_imc_event_init(struct perf_event *event)
@@ -550,26 +551,25 @@ static int nest_imc_event_init(struct perf_event *event)
/*
* Get the imc_pmu_ref struct for this node.
* Take the mutex lock and then increment the count of nest pmu events
* inited.
* Take the lock and then increment the count of nest pmu events inited.
*/
ref = get_nest_pmu_ref(event->cpu);
if (!ref)
return -EINVAL;
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
if (ref->refc == 0) {
rc = opal_imc_counters_start(OPAL_IMC_COUNTERS_NEST,
get_hard_smp_processor_id(event->cpu));
if (rc) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("nest-imc: Unable to start the counters for node %d\n",
node_id);
return rc;
}
}
++ref->refc;
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
event->destroy = nest_imc_counters_release;
return 0;
@@ -605,9 +605,8 @@ static int core_imc_mem_init(int cpu, int size)
return -ENOMEM;
mem_info->vbase = page_address(page);
/* Init the mutex */
core_imc_refc[core_id].id = core_id;
mutex_init(&core_imc_refc[core_id].lock);
spin_lock_init(&core_imc_refc[core_id].lock);
rc = opal_imc_counters_init(OPAL_IMC_COUNTERS_CORE,
__pa((void *)mem_info->vbase),
@@ -696,9 +695,8 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
perf_pmu_migrate_context(&core_imc_pmu->pmu, cpu, ncpu);
} else {
/*
* If this is the last cpu in this core then, skip taking refernce
* count mutex lock for this core and directly zero "refc" for
* this core.
* If this is the last cpu in this core then skip taking reference
* count lock for this core and directly zero "refc" for this core.
*/
opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(cpu));
@@ -713,11 +711,11 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
* last cpu in this core and core-imc event running
* in this cpu.
*/
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == IMC_DOMAIN_CORE)
imc_global_refc.refc--;
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
}
return 0;
}
@@ -732,7 +730,7 @@ static int core_imc_pmu_cpumask_init(void)
static void reset_global_refc(struct perf_event *event)
{
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
imc_global_refc.refc--;
/*
@@ -744,7 +742,7 @@ static void reset_global_refc(struct perf_event *event)
imc_global_refc.refc = 0;
imc_global_refc.id = 0;
}
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
}
static void core_imc_counters_release(struct perf_event *event)
@@ -757,17 +755,17 @@ static void core_imc_counters_release(struct perf_event *event)
/*
* See if we need to disable the IMC PMU.
* If no events are currently in use, then we have to take a
* mutex to ensure that we don't race with another task doing
* lock to ensure that we don't race with another task doing
* enable or disable the core counters.
*/
core_id = event->cpu / threads_per_core;
/* Take the mutex lock and decrement the refernce count for this core */
/* Take the lock and decrement the refernce count for this core */
ref = &core_imc_refc[core_id];
if (!ref)
return;
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
if (ref->refc == 0) {
/*
* The scenario where this is true is, when perf session is
@@ -779,7 +777,7 @@ static void core_imc_counters_release(struct perf_event *event)
* an OPAL call to disable the engine in that core.
*
*/
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
return;
}
ref->refc--;
@@ -787,7 +785,7 @@ static void core_imc_counters_release(struct perf_event *event)
rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(event->cpu));
if (rc) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("IMC: Unable to stop the counters for core %d\n", core_id);
return;
}
@@ -795,7 +793,7 @@ static void core_imc_counters_release(struct perf_event *event)
WARN(1, "core-imc: Invalid event reference count\n");
ref->refc = 0;
}
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
reset_global_refc(event);
}
@@ -833,7 +831,6 @@ static int core_imc_event_init(struct perf_event *event)
if ((!pcmi->vbase))
return -ENODEV;
/* Get the core_imc mutex for this core */
ref = &core_imc_refc[core_id];
if (!ref)
return -EINVAL;
@@ -841,22 +838,22 @@ static int core_imc_event_init(struct perf_event *event)
/*
* Core pmu units are enabled only when it is used.
* See if this is triggered for the first time.
* If yes, take the mutex lock and enable the core counters.
* If yes, take the lock and enable the core counters.
* If not, just increment the count in core_imc_refc struct.
*/
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
if (ref->refc == 0) {
rc = opal_imc_counters_start(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(event->cpu));
if (rc) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("core-imc: Unable to start the counters for core %d\n",
core_id);
return rc;
}
}
++ref->refc;
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
/*
* Since the system can run either in accumulation or trace-mode
@@ -867,7 +864,7 @@ static int core_imc_event_init(struct perf_event *event)
* to know whether any other trace/thread imc
* events are running.
*/
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_CORE) {
/*
* No other trace/thread imc events are running in
@@ -876,10 +873,10 @@ static int core_imc_event_init(struct perf_event *event)
imc_global_refc.id = IMC_DOMAIN_CORE;
imc_global_refc.refc++;
} else {
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
return -EBUSY;
}
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
event->hw.event_base = (u64)pcmi->vbase + (config & IMC_EVENT_OFFSET_MASK);
event->destroy = core_imc_counters_release;
@@ -951,10 +948,10 @@ static int ppc_thread_imc_cpu_offline(unsigned int cpu)
mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));
/* Reduce the refc if thread-imc event running on this cpu */
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == IMC_DOMAIN_THREAD)
imc_global_refc.refc--;
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
return 0;
}
@@ -994,7 +991,7 @@ static int thread_imc_event_init(struct perf_event *event)
if (!target)
return -EINVAL;
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
/*
* Check if any other trace/core imc events are running in the
* system, if not set the global id to thread-imc.
@@ -1003,10 +1000,10 @@ static int thread_imc_event_init(struct perf_event *event)
imc_global_refc.id = IMC_DOMAIN_THREAD;
imc_global_refc.refc++;
} else {
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
return -EBUSY;
}
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
event->pmu->task_ctx_nr = perf_sw_context;
event->destroy = reset_global_refc;
@@ -1128,25 +1125,25 @@ static int thread_imc_event_add(struct perf_event *event, int flags)
/*
* imc pmus are enabled only when it is used.
* See if this is triggered for the first time.
* If yes, take the mutex lock and enable the counters.
* If yes, take the lock and enable the counters.
* If not, just increment the count in ref count struct.
*/
ref = &core_imc_refc[core_id];
if (!ref)
return -EINVAL;
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
if (ref->refc == 0) {
if (opal_imc_counters_start(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("thread-imc: Unable to start the counter\
for core %d\n", core_id);
return -EINVAL;
}
}
++ref->refc;
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
return 0;
}
@@ -1163,12 +1160,12 @@ static void thread_imc_event_del(struct perf_event *event, int flags)
return;
}
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
ref->refc--;
if (ref->refc == 0) {
if (opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("thread-imc: Unable to stop the counters\
for core %d\n", core_id);
return;
@@ -1176,7 +1173,7 @@ static void thread_imc_event_del(struct perf_event *event, int flags)
} else if (ref->refc < 0) {
ref->refc = 0;
}
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
/* Set bit 0 of LDBAR to zero, to stop posting updates to memory */
mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));
@@ -1217,9 +1214,8 @@ static int trace_imc_mem_alloc(int cpu_id, int size)
}
}
/* Init the mutex, if not already */
trace_imc_refc[core_id].id = core_id;
mutex_init(&trace_imc_refc[core_id].lock);
spin_lock_init(&trace_imc_refc[core_id].lock);
mtspr(SPRN_LDBAR, 0);
return 0;
@@ -1239,10 +1235,10 @@ static int ppc_trace_imc_cpu_offline(unsigned int cpu)
* Reduce the refc if any trace-imc event running
* on this cpu.
*/
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == IMC_DOMAIN_TRACE)
imc_global_refc.refc--;
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
return 0;
}
@@ -1364,17 +1360,17 @@ static int trace_imc_event_add(struct perf_event *event, int flags)
}
mtspr(SPRN_LDBAR, ldbar_value);
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
if (ref->refc == 0) {
if (opal_imc_counters_start(OPAL_IMC_COUNTERS_TRACE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("trace-imc: Unable to start the counters for core %d\n", core_id);
return -EINVAL;
}
}
++ref->refc;
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
return 0;
}
@@ -1407,19 +1403,19 @@ static void trace_imc_event_del(struct perf_event *event, int flags)
return;
}
mutex_lock(&ref->lock);
spin_lock(&ref->lock);
ref->refc--;
if (ref->refc == 0) {
if (opal_imc_counters_stop(OPAL_IMC_COUNTERS_TRACE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
pr_err("trace-imc: Unable to stop the counters for core %d\n", core_id);
return;
}
} else if (ref->refc < 0) {
ref->refc = 0;
}
mutex_unlock(&ref->lock);
spin_unlock(&ref->lock);
trace_imc_event_stop(event, flags);
}
@@ -1441,7 +1437,7 @@ static int trace_imc_event_init(struct perf_event *event)
* no other thread is running any core/thread imc
* events
*/
mutex_lock(&imc_global_refc.lock);
spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_TRACE) {
/*
* No core/thread imc events are running in the
@@ -1450,10 +1446,10 @@ static int trace_imc_event_init(struct perf_event *event)
imc_global_refc.id = IMC_DOMAIN_TRACE;
imc_global_refc.refc++;
} else {
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
return -EBUSY;
}
mutex_unlock(&imc_global_refc.lock);
spin_unlock(&imc_global_refc.lock);
event->hw.idx = -1;
@@ -1526,10 +1522,10 @@ static int init_nest_pmu_ref(void)
i = 0;
for_each_node(nid) {
/*
* Mutex lock to avoid races while tracking the number of
* Take the lock to avoid races while tracking the number of
* sessions using the chip's nest pmu units.
*/
mutex_init(&nest_imc_refc[i].lock);
spin_lock_init(&nest_imc_refc[i].lock);
/*
* Loop to init the "id" with the node_id. Variable "i" initialized to
@@ -1626,7 +1622,7 @@ static void imc_common_mem_free(struct imc_pmu *pmu_ptr)
static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)
{
if (pmu_ptr->domain == IMC_DOMAIN_NEST) {
mutex_lock(&nest_init_lock);
spin_lock(&nest_init_lock);
if (nest_pmus == 1) {
cpuhp_remove_state(CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE);
kfree(nest_imc_refc);
@@ -1636,7 +1632,7 @@ static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)
if (nest_pmus > 0)
nest_pmus--;
mutex_unlock(&nest_init_lock);
spin_unlock(&nest_init_lock);
}
/* Free core_imc memory */
@@ -1793,11 +1789,11 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
* rest. To handle the cpuhotplug callback unregister, we track
* the number of nest pmus in "nest_pmus".
*/
mutex_lock(&nest_init_lock);
spin_lock(&nest_init_lock);
if (nest_pmus == 0) {
ret = init_nest_pmu_ref();
if (ret) {
mutex_unlock(&nest_init_lock);
spin_unlock(&nest_init_lock);
kfree(per_nest_pmu_arr);
per_nest_pmu_arr = NULL;
goto err_free_mem;
@@ -1805,7 +1801,7 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
/* Register for cpu hotplug notification. */
ret = nest_pmu_cpumask_init();
if (ret) {
mutex_unlock(&nest_init_lock);
spin_unlock(&nest_init_lock);
kfree(nest_imc_refc);
kfree(per_nest_pmu_arr);
per_nest_pmu_arr = NULL;
@@ -1813,7 +1809,7 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
}
}
nest_pmus++;
mutex_unlock(&nest_init_lock);
spin_unlock(&nest_init_lock);
break;
case IMC_DOMAIN_CORE:
ret = core_imc_pmu_cpumask_init();

17
arch/s390/include/asm/cpu_mf.h
View File

@@ -128,8 +128,7 @@ struct hws_combined_entry {
struct hws_diag_entry diag; /* Diagnostic-sampling data entry */
} __packed;
struct hws_trailer_entry {
union {
union hws_trailer_header {
struct {
unsigned int f:1; /* 0 - Block Full Indicator */
unsigned int a:1; /* 1 - Alert request control */
@@ -137,10 +136,13 @@ struct hws_trailer_entry {
unsigned int :29; /* 3 - 31: Reserved */
unsigned int bsdes:16; /* 32-47: size of basic SDE */
unsigned int dsdes:16; /* 48-63: size of diagnostic SDE */
unsigned long long overflow; /* 64 - Overflow Count */
};
unsigned long long flags; /* 0 - 63: All indicators */
};
unsigned long long overflow; /* 64 - sample Overflow count */
__uint128_t val;
};
struct hws_trailer_entry {
union hws_trailer_header header; /* 0 - 15 Flags + Overflow Count */
unsigned char timestamp[16]; /* 16 - 31 timestamp */
unsigned long long reserved1; /* 32 -Reserved */
unsigned long long reserved2; /* */
@@ -287,14 +289,11 @@ static inline unsigned long sample_rate_to_freq(struct hws_qsi_info_block *qsi,
return USEC_PER_SEC * qsi->cpu_speed / rate;
}
#define SDB_TE_ALERT_REQ_MASK 0x4000000000000000UL
#define SDB_TE_BUFFER_FULL_MASK 0x8000000000000000UL
/* Return TOD timestamp contained in an trailer entry */
static inline unsigned long long trailer_timestamp(struct hws_trailer_entry *te)
{
/* TOD in STCKE format */
if (te->t)
if (te->header.t)
return *((unsigned long long *) &te->timestamp[1]);
/* TOD in STCK format */

2
arch/s390/include/asm/percpu.h
View File

@@ -31,7 +31,7 @@
pcp_op_T__ *ptr__; \
preempt_disable_notrace(); \
ptr__ = raw_cpu_ptr(&(pcp)); \
prev__ = *ptr__; \
prev__ = READ_ONCE(*ptr__); \
do { \
old__ = prev__; \
new__ = old__ op (val); \

5
arch/s390/kernel/machine_kexec_file.c
View File

@@ -185,8 +185,6 @@ static int kexec_file_add_ipl_report(struct kimage *image,
data->memsz = ALIGN(data->memsz, PAGE_SIZE);
buf.mem = data->memsz;
if (image->type == KEXEC_TYPE_CRASH)
buf.mem += crashk_res.start;
ptr = (void *)ipl_cert_list_addr;
end = ptr + ipl_cert_list_size;
@@ -223,6 +221,9 @@ static int kexec_file_add_ipl_report(struct kimage *image,
data->kernel_buf + offsetof(struct lowcore, ipl_parmblock_ptr);
*lc_ipl_parmblock_ptr = (__u32)buf.mem;
if (image->type == KEXEC_TYPE_CRASH)
buf.mem += crashk_res.start;
ret = kexec_add_buffer(&buf);
out:
return ret;

101
arch/s390/kernel/perf_cpum_sf.c
View File

@@ -163,14 +163,15 @@ static void free_sampling_buffer(struct sf_buffer *sfb)
static int alloc_sample_data_block(unsigned long *sdbt, gfp_t gfp_flags)
{
unsigned long sdb, *trailer;
struct hws_trailer_entry *te;
unsigned long sdb;
/* Allocate and initialize sample-data-block */
sdb = get_zeroed_page(gfp_flags);
if (!sdb)
return -ENOMEM;
trailer = trailer_entry_ptr(sdb);
*trailer = SDB_TE_ALERT_REQ_MASK;
te = (struct hws_trailer_entry *)trailer_entry_ptr(sdb);
te->header.a = 1;
/* Link SDB into the sample-data-block-table */
*sdbt = sdb;
@@ -1206,7 +1207,7 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
"%s: Found unknown"
" sampling data entry: te->f %i"
" basic.def %#4x (%p)\n", __func__,
te->f, sample->def, sample);
te->header.f, sample->def, sample);
/* Sample slot is not yet written or other record.
*
* This condition can occur if the buffer was reused
@@ -1217,7 +1218,7 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
* that are not full. Stop processing if the first
* invalid format was detected.
*/
if (!te->f)
if (!te->header.f)
break;
}
@@ -1227,6 +1228,16 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
}
}
static inline __uint128_t __cdsg(__uint128_t *ptr, __uint128_t old, __uint128_t new)
{
asm volatile(
" cdsg %[old],%[new],%[ptr]\n"
: [old] "+d" (old), [ptr] "+QS" (*ptr)
: [new] "d" (new)
: "memory", "cc");
return old;
}
/* hw_perf_event_update() - Process sampling buffer
* @event: The perf event
* @flush_all: Flag to also flush partially filled sample-data-blocks
@@ -1243,10 +1254,11 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
*/
static void hw_perf_event_update(struct perf_event *event, int flush_all)
{
unsigned long long event_overflow, sampl_overflow, num_sdb;
union hws_trailer_header old, prev, new;
struct hw_perf_event *hwc = &event->hw;
struct hws_trailer_entry *te;
unsigned long *sdbt;
unsigned long long event_overflow, sampl_overflow, num_sdb, te_flags;
int done;
/*
@@ -1266,25 +1278,25 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all)
te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt);
/* Leave loop if no more work to do (block full indicator) */
if (!te->f) {
if (!te->header.f) {
done = 1;
if (!flush_all)
break;
}
/* Check the sample overflow count */
if (te->overflow)
if (te->header.overflow)
/* Account sample overflows and, if a particular limit
* is reached, extend the sampling buffer.
* For details, see sfb_account_overflows().
*/
sampl_overflow += te->overflow;
sampl_overflow += te->header.overflow;
/* Timestamps are valid for full sample-data-blocks only */
debug_sprintf_event(sfdbg, 6, "%s: sdbt %#lx "
"overflow %llu timestamp %#llx\n",
__func__, (unsigned long)sdbt, te->overflow,
(te->f) ? trailer_timestamp(te) : 0ULL);
__func__, (unsigned long)sdbt, te->header.overflow,
(te->header.f) ? trailer_timestamp(te) : 0ULL);
/* Collect all samples from a single sample-data-block and
* flag if an (perf) event overflow happened. If so, the PMU
@@ -1294,12 +1306,16 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all)
num_sdb++;
/* Reset trailer (using compare-double-and-swap) */
/* READ_ONCE() 16 byte header */
prev.val = __cdsg(&te->header.val, 0, 0);
do {
te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
te_flags |= SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
te->flags, te->overflow,
te_flags, 0ULL));
old.val = prev.val;
new.val = prev.val;
new.f = 0;
new.a = 1;
new.overflow = 0;
prev.val = __cdsg(&te->header.val, old.val, new.val);
} while (prev.val != old.val);
/* Advance to next sample-data-block */
sdbt++;
@@ -1384,7 +1400,7 @@ static void aux_output_end(struct perf_output_handle *handle)
range_scan = AUX_SDB_NUM_ALERT(aux);
for (i = 0, idx = aux->head; i < range_scan; i++, idx++) {
te = aux_sdb_trailer(aux, idx);
if (!(te->flags & SDB_TE_BUFFER_FULL_MASK))
if (!te->header.f)
break;
}
/* i is num of SDBs which are full */
@@ -1392,7 +1408,7 @@ static void aux_output_end(struct perf_output_handle *handle)
/* Remove alert indicators in the buffer */
te = aux_sdb_trailer(aux, aux->alert_mark);
te->flags &= ~SDB_TE_ALERT_REQ_MASK;
te->header.a = 0;
debug_sprintf_event(sfdbg, 6, "%s: SDBs %ld range %ld head %ld\n",
__func__, i, range_scan, aux->head);
@@ -1437,9 +1453,9 @@ static int aux_output_begin(struct perf_output_handle *handle,
idx = aux->empty_mark + 1;
for (i = 0; i < range_scan; i++, idx++) {
te = aux_sdb_trailer(aux, idx);
te->flags &= ~(SDB_TE_BUFFER_FULL_MASK |
SDB_TE_ALERT_REQ_MASK);
te->overflow = 0;
te->header.f = 0;
te->header.a = 0;
te->header.overflow = 0;
}
/* Save the position of empty SDBs */
aux->empty_mark = aux->head + range - 1;
@@ -1448,7 +1464,7 @@ static int aux_output_begin(struct perf_output_handle *handle,
/* Set alert indicator */
aux->alert_mark = aux->head + range/2 - 1;
te = aux_sdb_trailer(aux, aux->alert_mark);
te->flags = te->flags | SDB_TE_ALERT_REQ_MASK;
te->header.a = 1;
/* Reset hardware buffer head */
head = AUX_SDB_INDEX(aux, aux->head);
@@ -1475,14 +1491,17 @@ static int aux_output_begin(struct perf_output_handle *handle,
static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index,
unsigned long long *overflow)
{
unsigned long long orig_overflow, orig_flags, new_flags;
union hws_trailer_header old, prev, new;
struct hws_trailer_entry *te;
te = aux_sdb_trailer(aux, alert_index);
/* READ_ONCE() 16 byte header */
prev.val = __cdsg(&te->header.val, 0, 0);
do {
orig_flags = te->flags;
*overflow = orig_overflow = te->overflow;
if (orig_flags & SDB_TE_BUFFER_FULL_MASK) {
old.val = prev.val;
new.val = prev.val;
*overflow = old.overflow;
if (old.f) {
/*
* SDB is already set by hardware.
* Abort and try to set somewhere
@@ -1490,10 +1509,10 @@ static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index,
*/
return false;
}
new_flags = orig_flags | SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
orig_flags, orig_overflow,
new_flags, 0ULL));
new.a = 1;
new.overflow = 0;
prev.val = __cdsg(&te->header.val, old.val, new.val);
} while (prev.val != old.val);
return true;
}
@@ -1522,8 +1541,9 @@ static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index,
static bool aux_reset_buffer(struct aux_buffer *aux, unsigned long range,
unsigned long long *overflow)
{
unsigned long long orig_overflow, orig_flags, new_flags;
unsigned long i, range_scan, idx, idx_old;
union hws_trailer_header old, prev, new;
unsigned long long orig_overflow;
struct hws_trailer_entry *te;
debug_sprintf_event(sfdbg, 6, "%s: range %ld head %ld alert %ld "
@@ -1554,17 +1574,20 @@ static bool aux_reset_buffer(struct aux_buffer *aux, unsigned long range,
idx_old = idx = aux->empty_mark + 1;
for (i = 0; i < range_scan; i++, idx++) {
te = aux_sdb_trailer(aux, idx);
/* READ_ONCE() 16 byte header */
prev.val = __cdsg(&te->header.val, 0, 0);
do {
orig_flags = te->flags;
orig_overflow = te->overflow;
new_flags = orig_flags & ~SDB_TE_BUFFER_FULL_MASK;
old.val = prev.val;
new.val = prev.val;
orig_overflow = old.overflow;
new.f = 0;
new.overflow = 0;
if (idx == aux->alert_mark)
new_flags |= SDB_TE_ALERT_REQ_MASK;
new.a = 1;
else
new_flags &= ~SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
orig_flags, orig_overflow,
new_flags, 0ULL));
new.a = 0;
prev.val = __cdsg(&te->header.val, old.val, new.val);
} while (prev.val != old.val);
*overflow += orig_overflow;
}

4
arch/x86/boot/bioscall.S
View File

@@ -32,7 +32,7 @@ intcall:
movw %dx, %si
movw %sp, %di
movw $11, %cx
rep; movsd
rep; movsl
/* Pop full state from the stack */
popal
@@ -67,7 +67,7 @@ intcall:
jz 4f
movw %sp, %si
movw $11, %cx
rep; movsd
rep; movsl
4: addw $44, %sp
/* Restore state and return */

12
arch/x86/kernel/cpu/resctrl/rdtgroup.c
View File

@@ -580,8 +580,10 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
/*
* Ensure the task's closid and rmid are written before determining if
* the task is current that will decide if it will be interrupted.
* This pairs with the full barrier between the rq->curr update and
* resctrl_sched_in() during context switch.
*/
barrier();
smp_mb();
/*
* By now, the task's closid and rmid are set. If the task is current
@@ -2363,6 +2365,14 @@ static void rdt_move_group_tasks(struct rdtgroup *from, struct rdtgroup *to,
WRITE_ONCE(t->closid, to->closid);
WRITE_ONCE(t->rmid, to->mon.rmid);
/*
* Order the closid/rmid stores above before the loads
* in task_curr(). This pairs with the full barrier
* between the rq->curr update and resctrl_sched_in()
* during context switch.
*/
smp_mb();
/*
* If the task is on a CPU, set the CPU in the mask.
* The detection is inaccurate as tasks might move or

34
arch/x86/kvm/cpuid.c
View File

@@ -567,15 +567,21 @@ struct kvm_cpuid_array {
int nent;
};
static struct kvm_cpuid_entry2 *do_host_cpuid(struct kvm_cpuid_array *array,
u32 function, u32 index)
static struct kvm_cpuid_entry2 *get_next_cpuid(struct kvm_cpuid_array *array)
{
struct kvm_cpuid_entry2 *entry;
if (array->nent >= array->maxnent)
return NULL;
entry = &array->entries[array->nent++];
return &array->entries[array->nent++];
}
static struct kvm_cpuid_entry2 *do_host_cpuid(struct kvm_cpuid_array *array,
u32 function, u32 index)
{
struct kvm_cpuid_entry2 *entry = get_next_cpuid(array);
if (!entry)
return NULL;
entry->function = function;
entry->index = index;
@@ -755,22 +761,13 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
entry->edx = edx.full;
break;
}
/*
* Per Intel's SDM, the 0x1f is a superset of 0xb,
* thus they can be handled by common code.
*/
case 0x1f:
case 0xb:
/*
* Populate entries until the level type (ECX[15:8]) of the
* previous entry is zero. Note, CPUID EAX.{0x1f,0xb}.0 is
* the starting entry, filled by the primary do_host_cpuid().
* No topology; a valid topology is indicated by the presence
* of subleaf 1.
*/
for (i = 1; entry->ecx & 0xff00; ++i) {
entry = do_host_cpuid(array, function, i);
if (!entry)
goto out;
}
entry->eax = entry->ebx = entry->ecx = 0;
break;
case 0xd:
entry->eax &= supported_xcr0;
@@ -962,6 +959,9 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
entry->ebx = entry->ecx = entry->edx = 0;
break;
case 0x8000001e:
/* Do not return host topology information. */
entry->eax = entry->ebx = entry->ecx = 0;
entry->edx = 0; /* reserved */
break;
case 0x8000001F:
if (!kvm_cpu_cap_has(X86_FEATURE_SEV)) {

4
block/blk-merge.c
View File

@@ -348,11 +348,13 @@ void __blk_queue_split(struct bio **bio, unsigned int *nr_segs)
break;
}
split = blk_bio_segment_split(q, *bio, &q->bio_split, nr_segs);
if (IS_ERR(split))
*bio = split = NULL;
break;
}
if (split) {
/* there isn't chance to merge the splitted bio */
/* there isn't chance to merge the split bio */
split->bi_opf |= REQ_NOMERGE;
bio_chain(split, *bio);

2
block/blk-mq.c
View File

@@ -2196,6 +2196,8 @@ blk_qc_t blk_mq_submit_bio(struct bio *bio)
blk_queue_bounce(q, &bio);
__blk_queue_split(&bio, &nr_segs);
if (!bio)
goto queue_exit;
if (!bio_integrity_prep(bio))
goto queue_exit;

2
drivers/block/drbd/drbd_req.c
View File

@@ -1602,6 +1602,8 @@ blk_qc_t drbd_submit_bio(struct bio *bio)
struct drbd_device *device = bio->bi_bdev->bd_disk->private_data;
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
/*
* what we "blindly" assume:

2
drivers/block/pktcdvd.c
View File

@@ -2407,6 +2407,8 @@ static blk_qc_t pkt_submit_bio(struct bio *bio)
struct bio *split;
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
pd = bio->bi_bdev->bd_disk->queue->queuedata;
if (!pd) {

2
drivers/block/ps3vram.c
View File

@@ -587,6 +587,8 @@ static blk_qc_t ps3vram_submit_bio(struct bio *bio)
dev_dbg(&dev->core, "%s\n", __func__);
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
spin_lock_irq(&priv->lock);
busy = !bio_list_empty(&priv->list);

2
drivers/block/rsxx/dev.c
View File

@@ -127,6 +127,8 @@ static blk_qc_t rsxx_submit_bio(struct bio *bio)
blk_status_t st = BLK_STS_IOERR;
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
might_sleep();

3
drivers/bus/mhi/core/pm.c
View File

@@ -297,7 +297,8 @@ int mhi_pm_m0_transition(struct mhi_controller *mhi_cntrl)
read_lock_irq(&mhi_chan->lock);
/* Only ring DB if ring is not empty */
if (tre_ring->base && tre_ring->wp != tre_ring->rp)
if (tre_ring->base && tre_ring->wp != tre_ring->rp &&
mhi_chan->ch_state == MHI_CH_STATE_ENABLED)
mhi_ring_chan_db(mhi_cntrl, mhi_chan);
read_unlock_irq(&mhi_chan->lock);
}

17
drivers/edac/edac_device.c
View File

@@ -424,17 +424,16 @@ static void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev)
* Then restart the workq on the new delay
*/
void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
unsigned long value)
unsigned long msec)
{
unsigned long jiffs = msecs_to_jiffies(value);
edac_dev->poll_msec = msec;
edac_dev->delay = msecs_to_jiffies(msec);
if (value == 1000)
jiffs = round_jiffies_relative(value);
edac_dev->poll_msec = value;
edac_dev->delay = jiffs;
edac_mod_work(&edac_dev->work, jiffs);
/* See comment in edac_device_workq_setup() above */
if (edac_dev->poll_msec == 1000)
edac_mod_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
else
edac_mod_work(&edac_dev->work, edac_dev->delay);
}
int edac_device_alloc_index(void)

2
drivers/edac/edac_module.h
View File

@@ -56,7 +56,7 @@ bool edac_stop_work(struct delayed_work *work);
bool edac_mod_work(struct delayed_work *work, unsigned long delay);
extern void edac_device_reset_delay_period(struct edac_device_ctl_info
*edac_dev, unsigned long value);
*edac_dev, unsigned long msec);
extern void edac_mc_reset_delay_period(unsigned long value);
extern void *edac_align_ptr(void **p, unsigned size, int n_elems);

7
drivers/firmware/efi/efi.c
View File

@@ -385,8 +385,8 @@ static int __init efisubsys_init(void)
efi_kobj = kobject_create_and_add("efi", firmware_kobj);
if (!efi_kobj) {
pr_err("efi: Firmware registration failed.\n");
destroy_workqueue(efi_rts_wq);
return -ENOMEM;
error = -ENOMEM;
goto err_destroy_wq;
}
if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE |
@@ -429,7 +429,10 @@ err_unregister:
generic_ops_unregister();
err_put:
kobject_put(efi_kobj);
err_destroy_wq:
if (efi_rts_wq)
destroy_workqueue(efi_rts_wq);
return error;
}

30
drivers/gpu/drm/i915/gt/intel_reset.c
View File

@@ -271,6 +271,7 @@ out:
static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
{
struct intel_uncore *uncore = gt->uncore;
int loops = 2;
int err;
/*
@@ -278,18 +279,39 @@ static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
* for fifo space for the write or forcewake the chip for
* the read
*/
do {
intel_uncore_write_fw(uncore, GEN6_GDRST, hw_domain_mask);
/* Wait for the device to ack the reset requests */
err = __intel_wait_for_register_fw(uncore,
GEN6_GDRST, hw_domain_mask, 0,
500, 0,
/*
* Wait for the device to ack the reset requests.
*
* On some platforms, e.g. Jasperlake, we see that the
* engine register state is not cleared until shortly after
* GDRST reports completion, causing a failure as we try
* to immediately resume while the internal state is still
* in flux. If we immediately repeat the reset, the second
* reset appears to serialise with the first, and since
* it is a no-op, the registers should retain their reset
* value. However, there is still a concern that upon
* leaving the second reset, the internal engine state
* is still in flux and not ready for resuming.
*/
err = __intel_wait_for_register_fw(uncore, GEN6_GDRST,
hw_domain_mask, 0,
2000, 0,
NULL);
} while (err == 0 && --loops);
if (err)
GT_TRACE(gt,
"Wait for 0x%08x engines reset failed\n",
hw_domain_mask);
/*
* As we have observed that the engine state is still volatile
* after GDRST is acked, impose a small delay to let everything settle.
*/
udelay(50);
return err;
}

10
drivers/gpu/drm/msm/adreno/adreno_gpu.h
View File

@@ -29,11 +29,9 @@ enum {
ADRENO_FW_MAX,
};
enum adreno_quirks {
ADRENO_QUIRK_TWO_PASS_USE_WFI = 1,
ADRENO_QUIRK_FAULT_DETECT_MASK = 2,
ADRENO_QUIRK_LMLOADKILL_DISABLE = 3,
};
#define ADRENO_QUIRK_TWO_PASS_USE_WFI BIT(0)
#define ADRENO_QUIRK_FAULT_DETECT_MASK BIT(1)
#define ADRENO_QUIRK_LMLOADKILL_DISABLE BIT(2)
struct adreno_rev {
uint8_t core;
@@ -65,7 +63,7 @@ struct adreno_info {
const char *name;
const char *fw[ADRENO_FW_MAX];
uint32_t gmem;
enum adreno_quirks quirks;
u64 quirks;
struct msm_gpu *(*init)(struct drm_device *dev);
const char *zapfw;
u32 inactive_period;

4
drivers/gpu/drm/msm/dp/dp_aux.c
View File

@@ -406,6 +406,10 @@ void dp_aux_isr(struct drm_dp_aux *dp_aux)
isr = dp_catalog_aux_get_irq(aux->catalog);
/* no interrupts pending, return immediately */
if (!isr)
return;
if (!aux->cmd_busy)
return;

19
drivers/gpu/drm/virtio/virtgpu_ioctl.c
View File

@@ -292,10 +292,18 @@ static int virtio_gpu_resource_create_ioctl(struct drm_device *dev, void *data,
drm_gem_object_release(obj);
return ret;
}
drm_gem_object_put(obj);
rc->res_handle = qobj->hw_res_handle; /* similiar to a VM address */
rc->bo_handle = handle;
/*
* The handle owns the reference now. But we must drop our
* remaining reference *after* we no longer need to dereference
* the obj. Otherwise userspace could guess the handle and
* race closing it from another thread.
*/
drm_gem_object_put(obj);
return 0;
}
@@ -656,11 +664,18 @@ static int virtio_gpu_resource_create_blob_ioctl(struct drm_device *dev,
drm_gem_object_release(obj);
return ret;
}
drm_gem_object_put(obj);
rc_blob->res_handle = bo->hw_res_handle;
rc_blob->bo_handle = handle;
/*
* The handle owns the reference now. But we must drop our
* remaining reference *after* we no longer need to dereference
* the obj. Otherwise userspace could guess the handle and
* race closing it from another thread.
*/
drm_gem_object_put(obj);
return 0;
}

4
drivers/iommu/iova.c
View File

@@ -280,7 +280,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
curr = __get_cached_rbnode(iovad, limit_pfn);
curr_iova = to_iova(curr);
retry_pfn = curr_iova->pfn_hi + 1;
retry_pfn = curr_iova->pfn_hi;
retry:
do {
@@ -294,7 +294,7 @@ retry:
if (high_pfn < size || new_pfn < low_pfn) {
if (low_pfn == iovad->start_pfn && retry_pfn < limit_pfn) {
high_pfn = limit_pfn;
low_pfn = retry_pfn;
low_pfn = retry_pfn + 1;
curr = iova_find_limit(iovad, limit_pfn);
curr_iova = to_iova(curr);
goto retry;

4
drivers/iommu/mtk_iommu_v1.c
View File

@@ -655,7 +655,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
ret = iommu_device_sysfs_add(&data->iommu, &pdev->dev, NULL,
dev_name(&pdev->dev));
if (ret)
return ret;
goto out_clk_unprepare;
ret = iommu_device_register(&data->iommu, &mtk_iommu_ops, dev);
if (ret)
@@ -678,6 +678,8 @@ out_dev_unreg:
iommu_device_unregister(&data->iommu);
out_sysfs_remove:
iommu_device_sysfs_remove(&data->iommu);
out_clk_unprepare:
clk_disable_unprepare(data->bclk);
return ret;
}

2
drivers/md/md.c
View File

@@ -458,6 +458,8 @@ static blk_qc_t md_submit_bio(struct bio *bio)
}
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
if (mddev->ro == 1 && unlikely(rw == WRITE)) {
if (bio_sectors(bio) != 0)

2
drivers/net/ethernet/intel/igc/igc_defines.h
View File

@@ -469,7 +469,9 @@
#define IGC_TSAUXC_EN_TT0 BIT(0) /* Enable target time 0. */
#define IGC_TSAUXC_EN_TT1 BIT(1) /* Enable target time 1. */
#define IGC_TSAUXC_EN_CLK0 BIT(2) /* Enable Configurable Frequency Clock 0. */
#define IGC_TSAUXC_ST0 BIT(4) /* Start Clock 0 Toggle on Target Time 0. */
#define IGC_TSAUXC_EN_CLK1 BIT(5) /* Enable Configurable Frequency Clock 1. */
#define IGC_TSAUXC_ST1 BIT(7) /* Start Clock 1 Toggle on Target Time 1. */
#define IGC_TSAUXC_EN_TS0 BIT(8) /* Enable hardware timestamp 0. */
#define IGC_TSAUXC_AUTT0 BIT(9) /* Auxiliary Timestamp Taken. */
#define IGC_TSAUXC_EN_TS1 BIT(10) /* Enable hardware timestamp 0. */

10
drivers/net/ethernet/intel/igc/igc_ptp.c
View File

@@ -323,7 +323,7 @@ static int igc_ptp_feature_enable_i225(struct ptp_clock_info *ptp,
ts = ns_to_timespec64(ns);
if (rq->perout.index == 1) {
if (use_freq) {
tsauxc_mask = IGC_TSAUXC_EN_CLK1;
tsauxc_mask = IGC_TSAUXC_EN_CLK1 | IGC_TSAUXC_ST1;
tsim_mask = 0;
} else {
tsauxc_mask = IGC_TSAUXC_EN_TT1;
@@ -334,7 +334,7 @@ static int igc_ptp_feature_enable_i225(struct ptp_clock_info *ptp,
freqout = IGC_FREQOUT1;
} else {
if (use_freq) {
tsauxc_mask = IGC_TSAUXC_EN_CLK0;
tsauxc_mask = IGC_TSAUXC_EN_CLK0 | IGC_TSAUXC_ST0;
tsim_mask = 0;
} else {
tsauxc_mask = IGC_TSAUXC_EN_TT0;
@@ -348,10 +348,12 @@ static int igc_ptp_feature_enable_i225(struct ptp_clock_info *ptp,
tsauxc = rd32(IGC_TSAUXC);
tsim = rd32(IGC_TSIM);
if (rq->perout.index == 1) {
tsauxc &= ~(IGC_TSAUXC_EN_TT1 | IGC_TSAUXC_EN_CLK1);
tsauxc &= ~(IGC_TSAUXC_EN_TT1 | IGC_TSAUXC_EN_CLK1 |
IGC_TSAUXC_ST1);
tsim &= ~IGC_TSICR_TT1;
} else {
tsauxc &= ~(IGC_TSAUXC_EN_TT0 | IGC_TSAUXC_EN_CLK0);
tsauxc &= ~(IGC_TSAUXC_EN_TT0 | IGC_TSAUXC_EN_CLK0 |
IGC_TSAUXC_ST0);
tsim &= ~IGC_TSICR_TT0;
}
if (on) {

14
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
View File

@@ -855,9 +855,11 @@ static struct pci_dev *ixgbe_get_first_secondary_devfn(unsigned int devfn)
rp_pdev = pci_get_domain_bus_and_slot(0, 0, devfn);
if (rp_pdev && rp_pdev->subordinate) {
bus = rp_pdev->subordinate->number;
pci_dev_put(rp_pdev);
return pci_get_domain_bus_and_slot(0, bus, 0);
}
pci_dev_put(rp_pdev);
return NULL;
}
@@ -874,6 +876,7 @@ static bool ixgbe_x550em_a_has_mii(struct ixgbe_hw *hw)
struct ixgbe_adapter *adapter = hw->back;
struct pci_dev *pdev = adapter->pdev;
struct pci_dev *func0_pdev;
bool has_mii = false;
/* For the C3000 family of SoCs (x550em_a) the internal ixgbe devices
* are always downstream of root ports @ 0000:00:16.0 & 0000:00:17.0
@@ -884,15 +887,16 @@ static bool ixgbe_x550em_a_has_mii(struct ixgbe_hw *hw)
func0_pdev = ixgbe_get_first_secondary_devfn(PCI_DEVFN(0x16, 0));
if (func0_pdev) {
if (func0_pdev == pdev)
return true;
else
return false;
has_mii = true;
goto out;
}
func0_pdev = ixgbe_get_first_secondary_devfn(PCI_DEVFN(0x17, 0));
if (func0_pdev == pdev)
return true;
has_mii = true;
return false;
out:
pci_dev_put(func0_pdev);
return has_mii;
}
/**

4
drivers/net/ethernet/marvell/octeontx2/af/cgx.c
View File

@@ -695,9 +695,9 @@ int cgx_lmac_rx_tx_enable(void *cgxd, int lmac_id, bool enable)
cfg = cgx_read(cgx, lmac_id, CGXX_CMRX_CFG);
if (enable)
cfg |= CMR_EN | DATA_PKT_RX_EN | DATA_PKT_TX_EN;
cfg |= DATA_PKT_RX_EN | DATA_PKT_TX_EN;
else
cfg &= ~(CMR_EN | DATA_PKT_RX_EN | DATA_PKT_TX_EN);
cfg &= ~(DATA_PKT_RX_EN | DATA_PKT_TX_EN);
cgx_write(cgx, lmac_id, CGXX_CMRX_CFG, cfg);
return 0;
}

1
drivers/net/ethernet/marvell/octeontx2/af/cgx.h
View File

@@ -30,7 +30,6 @@
#define CMR_P2X_SEL_SHIFT 59ULL
#define CMR_P2X_SEL_NIX0 1ULL
#define CMR_P2X_SEL_NIX1 2ULL
#define CMR_EN BIT_ULL(55)
#define DATA_PKT_TX_EN BIT_ULL(53)
#define DATA_PKT_RX_EN BIT_ULL(54)
#define CGX_LMAC_TYPE_SHIFT 40

2
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
View File

@@ -88,6 +88,8 @@ static int mlx5e_gen_ip_tunnel_header_vxlan(char buf[],
struct udphdr *udp = (struct udphdr *)(buf);
struct vxlanhdr *vxh;
if (tun_key->tun_flags & TUNNEL_VXLAN_OPT)
return -EOPNOTSUPP;
vxh = (struct vxlanhdr *)((char *)udp + sizeof(struct udphdr));
*ip_proto = IPPROTO_UDP;

23
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
View File

@@ -3597,7 +3597,8 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv,
if (err)
return err;
action |= MLX5_FLOW_CONTEXT_ACTION_COUNT;
action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
MLX5_FLOW_CONTEXT_ACTION_COUNT;
attr->dest_chain = act->chain_index;
break;
case FLOW_ACTION_CT:
@@ -3632,13 +3633,10 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv,
attr->action = action;
if (attr->dest_chain) {
if (attr->action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) {
if (attr->dest_chain && parse_attr->mirred_ifindex[0]) {
NL_SET_ERR_MSG(extack, "Mirroring goto chain rules isn't supported");
return -EOPNOTSUPP;
}
attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
}
if (attr->action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR)
attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
@@ -4146,7 +4144,8 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
if (err)
return err;
action |= MLX5_FLOW_CONTEXT_ACTION_COUNT;
action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
MLX5_FLOW_CONTEXT_ACTION_COUNT;
attr->dest_chain = act->chain_index;
break;
case FLOW_ACTION_CT:
@@ -4218,8 +4217,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
if (!actions_match_supported(priv, flow_action, parse_attr, flow, extack))
return -EOPNOTSUPP;
if (attr->dest_chain) {
if (decap) {
if (attr->dest_chain && decap) {
/* It can be supported if we'll create a mapping for
* the tunnel device only (without tunnel), and set
* this tunnel id with this decap flow.
@@ -4228,16 +4226,11 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
* device.
*/
NL_SET_ERR_MSG(extack,
"Decap with goto isn't supported");
netdev_warn(priv->netdev,
"Decap with goto isn't supported");
NL_SET_ERR_MSG(extack, "Decap with goto isn't supported");
netdev_warn(priv->netdev, "Decap with goto isn't supported");
return -EOPNOTSUPP;
}
attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
}
if (esw_attr->split_count > 0 && !mlx5_esw_has_fwd_fdb(priv->mdev)) {
NL_SET_ERR_MSG_MOD(extack,
"current firmware doesn't support split rule for port mirroring");

2
drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
View File

@@ -599,7 +599,7 @@ static int mlx5_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
static const struct ptp_clock_info mlx5_ptp_clock_info = {
.owner = THIS_MODULE,
.name = "mlx5_ptp",
.max_adj = 100000000,
.max_adj = 50000000,
.n_alarm = 0,
.n_ext_ts = 0,
.n_per_out = 0,

5
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
View File

@@ -229,7 +229,10 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
}
writel(acr_value, ptpaddr + PTP_ACR);
mutex_unlock(&priv->aux_ts_lock);
ret = 0;
/* wait for auxts fifo clear to finish */
ret = readl_poll_timeout(ptpaddr + PTP_ACR, acr_value,
!(acr_value & PTP_ACR_ATSFC),
10, 10000);
break;
default:

44
drivers/nfc/pn533/usb.c
View File

@@ -153,10 +153,17 @@ static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags)
return usb_submit_urb(phy->ack_urb, flags);
}
struct pn533_out_arg {
struct pn533_usb_phy *phy;
struct completion done;
};
static int pn533_usb_send_frame(struct pn533 *dev,
struct sk_buff *out)
{
struct pn533_usb_phy *phy = dev->phy;
struct pn533_out_arg arg;
void *cntx;
int rc;
if (phy->priv == NULL)
@@ -168,10 +175,17 @@ static int pn533_usb_send_frame(struct pn533 *dev,
print_hex_dump_debug("PN533 TX: ", DUMP_PREFIX_NONE, 16, 1,
out->data, out->len, false);
init_completion(&arg.done);
cntx = phy->out_urb->context;
phy->out_urb->context = &arg;
rc = usb_submit_urb(phy->out_urb, GFP_KERNEL);
if (rc)
return rc;
wait_for_completion(&arg.done);
phy->out_urb->context = cntx;
if (dev->protocol_type == PN533_PROTO_REQ_RESP) {
/* request for response for sent packet directly */
rc = pn533_submit_urb_for_response(phy, GFP_KERNEL);
@@ -408,7 +422,31 @@ static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy)
return arg.rc;
}
static void pn533_send_complete(struct urb *urb)
static void pn533_out_complete(struct urb *urb)
{
struct pn533_out_arg *arg = urb->context;
struct pn533_usb_phy *phy = arg->phy;
switch (urb->status) {
case 0:
break; /* success */
case -ECONNRESET:
case -ENOENT:
dev_dbg(&phy->udev->dev,
"The urb has been stopped (status %d)\n",
urb->status);
break;
case -ESHUTDOWN:
default:
nfc_err(&phy->udev->dev,
"Urb failure (status %d)\n",
urb->status);
}
complete(&arg->done);
}
static void pn533_ack_complete(struct urb *urb)
{
struct pn533_usb_phy *phy = urb->context;
@@ -496,10 +534,10 @@ static int pn533_usb_probe(struct usb_interface *interface,
usb_fill_bulk_urb(phy->out_urb, phy->udev,
usb_sndbulkpipe(phy->udev, out_endpoint),
NULL, 0, pn533_send_complete, phy);
NULL, 0, pn533_out_complete, phy);
usb_fill_bulk_urb(phy->ack_urb, phy->udev,
usb_sndbulkpipe(phy->udev, out_endpoint),
NULL, 0, pn533_send_complete, phy);
NULL, 0, pn533_ack_complete, phy);
switch (id->driver_info) {
case PN533_DEVICE_STD:

2
drivers/nvme/host/multipath.c
View File

@@ -329,6 +329,8 @@ static blk_qc_t nvme_ns_head_submit_bio(struct bio *bio)
* pool from the original queue to allocate the bvecs from.
*/
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
srcu_idx = srcu_read_lock(&head->srcu);
ns = nvme_find_path(head);

10
drivers/pinctrl/pinctrl-amd.c
View File

@@ -627,13 +627,15 @@ static bool do_amd_gpio_irq_handler(int irq, void *dev_id)
/* Each status bit covers four pins */
for (i = 0; i < 4; i++) {
regval = readl(regs + i);
/* caused wake on resume context for shared IRQ */
if (irq < 0 && (regval & BIT(WAKE_STS_OFF))) {
if (regval & PIN_IRQ_PENDING)
dev_dbg(&gpio_dev->pdev->dev,
"Waking due to GPIO %d: 0x%x",
"GPIO %d is active: 0x%x",
irqnr + i, regval);
/* caused wake on resume context for shared IRQ */
if (irq < 0 && (regval & BIT(WAKE_STS_OFF)))
return true;
}
if (!(regval & PIN_IRQ_PENDING) ||
!(regval & BIT(INTERRUPT_MASK_OFF)))

4
drivers/platform/surface/aggregator/controller.c
View File

@@ -1700,8 +1700,10 @@ int ssam_request_sync(struct ssam_controller *ctrl,
return status;
status = ssam_request_sync_init(rqst, spec->flags);
if (status)
if (status) {
ssam_request_sync_free(rqst);
return status;
}
ssam_request_sync_set_resp(rqst, rsp);

14
drivers/platform/surface/aggregator/ssh_request_layer.c
View File

@@ -916,6 +916,20 @@ static void ssh_rtl_rx_command(struct ssh_ptl *p, const struct ssam_span *data)
if (sshp_parse_command(dev, data, &command, &command_data))
return;
/*
* Check if the message was intended for us. If not, drop it.
*
* Note: We will need to change this to handle debug messages. On newer
* generation devices, these seem to be sent to tid_out=0x03. We as
* host can still receive them as they can be forwarded via an override
* option on SAM, but doing so does not change tid_out=0x00.
*/
if (command->tid_out != 0x00) {
rtl_warn(rtl, "rtl: dropping message not intended for us (tid = %#04x)\n",
command->tid_out);
return;
}
if (ssh_rqid_is_event(get_unaligned_le16(&command->rqid)))
ssh_rtl_rx_event(rtl, command, &command_data);
else

41
drivers/platform/x86/dell/dell-wmi-privacy.c
View File

@@ -61,7 +61,7 @@ static const struct key_entry dell_wmi_keymap_type_0012[] = {
/* privacy mic mute */
{ KE_KEY, 0x0001, { KEY_MICMUTE } },
/* privacy camera mute */
{ KE_SW, 0x0002, { SW_CAMERA_LENS_COVER } },
{ KE_VSW, 0x0002, { SW_CAMERA_LENS_COVER } },
{ KE_END, 0},
};
@@ -115,11 +115,15 @@ bool dell_privacy_process_event(int type, int code, int status)
switch (code) {
case DELL_PRIVACY_AUDIO_EVENT: /* Mic mute */
case DELL_PRIVACY_CAMERA_EVENT: /* Camera mute */
priv->last_status = status;
sparse_keymap_report_entry(priv->input_dev, key, 1, true);
ret = true;
break;
case DELL_PRIVACY_CAMERA_EVENT: /* Camera mute */
priv->last_status = status;
sparse_keymap_report_entry(priv->input_dev, key, !(status & CAMERA_STATUS), false);
ret = true;
break;
default:
dev_dbg(&priv->wdev->dev, "unknown event type 0x%04x 0x%04x\n", type, code);
}
@@ -295,7 +299,7 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
{
struct privacy_wmi_data *priv;
struct key_entry *keymap;
int ret, i;
int ret, i, j;
ret = wmi_has_guid(DELL_PRIVACY_GUID);
if (!ret)
@@ -307,6 +311,11 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
dev_set_drvdata(&wdev->dev, priv);
priv->wdev = wdev;
ret = get_current_status(priv->wdev);
if (ret)
return ret;
/* create evdev passing interface */
priv->input_dev = devm_input_allocate_device(&wdev->dev);
if (!priv->input_dev)
@@ -321,9 +330,20 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
/* remap the keymap code with Dell privacy key type 0x12 as prefix
* KEY_MICMUTE scancode will be reported as 0x120001
*/
for (i = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0012); i++) {
keymap[i] = dell_wmi_keymap_type_0012[i];
keymap[i].code |= (0x0012 << 16);
for (i = 0, j = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0012); i++) {
/*
* Unlike keys where only presses matter, userspace may act
* on switches in both of their positions. Only register
* SW_CAMERA_LENS_COVER if it is actually there.
*/
if (dell_wmi_keymap_type_0012[i].type == KE_VSW &&
dell_wmi_keymap_type_0012[i].sw.code == SW_CAMERA_LENS_COVER &&
!(priv->features_present & BIT(DELL_PRIVACY_TYPE_CAMERA)))
continue;
keymap[j] = dell_wmi_keymap_type_0012[i];
keymap[j].code |= (0x0012 << 16);
j++;
}
ret = sparse_keymap_setup(priv->input_dev, keymap, NULL);
kfree(keymap);
@@ -334,11 +354,12 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
priv->input_dev->name = "Dell Privacy Driver";
priv->input_dev->id.bustype = BUS_HOST;
ret = input_register_device(priv->input_dev);
if (ret)
return ret;
/* Report initial camera-cover status */
if (priv->features_present & BIT(DELL_PRIVACY_TYPE_CAMERA))
input_report_switch(priv->input_dev, SW_CAMERA_LENS_COVER,
!(priv->last_status & CAMERA_STATUS));
ret = get_current_status(priv->wdev);
ret = input_register_device(priv->input_dev);
if (ret)
return ret;

6
drivers/platform/x86/ideapad-laptop.c
View File

@@ -1493,6 +1493,12 @@ static const struct dmi_system_id set_fn_lock_led_list[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion R7000P2020H"),
}
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion 5 15ARH05"),
}
},
{}
};

7
drivers/platform/x86/sony-laptop.c
View File

@@ -1892,6 +1892,12 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd,
break;
}
/*
* Only probe if there is a separate probe_base, otherwise the probe call
* is equivalent to __sony_nc_kbd_backlight_mode_set(0), resulting in
* the keyboard backlight being turned off.
*/
if (probe_base) {
ret = sony_call_snc_handle(handle, probe_base, &result);
if (ret)
return ret;
@@ -1901,6 +1907,7 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd,
dprintk("no backlight keyboard found\n");
return 0;
}
}
kbdbl_ctl = kzalloc(sizeof(*kbdbl_ctl), GFP_KERNEL);
if (!kbdbl_ctl)

11
drivers/regulator/da9211-regulator.c
View File

@@ -498,6 +498,12 @@ static int da9211_i2c_probe(struct i2c_client *i2c)
chip->chip_irq = i2c->irq;
ret = da9211_regulator_init(chip);
if (ret < 0) {
dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
return ret;
}
if (chip->chip_irq != 0) {
ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL,
da9211_irq_handler,
@@ -512,11 +518,6 @@ static int da9211_i2c_probe(struct i2c_client *i2c)
dev_warn(chip->dev, "No IRQ configured\n");
}
ret = da9211_regulator_init(chip);
if (ret < 0)
dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
return ret;
}

2
drivers/s390/block/dcssblk.c
View File

@@ -866,6 +866,8 @@ dcssblk_submit_bio(struct bio *bio)
unsigned long bytes_done;
blk_queue_split(&bio);
if (!bio)
return BLK_QC_T_NONE;
bytes_done = 0;
dev_info = bio->bi_bdev->bd_disk->private_data;

2
drivers/scsi/mpi3mr/Makefile
View File

@@ -1,4 +1,4 @@
# mpi3mr makefile
obj-m += mpi3mr.o
obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr.o
mpi3mr-y += mpi3mr_os.o \
mpi3mr_fw.o \

18
drivers/scsi/mpt3sas/mpt3sas_base.c
View File

@@ -2594,12 +2594,8 @@ _base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc,
/* Get the SG list pointer and info. */
sges_left = scsi_dma_map(scmd);
if (sges_left < 0) {
sdev_printk(KERN_ERR, scmd->device,
"scsi_dma_map failed: request for %d bytes!\n",
scsi_bufflen(scmd));
if (sges_left < 0)
return 1;
}
/* Check if we need to build a native SG list. */
if (!base_is_prp_possible(ioc, pcie_device,
@@ -2706,12 +2702,8 @@ _base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
sg_scmd = scsi_sglist(scmd);
sges_left = scsi_dma_map(scmd);
if (sges_left < 0) {
sdev_printk(KERN_ERR, scmd->device,
"scsi_dma_map failed: request for %d bytes!\n",
scsi_bufflen(scmd));
if (sges_left < 0)
return -ENOMEM;
}
sg_local = &mpi_request->SGL;
sges_in_segment = ioc->max_sges_in_main_message;
@@ -2854,12 +2846,8 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
sg_scmd = scsi_sglist(scmd);
sges_left = scsi_dma_map(scmd);
if (sges_left < 0) {
sdev_printk(KERN_ERR, scmd->device,
"scsi_dma_map failed: request for %d bytes!\n",
scsi_bufflen(scmd));
if (sges_left < 0)
return -ENOMEM;
}
sg_local = &mpi_request->SGL;
sges_in_segment = (ioc->request_sz -

44
drivers/tty/hvc/hvc_xen.c
View File

@@ -52,17 +52,22 @@ static DEFINE_SPINLOCK(xencons_lock);
static struct xencons_info *vtermno_to_xencons(int vtermno)
{
struct xencons_info *entry, *n, *ret = NULL;
struct xencons_info *entry, *ret = NULL;
unsigned long flags;
if (list_empty(&xenconsoles))
spin_lock_irqsave(&xencons_lock, flags);
if (list_empty(&xenconsoles)) {
spin_unlock_irqrestore(&xencons_lock, flags);
return NULL;
}
list_for_each_entry_safe(entry, n, &xenconsoles, list) {
list_for_each_entry(entry, &xenconsoles, list) {
if (entry->vtermno == vtermno) {
ret = entry;
break;
}
}
spin_unlock_irqrestore(&xencons_lock, flags);
return ret;
}
@@ -223,7 +228,7 @@ static int xen_hvm_console_init(void)
{
int r;
uint64_t v = 0;
unsigned long gfn;
unsigned long gfn, flags;
struct xencons_info *info;
if (!xen_hvm_domain())
@@ -258,9 +263,9 @@ static int xen_hvm_console_init(void)
goto err;
info->vtermno = HVC_COOKIE;
spin_lock(&xencons_lock);
spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
spin_unlock(&xencons_lock);
spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
err:
@@ -283,6 +288,7 @@ static int xencons_info_pv_init(struct xencons_info *info, int vtermno)
static int xen_pv_console_init(void)
{
struct xencons_info *info;
unsigned long flags;
if (!xen_pv_domain())
return -ENODEV;
@@ -299,9 +305,9 @@ static int xen_pv_console_init(void)
/* already configured */
return 0;
}
spin_lock(&xencons_lock);
spin_lock_irqsave(&xencons_lock, flags);
xencons_info_pv_init(info, HVC_COOKIE);
spin_unlock(&xencons_lock);
spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
}
@@ -309,6 +315,7 @@ static int xen_pv_console_init(void)
static int xen_initial_domain_console_init(void)
{
struct xencons_info *info;
unsigned long flags;
if (!xen_initial_domain())
return -ENODEV;
@@ -323,9 +330,9 @@ static int xen_initial_domain_console_init(void)
info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false);
info->vtermno = HVC_COOKIE;
spin_lock(&xencons_lock);
spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
spin_unlock(&xencons_lock);
spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
}
@@ -380,10 +387,12 @@ static void xencons_free(struct xencons_info *info)
static int xen_console_remove(struct xencons_info *info)
{
unsigned long flags;
xencons_disconnect_backend(info);
spin_lock(&xencons_lock);
spin_lock_irqsave(&xencons_lock, flags);
list_del(&info->list);
spin_unlock(&xencons_lock);
spin_unlock_irqrestore(&xencons_lock, flags);
if (info->xbdev != NULL)
xencons_free(info);
else {
@@ -464,6 +473,7 @@ static int xencons_probe(struct xenbus_device *dev,
{
int ret, devid;
struct xencons_info *info;
unsigned long flags;
devid = dev->nodename[strlen(dev->nodename) - 1] - '0';
if (devid == 0)
@@ -482,9 +492,9 @@ static int xencons_probe(struct xenbus_device *dev,
ret = xencons_connect_backend(dev, info);
if (ret < 0)
goto error;
spin_lock(&xencons_lock);
spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
spin_unlock(&xencons_lock);
spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
@@ -583,10 +593,12 @@ static int __init xen_hvc_init(void)
info->hvc = hvc_alloc(HVC_COOKIE, info->irq, ops, 256);
if (IS_ERR(info->hvc)) {
unsigned long flags;
r = PTR_ERR(info->hvc);
spin_lock(&xencons_lock);
spin_lock_irqsave(&xencons_lock, flags);
list_del(&info->list);
spin_unlock(&xencons_lock);
spin_unlock_irqrestore(&xencons_lock, flags);
if (info->irq)
unbind_from_irqhandler(info->irq, NULL);
kfree(info);

32
drivers/ufs/core/ufshcd.c
View File

@@ -2846,6 +2846,12 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
*/
rcu_read_lock();
/*
* Allows the UFS error handler to wait for prior ufshcd_queuecommand()
* calls.
*/
rcu_read_lock();
switch (hba->ufshcd_state) {
case UFSHCD_STATE_OPERATIONAL:
break;
@@ -6120,6 +6126,14 @@ void ufshcd_schedule_eh_work(struct ufs_hba *hba)
}
}
static void ufshcd_force_error_recovery(struct ufs_hba *hba)
{
spin_lock_irq(hba->host->host_lock);
hba->force_reset = true;
ufshcd_schedule_eh_work(hba);
spin_unlock_irq(hba->host->host_lock);
}
static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow)
{
down_write(&hba->clk_scaling_lock);
@@ -9233,6 +9247,15 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (!hba->dev_info.b_rpm_dev_flush_capable) {
ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
if (ret && pm_op != UFS_SHUTDOWN_PM) {
/*
* If return err in suspend flow, IO will hang.
* Trigger error handler and break suspend for
* error recovery.
*/
ufshcd_force_error_recovery(hba);
ret = -EBUSY;
}
if (ret)
goto enable_scaling;
}
@@ -9244,6 +9267,15 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
*/
check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops);
if (ret && pm_op != UFS_SHUTDOWN_PM) {
/*
* If return err in suspend flow, IO will hang.
* Trigger error handler and break suspend for
* error recovery.
*/
ufshcd_force_error_recovery(hba);
ret = -EBUSY;
}
if (ret)
goto set_dev_active;

1
fs/cifs/link.c
View File

@@ -459,6 +459,7 @@ smb3_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
oparms.disposition = FILE_CREATE;
oparms.fid = &fid;
oparms.reconnect = false;
oparms.mode = 0644;
rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL,
NULL, NULL);

4
include/linux/tpm_eventlog.h
View File

@@ -198,8 +198,8 @@ static __always_inline int __calc_tpm2_event_size(struct tcg_pcr_event2_head *ev
* The loop below will unmap these fields if the log is larger than
* one page, so save them here for reference:
*/
count = READ_ONCE(event->count);
event_type = READ_ONCE(event->event_type);
count = event->count;
event_type = event->event_type;
/* Verify that it's the log header */
if (event_header->pcr_idx != 0 ||

6
io_uring/io-wq.c
View File

@@ -1217,6 +1217,12 @@ static void io_wq_cancel_tw_create(struct io_wq *wq)
worker = container_of(cb, struct io_worker, create_work);
io_worker_cancel_cb(worker);
/*
* Only the worker continuation helper has worker allocated and
* hence needs freeing.
*/
if (cb->func == create_worker_cont)
kfree(worker);
}
}

18
io_uring/io_uring.c
View File

@@ -2477,12 +2477,26 @@ static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,
io_init_req_batch(&rb);
while (!list_empty(done)) {
struct io_uring_cqe *cqe;
unsigned cflags;
req = list_first_entry(done, struct io_kiocb, inflight_entry);
list_del(&req->inflight_entry);
io_fill_cqe_req(req, req->result, io_put_rw_kbuf(req));
cflags = io_put_rw_kbuf(req);
(*nr_events)++;
cqe = io_get_cqe(ctx);
if (cqe) {
WRITE_ONCE(cqe->user_data, req->user_data);
WRITE_ONCE(cqe->res, req->result);
WRITE_ONCE(cqe->flags, cflags);
} else {
spin_lock(&ctx->completion_lock);
io_cqring_event_overflow(ctx, req->user_data,
req->result, cflags);
spin_unlock(&ctx->completion_lock);
}
if (req_ref_put_and_test(req))
io_req_free_batch(&rb, req, &ctx->submit_state);
}

35
kernel/sched/core.c
View File

@@ -2569,14 +2569,43 @@ void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
int dup_user_cpus_ptr(struct task_struct *dst, struct task_struct *src,
int node)
{
if (!src->user_cpus_ptr)
cpumask_t *user_mask;
unsigned long flags;
/*
* Always clear dst->user_cpus_ptr first as their user_cpus_ptr's
* may differ by now due to racing.
*/
dst->user_cpus_ptr = NULL;
/*
* This check is racy and losing the race is a valid situation.
* It is not worth the extra overhead of taking the pi_lock on
* every fork/clone.
*/
if (data_race(!src->user_cpus_ptr))
return 0;
dst->user_cpus_ptr = kmalloc_node(cpumask_size(), GFP_KERNEL, node);
if (!dst->user_cpus_ptr)
user_mask = kmalloc_node(cpumask_size(), GFP_KERNEL, node);
if (!user_mask)
return -ENOMEM;
/*
* Use pi_lock to protect content of user_cpus_ptr
*
* Though unlikely, user_cpus_ptr can be reset to NULL by a concurrent
* do_set_cpus_allowed().
*/
raw_spin_lock_irqsave(&src->pi_lock, flags);
if (src->user_cpus_ptr) {
swap(dst->user_cpus_ptr, user_mask);
cpumask_copy(dst->user_cpus_ptr, src->user_cpus_ptr);
}
raw_spin_unlock_irqrestore(&src->pi_lock, flags);
if (unlikely(user_mask))
kfree(user_mask);
return 0;
}

8
mm/memblock.c
View File

@@ -1621,7 +1621,13 @@ void __init __memblock_free_late(phys_addr_t base, phys_addr_t size)
end = PFN_DOWN(base + size);
for (; cursor < end; cursor++) {
memblock_free_pages(pfn_to_page(cursor), cursor, 0);
/*
* Reserved pages are always initialized by the end of
* memblock_free_all() (by memmap_init() and, if deferred
* initialization is enabled, memmap_init_reserved_pages()), so
* these pages can be released directly to the buddy allocator.
*/
__free_pages_core(pfn_to_page(cursor), 0);
totalram_pages_inc();
}
}

4
net/ipv6/raw.c
View File

@@ -539,6 +539,7 @@ csum_copy_err:
static int rawv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
struct raw6_sock *rp)
{
struct ipv6_txoptions *opt;
struct sk_buff *skb;
int err = 0;
int offset;
@@ -556,6 +557,9 @@ static int rawv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
offset = rp->offset;
total_len = inet_sk(sk)->cork.base.length;
opt = inet6_sk(sk)->cork.opt;
total_len -= opt ? opt->opt_flen : 0;
if (offset >= total_len - 1) {
err = -EINVAL;
ip6_flush_pending_frames(sk);

4
net/netfilter/ipset/ip_set_bitmap_ip.c
View File

@@ -308,8 +308,8 @@ bitmap_ip_create(struct net *net, struct ip_set *set, struct nlattr *tb[],
return -IPSET_ERR_BITMAP_RANGE;
pr_debug("mask_bits %u, netmask %u\n", mask_bits, netmask);
hosts = 2 << (32 - netmask - 1);
elements = 2 << (netmask - mask_bits - 1);
hosts = 2U << (32 - netmask - 1);
elements = 2UL << (netmask - mask_bits - 1);
}
if (elements > IPSET_BITMAP_MAX_RANGE + 1)
return -IPSET_ERR_BITMAP_RANGE_SIZE;

2
net/netfilter/nft_payload.c
View File

@@ -63,7 +63,7 @@ nft_payload_copy_vlan(u32 *d, const struct sk_buff *skb, u8 offset, u8 len)
return false;
if (offset + len > VLAN_ETH_HLEN + vlan_hlen)
ethlen -= offset + len - VLAN_ETH_HLEN + vlan_hlen;
ethlen -= offset + len - VLAN_ETH_HLEN - vlan_hlen;
memcpy(dst_u8, vlanh + offset - vlan_hlen, ethlen);

8
net/sched/act_mpls.c
View File

@@ -133,6 +133,11 @@ static int valid_label(const struct nlattr *attr,
{
const u32 *label = nla_data(attr);
if (nla_len(attr) != sizeof(*label)) {
NL_SET_ERR_MSG_MOD(extack, "Invalid MPLS label length");
return -EINVAL;
}
if (*label & ~MPLS_LABEL_MASK || *label == MPLS_LABEL_IMPLNULL) {
NL_SET_ERR_MSG_MOD(extack, "MPLS label out of range");
return -EINVAL;
@@ -144,7 +149,8 @@ static int valid_label(const struct nlattr *attr,
static const struct nla_policy mpls_policy[TCA_MPLS_MAX + 1] = {
[TCA_MPLS_PARMS] = NLA_POLICY_EXACT_LEN(sizeof(struct tc_mpls)),
[TCA_MPLS_PROTO] = { .type = NLA_U16 },
[TCA_MPLS_LABEL] = NLA_POLICY_VALIDATE_FN(NLA_U32, valid_label),
[TCA_MPLS_LABEL] = NLA_POLICY_VALIDATE_FN(NLA_BINARY,
valid_label),
[TCA_MPLS_TC] = NLA_POLICY_RANGE(NLA_U8, 0, 7),
[TCA_MPLS_TTL] = NLA_POLICY_MIN(NLA_U8, 1),
[TCA_MPLS_BOS] = NLA_POLICY_RANGE(NLA_U8, 0, 1),

12
net/tipc/node.c
View File

@@ -1179,8 +1179,9 @@ void tipc_node_check_dest(struct net *net, u32 addr,
bool addr_match = false;
bool sign_match = false;
bool link_up = false;
bool link_is_reset = false;
bool accept_addr = false;
bool reset = true;
bool reset = false;
char *if_name;
unsigned long intv;
u16 session;
@@ -1200,14 +1201,14 @@ void tipc_node_check_dest(struct net *net, u32 addr,
/* Prepare to validate requesting node's signature and media address */
l = le->link;
link_up = l && tipc_link_is_up(l);
link_is_reset = l && tipc_link_is_reset(l);
addr_match = l && !memcmp(&le->maddr, maddr, sizeof(*maddr));
sign_match = (signature == n->signature);
/* These three flags give us eight permutations: */
if (sign_match && addr_match && link_up) {
/* All is fine. Do nothing. */
reset = false;
/* All is fine. Ignore requests. */
/* Peer node is not a container/local namespace */
if (!n->peer_hash_mix)
n->peer_hash_mix = hash_mixes;
@@ -1232,6 +1233,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
*/
accept_addr = true;
*respond = true;
reset = true;
} else if (!sign_match && addr_match && link_up) {
/* Peer node rebooted. Two possibilities:
* - Delayed re-discovery; this link endpoint has already
@@ -1263,6 +1265,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
n->signature = signature;
accept_addr = true;
*respond = true;
reset = true;
}
if (!accept_addr)
@@ -1291,6 +1294,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
tipc_link_fsm_evt(l, LINK_RESET_EVT);
if (n->state == NODE_FAILINGOVER)
tipc_link_fsm_evt(l, LINK_FAILOVER_BEGIN_EVT);
link_is_reset = tipc_link_is_reset(l);
le->link = l;
n->link_cnt++;
tipc_node_calculate_timer(n, l);
@@ -1303,7 +1307,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
memcpy(&le->maddr, maddr, sizeof(*maddr));
exit:
tipc_node_write_unlock(n);
if (reset && l && !tipc_link_is_reset(l))
if (reset && !link_is_reset)
tipc_node_link_down(n, b->identity, false);
tipc_node_put(n);
}

5
sound/core/control_led.c
View File

@@ -530,12 +530,11 @@ static ssize_t set_led_id(struct snd_ctl_led_card *led_card, const char *buf, si
bool attach)
{
char buf2[256], *s, *os;
size_t len = max(sizeof(s) - 1, count);
struct snd_ctl_elem_id id;
int err;
strncpy(buf2, buf, len);
buf2[len] = '\0';
if (strscpy(buf2, buf, sizeof(buf2)) < 0)
return -E2BIG;
memset(&id, 0, sizeof(id));
id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
s = buf2;

53
sound/pci/hda/patch_realtek.c
View File

@@ -3558,6 +3558,15 @@ static void alc256_init(struct hda_codec *codec)
hda_nid_t hp_pin = alc_get_hp_pin(spec);
bool hp_pin_sense;
if (spec->ultra_low_power) {
alc_update_coef_idx(codec, 0x03, 1<<1, 1<<1);
alc_update_coef_idx(codec, 0x08, 3<<2, 3<<2);
alc_update_coef_idx(codec, 0x08, 7<<4, 0);
alc_update_coef_idx(codec, 0x3b, 1<<15, 0);
alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
msleep(30);
}
if (!hp_pin)
hp_pin = 0x21;
@@ -3569,14 +3578,6 @@ static void alc256_init(struct hda_codec *codec)
msleep(2);
alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
if (spec->ultra_low_power) {
alc_update_coef_idx(codec, 0x03, 1<<1, 1<<1);
alc_update_coef_idx(codec, 0x08, 3<<2, 3<<2);
alc_update_coef_idx(codec, 0x08, 7<<4, 0);
alc_update_coef_idx(codec, 0x3b, 1<<15, 0);
alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
msleep(30);
}
snd_hda_codec_write(codec, hp_pin, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
@@ -3707,6 +3708,13 @@ static void alc225_init(struct hda_codec *codec)
hda_nid_t hp_pin = alc_get_hp_pin(spec);
bool hp1_pin_sense, hp2_pin_sense;
if (spec->ultra_low_power) {
alc_update_coef_idx(codec, 0x08, 0x0f << 2, 3<<2);
alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
alc_update_coef_idx(codec, 0x33, 1<<11, 0);
msleep(30);
}
if (spec->codec_variant != ALC269_TYPE_ALC287 &&
spec->codec_variant != ALC269_TYPE_ALC245)
/* required only at boot or S3 and S4 resume time */
@@ -3728,12 +3736,6 @@ static void alc225_init(struct hda_codec *codec)
msleep(2);
alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
if (spec->ultra_low_power) {
alc_update_coef_idx(codec, 0x08, 0x0f << 2, 3<<2);
alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
alc_update_coef_idx(codec, 0x33, 1<<11, 0);
msleep(30);
}
if (hp1_pin_sense || spec->ultra_low_power)
snd_hda_codec_write(codec, hp_pin, 0,
@@ -4637,6 +4639,16 @@ static void alc285_fixup_hp_coef_micmute_led(struct hda_codec *codec,
}
}
static void alc285_fixup_hp_gpio_micmute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
struct alc_spec *spec = codec->spec;
if (action == HDA_FIXUP_ACT_PRE_PROBE)
spec->micmute_led_polarity = 1;
alc_fixup_hp_gpio_led(codec, action, 0, 0x04);
}
static void alc236_fixup_hp_coef_micmute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -4658,6 +4670,13 @@ static void alc285_fixup_hp_mute_led(struct hda_codec *codec,
alc285_fixup_hp_coef_micmute_led(codec, fix, action);
}
static void alc285_fixup_hp_spectre_x360_mute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
alc285_fixup_hp_mute_led_coefbit(codec, fix, action);
alc285_fixup_hp_gpio_micmute_led(codec, fix, action);
}
static void alc236_fixup_hp_mute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -6911,6 +6930,7 @@ enum {
ALC285_FIXUP_ASUS_G533Z_PINS,
ALC285_FIXUP_HP_GPIO_LED,
ALC285_FIXUP_HP_MUTE_LED,
ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED,
ALC236_FIXUP_HP_GPIO_LED,
ALC236_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF,
@@ -8280,6 +8300,10 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_hp_mute_led,
},
[ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_hp_spectre_x360_mute_led,
},
[ALC236_FIXUP_HP_GPIO_LED] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc236_fixup_hp_gpio_led,
@@ -8998,6 +9022,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x86f9, "HP Spectre x360 13-aw0xxx", ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8720, "HP EliteBook x360 1040 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),

7
sound/soc/codecs/wm8904.c
View File

@@ -697,6 +697,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
int dcs_mask;
int dcs_l, dcs_r;
int dcs_l_reg, dcs_r_reg;
int an_out_reg;
int timeout;
int pwr_reg;
@@ -712,6 +713,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
dcs_mask = WM8904_DCS_ENA_CHAN_0 | WM8904_DCS_ENA_CHAN_1;
dcs_r_reg = WM8904_DC_SERVO_8;
dcs_l_reg = WM8904_DC_SERVO_9;
an_out_reg = WM8904_ANALOGUE_OUT1_LEFT;
dcs_l = 0;
dcs_r = 1;
break;
@@ -720,6 +722,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
dcs_mask = WM8904_DCS_ENA_CHAN_2 | WM8904_DCS_ENA_CHAN_3;
dcs_r_reg = WM8904_DC_SERVO_6;
dcs_l_reg = WM8904_DC_SERVO_7;
an_out_reg = WM8904_ANALOGUE_OUT2_LEFT;
dcs_l = 2;
dcs_r = 3;
break;
@@ -792,6 +795,10 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
snd_soc_component_update_bits(component, reg,
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP);
/* Update volume, requires PGA to be powered */
val = snd_soc_component_read(component, an_out_reg);
snd_soc_component_write(component, an_out_reg, val);
break;
case SND_SOC_DAPM_POST_PMU:

5
sound/soc/qcom/lpass-cpu.c
View File

@@ -851,10 +851,11 @@ static void of_lpass_cpu_parse_dai_data(struct device *dev,
struct lpass_data *data)
{
struct device_node *node;
int ret, id;
int ret, i, id;
/* Allow all channels by default for backwards compatibility */
for (id = 0; id < data->variant->num_dai; id++) {
for (i = 0; i < data->variant->num_dai; i++) {
id = data->variant->dai_driver[i].id;
data->mi2s_playback_sd_mode[id] = LPAIF_I2SCTL_MODE_8CH;
data->mi2s_capture_sd_mode[id] = LPAIF_I2SCTL_MODE_8CH;
}

9
sound/usb/pcm.c
View File

@@ -533,6 +533,8 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
if (snd_usb_endpoint_compatible(chip, subs->data_endpoint,
fmt, hw_params))
goto unlock;
if (stop_endpoints(subs, false))
sync_pending_stops(subs);
close_endpoints(chip, subs);
}
@@ -915,9 +917,14 @@ get_sync_ep_from_substream(struct snd_usb_substream *subs)
continue;
/* for the implicit fb, check the sync ep as well */
ep = snd_usb_get_endpoint(chip, fp->sync_ep);
if (ep && ep->cur_audiofmt)
if (ep && ep->cur_audiofmt) {
/* ditto, if the sync (data) ep is used by others,
* this stream is restricted by the sync ep
*/
if (ep != subs->sync_endpoint || ep->opened > 1)
return ep;
}
}
return NULL;
}

199
tools/include/nolibc/arch-aarch64.h Normal file
View File

@@ -0,0 +1,199 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* AARCH64 specific definitions for NOLIBC
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_ARCH_AARCH64_H
#define _NOLIBC_ARCH_AARCH64_H
/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#define O_CREAT 0x40
#define O_EXCL 0x80
#define O_NOCTTY 0x100
#define O_TRUNC 0x200
#define O_APPEND 0x400
#define O_NONBLOCK 0x800
#define O_DIRECTORY 0x4000
/* The struct returned by the newfstatat() syscall. Differs slightly from the
* x86_64's stat one by field ordering, so be careful.
*/
struct sys_stat_struct {
unsigned long st_dev;
unsigned long st_ino;
unsigned int st_mode;
unsigned int st_nlink;
unsigned int st_uid;
unsigned int st_gid;
unsigned long st_rdev;
unsigned long __pad1;
long st_size;
int st_blksize;
int __pad2;
long st_blocks;
long st_atime;
unsigned long st_atime_nsec;
long st_mtime;
unsigned long st_mtime_nsec;
long st_ctime;
unsigned long st_ctime_nsec;
unsigned int __unused[2];
};
/* Syscalls for AARCH64 :
* - registers are 64-bit
* - stack is 16-byte aligned
* - syscall number is passed in x8
* - arguments are in x0, x1, x2, x3, x4, x5
* - the system call is performed by calling svc 0
* - syscall return comes in x0.
* - the arguments are cast to long and assigned into the target registers
* which are then simply passed as registers to the asm code, so that we
* don't have to experience issues with register constraints.
*
* On aarch64, select() is not implemented so we have to use pselect6().
*/
#define __ARCH_WANT_SYS_PSELECT6
#define my_syscall0(num) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0"); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall1(num, arg1) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0") = (long)(arg1); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall2(num, arg1, arg2) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0") = (long)(arg1); \
register long _arg2 asm("x1") = (long)(arg2); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), "r"(_arg2), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall3(num, arg1, arg2, arg3) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0") = (long)(arg1); \
register long _arg2 asm("x1") = (long)(arg2); \
register long _arg3 asm("x2") = (long)(arg3); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall4(num, arg1, arg2, arg3, arg4) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0") = (long)(arg1); \
register long _arg2 asm("x1") = (long)(arg2); \
register long _arg3 asm("x2") = (long)(arg3); \
register long _arg4 asm("x3") = (long)(arg4); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0") = (long)(arg1); \
register long _arg2 asm("x1") = (long)(arg2); \
register long _arg3 asm("x2") = (long)(arg3); \
register long _arg4 asm("x3") = (long)(arg4); \
register long _arg5 asm("x4") = (long)(arg5); \
\
asm volatile ( \
"svc #0\n" \
: "=r" (_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
({ \
register long _num asm("x8") = (num); \
register long _arg1 asm("x0") = (long)(arg1); \
register long _arg2 asm("x1") = (long)(arg2); \
register long _arg3 asm("x2") = (long)(arg3); \
register long _arg4 asm("x3") = (long)(arg4); \
register long _arg5 asm("x4") = (long)(arg5); \
register long _arg6 asm("x5") = (long)(arg6); \
\
asm volatile ( \
"svc #0\n" \
: "=r" (_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"r"(_arg6), "r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
/* startup code */
asm(".section .text\n"
".weak _start\n"
"_start:\n"
"ldr x0, [sp]\n" // argc (x0) was in the stack
"add x1, sp, 8\n" // argv (x1) = sp
"lsl x2, x0, 3\n" // envp (x2) = 8*argc ...
"add x2, x2, 8\n" // + 8 (skip null)
"add x2, x2, x1\n" // + argv
"and sp, x1, -16\n" // sp must be 16-byte aligned in the callee
"bl main\n" // main() returns the status code, we'll exit with it.
"mov x8, 93\n" // NR_exit == 93
"svc #0\n"
"");
#endif // _NOLIBC_ARCH_AARCH64_H

204
tools/include/nolibc/arch-arm.h Normal file
View File

@@ -0,0 +1,204 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* ARM specific definitions for NOLIBC
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_ARCH_ARM_H
#define _NOLIBC_ARCH_ARM_H
/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#define O_CREAT 0x40
#define O_EXCL 0x80
#define O_NOCTTY 0x100
#define O_TRUNC 0x200
#define O_APPEND 0x400
#define O_NONBLOCK 0x800
#define O_DIRECTORY 0x4000
/* The struct returned by the stat() syscall, 32-bit only, the syscall returns
* exactly 56 bytes (stops before the unused array). In big endian, the format
* differs as devices are returned as short only.
*/
struct sys_stat_struct {
#if defined(__ARMEB__)
unsigned short st_dev;
unsigned short __pad1;
#else
unsigned long st_dev;
#endif
unsigned long st_ino;
unsigned short st_mode;
unsigned short st_nlink;
unsigned short st_uid;
unsigned short st_gid;
#if defined(__ARMEB__)
unsigned short st_rdev;
unsigned short __pad2;
#else
unsigned long st_rdev;
#endif
unsigned long st_size;
unsigned long st_blksize;
unsigned long st_blocks;
unsigned long st_atime;
unsigned long st_atime_nsec;
unsigned long st_mtime;
unsigned long st_mtime_nsec;
unsigned long st_ctime;
unsigned long st_ctime_nsec;
unsigned long __unused[2];
};
/* Syscalls for ARM in ARM or Thumb modes :
* - registers are 32-bit
* - stack is 8-byte aligned
* ( http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka4127.html)
* - syscall number is passed in r7
* - arguments are in r0, r1, r2, r3, r4, r5
* - the system call is performed by calling svc #0
* - syscall return comes in r0.
* - only lr is clobbered.
* - the arguments are cast to long and assigned into the target registers
* which are then simply passed as registers to the asm code, so that we
* don't have to experience issues with register constraints.
* - the syscall number is always specified last in order to allow to force
* some registers before (gcc refuses a %-register at the last position).
*
* Also, ARM supports the old_select syscall if newselect is not available
*/
#define __ARCH_WANT_SYS_OLD_SELECT
#define my_syscall0(num) \
({ \
register long _num asm("r7") = (num); \
register long _arg1 asm("r0"); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_num) \
: "memory", "cc", "lr" \
); \
_arg1; \
})
#define my_syscall1(num, arg1) \
({ \
register long _num asm("r7") = (num); \
register long _arg1 asm("r0") = (long)(arg1); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), \
"r"(_num) \
: "memory", "cc", "lr" \
); \
_arg1; \
})
#define my_syscall2(num, arg1, arg2) \
({ \
register long _num asm("r7") = (num); \
register long _arg1 asm("r0") = (long)(arg1); \
register long _arg2 asm("r1") = (long)(arg2); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), "r"(_arg2), \
"r"(_num) \
: "memory", "cc", "lr" \
); \
_arg1; \
})
#define my_syscall3(num, arg1, arg2, arg3) \
({ \
register long _num asm("r7") = (num); \
register long _arg1 asm("r0") = (long)(arg1); \
register long _arg2 asm("r1") = (long)(arg2); \
register long _arg3 asm("r2") = (long)(arg3); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), \
"r"(_num) \
: "memory", "cc", "lr" \
); \
_arg1; \
})
#define my_syscall4(num, arg1, arg2, arg3, arg4) \
({ \
register long _num asm("r7") = (num); \
register long _arg1 asm("r0") = (long)(arg1); \
register long _arg2 asm("r1") = (long)(arg2); \
register long _arg3 asm("r2") = (long)(arg3); \
register long _arg4 asm("r3") = (long)(arg4); \
\
asm volatile ( \
"svc #0\n" \
: "=r"(_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
"r"(_num) \
: "memory", "cc", "lr" \
); \
_arg1; \
})
#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
({ \
register long _num asm("r7") = (num); \
register long _arg1 asm("r0") = (long)(arg1); \
register long _arg2 asm("r1") = (long)(arg2); \
register long _arg3 asm("r2") = (long)(arg3); \
register long _arg4 asm("r3") = (long)(arg4); \
register long _arg5 asm("r4") = (long)(arg5); \
\
asm volatile ( \
"svc #0\n" \
: "=r" (_arg1) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"r"(_num) \
: "memory", "cc", "lr" \
); \
_arg1; \
})
/* startup code */
asm(".section .text\n"
".weak _start\n"
"_start:\n"
#if defined(__THUMBEB__) || defined(__THUMBEL__)
/* We enter here in 32-bit mode but if some previous functions were in
* 16-bit mode, the assembler cannot know, so we need to tell it we're in
* 32-bit now, then switch to 16-bit (is there a better way to do it than
* adding 1 by hand ?) and tell the asm we're now in 16-bit mode so that
* it generates correct instructions. Note that we do not support thumb1.
*/
".code 32\n"
"add r0, pc, #1\n"
"bx r0\n"
".code 16\n"
#endif
"pop {%r0}\n" // argc was in the stack
"mov %r1, %sp\n" // argv = sp
"add %r2, %r1, %r0, lsl #2\n" // envp = argv + 4*argc ...
"add %r2, %r2, $4\n" // ... + 4
"and %r3, %r1, $-8\n" // AAPCS : sp must be 8-byte aligned in the
"mov %sp, %r3\n" // callee, an bl doesn't push (lr=pc)
"bl main\n" // main() returns the status code, we'll exit with it.
"movs r7, $1\n" // NR_exit == 1
"svc $0x00\n"
"");
#endif // _NOLIBC_ARCH_ARM_H

196
tools/include/nolibc/arch-i386.h Normal file
View File

@@ -0,0 +1,196 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* i386 specific definitions for NOLIBC
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_ARCH_I386_H
#define _NOLIBC_ARCH_I386_H
/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#define O_CREAT 0x40
#define O_EXCL 0x80
#define O_NOCTTY 0x100
#define O_TRUNC 0x200
#define O_APPEND 0x400
#define O_NONBLOCK 0x800
#define O_DIRECTORY 0x10000
/* The struct returned by the stat() syscall, 32-bit only, the syscall returns
* exactly 56 bytes (stops before the unused array).
*/
struct sys_stat_struct {
unsigned long st_dev;
unsigned long st_ino;
unsigned short st_mode;
unsigned short st_nlink;
unsigned short st_uid;
unsigned short st_gid;
unsigned long st_rdev;
unsigned long st_size;
unsigned long st_blksize;
unsigned long st_blocks;
unsigned long st_atime;
unsigned long st_atime_nsec;
unsigned long st_mtime;
unsigned long st_mtime_nsec;
unsigned long st_ctime;
unsigned long st_ctime_nsec;
unsigned long __unused[2];
};
/* Syscalls for i386 :
* - mostly similar to x86_64
* - registers are 32-bit
* - syscall number is passed in eax
* - arguments are in ebx, ecx, edx, esi, edi, ebp respectively
* - all registers are preserved (except eax of course)
* - the system call is performed by calling int $0x80
* - syscall return comes in eax
* - the arguments are cast to long and assigned into the target registers
* which are then simply passed as registers to the asm code, so that we
* don't have to experience issues with register constraints.
* - the syscall number is always specified last in order to allow to force
* some registers before (gcc refuses a %-register at the last position).
*
* Also, i386 supports the old_select syscall if newselect is not available
*/
#define __ARCH_WANT_SYS_OLD_SELECT
#define my_syscall0(num) \
({ \
long _ret; \
register long _num asm("eax") = (num); \
\
asm volatile ( \
"int $0x80\n" \
: "=a" (_ret) \
: "0"(_num) \
: "memory", "cc" \
); \
_ret; \
})
#define my_syscall1(num, arg1) \
({ \
long _ret; \
register long _num asm("eax") = (num); \
register long _arg1 asm("ebx") = (long)(arg1); \
\
asm volatile ( \
"int $0x80\n" \
: "=a" (_ret) \
: "r"(_arg1), \
"0"(_num) \
: "memory", "cc" \
); \
_ret; \
})
#define my_syscall2(num, arg1, arg2) \
({ \
long _ret; \
register long _num asm("eax") = (num); \
register long _arg1 asm("ebx") = (long)(arg1); \
register long _arg2 asm("ecx") = (long)(arg2); \
\
asm volatile ( \
"int $0x80\n" \
: "=a" (_ret) \
: "r"(_arg1), "r"(_arg2), \
"0"(_num) \
: "memory", "cc" \
); \
_ret; \
})
#define my_syscall3(num, arg1, arg2, arg3) \
({ \
long _ret; \
register long _num asm("eax") = (num); \
register long _arg1 asm("ebx") = (long)(arg1); \
register long _arg2 asm("ecx") = (long)(arg2); \
register long _arg3 asm("edx") = (long)(arg3); \
\
asm volatile ( \
"int $0x80\n" \
: "=a" (_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), \
"0"(_num) \
: "memory", "cc" \
); \
_ret; \
})
#define my_syscall4(num, arg1, arg2, arg3, arg4) \
({ \
long _ret; \
register long _num asm("eax") = (num); \
register long _arg1 asm("ebx") = (long)(arg1); \
register long _arg2 asm("ecx") = (long)(arg2); \
register long _arg3 asm("edx") = (long)(arg3); \
register long _arg4 asm("esi") = (long)(arg4); \
\
asm volatile ( \
"int $0x80\n" \
: "=a" (_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
"0"(_num) \
: "memory", "cc" \
); \
_ret; \
})
#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
({ \
long _ret; \
register long _num asm("eax") = (num); \
register long _arg1 asm("ebx") = (long)(arg1); \
register long _arg2 asm("ecx") = (long)(arg2); \
register long _arg3 asm("edx") = (long)(arg3); \
register long _arg4 asm("esi") = (long)(arg4); \
register long _arg5 asm("edi") = (long)(arg5); \
\
asm volatile ( \
"int $0x80\n" \
: "=a" (_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"0"(_num) \
: "memory", "cc" \
); \
_ret; \
})
/* startup code */
/*
* i386 System V ABI mandates:
* 1) last pushed argument must be 16-byte aligned.
* 2) The deepest stack frame should be set to zero
*
*/
asm(".section .text\n"
".weak _start\n"
"_start:\n"
"pop %eax\n" // argc (first arg, %eax)
"mov %esp, %ebx\n" // argv[] (second arg, %ebx)
"lea 4(%ebx,%eax,4),%ecx\n" // then a NULL then envp (third arg, %ecx)
"xor %ebp, %ebp\n" // zero the stack frame
"and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned before
"sub $4, %esp\n" // the call instruction (args are aligned)
"push %ecx\n" // push all registers on the stack so that we
"push %ebx\n" // support both regparm and plain stack modes
"push %eax\n"
"call main\n" // main() returns the status code in %eax
"mov %eax, %ebx\n" // retrieve exit code (32-bit int)
"movl $1, %eax\n" // NR_exit == 1
"int $0x80\n" // exit now
"hlt\n" // ensure it does not
"");
#endif // _NOLIBC_ARCH_I386_H

217
tools/include/nolibc/arch-mips.h Normal file
View File

@@ -0,0 +1,217 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* MIPS specific definitions for NOLIBC
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_ARCH_MIPS_H
#define _NOLIBC_ARCH_MIPS_H
/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#define O_APPEND 0x0008
#define O_NONBLOCK 0x0080
#define O_CREAT 0x0100
#define O_TRUNC 0x0200
#define O_EXCL 0x0400
#define O_NOCTTY 0x0800
#define O_DIRECTORY 0x10000
/* The struct returned by the stat() syscall. 88 bytes are returned by the
* syscall.
*/
struct sys_stat_struct {
unsigned int st_dev;
long st_pad1[3];
unsigned long st_ino;
unsigned int st_mode;
unsigned int st_nlink;
unsigned int st_uid;
unsigned int st_gid;
unsigned int st_rdev;
long st_pad2[2];
long st_size;
long st_pad3;
long st_atime;
long st_atime_nsec;
long st_mtime;
long st_mtime_nsec;
long st_ctime;
long st_ctime_nsec;
long st_blksize;
long st_blocks;
long st_pad4[14];
};
/* Syscalls for MIPS ABI O32 :
* - WARNING! there's always a delayed slot!
* - WARNING again, the syntax is different, registers take a '$' and numbers
* do not.
* - registers are 32-bit
* - stack is 8-byte aligned
* - syscall number is passed in v0 (starts at 0xfa0).
* - arguments are in a0, a1, a2, a3, then the stack. The caller needs to
* leave some room in the stack for the callee to save a0..a3 if needed.
* - Many registers are clobbered, in fact only a0..a2 and s0..s8 are
* preserved. See: https://www.linux-mips.org/wiki/Syscall as well as
* scall32-o32.S in the kernel sources.
* - the system call is performed by calling "syscall"
* - syscall return comes in v0, and register a3 needs to be checked to know
* if an error occurred, in which case errno is in v0.
* - the arguments are cast to long and assigned into the target registers
* which are then simply passed as registers to the asm code, so that we
* don't have to experience issues with register constraints.
*/
#define my_syscall0(num) \
({ \
register long _num asm("v0") = (num); \
register long _arg4 asm("a3"); \
\
asm volatile ( \
"addiu $sp, $sp, -32\n" \
"syscall\n" \
"addiu $sp, $sp, 32\n" \
: "=r"(_num), "=r"(_arg4) \
: "r"(_num) \
: "memory", "cc", "at", "v1", "hi", "lo", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
); \
_arg4 ? -_num : _num; \
})
#define my_syscall1(num, arg1) \
({ \
register long _num asm("v0") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg4 asm("a3"); \
\
asm volatile ( \
"addiu $sp, $sp, -32\n" \
"syscall\n" \
"addiu $sp, $sp, 32\n" \
: "=r"(_num), "=r"(_arg4) \
: "0"(_num), \
"r"(_arg1) \
: "memory", "cc", "at", "v1", "hi", "lo", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
); \
_arg4 ? -_num : _num; \
})
#define my_syscall2(num, arg1, arg2) \
({ \
register long _num asm("v0") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg4 asm("a3"); \
\
asm volatile ( \
"addiu $sp, $sp, -32\n" \
"syscall\n" \
"addiu $sp, $sp, 32\n" \
: "=r"(_num), "=r"(_arg4) \
: "0"(_num), \
"r"(_arg1), "r"(_arg2) \
: "memory", "cc", "at", "v1", "hi", "lo", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
); \
_arg4 ? -_num : _num; \
})
#define my_syscall3(num, arg1, arg2, arg3) \
({ \
register long _num asm("v0") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
register long _arg4 asm("a3"); \
\
asm volatile ( \
"addiu $sp, $sp, -32\n" \
"syscall\n" \
"addiu $sp, $sp, 32\n" \
: "=r"(_num), "=r"(_arg4) \
: "0"(_num), \
"r"(_arg1), "r"(_arg2), "r"(_arg3) \
: "memory", "cc", "at", "v1", "hi", "lo", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
); \
_arg4 ? -_num : _num; \
})
#define my_syscall4(num, arg1, arg2, arg3, arg4) \
({ \
register long _num asm("v0") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
register long _arg4 asm("a3") = (long)(arg4); \
\
asm volatile ( \
"addiu $sp, $sp, -32\n" \
"syscall\n" \
"addiu $sp, $sp, 32\n" \
: "=r" (_num), "=r"(_arg4) \
: "0"(_num), \
"r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4) \
: "memory", "cc", "at", "v1", "hi", "lo", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
); \
_arg4 ? -_num : _num; \
})
#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
({ \
register long _num asm("v0") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
register long _arg4 asm("a3") = (long)(arg4); \
register long _arg5 = (long)(arg5); \
\
asm volatile ( \
"addiu $sp, $sp, -32\n" \
"sw %7, 16($sp)\n" \
"syscall\n " \
"addiu $sp, $sp, 32\n" \
: "=r" (_num), "=r"(_arg4) \
: "0"(_num), \
"r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5) \
: "memory", "cc", "at", "v1", "hi", "lo", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
); \
_arg4 ? -_num : _num; \
})
/* startup code, note that it's called __start on MIPS */
asm(".section .text\n"
".weak __start\n"
".set nomips16\n"
".set push\n"
".set noreorder\n"
".option pic0\n"
".ent __start\n"
"__start:\n"
"lw $a0,($sp)\n" // argc was in the stack
"addiu $a1, $sp, 4\n" // argv = sp + 4
"sll $a2, $a0, 2\n" // a2 = argc * 4
"add $a2, $a2, $a1\n" // envp = argv + 4*argc ...
"addiu $a2, $a2, 4\n" // ... + 4
"li $t0, -8\n"
"and $sp, $sp, $t0\n" // sp must be 8-byte aligned
"addiu $sp,$sp,-16\n" // the callee expects to save a0..a3 there!
"jal main\n" // main() returns the status code, we'll exit with it.
"nop\n" // delayed slot
"move $a0, $v0\n" // retrieve 32-bit exit code from v0
"li $v0, 4001\n" // NR_exit == 4001
"syscall\n"
".end __start\n"
".set pop\n"
"");
#endif // _NOLIBC_ARCH_MIPS_H

204
tools/include/nolibc/arch-riscv.h Normal file
View File

@@ -0,0 +1,204 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* RISCV (32 and 64) specific definitions for NOLIBC
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_ARCH_RISCV_H
#define _NOLIBC_ARCH_RISCV_H
/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#define O_CREAT 0x40
#define O_EXCL 0x80
#define O_NOCTTY 0x100
#define O_TRUNC 0x200
#define O_APPEND 0x400
#define O_NONBLOCK 0x800
#define O_DIRECTORY 0x10000
struct sys_stat_struct {
unsigned long st_dev; /* Device. */
unsigned long st_ino; /* File serial number. */
unsigned int st_mode; /* File mode. */
unsigned int st_nlink; /* Link count. */
unsigned int st_uid; /* User ID of the file's owner. */
unsigned int st_gid; /* Group ID of the file's group. */
unsigned long st_rdev; /* Device number, if device. */
unsigned long __pad1;
long st_size; /* Size of file, in bytes. */
int st_blksize; /* Optimal block size for I/O. */
int __pad2;
long st_blocks; /* Number 512-byte blocks allocated. */
long st_atime; /* Time of last access. */
unsigned long st_atime_nsec;
long st_mtime; /* Time of last modification. */
unsigned long st_mtime_nsec;
long st_ctime; /* Time of last status change. */
unsigned long st_ctime_nsec;
unsigned int __unused4;
unsigned int __unused5;
};
#if __riscv_xlen == 64
#define PTRLOG "3"
#define SZREG "8"
#elif __riscv_xlen == 32
#define PTRLOG "2"
#define SZREG "4"
#endif
/* Syscalls for RISCV :
* - stack is 16-byte aligned
* - syscall number is passed in a7
* - arguments are in a0, a1, a2, a3, a4, a5
* - the system call is performed by calling ecall
* - syscall return comes in a0
* - the arguments are cast to long and assigned into the target
* registers which are then simply passed as registers to the asm code,
* so that we don't have to experience issues with register constraints.
*
* On riscv, select() is not implemented so we have to use pselect6().
*/
#define __ARCH_WANT_SYS_PSELECT6
#define my_syscall0(num) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0"); \
\
asm volatile ( \
"ecall\n\t" \
: "=r"(_arg1) \
: "r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall1(num, arg1) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
\
asm volatile ( \
"ecall\n" \
: "+r"(_arg1) \
: "r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall2(num, arg1, arg2) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
\
asm volatile ( \
"ecall\n" \
: "+r"(_arg1) \
: "r"(_arg2), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall3(num, arg1, arg2, arg3) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
\
asm volatile ( \
"ecall\n\t" \
: "+r"(_arg1) \
: "r"(_arg2), "r"(_arg3), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall4(num, arg1, arg2, arg3, arg4) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
register long _arg4 asm("a3") = (long)(arg4); \
\
asm volatile ( \
"ecall\n" \
: "+r"(_arg1) \
: "r"(_arg2), "r"(_arg3), "r"(_arg4), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
register long _arg4 asm("a3") = (long)(arg4); \
register long _arg5 asm("a4") = (long)(arg5); \
\
asm volatile ( \
"ecall\n" \
: "+r"(_arg1) \
: "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
({ \
register long _num asm("a7") = (num); \
register long _arg1 asm("a0") = (long)(arg1); \
register long _arg2 asm("a1") = (long)(arg2); \
register long _arg3 asm("a2") = (long)(arg3); \
register long _arg4 asm("a3") = (long)(arg4); \
register long _arg5 asm("a4") = (long)(arg5); \
register long _arg6 asm("a5") = (long)(arg6); \
\
asm volatile ( \
"ecall\n" \
: "+r"(_arg1) \
: "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), "r"(_arg6), \
"r"(_num) \
: "memory", "cc" \
); \
_arg1; \
})
/* startup code */
asm(".section .text\n"
".weak _start\n"
"_start:\n"
".option push\n"
".option norelax\n"
"lla gp, __global_pointer$\n"
".option pop\n"
"ld a0, 0(sp)\n" // argc (a0) was in the stack
"add a1, sp, "SZREG"\n" // argv (a1) = sp
"slli a2, a0, "PTRLOG"\n" // envp (a2) = SZREG*argc ...
"add a2, a2, "SZREG"\n" // + SZREG (skip null)
"add a2,a2,a1\n" // + argv
"andi sp,a1,-16\n" // sp must be 16-byte aligned
"call main\n" // main() returns the status code, we'll exit with it.
"li a7, 93\n" // NR_exit == 93
"ecall\n"
"");
#endif // _NOLIBC_ARCH_RISCV_H

215
tools/include/nolibc/arch-x86_64.h Normal file
View File

@@ -0,0 +1,215 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* x86_64 specific definitions for NOLIBC
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_ARCH_X86_64_H
#define _NOLIBC_ARCH_X86_64_H
/* O_* macros for fcntl/open are architecture-specific */
#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR 2
#define O_CREAT 0x40
#define O_EXCL 0x80
#define O_NOCTTY 0x100
#define O_TRUNC 0x200
#define O_APPEND 0x400
#define O_NONBLOCK 0x800
#define O_DIRECTORY 0x10000
/* The struct returned by the stat() syscall, equivalent to stat64(). The
* syscall returns 116 bytes and stops in the middle of __unused.
*/
struct sys_stat_struct {
unsigned long st_dev;
unsigned long st_ino;
unsigned long st_nlink;
unsigned int st_mode;
unsigned int st_uid;
unsigned int st_gid;
unsigned int __pad0;
unsigned long st_rdev;
long st_size;
long st_blksize;
long st_blocks;
unsigned long st_atime;
unsigned long st_atime_nsec;
unsigned long st_mtime;
unsigned long st_mtime_nsec;
unsigned long st_ctime;
unsigned long st_ctime_nsec;
long __unused[3];
};
/* Syscalls for x86_64 :
* - registers are 64-bit
* - syscall number is passed in rax
* - arguments are in rdi, rsi, rdx, r10, r8, r9 respectively
* - the system call is performed by calling the syscall instruction
* - syscall return comes in rax
* - rcx and r11 are clobbered, others are preserved.
* - the arguments are cast to long and assigned into the target registers
* which are then simply passed as registers to the asm code, so that we
* don't have to experience issues with register constraints.
* - the syscall number is always specified last in order to allow to force
* some registers before (gcc refuses a %-register at the last position).
* - see also x86-64 ABI section A.2 AMD64 Linux Kernel Conventions, A.2.1
* Calling Conventions.
*
* Link x86-64 ABI: https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/x86-64-psABI
*
*/
#define my_syscall0(num) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
#define my_syscall1(num, arg1) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
register long _arg1 asm("rdi") = (long)(arg1); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "r"(_arg1), \
"0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
#define my_syscall2(num, arg1, arg2) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
register long _arg1 asm("rdi") = (long)(arg1); \
register long _arg2 asm("rsi") = (long)(arg2); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "r"(_arg1), "r"(_arg2), \
"0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
#define my_syscall3(num, arg1, arg2, arg3) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
register long _arg1 asm("rdi") = (long)(arg1); \
register long _arg2 asm("rsi") = (long)(arg2); \
register long _arg3 asm("rdx") = (long)(arg3); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), \
"0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
#define my_syscall4(num, arg1, arg2, arg3, arg4) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
register long _arg1 asm("rdi") = (long)(arg1); \
register long _arg2 asm("rsi") = (long)(arg2); \
register long _arg3 asm("rdx") = (long)(arg3); \
register long _arg4 asm("r10") = (long)(arg4); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
"0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
register long _arg1 asm("rdi") = (long)(arg1); \
register long _arg2 asm("rsi") = (long)(arg2); \
register long _arg3 asm("rdx") = (long)(arg3); \
register long _arg4 asm("r10") = (long)(arg4); \
register long _arg5 asm("r8") = (long)(arg5); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
({ \
long _ret; \
register long _num asm("rax") = (num); \
register long _arg1 asm("rdi") = (long)(arg1); \
register long _arg2 asm("rsi") = (long)(arg2); \
register long _arg3 asm("rdx") = (long)(arg3); \
register long _arg4 asm("r10") = (long)(arg4); \
register long _arg5 asm("r8") = (long)(arg5); \
register long _arg6 asm("r9") = (long)(arg6); \
\
asm volatile ( \
"syscall\n" \
: "=a"(_ret) \
: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
"r"(_arg6), "0"(_num) \
: "rcx", "r11", "memory", "cc" \
); \
_ret; \
})
/* startup code */
/*
* x86-64 System V ABI mandates:
* 1) %rsp must be 16-byte aligned right before the function call.
* 2) The deepest stack frame should be zero (the %rbp).
*
*/
asm(".section .text\n"
".weak _start\n"
"_start:\n"
"pop %rdi\n" // argc (first arg, %rdi)
"mov %rsp, %rsi\n" // argv[] (second arg, %rsi)
"lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx)
"xor %ebp, %ebp\n" // zero the stack frame
"and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
"call main\n" // main() returns the status code, we'll exit with it.
"mov %eax, %edi\n" // retrieve exit code (32 bit)
"mov $60, %eax\n" // NR_exit == 60
"syscall\n" // really exit
"hlt\n" // ensure it does not return
"");
#endif // _NOLIBC_ARCH_X86_64_H

32
tools/include/nolibc/arch.h Normal file
View File

@@ -0,0 +1,32 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
*/
/* Below comes the architecture-specific code. For each architecture, we have
* the syscall declarations and the _start code definition. This is the only
* global part. On all architectures the kernel puts everything in the stack
* before jumping to _start just above us, without any return address (_start
* is not a function but an entry pint). So at the stack pointer we find argc.
* Then argv[] begins, and ends at the first NULL. Then we have envp which
* starts and ends with a NULL as well. So envp=argv+argc+1.
*/
#ifndef _NOLIBC_ARCH_H
#define _NOLIBC_ARCH_H
#if defined(__x86_64__)
#include "arch-x86_64.h"
#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
#include "arch-i386.h"
#elif defined(__ARM_EABI__)
#include "arch-arm.h"
#elif defined(__aarch64__)
#include "arch-aarch64.h"
#elif defined(__mips__) && defined(_ABIO32)
#include "arch-mips.h"
#elif defined(__riscv)
#include "arch-riscv.h"
#endif
#endif /* _NOLIBC_ARCH_H */

1331
tools/include/nolibc/nolibc.h
View File

File diff suppressed because it is too large Load Diff

49
tools/include/nolibc/std.h Normal file
View File

@@ -0,0 +1,49 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* Standard definitions and types for NOLIBC
* Copyright (C) 2017-2021 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_STD_H
#define _NOLIBC_STD_H
/* Declare a few quite common macros and types that usually are in stdlib.h,
* stdint.h, ctype.h, unistd.h and a few other common locations. Please place
* integer type definitions and generic macros here, but avoid OS-specific and
* syscall-specific stuff, as this file is expected to be included very early.
*/
/* note: may already be defined */
#ifndef NULL
#define NULL ((void *)0)
#endif
/* stdint types */
typedef unsigned char uint8_t;
typedef signed char int8_t;
typedef unsigned short uint16_t;
typedef signed short int16_t;
typedef unsigned int uint32_t;
typedef signed int int32_t;
typedef unsigned long long uint64_t;
typedef signed long long int64_t;
typedef unsigned long size_t;
typedef signed long ssize_t;
typedef unsigned long uintptr_t;
typedef signed long intptr_t;
typedef signed long ptrdiff_t;
/* those are commonly provided by sys/types.h */
typedef unsigned int dev_t;
typedef unsigned long ino_t;
typedef unsigned int mode_t;
typedef signed int pid_t;
typedef unsigned int uid_t;
typedef unsigned int gid_t;
typedef unsigned long nlink_t;
typedef signed long off_t;
typedef signed long blksize_t;
typedef signed long blkcnt_t;
typedef signed long time_t;
#endif /* _NOLIBC_STD_H */

133
tools/include/nolibc/types.h Normal file
View File

@@ -0,0 +1,133 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* Special types used by various syscalls for NOLIBC
* Copyright (C) 2017-2021 Willy Tarreau <w@1wt.eu>
*/
#ifndef _NOLIBC_TYPES_H
#define _NOLIBC_TYPES_H
#include "std.h"
#include <linux/time.h>
/* Only the generic macros and types may be defined here. The arch-specific
* ones such as the O_RDONLY and related macros used by fcntl() and open(), or
* the layout of sys_stat_struct must not be defined here.
*/
/* stat flags (WARNING, octal here) */
#define S_IFDIR 0040000
#define S_IFCHR 0020000
#define S_IFBLK 0060000
#define S_IFREG 0100000
#define S_IFIFO 0010000
#define S_IFLNK 0120000
#define S_IFSOCK 0140000
#define S_IFMT 0170000
#define S_ISDIR(mode) (((mode) & S_IFDIR) == S_IFDIR)
#define S_ISCHR(mode) (((mode) & S_IFCHR) == S_IFCHR)
#define S_ISBLK(mode) (((mode) & S_IFBLK) == S_IFBLK)
#define S_ISREG(mode) (((mode) & S_IFREG) == S_IFREG)
#define S_ISFIFO(mode) (((mode) & S_IFIFO) == S_IFIFO)
#define S_ISLNK(mode) (((mode) & S_IFLNK) == S_IFLNK)
#define S_ISSOCK(mode) (((mode) & S_IFSOCK) == S_IFSOCK)
/* dirent types */
#define DT_UNKNOWN 0x0
#define DT_FIFO 0x1
#define DT_CHR 0x2
#define DT_DIR 0x4
#define DT_BLK 0x6
#define DT_REG 0x8
#define DT_LNK 0xa
#define DT_SOCK 0xc
/* commonly an fd_set represents 256 FDs */
#define FD_SETSIZE 256
/* Special FD used by all the *at functions */
#ifndef AT_FDCWD
#define AT_FDCWD (-100)
#endif
/* whence values for lseek() */
#define SEEK_SET 0
#define SEEK_CUR 1
#define SEEK_END 2
/* cmd for reboot() */
#define LINUX_REBOOT_MAGIC1 0xfee1dead
#define LINUX_REBOOT_MAGIC2 0x28121969
#define LINUX_REBOOT_CMD_HALT 0xcdef0123
#define LINUX_REBOOT_CMD_POWER_OFF 0x4321fedc
#define LINUX_REBOOT_CMD_RESTART 0x01234567
#define LINUX_REBOOT_CMD_SW_SUSPEND 0xd000fce2
/* Macros used on waitpid()'s return status */
#define WEXITSTATUS(status) (((status) & 0xff00) >> 8)
#define WIFEXITED(status) (((status) & 0x7f) == 0)
/* for select() */
typedef struct {
uint32_t fd32[FD_SETSIZE / 32];
} fd_set;
/* for poll() */
struct pollfd {
int fd;
short int events;
short int revents;
};
/* for getdents64() */
struct linux_dirent64 {
uint64_t d_ino;
int64_t d_off;
unsigned short d_reclen;
unsigned char d_type;
char d_name[];
};
/* needed by wait4() */
struct rusage {
struct timeval ru_utime;
struct timeval ru_stime;
long ru_maxrss;
long ru_ixrss;
long ru_idrss;
long ru_isrss;
long ru_minflt;
long ru_majflt;
long ru_nswap;
long ru_inblock;
long ru_oublock;
long ru_msgsnd;
long ru_msgrcv;
long ru_nsignals;
long ru_nvcsw;
long ru_nivcsw;
};
/* The format of the struct as returned by the libc to the application, which
* significantly differs from the format returned by the stat() syscall flavours.
*/
struct stat {
dev_t st_dev; /* ID of device containing file */
ino_t st_ino; /* inode number */
mode_t st_mode; /* protection */
nlink_t st_nlink; /* number of hard links */
uid_t st_uid; /* user ID of owner */
gid_t st_gid; /* group ID of owner */
dev_t st_rdev; /* device ID (if special file) */
off_t st_size; /* total size, in bytes */
blksize_t st_blksize; /* blocksize for file system I/O */
blkcnt_t st_blocks; /* number of 512B blocks allocated */
time_t st_atime; /* time of last access */
time_t st_mtime; /* time of last modification */
time_t st_ctime; /* time of last status change */
};
#endif /* _NOLIBC_TYPES_H */

2
tools/perf/builtin-trace.c
View File

@@ -17,7 +17,9 @@
#include "util/record.h"
#include <traceevent/event-parse.h>
#include <api/fs/tracing_path.h>
#ifdef HAVE_LIBBPF_SUPPORT
#include <bpf/bpf.h>
#endif
#include "util/bpf_map.h"
#include "util/rlimit.h"
#include "builtin.h"

2
tools/perf/util/auxtrace.c
View File

@@ -2545,7 +2545,7 @@ static int find_dso_sym(struct dso *dso, const char *sym_name, u64 *start,
*size = sym->start - *start;
if (idx > 0) {
if (*size)
return 1;
return 0;
} else if (dso_sym_match(sym, sym_name, &cnt, idx)) {
print_duplicate_syms(dso, sym_name);
return -EINVAL;

6
tools/perf/util/bpf_counter.h
View File

@@ -4,9 +4,12 @@
#include <linux/list.h>
#include <sys/resource.h>
#ifdef HAVE_LIBBPF_SUPPORT
#include <bpf/bpf.h>
#include <bpf/btf.h>
#include <bpf/libbpf.h>
#endif
struct evsel;
struct target;
@@ -87,6 +90,8 @@ static inline void set_max_rlimit(void)
setrlimit(RLIMIT_MEMLOCK, &rinf);
}
#ifdef HAVE_BPF_SKEL
static inline __u32 bpf_link_get_id(int fd)
{
struct bpf_link_info link_info = { .id = 0, };
@@ -127,5 +132,6 @@ static inline int bperf_trigger_reading(int prog_fd, int cpu)
return bpf_prog_test_run_opts(prog_fd, &opts);
}
#endif /* HAVE_BPF_SKEL */
#endif /* __PERF_BPF_COUNTER_H */

2
tools/testing/selftests/kvm/rseq_test.c
View File

@@ -233,7 +233,7 @@ int main(int argc, char *argv[])
ucall_init(vm, NULL);
pthread_create(&migration_thread, NULL, migration_worker,
(void *)(unsigned long)gettid());
(void *)(unsigned long)syscall(SYS_gettid));
for (i = 0; !done; i++) {
vcpu_run(vm, VCPU_ID);

2
tools/testing/selftests/net/af_unix/test_unix_oob.c
View File

@@ -124,7 +124,7 @@ void producer(struct sockaddr_un *consumer_addr)
wait_for_signal(pipefd[0]);
if (connect(cfd, (struct sockaddr *)consumer_addr,
sizeof(struct sockaddr)) != 0) {
sizeof(*consumer_addr)) != 0) {
perror("Connect failed");
kill(0, SIGTERM);
exit(1);