Merge 5.15.75 into android14-5.15

Changes in 5.15.75
	Revert "fs: check FMODE_LSEEK to control internal pipe splicing"
	ALSA: oss: Fix potential deadlock at unregistration
	ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
	ALSA: usb-audio: Fix potential memory leaks
	ALSA: usb-audio: Fix NULL dererence at error path
	ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
	ALSA: hda/realtek: Correct pin configs for ASUS G533Z
	ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
	ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
	mtd: rawnand: atmel: Unmap streaming DMA mappings
	io_uring/net: don't update msg_name if not provided
	hv_netvsc: Fix race between VF offering and VF association message from host
	cifs: destage dirty pages before re-reading them for cache=none
	cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
	iio: dac: ad5593r: Fix i2c read protocol requirements
	iio: ltc2497: Fix reading conversion results
	iio: adc: ad7923: fix channel readings for some variants
	iio: pressure: dps310: Refactor startup procedure
	iio: pressure: dps310: Reset chip after timeout
	xhci: dbc: Fix memory leak in xhci_alloc_dbc()
	usb: add quirks for Lenovo OneLink+ Dock
	can: kvaser_usb: Fix use of uninitialized completion
	can: kvaser_usb_leaf: Fix overread with an invalid command
	can: kvaser_usb_leaf: Fix TX queue out of sync after restart
	can: kvaser_usb_leaf: Fix CAN state after restart
	mmc: sdhci-sprd: Fix minimum clock limit
	i2c: designware: Fix handling of real but unexpected device interrupts
	fs: dlm: fix race between test_bit() and queue_work()
	fs: dlm: handle -EBUSY first in lock arg validation
	HID: multitouch: Add memory barriers
	quota: Check next/prev free block number after reading from quota file
	platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
	ASoC: wcd9335: fix order of Slimbus unprepare/disable
	ASoC: wcd934x: fix order of Slimbus unprepare/disable
	hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API
	net: thunderbolt: Enable DMA paths only after rings are enabled
	regulator: qcom_rpm: Fix circular deferral regression
	arm64: topology: move store_cpu_topology() to shared code
	riscv: topology: fix default topology reporting
	RISC-V: Make port I/O string accessors actually work
	parisc: fbdev/stifb: Align graphics memory size to 4MB
	riscv: Allow PROT_WRITE-only mmap()
	riscv: Make VM_WRITE imply VM_READ
	riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb
	riscv: Pass -mno-relax only on lld < 15.0.0
	UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
	nvmem: core: Fix memleak in nvmem_register()
	nvme-multipath: fix possible hang in live ns resize with ANA access
	nvme-pci: set min_align_mask before calculating max_hw_sectors
	Revert "drm/amdgpu: use dirty framebuffer helper"
	dmaengine: mxs: use platform_driver_register
	drm/virtio: Check whether transferred 2D BO is shmem
	drm/virtio: Unlock reservations on virtio_gpu_object_shmem_init() error
	drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()
	drm/udl: Restore display mode on resume
	arm64: errata: Add Cortex-A55 to the repeat tlbi list
	mm/damon: validate if the pmd entry is present before accessing
	mm/mmap: undo ->mmap() when arch_validate_flags() fails
	xen/gntdev: Prevent leaking grants
	xen/gntdev: Accommodate VMA splitting
	PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
	serial: 8250: Let drivers request full 16550A feature probing
	serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices
	NFSD: Protect against send buffer overflow in NFSv3 READDIR
	NFSD: Protect against send buffer overflow in NFSv2 READ
	NFSD: Protect against send buffer overflow in NFSv3 READ
	powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
	powerpc/boot: Explicitly disable usage of SPE instructions
	slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure
	slimbus: qcom-ngd: cleanup in probe error path
	scsi: qedf: Populate sysfs attributes for vport
	gpio: rockchip: request GPIO mux to pinctrl when setting direction
	pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
	fbdev: smscufx: Fix use-after-free in ufx_ops_open()
	ksmbd: fix endless loop when encryption for response fails
	ksmbd: Fix wrong return value and message length check in smb2_ioctl()
	ksmbd: Fix user namespace mapping
	fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE
	btrfs: fix race between quota enable and quota rescan ioctl
	btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
	f2fs: complete checkpoints during remount
	f2fs: flush pending checkpoints when freezing super
	f2fs: increase the limit for reserve_root
	f2fs: fix to do sanity check on destination blkaddr during recovery
	f2fs: fix to do sanity check on summary info
	hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
	hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
	jbd2: wake up journal waiters in FIFO order, not LIFO
	jbd2: fix potential buffer head reference count leak
	jbd2: fix potential use-after-free in jbd2_fc_wait_bufs
	jbd2: add miss release buffer head in fc_do_one_pass()
	ext4: avoid crash when inline data creation follows DIO write
	ext4: fix null-ptr-deref in ext4_write_info
	ext4: make ext4_lazyinit_thread freezable
	ext4: fix check for block being out of directory size
	ext4: don't increase iversion counter for ea_inodes
	ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate
	ext4: place buffer head allocation before handle start
	ext4: fix dir corruption when ext4_dx_add_entry() fails
	ext4: fix miss release buffer head in ext4_fc_write_inode
	ext4: fix potential memory leak in ext4_fc_record_modified_inode()
	ext4: fix potential memory leak in ext4_fc_record_regions()
	ext4: update 'state->fc_regions_size' after successful memory allocation
	livepatch: fix race between fork and KLP transition
	ftrace: Properly unset FTRACE_HASH_FL_MOD
	ring-buffer: Allow splice to read previous partially read pages
	ring-buffer: Have the shortest_full queue be the shortest not longest
	ring-buffer: Check pending waiters when doing wake ups as well
	ring-buffer: Add ring_buffer_wake_waiters()
	ring-buffer: Fix race between reset page and reading page
	tracing: Disable interrupt or preemption before acquiring arch_spinlock_t
	tracing: Wake up ring buffer waiters on closing of the file
	tracing: Wake up waiters when tracing is disabled
	tracing: Add ioctl() to force ring buffer waiters to wake up
	tracing: Move duplicate code of trace_kprobe/eprobe.c into header
	tracing: Add "(fault)" name injection to kernel probes
	tracing: Fix reading strings from synthetic events
	thunderbolt: Explicitly enable lane adapter hotplug events at startup
	efi: libstub: drop pointless get_memory_map() call
	media: cedrus: Set the platform driver data earlier
	media: cedrus: Fix endless loop in cedrus_h265_skip_bits()
	blk-wbt: call rq_qos_add() after wb_normal is initialized
	KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
	KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
	KVM: nVMX: Don't propagate vmcs12's PERF_GLOBAL_CTRL settings to vmcs02
	KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS
	staging: greybus: audio_helper: remove unused and wrong debugfs usage
	drm/nouveau/kms/nv140-: Disable interlacing
	drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
	drm/i915: Fix watermark calculations for gen12+ RC CCS modifier
	drm/i915: Fix watermark calculations for gen12+ MC CCS modifier
	drm/i915: Fix watermark calculations for gen12+ CCS+CC modifier
	drm/amd/display: Fix vblank refcount in vrr transition
	smb3: must initialize two ACL struct fields to zero
	selinux: use "grep -E" instead of "egrep"
	ima: fix blocking of security.ima xattrs of unsupported algorithms
	userfaultfd: open userfaultfds with O_RDONLY
	ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
	thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
	sh: machvec: Use char[] for section boundaries
	MIPS: SGI-IP27: Free some unused memory
	MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()
	ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
	ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
	objtool: Preserve special st_shndx indexes in elf_update_symbol
	nfsd: Fix a memory leak in an error handling path
	SUNRPC: Fix svcxdr_init_decode's end-of-buffer calculation
	SUNRPC: Fix svcxdr_init_encode's buflen calculation
	NFSD: Protect against send buffer overflow in NFSv2 READDIR
	NFSD: Fix handling of oversized NFSv4 COMPOUND requests
	wifi: rtlwifi: 8192de: correct checking of IQK reload
	wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
	leds: lm3601x: Don't use mutex after it was destroyed
	bpf: Fix reference state management for synchronous callbacks
	wifi: mac80211: allow bw change during channel switch in mesh
	bpftool: Fix a wrong type cast in btf_dumper_int
	spi: mt7621: Fix an error message in mt7621_spi_probe()
	x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register
	xsk: Fix backpressure mechanism on Tx
	bpf: Disable preemption when increasing per-cpu map_locked
	bpf: Propagate error from htab_lock_bucket() to userspace
	bpf: Use this_cpu_{inc|dec|inc_return} for bpf_task_storage_busy
	Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend
	wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()
	wifi: rtw88: add missing destroy_workqueue() on error path in rtw_core_init()
	selftests/xsk: Avoid use-after-free on ctx
	spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()
	spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()
	wifi: rtl8xxxu: Fix skb misuse in TX queue selection
	spi: meson-spicc: do not rely on busy flag in pow2 clk ops
	bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
	wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration
	wifi: rtl8xxxu: Remove copy-paste leftover in gen2_update_rate_mask
	wifi: mt76: sdio: fix transmitting packet hangs
	wifi: mt76: mt7615: add mt7615_mutex_acquire/release in mt7615_sta_set_decap_offload
	wifi: mt76: mt7915: do not check state before configuring implicit beamform
	Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
	net: fs_enet: Fix wrong check in do_pd_setup
	bpf: Ensure correct locking around vulnerable function find_vpid()
	Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
	netfilter: conntrack: fix the gc rescheduling delay
	netfilter: conntrack: revisit the gc initial rescheduling bias
	wifi: ath11k: fix number of VHT beamformee spatial streams
	x86/microcode/AMD: Track patch allocation size explicitly
	x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
	spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
	spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
	skmsg: Schedule psock work if the cached skb exists on the psock
	i2c: mlxbf: support lock mechanism
	Bluetooth: hci_core: Fix not handling link timeouts propertly
	xfrm: Reinject transport-mode packets through workqueue
	netfilter: nft_fib: Fix for rpath check with VRF devices
	spi: s3c64xx: Fix large transfers with DMA
	wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
	vhost/vsock: Use kvmalloc/kvfree for larger packets.
	eth: alx: take rtnl_lock on resume
	mISDN: fix use-after-free bugs in l1oip timer handlers
	sctp: handle the error returned from sctp_auth_asoc_init_active_key
	tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited
	spi: Ensure that sg_table won't be used after being freed
	hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
	net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()
	bnx2x: fix potential memory leak in bnx2x_tpa_stop()
	net: wwan: iosm: Call mutex_init before locking it
	net/ieee802154: reject zero-sized raw_sendmsg()
	once: add DO_ONCE_SLOW() for sleepable contexts
	net: mvpp2: fix mvpp2 debugfs leak
	drm: bridge: adv7511: fix CEC power down control register offset
	drm: bridge: adv7511: unregister cec i2c device after cec adapter
	drm/bridge: Avoid uninitialized variable warning
	drm/mipi-dsi: Detach devices when removing the host
	drm/virtio: Correct drm_gem_shmem_get_sg_table() error handling
	drm/bridge: parade-ps8640: Fix regulator supply order
	drm/dp_mst: fix drm_dp_dpcd_read return value checks
	drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()
	ASoC: mt6359: fix tests for platform_get_irq() failure
	platform/chrome: fix double-free in chromeos_laptop_prepare()
	platform/chrome: fix memory corruption in ioctl
	ASoC: tas2764: Allow mono streams
	ASoC: tas2764: Drop conflicting set_bias_level power setting
	ASoC: tas2764: Fix mute/unmute
	platform/x86: msi-laptop: Fix old-ec check for backlight registering
	platform/x86: msi-laptop: Fix resource cleanup
	platform/chrome: cros_ec_typec: Correct alt mode index
	drm/amdgpu: add missing pci_disable_device() in amdgpu_pmops_runtime_resume()
	drm/bridge: megachips: Fix a null pointer dereference bug
	ASoC: rsnd: Add check for rsnd_mod_power_on
	ALSA: hda: beep: Simplify keep-power-at-enable behavior
	drm/bochs: fix blanking
	drm/omap: dss: Fix refcount leak bugs
	drm/amdgpu: Fix memory leak in hpd_rx_irq_create_workqueue()
	mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
	ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
	drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx
	drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()
	drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl()
	ASoC: codecs: tx-macro: fix kcontrol put
	ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
	ALSA: dmaengine: increment buffer pointer atomically
	mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
	ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
	ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
	ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
	ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
	ALSA: hda/hdmi: Don't skip notification handling during PM operation
	memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe()
	memory: of: Fix refcount leak bug in of_get_ddr_timings()
	memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
	locks: fix TOCTOU race when granting write lease
	soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
	soc: qcom: smem_state: Add refcounting for the 'state->of_node'
	ARM: dts: imx6qdl-kontron-samx6i: hook up DDC i2c bus
	ARM: dts: turris-omnia: Fix mpp26 pin name and comment
	ARM: dts: kirkwood: lsxl: fix serial line
	ARM: dts: kirkwood: lsxl: remove first ethernet port
	ia64: export memory_add_physaddr_to_nid to fix cxl build error
	soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
	arm64: dts: ti: k3-j7200: fix main pinmux range
	ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family
	ARM: Drop CMDLINE_* dependency on ATAGS
	ext4: don't run ext4lazyinit for read-only filesystems
	arm64: ftrace: fix module PLTs with mcount
	ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
	iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
	iio: adc: at91-sama5d2_adc: check return status for pressure and touch
	iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
	iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
	iio: inkern: only release the device node when done with it
	iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
	iio: ABI: Fix wrong format of differential capacitance channel ABI.
	iio: magnetometer: yas530: Change data type of hard_offsets to signed
	RDMA/mlx5: Don't compare mkey tags in DEVX indirect mkey
	usb: common: debug: Check non-standard control requests
	clk: meson: Hold reference returned by of_get_parent()
	clk: oxnas: Hold reference returned by of_get_parent()
	clk: qoriq: Hold reference returned by of_get_parent()
	clk: berlin: Add of_node_put() for of_get_parent()
	clk: sprd: Hold reference returned by of_get_parent()
	clk: tegra: Fix refcount leak in tegra210_clock_init
	clk: tegra: Fix refcount leak in tegra114_clock_init
	clk: tegra20: Fix refcount leak in tegra20_clock_init
	HSI: omap_ssi: Fix refcount leak in ssi_probe
	HSI: omap_ssi_port: Fix dma_map_sg error check
	media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
	tty: xilinx_uartps: Fix the ignore_status
	media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
	media: uvcvideo: Fix memory leak in uvc_gpio_parse
	media: uvcvideo: Use entity get_cur in uvc_ctrl_set
	media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
	RDMA/rxe: Fix "kernel NULL pointer dereference" error
	RDMA/rxe: Fix the error caused by qp->sk
	misc: ocxl: fix possible refcount leak in afu_ioctl()
	fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
	dmaengine: hisilicon: Disable channels when unregister hisi_dma
	dmaengine: hisilicon: Fix CQ head update
	dmaengine: hisilicon: Add multi-thread support for a DMA channel
	dyndbg: fix static_branch manipulation
	dyndbg: fix module.dyndbg handling
	dyndbg: let query-modname override actual module name
	dyndbg: drop EXPORTed dynamic_debug_exec_queries
	clk: qcom: sm6115: Select QCOM_GDSC
	mtd: devices: docg3: check the return value of devm_ioremap() in the probe
	phy: amlogic: phy-meson-axg-mipi-pcie-analog: Hold reference returned by of_get_parent()
	phy: phy-mtk-tphy: fix the phy type setting issue
	mtd: rawnand: intel: Read the chip-select line from the correct OF node
	mtd: rawnand: intel: Remove undocumented compatible string
	mtd: rawnand: fsl_elbc: Fix none ECC mode
	RDMA/irdma: Align AE id codes to correct flush code and event
	RDMA/srp: Fix srp_abort()
	RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.
	RDMA/siw: Fix QP destroy to wait for all references dropped.
	ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
	ata: fix ata_id_has_devslp()
	ata: fix ata_id_has_ncq_autosense()
	ata: fix ata_id_has_dipm()
	mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
	md: Replace snprintf with scnprintf
	md/raid5: Ensure stripe_fill happens on non-read IO with journal
	md/raid5: Remove unnecessary bio_put() in raid5_read_one_chunk()
	RDMA/cm: Use SLID in the work completion as the DLID in responder side
	IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers
	xhci: Don't show warning for reinit on known broken suspend
	usb: gadget: function: fix dangling pnp_string in f_printer.c
	drivers: serial: jsm: fix some leaks in probe
	serial: 8250: Toggle IER bits on only after irq has been set up
	tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
	phy: qualcomm: call clk_disable_unprepare in the error handling
	staging: vt6655: fix some erroneous memory clean-up loops
	slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMON
	firmware: google: Test spinlock on panic path to avoid lockups
	serial: 8250: Fix restoring termios speed after suspend
	scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()
	scsi: iscsi: Rename iscsi_conn_queue_work()
	scsi: iscsi: Add recv workqueue helpers
	scsi: iscsi: Run recv path from workqueue
	scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
	clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical
	clk: qcom: gcc-sm6115: Override default Alpha PLL regs
	RDMA/rxe: Fix resize_finish() in rxe_queue.c
	fsi: core: Check error number after calling ida_simple_get
	mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe()
	mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq()
	mfd: lp8788: Fix an error handling path in lp8788_probe()
	mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init()
	mfd: fsl-imx25: Fix check for platform_get_irq() errors
	mfd: sm501: Add check for platform_driver_register()
	clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
	dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
	usb: mtu3: fix failed runtime suspend in host only mode
	spmi: pmic-arb: correct duplicate APID to PPID mapping logic
	clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD
	clk: baikal-t1: Fix invalid xGMAC PTP clock divider
	clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
	clk: baikal-t1: Add SATA internal ref clock buffer
	clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
	clk: imx: scu: fix memleak on platform_device_add() fails
	clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
	clk: ast2600: BCLK comes from EPLL
	mailbox: mpfs: fix handling of the reg property
	mailbox: mpfs: account for mbox offsets while sending
	mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
	powerpc/configs: Properly enable PAPR_SCM in pseries_defconfig
	powerpc/math_emu/efp: Include module.h
	powerpc/sysdev/fsl_msi: Add missing of_node_put()
	powerpc/pci_dn: Add missing of_node_put()
	powerpc/powernv: add missing of_node_put() in opal_export_attrs()
	powerpc: Fix fallocate and fadvise64_64 compat parameter combination
	x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition
	powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5
	powerpc: Fix SPE Power ISA properties for e500v1 platforms
	powerpc/kprobes: Fix null pointer reference in arch_prepare_kprobe()
	powerpc/pseries/vas: Pass hw_cpu_id to node associativity HCALL
	crypto: sahara - don't sleep when in softirq
	crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr
	hwrng: arm-smccc-trng - fix NO_ENTROPY handling
	cgroup: Honor caller's cgroup NS when resolving path
	hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()
	crypto: qat - fix default value of WDT timer
	crypto: hisilicon/qm - fix missing put dfx access
	cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
	iommu/omap: Fix buffer overflow in debugfs
	crypto: akcipher - default implementation for setting a private key
	crypto: ccp - Release dma channels before dmaengine unrgister
	crypto: inside-secure - Change swab to swab32
	crypto: qat - fix DMA transfer direction
	cifs: return correct error in ->calc_signature()
	iommu/iova: Fix module config properly
	tracing: kprobe: Fix kprobe event gen test module on exit
	tracing: kprobe: Make gen test module work in arm and riscv
	tracing/osnoise: Fix possible recursive locking in stop_per_cpu_kthreads
	kbuild: remove the target in signal traps when interrupted
	kbuild: rpm-pkg: fix breakage when V=1 is used
	crypto: marvell/octeontx - prevent integer overflows
	crypto: cavium - prevent integer overflow loading firmware
	thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
	ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
	f2fs: fix race condition on setting FI_NO_EXTENT flag
	f2fs: fix to account FS_CP_DATA_IO correctly
	selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
	fs: dlm: fix race in lowcomms
	rcu: Avoid triggering strict-GP irq-work when RCU is idle
	rcu: Back off upon fill_page_cache_func() allocation failure
	rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
	ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
	ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
	cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
	MIPS: BCM47XX: Cast memcmp() of function to (void *)
	powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
	thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
	ARM: decompressor: Include .data.rel.ro.local
	ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable
	x86/entry: Work around Clang __bdos() bug
	NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data
	NFSD: fix use-after-free on source server when doing inter-server copy
	wifi: brcmfmac: fix invalid address access when enabling SCAN log level
	bpftool: Clear errno after libcap's checks
	ice: set tx_tstamps when creating new Tx rings via ethtool
	net: ethernet: ti: davinci_mdio: Add workaround for errata i2329
	openvswitch: Fix double reporting of drops in dropwatch
	openvswitch: Fix overreporting of drops in dropwatch
	tcp: annotate data-race around tcp_md5sig_pool_populated
	x86/mce: Retrieve poison range from hardware
	wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()
	thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround
	xfrm: Update ipcomp_scratches with NULL when freed
	iavf: Fix race between iavf_close and iavf_reset_task
	wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
	Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
	regulator: core: Prevent integer underflow
	wifi: mt76: mt7921: reset msta->airtime_ac while clearing up hw value
	Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
	Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
	can: bcm: check the result of can_send() in bcm_can_tx()
	wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
	wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
	wifi: rt2x00: set VGC gain for both chains of MT7620
	wifi: rt2x00: set SoC wmac clock register
	wifi: rt2x00: correctly set BBP register 86 for MT7620
	hwmon: (sht4x) do not overflow clamping operation on 32-bit platforms
	net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
	Bluetooth: L2CAP: Fix user-after-free
	r8152: Rate limit overflow messages
	drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()
	drm: Use size_t type for len variable in drm_copy_field()
	drm: Prevent drm_copy_field() to attempt copying a NULL pointer
	drm/komeda: Fix handling of atomic commits in the atomic_commit_tail hook
	gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()
	drm/amd/display: fix overflow on MIN_I64 definition
	udmabuf: Set ubuf->sg = NULL if the creation of sg table fails
	drm: bridge: dw_hdmi: only trigger hotplug event on link change
	ALSA: usb-audio: Register card at the last interface
	drm/vc4: vec: Fix timings for VEC modes
	drm: panel-orientation-quirks: Add quirk for Anbernic Win600
	platform/chrome: cros_ec: Notify the PM of wake events during resume
	platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
	ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
	drm/amdgpu: fix initial connector audio value
	drm/meson: reorder driver deinit sequence to fix use-after-free bug
	drm/meson: explicitly remove aggregate driver at module unload time
	mmc: sdhci-msm: add compatible string check for sdm670
	drm/dp: Don't rewrite link config when setting phy test pattern
	drm/amd/display: Remove interface for periodic interrupt 1
	ARM: dts: imx7d-sdb: config the max pressure for tsc2046
	ARM: dts: imx6q: add missing properties for sram
	ARM: dts: imx6dl: add missing properties for sram
	ARM: dts: imx6qp: add missing properties for sram
	ARM: dts: imx6sl: add missing properties for sram
	ARM: dts: imx6sll: add missing properties for sram
	ARM: dts: imx6sx: add missing properties for sram
	kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
	arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
	btrfs: dump extra info if one free space cache has more bitmaps than it should
	btrfs: scrub: try to fix super block errors
	btrfs: don't print information about space cache or tree every remount
	ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n
	clk: zynqmp: Fix stack-out-of-bounds in strncpy`
	media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
	media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc
	clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
	usb: host: xhci-plat: suspend and resume clocks
	usb: host: xhci-plat: suspend/resume clks for brcm
	dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
	scsi: 3w-9xxx: Avoid disabling device if failing to enable it
	nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
	iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
	power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
	staging: vt6655: fix potential memory leak
	blk-throttle: prevent overflow while calculating wait time
	ata: libahci_platform: Sanity check the DT child nodes number
	bcache: fix set_at_max_writeback_rate() for multiple attached devices
	soundwire: cadence: Don't overwrite msg->buf during write commands
	soundwire: intel: fix error handling on dai registration issues
	HID: roccat: Fix use-after-free in roccat_read()
	eventfd: guard wake_up in eventfd fs calls as well
	md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
	usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
	usb: musb: Fix musb_gadget.c rxstate overflow bug
	arm64: dts: imx8mp: Add snps,gfladj-refclk-lpm-sel quirk to USB nodes
	usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug
	Revert "usb: storage: Add quirk for Samsung Fit flash"
	staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()
	staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()
	scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled
	ext2: Use kvmalloc() for group descriptor array
	nvme: copy firmware_rev on each init
	nvmet-tcp: add bounds check on Transfer Tag
	usb: idmouse: fix an uninit-value in idmouse_open
	clk: bcm2835: Make peripheral PLLC critical
	clk: bcm2835: Round UART input clock up
	perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
	io_uring/af_unix: defer registered files gc to io_uring release
	io_uring: correct pinned_vm accounting
	io_uring/rw: fix short rw error handling
	io_uring/rw: fix error'ed retry return values
	io_uring/rw: fix unexpected link breakage
	mm: hugetlb: fix UAF in hugetlb_handle_userfault
	net: ieee802154: return -EINVAL for unknown addr type
	ALSA: usb-audio: Fix last interface check for registration
	blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
	net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses
	Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
	net/ieee802154: don't warn zero-sized raw_sendmsg()
	drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n
	Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
	Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
	lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
	ext4: continue to expand file system when the target size doesn't reach
	thermal: intel_powerclamp: Use first online CPU as control_cpu
	gcov: support GCC 12.1 and newer compilers
	io-wq: Fix memory leak in worker creation
	Linux 5.15.75

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id3dfe8285e830d01df7adb33729e78a75c1cac1a

Documentation/ABI/testing/sysfs-bus-iio

@@ -188,7 +188,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/arm64/silicon-errata.rst

@@ -68,6 +68,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #2441007        | ARM64_ERRATUM_2441007       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #852523         | N/A                         |

Documentation/filesystems/vfs.rst

@@ -274,6 +274,9 @@ or bottom half).
 	This is specifically for the inode itself being marked dirty,
 	not its data.  If the update needs to be persisted by fdatasync(),
 	then I_DIRTY_DATASYNC will be set in the flags argument.
+	I_DIRTY_TIME will be set in the flags in case lazytime is enabled
+	and struct inode has times updated since the last ->dirty_inode
+	call.
 
 ``write_inode``
 	this method is called when the VFS needs to write an inode to

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 74
+SUBLEVEL = 75
 EXTRAVERSION =
 NAME = Trick or Treat
 
@@ -866,12 +866,12 @@ endif
 
 # Initialize all stack variables with a zero value.
 ifdef CONFIG_INIT_STACK_ALL_ZERO
-# Future support for zero initialization is still being debated, see
-# https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being
-# renamed or dropped.
 KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
+ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+# https://github.com/llvm/llvm-project/issues/44842
 KBUILD_CFLAGS	+= -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 endif
+endif
 
 # While VLAs have been removed, GCC produces unreachable stack probes
 # for the randomize_kstack_offset feature. Disable it for all compilers.

arch/arm/Kconfig

@@ -1742,7 +1742,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"

arch/arm/boot/compressed/vmlinux.lds.S

@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)

arch/arm/boot/dts/armada-385-turris-omnia.dts

@@ -471,7 +471,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -506,7 +506,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {

arch/arm/boot/dts/exynos4412-midas.dtsi

@@ -585,7 +585,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {

arch/arm/boot/dts/exynos4412-origen.dts

@@ -95,7 +95,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";

arch/arm/boot/dts/imx6dl.dtsi

@@ -84,6 +84,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6q.dtsi

@@ -163,6 +163,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi

@@ -263,6 +263,10 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+};
+
 &i2c_intern {
 	pmic@8 {
 		compatible = "fsl,pfuze100";
@@ -387,7 +391,7 @@
 
 /* HDMI_CTRL */
 &i2c2 {
-	clock-frequency = <375000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 };

arch/arm/boot/dts/imx6qp.dtsi

@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6sl.dtsi

@@ -117,6 +117,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6sll.dtsi

@@ -117,6 +117,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {

arch/arm/boot/dts/imx6sx.dtsi

@@ -164,12 +164,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -206,12 +206,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
+		touchscreen-max-pressure = <255>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {

arch/arm/mm/dump.c

@@ -346,7 +346,7 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 		addr = start + i * PMD_SIZE;
 		domain = get_domain_name(pmd);
 		if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd))
-			note_page(st, addr, 3, pmd_val(*pmd), domain);
+			note_page(st, addr, 4, pmd_val(*pmd), domain);
 		else
 			walk_pte(st, pmd, addr, domain);
 

arch/arm/mm/kasan_init.c

@@ -264,12 +264,17 @@ void __init kasan_init(void)
 
 	/*
 	 * 1. The module global variables are in MODULES_VADDR ~ MODULES_END,
-	 *    so we need to map this area.
+	 *    so we need to map this area if CONFIG_KASAN_VMALLOC=n. With
+	 *    VMALLOC support KASAN will manage this region dynamically,
+	 *    refer to kasan_populate_vmalloc() and ARM's implementation of
+	 *    module_alloc().
 	 * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
 	 *    ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't
 	 *    use kasan_populate_zero_shadow.
 	 */
-	create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE));
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES))
+		create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END));
+	create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE));
 
 	/*
 	 * KAsan may reuse the contents of kasan_early_shadow_pte directly, so

arch/arm/mm/mmu.c

@@ -300,7 +300,11 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 			     L_PTE_XN | L_PTE_RDONLY,
 		.prot_l1   = PMD_TYPE_TABLE,
+#ifdef CONFIG_ARM_LPAE
+		.prot_sect = PMD_TYPE_SECT | L_PMD_SECT_RDONLY | PMD_SECT_AP2,
+#else
 		.prot_sect = PMD_TYPE_SECT,
+#endif
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_ROM] = {

arch/arm64/Kconfig

@@ -603,6 +603,23 @@ config ARM64_ERRATUM_1530923
 config ARM64_WORKAROUND_REPEAT_TLBI
 	bool
 
+config ARM64_ERRATUM_2441007
+	bool "Cortex-A55: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A55 erratum #2441007.
+
+	  Under very rare circumstances, affected Cortex-A55 CPUs
+	  may not handle a race between a break-before-make sequence on one
+	  CPU, and another CPU accessing the same page. This could allow a
+	  store to a page that has been unmapped.
+
+	  Work around this by adding the affected CPUs to the list that needs
+	  TLB sequences to be done twice.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_1286807
 	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
 	default y

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -912,7 +912,7 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
 			};
 
 		};
@@ -953,7 +953,7 @@
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
 			};
 		};
 

arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

@@ -967,6 +967,7 @@
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
 		maxim,over-heat-temp = <700>;
 		maxim,over-volt = <4500>;
 		maxim,rsns-microohm = <5000>;

arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts

@@ -131,12 +131,6 @@
 		>;
 	};
 
-	main_usbss0_pins_default: main-usbss0-pins-default {
-		pinctrl-single,pins = <
-			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
-		>;
-	};
-
 	vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
@@ -144,6 +138,14 @@
 	};
 };
 
+&main_pmx1 {
+	main_usbss0_pins_default: main-usbss0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+		>;
+	};
+};
+
 &wkup_uart0 {
 	/* Wakeup UART is used by System firmware */
 	status = "reserved";

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi

@@ -295,7 +295,16 @@
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x11c000 0x00 0x2b4>;
+		reg = <0x00 0x11c000 0x00 0x10c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c11c {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c11c 0x00 0xc>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;

arch/arm64/kernel/cpu_errata.c

@@ -214,6 +214,11 @@ static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
 		ERRATA_MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xe),
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_2441007
+	{
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+	},
+#endif
 #ifdef CONFIG_ARM64_ERRATUM_2441009
 	{
 		/* Cortex-A510 r0p0 -> r1p1. Fixed in r1p2 */

arch/arm64/kernel/ftrace.c

@@ -217,11 +217,26 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 	unsigned long pc = rec->ip;
 	u32 old = 0, new;
 
+	new = aarch64_insn_gen_nop();
+
+	/*
+	 * When using mcount, callsites in modules may have been initalized to
+	 * call an arbitrary module PLT (which redirects to the _mcount stub)
+	 * rather than the ftrace PLT we'll use at runtime (which redirects to
+	 * the ftrace trampoline). We can ignore the old PLT when initializing
+	 * the callsite.
+	 *
+	 * Note: 'mod' is only set at module load time.
+	 */
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS) &&
+	    IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) && mod) {
+		return aarch64_insn_patch_text_nosync((void *)pc, new);
+	}
+
 	if (!ftrace_find_callable_addr(rec, mod, &addr))
 		return -EINVAL;
 
 	old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
-	new = aarch64_insn_gen_nop();
 
 	return ftrace_modify_code(pc, old, new, true);
 }

arch/arm64/kernel/topology.c

@@ -22,46 +22,6 @@
 #include <asm/cputype.h>
 #include <asm/topology.h>
 
-void store_cpu_topology(unsigned int cpuid)
-{
-	struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
-	u64 mpidr;
-
-	if (cpuid_topo->package_id != -1)
-		goto topology_populated;
-
-	mpidr = read_cpuid_mpidr();
-
-	/* Uniprocessor systems can rely on default topology values */
-	if (mpidr & MPIDR_UP_BITMASK)
-		return;
-
-	/*
-	 * This would be the place to create cpu topology based on MPIDR.
-	 *
-	 * However, it cannot be trusted to depict the actual topology; some
-	 * pieces of the architecture enforce an artificial cap on Aff0 values
-	 * (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an
-	 * artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up
-	 * having absolutely no relationship to the actual underlying system
-	 * topology, and cannot be reasonably used as core / package ID.
-	 *
-	 * If the MT bit is set, Aff0 *could* be used to define a thread ID, but
-	 * we still wouldn't be able to obtain a sane core ID. This means we
-	 * need to entirely ignore MPIDR for any topology deduction.
-	 */
-	cpuid_topo->thread_id  = -1;
-	cpuid_topo->core_id    = cpuid;
-	cpuid_topo->package_id = cpu_to_node(cpuid);
-
-	pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
-		 cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
-		 cpuid_topo->thread_id, mpidr);
-
-topology_populated:
-	update_siblings_masks(cpuid);
-}
-
 #ifdef CONFIG_ACPI
 static bool __init acpi_cpu_is_threaded(int cpu)
 {

arch/ia64/mm/numa.c

@@ -75,5 +75,6 @@ int memory_add_physaddr_to_nid(u64 addr)
 		return 0;
 	return nid;
 }
+EXPORT_SYMBOL(memory_add_physaddr_to_nid);
 #endif
 #endif

arch/mips/bcm47xx/prom.c

@@ -86,7 +86,7 @@ static __init void prom_init_mem(void)
 			pr_debug("Assume 128MB RAM\n");
 			break;
 		}
-		if (!memcmp(prom_init, prom_init + mem, 32))
+		if (!memcmp((void *)prom_init, (void *)prom_init + mem, 32))
 			break;
 	}
 	lowmem = mem;
@@ -159,7 +159,7 @@ void __init bcm47xx_prom_highmem_init(void)
 
 	off = EXTVBASE + __pa(off);
 	for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
-		if (!memcmp(prom_init, (void *)(off + extmem), 16))
+		if (!memcmp((void *)prom_init, (void *)(off + extmem), 16))
 			break;
 	}
 	extmem -= lowmem;

arch/mips/sgi-ip27/ip27-xtalk.c

@@ -27,15 +27,18 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
 {
 	struct xtalk_bridge_platform_data *bd;
 	struct sgi_w1_platform_data *wd;
-	struct platform_device *pdev;
+	struct platform_device *pdev_wd;
+	struct platform_device *pdev_bd;
 	struct resource w1_res;
 	unsigned long offset;
 
 	offset = NODE_OFFSET(nasid);
 
 	wd = kzalloc(sizeof(*wd), GFP_KERNEL);
-	if (!wd)
+	if (!wd) {
-		goto no_mem;
+		pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
+		return;
+	}
 
 	snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx",
 		 offset + (widget << SWIN_SIZE_BITS));
@@ -46,22 +49,35 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
 	w1_res.end = w1_res.start + 3;
 	w1_res.flags = IORESOURCE_MEM;
 
-	pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
+	pdev_wd = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
-	if (!pdev) {
+	if (!pdev_wd) {
-		kfree(wd);
+		pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
-		goto no_mem;
+		goto err_kfree_wd;
 	}
-	platform_device_add_resources(pdev, &w1_res, 1);
+	if (platform_device_add_resources(pdev_wd, &w1_res, 1)) {
-	platform_device_add_data(pdev, wd, sizeof(*wd));
+		pr_warn("xtalk:n%d/%x bridge failed to add platform resources.\n", nasid, widget);
-	platform_device_add(pdev);
+		goto err_put_pdev_wd;
+	}
+	if (platform_device_add_data(pdev_wd, wd, sizeof(*wd))) {
+		pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget);
+		goto err_put_pdev_wd;
+	}
+	if (platform_device_add(pdev_wd)) {
+		pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget);
+		goto err_put_pdev_wd;
+	}
+	/* platform_device_add_data() duplicates the data */
+	kfree(wd);
 
 	bd = kzalloc(sizeof(*bd), GFP_KERNEL);
-	if (!bd)
+	if (!bd) {
-		goto no_mem;
+		pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
-	pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
+		goto err_unregister_pdev_wd;
-	if (!pdev) {
+	}
-		kfree(bd);
+	pdev_bd = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
-		goto no_mem;
+	if (!pdev_bd) {
+		pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
+		goto err_kfree_bd;
 	}
 
 
@@ -82,13 +98,31 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
 	bd->io.flags	= IORESOURCE_IO;
 	bd->io_offset	= offset;
 
-	platform_device_add_data(pdev, bd, sizeof(*bd));
+	if (platform_device_add_data(pdev_bd, bd, sizeof(*bd))) {
-	platform_device_add(pdev);
+		pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget);
+		goto err_put_pdev_bd;
+	}
+	if (platform_device_add(pdev_bd)) {
+		pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget);
+		goto err_put_pdev_bd;
+	}
+	/* platform_device_add_data() duplicates the data */
+	kfree(bd);
 	pr_info("xtalk:n%d/%x bridge widget\n", nasid, widget);
 	return;
 
-no_mem:
+err_put_pdev_bd:
-	pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
+	platform_device_put(pdev_bd);
+err_kfree_bd:
+	kfree(bd);
+err_unregister_pdev_wd:
+	platform_device_unregister(pdev_wd);
+	return;
+err_put_pdev_wd:
+	platform_device_put(pdev_wd);
+err_kfree_wd:
+	kfree(wd);
+	return;
 }
 
 static int probe_one_port(nasid_t nasid, int widget, int masterwid)

arch/powerpc/Makefile

@@ -154,7 +154,7 @@ CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power8
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power9,-mtune=power8)
 else
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
-CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
+CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power4
 endif
 else ifdef CONFIG_PPC_BOOK3E_64
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64

arch/powerpc/boot/Makefile

@@ -34,6 +34,7 @@ endif
 
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \
+		 $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \
 		 -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
 		 $(LINUXINCLUDE)
 

arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi

@@ -0,0 +1,51 @@
+/*
+ * e500v1 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};

arch/powerpc/boot/dts/fsl/mpc8540ads.dts

@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8540ADS";

arch/powerpc/boot/dts/fsl/mpc8541cds.dts

@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8541CDS";

arch/powerpc/boot/dts/fsl/mpc8555cds.dts

@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8555CDS";

arch/powerpc/boot/dts/fsl/mpc8560ads.dts

@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8560ADS";

arch/powerpc/configs/pseries_defconfig

@@ -41,6 +41,7 @@ CONFIG_DTL=y
 CONFIG_SCANLOG=m
 CONFIG_PPC_SMLPAR=y
 CONFIG_IBMEBUS=y
+CONFIG_LIBNVDIMM=m
 CONFIG_PAPR_SCM=m
 CONFIG_PPC_SVM=y
 # CONFIG_PPC_PMAC is not set

arch/powerpc/include/asm/syscalls.h

@@ -8,6 +8,18 @@
 #include <linux/types.h>
 #include <linux/compat.h>
 
+/*
+ * long long munging:
+ * The 32 bit ABI passes long longs in an odd even register pair.
+ * High and low parts are swapped depending on endian mode,
+ * so define a macro (similar to mips linux32) to handle that.
+ */
+#ifdef __LITTLE_ENDIAN__
+#define merge_64(low, high) (((u64)high << 32) | low)
+#else
+#define merge_64(high, low) (((u64)high << 32) | low)
+#endif
+
 struct rtas_args;
 
 asmlinkage long sys_mmap(unsigned long addr, size_t len,

arch/powerpc/kernel/kprobes.c

@@ -140,7 +140,13 @@ int arch_prepare_kprobe(struct kprobe *p)
 	preempt_disable();
 	prev = get_kprobe(p->addr - 1);
 	preempt_enable_no_resched();
-	if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
+
+	/*
+	 * When prev is a ftrace-based kprobe, we don't have an insn, and it
+	 * doesn't probe for prefixed instruction.
+	 */
+	if (prev && !kprobe_ftrace(prev) &&
+	    ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
 		printk("Cannot register a kprobe on the second word of prefixed instruction\n");
 		ret = -EINVAL;
 	}

arch/powerpc/kernel/pci_dn.c

@@ -330,6 +330,7 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 	INIT_LIST_HEAD(&pdn->list);
 	parent = of_get_parent(dn);
 	pdn->parent = parent ? PCI_DN(parent) : NULL;
+	of_node_put(parent);
 	if (pdn->parent)
 		list_add_tail(&pdn->list, &pdn->parent->child_list);
 

arch/powerpc/kernel/sys_ppc32.c

@@ -56,18 +56,6 @@ unsigned long compat_sys_mmap2(unsigned long addr, size_t len,
 	return sys_mmap(addr, len, prot, flags, fd, pgoff << 12);
 }
 
-/* 
- * long long munging:
- * The 32 bit ABI passes long longs in an odd even register pair.
- * High and low parts are swapped depending on endian mode,
- * so define a macro (similar to mips linux32) to handle that.
- */
-#ifdef __LITTLE_ENDIAN__
-#define merge_64(low, high) ((u64)high << 32) | low
-#else
-#define merge_64(high, low) ((u64)high << 32) | low
-#endif
-
 compat_ssize_t compat_sys_pread64(unsigned int fd, char __user *ubuf, compat_size_t count,
 			     u32 reg6, u32 pos1, u32 pos2)
 {
@@ -94,7 +82,7 @@ asmlinkage int compat_sys_truncate64(const char __user * path, u32 reg4,
 asmlinkage long compat_sys_fallocate(int fd, int mode, u32 offset1, u32 offset2,
 				     u32 len1, u32 len2)
 {
-	return ksys_fallocate(fd, mode, ((loff_t)offset1 << 32) | offset2,
+	return ksys_fallocate(fd, mode, merge_64(offset1, offset2),
 			     merge_64(len1, len2));
 }
 

arch/powerpc/kernel/syscalls.c

@@ -99,8 +99,8 @@ long ppc64_personality(unsigned long personality)
 long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
 		      u32 len_high, u32 len_low)
 {
-	return ksys_fadvise64_64(fd, (u64)offset_high << 32 | offset_low,
+	return ksys_fadvise64_64(fd, merge_64(offset_high, offset_low),
-				 (u64)len_high << 32 | len_low, advice);
+				 merge_64(len_high, len_low), advice);
 }
 
 SYSCALL_DEFINE0(switch_endian)

arch/powerpc/math-emu/math_efp.c

@@ -17,6 +17,7 @@
 
 #include <linux/types.h>
 #include <linux/prctl.h>
+#include <linux/module.h>
 
 #include <linux/uaccess.h>
 #include <asm/reg.h>

arch/powerpc/platforms/powernv/opal.c

@@ -892,6 +892,7 @@ static void opal_export_attrs(void)
 	kobj = kobject_create_and_add("exports", opal_kobj);
 	if (!kobj) {
 		pr_warn("kobject_create_and_add() of exports failed\n");
+		of_node_put(np);
 		return;
 	}
 

arch/powerpc/platforms/pseries/vas.c

@@ -324,7 +324,7 @@ static struct vas_window *vas_allocate_window(int vas_id, u64 flags,
 		 * So no unpacking needs to be done.
 		 */
 		rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, domain,
-				  VPHN_FLAG_VCPU, smp_processor_id());
+				  VPHN_FLAG_VCPU, hard_smp_processor_id());
 		if (rc != H_SUCCESS) {
 			pr_err("H_HOME_NODE_ASSOCIATIVITY error: %d\n", rc);
 			goto out;

arch/powerpc/sysdev/fsl_msi.c

@@ -211,8 +211,10 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 			dev_err(&pdev->dev,
 				"node %pOF has an invalid fsl,msi phandle %u\n",
 				hose->dn, np->phandle);
+			of_node_put(np);
 			return -EINVAL;
 		}
+		of_node_put(np);
 	}
 
 	for_each_pci_msi_entry(entry, pdev) {

arch/riscv/Kconfig

@@ -46,7 +46,7 @@ config RISCV
 	select CLINT_TIMER if !MMU
 	select COMMON_CLK
 	select EDAC_SUPPORT
-	select GENERIC_ARCH_TOPOLOGY if SMP
+	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_EARLY_IOREMAP

arch/riscv/Makefile

@@ -39,6 +39,7 @@ else
 endif
 
 ifeq ($(CONFIG_LD_IS_LLD),y)
+ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 150000; echo $$?),0)
 	KBUILD_CFLAGS += -mno-relax
 	KBUILD_AFLAGS += -mno-relax
 ifndef CONFIG_AS_IS_LLVM
@@ -46,6 +47,7 @@ ifndef CONFIG_AS_IS_LLVM
 	KBUILD_AFLAGS += -Wa,-mno-relax
 endif
 endif
+endif
 
 # ISA string setting
 riscv-march-$(CONFIG_ARCH_RV32I)	:= rv32ima

arch/riscv/include/asm/io.h

@@ -101,9 +101,9 @@ __io_reads_ins(reads, u32, l, __io_br(), __io_ar(addr))
 __io_reads_ins(ins,  u8, b, __io_pbr(), __io_par(addr))
 __io_reads_ins(ins, u16, w, __io_pbr(), __io_par(addr))
 __io_reads_ins(ins, u32, l, __io_pbr(), __io_par(addr))
-#define insb(addr, buffer, count) __insb((void __iomem *)(long)addr, buffer, count)
+#define insb(addr, buffer, count) __insb(PCI_IOBASE + (addr), buffer, count)
-#define insw(addr, buffer, count) __insw((void __iomem *)(long)addr, buffer, count)
+#define insw(addr, buffer, count) __insw(PCI_IOBASE + (addr), buffer, count)
-#define insl(addr, buffer, count) __insl((void __iomem *)(long)addr, buffer, count)
+#define insl(addr, buffer, count) __insl(PCI_IOBASE + (addr), buffer, count)
 
 __io_writes_outs(writes,  u8, b, __io_bw(), __io_aw())
 __io_writes_outs(writes, u16, w, __io_bw(), __io_aw())
@@ -115,22 +115,22 @@ __io_writes_outs(writes, u32, l, __io_bw(), __io_aw())
 __io_writes_outs(outs,  u8, b, __io_pbw(), __io_paw())
 __io_writes_outs(outs, u16, w, __io_pbw(), __io_paw())
 __io_writes_outs(outs, u32, l, __io_pbw(), __io_paw())
-#define outsb(addr, buffer, count) __outsb((void __iomem *)(long)addr, buffer, count)
+#define outsb(addr, buffer, count) __outsb(PCI_IOBASE + (addr), buffer, count)
-#define outsw(addr, buffer, count) __outsw((void __iomem *)(long)addr, buffer, count)
+#define outsw(addr, buffer, count) __outsw(PCI_IOBASE + (addr), buffer, count)
-#define outsl(addr, buffer, count) __outsl((void __iomem *)(long)addr, buffer, count)
+#define outsl(addr, buffer, count) __outsl(PCI_IOBASE + (addr), buffer, count)
 
 #ifdef CONFIG_64BIT
 __io_reads_ins(reads, u64, q, __io_br(), __io_ar(addr))
 #define readsq(addr, buffer, count) __readsq(addr, buffer, count)
 
 __io_reads_ins(ins, u64, q, __io_pbr(), __io_par(addr))
-#define insq(addr, buffer, count) __insq((void __iomem *)addr, buffer, count)
+#define insq(addr, buffer, count) __insq(PCI_IOBASE + (addr), buffer, count)
 
 __io_writes_outs(writes, u64, q, __io_bw(), __io_aw())
 #define writesq(addr, buffer, count) __writesq(addr, buffer, count)
 
 __io_writes_outs(outs, u64, q, __io_pbr(), __io_paw())
-#define outsq(addr, buffer, count) __outsq((void __iomem *)addr, buffer, count)
+#define outsq(addr, buffer, count) __outsq(PCI_IOBASE + (addr), buffer, count)
 #endif
 
 #include <asm-generic/io.h>

arch/riscv/kernel/setup.c

@@ -260,10 +260,10 @@ static void __init parse_dtb(void)
 			pr_info("Machine model: %s\n", name);
 			dump_stack_set_arch_desc("%s (DT)", name);
 		}
-		return;
+	} else {
+		pr_err("No DTB passed to the kernel\n");
 	}
 
-	pr_err("No DTB passed to the kernel\n");
 #ifdef CONFIG_CMDLINE_FORCE
 	strscpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 	pr_info("Forcing kernel command line to: %s\n", boot_command_line);

arch/riscv/kernel/smpboot.c

@@ -53,6 +53,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	unsigned int curr_cpuid;
 
 	curr_cpuid = smp_processor_id();
+	store_cpu_topology(curr_cpuid);
 	numa_store_cpu_info(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
 
@@ -165,9 +166,9 @@ asmlinkage __visible void smp_callin(void)
 	mmgrab(mm);
 	current->active_mm = mm;
 
+	store_cpu_topology(curr_cpuid);
 	notify_cpu_starting(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
-	update_siblings_masks(curr_cpuid);
 	set_cpu_online(curr_cpuid, 1);
 
 	/*

arch/riscv/kernel/sys_riscv.c

@@ -18,9 +18,6 @@ static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 	if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
 		return -EINVAL;
 
-	if (unlikely((prot & PROT_WRITE) && !(prot & PROT_READ)))
-		return -EINVAL;
-
 	return ksys_mmap_pgoff(addr, len, prot, flags, fd,
 			       offset >> (PAGE_SHIFT - page_shift_offset));
 }

arch/riscv/mm/fault.c

@@ -188,7 +188,8 @@ static inline bool access_error(unsigned long cause, struct vm_area_struct *vma)
 		}
 		break;
 	case EXC_LOAD_PAGE_FAULT:
-		if (!(vma->vm_flags & VM_READ)) {
+		/* Write implies read */
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE))) {
 			return true;
 		}
 		break;

arch/sh/include/asm/sections.h

@@ -4,7 +4,7 @@
 
 #include <asm-generic/sections.h>
 
-extern long __machvec_start, __machvec_end;
+extern char __machvec_start[], __machvec_end[];
 extern char __uncached_start, __uncached_end;
 extern char __start_eh_frame[], __stop_eh_frame[];
 

arch/sh/kernel/machvec.c

@@ -20,8 +20,8 @@
 #define MV_NAME_SIZE 32
 
 #define for_each_mv(mv) \
-	for ((mv) = (struct sh_machine_vector *)&__machvec_start; \
+	for ((mv) = (struct sh_machine_vector *)__machvec_start; \
-	     (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \
+	     (mv) && (unsigned long)(mv) < (unsigned long)__machvec_end; \
 	     (mv)++)
 
 static struct sh_machine_vector * __init get_mv_byname(const char *name)
@@ -87,8 +87,8 @@ void __init sh_mv_setup(void)
 	if (!machvec_selected) {
 		unsigned long machvec_size;
 
-		machvec_size = ((unsigned long)&__machvec_end -
+		machvec_size = ((unsigned long)__machvec_end -
-				(unsigned long)&__machvec_start);
+				(unsigned long)__machvec_start);
 
 		/*
 		 * Sanity check for machvec section alignment. Ensure
@@ -102,7 +102,7 @@ void __init sh_mv_setup(void)
 		 * vector (usually the only one) from .machvec.init.
 		 */
 		if (machvec_size >= sizeof(struct sh_machine_vector))
-			sh_mv = *(struct sh_machine_vector *)&__machvec_start;
+			sh_mv = *(struct sh_machine_vector *)__machvec_start;
 	}
 
 	pr_notice("Booting machvec: %s\n", get_system_type());

arch/um/kernel/um_arch.c

@@ -94,7 +94,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+	return *pos < nr_cpu_ids ? cpu_data + *pos : NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)

arch/x86/include/asm/hyperv-tlfs.h

@@ -529,7 +529,7 @@ struct hv_enlightened_vmcs {
 	u64 guest_rip;
 
 	u32 hv_clean_fields;
-	u32 hv_padding_32;
+	u32 padding32_1;
 	u32 hv_synthetic_controls;
 	struct {
 		u32 nested_flush_hypercall:1;
@@ -537,7 +537,7 @@ struct hv_enlightened_vmcs {
 		u32 reserved:30;
 	}  __packed hv_enlightenments_control;
 	u32 hv_vp_id;
-
+	u32 padding32_2;
 	u64 hv_vm_id;
 	u64 partition_assist_page;
 	u64 padding64_4[4];

arch/x86/include/asm/microcode.h

@@ -9,6 +9,7 @@
 struct ucode_patch {
 	struct list_head plist;
 	void *data;		/* Intel uses only this one */
+	unsigned int size;
 	u32 patch_id;
 	u16 equiv_cpu;
 };

arch/x86/kernel/cpu/feat_ctl.c

@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/tboot.h>
 
+#include <asm/cpu.h>
 #include <asm/cpufeature.h>
 #include <asm/msr-index.h>
 #include <asm/processor.h>
 #include <asm/vmx.h>
-#include "cpu.h"
 
 #undef pr_fmt
 #define pr_fmt(fmt)	"x86/cpu: " fmt

arch/x86/kernel/cpu/mce/apei.c

@@ -29,15 +29,26 @@
 void apei_mce_report_mem_error(int severity, struct cper_sec_mem_err *mem_err)
 {
 	struct mce m;
+	int lsb;
 
 	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
 		return;
 
+	/*
+	 * Even if the ->validation_bits are set for address mask,
+	 * to be extra safe, check and reject an error radius '0',
+	 * and fall back to the default page size.
+	 */
+	if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK)
+		lsb = find_first_bit((void *)&mem_err->physical_addr_mask, PAGE_SHIFT);
+	else
+		lsb = PAGE_SHIFT;
+
 	mce_setup(&m);
 	m.bank = -1;
 	/* Fake a memory read error with unknown channel */
 	m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | MCI_STATUS_MISCV | 0x9f;
-	m.misc = (MCI_MISC_ADDR_PHYS << 6) | PAGE_SHIFT;
+	m.misc = (MCI_MISC_ADDR_PHYS << 6) | lsb;
 
 	if (severity >= GHES_SEV_RECOVERABLE)
 		m.status |= MCI_STATUS_UC;

arch/x86/kernel/cpu/microcode/amd.c

@@ -782,6 +782,7 @@ static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover,
 		kfree(patch);
 		return -EINVAL;
 	}
+	patch->size = *patch_size;
 
 	mc_hdr      = (struct microcode_header_amd *)(fw + SECTION_HDR_SIZE);
 	proc_id     = mc_hdr->processor_rev_id;
@@ -863,7 +864,7 @@ load_microcode_amd(bool save, u8 family, const u8 *data, size_t size)
 		return ret;
 
 	memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
-	memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data), PATCH_MAX_SIZE));
+	memcpy(amd_ucode_patch, p->data, min_t(u32, p->size, PATCH_MAX_SIZE));
 
 	return ret;
 }

arch/x86/kernel/cpu/resctrl/pseudo_lock.c

@@ -420,6 +420,7 @@ static int pseudo_lock_fn(void *_rdtgrp)
 	struct pseudo_lock_region *plr = rdtgrp->plr;
 	u32 rmid_p, closid_p;
 	unsigned long i;
+	u64 saved_msr;
 #ifdef CONFIG_KASAN
 	/*
 	 * The registers used for local register variables are also used
@@ -463,6 +464,7 @@ static int pseudo_lock_fn(void *_rdtgrp)
 	 * the buffer and evict pseudo-locked memory read earlier from the
 	 * cache.
 	 */
+	saved_msr = __rdmsr(MSR_MISC_FEATURE_CONTROL);
 	__wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0);
 	closid_p = this_cpu_read(pqr_state.cur_closid);
 	rmid_p = this_cpu_read(pqr_state.cur_rmid);
@@ -514,7 +516,7 @@ static int pseudo_lock_fn(void *_rdtgrp)
 	__wrmsr(IA32_PQR_ASSOC, rmid_p, closid_p);
 
 	/* Re-enable the hardware prefetcher(s) */
-	wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0);
+	wrmsrl(MSR_MISC_FEATURE_CONTROL, saved_msr);
 	local_irq_enable();
 
 	plr->thread_done = 1;
@@ -871,6 +873,7 @@ bool rdtgroup_pseudo_locked_in_hierarchy(struct rdt_domain *d)
 static int measure_cycles_lat_fn(void *_plr)
 {
 	struct pseudo_lock_region *plr = _plr;
+	u32 saved_low, saved_high;
 	unsigned long i;
 	u64 start, end;
 	void *mem_r;
@@ -879,6 +882,7 @@ static int measure_cycles_lat_fn(void *_plr)
 	/*
 	 * Disable hardware prefetchers.
 	 */
+	rdmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high);
 	wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0);
 	mem_r = READ_ONCE(plr->kmem);
 	/*
@@ -895,7 +899,7 @@ static int measure_cycles_lat_fn(void *_plr)
 		end = rdtsc_ordered();
 		trace_pseudo_lock_mem_latency((u32)(end - start));
 	}
-	wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0);
+	wrmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high);
 	local_irq_enable();
 	plr->thread_done = 1;
 	wake_up_interruptible(&plr->lock_thread_wq);
@@ -940,6 +944,7 @@ static int measure_residency_fn(struct perf_event_attr *miss_attr,
 	u64 hits_before = 0, hits_after = 0, miss_before = 0, miss_after = 0;
 	struct perf_event *miss_event, *hit_event;
 	int hit_pmcnum, miss_pmcnum;
+	u32 saved_low, saved_high;
 	unsigned int line_size;
 	unsigned int size;
 	unsigned long i;
@@ -973,6 +978,7 @@ static int measure_residency_fn(struct perf_event_attr *miss_attr,
 	/*
 	 * Disable hardware prefetchers.
 	 */
+	rdmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high);
 	wrmsr(MSR_MISC_FEATURE_CONTROL, prefetch_disable_bits, 0x0);
 
 	/* Initialize rest of local variables */
@@ -1031,7 +1037,7 @@ static int measure_residency_fn(struct perf_event_attr *miss_attr,
 	 */
 	rmb();
 	/* Re-enable hardware prefetchers */
-	wrmsr(MSR_MISC_FEATURE_CONTROL, 0x0, 0x0);
+	wrmsr(MSR_MISC_FEATURE_CONTROL, saved_low, saved_high);
 	local_irq_enable();
 out_hit:
 	perf_event_release_kernel(hit_event);

arch/x86/kvm/emulate.c

@@ -1936,7 +1936,7 @@ static int em_pop_sreg(struct x86_emulate_ctxt *ctxt)
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
-	if (ctxt->modrm_reg == VCPU_SREG_SS)
+	if (seg == VCPU_SREG_SS)
 		ctxt->interruptibility = KVM_X86_SHADOW_INT_MOV_SS;
 	if (ctxt->op_bytes > 2)
 		rsp_increment(ctxt, ctxt->op_bytes - 2);

arch/x86/kvm/vmx/nested.c

@@ -2313,9 +2313,14 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct loaded_vmcs *vmcs0
 	 * are emulated by vmx_set_efer() in prepare_vmcs02(), but speculate
 	 * on the related bits (if supported by the CPU) in the hope that
 	 * we can avoid VMWrites during vmx_set_efer().
+	 *
+	 * Similarly, take vmcs01's PERF_GLOBAL_CTRL in the hope that if KVM is
+	 * loading PERF_GLOBAL_CTRL via the VMCS for L1, then KVM will want to
+	 * do the same for L2.
 	 */
 	exec_control = __vm_entry_controls_get(vmcs01);
-	exec_control |= vmcs12->vm_entry_controls;
+	exec_control |= (vmcs12->vm_entry_controls &
+			 ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL);
 	exec_control &= ~(VM_ENTRY_IA32E_MODE | VM_ENTRY_LOAD_IA32_EFER);
 	if (cpu_has_load_ia32_efer()) {
 		if (guest_efer & EFER_LMA)
@@ -3821,7 +3826,16 @@ static void nested_vmx_inject_exception_vmexit(struct kvm_vcpu *vcpu,
 	u32 intr_info = nr | INTR_INFO_VALID_MASK;
 
 	if (vcpu->arch.exception.has_error_code) {
-		vmcs12->vm_exit_intr_error_code = vcpu->arch.exception.error_code;
+		/*
+		 * Intel CPUs do not generate error codes with bits 31:16 set,
+		 * and more importantly VMX disallows setting bits 31:16 in the
+		 * injected error code for VM-Entry.  Drop the bits to mimic
+		 * hardware and avoid inducing failure on nested VM-Entry if L1
+		 * chooses to inject the exception back to L2.  AMD CPUs _do_
+		 * generate "full" 32-bit error codes, so KVM allows userspace
+		 * to inject exception error codes with bits 31:16 set.
+		 */
+		vmcs12->vm_exit_intr_error_code = (u16)vcpu->arch.exception.error_code;
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
 	}
 
@@ -4251,14 +4265,6 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 			nested_vmx_abort(vcpu,
 					 VMX_ABORT_SAVE_GUEST_MSR_FAIL);
 	}
-
-	/*
-	 * Drop what we picked up for L2 via vmx_complete_interrupts. It is
-	 * preserved above and would only end up incorrectly in L1.
-	 */
-	vcpu->arch.nmi_injected = false;
-	kvm_clear_exception_queue(vcpu);
-	kvm_clear_interrupt_queue(vcpu);
 }
 
 /*
@@ -4598,6 +4604,17 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason,
 		WARN_ON_ONCE(nested_early_check);
 	}
 
+	/*
+	 * Drop events/exceptions that were queued for re-injection to L2
+	 * (picked up via vmx_complete_interrupts()), as well as exceptions
+	 * that were pending for L2.  Note, this must NOT be hoisted above
+	 * prepare_vmcs12(), events/exceptions queued for re-injection need to
+	 * be captured in vmcs12 (see vmcs12_save_pending_event()).
+	 */
+	vcpu->arch.nmi_injected = false;
+	kvm_clear_exception_queue(vcpu);
+	kvm_clear_interrupt_queue(vcpu);
+
 	vmx_switch_vmcs(vcpu, &vmx->vmcs01);
 
 	/* Update any VMCS fields that might have changed while L2 ran */

arch/x86/kvm/vmx/vmx.c

@@ -1676,7 +1676,17 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu)
 	kvm_deliver_exception_payload(vcpu);
 
 	if (has_error_code) {
-		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
+		/*
+		 * Despite the error code being architecturally defined as 32
+		 * bits, and the VMCS field being 32 bits, Intel CPUs and thus
+		 * VMX don't actually supporting setting bits 31:16.  Hardware
+		 * will (should) never provide a bogus error code, but AMD CPUs
+		 * do generate error codes with bits 31:16 set, and so KVM's
+		 * ABI lets userspace shove in arbitrary 32-bit values.  Drop
+		 * the upper bits to avoid VM-Fail, losing information that
+		 * does't really exist is preferable to killing the VM.
+		 */
+		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, (u16)error_code);
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
 	}
 

arch/x86/xen/enlighten_pv.c

@@ -759,6 +759,7 @@ static void xen_load_idt(const struct desc_ptr *desc)
 {
 	static DEFINE_SPINLOCK(lock);
 	static struct trap_info traps[257];
+	static const struct trap_info zero = { };
 	unsigned out;
 
 	trace_xen_cpu_load_idt(desc);
@@ -768,7 +769,7 @@ static void xen_load_idt(const struct desc_ptr *desc)
 	memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc));
 
 	out = xen_convert_trap_info(desc, traps, false);
-	memset(&traps[out], 0, sizeof(traps[0]));
+	traps[out] = zero;
 
 	xen_mc_flush();
 	if (HYPERVISOR_set_trap_table(traps))

block/blk-throttle.c

@@ -950,7 +950,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
 				 u64 bps_limit, unsigned long *wait)
 {
 	bool rw = bio_data_dir(bio);
-	u64 bytes_allowed, extra_bytes, tmp;
+	u64 bytes_allowed, extra_bytes;
 	unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;
 	unsigned int bio_size = throtl_bio_data_size(bio);
 
@@ -967,10 +967,8 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
 		jiffy_elapsed_rnd = tg->td->throtl_slice;
 
 	jiffy_elapsed_rnd = roundup(jiffy_elapsed_rnd, tg->td->throtl_slice);
-
+	bytes_allowed = mul_u64_u64_div_u64(bps_limit, (u64)jiffy_elapsed_rnd,
-	tmp = bps_limit * jiffy_elapsed_rnd;
+					    (u64)HZ);
-	do_div(tmp, HZ);
-	bytes_allowed = tmp;
 
 	if (tg->bytes_disp[rw] + bio_size <= bytes_allowed) {
 		if (wait)

block/blk-wbt.c

@@ -841,8 +841,11 @@ int wbt_init(struct request_queue *q)
 	rwb->last_comp = rwb->last_issue = jiffies;
 	rwb->win_nsec = RWB_WINDOW_NSEC;
 	rwb->enable_state = WBT_STATE_ON_DEFAULT;
-	rwb->wc = 1;
+	rwb->wc = test_bit(QUEUE_FLAG_WC, &q->queue_flags);
 	rwb->rq_depth.default_depth = RWB_DEF_DEPTH;
+	rwb->min_lat_nsec = wbt_default_latency_nsec(q);
+
+	wbt_queue_depth_changed(&rwb->rqos);
 
 	/*
 	 * Assign rwb and add the stats callback.
@@ -853,11 +856,6 @@ int wbt_init(struct request_queue *q)
 
 	blk_stat_add_callback(q, rwb->cb);
 
-	rwb->min_lat_nsec = wbt_default_latency_nsec(q);
-
-	wbt_queue_depth_changed(&rwb->rqos);
-	wbt_set_write_cache(q, test_bit(QUEUE_FLAG_WC, &q->queue_flags));
-
 	return 0;
 
 err_free:

crypto/akcipher.c

@@ -120,6 +120,12 @@ static int akcipher_default_op(struct akcipher_request *req)
 	return -ENOSYS;
 }
 
+static int akcipher_default_set_key(struct crypto_akcipher *tfm,
+				     const void *key, unsigned int keylen)
+{
+	return -ENOSYS;
+}
+
 int crypto_register_akcipher(struct akcipher_alg *alg)
 {
 	struct crypto_alg *base = &alg->base;
@@ -132,6 +138,8 @@ int crypto_register_akcipher(struct akcipher_alg *alg)
 		alg->encrypt = akcipher_default_op;
 	if (!alg->decrypt)
 		alg->decrypt = akcipher_default_op;
+	if (!alg->set_priv_key)
+		alg->set_priv_key = akcipher_default_set_key;
 
 	akcipher_prepare_alg(alg);
 	return crypto_register_alg(base);

drivers/acpi/acpi_fpdt.c

@@ -143,6 +143,23 @@ static const struct attribute_group boot_attr_group = {
 
 static struct kobject *fpdt_kobj;
 
+#if defined CONFIG_X86 && defined CONFIG_PHYS_ADDR_T_64BIT
+#include <linux/processor.h>
+static bool fpdt_address_valid(u64 address)
+{
+	/*
+	 * On some systems the table contains invalid addresses
+	 * with unsuppored high address bits set, check for this.
+	 */
+	return !(address >> boot_cpu_data.x86_phys_bits);
+}
+#else
+static bool fpdt_address_valid(u64 address)
+{
+	return true;
+}
+#endif
+
 static int fpdt_process_subtable(u64 address, u32 subtable_type)
 {
 	struct fpdt_subtable_header *subtable_header;
@@ -151,6 +168,11 @@ static int fpdt_process_subtable(u64 address, u32 subtable_type)
 	u32 length, offset;
 	int result;
 
+	if (!fpdt_address_valid(address)) {
+		pr_info(FW_BUG "invalid physical address: 0x%llx!\n", address);
+		return -EINVAL;
+	}
+
 	subtable_header = acpi_os_map_memory(address, sizeof(*subtable_header));
 	if (!subtable_header)
 		return -ENOMEM;

drivers/acpi/acpi_video.c

@@ -496,6 +496,22 @@ static const struct dmi_system_id video_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE R830"),
 		},
 	},
+	{
+	 .callback = video_disable_backlight_sysfs_if,
+	 .ident = "Toshiba Satellite Z830",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE Z830"),
+		},
+	},
+	{
+	 .callback = video_disable_backlight_sysfs_if,
+	 .ident = "Toshiba Portege Z830",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE Z830"),
+		},
+	},
 	/*
 	 * Some machine's _DOD IDs don't have bit 31(Device ID Scheme) set
 	 * but the IDs actually follow the Device ID Scheme.

drivers/acpi/apei/ghes.c

@@ -985,7 +985,7 @@ static void ghes_proc_in_irq(struct irq_work *irq_work)
 				ghes_estatus_cache_add(generic, estatus);
 		}
 
-		if (task_work_pending && current->mm != &init_mm) {
+		if (task_work_pending && current->mm) {
 			estatus_node->task_work.func = ghes_kick_task_work;
 			estatus_node->task_work_cpu = smp_processor_id();
 			ret = task_work_add(current, &estatus_node->task_work,

drivers/acpi/x86/utils.c

@@ -198,7 +198,24 @@ static const struct x86_cpu_id storage_d3_cpu_ids[] = {
 	{}
 };
 
+static const struct dmi_system_id force_storage_d3_dmi[] = {
+	{
+		/*
+		 * _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME
+		 * but .NVME is needed to get StorageD3Enable node
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=216440
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14 7425 2-in-1"),
+		}
+	},
+	{}
+};
+
 bool force_storage_d3(void)
 {
-	return x86_match_cpu(storage_d3_cpu_ids);
+	const struct dmi_system_id *dmi_id = dmi_first_match(force_storage_d3_dmi);
+
+	return dmi_id || x86_match_cpu(storage_d3_cpu_ids);
 }

drivers/ata/libahci_platform.c

@@ -451,14 +451,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
 		}
 	}
 
-	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
+	/*
+	 * Too many sub-nodes most likely means having something wrong with
+	 * the firmware.
+	 */
+	child_nodes = of_get_child_count(dev->of_node);
+	if (child_nodes > AHCI_MAX_PORTS) {
+		rc = -EINVAL;
+		goto err_out;
+	}
 
 	/*
 	 * If no sub-node was found, we still need to set nports to
 	 * one in order to be able to use the
 	 * ahci_platform_[en|dis]able_[phys|regulators] functions.
 	 */
-	if (!child_nodes)
+	if (child_nodes)
+		hpriv->nports = child_nodes;
+	else
 		hpriv->nports = 1;
 
 	hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL);

drivers/base/arch_topology.c

@@ -698,4 +698,23 @@ void __init init_cpu_topology(void)
 	else if (of_have_populated_dt() && parse_dt_topology())
 		reset_cpu_topology();
 }
+
+void store_cpu_topology(unsigned int cpuid)
+{
+	struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
+
+	if (cpuid_topo->package_id != -1)
+		goto topology_populated;
+
+	cpuid_topo->thread_id = -1;
+	cpuid_topo->core_id = cpuid;
+	cpuid_topo->package_id = cpu_to_node(cpuid);
+
+	pr_debug("CPU%u: package %d core %d thread %d\n",
+		 cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
+		 cpuid_topo->thread_id);
+
+topology_populated:
+	update_siblings_masks(cpuid);
+}
 #endif

drivers/block/nbd.c

@@ -1351,10 +1351,12 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
 	mutex_unlock(&nbd->config_lock);
 	ret = wait_event_interruptible(config->recv_wq,
 					 atomic_read(&config->recv_threads) == 0);
-	if (ret)
+	if (ret) {
 		sock_shutdown(nbd);
-	flush_workqueue(nbd->recv_workq);
+		nbd_clear_que(nbd);
+	}
 
+	flush_workqueue(nbd->recv_workq);
 	mutex_lock(&nbd->config_lock);
 	nbd_bdev_reset(bdev);
 	/* user requested, ignore socket errors */

drivers/bluetooth/btintel.c

@@ -2274,15 +2274,20 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 					       INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
 				set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
 					&hdev->quirks);
+			if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+				set_bit(HCI_QUIRK_VALID_LE_STATES,
+					&hdev->quirks);
 
 			err = btintel_legacy_rom_setup(hdev, &ver);
 			break;
 		case 0x0b:      /* SfP */
-		case 0x0c:      /* WsP */
 		case 0x11:      /* JfP */
 		case 0x12:      /* ThP */
 		case 0x13:      /* HrP */
 		case 0x14:      /* CcP */
+			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+			fallthrough;
+		case 0x0c:	/* WsP */
 			/* Apply the device specific HCI quirks
 			 *
 			 * All Legacy bootloader devices support WBS
@@ -2290,11 +2295,6 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
 				&hdev->quirks);
 
-			/* Valid LE States quirk for JfP/ThP familiy */
-			if (ver.hw_variant == 0x11 || ver.hw_variant == 0x12)
-				set_bit(HCI_QUIRK_VALID_LE_STATES,
-					&hdev->quirks);
-
 			/* Setup MSFT Extension support */
 			btintel_set_msft_opcode(hdev, ver.hw_variant);
 
@@ -2361,9 +2361,8 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		 */
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 
-		/* Valid LE States quirk for JfP/ThP familiy */
+		/* Set Valid LE States quirk */
-		if (ver.hw_variant == 0x11 || ver.hw_variant == 0x12)
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
-			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 
 		/* Setup MSFT Extension support */
 		btintel_set_msft_opcode(hdev, ver.hw_variant);

drivers/bluetooth/btusb.c

@@ -2435,15 +2435,29 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
 
 	set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
 
+	/* WMT cmd/event doesn't follow up the generic HCI cmd/event handling,
+	 * it needs constantly polling control pipe until the host received the
+	 * WMT event, thus, we should require to specifically acquire PM counter
+	 * on the USB to prevent the interface from entering auto suspended
+	 * while WMT cmd/event in progress.
+	 */
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		goto err_free_wc;
+
 	err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
 
 	if (err < 0) {
 		clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
+		usb_autopm_put_interface(data->intf);
 		goto err_free_wc;
 	}
 
 	/* Submit control IN URB on demand to process the WMT event */
 	err = btusb_mtk_submit_wmt_recv_urb(hdev);
+
+	usb_autopm_put_interface(data->intf);
+
 	if (err < 0)
 		goto err_free_wc;
 

drivers/bluetooth/hci_ldisc.c

@@ -490,6 +490,11 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 		BT_ERR("Can't allocate control structure");
 		return -ENFILE;
 	}
+	if (percpu_init_rwsem(&hu->proto_lock)) {
+		BT_ERR("Can't allocate semaphore structure");
+		kfree(hu);
+		return -ENOMEM;
+	}
 
 	tty->disc_data = hu;
 	hu->tty = tty;
@@ -502,8 +507,6 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
 
-	percpu_init_rwsem(&hu->proto_lock);
-
 	/* Flush any pending characters in the driver */
 	tty_driver_flush_buffer(tty);
 

drivers/bluetooth/hci_serdev.c

@@ -301,11 +301,12 @@ int hci_uart_register_device(struct hci_uart *hu,
 
 	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);
 
+	if (percpu_init_rwsem(&hu->proto_lock))
+		return -ENOMEM;
+
 	err = serdev_device_open(hu->serdev);
 	if (err)
-		return err;
+		goto err_rwsem;
-
-	percpu_init_rwsem(&hu->proto_lock);
 
 	err = p->open(hu);
 	if (err)
@@ -378,6 +379,8 @@ err_alloc:
 	p->close(hu);
 err_open:
 	serdev_device_close(hu->serdev);
+err_rwsem:
+	percpu_free_rwsem(&hu->proto_lock);
 	return err;
 }
 EXPORT_SYMBOL_GPL(hci_uart_register_device);
@@ -399,5 +402,6 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 		serdev_device_close(hu->serdev);
 	}
+	percpu_free_rwsem(&hu->proto_lock);
 }
 EXPORT_SYMBOL_GPL(hci_uart_unregister_device);

drivers/char/hw_random/arm_smccc_trng.c

@@ -71,8 +71,6 @@ static int smccc_trng_read(struct hwrng *rng, void *data, size_t max, bool wait)
 				  MAX_BITS_PER_CALL);
 
 		arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND, bits, &res);
-		if ((int)res.a0 < 0)
-			return (int)res.a0;
 
 		switch ((int)res.a0) {
 		case SMCCC_RET_SUCCESS:
@@ -88,6 +86,8 @@ static int smccc_trng_read(struct hwrng *rng, void *data, size_t max, bool wait)
 				return copied;
 			cond_resched();
 			break;
+		default:
+			return -EIO;
 		}
 	}
 

drivers/char/hw_random/imx-rngc.c

@@ -270,13 +270,6 @@ static int imx_rngc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	ret = devm_request_irq(&pdev->dev,
-			irq, imx_rngc_irq, 0, pdev->name, (void *)rngc);
-	if (ret) {
-		dev_err(rngc->dev, "Can't get interrupt working.\n");
-		goto err;
-	}
-
 	init_completion(&rngc->rng_op_done);
 
 	rngc->rng.name = pdev->name;
@@ -290,6 +283,13 @@ static int imx_rngc_probe(struct platform_device *pdev)
 
 	imx_rngc_irq_mask_clear(rngc);
 
+	ret = devm_request_irq(&pdev->dev,
+			irq, imx_rngc_irq, 0, pdev->name, (void *)rngc);
+	if (ret) {
+		dev_err(rngc->dev, "Can't get interrupt working.\n");
+		return ret;
+	}
+
 	if (self_test) {
 		ret = imx_rngc_self_test(rngc);
 		if (ret) {

drivers/clk/baikal-t1/ccu-div.c

@@ -34,6 +34,7 @@
 #define CCU_DIV_CTL_CLKDIV_MASK(_width) \
 	GENMASK((_width) + CCU_DIV_CTL_CLKDIV_FLD - 1, CCU_DIV_CTL_CLKDIV_FLD)
 #define CCU_DIV_CTL_LOCK_SHIFTED	BIT(27)
+#define CCU_DIV_CTL_GATE_REF_BUF	BIT(28)
 #define CCU_DIV_CTL_LOCK_NORMAL		BIT(31)
 
 #define CCU_DIV_RST_DELAY_US		1
@@ -170,6 +171,40 @@ static int ccu_div_gate_is_enabled(struct clk_hw *hw)
 	return !!(val & CCU_DIV_CTL_EN);
 }
 
+static int ccu_div_buf_enable(struct clk_hw *hw)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&div->lock, flags);
+	regmap_update_bits(div->sys_regs, div->reg_ctl,
+			   CCU_DIV_CTL_GATE_REF_BUF, 0);
+	spin_unlock_irqrestore(&div->lock, flags);
+
+	return 0;
+}
+
+static void ccu_div_buf_disable(struct clk_hw *hw)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&div->lock, flags);
+	regmap_update_bits(div->sys_regs, div->reg_ctl,
+			   CCU_DIV_CTL_GATE_REF_BUF, CCU_DIV_CTL_GATE_REF_BUF);
+	spin_unlock_irqrestore(&div->lock, flags);
+}
+
+static int ccu_div_buf_is_enabled(struct clk_hw *hw)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	u32 val = 0;
+
+	regmap_read(div->sys_regs, div->reg_ctl, &val);
+
+	return !(val & CCU_DIV_CTL_GATE_REF_BUF);
+}
+
 static unsigned long ccu_div_var_recalc_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
@@ -323,6 +358,7 @@ static const struct ccu_div_dbgfs_bit ccu_div_bits[] = {
 	CCU_DIV_DBGFS_BIT_ATTR("div_en", CCU_DIV_CTL_EN),
 	CCU_DIV_DBGFS_BIT_ATTR("div_rst", CCU_DIV_CTL_RST),
 	CCU_DIV_DBGFS_BIT_ATTR("div_bypass", CCU_DIV_CTL_SET_CLKDIV),
+	CCU_DIV_DBGFS_BIT_ATTR("div_buf", CCU_DIV_CTL_GATE_REF_BUF),
 	CCU_DIV_DBGFS_BIT_ATTR("div_lock", CCU_DIV_CTL_LOCK_NORMAL)
 };
 
@@ -441,6 +477,9 @@ static void ccu_div_var_debug_init(struct clk_hw *hw, struct dentry *dentry)
 			continue;
 		}
 
+		if (!strcmp("div_buf", name))
+			continue;
+
 		bits[didx] = ccu_div_bits[bidx];
 		bits[didx].div = div;
 
@@ -477,6 +516,21 @@ static void ccu_div_gate_debug_init(struct clk_hw *hw, struct dentry *dentry)
 				   &ccu_div_dbgfs_fixed_clkdiv_fops);
 }
 
+static void ccu_div_buf_debug_init(struct clk_hw *hw, struct dentry *dentry)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	struct ccu_div_dbgfs_bit *bit;
+
+	bit = kmalloc(sizeof(*bit), GFP_KERNEL);
+	if (!bit)
+		return;
+
+	*bit = ccu_div_bits[3];
+	bit->div = div;
+	debugfs_create_file_unsafe(bit->name, ccu_div_dbgfs_mode, dentry, bit,
+				   &ccu_div_dbgfs_bit_fops);
+}
+
 static void ccu_div_fixed_debug_init(struct clk_hw *hw, struct dentry *dentry)
 {
 	struct ccu_div *div = to_ccu_div(hw);
@@ -489,6 +543,7 @@ static void ccu_div_fixed_debug_init(struct clk_hw *hw, struct dentry *dentry)
 
 #define ccu_div_var_debug_init NULL
 #define ccu_div_gate_debug_init NULL
+#define ccu_div_buf_debug_init NULL
 #define ccu_div_fixed_debug_init NULL
 
 #endif /* !CONFIG_DEBUG_FS */
@@ -520,6 +575,13 @@ static const struct clk_ops ccu_div_gate_ops = {
 	.debug_init = ccu_div_gate_debug_init
 };
 
+static const struct clk_ops ccu_div_buf_ops = {
+	.enable = ccu_div_buf_enable,
+	.disable = ccu_div_buf_disable,
+	.is_enabled = ccu_div_buf_is_enabled,
+	.debug_init = ccu_div_buf_debug_init
+};
+
 static const struct clk_ops ccu_div_fixed_ops = {
 	.recalc_rate = ccu_div_fixed_recalc_rate,
 	.round_rate = ccu_div_fixed_round_rate,
@@ -566,6 +628,8 @@ struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *div_init)
 	} else if (div_init->type == CCU_DIV_GATE) {
 		hw_init.ops = &ccu_div_gate_ops;
 		div->divider = div_init->divider;
+	} else if (div_init->type == CCU_DIV_BUF) {
+		hw_init.ops = &ccu_div_buf_ops;
 	} else if (div_init->type == CCU_DIV_FIXED) {
 		hw_init.ops = &ccu_div_fixed_ops;
 		div->divider = div_init->divider;
@@ -579,6 +643,7 @@ struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *div_init)
 		goto err_free_div;
 	}
 	parent_data.fw_name = div_init->parent_name;
+	parent_data.name = div_init->parent_name;
 	hw_init.parent_data = &parent_data;
 	hw_init.num_parents = 1;
 

drivers/clk/baikal-t1/ccu-div.h

@@ -13,6 +13,14 @@
 #include <linux/bits.h>
 #include <linux/of.h>
 
+/*
+ * CCU Divider private clock IDs
+ * @CCU_SYS_SATA_CLK: CCU SATA internal clock
+ * @CCU_SYS_XGMAC_CLK: CCU XGMAC internal clock
+ */
+#define CCU_SYS_SATA_CLK		-1
+#define CCU_SYS_XGMAC_CLK		-2
+
 /*
  * CCU Divider private flags
  * @CCU_DIV_SKIP_ONE: Due to some reason divider can't be set to 1.
@@ -31,11 +39,13 @@
  * enum ccu_div_type - CCU Divider types
  * @CCU_DIV_VAR: Clocks gate with variable divider.
  * @CCU_DIV_GATE: Clocks gate with fixed divider.
+ * @CCU_DIV_BUF: Clock gate with no divider.
  * @CCU_DIV_FIXED: Ungateable clock with fixed divider.
  */
 enum ccu_div_type {
 	CCU_DIV_VAR,
 	CCU_DIV_GATE,
+	CCU_DIV_BUF,
 	CCU_DIV_FIXED
 };
 

drivers/clk/baikal-t1/clk-ccu-div.c

@@ -76,6 +76,16 @@
 		.divider = _divider				\
 	}
 
+#define CCU_DIV_BUF_INFO(_id, _name, _pname, _base, _flags)	\
+	{							\
+		.id = _id,					\
+		.name = _name,					\
+		.parent_name = _pname,				\
+		.base = _base,					\
+		.type = CCU_DIV_BUF,				\
+		.flags = _flags					\
+	}
+
 #define CCU_DIV_FIXED_INFO(_id, _name, _pname, _divider)	\
 	{							\
 		.id = _id,					\
@@ -188,11 +198,14 @@ static const struct ccu_div_rst_map axi_rst_map[] = {
  * for the SoC devices registers IO-operations.
  */
 static const struct ccu_div_info sys_info[] = {
-	CCU_DIV_VAR_INFO(CCU_SYS_SATA_REF_CLK, "sys_sata_ref_clk",
+	CCU_DIV_VAR_INFO(CCU_SYS_SATA_CLK, "sys_sata_clk",
 			 "sata_clk", CCU_SYS_SATA_REF_BASE, 4,
 			 CLK_SET_RATE_GATE,
 			 CCU_DIV_SKIP_ONE | CCU_DIV_LOCK_SHIFTED |
 			 CCU_DIV_RESET_DOMAIN),
+	CCU_DIV_BUF_INFO(CCU_SYS_SATA_REF_CLK, "sys_sata_ref_clk",
+			 "sys_sata_clk", CCU_SYS_SATA_REF_BASE,
+			 CLK_SET_RATE_PARENT),
 	CCU_DIV_VAR_INFO(CCU_SYS_APB_CLK, "sys_apb_clk",
 			 "pcie_clk", CCU_SYS_APB_BASE, 5,
 			 CLK_IS_CRITICAL, CCU_DIV_RESET_DOMAIN),
@@ -204,10 +217,12 @@ static const struct ccu_div_info sys_info[] = {
 			  "eth_clk", CCU_SYS_GMAC1_BASE, 5),
 	CCU_DIV_FIXED_INFO(CCU_SYS_GMAC1_PTP_CLK, "sys_gmac1_ptp_clk",
 			   "eth_clk", 10),
-	CCU_DIV_GATE_INFO(CCU_SYS_XGMAC_REF_CLK, "sys_xgmac_ref_clk",
+	CCU_DIV_GATE_INFO(CCU_SYS_XGMAC_CLK, "sys_xgmac_clk",
-			  "eth_clk", CCU_SYS_XGMAC_BASE, 8),
+			  "eth_clk", CCU_SYS_XGMAC_BASE, 1),
+	CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_REF_CLK, "sys_xgmac_ref_clk",
+			   "sys_xgmac_clk", 8),
 	CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_PTP_CLK, "sys_xgmac_ptp_clk",
-			   "eth_clk", 10),
+			   "sys_xgmac_clk", 8),
 	CCU_DIV_GATE_INFO(CCU_SYS_USB_CLK, "sys_usb_clk",
 			  "eth_clk", CCU_SYS_USB_BASE, 10),
 	CCU_DIV_VAR_INFO(CCU_SYS_PVT_CLK, "sys_pvt_clk",
@@ -396,6 +411,9 @@ static int ccu_div_clk_register(struct ccu_div_data *data)
 			init.base = info->base;
 			init.sys_regs = data->sys_regs;
 			init.divider = info->divider;
+		} else if (init.type == CCU_DIV_BUF) {
+			init.base = info->base;
+			init.sys_regs = data->sys_regs;
 		} else {
 			init.divider = info->divider;
 		}

drivers/clk/bcm/clk-bcm2835.c

@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/math.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -502,6 +503,8 @@ struct bcm2835_clock_data {
 	bool low_jitter;
 
 	u32 tcnt_mux;
+
+	bool round_up;
 };
 
 struct bcm2835_gate_data {
@@ -967,9 +970,9 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
 	return div;
 }
 
-static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
-					    unsigned long parent_rate,
+						     unsigned long parent_rate,
-					    u32 div)
+						     u32 div)
 {
 	const struct bcm2835_clock_data *data = clock->data;
 	u64 temp;
@@ -994,12 +997,34 @@ static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
 	return temp;
 }
 
+static unsigned long bcm2835_round_rate(unsigned long rate)
+{
+	unsigned long scaler;
+	unsigned long limit;
+
+	limit = rate / 100000;
+
+	scaler = 1;
+	while (scaler < limit)
+		scaler *= 10;
+
+	/*
+	 * If increasing a clock by less than 0.1% changes it
+	 * from ..999.. to ..000.., round up.
+	 */
+	if ((rate + scaler - 1) / scaler % 1000 == 0)
+		rate = roundup(rate, scaler);
+
+	return rate;
+}
+
 static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
 					    unsigned long parent_rate)
 {
 	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
 	struct bcm2835_cprman *cprman = clock->cprman;
 	const struct bcm2835_clock_data *data = clock->data;
+	unsigned long rate;
 	u32 div;
 
 	if (data->int_bits == 0 && data->frac_bits == 0)
@@ -1007,7 +1032,12 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
 
 	div = cprman_read(cprman, data->div_reg);
 
-	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+	rate = bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+
+	if (data->round_up)
+		rate = bcm2835_round_rate(rate);
+
+	return rate;
 }
 
 static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
@@ -1785,7 +1815,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.load_mask = CM_PLLC_LOADPER,
 		.hold_mask = CM_PLLC_HOLDPER,
 		.fixed_divider = 1,
-		.flags = CLK_SET_RATE_PARENT),
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
 
 	/*
 	 * PLLD is the display PLL, used to drive DSI display panels.
@@ -2144,7 +2174,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.div_reg = CM_UARTDIV,
 		.int_bits = 10,
 		.frac_bits = 12,
-		.tcnt_mux = 28),
+		.tcnt_mux = 28,
+		.round_up = true),
 
 	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
 	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(

drivers/clk/berlin/bg2.c

@@ -500,12 +500,15 @@ static void __init berlin2_clock_setup(struct device_node *np)
 	int n, ret;
 
 	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
-	if (!clk_data)
+	if (!clk_data) {
+		of_node_put(parent_np);
 		return;
+	}
 	clk_data->num = MAX_CLKS;
 	hws = clk_data->hws;
 
 	gbase = of_iomap(parent_np, 0);
+	of_node_put(parent_np);
 	if (!gbase)
 		return;
 

drivers/clk/berlin/bg2q.c

@@ -286,19 +286,23 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 	int n, ret;
 
 	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
-	if (!clk_data)
+	if (!clk_data) {
+		of_node_put(parent_np);
 		return;
+	}
 	clk_data->num = MAX_CLKS;
 	hws = clk_data->hws;
 
 	gbase = of_iomap(parent_np, 0);
 	if (!gbase) {
+		of_node_put(parent_np);
 		pr_err("%pOF: Unable to map global base\n", np);
 		return;
 	}
 
 	/* BG2Q CPU PLL is not part of global registers */
 	cpupll_base = of_iomap(parent_np, 1);
+	of_node_put(parent_np);
 	if (!cpupll_base) {
 		pr_err("%pOF: Unable to map cpupll base\n", np);
 		iounmap(gbase);

drivers/clk/clk-ast2600.c

@@ -622,7 +622,7 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 	regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */
 
 	/* P-Bus (BCLK) clock divider */
-	hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
+	hw = clk_hw_register_divider_table(dev, "bclk", "epll", 0,
 			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
 			ast2600_div_table,
 			&aspeed_g6_clk_lock);

drivers/clk/clk-oxnas.c

@@ -207,7 +207,7 @@ static const struct of_device_id oxnas_stdclk_dt_ids[] = {
 
 static int oxnas_stdclk_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.of_node, *parent_np;
 	const struct oxnas_stdclk_data *data;
 	const struct of_device_id *id;
 	struct regmap *regmap;
@@ -219,7 +219,9 @@ static int oxnas_stdclk_probe(struct platform_device *pdev)
 		return -ENODEV;
 	data = id->data;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap)) {
 		dev_err(&pdev->dev, "failed to have parent regmap\n");
 		return PTR_ERR(regmap);

drivers/clk/clk-qoriq.c

@@ -1063,8 +1063,13 @@ static void __init _clockgen_init(struct device_node *np, bool legacy);
  */
 static void __init legacy_init_clockgen(struct device_node *np)
 {
-	if (!clockgen.node)
+	if (!clockgen.node) {
-		_clockgen_init(of_get_parent(np), true);
+		struct device_node *parent_np;
+
+		parent_np = of_get_parent(np);
+		_clockgen_init(parent_np, true);
+		of_node_put(parent_np);
+	}
 }
 
 /* Legacy node */
@@ -1159,6 +1164,7 @@ static struct clk * __init create_sysclk(const char *name)
 	sysclk = of_get_child_by_name(clockgen.node, "sysclk");
 	if (sysclk) {
 		clk = sysclk_from_fixed(sysclk, name);
+		of_node_put(sysclk);
 		if (!IS_ERR(clk))
 			return clk;
 	}

drivers/clk/clk-versaclock5.c

@@ -1204,7 +1204,7 @@ static const struct vc5_chip_info idt_5p49v6901_info = {
 	.model = IDT_VC6_5P49V6901,
 	.clk_fod_cnt = 4,
 	.clk_out_cnt = 5,
-	.flags = VC5_HAS_PFD_FREQ_DBL,
+	.flags = VC5_HAS_PFD_FREQ_DBL | VC5_HAS_BYPASS_SYNC_BIT,
 };
 
 static const struct vc5_chip_info idt_5p49v6965_info = {

drivers/clk/imx/clk-scu.c

@@ -690,7 +690,11 @@ struct clk_hw *imx_clk_scu_alloc_dev(const char *name,
 		pr_warn("%s: failed to attached the power domain %d\n",
 			name, ret);
 
-	platform_device_add(pdev);
+	ret = platform_device_add(pdev);
+	if (ret) {
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
 
 	/* For API backwards compatiblilty, simply return NULL for success */
 	return NULL;

drivers/clk/mediatek/clk-mt8183-mfgcfg.c

@@ -18,9 +18,9 @@ static const struct mtk_gate_regs mfg_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_MFG(_id, _name, _parent, _shift)			\
+#define GATE_MFG(_id, _name, _parent, _shift)				\
-	GATE_MTK(_id, _name, _parent, &mfg_cg_regs, _shift,	\
+	GATE_MTK_FLAGS(_id, _name, _parent, &mfg_cg_regs, _shift,	\
-		&mtk_clk_gate_ops_setclr)
+		       &mtk_clk_gate_ops_setclr, CLK_SET_RATE_PARENT)
 
 static const struct mtk_gate mfg_clks[] = {
 	GATE_MFG(CLK_MFG_BG3D, "mfg_bg3d", "mfg_sel", 0)

drivers/clk/meson/meson-aoclk.c

@@ -38,6 +38,7 @@ int meson_aoclkc_probe(struct platform_device *pdev)
 	struct meson_aoclk_reset_controller *rstc;
 	struct meson_aoclk_data *data;
 	struct device *dev = &pdev->dev;
+	struct device_node *np;
 	struct regmap *regmap;
 	int ret, clkid;
 
@@ -49,7 +50,9 @@ int meson_aoclkc_probe(struct platform_device *pdev)
 	if (!rstc)
 		return -ENOMEM;
 
-	regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	np = of_get_parent(dev->of_node);
+	regmap = syscon_node_to_regmap(np);
+	of_node_put(np);
 	if (IS_ERR(regmap)) {
 		dev_err(dev, "failed to get regmap\n");
 		return PTR_ERR(regmap);

drivers/clk/meson/meson-eeclk.c

@@ -18,6 +18,7 @@ int meson_eeclkc_probe(struct platform_device *pdev)
 {
 	const struct meson_eeclkc_data *data;
 	struct device *dev = &pdev->dev;
+	struct device_node *np;
 	struct regmap *map;
 	int ret, i;
 
@@ -26,7 +27,9 @@ int meson_eeclkc_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	/* Get the hhi system controller node */
-	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	np = of_get_parent(dev->of_node);
+	map = syscon_node_to_regmap(np);
+	of_node_put(np);
 	if (IS_ERR(map)) {
 		dev_err(dev,
 			"failed to get HHI regmap\n");

drivers/clk/meson/meson8b.c

@@ -3717,12 +3717,15 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 			struct clk_hw_onecell_data *clk_hw_onecell_data)
 {
 	struct meson8b_clk_reset *rstc;
+	struct device_node *parent_np;
 	const char *notifier_clk_name;
 	struct clk *notifier_clk;
 	struct regmap *map;
 	int i, ret;
 
-	map = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	map = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(map)) {
 		pr_err("failed to get HHI regmap - Trying obsolete regs\n");
 		return;