Merge 5.15.61 into android14-5.15
Changes in 5.15.61
Makefile: link with -z noexecstack --no-warn-rwx-segments
x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments
Revert "pNFS: nfs3_set_ds_client should set NFS_CS_NOPING"
scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"
pNFS/flexfiles: Report RDMA connection errors to the server
NFSD: Clean up the show_nf_flags() macro
nfsd: eliminate the NFSD_FILE_BREAK_* flags
ALSA: usb-audio: Add quirk for Behringer UMC202HD
ALSA: bcd2000: Fix a UAF bug on the error path of probing
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
wifi: mac80211_hwsim: fix race condition in pending packet
wifi: mac80211_hwsim: add back erroneously removed cast
wifi: mac80211_hwsim: use 32-bit skb cookie
add barriers to buffer_uptodate and set_buffer_uptodate
lockd: detect and reject lock arguments that overflow
HID: hid-input: add Surface Go battery quirk
HID: wacom: Only report rotation for art pen
HID: wacom: Don't register pad_input for touch switch
KVM: nVMX: Snapshot pre-VM-Enter BNDCFGS for !nested_run_pending case
KVM: nVMX: Snapshot pre-VM-Enter DEBUGCTL for !nested_run_pending case
KVM: SVM: Don't BUG if userspace injects an interrupt with GIF=0
KVM: s390: pv: don't present the ecall interrupt twice
KVM: x86: Split kvm_is_valid_cr4() and export only the non-vendor bits
KVM: nVMX: Let userspace set nVMX MSR to any _host_ supported value
KVM: nVMX: Account for KVM reserved CR4 bits in consistency checks
KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4
KVM: x86: Mark TSS busy during LTR emulation _after_ all fault checks
KVM: x86: Set error code to segment selector on LLDT/LTR non-canonical #GP
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
KVM: x86: Tag kvm_mmu_x86_module_init() with __init
KVM: x86: do not report preemption if the steal time cache is stale
KVM: x86: revalidate steal time cache if MSR value changes
riscv: set default pm_power_off to NULL
ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model
ALSA: hda/cirrus - support for iMac 12,1 model
ALSA: hda/realtek: Add quirk for another Asus K42JZ model
ALSA: hda/realtek: Add a quirk for HP OMEN 15 (8786) mute LED
tty: vt: initialize unicode screen buffer
vfs: Check the truncate maximum size in inode_newsize_ok()
fs: Add missing umask strip in vfs_tmpfile
thermal: sysfs: Fix cooling_device_stats_setup() error code path
fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters
fbcon: Fix accelerated fbdev scrolling while logo is still shown
usbnet: Fix linkwatch use-after-free on disconnect
fix short copy handling in copy_mc_pipe_to_iter()
crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent kernel memory leak
ovl: drop WARN_ON() dentry is NULL in ovl_encode_fh()
parisc: Fix device names in /proc/iomem
parisc: Drop pa_swapper_pg_lock spinlock
parisc: Check the return value of ioremap() in lba_driver_probe()
parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context
RISC-V: Fixup get incorrect user mode PC for kernel mode regs
RISC-V: Fixup schedule out issue in machine_crash_shutdown()
RISC-V: Add modules to virtual kernel memory layout dump
rtc: rx8025: fix 12/24 hour mode detection on RX-8035
drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
drm/shmem-helper: Add missing vunmap on error
drm/vc4: hdmi: Disable audio if dmas property is present but empty
drm/hyperv-drm: Include framebuffer and EDID headers
drm/nouveau: fix another off-by-one in nvbios_addr
drm/nouveau: Don't pm_runtime_put_sync(), only pm_runtime_put_autosuspend()
drm/nouveau/acpi: Don't print error when we get -EINPROGRESS from pm_runtime
drm/nouveau/kms: Fix failure path for creating DP connectors
drm/amdgpu: Check BO's requested pinning domains against its preferred_domains
drm/amdgpu: fix check in fbdev init
bpf: Fix KASAN use-after-free Read in compute_effective_progs
btrfs: reject log replay if there is unsupported RO compat flag
mtd: rawnand: arasan: Fix clock rate in NV-DDR
mtd: rawnand: arasan: Update NAND bus clock instead of system clock
um: Remove straying parenthesis
um: seed rng using host OS rng
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: light: isl29028: Fix the warning in isl29028_remove()
scsi: sg: Allow waiting for commands to complete on removed device
scsi: qla2xxx: Fix incorrect display of max frame size
scsi: qla2xxx: Zero undefined mailbox IN registers
soundwire: qcom: Check device status before reading devid
ksmbd: fix memory leak in smb2_handle_negotiate
ksmbd: prevent out of bound read for SMB2_TREE_CONNNECT
ksmbd: fix use-after-free bug in smb2_tree_disconect
fuse: limit nsec
fuse: ioctl: translate ENOSYS
serial: mvebu-uart: uart2 error bits clearing
md-raid: destroy the bitmap after destroying the thread
md-raid10: fix KASAN warning
mbcache: don't reclaim used entries
mbcache: add functions to delete entry if unused
media: [PATCH] pci: atomisp_cmd: fix three missing checks on list iterator
ia64, processor: fix -Wincompatible-pointer-types in ia64_get_irr()
PCI: Add defines for normal and subtractive PCI bridges
powerpc/fsl-pci: Fix Class Code of PCIe Root Port
powerpc/ptdump: Fix display of RW pages on FSL_BOOK3E
powerpc/powernv: Avoid crashing if rng is NULL
MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
coresight: Clear the connection field properly
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
USB: HCD: Fix URB giveback issue in tasklet function
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
usb: dwc3: gadget: refactor dwc3_repare_one_trb
usb: dwc3: gadget: fix high speed multiplier setting
netfilter: nf_tables: do not allow SET_ID to refer to another table
netfilter: nf_tables: do not allow CHAIN_ID to refer to another table
netfilter: nf_tables: do not allow RULE_ID to refer to another chain
netfilter: nf_tables: fix null deref due to zeroed list head
epoll: autoremove wakers even more aggressively
x86: Handle idle=nomwait cmdline properly for x86_idle
arch: make TRACE_IRQFLAGS_NMI_SUPPORT generic
arm64: Do not forget syscall when starting a new thread.
arm64: fix oops in concurrently setting insn_emulation sysctls
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
ext2: Add more validity checks for inode counts
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
genirq: Don't return error on missing optional irq_request_resources()
irqchip/mips-gic: Only register IPI domain when SMP is enabled
genirq: GENERIC_IRQ_IPI depends on SMP
sched/core: Always flush pending blk_plug
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
wait: Fix __wait_event_hrtimeout for RT/DL tasks
ARM: dts: imx6ul: add missing properties for sram
ARM: dts: imx6ul: change operating-points to uint32-matrix
ARM: dts: imx6ul: fix keypad compatible
ARM: dts: imx6ul: fix csi node compatible
ARM: dts: imx6ul: fix lcdif node compatible
ARM: dts: imx6ul: fix qspi node compatible
ARM: dts: BCM5301X: Add DT for Meraki MR26
ARM: dts: ux500: Fix Codina accelerometer mounting matrix
ARM: dts: ux500: Fix Gavini accelerometer mounting matrix
spi: synquacer: Add missing clk_disable_unprepare()
ARM: OMAP2+: display: Fix refcount leak bug
ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks
ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk
ACPI: PM: save NVS memory for Lenovo G40-45
ACPI: LPSS: Fix missing check in register_device_clock()
ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
arm64: dts: qcom: ipq8074: fix NAND node name
arm64: dts: allwinner: a64: orangepi-win: Fix LED node name
ARM: shmobile: rcar-gen2: Increase refcount for new reference
firmware: tegra: Fix error check return value of debugfs_create_file()
hwmon: (dell-smm) Add Dell XPS 13 7390 to fan control whitelist
hwmon: (sht15) Fix wrong assumptions in device remove callback
PM: hibernate: defer device probing when resuming from hibernation
selinux: fix memleak in security_read_state_kernel()
selinux: Add boundary check in put_entry()
kasan: test: Silence GCC 12 warnings
drm/amdgpu: Remove one duplicated ef removal
powerpc/64s: Disable stack variable initialisation for prom_init
spi: spi-rspi: Fix PIO fallback on RZ platforms
ARM: findbit: fix overflowing offset
meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init
arm64: dts: renesas: beacon: Fix regulator node names
spi: spi-altera-dfl: Fix an error handling path
ARM: bcm: Fix refcount leak in bcm_kona_smc_init
ACPI: processor/idle: Annotate more functions to live in cpuidle section
ARM: dts: imx7d-colibri-emmc: add cpu1 supply
soc: renesas: r8a779a0-sysc: Fix A2DP1 and A2CV[2357] PDR values
scsi: hisi_sas: Use managed PCI functions
dt-bindings: iio: accel: Add DT binding doc for ADXL355
soc: amlogic: Fix refcount leak in meson-secure-pwrc.c
arm64: dts: renesas: Fix thermal-sensors on single-zone sensors
x86/pmem: Fix platform-device leak in error path
ARM: dts: ast2500-evb: fix board compatible
ARM: dts: ast2600-evb: fix board compatible
ARM: dts: ast2600-evb-a1: fix board compatible
arm64: dts: mt8192: Fix idle-states nodes naming scheme
arm64: dts: mt8192: Fix idle-states entry-method
arm64: select TRACE_IRQFLAGS_NMI_SUPPORT
arm64: cpufeature: Allow different PMU versions in ID_DFR0_EL1
locking/lockdep: Fix lockdep_init_map_*() confusion
arm64: dts: qcom: sc7180: Remove ipa_fw_mem node on trogdor
soc: fsl: guts: machine variable might be unset
block: fix infinite loop for invalid zone append
ARM: dts: qcom: mdm9615: add missing PMIC GPIO reg
ARM: OMAP2+: Fix refcount leak in omapdss_init_of
ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
arm64: dts: qcom: sdm630: disable GPU by default
arm64: dts: qcom: sdm630: fix the qusb2phy ref clock
arm64: dts: qcom: sdm630: fix gpu's interconnect path
arm64: dts: qcom: sdm636-sony-xperia-ganges-mermaid: correct sdc2 pinconf
cpufreq: zynq: Fix refcount leak in zynq_get_revision
regulator: qcom_smd: Fix pm8916_pldo range
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
ARM: dts: qcom: pm8841: add required thermal-sensor-cells
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node
ACPI: APEI: explicit init of HEST and GHES in apci_init()
drivers/iio: Remove all strcpy() uses
ACPI: VIOT: Fix ACS setup
arm64: dts: qcom: sm6125: Move sdc2 pinctrl from seine-pdx201 to sm6125
arm64: dts: qcom: sm6125: Append -state suffix to pinctrl nodes
arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells
arm64: dts: mt7622: fix BPI-R64 WPS button
arm64: tegra: Fixup SYSRAM references
arm64: tegra: Update Tegra234 BPMP channel addresses
arm64: tegra: Mark BPMP channels as no-memory-wc
arm64: tegra: Fix SDMMC1 CD on P2888
erofs: avoid consecutive detection for Highmem memory
blk-mq: don't create hctx debugfs dir until q->debugfs_dir is created
spi: Fix simplification of devm_spi_register_controller
spi: tegra20-slink: fix UAF in tegra_slink_remove()
hwmon: (drivetemp) Add module alias
blktrace: Trace remapped requests correctly
PM: domains: Ensure genpd_debugfs_dir exists before remove
dm writecache: return void from functions
dm writecache: count number of blocks read, not number of read bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks discarded, not number of discard bios
regulator: of: Fix refcount leak bug in of_get_regulation_constraints()
soc: qcom: Make QCOM_RPMPD depend on PM
arm64: dts: qcom: qcs404: Fix incorrect USB2 PHYs assignment
irqdomain: Report irq number for NOMAP domains
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
x86/extable: Fix ex_handler_msr() print condition
selftests/seccomp: Fix compile warning when CC=clang
thermal/tools/tmon: Include pthread and time headers in tmon.h
dm: return early from dm_pr_call() if DM device is suspended
pwm: sifive: Simplify offset calculation for PWMCMP registers
pwm: sifive: Ensure the clk is enabled exactly once per running PWM
pwm: sifive: Shut down hardware only after pwmchip_remove() completed
pwm: lpc18xx-sct: Reduce number of devm memory allocations
pwm: lpc18xx-sct: Simplify driver by not using pwm_[gs]et_chip_data()
pwm: lpc18xx: Fix period handling
drm/dp: Export symbol / kerneldoc fixes for DP AUX bus
drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function
ath10k: do not enforce interrupt trigger type
drm/st7735r: Fix module autoloading for Okaya RH128128T
drm/panel: Fix build error when CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m
wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()
ath11k: fix netdev open race
drm/mipi-dbi: align max_chunk to 2 in spi_transfer
ath11k: Fix incorrect debug_mask mappings
drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers()
drm/mediatek: Modify dsi funcs to atomic operations
drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs
drm/mediatek: Add pull-down MIPI operation in mtk_dsi_poweroff function
drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR
drm/meson: encoder_hdmi: Fix refcount leak in meson_encoder_hdmi_init
drm/bridge: lt9611uxc: Cancel only driver's work
i2c: npcm: Remove own slave addresses 2:10
i2c: npcm: Correct slave role behavior
i2c: mxs: Silence a clang warning
virtio-gpu: fix a missing check to avoid NULL dereference
drm/shmem-helper: Unexport drm_gem_shmem_create_with_handle()
drm/shmem-helper: Export dedicated wrappers for GEM object functions
drm/shmem-helper: Pass GEM shmem object in public interfaces
drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_init
drm: adv7511: override i2c address of cec before accessing it
crypto: sun8i-ss - do not allocate memory when handling hash requests
crypto: sun8i-ss - fix error codes in allocate_flows()
net: fix sk_wmem_schedule() and sk_rmem_schedule() errors
can: netlink: allow configuring of fixed bit rates without need for do_set_bittiming callback
can: netlink: allow configuring of fixed data bit rates without need for do_set_data_bittiming callback
i2c: Fix a potential use after free
crypto: sun8i-ss - fix infinite loop in sun8i_ss_setup_ivs()
media: atmel: atmel-sama7g5-isc: fix warning in configs without OF
media: tw686x: Register the irq at the end of probe
media: imx-jpeg: Correct some definition according specification
media: imx-jpeg: Leave a blank space before the configuration data
media: imx-jpeg: Add pm-runtime support for imx-jpeg
media: imx-jpeg: use NV12M to represent non contiguous NV12
media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos
media: imx-jpeg: Refactor function mxc_jpeg_parse
media: imx-jpeg: Identify and handle precision correctly
media: imx-jpeg: Handle source change in a function
media: imx-jpeg: Support dynamic resolution change
media: imx-jpeg: Align upwards buffer size
media: imx-jpeg: Implement drain using v4l2-mem2mem helpers
ath9k: fix use-after-free in ath9k_hif_usb_rx_cb
wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()
drm/radeon: fix incorrrect SPDX-License-Identifiers
rcutorture: Warn on individual rcu_torture_init() error conditions
rcutorture: Don't cpuhp_remove_state() if cpuhp_setup_state() failed
rcutorture: Fix ksoftirqd boosting timing and iteration
test_bpf: fix incorrect netdev features
crypto: ccp - During shutdown, check SEV data pointer before using
drm: bridge: adv7511: Add check for mipi_dsi_driver_register
media: imx-jpeg: Disable slot interrupt when frame done
drm/mcde: Fix refcount leak in mcde_dsi_bind
media: hdpvr: fix error value returns in hdpvr_read
media: v4l2-mem2mem: prevent pollerr when last_buffer_dequeued is set
media: driver/nxp/imx-jpeg: fix a unexpected return value problem
media: tw686x: Fix memory leak in tw686x_video_init
drm/vc4: plane: Remove subpixel positioning check
drm/vc4: plane: Fix margin calculations for the right/bottom edges
drm/bridge: Add a function to abstract away panels
drm/vc4: dsi: Switch to devm_drm_of_get_bridge
drm/vc4: Use of_device_get_match_data()
drm/vc4: dsi: Release workaround buffer and DMA
drm/vc4: dsi: Correct DSI divider calculations
drm/vc4: dsi: Correct pixel order for DSI0
drm/vc4: dsi: Register dsi0 as the correct vc4 encoder type
drm/vc4: dsi: Fix dsi0 interrupt support
drm/vc4: dsi: Add correct stop condition to vc4_dsi_encoder_disable iteration
drm/vc4: hdmi: Fix HPD GPIO detection
drm/vc4: hdmi: Avoid full hdmi audio fifo writes
drm/vc4: hdmi: Reset HDMI MISC_CONTROL register
drm/vc4: hdmi: Fix timings for interlaced modes
drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes
crypto: arm64/gcm - Select AEAD for GHASH_ARM64_CE
selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0
drm/rockchip: vop: Don't crash for invalid duplicate_state()
drm/rockchip: Fix an error handling path rockchip_dp_probe()
drm/mediatek: dpi: Remove output format of YUV
drm/mediatek: dpi: Only enable dpi after the bridge is enabled
drm: bridge: sii8620: fix possible off-by-one
hinic: Use the bitmap API when applicable
net: hinic: fix bug that ethtool get wrong stats
net: hinic: avoid kernel hung in hinic_get_stats64()
drm/msm/mdp5: Fix global state lock backoff
crypto: hisilicon/sec - don't sleep when in softirq
crypto: hisilicon - Kunpeng916 crypto driver don't sleep when in softirq
media: platform: mtk-mdp: Fix mdp_ipi_comm structure alignment
drm/msm: Avoid dirtyfb stalls on video mode displays (v2)
drm/msm/dpu: Fix for non-visible planes
mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg
mt76: mt7615: do not update pm stats in case of error
ieee80211: add EHT 1K aggregation definitions
mt76: mt7921: fix aggregation subframes setting to HE max
mt76: mt7921: enlarge maximum VHT MPDU length to 11454
mediatek: mt76: mac80211: Fix missing of_node_put() in mt76_led_init()
mediatek: mt76: eeprom: fix missing of_node_put() in mt76_find_power_limits_node()
skmsg: Fix invalid last sg check in sk_msg_recvmsg()
drm/exynos/exynos7_drm_decon: free resources when clk_set_parent() failed.
tcp: make retransmitted SKB fit into the send window
libbpf: Fix the name of a reused map
selftests: timers: valid-adjtimex: build fix for newer toolchains
selftests: timers: clocksource-switch: fix passing errors from child
bpf: Fix subprog names in stack traces.
fs: check FMODE_LSEEK to control internal pipe splicing
media: cedrus: h265: Fix flag name
media: hantro: postproc: Fix motion vector space size
media: hantro: Simplify postprocessor
media: hevc: Embedded indexes in RPS
media: staging: media: hantro: Fix typos
wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()
wifi: p54: Fix an error handling path in p54spi_probe()
wifi: p54: add missing parentheses in p54_flush()
selftests/bpf: fix a test for snprintf() overflow
libbpf: fix an snprintf() overflow check
can: pch_can: do not report txerr and rxerr during bus-off
can: rcar_can: do not report txerr and rxerr during bus-off
can: sja1000: do not report txerr and rxerr during bus-off
can: hi311x: do not report txerr and rxerr during bus-off
can: sun4i_can: do not report txerr and rxerr during bus-off
can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off
can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off
can: usb_8dev: do not report txerr and rxerr during bus-off
can: error: specify the values of data[5..7] of CAN error frames
can: pch_can: pch_can_error(): initialize errc before using it
Bluetooth: hci_intel: Add check for platform_driver_register
i2c: cadence: Support PEC for SMBus block read
i2c: mux-gpmux: Add of_node_put() when breaking out of loop
wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`
wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue
wifi: libertas: Fix possible refcount leak in if_usb_probe()
media: cedrus: hevc: Add check for invalid timestamp
net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version
net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS
net/mlx5: Adjust log_max_qp to be 18 at most
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/sec - fix auth key size error
inet: add READ_ONCE(sk->sk_bound_dev_if) in INET_MATCH()
ipv6: add READ_ONCE(sk->sk_bound_dev_if) in INET6_MATCH()
net: allow unbound socket for packets in VRF when tcp_l3mdev_accept set
netdevsim: fib: Fix reference count leak on route deletion failure
wifi: rtw88: check the return value of alloc_workqueue()
iavf: Fix max_rate limiting
iavf: Fix 'tc qdisc show' listing too many queues
netdevsim: Avoid allocation warnings triggered from user space
net: rose: fix netdev reference changes
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: usb: make USB_RTL8153_ECM non user configurable
wireguard: ratelimiter: use hrtimer in selftest
wireguard: allowedips: don't corrupt stack when detecting overflow
HID: amd_sfh: Don't show client init failed as error when discovery fails
clk: renesas: r9a06g032: Fix UART clkgrp bitsel
mtd: maps: Fix refcount leak in of_flash_probe_versatile
mtd: maps: Fix refcount leak in ap_flash_init
mtd: rawnand: meson: Fix a potential double free issue
of: check previous kernel's ima-kexec-buffer against memory bounds
scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashing
scsi: qla2xxx: edif: Fix potential stuck session in sa update
scsi: qla2xxx: edif: Reduce connection thrash
scsi: qla2xxx: edif: Fix inconsistent check of db_flags
scsi: qla2xxx: edif: Synchronize NPIV deletion with authentication application
scsi: qla2xxx: edif: Add retry for ELS passthrough
scsi: qla2xxx: edif: Fix n2n discovery issue with secure target
scsi: qla2xxx: edif: Fix n2n login retry for secure device
KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"
KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported
phy: samsung: exynosautov9-ufs: correct TSRV register configurations
PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains()
PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep()
HID: cp2112: prevent a buffer overflow in cp2112_xfer()
mtd: sm_ftl: Fix deadlock caused by cancel_work_sync in sm_release
mtd: partitions: Fix refcount leak in parse_redboot_of
mtd: parsers: ofpart: Fix refcount leak in bcm4908_partitions_fw_offset
mtd: st_spi_fsm: Add a clk_disable_unprepare() in .probe()'s error path
PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()
fpga: altera-pr-ip: fix unsigned comparison with less than zero
usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe
usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe
usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()
usb: xhci: tegra: Fix error check
netfilter: xtables: Bring SPDX identifier back
scsi: qla2xxx: edif: Send LOGO for unexpected IKE message
scsi: qla2xxx: edif: Reduce disruption due to multiple app start
scsi: qla2xxx: edif: Fix no login after app start
scsi: qla2xxx: edif: Tear down session if keys have been removed
scsi: qla2xxx: edif: Fix session thrash
scsi: qla2xxx: edif: Fix no logout on delete for N2N
iio: accel: bma400: Fix the scale min and max macro values
platform/chrome: cros_ec: Always expose last resume result
iio: accel: bma400: Reordering of header files
clk: mediatek: reset: Fix written reset bit offset
lib/test_hmm: avoid accessing uninitialized pages
memremap: remove support for external pgmap refcounts
mm/memremap: fix memunmap_pages() race with get_dev_pagemap()
KVM: Don't set Accessed/Dirty bits for ZERO_PAGE
mwifiex: Ignore BTCOEX events from the 88W8897 firmware
mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv
scsi: iscsi: Allow iscsi_if_stop_conn() to be called from kernel
scsi: iscsi: Add helper to remove a session from the kernel
scsi: iscsi: Fix session removal on shutdown
dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
mtd: dataflash: Add SPI ID table
clk: qcom: camcc-sm8250: Fix halt on boot by reducing driver's init level
misc: rtsx: Fix an error handling path in rtsx_pci_probe()
driver core: fix potential deadlock in __driver_attach
clk: qcom: clk-krait: unlock spin after mux completion
clk: qcom: gcc-msm8939: Add missing SYSTEM_MM_NOC_BFDCD_CLK_SRC
clk: qcom: gcc-msm8939: Fix bimc_ddr_clk_src rcgr base address
clk: qcom: gcc-msm8939: Add missing system_mm_noc_bfdcd_clk_src
clk: qcom: gcc-msm8939: Point MM peripherals to system_mm_noc clock
usb: host: xhci: use snprintf() in xhci_decode_trb()
RDMA/rxe: Fix deadlock in rxe_do_local_ops()
clk: qcom: ipq8074: fix NSS core PLL-s
clk: qcom: ipq8074: SW workaround for UBI32 PLL lock
clk: qcom: ipq8074: fix NSS port frequency tables
clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocks
clk: qcom: camcc-sdm845: Fix topology around titan_top power domain
clk: qcom: camcc-sm8250: Fix topology around titan_top power domain
clk: qcom: clk-rcg2: Fail Duty-Cycle configuration if MND divider is not enabled.
clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register
mm/mempolicy: fix get_nodes out of bound access
PCI: dwc: Stop link on host_init errors and de-initialization
PCI: dwc: Add unroll iATU space support to dw_pcie_disable_atu()
PCI: dwc: Disable outbound windows only for controllers using iATU
PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address
PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors
PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists
soundwire: bus_type: fix remove and shutdown support
soundwire: revisit driver bind/unbind and callbacks
KVM: arm64: Don't return from void function
dmaengine: sf-pdma: Add multithread support for a DMA channel
PCI: endpoint: Don't stop controller when unbinding endpoint function
scsi: qla2xxx: Check correct variable in qla24xx_async_gffid()
intel_th: Fix a resource leak in an error handling path
intel_th: msu-sink: Potential dereference of null pointer
intel_th: msu: Fix vmalloced buffers
binder: fix redefinition of seq_file attributes
staging: rtl8192u: Fix sleep in atomic context bug in dm_fsync_timer_callback
mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switch
mmc: mxcmmc: Silence a clang warning
mmc: renesas_sdhi: Get the reset handle early in the probe
memstick/ms_block: Fix some incorrect memory allocation
memstick/ms_block: Fix a memory leak
mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
of: device: Fix missing of_node_put() in of_dma_set_restricted_buffer
mmc: block: Add single read for 4k sector cards
KVM: s390: pv: leak the topmost page table when destroy fails
PCI/portdrv: Don't disable AER reporting in get_port_device_capability()
PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks
scsi: smartpqi: Fix DMA direction for RAID requests
xtensa: iss/network: provide release() callback
xtensa: iss: fix handling error cases in iss_net_configure()
usb: gadget: udc: amd5536 depends on HAS_DMA
usb: aspeed-vhub: Fix refcount leak bug in ast_vhub_init_desc()
usb: dwc3: core: Deprecate GCTL.CORESOFTRESET
usb: dwc3: core: Do not perform GCTL_CORE_SOFTRESET during bootup
usb: dwc3: qcom: fix missing optional irq warnings
eeprom: idt_89hpesx: uninitialized data in idt_dbgfs_csr_write()
phy: stm32: fix error return in stm32_usbphyc_phy_init
interconnect: imx: fix max_node_id
um: random: Don't initialise hwrng struct with zero
RDMA/irdma: Fix a window for use-after-free
RDMA/irdma: Fix VLAN connection with wildcard address
RDMA/irdma: Fix setting of QP context err_rq_idx_valid field
RDMA/rtrs-srv: Fix modinfo output for stringify
RDMA/rtrs: Fix warning when use poll mode on client side.
RDMA/rtrs: Replace duplicate check with is_pollqueue helper
RDMA/rtrs: Introduce destroy_cq helper
RDMA/rtrs: Do not allow sessname to contain special symbols / and .
RDMA/rtrs: Rename rtrs_sess to rtrs_path
RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path
RDMA/rtrs-clt: Rename rtrs_clt_sess to rtrs_clt_path
RDMA/rtrs-clt: Replace list_next_or_null_rr_rcu with an inline function
RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr()
RDMA/hns: Fix incorrect clearing of interrupt status register
RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event
iio: cros: Register FIFO callback after sensor is registered
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
RDMA/hfi1: fix potential memory leak in setup_base_ctxt()
gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()
HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()
HID: amd_sfh: Add NULL check for hid device
dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)
scripts/gdb: lx-dmesg: read records individually
scripts/gdb: fix 'lx-dmesg' on 32 bits arch
RDMA/rxe: Fix mw bind to allow any consumer key portion
mmc: cavium-octeon: Add of_node_put() when breaking out of loop
mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
HID: alps: Declare U1_UNICORN_LEGACY support
RDMA/rxe: For invalidate compare according to set keys in mr
PCI: tegra194: Fix Root Port interrupt handling
PCI: tegra194: Fix link up retry sequence
HID: amd_sfh: Handle condition of "no sensors"
USB: serial: fix tty-port initialized comments
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
KVM: nVMX: Set UMIP bit CR4_FIXED1 MSR when emulating UMIP
platform/olpc: Fix uninitialized data in debugfs write
RDMA/srpt: Duplicate port name members
RDMA/srpt: Introduce a reference count in struct srpt_device
RDMA/srpt: Fix a use-after-free
android: binder: stop saving a pointer to the VMA
mm/mmap.c: fix missing call to vm_unacct_memory in mmap_region
selftests: kvm: set rax before vmcall
of/fdt: declared return type does not match actual return type
RDMA/mlx5: Add missing check for return value in get namespace flow
RDMA/rxe: Add memory barriers to kernel queues
RDMA/rxe: Remove the is_user members of struct rxe_sq/rxe_rq/rxe_srq
RDMA/rxe: Fix error unwind in rxe_create_qp()
block/rnbd-srv: Set keep_id to true after mutex_trylock
null_blk: fix ida error handling in null_add_dev()
nvme: use command_id instead of req->tag in trace_nvme_complete_rq()
nvme: define compat_ioctl again to unbreak 32-bit userspace.
nvme: disable namespace access for unsupported metadata
nvme: don't return an error from nvme_configure_metadata
nvme: catch -ENODEV from nvme_revalidate_zones again
block/bio: remove duplicate append pages code
block: ensure iov_iter advances for added pages
jbd2: fix outstanding credits assert in jbd2_journal_commit_transaction()
ext4: recover csum seed of tmp_inode after migrating to extents
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
usb: cdns3: Don't use priv_dev uninitialized in cdns3_gadget_ep_enable()
opp: Fix error check in dev_pm_opp_attach_genpd()
ASoC: cros_ec_codec: Fix refcount leak in cros_ec_codec_platform_probe
ASoC: samsung: Fix error handling in aries_audio_probe
ASoC: imx-audmux: Silence a clang warning
ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe
ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe
ASoC: codecs: da7210: add check for i2c_add_driver
ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe
serial: 8250: Export ICR access helpers for internal use
serial: 8250: dma: Allow driver operations before starting DMA transfers
serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty()
ASoC: codecs: msm8916-wcd-digital: move gains from SX_TLV to S8_TLV
ASoC: codecs: wcd9335: move gains from SX_TLV to S8_TLV
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
rpmsg: mtk_rpmsg: Fix circular locking dependency
remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_init
selftests/livepatch: better synchronize test_klp_callbacks_busy
profiling: fix shift too large makes kernel panic
remoteproc: imx_rproc: Fix refcount leak in imx_rproc_addr_init
ASoC: samsung: h1940_uda1380: include proepr GPIO consumer header
powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable
ASoC: samsung: change gpiod_speaker_power and rx1950_audio from global to static variables
tty: n_gsm: Delete gsmtty open SABM frame when config requester
tty: n_gsm: fix user open not possible at responder until initiator open
tty: n_gsm: fix tty registration before control channel open
tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output()
tty: n_gsm: fix missing timer to handle stalled links
tty: n_gsm: fix non flow control frames during mux flow off
tty: n_gsm: fix packet re-transmission without open control channel
tty: n_gsm: fix race condition in gsmld_write()
tty: n_gsm: fix resource allocation order in gsm_activate_mux()
ASoC: qcom: Fix missing of_node_put() in asoc_qcom_lpass_cpu_platform_probe()
ASoC: imx-card: Fix DSD/PDM mclk frequency
remoteproc: qcom: wcnss: Fix handling of IRQs
vfio/ccw: Do not change FSM state in subchannel event
serial: 8250_fsl: Don't report FE, PE and OE twice
tty: n_gsm: fix wrong T1 retry count handling
tty: n_gsm: fix DM command
tty: n_gsm: fix missing corner cases in gsmld_poll()
MIPS: vdso: Utilize __pa() for gic_pfn
swiotlb: fail map correctly with failed io_tlb_default_mem
ASoC: mt6359: Fix refcount leak bug
serial: 8250_bcm7271: Save/restore RTS in suspend/resume
iommu/exynos: Handle failed IOMMU device registration properly
9p: fix a bunch of checkpatch warnings
9p: Drop kref usage
9p: Add client parameter to p9_req_put()
net: 9p: fix refcount leak in p9_read_work() error handling
MIPS: Fixed __debug_virt_addr_valid()
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
kfifo: fix kfifo_to_user() return type
lib/smp_processor_id: fix imbalanced instrumentation_end() call
proc: fix a dentry lock race between release_task and lookup
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: sysmon: Wait for SSCTL service to come up
mfd: t7l66xb: Drop platform disable callback
mfd: max77620: Fix refcount leak in max77620_initialise_fps
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
perf tools: Fix dso_id inode generation comparison
s390/dump: fix old lowcore virtual vs physical address confusion
s390/maccess: fix semantics of memcpy_real() and its callers
s390/crash: fix incorrect number of bytes to copy to user space
s390/zcore: fix race when reading from hardware system area
ASoC: fsl_asrc: force cast the asrc_format type
ASoC: fsl-asoc-card: force cast the asrc_format type
ASoC: fsl_easrc: use snd_pcm_format_t type for sample_format
ASoC: imx-card: use snd_pcm_format_t type for asrc_format
ASoC: qcom: q6dsp: Fix an off-by-one in q6adm_alloc_copp()
fuse: Remove the control interface for virtio-fs
ASoC: audio-graph-card: Add of_node_put() in fail path
watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource
watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()
video: fbdev: amba-clcd: Fix refcount leak bugs
video: fbdev: sis: fix typos in SiS_GetModeID()
ASoC: mchp-spdifrx: disable end of block interrupt on failures
powerpc/32: Call mmu_mark_initmem_nx() regardless of data block mapping.
powerpc/32: Do not allow selection of e5500 or e6500 CPUs on PPC32
powerpc/iommu: Fix iommu_table_in_use for a small default DMA window case
powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias
tty: serial: fsl_lpuart: correct the count of break characters
s390/dump: fix os_info virtual vs physical address confusion
s390/smp: cleanup target CPU callback starting
s390/smp: cleanup control register update routines
s390/maccess: rework absolute lowcore accessors
s390/smp: enforce lowcore protection on CPU restart
f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
perf symbol: Fail to read phdr workaround
kprobes: Forbid probing on trampoline and BPF code areas
x86/bus_lock: Don't assume the init value of DEBUGCTLMSR.BUS_LOCK_DETECT to be zero
powerpc/pci: Fix PHB numbering when using opal-phbid
genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO
scripts/faddr2line: Fix vmlinux detection on arm64
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed
x86/numa: Use cpumask_available instead of hardcoded NULL check
video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
tools/thermal: Fix possible path truncations
sched: Fix the check of nr_running at queue wakelist
sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle
sched/core: Do not requeue task on CPU excluded from cpus_mask
x86/entry: Build thunk_$(BITS) only if CONFIG_PREEMPTION=y
f2fs: allow compression for mmap files in compress_mode=user
f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED
video: fbdev: vt8623fb: Check the size of screen before memset_io()
video: fbdev: arkfb: Check the size of screen before memset_io()
video: fbdev: s3fb: Check the size of screen before memset_io()
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: qla2xxx: Fix imbalance vha->vref_count
scsi: qla2xxx: Fix discovery issues in FC-AL topology
scsi: qla2xxx: Turn off multi-queue for 8G adapters
scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts
scsi: qla2xxx: Fix excessive I/O error messages by default
scsi: qla2xxx: Fix erroneous mailbox timeout after PCI error injection
scsi: qla2xxx: Wind down adapter after PCIe error
scsi: qla2xxx: Fix losing FCP-2 targets on long port disable with I/Os
scsi: qla2xxx: Fix losing target when it reappears during delete
scsi: qla2xxx: Fix losing FCP-2 targets during port perturbation tests
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
ftrace/x86: Add back ftrace_expected assignment
x86/kprobes: Update kcb status flag after singlestepping
x86/olpc: fix 'logical not is only applied to the left hand side'
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
Input: gscps2 - check return value of ioremap() in gscps2_probe()
__follow_mount_rcu(): verify that mount_lock remains unchanged
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
drm/mediatek: Allow commands to be sent during video mode
drm/mediatek: Keep dsi as LP00 before dcs cmds transfer
crypto: blake2s - remove shash module
drm/dp/mst: Read the extended DPCD capabilities during system resume
drm/vc4: drv: Adopt the dma configuration from the HVS or V3D component
usbnet: smsc95xx: Don't clear read-only PHY interrupt
usbnet: smsc95xx: Avoid link settings race on interrupt reception
usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling
usbnet: smsc95xx: Fix deadlock on runtime resume
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
scsi: lpfc: Fix EEH support for NVMe I/O
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: Remove extra atomic_inc on cmd_pending in queuecommand after VMID
intel_th: pci: Add Meteor Lake-P support
intel_th: pci: Add Raptor Lake-S PCH support
intel_th: pci: Add Raptor Lake-S CPU support
KVM: set_msr_mce: Permit guests to ignore single-bit ECC errors
KVM: x86: Signal #GP, not -EPERM, on bad WRMSR(MCi_CTL/STATUS)
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
PCI/AER: Iterate over error counters instead of error strings
PCI: qcom: Power on PHY before IPQ8074 DBI register accesses
serial: 8250_pci: Refactor the loop in pci_ite887x_init()
serial: 8250_pci: Replace dev_*() by pci_*() macros
serial: 8250: Fold EndRun device support into OxSemi Tornado code
serial: 8250: Add proper clock handling for OxSemi PCIe devices
tty: 8250: Add support for Brainboxes PX cards.
dm writecache: set a default MAX_WRITEBACK_JOBS
kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
net/9p: Initialize the iounit field during fid creation
ARM: remove some dead code
timekeeping: contribute wall clock to rng on time change
locking/csd_lock: Change csdlock_debug from early_param to __setup
block: remove the struct blk_queue_ctx forward declaration
block: don't allow the same type rq_qos add more than once
btrfs: ensure pages are unlocked on cow_file_range() failure
btrfs: reset block group chunk force if we have to wait
btrfs: properly flag filesystem with BTRFS_FEATURE_INCOMPAT_BIG_METADATA
ACPI: CPPC: Do not prevent CPPC from working in the future
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
KVM: x86/pmu: Introduce the ctrl_mask value for fixed counter
KVM: VMX: Mark all PERF_GLOBAL_(OVF)_CTRL bits reserved if there's no vPMU
KVM: x86/pmu: Ignore pmu->global_ctrl check if vPMU doesn't support global_ctrl
KVM: VMX: Add helper to check if the guest PMU has PERF_GLOBAL_CTRL
KVM: nVMX: Attempt to load PERF_GLOBAL_CTRL on nVMX xfer iff it exists
dm raid: fix address sanitizer warning in raid_status
dm raid: fix address sanitizer warning in raid_resume
tracing: Add '__rel_loc' using trace event macros
tracing: Avoid -Warray-bounds warning for __rel_loc macro
ext4: update s_overhead_clusters in the superblock during an on-line resize
ext4: fix extent status tree race in writeback error recovery path
ext4: add EXT4_INODE_HAS_XATTR_SPACE macro in xattr.h
ext4: fix use-after-free in ext4_xattr_set_entry
ext4: correct max_inline_xattr_value_size computing
ext4: correct the misjudgment in ext4_iget_extra_inode
ext4: fix warning in ext4_iomap_begin as race between bmap and write
ext4: check if directory block is within i_size
ext4: make sure ext4_append() always allocates new block
ext4: remove EA inode entry from mbcache on inode eviction
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: fix race when reusing xattr blocks
KEYS: asymmetric: enforce SM2 signature use pkey algo
tpm: eventlog: Fix section mismatch for DEBUG_SECTION_MISMATCH
xen-blkback: fix persistent grants negotiation
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkfront: Apply 'feature_persistent' parameter when connect
powerpc: Fix eh field when calling lwarx on PPC32
tracing: Use a struct alignof to determine trace event field alignment
net_sched: cls_route: remove from list when handle is 0
mac80211: fix a memory leak where sta_info is not freed
tcp: fix over estimation in sk_forced_mem_schedule()
crypto: lib/blake2s - reduce stack frame usage in self test
Revert "mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv"
Revert "s390/smp: enforce lowcore protection on CPU restart"
drm/bridge: tc358767: Fix (e)DP bridge endpoint parsing in dedicated function
net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode
drm/vc4: change vc4_dma_range_matches from a global to static
tracing/perf: Avoid -Warray-bounds warning for __rel_loc macro
drm/msm: Fix dirtyfb refcounting
drm/meson: Fix refcount leak in meson_encoder_hdmi_init
io_uring: mem-account pbuf buckets
Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP"
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression
drm/bridge: Move devm_drm_of_get_bridge to bridge/panel.c
scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()
scsi: lpfc: Fix element offset in __lpfc_sli_release_iocbq_s4()
scsi: lpfc: Resolve some cleanup issues following SLI path refactoring
Linux 5.15.61
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iec359ed301bcbcd6e19b67ee8534418fab26850b
This commit is contained in:
Greg Kroah-Hartman
@@ -42,5 +42,5 @@ KernelVersion: 5.10
|
||||
Contact: SeongJae Park <sjpark@amazon.de>
|
||||
Description:
|
||||
Whether to enable the persistent grants feature or not. Note
|
||||
that this option only takes effect on newly created backends.
|
||||
that this option only takes effect on newly connected backends.
|
||||
The default is Y (enable).
|
||||
|
||||
@@ -15,5 +15,5 @@ KernelVersion: 5.10
|
||||
Contact: SeongJae Park <sjpark@amazon.de>
|
||||
Description:
|
||||
Whether to enable the persistent grants feature or not. Note
|
||||
that this option only takes effect on newly created frontends.
|
||||
that this option only takes effect on newly connected frontends.
|
||||
The default is Y (enable).
|
||||
|
||||
@@ -78,16 +78,16 @@ Status:
|
||||
2. the number of blocks
|
||||
3. the number of free blocks
|
||||
4. the number of blocks under writeback
|
||||
5. the number of read requests
|
||||
6. the number of read requests that hit the cache
|
||||
7. the number of write requests
|
||||
8. the number of write requests that hit uncommitted block
|
||||
9. the number of write requests that hit committed block
|
||||
10. the number of write requests that bypass the cache
|
||||
11. the number of write requests that are allocated in the cache
|
||||
5. the number of read blocks
|
||||
6. the number of read blocks that hit the cache
|
||||
7. the number of write blocks
|
||||
8. the number of write blocks that hit uncommitted block
|
||||
9. the number of write blocks that hit committed block
|
||||
10. the number of write blocks that bypass the cache
|
||||
11. the number of write blocks that are allocated in the cache
|
||||
12. the number of write requests that are blocked on the freelist
|
||||
13. the number of flush requests
|
||||
14. the number of discard requests
|
||||
14. the number of discarded blocks
|
||||
|
||||
Messages:
|
||||
flush
|
||||
|
||||
@@ -5000,20 +5000,33 @@
|
||||
Speculative Code Execution with Return Instructions)
|
||||
vulnerability.
|
||||
|
||||
AMD-based UNRET and IBPB mitigations alone do not stop
|
||||
sibling threads from influencing the predictions of other
|
||||
sibling threads. For that reason, STIBP is used on pro-
|
||||
cessors that support it, and mitigate SMT on processors
|
||||
that don't.
|
||||
|
||||
off - no mitigation
|
||||
auto - automatically select a migitation
|
||||
auto,nosmt - automatically select a mitigation,
|
||||
disabling SMT if necessary for
|
||||
the full mitigation (only on Zen1
|
||||
and older without STIBP).
|
||||
ibpb - mitigate short speculation windows on
|
||||
basic block boundaries too. Safe, highest
|
||||
perf impact.
|
||||
unret - force enable untrained return thunks,
|
||||
only effective on AMD f15h-f17h
|
||||
based systems.
|
||||
unret,nosmt - like unret, will disable SMT when STIBP
|
||||
is not available.
|
||||
ibpb - On AMD, mitigate short speculation
|
||||
windows on basic block boundaries too.
|
||||
Safe, highest perf impact. It also
|
||||
enables STIBP if present. Not suitable
|
||||
on Intel.
|
||||
ibpb,nosmt - Like "ibpb" above but will disable SMT
|
||||
when STIBP is not available. This is
|
||||
the alternative for systems which do not
|
||||
have STIBP.
|
||||
unret - Force enable untrained return thunks,
|
||||
only effective on AMD f15h-f17h based
|
||||
systems.
|
||||
unret,nosmt - Like unret, but will disable SMT when STIBP
|
||||
is not available. This is the alternative for
|
||||
systems which do not have STIBP.
|
||||
|
||||
Selecting 'auto' will choose a mitigation method at run
|
||||
time according to the CPU.
|
||||
|
||||
@@ -612,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
|
||||
by default this way, for example.
|
||||
|
||||
The other kernel command line parameters controlling CPU idle time management
|
||||
described below are only relevant for the *x86* architecture and some of
|
||||
them affect Intel processors only.
|
||||
described below are only relevant for the *x86* architecture and references
|
||||
to ``intel_idle`` affect Intel processors only.
|
||||
|
||||
The *x86* architecture support code recognizes three kernel command line
|
||||
options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
|
||||
@@ -635,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as
|
||||
energy-efficiency. Thus using it for performance reasons may not be a good idea
|
||||
at all.]
|
||||
|
||||
The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
|
||||
``acpi_idle`` to be used (as long as all of the information needed by it is
|
||||
there in the system's ACPI tables), but it is not allowed to use the
|
||||
``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
|
||||
The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
|
||||
the CPU to enter idle states. When this option is used, the ``acpi_idle``
|
||||
driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
|
||||
running Intel processors, this option disables the ``intel_idle`` driver
|
||||
and forces the use of the ``acpi_idle`` driver instead. Note that in either
|
||||
case, ``acpi_idle`` driver will function only if all the information needed
|
||||
by it is in the system's ACPI tables.
|
||||
|
||||
In addition to the architecture-level kernel command line options affecting CPU
|
||||
idle time management, there are parameters affecting individual ``CPUIdle``
|
||||
|
||||
88
Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
Normal file
88
Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
Normal file
@@ -0,0 +1,88 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
|
||||
|
||||
maintainers:
|
||||
- Puranjay Mohan <puranjay12@gmail.com>
|
||||
|
||||
description: |
|
||||
Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
|
||||
both I2C & SPI interfaces
|
||||
https://www.analog.com/en/products/adxl355.html
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- adi,adxl355
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
description: |
|
||||
Type for DRDY should be IRQ_TYPE_EDGE_RISING.
|
||||
Three configurable interrupt lines exist.
|
||||
|
||||
interrupt-names:
|
||||
description: Specify which interrupt line is in use.
|
||||
items:
|
||||
enum:
|
||||
- INT1
|
||||
- INT2
|
||||
- DRDY
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
|
||||
vdd-supply:
|
||||
description: Regulator that provides power to the sensor
|
||||
|
||||
vddio-supply:
|
||||
description: Regulator that provides power to the bus
|
||||
|
||||
spi-max-frequency: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Example for a I2C device node */
|
||||
accelerometer@1d {
|
||||
compatible = "adi,adxl355";
|
||||
reg = <0x1d>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "DRDY";
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
accelerometer@0 {
|
||||
compatible = "adi,adxl355";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "DRDY";
|
||||
};
|
||||
};
|
||||
@@ -47,7 +47,7 @@ properties:
|
||||
const: 2
|
||||
|
||||
cache-sets:
|
||||
const: 1024
|
||||
enum: [1024, 2048]
|
||||
|
||||
cache-size:
|
||||
const: 2097152
|
||||
@@ -85,6 +85,8 @@ then:
|
||||
description: |
|
||||
Must contain entries for DirError, DataError and DataFail signals.
|
||||
maxItems: 3
|
||||
cache-sets:
|
||||
const: 1024
|
||||
|
||||
else:
|
||||
properties:
|
||||
@@ -92,6 +94,8 @@ else:
|
||||
description: |
|
||||
Must contain entries for DirError, DataError, DataFail, DirFail signals.
|
||||
minItems: 4
|
||||
cache-sets:
|
||||
const: 2048
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
|
||||
129
Documentation/tty/device_drivers/oxsemi-tornado.rst
Normal file
129
Documentation/tty/device_drivers/oxsemi-tornado.rst
Normal file
@@ -0,0 +1,129 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
====================================================================
|
||||
Notes on Oxford Semiconductor PCIe (Tornado) 950 serial port devices
|
||||
====================================================================
|
||||
|
||||
Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven
|
||||
by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.
|
||||
|
||||
The baud rate produced by the baud generator is obtained from this input
|
||||
frequency by dividing it by the clock prescaler, which can be set to any
|
||||
value from 1 to 63.875 in increments of 0.125, and then the usual 16-bit
|
||||
divisor is used as with the original 8250, to divide the frequency by a
|
||||
value from 1 to 65535. Finally a programmable oversampling rate is used
|
||||
that can take any value from 4 to 16 to divide the frequency further and
|
||||
determine the actual baud rate used. Baud rates from 15625000bps down
|
||||
to 0.933bps can be obtained this way.
|
||||
|
||||
By default the oversampling rate is set to 16 and the clock prescaler is
|
||||
set to 33.875, meaning that the frequency to be used as the reference
|
||||
for the usual 16-bit divisor is 115313.653, which is close enough to the
|
||||
frequency of 115200 used by the original 8250 for the same values to be
|
||||
used for the divisor to obtain the requested baud rates by software that
|
||||
is unaware of the extra clock controls available.
|
||||
|
||||
The oversampling rate is programmed with the TCR register and the clock
|
||||
prescaler is programmed with the CPR/CPR2 register pair[1][2][3][4].
|
||||
To switch away from the default value of 33.875 for the prescaler the
|
||||
the enhanced mode has to be explicitly enabled though, by setting bit 4
|
||||
of the EFR. In that mode setting bit 7 in the MCR enables the prescaler
|
||||
or otherwise it is bypassed as if the value of 1 was used. Additionally
|
||||
writing any value to CPR clears CPR2 for compatibility with old software
|
||||
written for older conventional PCI Oxford Semiconductor devices that do
|
||||
not have the extra prescaler's 9th bit in CPR2, so the CPR/CPR2 register
|
||||
pair has to be programmed in the right order.
|
||||
|
||||
By using these parameters rates from 15625000bps down to 1bps can be
|
||||
obtained, with either exact or highly-accurate actual bit rates for
|
||||
standard and many non-standard rates.
|
||||
|
||||
Here are the figures for the standard and some non-standard baud rates
|
||||
(including those quoted in Oxford Semiconductor documentation), giving
|
||||
the requested rate (r), the actual rate yielded (a) and its deviation
|
||||
from the requested rate (d), and the values of the oversampling rate
|
||||
(tcr), the clock prescaler (cpr) and the divisor (div) produced by the
|
||||
new `get_divisor' handler:
|
||||
|
||||
r: 15625000, a: 15625000.00, d: 0.0000%, tcr: 4, cpr: 1.000, div: 1
|
||||
r: 12500000, a: 12500000.00, d: 0.0000%, tcr: 5, cpr: 1.000, div: 1
|
||||
r: 10416666, a: 10416666.67, d: 0.0000%, tcr: 6, cpr: 1.000, div: 1
|
||||
r: 8928571, a: 8928571.43, d: 0.0000%, tcr: 7, cpr: 1.000, div: 1
|
||||
r: 7812500, a: 7812500.00, d: 0.0000%, tcr: 8, cpr: 1.000, div: 1
|
||||
r: 4000000, a: 4000000.00, d: 0.0000%, tcr: 5, cpr: 3.125, div: 1
|
||||
r: 3686400, a: 3676470.59, d: -0.2694%, tcr: 8, cpr: 2.125, div: 1
|
||||
r: 3500000, a: 3496503.50, d: -0.0999%, tcr: 13, cpr: 1.375, div: 1
|
||||
r: 3000000, a: 2976190.48, d: -0.7937%, tcr: 14, cpr: 1.500, div: 1
|
||||
r: 2500000, a: 2500000.00, d: 0.0000%, tcr: 10, cpr: 2.500, div: 1
|
||||
r: 2000000, a: 2000000.00, d: 0.0000%, tcr: 10, cpr: 3.125, div: 1
|
||||
r: 1843200, a: 1838235.29, d: -0.2694%, tcr: 16, cpr: 2.125, div: 1
|
||||
r: 1500000, a: 1492537.31, d: -0.4975%, tcr: 5, cpr: 8.375, div: 1
|
||||
r: 1152000, a: 1152073.73, d: 0.0064%, tcr: 14, cpr: 3.875, div: 1
|
||||
r: 921600, a: 919117.65, d: -0.2694%, tcr: 16, cpr: 2.125, div: 2
|
||||
r: 576000, a: 576036.87, d: 0.0064%, tcr: 14, cpr: 3.875, div: 2
|
||||
r: 460800, a: 460829.49, d: 0.0064%, tcr: 7, cpr: 3.875, div: 5
|
||||
r: 230400, a: 230414.75, d: 0.0064%, tcr: 14, cpr: 3.875, div: 5
|
||||
r: 115200, a: 115207.37, d: 0.0064%, tcr: 14, cpr: 1.250, div: 31
|
||||
r: 57600, a: 57603.69, d: 0.0064%, tcr: 8, cpr: 3.875, div: 35
|
||||
r: 38400, a: 38402.46, d: 0.0064%, tcr: 14, cpr: 3.875, div: 30
|
||||
r: 19200, a: 19201.23, d: 0.0064%, tcr: 8, cpr: 3.875, div: 105
|
||||
r: 9600, a: 9600.06, d: 0.0006%, tcr: 9, cpr: 1.125, div: 643
|
||||
r: 4800, a: 4799.98, d: -0.0004%, tcr: 7, cpr: 2.875, div: 647
|
||||
r: 2400, a: 2400.02, d: 0.0008%, tcr: 9, cpr: 2.250, div: 1286
|
||||
r: 1200, a: 1200.00, d: 0.0000%, tcr: 14, cpr: 2.875, div: 1294
|
||||
r: 300, a: 300.00, d: 0.0000%, tcr: 11, cpr: 2.625, div: 7215
|
||||
r: 200, a: 200.00, d: 0.0000%, tcr: 16, cpr: 1.250, div: 15625
|
||||
r: 150, a: 150.00, d: 0.0000%, tcr: 13, cpr: 2.250, div: 14245
|
||||
r: 134, a: 134.00, d: 0.0000%, tcr: 11, cpr: 2.625, div: 16153
|
||||
r: 110, a: 110.00, d: 0.0000%, tcr: 12, cpr: 1.000, div: 47348
|
||||
r: 75, a: 75.00, d: 0.0000%, tcr: 4, cpr: 5.875, div: 35461
|
||||
r: 50, a: 50.00, d: 0.0000%, tcr: 16, cpr: 1.250, div: 62500
|
||||
r: 25, a: 25.00, d: 0.0000%, tcr: 16, cpr: 2.500, div: 62500
|
||||
r: 4, a: 4.00, d: 0.0000%, tcr: 16, cpr: 20.000, div: 48828
|
||||
r: 2, a: 2.00, d: 0.0000%, tcr: 16, cpr: 40.000, div: 48828
|
||||
r: 1, a: 1.00, d: 0.0000%, tcr: 16, cpr: 63.875, div: 61154
|
||||
|
||||
With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX
|
||||
limitation imposed by `serial8250_get_baud_rate' standard baud rates
|
||||
below 300bps become unavailable in the regular way, e.g. the rate of
|
||||
200bps requires the baud base to be divided by 78125 and that is beyond
|
||||
the unsigned 16-bit range. The historic spd_cust feature can still be
|
||||
used by encoding the values for, the prescaler, the oversampling rate
|
||||
and the clock divisor (DLM/DLL) as follows to obtain such rates if so
|
||||
required:
|
||||
|
||||
31 29 28 20 19 16 15 0
|
||||
+-----+-----------------+-------+-------------------------------+
|
||||
|0 0 0| CPR2:CPR | TCR | DLM:DLL |
|
||||
+-----+-----------------+-------+-------------------------------+
|
||||
|
||||
Use a value such encoded for the `custom_divisor' field along with the
|
||||
ASYNC_SPD_CUST flag set in the `flags' field in `struct serial_struct'
|
||||
passed with the TIOCSSERIAL ioctl(2), such as with the setserial(8)
|
||||
utility and its `divisor' and `spd_cust' parameters, and the select
|
||||
the baud rate of 38400bps. Note that the value of 0 in TCR sets the
|
||||
oversampling rate to 16 and prescaler values below 1 in CPR2/CPR are
|
||||
clamped by the driver to 1.
|
||||
|
||||
For example the value of 0x1f4004e2 will set CPR2/CPR, TCR and DLM/DLL
|
||||
respectively to 0x1f4, 0x0 and 0x04e2, choosing the prescaler value,
|
||||
the oversampling rate and the clock divisor of 62.500, 16 and 1250
|
||||
respectively. These parameters will set the baud rate for the serial
|
||||
port to 62500000 / 62.500 / 1250 / 16 = 50bps.
|
||||
|
||||
References:
|
||||
|
||||
[1] "OXPCIe200 PCI Express Multi-Port Bridge", Oxford Semiconductor,
|
||||
Inc., DS-0045, 10 Nov 2008, Section "950 Mode", pp. 64-65
|
||||
|
||||
[2] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port",
|
||||
Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Section "950 Mode",
|
||||
p. 20
|
||||
|
||||
[3] "OXPCIe954 PCI Express Bridge to Quad Serial Port", Oxford
|
||||
Semiconductor, Inc., DS-0047, Feb 08, Section "950 Mode", p. 20
|
||||
|
||||
[4] "OXPCIe958 PCI Express Bridge to Octal Serial Port", Oxford
|
||||
Semiconductor, Inc., DS-0048, Feb 08, Section "950 Mode", p. 20
|
||||
|
||||
Maciej W. Rozycki <macro@orcam.me.uk>
|
||||
@@ -3326,15 +3326,15 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
|
||||
* - __u8
|
||||
- ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
|
||||
- PocStCurrBefore as described in section 8.3.2 "Decoding process for reference
|
||||
picture set.
|
||||
picture set": provides the index of the short term before references in DPB array.
|
||||
* - __u8
|
||||
- ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
|
||||
- PocStCurrAfter as described in section 8.3.2 "Decoding process for reference
|
||||
picture set.
|
||||
picture set": provides the index of the short term after references in DPB array.
|
||||
* - __u8
|
||||
- ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
|
||||
- PocLtCurr as described in section 8.3.2 "Decoding process for reference
|
||||
picture set.
|
||||
picture set": provides the index of the long term references in DPB array.
|
||||
* - __u64
|
||||
- ``flags``
|
||||
- See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
|
||||
|
||||
7
Makefile
7
Makefile
@@ -1,7 +1,7 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
VERSION = 5
|
||||
PATCHLEVEL = 15
|
||||
SUBLEVEL = 60
|
||||
SUBLEVEL = 61
|
||||
EXTRAVERSION =
|
||||
NAME = Trick or Treat
|
||||
|
||||
@@ -1106,6 +1106,11 @@ KBUILD_CFLAGS += $(KCFLAGS)
|
||||
KBUILD_LDFLAGS_MODULE += --build-id=sha1
|
||||
LDFLAGS_vmlinux += --build-id=sha1
|
||||
|
||||
KBUILD_LDFLAGS += -z noexecstack
|
||||
ifeq ($(CONFIG_LD_IS_BFD),y)
|
||||
KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
|
||||
LDFLAGS_vmlinux += $(call ld-option, -X,)
|
||||
endif
|
||||
|
||||
@@ -200,6 +200,9 @@ config HAVE_NMI
|
||||
config TRACE_IRQFLAGS_SUPPORT
|
||||
bool
|
||||
|
||||
config TRACE_IRQFLAGS_NMI_SUPPORT
|
||||
bool
|
||||
|
||||
#
|
||||
# An arch should select this if it provides all these things:
|
||||
#
|
||||
|
||||
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
||||
bcm47094-luxul-xwr-3150-v1.dtb \
|
||||
bcm47094-netgear-r8500.dtb \
|
||||
bcm47094-phicomm-k3.dtb \
|
||||
bcm53015-meraki-mr26.dtb \
|
||||
bcm53016-meraki-mr32.dtb \
|
||||
bcm94708.dtb \
|
||||
bcm94709.dtb \
|
||||
|
||||
@@ -5,7 +5,7 @@
|
||||
|
||||
/ {
|
||||
model = "AST2500 EVB";
|
||||
compatible = "aspeed,ast2500";
|
||||
compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
|
||||
|
||||
aliases {
|
||||
serial4 = &uart5;
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
|
||||
/ {
|
||||
model = "AST2600 A1 EVB";
|
||||
compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
|
||||
|
||||
/delete-node/regulator-vcc-sdhci0;
|
||||
/delete-node/regulator-vcc-sdhci1;
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
|
||||
/ {
|
||||
model = "AST2600 EVB";
|
||||
compatible = "aspeed,ast2600";
|
||||
compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
serial4 = &uart5;
|
||||
|
||||
166
arch/arm/boot/dts/bcm53015-meraki-mr26.dts
Normal file
166
arch/arm/boot/dts/bcm53015-meraki-mr26.dts
Normal file
@@ -0,0 +1,166 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Meraki MR26 / Codename: Venom
|
||||
*
|
||||
* Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm4708.dtsi"
|
||||
#include "bcm5301x-nand-cs0-bch8.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
|
||||
model = "Meraki MR26";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x00000000 0x08000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_FAULT;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
|
||||
panic-indicator;
|
||||
};
|
||||
led-1 {
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
key-restart {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
clock-frequency = <50000000>;
|
||||
/delete-property/ clocks;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "disabled";
|
||||
};
|
||||
&gmac2 {
|
||||
status = "disabled";
|
||||
};
|
||||
&gmac3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&nandcs {
|
||||
nand-ecc-algo = "hw";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x200000 0x200000>;
|
||||
/* empty */
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "u-boot-backup";
|
||||
reg = <0x400000 0x200000>;
|
||||
/* empty */
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "u-boot-env-backup";
|
||||
reg = <0x600000 0x200000>;
|
||||
/* empty */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "ubi";
|
||||
reg = <0x800000 0x7780000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&srab {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "poe";
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
duplex-full;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinmux_i2c>;
|
||||
|
||||
clock-frequency = <100000>;
|
||||
|
||||
ina219@40 {
|
||||
compatible = "ti,ina219"; /* PoE power */
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <60000>; /* = 60 mOhms */
|
||||
};
|
||||
|
||||
eeprom@56 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x56>;
|
||||
pagesize = <32>;
|
||||
read-only;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* it's empty */
|
||||
};
|
||||
};
|
||||
|
||||
&thermal {
|
||||
status = "disabled";
|
||||
/* does not work, reads 418 degree Celsius */
|
||||
};
|
||||
@@ -64,20 +64,18 @@
|
||||
clock-frequency = <696000000>;
|
||||
clock-latency = <61036>; /* two CLK32 periods */
|
||||
#cooling-cells = <2>;
|
||||
operating-points = <
|
||||
operating-points =
|
||||
/* kHz uV */
|
||||
696000 1275000
|
||||
528000 1175000
|
||||
396000 1025000
|
||||
198000 950000
|
||||
>;
|
||||
fsl,soc-operating-points = <
|
||||
<696000 1275000>,
|
||||
<528000 1175000>,
|
||||
<396000 1025000>,
|
||||
<198000 950000>;
|
||||
fsl,soc-operating-points =
|
||||
/* KHz uV */
|
||||
696000 1275000
|
||||
528000 1175000
|
||||
396000 1175000
|
||||
198000 1175000
|
||||
>;
|
||||
<696000 1275000>,
|
||||
<528000 1175000>,
|
||||
<396000 1175000>,
|
||||
<198000 1175000>;
|
||||
clocks = <&clks IMX6UL_CLK_ARM>,
|
||||
<&clks IMX6UL_CLK_PLL2_BUS>,
|
||||
<&clks IMX6UL_CLK_PLL2_PFD2>,
|
||||
@@ -149,6 +147,9 @@
|
||||
ocram: sram@900000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x00900000 0x20000>;
|
||||
ranges = <0 0x00900000 0x20000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
intc: interrupt-controller@a01000 {
|
||||
@@ -543,7 +544,7 @@
|
||||
};
|
||||
|
||||
kpp: keypad@20b8000 {
|
||||
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
|
||||
compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
|
||||
reg = <0x020b8000 0x4000>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX6UL_CLK_KPP>;
|
||||
@@ -998,7 +999,7 @@
|
||||
};
|
||||
|
||||
csi: csi@21c4000 {
|
||||
compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
|
||||
compatible = "fsl,imx6ul-csi";
|
||||
reg = <0x021c4000 0x4000>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX6UL_CLK_CSI>;
|
||||
@@ -1007,7 +1008,7 @@
|
||||
};
|
||||
|
||||
lcdif: lcdif@21c8000 {
|
||||
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
|
||||
compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
|
||||
reg = <0x021c8000 0x4000>;
|
||||
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
|
||||
@@ -1028,7 +1029,7 @@
|
||||
qspi: spi@21e0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
|
||||
compatible = "fsl,imx6ul-qspi";
|
||||
reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
|
||||
reg-names = "QuadSPI", "QuadSPI-memory";
|
||||
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -13,6 +13,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <®_DCDC2>;
|
||||
};
|
||||
|
||||
&gpio6 {
|
||||
gpio-line-names = "",
|
||||
"",
|
||||
|
||||
@@ -324,6 +324,7 @@
|
||||
|
||||
pmicgpio: gpio@150 {
|
||||
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
|
||||
reg = <0x150>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-controller;
|
||||
|
||||
@@ -718,7 +718,7 @@
|
||||
blsp2_uart7: serial@f995d000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0xf995d000 0x1000>;
|
||||
interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
|
||||
@@ -25,6 +25,7 @@
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400>;
|
||||
interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -205,7 +205,7 @@
|
||||
blsp1_uart3: serial@831000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x00831000 0x200>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc 30>,
|
||||
<&gcc 9>;
|
||||
clock-names = "core", "iface";
|
||||
|
||||
@@ -544,8 +544,8 @@
|
||||
reg = <0x19>;
|
||||
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
|
||||
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
|
||||
mount-matrix = "0", "-1", "0",
|
||||
"1", "0", "0",
|
||||
mount-matrix = "0", "1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -502,8 +502,8 @@
|
||||
accelerometer@18 {
|
||||
compatible = "bosch,bma222e";
|
||||
reg = <0x18>;
|
||||
mount-matrix = "0", "1", "0",
|
||||
"-1", "0", "0",
|
||||
mount-matrix = "0", "-1", "0",
|
||||
"1", "0", "0",
|
||||
"0", "0", "1";
|
||||
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
|
||||
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
|
||||
|
||||
@@ -597,8 +597,8 @@
|
||||
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
|
||||
status = "disabled";
|
||||
reg = <0x65a00000 0xcd00>;
|
||||
interrupt-names = "host", "peripheral";
|
||||
interrupts = <0 134 4>, <0 135 4>;
|
||||
interrupt-names = "dwc_usb3";
|
||||
interrupts = <0 134 4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
|
||||
clock-names = "ref", "bus_early", "suspend";
|
||||
@@ -693,8 +693,8 @@
|
||||
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
|
||||
status = "disabled";
|
||||
reg = <0x65c00000 0xcd00>;
|
||||
interrupt-names = "host", "peripheral";
|
||||
interrupts = <0 137 4>, <0 138 4>;
|
||||
interrupt-names = "dwc_usb3";
|
||||
interrupts = <0 137 4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
|
||||
clock-names = "ref", "bus_early", "suspend";
|
||||
|
||||
@@ -63,7 +63,7 @@ config CRYPTO_SHA512_ARM
|
||||
using optimized ARM assembler and NEON, when available.
|
||||
|
||||
config CRYPTO_BLAKE2S_ARM
|
||||
tristate "BLAKE2s digest algorithm (ARM)"
|
||||
bool "BLAKE2s digest algorithm (ARM)"
|
||||
select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
|
||||
help
|
||||
BLAKE2s digest algorithm optimized with ARM scalar instructions. This
|
||||
|
||||
@@ -9,8 +9,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
|
||||
obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
|
||||
obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
|
||||
obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
|
||||
obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o
|
||||
obj-$(if $(CONFIG_CRYPTO_BLAKE2S_ARM),y) += libblake2s-arm.o
|
||||
obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
|
||||
obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
|
||||
obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
|
||||
obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
|
||||
@@ -32,7 +31,6 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
|
||||
sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
|
||||
sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
|
||||
sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
|
||||
blake2s-arm-y := blake2s-shash.o
|
||||
libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
|
||||
blake2b-neon-y := blake2b-neon-core.o blake2b-neon-glue.o
|
||||
sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o
|
||||
|
||||
@@ -1,75 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* BLAKE2s digest algorithm, ARM scalar implementation
|
||||
*
|
||||
* Copyright 2020 Google LLC
|
||||
*/
|
||||
|
||||
#include <crypto/internal/blake2s.h>
|
||||
#include <crypto/internal/hash.h>
|
||||
|
||||
#include <linux/module.h>
|
||||
|
||||
static int crypto_blake2s_update_arm(struct shash_desc *desc,
|
||||
const u8 *in, unsigned int inlen)
|
||||
{
|
||||
return crypto_blake2s_update(desc, in, inlen, false);
|
||||
}
|
||||
|
||||
static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
|
||||
{
|
||||
return crypto_blake2s_final(desc, out, false);
|
||||
}
|
||||
|
||||
#define BLAKE2S_ALG(name, driver_name, digest_size) \
|
||||
{ \
|
||||
.base.cra_name = name, \
|
||||
.base.cra_driver_name = driver_name, \
|
||||
.base.cra_priority = 200, \
|
||||
.base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \
|
||||
.base.cra_blocksize = BLAKE2S_BLOCK_SIZE, \
|
||||
.base.cra_ctxsize = sizeof(struct blake2s_tfm_ctx), \
|
||||
.base.cra_module = THIS_MODULE, \
|
||||
.digestsize = digest_size, \
|
||||
.setkey = crypto_blake2s_setkey, \
|
||||
.init = crypto_blake2s_init, \
|
||||
.update = crypto_blake2s_update_arm, \
|
||||
.final = crypto_blake2s_final_arm, \
|
||||
.descsize = sizeof(struct blake2s_state), \
|
||||
}
|
||||
|
||||
static struct shash_alg blake2s_arm_algs[] = {
|
||||
BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
|
||||
BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
|
||||
BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
|
||||
BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
|
||||
};
|
||||
|
||||
static int __init blake2s_arm_mod_init(void)
|
||||
{
|
||||
return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
|
||||
crypto_register_shashes(blake2s_arm_algs,
|
||||
ARRAY_SIZE(blake2s_arm_algs)) : 0;
|
||||
}
|
||||
|
||||
static void __exit blake2s_arm_mod_exit(void)
|
||||
{
|
||||
if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
|
||||
crypto_unregister_shashes(blake2s_arm_algs,
|
||||
ARRAY_SIZE(blake2s_arm_algs));
|
||||
}
|
||||
|
||||
module_init(blake2s_arm_mod_init);
|
||||
module_exit(blake2s_arm_mod_exit);
|
||||
|
||||
MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-128");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-128-arm");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-160");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-160-arm");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-224");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-224-arm");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-256");
|
||||
MODULE_ALIAS_CRYPTO("blake2s-256-arm");
|
||||
@@ -13,28 +13,4 @@
|
||||
@
|
||||
badrne lr, 1b
|
||||
bne asm_do_IRQ
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/*
|
||||
* XXX
|
||||
*
|
||||
* this macro assumes that irqstat (r2) and base (r6) are
|
||||
* preserved from get_irqnr_and_base above
|
||||
*/
|
||||
ALT_SMP(test_for_ipi r0, r2, r6, lr)
|
||||
ALT_UP_B(9997f)
|
||||
movne r1, sp
|
||||
badrne lr, 1b
|
||||
bne do_IPI
|
||||
#endif
|
||||
9997:
|
||||
.endm
|
||||
|
||||
.macro arch_irq_handler, symbol_name
|
||||
.align 5
|
||||
.global \symbol_name
|
||||
\symbol_name:
|
||||
mov r8, lr
|
||||
arch_irq_handler_default
|
||||
ret r8
|
||||
.endm
|
||||
|
||||
@@ -24,11 +24,6 @@ struct seq_file;
|
||||
*/
|
||||
extern void show_ipi_list(struct seq_file *, int);
|
||||
|
||||
/*
|
||||
* Called from assembly code, this handles an IPI.
|
||||
*/
|
||||
asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
|
||||
|
||||
/*
|
||||
* Called from C code, this handles an IPI.
|
||||
*/
|
||||
|
||||
@@ -626,11 +626,6 @@ static void ipi_complete(unsigned int cpu)
|
||||
/*
|
||||
* Main handler for inter-processor interrupts
|
||||
*/
|
||||
asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
|
||||
{
|
||||
handle_IPI(ipinr, regs);
|
||||
}
|
||||
|
||||
static void do_handle_IPI(int ipinr)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
|
||||
@@ -40,8 +40,8 @@ ENDPROC(_find_first_zero_bit_le)
|
||||
* Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
|
||||
*/
|
||||
ENTRY(_find_next_zero_bit_le)
|
||||
teq r1, #0
|
||||
beq 3b
|
||||
cmp r2, r1
|
||||
bhs 3b
|
||||
ands ip, r2, #7
|
||||
beq 1b @ If new byte, goto old routine
|
||||
ARM( ldrb r3, [r0, r2, lsr #3] )
|
||||
@@ -81,8 +81,8 @@ ENDPROC(_find_first_bit_le)
|
||||
* Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
|
||||
*/
|
||||
ENTRY(_find_next_bit_le)
|
||||
teq r1, #0
|
||||
beq 3b
|
||||
cmp r2, r1
|
||||
bhs 3b
|
||||
ands ip, r2, #7
|
||||
beq 1b @ If new byte, goto old routine
|
||||
ARM( ldrb r3, [r0, r2, lsr #3] )
|
||||
@@ -115,8 +115,8 @@ ENTRY(_find_first_zero_bit_be)
|
||||
ENDPROC(_find_first_zero_bit_be)
|
||||
|
||||
ENTRY(_find_next_zero_bit_be)
|
||||
teq r1, #0
|
||||
beq 3b
|
||||
cmp r2, r1
|
||||
bhs 3b
|
||||
ands ip, r2, #7
|
||||
beq 1b @ If new byte, goto old routine
|
||||
eor r3, r2, #0x18 @ big endian byte ordering
|
||||
@@ -149,8 +149,8 @@ ENTRY(_find_first_bit_be)
|
||||
ENDPROC(_find_first_bit_be)
|
||||
|
||||
ENTRY(_find_next_bit_be)
|
||||
teq r1, #0
|
||||
beq 3b
|
||||
cmp r2, r1
|
||||
bhs 3b
|
||||
ands ip, r2, #7
|
||||
beq 1b @ If new byte, goto old routine
|
||||
eor r3, r2, #0x18 @ big endian byte ordering
|
||||
|
||||
@@ -52,6 +52,7 @@ int __init bcm_kona_smc_init(void)
|
||||
return -ENODEV;
|
||||
|
||||
prop_val = of_get_address(node, 0, &prop_size, NULL);
|
||||
of_node_put(node);
|
||||
if (!prop_val)
|
||||
return -EINVAL;
|
||||
|
||||
|
||||
@@ -211,6 +211,7 @@ static int __init omapdss_init_fbdev(void)
|
||||
node = of_find_node_by_name(NULL, "omap4_padconf_global");
|
||||
if (node)
|
||||
omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
|
||||
of_node_put(node);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -259,11 +260,13 @@ static int __init omapdss_init_of(void)
|
||||
|
||||
if (!pdev) {
|
||||
pr_err("Unable to find DSS platform device\n");
|
||||
of_node_put(node);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
r = of_platform_populate(node, NULL, NULL, &pdev->dev);
|
||||
put_device(&pdev->dev);
|
||||
of_node_put(node);
|
||||
if (r) {
|
||||
pr_err("Unable to populate DSS submodule devices\n");
|
||||
return r;
|
||||
|
||||
@@ -587,6 +587,8 @@ pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
|
||||
|
||||
of_platform_populate(np, omap_dt_match_table,
|
||||
omap_auxdata_lookup, NULL);
|
||||
|
||||
of_node_put(np);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -708,6 +708,7 @@ static int omap3xxx_prm_late_init(void)
|
||||
}
|
||||
|
||||
irq_num = of_irq_get(np, 0);
|
||||
of_node_put(np);
|
||||
if (irq_num == -EPROBE_DEFER)
|
||||
return irq_num;
|
||||
|
||||
|
||||
@@ -125,6 +125,7 @@ remove:
|
||||
|
||||
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
|
||||
list_del(&pos->list);
|
||||
of_node_put(pos->np);
|
||||
kfree(pos);
|
||||
}
|
||||
|
||||
@@ -174,11 +175,12 @@ static int __init rcar_gen2_regulator_quirk(void)
|
||||
memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
|
||||
|
||||
quirk->id = id;
|
||||
quirk->np = np;
|
||||
quirk->np = of_node_get(np);
|
||||
quirk->i2c_msg.addr = addr;
|
||||
|
||||
ret = of_irq_parse_one(np, 0, argsa);
|
||||
if (ret) { /* Skip invalid entry and continue */
|
||||
of_node_put(np);
|
||||
kfree(quirk);
|
||||
continue;
|
||||
}
|
||||
@@ -225,6 +227,7 @@ err_free:
|
||||
err_mem:
|
||||
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
|
||||
list_del(&pos->list);
|
||||
of_node_put(pos->np);
|
||||
kfree(pos);
|
||||
}
|
||||
|
||||
|
||||
@@ -77,6 +77,7 @@ static int __init zynq_get_revision(void)
|
||||
}
|
||||
|
||||
zynq_devcfg_base = of_iomap(np, 0);
|
||||
of_node_put(np);
|
||||
if (!zynq_devcfg_base) {
|
||||
pr_err("%s: Unable to map I/O memory\n", __func__);
|
||||
return -1;
|
||||
|
||||
@@ -10,6 +10,7 @@ config ARM64
|
||||
select ACPI_SPCR_TABLE if ACPI
|
||||
select ACPI_PPTT if ACPI
|
||||
select ARCH_HAS_DEBUG_WX
|
||||
select ARCH_BINFMT_ELF_EXTRA_PHDRS
|
||||
select ARCH_BINFMT_ELF_STATE
|
||||
select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
|
||||
select ARCH_ENABLE_MEMORY_HOTPLUG
|
||||
@@ -225,6 +226,7 @@ config ARM64
|
||||
select THREAD_INFO_IN_TASK
|
||||
select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
|
||||
select TRACE_IRQFLAGS_SUPPORT
|
||||
select TRACE_IRQFLAGS_NMI_SUPPORT
|
||||
select ARCH_SUPPORTS_SPECULATIVE_PAGE_FAULT
|
||||
help
|
||||
ARM 64-bit (AArch64) Linux support.
|
||||
@@ -1857,17 +1859,6 @@ config ARM64_SVE
|
||||
booting the kernel. If unsure and you are not observing these
|
||||
symptoms, you should assume that it is safe to say Y.
|
||||
|
||||
config ARM64_SME
|
||||
bool "ARM Scalable Matrix Extension support"
|
||||
default y
|
||||
depends on ARM64_SVE
|
||||
help
|
||||
The Scalable Matrix Extension (SME) is an extension to the AArch64
|
||||
execution state which utilises a substantial subset of the SVE
|
||||
instruction set, together with the addition of new architectural
|
||||
register state capable of holding two dimensional matrix tiles to
|
||||
enable various matrix operations.
|
||||
|
||||
config ARM64_MODULE_PLTS
|
||||
bool "Use PLTs to allow module memory to spill over into vmalloc area"
|
||||
depends on MODULES
|
||||
|
||||
@@ -40,7 +40,7 @@
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
status {
|
||||
led-0 {
|
||||
label = "orangepi:green:status";
|
||||
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
||||
};
|
||||
|
||||
@@ -49,7 +49,7 @@
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -39,7 +39,7 @@
|
||||
reg = <0x000>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <1701000000>;
|
||||
cpu-idle-states = <&cpuoff_l &clusteroff_l>;
|
||||
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
|
||||
next-level-cache = <&l2_0>;
|
||||
capacity-dmips-mhz = <530>;
|
||||
};
|
||||
@@ -50,7 +50,7 @@
|
||||
reg = <0x100>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <1701000000>;
|
||||
cpu-idle-states = <&cpuoff_l &clusteroff_l>;
|
||||
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
|
||||
next-level-cache = <&l2_0>;
|
||||
capacity-dmips-mhz = <530>;
|
||||
};
|
||||
@@ -61,7 +61,7 @@
|
||||
reg = <0x200>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <1701000000>;
|
||||
cpu-idle-states = <&cpuoff_l &clusteroff_l>;
|
||||
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
|
||||
next-level-cache = <&l2_0>;
|
||||
capacity-dmips-mhz = <530>;
|
||||
};
|
||||
@@ -72,7 +72,7 @@
|
||||
reg = <0x300>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <1701000000>;
|
||||
cpu-idle-states = <&cpuoff_l &clusteroff_l>;
|
||||
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
|
||||
next-level-cache = <&l2_0>;
|
||||
capacity-dmips-mhz = <530>;
|
||||
};
|
||||
@@ -83,7 +83,7 @@
|
||||
reg = <0x400>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <2171000000>;
|
||||
cpu-idle-states = <&cpuoff_b &clusteroff_b>;
|
||||
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
|
||||
next-level-cache = <&l2_1>;
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
@@ -94,7 +94,7 @@
|
||||
reg = <0x500>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <2171000000>;
|
||||
cpu-idle-states = <&cpuoff_b &clusteroff_b>;
|
||||
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
|
||||
next-level-cache = <&l2_1>;
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
@@ -105,7 +105,7 @@
|
||||
reg = <0x600>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <2171000000>;
|
||||
cpu-idle-states = <&cpuoff_b &clusteroff_b>;
|
||||
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
|
||||
next-level-cache = <&l2_1>;
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
@@ -116,7 +116,7 @@
|
||||
reg = <0x700>;
|
||||
enable-method = "psci";
|
||||
clock-frequency = <2171000000>;
|
||||
cpu-idle-states = <&cpuoff_b &clusteroff_b>;
|
||||
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
|
||||
next-level-cache = <&l2_1>;
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
@@ -168,8 +168,8 @@
|
||||
};
|
||||
|
||||
idle-states {
|
||||
entry-method = "arm,psci";
|
||||
cpuoff_l: cpuoff_l {
|
||||
entry-method = "psci";
|
||||
cpu_sleep_l: cpu-sleep-l {
|
||||
compatible = "arm,idle-state";
|
||||
arm,psci-suspend-param = <0x00010001>;
|
||||
local-timer-stop;
|
||||
@@ -177,7 +177,7 @@
|
||||
exit-latency-us = <140>;
|
||||
min-residency-us = <780>;
|
||||
};
|
||||
cpuoff_b: cpuoff_b {
|
||||
cpu_sleep_b: cpu-sleep-b {
|
||||
compatible = "arm,idle-state";
|
||||
arm,psci-suspend-param = <0x00010001>;
|
||||
local-timer-stop;
|
||||
@@ -185,7 +185,7 @@
|
||||
exit-latency-us = <145>;
|
||||
min-residency-us = <720>;
|
||||
};
|
||||
clusteroff_l: clusteroff_l {
|
||||
cluster_sleep_l: cluster-sleep-l {
|
||||
compatible = "arm,idle-state";
|
||||
arm,psci-suspend-param = <0x01010002>;
|
||||
local-timer-stop;
|
||||
@@ -193,7 +193,7 @@
|
||||
exit-latency-us = <155>;
|
||||
min-residency-us = <860>;
|
||||
};
|
||||
clusteroff_b: clusteroff_b {
|
||||
cluster_sleep_b: cluster-sleep-b {
|
||||
compatible = "arm,idle-state";
|
||||
arm,psci-suspend-param = <0x01010002>;
|
||||
local-timer-stop;
|
||||
|
||||
@@ -1583,6 +1583,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x30000000 0x50000>;
|
||||
no-memory-wc;
|
||||
|
||||
cpu_bpmp_tx: sram@4e000 {
|
||||
reg = <0x4e000 0x1000>;
|
||||
@@ -1635,7 +1636,7 @@
|
||||
iommus = <&smmu TEGRA186_SID_BPMP>;
|
||||
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
|
||||
TEGRA_HSP_DB_MASTER_BPMP>;
|
||||
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
|
||||
shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
|
||||
@@ -75,7 +75,7 @@
|
||||
|
||||
/* SDMMC1 (SD/MMC) */
|
||||
mmc@3400000 {
|
||||
cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* SDMMC4 (eMMC) */
|
||||
|
||||
@@ -2249,6 +2249,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x40000000 0x50000>;
|
||||
no-memory-wc;
|
||||
|
||||
cpu_bpmp_tx: sram@4e000 {
|
||||
reg = <0x4e000 0x1000>;
|
||||
@@ -2267,7 +2268,7 @@
|
||||
compatible = "nvidia,tegra186-bpmp";
|
||||
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
|
||||
TEGRA_HSP_DB_MASTER_BPMP>;
|
||||
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
|
||||
shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
|
||||
@@ -122,21 +122,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
sysram@40000000 {
|
||||
sram@40000000 {
|
||||
compatible = "nvidia,tegra234-sysram", "mmio-sram";
|
||||
reg = <0x0 0x40000000 0x0 0x50000>;
|
||||
reg = <0x0 0x40000000 0x0 0x80000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x40000000 0x50000>;
|
||||
ranges = <0x0 0x0 0x40000000 0x80000>;
|
||||
no-memory-wc;
|
||||
|
||||
cpu_bpmp_tx: shmem@4e000 {
|
||||
reg = <0x4e000 0x1000>;
|
||||
cpu_bpmp_tx: sram@70000 {
|
||||
reg = <0x70000 0x1000>;
|
||||
label = "cpu-bpmp-tx";
|
||||
pool;
|
||||
};
|
||||
|
||||
cpu_bpmp_rx: shmem@4f000 {
|
||||
reg = <0x4f000 0x1000>;
|
||||
cpu_bpmp_rx: sram@71000 {
|
||||
reg = <0x71000 0x1000>;
|
||||
label = "cpu-bpmp-rx";
|
||||
pool;
|
||||
};
|
||||
@@ -146,7 +147,7 @@
|
||||
compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp";
|
||||
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
|
||||
TEGRA_HSP_DB_MASTER_BPMP>;
|
||||
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
|
||||
shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
|
||||
@@ -437,7 +437,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qpic_nand: nand@79b0000 {
|
||||
qpic_nand: nand-controller@79b0000 {
|
||||
compatible = "qcom,ipq8074-nand";
|
||||
reg = <0x079b0000 0x10000>;
|
||||
#address-cells = <1>;
|
||||
|
||||
@@ -1747,8 +1747,8 @@
|
||||
<&rpmpd MSM8916_VDDMX>;
|
||||
power-domain-names = "cx", "mx";
|
||||
|
||||
qcom,state = <&wcnss_smp2p_out 0>;
|
||||
qcom,state-names = "stop";
|
||||
qcom,smem-states = <&wcnss_smp2p_out 0>;
|
||||
qcom,smem-state-names = "stop";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wcnss_pin_a>;
|
||||
|
||||
@@ -548,7 +548,7 @@
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x07580000 0xcd00>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usb2_phy_sec>, <&usb3_phy>;
|
||||
phys = <&usb2_phy_prim>, <&usb3_phy>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
snps,has-lpm-erratum;
|
||||
snps,hird-threshold = /bits/ 8 <0x10>;
|
||||
@@ -577,7 +577,7 @@
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x078c0000 0xcc00>;
|
||||
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usb2_phy_prim>;
|
||||
phys = <&usb2_phy_sec>;
|
||||
phy-names = "usb2-phy";
|
||||
snps,has-lpm-erratum;
|
||||
snps,hird-threshold = /bits/ 8 <0x10>;
|
||||
|
||||
@@ -42,6 +42,7 @@
|
||||
*/
|
||||
|
||||
/delete-node/ &hyp_mem;
|
||||
/delete-node/ &ipa_fw_mem;
|
||||
/delete-node/ &xbl_mem;
|
||||
/delete-node/ &aop_mem;
|
||||
/delete-node/ &sec_apps_mem;
|
||||
|
||||
@@ -8,6 +8,7 @@
|
||||
#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
|
||||
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
|
||||
#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
#include <dt-bindings/interconnect/qcom,sdm660.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
@@ -1041,11 +1042,13 @@
|
||||
nvmem-cells = <&gpu_speed_bin>;
|
||||
nvmem-cell-names = "speed_bin";
|
||||
|
||||
interconnects = <&gnoc 1 &bimc 5>;
|
||||
interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
|
||||
interconnect-names = "gfx-mem";
|
||||
|
||||
operating-points-v2 = <&gpu_sdm630_opp_table>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
gpu_sdm630_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
opp-775000000 {
|
||||
@@ -1251,7 +1254,7 @@
|
||||
#phy-cells = <0>;
|
||||
|
||||
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
|
||||
<&gcc GCC_RX1_USB2_CLKREF_CLK>;
|
||||
<&gcc GCC_RX0_USB2_CLKREF_CLK>;
|
||||
clock-names = "cfg_ahb", "ref";
|
||||
|
||||
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
};
|
||||
|
||||
&sdc2_state_on {
|
||||
pinconf-clk {
|
||||
clk {
|
||||
drive-strength = <14>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -88,11 +88,19 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdc2_state_off {
|
||||
&sdc2_off_state {
|
||||
sd-cd {
|
||||
pins = "gpio98";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&sdc2_on_state {
|
||||
sd-cd {
|
||||
pins = "gpio98";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -102,32 +110,6 @@
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <22 2>, <28 6>;
|
||||
|
||||
sdc2_state_on: sdc2-on {
|
||||
clk {
|
||||
pins = "sdc2_clk";
|
||||
bias-disable;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
cmd {
|
||||
pins = "sdc2_cmd";
|
||||
bias-pull-up;
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "sdc2_data";
|
||||
bias-pull-up;
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
sd-cd {
|
||||
pins = "gpio98";
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
|
||||
@@ -336,23 +336,43 @@
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
sdc2_state_off: sdc2-off {
|
||||
sdc2_off_state: sdc2-off-state {
|
||||
clk {
|
||||
pins = "sdc2_clk";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd {
|
||||
pins = "sdc2_cmd";
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "sdc2_data";
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
sdc2_on_state: sdc2-on-state {
|
||||
clk {
|
||||
pins = "sdc2_clk";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd {
|
||||
pins = "sdc2_cmd";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "sdc2_data";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -417,8 +437,8 @@
|
||||
<&xo_board>;
|
||||
clock-names = "iface", "core", "xo";
|
||||
|
||||
pinctrl-0 = <&sdc2_state_on>;
|
||||
pinctrl-1 = <&sdc2_state_off>;
|
||||
pinctrl-0 = <&sdc2_on_state>;
|
||||
pinctrl-1 = <&sdc2_off_state>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
bus-width = <4>;
|
||||
|
||||
@@ -1472,6 +1472,8 @@
|
||||
clock-names = "pipe0";
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "pcie_0_pipe_clk";
|
||||
};
|
||||
};
|
||||
@@ -1578,6 +1580,8 @@
|
||||
clock-names = "pipe0";
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "pcie_1_pipe_clk";
|
||||
};
|
||||
};
|
||||
@@ -1684,6 +1688,8 @@
|
||||
clock-names = "pipe0";
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "pcie_2_pipe_clk";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -146,7 +146,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
reg_audio: regulator_audio {
|
||||
reg_audio: regulator-audio {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "audio-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
@@ -174,7 +174,7 @@
|
||||
vin-supply = <®_lcd>;
|
||||
};
|
||||
|
||||
reg_cam0: regulator_camera {
|
||||
reg_cam0: regulator-cam0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "reg_cam0";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
@@ -183,7 +183,7 @@
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_cam1: regulator_camera {
|
||||
reg_cam1: regulator-cam1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "reg_cam1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
@@ -1953,7 +1953,7 @@
|
||||
cpu-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&thermal 0>;
|
||||
thermal-sensors = <&thermal>;
|
||||
sustainable-power = <717>;
|
||||
|
||||
cooling-maps {
|
||||
|
||||
@@ -2102,7 +2102,7 @@
|
||||
cpu-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&thermal 0>;
|
||||
thermal-sensors = <&thermal>;
|
||||
sustainable-power = <717>;
|
||||
|
||||
cooling-maps {
|
||||
|
||||
@@ -599,8 +599,8 @@
|
||||
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
|
||||
status = "disabled";
|
||||
reg = <0x65a00000 0xcd00>;
|
||||
interrupt-names = "host", "peripheral";
|
||||
interrupts = <0 134 4>, <0 135 4>;
|
||||
interrupt-names = "dwc_usb3";
|
||||
interrupts = <0 134 4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
|
||||
clock-names = "ref", "bus_early", "suspend";
|
||||
@@ -701,8 +701,8 @@
|
||||
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
|
||||
status = "disabled";
|
||||
reg = <0x65c00000 0xcd00>;
|
||||
interrupt-names = "host", "peripheral";
|
||||
interrupts = <0 137 4>, <0 138 4>;
|
||||
interrupt-names = "dwc_usb3";
|
||||
interrupts = <0 137 4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
|
||||
clock-names = "ref", "bus_early", "suspend";
|
||||
|
||||
@@ -59,6 +59,7 @@ config CRYPTO_GHASH_ARM64_CE
|
||||
select CRYPTO_HASH
|
||||
select CRYPTO_GF128MUL
|
||||
select CRYPTO_LIB_AES
|
||||
select CRYPTO_AEAD
|
||||
|
||||
config CRYPTO_POLYVAL_ARM64_CE
|
||||
tristate "POLYVAL using ARMv8 Crypto Extensions (for HCTR2)"
|
||||
|
||||
@@ -275,8 +275,9 @@ void tls_preserve_current_state(void);
|
||||
|
||||
static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
|
||||
{
|
||||
s32 previous_syscall = regs->syscallno;
|
||||
memset(regs, 0, sizeof(*regs));
|
||||
forget_syscall(regs);
|
||||
regs->syscallno = previous_syscall;
|
||||
regs->pc = pc;
|
||||
|
||||
if (system_uses_irq_prio_masking())
|
||||
|
||||
@@ -561,7 +561,7 @@ static const struct arm64_ftr_bits ftr_id_pfr2[] = {
|
||||
|
||||
static const struct arm64_ftr_bits ftr_id_dfr0[] = {
|
||||
/* [31:28] TraceFilt */
|
||||
S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_PERFMON_SHIFT, 4, 0xf),
|
||||
S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_DFR0_PERFMON_SHIFT, 4, 0),
|
||||
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MPROFDBG_SHIFT, 4, 0),
|
||||
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPTRC_SHIFT, 4, 0),
|
||||
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPTRC_SHIFT, 4, 0),
|
||||
|
||||
@@ -326,11 +326,6 @@ static void swsusp_mte_restore_tags(void)
|
||||
unsigned long pfn = xa_state.xa_index;
|
||||
struct page *page = pfn_to_online_page(pfn);
|
||||
|
||||
/*
|
||||
* It is not required to invoke page_kasan_tag_reset(page)
|
||||
* at this point since the tags stored in page->flags are
|
||||
* already restored.
|
||||
*/
|
||||
mte_restore_page_tags(page_address(page), tags);
|
||||
|
||||
mte_free_tag_storage(tags);
|
||||
|
||||
@@ -47,15 +47,6 @@ static void mte_sync_page_tags(struct page *page, pte_t old_pte,
|
||||
if (!pte_is_tagged)
|
||||
return;
|
||||
|
||||
page_kasan_tag_reset(page);
|
||||
/*
|
||||
* We need smp_wmb() in between setting the flags and clearing the
|
||||
* tags because if another thread reads page->flags and builds a
|
||||
* tagged address out of it, there is an actual dependency to the
|
||||
* memory access, but on the current thread we do not guarantee that
|
||||
* the new page->flags are visible before the tags were updated.
|
||||
*/
|
||||
smp_wmb();
|
||||
mte_clear_page_tags(page_address(page));
|
||||
}
|
||||
|
||||
|
||||
@@ -386,5 +386,5 @@ asmlinkage void __noreturn hyp_panic_bad_stack(void)
|
||||
|
||||
asmlinkage void kvm_unexpected_el2_exception(void)
|
||||
{
|
||||
return __kvm_unexpected_el2_exception();
|
||||
__kvm_unexpected_el2_exception();
|
||||
}
|
||||
|
||||
@@ -249,5 +249,5 @@ void __noreturn hyp_panic(void)
|
||||
|
||||
asmlinkage void kvm_unexpected_el2_exception(void)
|
||||
{
|
||||
return __kvm_unexpected_el2_exception();
|
||||
__kvm_unexpected_el2_exception();
|
||||
}
|
||||
|
||||
@@ -23,15 +23,6 @@ void copy_highpage(struct page *to, struct page *from)
|
||||
|
||||
if (system_supports_mte() && test_bit(PG_mte_tagged, &from->flags)) {
|
||||
set_bit(PG_mte_tagged, &to->flags);
|
||||
page_kasan_tag_reset(to);
|
||||
/*
|
||||
* We need smp_wmb() in between setting the flags and clearing the
|
||||
* tags because if another thread reads page->flags and builds a
|
||||
* tagged address out of it, there is an actual dependency to the
|
||||
* memory access, but on the current thread we do not guarantee that
|
||||
* the new page->flags are visible before the tags were updated.
|
||||
*/
|
||||
smp_wmb();
|
||||
mte_copy_page_tags(kto, kfrom);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -53,15 +53,6 @@ bool mte_restore_tags(swp_entry_t entry, struct page *page)
|
||||
if (!tags)
|
||||
return false;
|
||||
|
||||
page_kasan_tag_reset(page);
|
||||
/*
|
||||
* We need smp_wmb() in between setting the flags and clearing the
|
||||
* tags because if another thread reads page->flags and builds a
|
||||
* tagged address out of it, there is an actual dependency to the
|
||||
* memory access, but on the current thread we do not guarantee that
|
||||
* the new page->flags are visible before the tags were updated.
|
||||
*/
|
||||
smp_wmb();
|
||||
mte_restore_page_tags(page_address(page), tags);
|
||||
|
||||
return true;
|
||||
|
||||
@@ -542,7 +542,7 @@ ia64_get_irr(unsigned int vector)
|
||||
{
|
||||
unsigned int reg = vector / 64;
|
||||
unsigned int bit = vector % 64;
|
||||
u64 irr;
|
||||
unsigned long irr;
|
||||
|
||||
switch (reg) {
|
||||
case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break;
|
||||
|
||||
@@ -172,7 +172,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
|
||||
{
|
||||
unsigned long i = *pos;
|
||||
|
||||
return i < NR_CPUS ? (void *) (i + 1) : NULL;
|
||||
return i < nr_cpu_ids ? (void *) (i + 1) : NULL;
|
||||
}
|
||||
|
||||
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
|
||||
|
||||
@@ -159,7 +159,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
|
||||
/* Map GIC user page. */
|
||||
if (gic_size) {
|
||||
gic_base = (unsigned long)mips_gic_base + MIPS_GIC_USER_OFS;
|
||||
gic_pfn = virt_to_phys((void *)gic_base) >> PAGE_SHIFT;
|
||||
gic_pfn = PFN_DOWN(__pa(gic_base));
|
||||
|
||||
ret = io_remap_pfn_range(vma, base, gic_pfn, gic_size,
|
||||
pgprot_noncached(vma->vm_page_prot));
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
#include <linux/mmdebug.h>
|
||||
#include <linux/mm.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/sections.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/page.h>
|
||||
@@ -12,15 +13,6 @@
|
||||
|
||||
static inline bool __debug_virt_addr_valid(unsigned long x)
|
||||
{
|
||||
/* high_memory does not get immediately defined, and there
|
||||
* are early callers of __pa() against PAGE_OFFSET
|
||||
*/
|
||||
if (!high_memory && x >= PAGE_OFFSET)
|
||||
return true;
|
||||
|
||||
if (high_memory && x >= PAGE_OFFSET && x < (unsigned long)high_memory)
|
||||
return true;
|
||||
|
||||
/*
|
||||
* MAX_DMA_ADDRESS is a virtual address that may not correspond to an
|
||||
* actual physical address. Enough code relies on
|
||||
@@ -30,7 +22,9 @@ static inline bool __debug_virt_addr_valid(unsigned long x)
|
||||
if (x == MAX_DMA_ADDRESS)
|
||||
return true;
|
||||
|
||||
return false;
|
||||
return x >= PAGE_OFFSET && (KSEGX(x) < KSEG2 ||
|
||||
IS_ENABLED(CONFIG_EVA) ||
|
||||
!IS_ENABLED(CONFIG_HIGHMEM));
|
||||
}
|
||||
|
||||
phys_addr_t __virt_to_phys(volatile const void *x)
|
||||
|
||||
@@ -46,9 +46,6 @@ void flush_icache_page_asm(unsigned long phys_addr, unsigned long vaddr);
|
||||
*/
|
||||
DEFINE_SPINLOCK(pa_tlb_flush_lock);
|
||||
|
||||
/* Swapper page setup lock. */
|
||||
DEFINE_SPINLOCK(pa_swapper_pg_lock);
|
||||
|
||||
#if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
|
||||
int pa_serialize_tlb_flushes __ro_after_init;
|
||||
#endif
|
||||
|
||||
@@ -520,7 +520,6 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
|
||||
dev->id.hversion_rev = iodc_data[1] & 0x0f;
|
||||
dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
|
||||
(iodc_data[5] << 8) | iodc_data[6];
|
||||
dev->hpa.name = parisc_pathname(dev);
|
||||
dev->hpa.start = hpa;
|
||||
/* This is awkward. The STI spec says that gfx devices may occupy
|
||||
* 32MB or 64MB. Unfortunately, we don't know how to tell whether
|
||||
@@ -534,10 +533,10 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
|
||||
dev->hpa.end = hpa + 0xfff;
|
||||
}
|
||||
dev->hpa.flags = IORESOURCE_MEM;
|
||||
name = parisc_hardware_description(&dev->id);
|
||||
if (name) {
|
||||
strlcpy(dev->name, name, sizeof(dev->name));
|
||||
}
|
||||
dev->hpa.name = dev->name;
|
||||
name = parisc_hardware_description(&dev->id) ? : "unknown";
|
||||
snprintf(dev->name, sizeof(dev->name), "%s [%s]",
|
||||
name, parisc_pathname(dev));
|
||||
|
||||
/* Silently fail things like mouse ports which are subsumed within
|
||||
* the keyboard controller
|
||||
|
||||
@@ -413,7 +413,7 @@
|
||||
412 32 utimensat_time64 sys_utimensat sys_utimensat
|
||||
413 32 pselect6_time64 sys_pselect6 compat_sys_pselect6_time64
|
||||
414 32 ppoll_time64 sys_ppoll compat_sys_ppoll_time64
|
||||
416 32 io_pgetevents_time64 sys_io_pgetevents sys_io_pgetevents
|
||||
416 32 io_pgetevents_time64 sys_io_pgetevents compat_sys_io_pgetevents_time64
|
||||
417 32 recvmmsg_time64 sys_recvmmsg compat_sys_recvmmsg_time64
|
||||
418 32 mq_timedsend_time64 sys_mq_timedsend sys_mq_timedsend
|
||||
419 32 mq_timedreceive_time64 sys_mq_timedreceive sys_mq_timedreceive
|
||||
|
||||
@@ -38,12 +38,7 @@ static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
|
||||
#endif /* CONFIG_ARCH_RANDOM */
|
||||
|
||||
#ifdef CONFIG_PPC_POWERNV
|
||||
int powernv_hwrng_present(void);
|
||||
int powernv_get_random_long(unsigned long *v);
|
||||
int powernv_get_random_real_mode(unsigned long *v);
|
||||
#else
|
||||
static inline int powernv_hwrng_present(void) { return 0; }
|
||||
static inline int powernv_get_random_real_mode(unsigned long *v) { return 0; }
|
||||
#endif
|
||||
|
||||
#endif /* _ASM_POWERPC_ARCHRANDOM_H */
|
||||
|
||||
@@ -48,10 +48,11 @@ static inline int arch_spin_is_locked(arch_spinlock_t *lock)
|
||||
static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock)
|
||||
{
|
||||
unsigned long tmp, token;
|
||||
unsigned int eh = IS_ENABLED(CONFIG_PPC64);
|
||||
|
||||
token = LOCK_TOKEN;
|
||||
__asm__ __volatile__(
|
||||
"1: lwarx %0,0,%2,1\n\
|
||||
"1: lwarx %0,0,%2,%[eh]\n\
|
||||
cmpwi 0,%0,0\n\
|
||||
bne- 2f\n\
|
||||
stwcx. %1,0,%2\n\
|
||||
@@ -59,7 +60,7 @@ static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock)
|
||||
PPC_ACQUIRE_BARRIER
|
||||
"2:"
|
||||
: "=&r" (tmp)
|
||||
: "r" (token), "r" (&lock->slock)
|
||||
: "r" (token), "r" (&lock->slock), [eh] "n" (eh)
|
||||
: "cr0", "memory");
|
||||
|
||||
return tmp;
|
||||
@@ -177,9 +178,10 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
|
||||
static inline long __arch_read_trylock(arch_rwlock_t *rw)
|
||||
{
|
||||
long tmp;
|
||||
unsigned int eh = IS_ENABLED(CONFIG_PPC64);
|
||||
|
||||
__asm__ __volatile__(
|
||||
"1: lwarx %0,0,%1,1\n"
|
||||
"1: lwarx %0,0,%1,%[eh]\n"
|
||||
__DO_SIGN_EXTEND
|
||||
" addic. %0,%0,1\n\
|
||||
ble- 2f\n"
|
||||
@@ -187,7 +189,7 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
|
||||
bne- 1b\n"
|
||||
PPC_ACQUIRE_BARRIER
|
||||
"2:" : "=&r" (tmp)
|
||||
: "r" (&rw->lock)
|
||||
: "r" (&rw->lock), [eh] "n" (eh)
|
||||
: "cr0", "xer", "memory");
|
||||
|
||||
return tmp;
|
||||
@@ -200,17 +202,18 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
|
||||
static inline long __arch_write_trylock(arch_rwlock_t *rw)
|
||||
{
|
||||
long tmp, token;
|
||||
unsigned int eh = IS_ENABLED(CONFIG_PPC64);
|
||||
|
||||
token = WRLOCK_TOKEN;
|
||||
__asm__ __volatile__(
|
||||
"1: lwarx %0,0,%2,1\n\
|
||||
"1: lwarx %0,0,%2,%[eh]\n\
|
||||
cmpwi 0,%0,0\n\
|
||||
bne- 2f\n"
|
||||
" stwcx. %1,0,%2\n\
|
||||
bne- 1b\n"
|
||||
PPC_ACQUIRE_BARRIER
|
||||
"2:" : "=&r" (tmp)
|
||||
: "r" (token), "r" (&rw->lock)
|
||||
: "r" (token), "r" (&rw->lock), [eh] "n" (eh)
|
||||
: "cr0", "memory");
|
||||
|
||||
return tmp;
|
||||
|
||||
@@ -20,6 +20,7 @@ CFLAGS_prom.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
|
||||
CFLAGS_prom_init.o += -fno-stack-protector
|
||||
CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING
|
||||
CFLAGS_prom_init.o += -ffreestanding
|
||||
CFLAGS_prom_init.o += $(call cc-option, -ftrivial-auto-var-init=uninitialized)
|
||||
|
||||
ifdef CONFIG_FUNCTION_TRACER
|
||||
# Do not trace early boot code
|
||||
|
||||
@@ -776,6 +776,11 @@ bool iommu_table_in_use(struct iommu_table *tbl)
|
||||
/* ignore reserved bit0 */
|
||||
if (tbl->it_offset == 0)
|
||||
start = 1;
|
||||
|
||||
/* Simple case with no reserved MMIO32 region */
|
||||
if (!tbl->it_reserved_start && !tbl->it_reserved_end)
|
||||
return find_next_bit(tbl->it_map, tbl->it_size, start) != tbl->it_size;
|
||||
|
||||
end = tbl->it_reserved_start - tbl->it_offset;
|
||||
if (find_next_bit(tbl->it_map, end, start) != end)
|
||||
return true;
|
||||
|
||||
@@ -74,16 +74,32 @@ void set_pci_dma_ops(const struct dma_map_ops *dma_ops)
|
||||
static int get_phb_number(struct device_node *dn)
|
||||
{
|
||||
int ret, phb_id = -1;
|
||||
u32 prop_32;
|
||||
u64 prop;
|
||||
|
||||
/*
|
||||
* Try fixed PHB numbering first, by checking archs and reading
|
||||
* the respective device-tree properties. Firstly, try powernv by
|
||||
* reading "ibm,opal-phbid", only present in OPAL environment.
|
||||
* the respective device-tree properties. Firstly, try reading
|
||||
* standard "linux,pci-domain", then try reading "ibm,opal-phbid"
|
||||
* (only present in powernv OPAL environment), then try device-tree
|
||||
* alias and as the last try to use lower bits of "reg" property.
|
||||
*/
|
||||
ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
|
||||
ret = of_get_pci_domain_nr(dn);
|
||||
if (ret >= 0) {
|
||||
prop = ret;
|
||||
ret = 0;
|
||||
}
|
||||
if (ret)
|
||||
ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
|
||||
|
||||
if (ret) {
|
||||
ret = of_alias_get_id(dn, "pci");
|
||||
if (ret >= 0) {
|
||||
prop = ret;
|
||||
ret = 0;
|
||||
}
|
||||
}
|
||||
if (ret) {
|
||||
u32 prop_32;
|
||||
ret = of_property_read_u32_index(dn, "reg", 1, &prop_32);
|
||||
prop = prop_32;
|
||||
}
|
||||
@@ -95,10 +111,7 @@ static int get_phb_number(struct device_node *dn)
|
||||
if ((phb_id >= 0) && !test_and_set_bit(phb_id, phb_bitmap))
|
||||
return phb_id;
|
||||
|
||||
/*
|
||||
* If not pseries nor powernv, or if fixed PHB numbering tried to add
|
||||
* the same PHB number twice, then fallback to dynamic PHB numbering.
|
||||
*/
|
||||
/* If everything fails then fallback to dynamic PHB numbering. */
|
||||
phb_id = find_first_zero_bit(phb_bitmap, MAX_PHBS);
|
||||
BUG_ON(phb_id >= MAX_PHBS);
|
||||
set_bit(phb_id, phb_bitmap);
|
||||
|
||||
@@ -20,7 +20,7 @@
|
||||
#include <asm/interrupt.h>
|
||||
#include <asm/kvm_ppc.h>
|
||||
#include <asm/kvm_book3s.h>
|
||||
#include <asm/archrandom.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/xics.h>
|
||||
#include <asm/xive.h>
|
||||
#include <asm/dbell.h>
|
||||
@@ -177,13 +177,14 @@ EXPORT_SYMBOL_GPL(kvmppc_hcall_impl_hv_realmode);
|
||||
|
||||
int kvmppc_hwrng_present(void)
|
||||
{
|
||||
return powernv_hwrng_present();
|
||||
return ppc_md.get_random_seed != NULL;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(kvmppc_hwrng_present);
|
||||
|
||||
long kvmppc_rm_h_random(struct kvm_vcpu *vcpu)
|
||||
{
|
||||
if (powernv_get_random_real_mode(&vcpu->arch.regs.gpr[4]))
|
||||
if (ppc_md.get_random_seed &&
|
||||
ppc_md.get_random_seed(&vcpu->arch.regs.gpr[4]))
|
||||
return H_SUCCESS;
|
||||
|
||||
return H_HARDWARE;
|
||||
|
||||
@@ -183,8 +183,8 @@ void mmu_mark_initmem_nx(void)
|
||||
unsigned long boundary = strict_kernel_rwx_enabled() ? sinittext : etext8;
|
||||
unsigned long einittext8 = ALIGN(__pa(_einittext), SZ_8M);
|
||||
|
||||
mmu_mapin_ram_chunk(0, boundary, PAGE_KERNEL_TEXT, false);
|
||||
mmu_mapin_ram_chunk(boundary, einittext8, PAGE_KERNEL, false);
|
||||
if (!debug_pagealloc_enabled_or_kfence())
|
||||
mmu_mapin_ram_chunk(boundary, einittext8, PAGE_KERNEL, false);
|
||||
|
||||
mmu_pin_tlb(block_mapped_ram, false);
|
||||
}
|
||||
|
||||
@@ -138,9 +138,9 @@ void mark_initmem_nx(void)
|
||||
unsigned long numpages = PFN_UP((unsigned long)_einittext) -
|
||||
PFN_DOWN((unsigned long)_sinittext);
|
||||
|
||||
if (v_block_mapped((unsigned long)_sinittext)) {
|
||||
mmu_mark_initmem_nx();
|
||||
} else {
|
||||
mmu_mark_initmem_nx();
|
||||
|
||||
if (!v_block_mapped((unsigned long)_sinittext)) {
|
||||
set_memory_nx((unsigned long)_sinittext, numpages);
|
||||
set_memory_rw((unsigned long)_sinittext, numpages);
|
||||
}
|
||||
|
||||
@@ -17,9 +17,9 @@ static const struct flag_info flag_array[] = {
|
||||
.clear = " ",
|
||||
}, {
|
||||
.mask = _PAGE_RW,
|
||||
.val = _PAGE_RW,
|
||||
.set = "rw",
|
||||
.clear = "r ",
|
||||
.val = 0,
|
||||
.set = "r ",
|
||||
.clear = "rw",
|
||||
}, {
|
||||
.mask = _PAGE_EXEC,
|
||||
.val = _PAGE_EXEC,
|
||||
|
||||
@@ -1320,27 +1320,22 @@ static void power_pmu_disable(struct pmu *pmu)
|
||||
* a PMI happens during interrupt replay and perf counter
|
||||
* values are cleared by PMU callbacks before replay.
|
||||
*
|
||||
* If any PMC corresponding to the active PMU events are
|
||||
* overflown, disable the interrupt by clearing the paca
|
||||
* bit for PMI since we are disabling the PMU now.
|
||||
* Otherwise provide a warning if there is PMI pending, but
|
||||
* no counter is found overflown.
|
||||
* Disable the interrupt by clearing the paca bit for PMI
|
||||
* since we are disabling the PMU now. Otherwise provide a
|
||||
* warning if there is PMI pending, but no counter is found
|
||||
* overflown.
|
||||
*
|
||||
* Since power_pmu_disable runs under local_irq_save, it
|
||||
* could happen that code hits a PMC overflow without PMI
|
||||
* pending in paca. Hence only clear PMI pending if it was
|
||||
* set.
|
||||
*
|
||||
* If a PMI is pending, then MSR[EE] must be disabled (because
|
||||
* the masked PMI handler disabling EE). So it is safe to
|
||||
* call clear_pmi_irq_pending().
|
||||
*/
|
||||
if (any_pmc_overflown(cpuhw)) {
|
||||
/*
|
||||
* Since power_pmu_disable runs under local_irq_save, it
|
||||
* could happen that code hits a PMC overflow without PMI
|
||||
* pending in paca. Hence only clear PMI pending if it was
|
||||
* set.
|
||||
*
|
||||
* If a PMI is pending, then MSR[EE] must be disabled (because
|
||||
* the masked PMI handler disabling EE). So it is safe to
|
||||
* call clear_pmi_irq_pending().
|
||||
*/
|
||||
if (pmi_irq_pending())
|
||||
clear_pmi_irq_pending();
|
||||
} else
|
||||
WARN_ON(pmi_irq_pending());
|
||||
if (pmi_irq_pending())
|
||||
clear_pmi_irq_pending();
|
||||
|
||||
val = mmcra = cpuhw->mmcr.mmcra;
|
||||
|
||||
|
||||
@@ -170,11 +170,11 @@ config POWER9_CPU
|
||||
|
||||
config E5500_CPU
|
||||
bool "Freescale e5500"
|
||||
depends on E500
|
||||
depends on PPC64 && E500
|
||||
|
||||
config E6500_CPU
|
||||
bool "Freescale e6500"
|
||||
depends on E500
|
||||
depends on PPC64 && E500
|
||||
|
||||
config 860_CPU
|
||||
bool "8xx family"
|
||||
|
||||
@@ -226,6 +226,7 @@ static int setup_msi_msg_address(struct pci_dev *dev, struct msi_msg *msg)
|
||||
if (!prop) {
|
||||
dev_dbg(&dev->dev,
|
||||
"axon_msi: no msi-address-(32|64) properties found\n");
|
||||
of_node_put(dn);
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
|
||||
@@ -659,6 +659,7 @@ spufs_init_isolated_loader(void)
|
||||
return;
|
||||
|
||||
loader = of_get_property(dn, "loader", &size);
|
||||
of_node_put(dn);
|
||||
if (!loader)
|
||||
return;
|
||||
|
||||
|
||||
@@ -29,15 +29,6 @@ struct powernv_rng {
|
||||
|
||||
static DEFINE_PER_CPU(struct powernv_rng *, powernv_rng);
|
||||
|
||||
int powernv_hwrng_present(void)
|
||||
{
|
||||
struct powernv_rng *rng;
|
||||
|
||||
rng = get_cpu_var(powernv_rng);
|
||||
put_cpu_var(rng);
|
||||
return rng != NULL;
|
||||
}
|
||||
|
||||
static unsigned long rng_whiten(struct powernv_rng *rng, unsigned long val)
|
||||
{
|
||||
unsigned long parity;
|
||||
@@ -58,17 +49,6 @@ static unsigned long rng_whiten(struct powernv_rng *rng, unsigned long val)
|
||||
return val;
|
||||
}
|
||||
|
||||
int powernv_get_random_real_mode(unsigned long *v)
|
||||
{
|
||||
struct powernv_rng *rng;
|
||||
|
||||
rng = raw_cpu_read(powernv_rng);
|
||||
|
||||
*v = rng_whiten(rng, __raw_rm_readq(rng->regs_real));
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int powernv_get_random_darn(unsigned long *v)
|
||||
{
|
||||
unsigned long val;
|
||||
@@ -105,12 +85,14 @@ int powernv_get_random_long(unsigned long *v)
|
||||
{
|
||||
struct powernv_rng *rng;
|
||||
|
||||
rng = get_cpu_var(powernv_rng);
|
||||
|
||||
*v = rng_whiten(rng, in_be64(rng->regs));
|
||||
|
||||
put_cpu_var(rng);
|
||||
|
||||
if (mfmsr() & MSR_DR) {
|
||||
rng = get_cpu_var(powernv_rng);
|
||||
*v = rng_whiten(rng, in_be64(rng->regs));
|
||||
put_cpu_var(rng);
|
||||
} else {
|
||||
rng = raw_cpu_read(powernv_rng);
|
||||
*v = rng_whiten(rng, __raw_rm_readq(rng->regs_real));
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(powernv_get_random_long);
|
||||
|
||||
@@ -520,6 +520,7 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)
|
||||
struct resource rsrc;
|
||||
const int *bus_range;
|
||||
u8 hdr_type, progif;
|
||||
u32 class_code;
|
||||
struct device_node *dev;
|
||||
struct ccsr_pci __iomem *pci;
|
||||
u16 temp;
|
||||
@@ -593,6 +594,13 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)
|
||||
PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
|
||||
if (fsl_pcie_check_link(hose))
|
||||
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
|
||||
/* Fix Class Code to PCI_CLASS_BRIDGE_PCI_NORMAL for pre-3.0 controller */
|
||||
if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) {
|
||||
early_read_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, &class_code);
|
||||
class_code &= 0xff;
|
||||
class_code |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8;
|
||||
early_write_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, class_code);
|
||||
}
|
||||
} else {
|
||||
/*
|
||||
* Set PBFR(PCI Bus Function Register)[10] = 1 to
|
||||
|
||||
@@ -18,6 +18,7 @@ struct platform_device;
|
||||
|
||||
#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */
|
||||
#define PCIE_LTSSM_L0 0x16 /* L0 state */
|
||||
#define PCIE_FSL_CSR_CLASSCODE 0x474 /* FSL GPEX CSR */
|
||||
#define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */
|
||||
#define PCIE_IP_REV_3_0 0x02080300 /* PCIE IP block version Rev3.0 */
|
||||
#define PIWAR_EN 0x80000000 /* Enable */
|
||||
|
||||
@@ -716,6 +716,7 @@ static bool xive_get_max_prio(u8 *max_prio)
|
||||
}
|
||||
|
||||
reg = of_get_property(rootdn, "ibm,plat-res-int-priorities", &len);
|
||||
of_node_put(rootdn);
|
||||
if (!reg) {
|
||||
pr_err("Failed to read 'ibm,plat-res-int-priorities' property\n");
|
||||
return false;
|
||||
|
||||
@@ -44,7 +44,7 @@ SYM_CODE_START(riscv_crash_save_regs)
|
||||
REG_S t6, PT_T6(a0) /* x31 */
|
||||
|
||||
csrr t1, CSR_STATUS
|
||||
csrr t2, CSR_EPC
|
||||
auipc t2, 0x0
|
||||
csrr t3, CSR_TVAL
|
||||
csrr t4, CSR_CAUSE
|
||||
|
||||
|
||||
@@ -138,19 +138,37 @@ void machine_shutdown(void)
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Override the weak function in kernel/panic.c */
|
||||
void crash_smp_send_stop(void)
|
||||
{
|
||||
static int cpus_stopped;
|
||||
|
||||
/*
|
||||
* This function can be called twice in panic path, but obviously
|
||||
* we execute this only once.
|
||||
*/
|
||||
if (cpus_stopped)
|
||||
return;
|
||||
|
||||
smp_send_stop();
|
||||
cpus_stopped = 1;
|
||||
}
|
||||
|
||||
/*
|
||||
* machine_crash_shutdown - Prepare to kexec after a kernel crash
|
||||
*
|
||||
* This function is called by crash_kexec just before machine_kexec
|
||||
* below and its goal is similar to machine_shutdown, but in case of
|
||||
* a kernel crash. Since we don't handle such cases yet, this function
|
||||
* is empty.
|
||||
* and its goal is to shutdown non-crashing cpus and save registers.
|
||||
*/
|
||||
void
|
||||
machine_crash_shutdown(struct pt_regs *regs)
|
||||
{
|
||||
local_irq_disable();
|
||||
|
||||
/* shutdown non-crashing cpus */
|
||||
crash_smp_send_stop();
|
||||
|
||||
crash_save_cpu(regs, smp_processor_id());
|
||||
machine_shutdown();
|
||||
pr_info("Starting crashdump kernel...\n");
|
||||
}
|
||||
|
||||
@@ -171,7 +189,7 @@ machine_kexec(struct kimage *image)
|
||||
struct kimage_arch *internal = &image->arch;
|
||||
unsigned long jump_addr = (unsigned long) image->start;
|
||||
unsigned long first_ind_entry = (unsigned long) &image->head;
|
||||
unsigned long this_cpu_id = smp_processor_id();
|
||||
unsigned long this_cpu_id = __smp_processor_id();
|
||||
unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
|
||||
unsigned long fdt_addr = internal->fdt_addr;
|
||||
void *control_code_buffer = page_address(image->control_code_page);
|
||||
|
||||
@@ -59,8 +59,6 @@ int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
||||
|
||||
instruction_pointer_set(regs, utask->xol_vaddr);
|
||||
|
||||
regs->status &= ~SR_SPIE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@@ -72,8 +70,6 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
||||
|
||||
instruction_pointer_set(regs, utask->vaddr + auprobe->insn_size);
|
||||
|
||||
regs->status |= SR_SPIE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@@ -111,8 +107,6 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
|
||||
* address.
|
||||
*/
|
||||
instruction_pointer_set(regs, utask->vaddr);
|
||||
|
||||
regs->status &= ~SR_SPIE;
|
||||
}
|
||||
|
||||
bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
|
||||
|
||||
@@ -12,7 +12,7 @@ static void default_power_off(void)
|
||||
wait_for_interrupt();
|
||||
}
|
||||
|
||||
void (*pm_power_off)(void) = default_power_off;
|
||||
void (*pm_power_off)(void) = NULL;
|
||||
EXPORT_SYMBOL(pm_power_off);
|
||||
|
||||
void machine_restart(char *cmd)
|
||||
@@ -23,10 +23,16 @@ void machine_restart(char *cmd)
|
||||
|
||||
void machine_halt(void)
|
||||
{
|
||||
pm_power_off();
|
||||
if (pm_power_off != NULL)
|
||||
pm_power_off();
|
||||
else
|
||||
default_power_off();
|
||||
}
|
||||
|
||||
void machine_power_off(void)
|
||||
{
|
||||
pm_power_off();
|
||||
if (pm_power_off != NULL)
|
||||
pm_power_off();
|
||||
else
|
||||
default_power_off();
|
||||
}
|
||||
|
||||
@@ -100,6 +100,10 @@ static void __init print_vm_layout(void)
|
||||
(unsigned long)VMEMMAP_END);
|
||||
print_mlm("vmalloc", (unsigned long)VMALLOC_START,
|
||||
(unsigned long)VMALLOC_END);
|
||||
#ifdef CONFIG_64BIT
|
||||
print_mlm("modules", (unsigned long)MODULES_VADDR,
|
||||
(unsigned long)MODULES_END);
|
||||
#endif
|
||||
print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
|
||||
(unsigned long)high_memory);
|
||||
#ifdef CONFIG_64BIT
|
||||
|
||||
@@ -72,8 +72,17 @@ static __always_inline void __ctl_clear_bit(unsigned int cr, unsigned int bit)
|
||||
__ctl_load(reg, cr, cr);
|
||||
}
|
||||
|
||||
void smp_ctl_set_bit(int cr, int bit);
|
||||
void smp_ctl_clear_bit(int cr, int bit);
|
||||
void smp_ctl_set_clear_bit(int cr, int bit, bool set);
|
||||
|
||||
static inline void ctl_set_bit(int cr, int bit)
|
||||
{
|
||||
smp_ctl_set_clear_bit(cr, bit, true);
|
||||
}
|
||||
|
||||
static inline void ctl_clear_bit(int cr, int bit)
|
||||
{
|
||||
smp_ctl_set_clear_bit(cr, bit, false);
|
||||
}
|
||||
|
||||
union ctlreg0 {
|
||||
unsigned long val;
|
||||
@@ -128,8 +137,5 @@ union ctlreg15 {
|
||||
};
|
||||
};
|
||||
|
||||
#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
|
||||
#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ASM_CTL_REG_H */
|
||||
|
||||
@@ -148,4 +148,6 @@ void gmap_sync_dirty_log_pmd(struct gmap *gmap, unsigned long dirty_bitmap[4],
|
||||
unsigned long gaddr, unsigned long vmaddr);
|
||||
int gmap_mark_unmergeable(void);
|
||||
void s390_reset_acc(struct mm_struct *mm);
|
||||
void s390_unlist_old_asce(struct gmap *gmap);
|
||||
int s390_replace_asce(struct gmap *gmap);
|
||||
#endif /* _ASM_S390_GMAP_H */
|
||||
|
||||
@@ -39,7 +39,7 @@ u32 os_info_csum(struct os_info *os_info);
|
||||
|
||||
#ifdef CONFIG_CRASH_DUMP
|
||||
void *os_info_old_entry(int nr, unsigned long *size);
|
||||
int copy_oldmem_kernel(void *dst, void *src, size_t count);
|
||||
int copy_oldmem_kernel(void *dst, unsigned long src, size_t count);
|
||||
#else
|
||||
static inline void *os_info_old_entry(int nr, unsigned long *size)
|
||||
{
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user