Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

 - Lots of cleanups and improvements to the Intel drivers,
   including some new systems support.
 - New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
   Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
   Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.

Documentation/ABI/testing/sysfs-ptp

@@ -33,6 +33,13 @@ Description:
 		frequency adjustment value (a positive integer) in
 		parts per billion.
 
+What:		/sys/class/ptp/ptpN/max_vclocks
+Date:		May 2021
+Contact:	Yangbo Lu <yangbo.lu@nxp.com>
+Description:
+		This file contains the maximum number of ptp vclocks.
+		Write integer to re-configure it.
+
 What:		/sys/class/ptp/ptpN/n_alarms
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
@@ -61,6 +68,19 @@ Description:
 		This file contains the number of programmable pins
 		offered by the PTP hardware clock.
 
+What:		/sys/class/ptp/ptpN/n_vclocks
+Date:		May 2021
+Contact:	Yangbo Lu <yangbo.lu@nxp.com>
+Description:
+		This file contains the number of virtual PTP clocks in
+		use.  By default, the value is 0 meaning that only the
+		physical clock is in use.  Setting the value creates
+		the corresponding number of virtual clocks and causes
+		the physical clock to become free running.  Setting the
+		value back to 0 deletes the virtual clocks and
+		switches the physical clock back to normal, adjustable
+		operation.
+
 What:		/sys/class/ptp/ptpN/pins
 Date:		March 2014
 Contact:	Richard Cochran <richardcochran@gmail.com>

Documentation/arm64/tagged-address-abi.rst

@@ -45,14 +45,24 @@ how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
+   tagged pointers in this context is allowed with these exceptions:
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
 
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mremap()`` as these have the potential to alias with existing
-   ``mmap()`` and ``mremap()`` system calls.
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to

Documentation/bpf/libbpf/libbpf_naming_convention.rst

@@ -108,7 +108,7 @@ This bump in ABI version is at most once per kernel development cycle.
 
 For example, if current state of ``libbpf.map`` is:
 
-.. code-block:: c
+.. code-block:: none
 
         LIBBPF_0.0.1 {
         	global:
@@ -121,7 +121,7 @@ For example, if current state of ``libbpf.map`` is:
 , and a new symbol ``bpf_func_c`` is being introduced, then
 ``libbpf.map`` should be changed like this:
 
-.. code-block:: c
+.. code-block:: none
 
         LIBBPF_0.0.1 {
         	global:

Documentation/dev-tools/kunit/running_tips.rst

@@ -86,19 +86,7 @@ Generating code coverage reports under UML
 .. note::
 	TODO(brendanhiggins@google.com): There are various issues with UML and
 	versions of gcc 7 and up. You're likely to run into missing ``.gcda``
-	files or compile errors. We know one `faulty GCC commit
+	files or compile errors.
-	<https://github.com/gcc-mirror/gcc/commit/8c9434c2f9358b8b8bad2c1990edf10a21645f9d>`_
-	but not how we'd go about getting this fixed. The compile errors still
-	need some investigation.
-
-.. note::
-	TODO(brendanhiggins@google.com): for recent versions of Linux
-	(5.10-5.12, maybe earlier), there's a bug with gcov counters not being
-	flushed in UML. This translates to very low (<1%) reported coverage. This is
-	related to the above issue and can be worked around by replacing the
-	one call to ``uml_abort()`` (it's in ``os_dump_core()``) with a plain
-	``exit()``.
-
 
 This is different from the "normal" way of getting coverage information that is
 documented in Documentation/dev-tools/gcov.rst.

Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml

@@ -50,7 +50,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 3
     items:
       - description: base register
       - description: power register

Documentation/devicetree/bindings/display/renesas,du.yaml

@@ -92,7 +92,6 @@ required:
   - reg
   - clocks
   - interrupts
-  - resets
   - ports
 
 allOf:

Documentation/devicetree/bindings/hwmon/adt7475.yaml

@@ -39,17 +39,7 @@ properties:
   reg:
     maxItems: 1
 
-patternProperties:
+  adi,pwm-active-state:
-  "^adi,bypass-attenuator-in[0-4]$":
-    description: |
-      Configures bypassing the individual voltage input attenuator. If
-      set to 1 the attenuator is bypassed if set to 0 the attenuator is
-      not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1]
-
-  "^adi,pwm-active-state$":
     description: |
       Integer array, represents the active state of the pwm outputs If set to 0
       the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
@@ -61,6 +51,16 @@ patternProperties:
       enum: [0, 1]
       default: 1
 
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/iio/st,st-sensors.yaml

@@ -152,47 +152,6 @@ allOf:
           maxItems: 1
         st,drdy-int-pin: false
 
-  - if:
-      properties:
-        compatible:
-          enum:
-            # Two intertial interrupts i.e. accelerometer/gyro interrupts
-            - st,h3lis331dl-accel
-            - st,l3g4200d-gyro
-            - st,l3g4is-gyro
-            - st,l3gd20-gyro
-            - st,l3gd20h-gyro
-            - st,lis2de12
-            - st,lis2dw12
-            - st,lis2hh12
-            - st,lis2dh12-accel
-            - st,lis331dl-accel
-            - st,lis331dlh-accel
-            - st,lis3de
-            - st,lis3dh-accel
-            - st,lis3dhh
-            - st,lis3mdl-magn
-            - st,lng2dm-accel
-            - st,lps331ap-press
-            - st,lsm303agr-accel
-            - st,lsm303dlh-accel
-            - st,lsm303dlhc-accel
-            - st,lsm303dlm-accel
-            - st,lsm330-accel
-            - st,lsm330-gyro
-            - st,lsm330d-accel
-            - st,lsm330d-gyro
-            - st,lsm330dl-accel
-            - st,lsm330dl-gyro
-            - st,lsm330dlc-accel
-            - st,lsm330dlc-gyro
-            - st,lsm9ds0-gyro
-            - st,lsm9ds1-magn
-    then:
-      properties:
-        interrupts:
-          maxItems: 2
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

@@ -52,16 +52,14 @@ properties:
         items:
           - const: marvell,ap806-smmu-500
           - const: arm,mmu-500
-      - description: NVIDIA SoCs that program two ARM MMU-500s identically
-        items:
       - description: NVIDIA SoCs that require memory controller interaction
           and may program multiple ARM MMU-500s identically with the memory
           controller interleaving translations between multiple instances
           for improved performance.
         items:
           - enum:
-              - const: nvidia,tegra194-smmu
+              - nvidia,tegra194-smmu
-              - const: nvidia,tegra186-smmu
+              - nvidia,tegra186-smmu
           - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500

Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml

@@ -28,14 +28,12 @@ properties:
       - description: configuration registers for MMU instance 0
       - description: configuration registers for MMU instance 1
     minItems: 1
-    maxItems: 2
 
   interrupts:
     items:
       - description: interruption for MMU instance 0
       - description: interruption for MMU instance 1
     minItems: 1
-    maxItems: 2
 
   clocks:
     items:

Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml

@@ -57,7 +57,6 @@ properties:
 
   ranges:
     minItems: 1
-    maxItems: 3
     description: |
       Memory bus areas for interacting with the devices. Reflects
       the memory layout with four integer values following:

Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml

@@ -84,7 +84,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
     items:
       - description: NAND CTLRDY interrupt
       - description: FLASH_DMA_DONE if flash DMA is available
@@ -92,7 +91,6 @@ properties:
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
     items:
       - const: nand_ctlrdy
       - const: flash_dma_done
@@ -148,8 +146,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: nand
             - const: nand-int-base
@@ -161,8 +157,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 3
-          maxItems: 3
           items:
             - const: nand
             - const: nand-int-base
@@ -175,8 +169,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 3
-          maxItems: 3
           items:
             - const: nand
             - const: iproc-idm

Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml

@@ -67,8 +67,8 @@ properties:
           reg:
             oneOf:
               - enum:
-                - 0
+                  - 0
-                - 1
+                  - 1
 
         required:
           - compatible

Documentation/devicetree/bindings/net/gpmc-eth.txt

@@ -13,7 +13,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
 
 For the properties relevant to the ethernet controller connected to the GPMC
 refer to the binding documentation of the device. For example, the documentation
-for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
+for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml
 
 Child nodes need to specify the GPMC bus address width using the "bank-width"
 property but is possible that an ethernet controller also has a property to

Documentation/devicetree/bindings/net/imx-dwmac.txt

@@ -1,56 +0,0 @@
-IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
-
-This file documents platform glue layer for IMX.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
-	       and "snps,dwmac-5.10a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "pclk" for the MAC apb clock.
-	       Should be "ptp_ref" for the MAC timer clock.
-	       Should be "tx" for the MAC RGMII TX clock:
-	       Should be "mem" for EQOS MEM clock.
-		- "mem" clock is required for imx8dxl platform.
-		- "mem" clock is not required for imx8mp platform.
-- interrupt-names: Should contain a list of interrupt names corresponding to
-		   the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
-- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
-	     encompases the GPR register, and the offset of the GPR register.
-		- required for imx8mp platform.
-		- is optional for imx8dxl platform.
-
-Optional properties:
-- intf_mode: is optional for imx8dxl platform.
-- snps,rmii_refclk_ext: to select RMII reference clock from external.
-
-Example:
-	eqos: ethernet@30bf0000 {
-		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
-		reg = <0x30bf0000 0x10000>;
-		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
-		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
-			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
-			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-			 <&clk IMX8MP_CLK_ENET_QOS>;
-		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
-		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
-				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-				  <&clk IMX8MP_CLK_ENET_QOS>;
-		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
-					 <&clk IMX8MP_SYS_PLL2_100M>,
-					 <&clk IMX8MP_SYS_PLL2_125M>;
-		assigned-clock-rates = <0>, <100000000>, <125000000>;
-		nvmem-cells = <&eth_mac0>;
-		nvmem-cell-names = "mac-address";
-		nvmem_macaddr_swap;
-		intf_mode = <&gpr 0x4>;
-		status = "disabled";
-	};

Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@30bf0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+            status = "disabled";
+    };

Documentation/devicetree/bindings/net/smsc,lan9115.yaml

@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: smsc,lan9115
+      - items:
+          - enum:
+              - smsc,lan89218
+              - smsc,lan9117
+              - smsc,lan9118
+              - smsc,lan9220
+              - smsc,lan9221
+          - const: smsc,lan9115
+
+  reg:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 2, 4 ]
+    default: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description:
+          LAN interrupt line
+      - description:
+          Optional PME (power management event) interrupt that is able to wake
+          up the host system with a 50ms pulse on network activity
+
+  clocks:
+    maxItems: 1
+
+  phy-mode: true
+
+  smsc,irq-active-high:
+    type: boolean
+    description: Indicates the IRQ polarity is active-high
+
+  smsc,irq-push-pull:
+    type: boolean
+    description: Indicates the IRQ type is push-pull
+
+  smsc,force-internal-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use internal PHY
+
+  smsc,force-external-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use external PHY
+
+  smsc,save-mac-address:
+    type: boolean
+    description:
+      Indicates that MAC address needs to be saved before resetting the
+      controller
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      On many systems this is wired high so the device goes out of reset at
+      power-on, but if it is under program control, this optional GPIO can
+      wake up in response to it.
+
+  vdd33a-supply:
+    description: 3.3V analog power supply
+
+  vddvario-supply:
+    description: IO logic power supply
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
+# "gpmc,*", ...) to be found, that actually depend on the compatible value of
+# the parent node.
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet@f4000000 {
+            compatible = "smsc,lan9220", "smsc,lan9115";
+            reg = <0xf4000000 0x2000000>;
+            phy-mode = "mii";
+            interrupt-parent = <&gpio1>;
+            interrupts = <31>, <32>;
+            reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+            reg-io-width = <4>;
+            smsc,irq-push-pull;
+    };

Documentation/devicetree/bindings/net/smsc911x.txt

@@ -1,43 +0,0 @@
-* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
-
-Required properties:
-- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
-- reg : Address and length of the io space for SMSC LAN
-- interrupts : one or two interrupt specifiers
-  - The first interrupt is the SMSC LAN interrupt line
-  - The second interrupt (if present) is the PME (power
-    management event) interrupt that is able to wake up the host
-     system with a 50ms pulse on network activity
-- phy-mode : See ethernet.txt file in the same directory
-
-Optional properties:
-- reg-shift : Specify the quantity to shift the register offsets by
-- reg-io-width : Specify the size (in bytes) of the IO accesses that
-  should be performed on the device.  Valid value for SMSC LAN is
-  2 or 4.  If it's omitted or invalid, the size would be 2.
-- smsc,irq-active-high : Indicates the IRQ polarity is active-high
-- smsc,irq-push-pull : Indicates the IRQ type is push-pull
-- smsc,force-internal-phy : Forces SMSC LAN controller to use
-  internal PHY
-- smsc,force-external-phy : Forces SMSC LAN controller to use
-  external PHY
-- smsc,save-mac-address : Indicates that mac address needs to be saved
-  before resetting the controller
-- reset-gpios : a GPIO line connected to the RESET (active low) signal
-  of the device. On many systems this is wired high so the device goes
-  out of reset at power-on, but if it is under program control, this
-  optional GPIO can wake up in response to it.
-- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
-
-Examples:
-
-lan9220@f4000000 {
-	compatible = "smsc,lan9220", "smsc,lan9115";
-	reg = <0xf4000000 0x2000000>;
-	phy-mode = "mii";
-	interrupt-parent = <&gpio1>;
-	interrupts = <31>, <32>;
-	reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	reg-io-width = <4>;
-	smsc,irq-push-pull;
-};

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -28,6 +28,7 @@ select:
           - snps,dwmac-4.00
           - snps,dwmac-4.10a
           - snps,dwmac-4.20a
+          - snps,dwmac-5.10a
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -82,6 +83,7 @@ properties:
         - snps,dwmac-4.00
         - snps,dwmac-4.10a
         - snps,dwmac-4.20a
+        - snps,dwmac-5.10a
         - snps,dwxgmac
         - snps,dwxgmac-2.10
 
@@ -375,6 +377,7 @@ allOf:
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
               - snps,dwmac-4.20a
+              - snps,dwmac-5.10a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -77,6 +77,34 @@ properties:
       Type-C spec states minimum CC pin debounce of 100 ms and maximum
       of 200 ms. However, some solutions might need more than 200 ms.
 
+  refclk-dig:
+    type: object
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 4
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
 patternProperties:
   "^pll[0|1]-refclk$":
     type: object
@@ -121,34 +149,6 @@ patternProperties:
       - clocks
       - "#clock-cells"
 
-  "^refclk-dig$":
-    type: object
-    description: |
-      WIZ node should have subnode for refclk_dig to select the reference
-      clock source for the reference clock used in the PHY and PMA digital
-      logic.
-    properties:
-      clocks:
-        minItems: 2
-        maxItems: 4
-        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
-          the inputs to refclk_dig
-
-      "#clock-cells":
-        const: 0
-
-      assigned-clocks:
-        maxItems: 1
-
-      assigned-clock-parents:
-        maxItems: 1
-
-    required:
-      - clocks
-      - "#clock-cells"
-      - assigned-clocks
-      - assigned-clock-parents
-
   "^serdes@[0-9a-f]+$":
     type: object
     description: |

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -57,12 +57,14 @@ properties:
     maxItems: 1
 
   power-domains:
+    deprecated: true
     description:
       Power domain to use for enable control. This binding is only
       available if the compatible is chosen to regulator-fixed-domain.
     maxItems: 1
 
   required-opps:
+    deprecated: true
     description:
       Performance state to use for enable control. This binding is only
       available if the compatible is chosen to regulator-fixed-domain. The

Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml

@@ -36,12 +36,12 @@ properties:
           switching frequency must be one of following corresponding value
           1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
 
-    patternProperties:
+      ldortc:
-      "^ldo[1-4]$":
         type: object
         $ref: regulator.yaml#
 
-      "^ldortc$":
+    patternProperties:
+      "^ldo[1-4]$":
         type: object
         $ref: regulator.yaml#
 

Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml

@@ -83,7 +83,8 @@ properties:
 
         unevaluatedProperties: false
 
-      "^vsnvs$":
+    properties:
+      vsnvs:
         type: object
         $ref: regulator.yaml#
         description:

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -24,10 +24,10 @@ allOf:
 select:
   properties:
     compatible:
-      items:
+      contains:
-        - enum:
+        enum:
-            - sifive,fu540-c000-ccache
+          - sifive,fu540-c000-ccache
-            - sifive,fu740-c000-ccache
+          - sifive,fu740-c000-ccache
 
   required:
     - compatible

Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml

@@ -30,7 +30,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
     items:
       - description: PCLK clocks
       - description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -6,6 +6,7 @@ Required properties:
 	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
 	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
 	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
+	"ti,omap4-mcasp-audio"	: for OMAP4
 
 - reg : Should contain reg specifiers for the entries in the reg-names property.
 - reg-names : Should contain:

Documentation/devicetree/bindings/sound/ics43432.txt

@@ -1,4 +1,4 @@
-Invensense ICS-43432 MEMS microphone with I2S output.
+Invensense ICS-43432-compatible MEMS microphone with I2S output.
 
 There are no software configuration options for this device, indeed, the only
 host connection is the I2S interface. Apart from requirements on clock
@@ -8,7 +8,9 @@ contain audio data. A hardware pin determines if the device outputs data
 on the left or right channel of the I2S frame.
 
 Required properties:
-  - compatible : Must be "invensense,ics43432"
+  - compatible: should be one of the following.
+     "invensense,ics43432": For the Invensense ICS43432
+     "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR
 
 Example:
 

Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml

@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8195
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8195-audio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 26M clock
+      - description: audio pll1 clock
+      - description: audio pll2 clock
+      - description: clock divider for i2si1_mck
+      - description: clock divider for i2si2_mck
+      - description: clock divider for i2so1_mck
+      - description: clock divider for i2so2_mck
+      - description: clock divider for dptx_mck
+      - description: a1sys hoping clock
+      - description: audio intbus clock
+      - description: audio hires clock
+      - description: audio local bus clock
+      - description: mux for dptx_mck
+      - description: mux for i2so1_mck
+      - description: mux for i2so2_mck
+      - description: mux for i2si1_mck
+      - description: mux for i2si2_mck
+      - description: audio infra 26M clock
+      - description: infra bus clock
+
+  clock-names:
+    items:
+      - const: clk26m
+      - const: apll1_ck
+      - const: apll2_ck
+      - const: apll12_div0
+      - const: apll12_div1
+      - const: apll12_div2
+      - const: apll12_div3
+      - const: apll12_div9
+      - const: a1sys_hp_sel
+      - const: aud_intbus_sel
+      - const: audio_h_sel
+      - const: audio_local_bus_sel
+      - const: dptx_m_sel
+      - const: i2so1_m_sel
+      - const: i2so2_m_sel
+      - const: i2si1_m_sel
+      - const: i2si2_m_sel
+      - const: infra_ao_audio_26m_b
+      - const: scp_adsp_audiodsp
+
+  mediatek,etdm-in1-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 24
+    description: Specify which input channel should be disabled.
+
+  mediatek,etdm-in2-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 16
+    description: Specify which input channel should be disabled.
+
+patternProperties:
+  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
+    description: Specify etdm in mclk output rate for always on case.
+
+  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
+    description: Specify etdm out mclk output rate for always on case.
+
+  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-in[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm in moudule.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+  "^mediatek,etdm-out[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm out moudule.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    afe: mt8195-afe-pcm@10890000 {
+        compatible = "mediatek,mt8195-audio";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>;
+        clocks = <&clk26m>,
+                 <&topckgen CLK_TOP_APLL1>,
+                 <&topckgen CLK_TOP_APLL2>,
+                 <&topckgen CLK_TOP_APLL12_DIV0>,
+                 <&topckgen CLK_TOP_APLL12_DIV1>,
+                 <&topckgen CLK_TOP_APLL12_DIV2>,
+                 <&topckgen CLK_TOP_APLL12_DIV3>,
+                 <&topckgen CLK_TOP_APLL12_DIV9>,
+                 <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+                 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+                 <&topckgen CLK_TOP_AUDIO_H_SEL>,
+                 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS_SEL>,
+                 <&topckgen CLK_TOP_DPTX_M_SEL>,
+                 <&topckgen CLK_TOP_I2SO1_M_SEL>,
+                 <&topckgen CLK_TOP_I2SO2_M_SEL>,
+                 <&topckgen CLK_TOP_I2SI1_M_SEL>,
+                 <&topckgen CLK_TOP_I2SI2_M_SEL>,
+                 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>,
+                 <&scp_adsp CLK_SCP_ADSP_AUDIODSP>;
+        clock-names = "clk26m",
+                      "apll1_ck",
+                      "apll2_ck",
+                      "apll12_div0",
+                      "apll12_div1",
+                      "apll12_div2",
+                      "apll12_div3",
+                      "apll12_div9",
+                      "a1sys_hp_sel",
+                      "aud_intbus_sel",
+                      "audio_h_sel",
+                      "audio_local_bus_sel",
+                      "dptx_m_sel",
+                      "i2so1_m_sel",
+                      "i2so2_m_sel",
+                      "i2si1_m_sel",
+                      "i2si2_m_sel",
+                      "infra_ao_audio_26m_b",
+                      "scp_adsp_audiodsp";
+    };
+
+...

Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1019-rt5682.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8195 with MT6359, RT1019 and RT5682 ASoC sound card driver
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+description:
+  This binding describes the MT8195 sound card.
+
+properties:
+  compatible:
+    const: mediatek,mt8195_mt6359_rt1019_rt5682
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ASoC platform.
+
+  mediatek,dptx-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 Display Port Tx codec node.
+
+  mediatek,hdmi-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 HDMI codec node.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+
+examples:
+  - |
+
+    sound: mt8195-sound {
+        compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+    };
+
+...

Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml

@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: realtek,rt1015p
+    enum:
+      - realtek,rt1015p
+      - realtek,rt1019p
 
   sdb-gpios:
     description:

Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml

@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L ASoC Sound Serial Interface (SSIF-2)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
+      - const: renesas,rz-ssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: int_req
+      - const: dma_rx
+      - const: dma_tx
+      - const: dma_rt
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ssi
+      - const: ssi_sfr
+      - const: audio_clk1
+      - const: audio_clk2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+    description:
+      The first cell represents a phandle to dmac
+      The second cell specifies the encoded MID/RID values of the SSI port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9]   - Specifies MID/RID value of a SSI channel as below
+                    MID/RID value of SSI rx0 = 0x256
+                    MID/RID value of SSI tx0 = 0x255
+                    MID/RID value of SSI rx1 = 0x25a
+                    MID/RID value of SSI tx1 = 0x259
+                    MID/RID value of SSI rt2 = 0x25f
+                    MID/RID value of SSI rx3 = 0x262
+                    MID/RID value of SSI tx3 = 0x261
+      bit[10]     - HIEN = 1, Detects a request in response to the rising edge
+                    of the signal
+      bit[11]     - LVL = 0, Detects based on the edge
+      bits[12:14] - AM = 2, Bus cycle mode
+      bit[15]     - TM = 0, Single transfer mode
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rt
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    ssi0: ssi@10049c00 {
+        compatible = "renesas,r9a07g044-ssi",
+                     "renesas,rz-ssi";
+            reg = <0x10049c00 0x400>;
+            interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+            clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+                     <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+                     <&audio_clk1>,
+                     <&audio_clk2>;
+            clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+            dmas = <&dmac 0x2655>,
+                   <&dmac 0x2656>;
+            dma-names = "tx", "rx";
+            #sound-dai-cells = <0>;
+    };

Documentation/devicetree/bindings/sound/rockchip-i2s.yaml

@@ -20,7 +20,9 @@ properties:
       - items:
           - enum:
               - rockchip,px30-i2s
+              - rockchip,rk1808-i2s
               - rockchip,rk3036-i2s
+              - rockchip,rk3128-i2s
               - rockchip,rk3188-i2s
               - rockchip,rk3228-i2s
               - rockchip,rk3288-i2s
@@ -29,6 +31,7 @@ properties:
               - rockchip,rk3366-i2s
               - rockchip,rk3368-i2s
               - rockchip,rk3399-i2s
+              - rockchip,rv1126-i2s
           - const: rockchip,rk3066-i2s
 
   reg:
@@ -61,6 +64,14 @@ properties:
   power-domains:
     maxItems: 1
 
+  reset-names:
+    items:
+      - const: reset-m
+      - const: reset-h
+
+  resets:
+    maxItems: 2
+
   rockchip,capture-channels:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 2

Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

@@ -23,6 +23,7 @@ properties:
       - const: rockchip,rk3366-spdif
       - const: rockchip,rk3368-spdif
       - const: rockchip,rk3399-spdif
+      - const: rockchip,rk3568-spdif
       - items:
           - enum:
               - rockchip,rk3188-spdif

Documentation/devicetree/bindings/spi/spi-controller.yaml

@@ -79,22 +79,7 @@ properties:
     description:
       The SPI controller acts as a slave, instead of a master.
 
-allOf:
+  slave:
-  - if:
-      not:
-        required:
-          - spi-slave
-    then:
-      properties:
-        "#address-cells":
-          const: 1
-    else:
-      properties:
-        "#address-cells":
-          const: 0
-
-patternProperties:
-  "^slave$":
     type: object
 
     properties:
@@ -105,6 +90,7 @@ patternProperties:
     required:
       - compatible
 
+patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
 
@@ -180,6 +166,20 @@ patternProperties:
       - compatible
       - reg
 
+allOf:
+  - if:
+      not:
+        required:
+          - spi-slave
+    then:
+      properties:
+        "#address-cells":
+          const: 1
+    else:
+      properties:
+        "#address-cells":
+          const: 0
+
 additionalProperties: true
 
 examples:

Documentation/devicetree/bindings/usb/nxp,isp1760.yaml

@@ -25,14 +25,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: Host controller interrupt
       - description: Device controller interrupt in isp1761
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: host
       - const: peripheral

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -271,6 +271,8 @@ patternProperties:
     description: Shenzen Chuangsiqi Technology Co.,Ltd.
   "^cubietech,.*":
     description: Cubietech, Ltd.
+  "^cui,.*":
+    description: CUI Devices
   "^cypress,.*":
     description: Cypress Semiconductor Corporation
   "^cznic,.*":

Documentation/driver-api/early-userspace/early_userspace_support.rst

@@ -69,17 +69,17 @@ early userspace image can be built by an unprivileged user.
 
 As a technical note, when directories and files are specified, the
 entire CONFIG_INITRAMFS_SOURCE is passed to
-usr/gen_initramfs_list.sh.  This means that CONFIG_INITRAMFS_SOURCE
+usr/gen_initramfs.sh.  This means that CONFIG_INITRAMFS_SOURCE
 can really be interpreted as any legal argument to
-gen_initramfs_list.sh.  If a directory is specified as an argument then
+gen_initramfs.sh.  If a directory is specified as an argument then
 the contents are scanned, uid/gid translation is performed, and
 usr/gen_init_cpio file directives are output.  If a directory is
-specified as an argument to usr/gen_initramfs_list.sh then the
+specified as an argument to usr/gen_initramfs.sh then the
 contents of the file are simply copied to the output.  All of the output
 directives from directory scanning and file contents copying are
 processed by usr/gen_init_cpio.
 
-See also 'usr/gen_initramfs_list.sh -h'.
+See also 'usr/gen_initramfs.sh -h'.
 
 Where's this all leading?
 =========================

Documentation/features/core/thread-info-in-task/arch-support.txt

@@ -0,0 +1,32 @@
+#
+# Feature name:          thread-info-in-task
+#         Kconfig:       THREAD_INFO_IN_TASK
+#         description:   arch makes use of the core kernel facility to embedd thread_info in task_struct
+#
+    -----------------------
+    |         arch |status|
+    -----------------------
+    |       alpha: | TODO |
+    |         arc: | TODO |
+    |         arm: | TODO |
+    |       arm64: |  ok  |
+    |        csky: | TODO |
+    |       h8300: | TODO |
+    |     hexagon: | TODO |
+    |        ia64: | TODO |
+    |        m68k: | TODO |
+    |  microblaze: | TODO |
+    |        mips: | TODO |
+    |       nds32: |  ok  |
+    |       nios2: | TODO |
+    |    openrisc: | TODO |
+    |      parisc: | TODO |
+    |     powerpc: |  ok  |
+    |       riscv: |  ok  |
+    |        s390: |  ok  |
+    |          sh: | TODO |
+    |       sparc: | TODO |
+    |          um: | TODO |
+    |         x86: |  ok  |
+    |      xtensa: | TODO |
+    -----------------------

Documentation/features/time/arch-tick-broadcast/arch-support.txt

@@ -22,7 +22,7 @@
     |    openrisc: | TODO |
     |      parisc: | TODO |
     |     powerpc: |  ok  |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
     |        s390: | TODO |
     |          sh: |  ok  |
     |       sparc: | TODO |

Documentation/filesystems/ramfs-rootfs-initramfs.rst

@@ -170,7 +170,7 @@ Documentation/driver-api/early-userspace/early_userspace_support.rst for more de
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
 creates a configuration file from that directory (usr/Makefile calls
-usr/gen_initramfs_list.sh), and proceeds to package up that directory
+usr/gen_initramfs.sh), and proceeds to package up that directory
 using the config file (by feeding it to usr/gen_init_cpio, which is created
 from usr/gen_init_cpio.c).  The kernel's build-time cpio creation code is
 entirely self-contained, and the kernel's boot-time extractor is also

Documentation/gpu/rfc/i915_gem_lmem.rst

@@ -18,114 +18,5 @@ real, with all the uAPI bits is:
         * Route shmem backend over to TTM SYSTEM for discrete
         * TTM purgeable object support
         * Move i915 buddy allocator over to TTM
-        * MMAP ioctl mode(see `I915 MMAP`_)
-        * SET/GET ioctl caching(see `I915 SET/GET CACHING`_)
 * Send RFC(with mesa-dev on cc) for final sign off on the uAPI
 * Add pciid for DG1 and turn on uAPI for real
-
-New object placement and region query uAPI
-==========================================
-Starting from DG1 we need to give userspace the ability to allocate buffers from
-device local-memory. Currently the driver supports gem_create, which can place
-buffers in system memory via shmem, and the usual assortment of other
-interfaces, like dumb buffers and userptr.
-
-To support this new capability, while also providing a uAPI which will work
-beyond just DG1, we propose to offer three new bits of uAPI:
-
-DRM_I915_QUERY_MEMORY_REGIONS
------------------------------
-New query ID which allows userspace to discover the list of supported memory
-regions(like system-memory and local-memory) for a given device. We identify
-each region with a class and instance pair, which should be unique. The class
-here would be DEVICE or SYSTEM, and the instance would be zero, on platforms
-like DG1.
-
-Side note: The class/instance design is borrowed from our existing engine uAPI,
-where we describe every physical engine in terms of its class, and the
-particular instance, since we can have more than one per class.
-
-In the future we also want to expose more information which can further
-describe the capabilities of a region.
-
-.. kernel-doc:: include/uapi/drm/i915_drm.h
-        :functions: drm_i915_gem_memory_class drm_i915_gem_memory_class_instance drm_i915_memory_region_info drm_i915_query_memory_regions
-
-GEM_CREATE_EXT
---------------
-New ioctl which is basically just gem_create but now allows userspace to provide
-a chain of possible extensions. Note that if we don't provide any extensions and
-set flags=0 then we get the exact same behaviour as gem_create.
-
-Side note: We also need to support PXP[1] in the near future, which is also
-applicable to integrated platforms, and adds its own gem_create_ext extension,
-which basically lets userspace mark a buffer as "protected".
-
-.. kernel-doc:: include/uapi/drm/i915_drm.h
-        :functions: drm_i915_gem_create_ext
-
-I915_GEM_CREATE_EXT_MEMORY_REGIONS
-----------------------------------
-Implemented as an extension for gem_create_ext, we would now allow userspace to
-optionally provide an immutable list of preferred placements at creation time,
-in priority order, for a given buffer object.  For the placements we expect
-them each to use the class/instance encoding, as per the output of the regions
-query. Having the list in priority order will be useful in the future when
-placing an object, say during eviction.
-
-.. kernel-doc:: include/uapi/drm/i915_drm.h
-        :functions: drm_i915_gem_create_ext_memory_regions
-
-One fair criticism here is that this seems a little over-engineered[2]. If we
-just consider DG1 then yes, a simple gem_create.flags or something is totally
-all that's needed to tell the kernel to allocate the buffer in local-memory or
-whatever. However looking to the future we need uAPI which can also support
-upcoming Xe HP multi-tile architecture in a sane way, where there can be
-multiple local-memory instances for a given device, and so using both class and
-instance in our uAPI to describe regions is desirable, although specifically
-for DG1 it's uninteresting, since we only have a single local-memory instance.
-
-Existing uAPI issues
-====================
-Some potential issues we still need to resolve.
-
-I915 MMAP
----------
-In i915 there are multiple ways to MMAP GEM object, including mapping the same
-object using different mapping types(WC vs WB), i.e multiple active mmaps per
-object. TTM expects one MMAP at most for the lifetime of the object. If it
-turns out that we have to backpedal here, there might be some potential
-userspace fallout.
-
-I915 SET/GET CACHING
---------------------
-In i915 we have set/get_caching ioctl. TTM doesn't let us to change this, but
-DG1 doesn't support non-snooped pcie transactions, so we can just always
-allocate as WB for smem-only buffers.  If/when our hw gains support for
-non-snooped pcie transactions then we must fix this mode at allocation time as
-a new GEM extension.
-
-This is related to the mmap problem, because in general (meaning, when we're
-not running on intel cpus) the cpu mmap must not, ever, be inconsistent with
-allocation mode.
-
-Possible idea is to let the kernel picks the mmap mode for userspace from the
-following table:
-
-smem-only: WB. Userspace does not need to call clflush.
-
-smem+lmem: We only ever allow a single mode, so simply allocate this as uncached
-memory, and always give userspace a WC mapping. GPU still does snooped access
-here(assuming we can't turn it off like on DG1), which is a bit inefficient.
-
-lmem only: always WC
-
-This means on discrete you only get a single mmap mode, all others must be
-rejected. That's probably going to be a new default mode or something like
-that.
-
-Links
-=====
-[1] https://patchwork.freedesktop.org/series/86798/
-
-[2] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5599#note_553791

Documentation/i2c/index.rst

@@ -17,6 +17,7 @@ Introduction
    busses/index
    i2c-topology
    muxes/i2c-mux-gpio
+   i2c-sysfs
 
 Writing device drivers
 ======================

Documentation/networking/af_xdp.rst

@@ -243,8 +243,8 @@ Configuration Flags and Socket Options
 These are the various configuration flags that can be used to control
 and monitor the behavior of AF_XDP sockets.
 
-XDP_COPY and XDP_ZERO_COPY bind flags
+XDP_COPY and XDP_ZEROCOPY bind flags
--------------------------------------
+------------------------------------
 
 When you bind to a socket, the kernel will first try to use zero-copy
 copy. If zero-copy is not supported, it will fall back on using copy
@@ -252,7 +252,7 @@ mode, i.e. copying all packets out to user space. But if you would
 like to force a certain mode, you can use the following flags. If you
 pass the XDP_COPY flag to the bind call, the kernel will force the
 socket into copy mode. If it cannot use copy mode, the bind call will
-fail with an error. Conversely, the XDP_ZERO_COPY flag will force the
+fail with an error. Conversely, the XDP_ZEROCOPY flag will force the
 socket into zero-copy mode or fail.
 
 XDP_SHARED_UMEM bind flag

Documentation/networking/ethtool-netlink.rst

@@ -212,6 +212,7 @@ Userspace to kernel:
   ``ETHTOOL_MSG_FEC_SET``               set FEC settings
   ``ETHTOOL_MSG_MODULE_EEPROM_GET``     read SFP module EEPROM
   ``ETHTOOL_MSG_STATS_GET``             get standard statistics
+  ``ETHTOOL_MSG_PHC_VCLOCKS_GET``       get PHC virtual clocks info
   ===================================== ================================
 
 Kernel to userspace:
@@ -250,6 +251,7 @@ Kernel to userspace:
   ``ETHTOOL_MSG_FEC_NTF``                  FEC settings
   ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY``  read SFP module EEPROM
   ``ETHTOOL_MSG_STATS_GET_REPLY``          standard statistics
+  ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY``    PHC virtual clocks info
   ======================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -1477,6 +1479,25 @@ Low and high bounds are inclusive, for example:
  etherStatsPkts512to1023Octets 512  1023
  ============================= ==== ====
 
+PHC_VCLOCKS_GET
+===============
+
+Query device PHC virtual clocks information.
+
+Request contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PHC_VCLOCKS_HEADER``      nested  request header
+  ====================================  ======  ==========================
+
+Kernel response contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PHC_VCLOCKS_HEADER``      nested  reply header
+  ``ETHTOOL_A_PHC_VCLOCKS_NUM``         u32     PHC virtual clocks number
+  ``ETHTOOL_A_PHC_VCLOCKS_INDEX``       s32     PHC index array
+  ====================================  ======  ==========================
+
 Request translation
 ===================
 
@@ -1575,4 +1596,5 @@ are netlink only.
   n/a                                 ``ETHTOOL_MSG_CABLE_TEST_ACT``
   n/a                                 ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``
   n/a                                 ``ETHTOOL_MSG_TUNNEL_INFO_GET``
+  n/a                                 ``ETHTOOL_MSG_PHC_VCLOCKS_GET``
   =================================== =====================================

Documentation/networking/ip-sysctl.rst

@@ -826,7 +826,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.
 
-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).
 
 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The

Documentation/networking/netdev-FAQ.rst

@@ -228,6 +228,23 @@ before posting to the mailing list. The patchwork build bot instance
 gets overloaded very easily and netdev@vger really doesn't need more
 traffic if we can help it.
 
+netdevsim is great, can I extend it for my out-of-tree tests?
+-------------------------------------------------------------
+
+No, `netdevsim` is a test vehicle solely for upstream tests.
+(Please add your tests under tools/testing/selftests/.)
+
+We also give no guarantees that `netdevsim` won't change in the future
+in a way which would break what would normally be considered uAPI.
+
+Is netdevsim considered a "user" of an API?
+-------------------------------------------
+
+Linux kernel has a long standing rule that no API should be added unless
+it has a real, in-tree user. Mock-ups and tests based on `netdevsim` are
+strongly encouraged when adding new APIs, but `netdevsim` in itself
+is **not** considered a use case/user.
+
 Any other tips to help ensure my net/net-next patch gets OK'd?
 --------------------------------------------------------------
 Attention to detail.  Re-read your own work as if you were the

Documentation/networking/nf_conntrack-sysctl.rst

@@ -110,6 +110,12 @@ nf_conntrack_tcp_be_liberal - BOOLEAN
 	Be conservative in what you do, be liberal in what you accept from others.
 	If it's non-zero, we mark only out of window RST segments as INVALID.
 
+nf_conntrack_tcp_ignore_invalid_rst - BOOLEAN
+	- 0 - disabled (default)
+	- 1 - enabled
+
+	If it's 1, we don't mark out of window RST segments as INVALID.
+
 nf_conntrack_tcp_loose - BOOLEAN
 	- 0 - disabled
 	- not 0 - enabled (default)
@@ -185,19 +191,9 @@ nf_flowtable_tcp_timeout - INTEGER (seconds)
         TCP connections may be offloaded from nf conntrack to nf flow table.
         Once aged, the connection is returned to nf conntrack with tcp pickup timeout.
 
-nf_flowtable_tcp_pickup - INTEGER (seconds)
-        default 120
-
-        TCP connection timeout after being aged from nf flow table offload.
-
 nf_flowtable_udp_timeout - INTEGER (seconds)
         default 30
 
         Control offload timeout for udp connections.
         UDP connections may be offloaded from nf conntrack to nf flow table.
         Once aged, the connection is returned to nf conntrack with udp pickup timeout.
-
-nf_flowtable_udp_pickup - INTEGER (seconds)
-        default 30
-
-        UDP connection timeout after being aged from nf flow table offload.

Documentation/networking/operstates.rst

@@ -73,7 +73,9 @@ IF_OPER_LOWERLAYERDOWN (3):
  state (f.e. VLAN).
 
 IF_OPER_TESTING (4):
- Unused in current kernel.
+ Interface is in testing mode, for example executing driver self-tests
+ or media (cable) test. It can't be used for normal traffic until tests
+ complete.
 
 IF_OPER_DORMANT (5):
  Interface is L1 up, but waiting for an external event, f.e. for a
@@ -111,7 +113,7 @@ it as lower layer.
 
 Note that for certain kind of soft-devices, which are not managing any
 real hardware, it is possible to set this bit from userspace.  One
-should use TVL IFLA_CARRIER to do so.
+should use TLV IFLA_CARRIER to do so.
 
 netif_carrier_ok() can be used to query that bit.
 

Documentation/networking/tipc.rst

@@ -4,10 +4,125 @@
 Linux Kernel TIPC
 =================
 
-TIPC (Transparent Inter Process Communication) is a protocol that is
+Introduction
-specially designed for intra-cluster communication.
+============
 
-For more information about TIPC, see http://tipc.sourceforge.net.
+TIPC (Transparent Inter Process Communication) is a protocol that is specially
+designed for intra-cluster communication. It can be configured to transmit
+messages either on UDP or directly across Ethernet. Message delivery is
+sequence guaranteed, loss free and flow controlled. Latency times are shorter
+than with any other known protocol, while maximal throughput is comparable to
+that of TCP.
+
+TIPC Features
+-------------
+
+- Cluster wide IPC service
+
+  Have you ever wished you had the convenience of Unix Domain Sockets even when
+  transmitting data between cluster nodes? Where you yourself determine the
+  addresses you want to bind to and use? Where you don't have to perform DNS
+  lookups and worry about IP addresses? Where you don't have to start timers
+  to monitor the continuous existence of peer sockets? And yet without the
+  downsides of that socket type, such as the risk of lingering inodes?
+
+  Welcome to the Transparent Inter Process Communication service, TIPC in short,
+  which gives you all of this, and a lot more.
+
+- Service Addressing
+
+  A fundamental concept in TIPC is that of Service Addressing which makes it
+  possible for a programmer to chose his own address, bind it to a server
+  socket and let client programs use only that address for sending messages.
+
+- Service Tracking
+
+  A client wanting to wait for the availability of a server, uses the Service
+  Tracking mechanism to subscribe for binding and unbinding/close events for
+  sockets with the associated service address.
+
+  The service tracking mechanism can also be used for Cluster Topology Tracking,
+  i.e., subscribing for availability/non-availability of cluster nodes.
+
+  Likewise, the service tracking mechanism can be used for Cluster Connectivity
+  Tracking, i.e., subscribing for up/down events for individual links between
+  cluster nodes.
+
+- Transmission Modes
+
+  Using a service address, a client can send datagram messages to a server socket.
+
+  Using the same address type, it can establish a connection towards an accepting
+  server socket.
+
+  It can also use a service address to create and join a Communication Group,
+  which is the TIPC manifestation of a brokerless message bus.
+
+  Multicast with very good performance and scalability is available both in
+  datagram mode and in communication group mode.
+
+- Inter Node Links
+
+  Communication between any two nodes in a cluster is maintained by one or two
+  Inter Node Links, which both guarantee data traffic integrity and monitor
+  the peer node's availability.
+
+- Cluster Scalability
+
+  By applying the Overlapping Ring Monitoring algorithm on the inter node links
+  it is possible to scale TIPC clusters up to 1000 nodes with a maintained
+  neighbor failure discovery time of 1-2 seconds. For smaller clusters this
+  time can be made much shorter.
+
+- Neighbor Discovery
+
+  Neighbor Node Discovery in the cluster is done by Ethernet broadcast or UDP
+  multicast, when any of those services are available. If not, configured peer
+  IP addresses can be used.
+
+- Configuration
+
+  When running TIPC in single node mode no configuration whatsoever is needed.
+  When running in cluster mode TIPC must as a minimum be given a node address
+  (before Linux 4.17) and told which interface to attach to. The "tipc"
+  configuration tool makes is possible to add and maintain many more
+  configuration parameters.
+
+- Performance
+
+  TIPC message transfer latency times are better than in any other known protocol.
+  Maximal byte throughput for inter-node connections is still somewhat lower than
+  for TCP, while they are superior for intra-node and inter-container throughput
+  on the same host.
+
+- Language Support
+
+  The TIPC user API has support for C, Python, Perl, Ruby, D and Go.
+
+More Information
+----------------
+
+- How to set up TIPC:
+
+  http://tipc.io/getting_started.html
+
+- How to program with TIPC:
+
+  http://tipc.io/programming.html
+
+- How to contribute to TIPC:
+
+- http://tipc.io/contacts.html
+
+- More details about TIPC specification:
+
+  http://tipc.io/protocol.html
+
+
+Implementation
+==============
+
+TIPC is implemented as a kernel module in net/tipc/ directory.
 
 TIPC Base Types
 ---------------

Documentation/trace/histogram.rst

@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information

Documentation/translations/zh_CN/process/2.Process.rst

@@ -47,7 +47,7 @@
 （顺便说一句，值得注意的是，合并窗口期间集成的更改并不是凭空产生的；它们是经
 提前收集、测试和分级的。稍后将详细描述该过程的工作方式。）
 
-合并窗口持续大约两周。在这段时间结束时，LinusTorvalds将声明窗口已关闭，并
+合并窗口持续大约两周。在这段时间结束时，Linus Torvalds将声明窗口已关闭，并
 释放第一个“rc”内核。例如，对于目标为5.6的内核，在合并窗口结束时发生的释放
 将被称为5.6-rc1。-rc1 版本是一个信号，表示合并新特性的时间已经过去，稳定下一
 个内核的时间已经到来。
@@ -168,7 +168,7 @@ Greg Kroah-Hartman领导。稳定团队将使用5.x.y编号方案不定期地发
 补丁如何进入内核
 ----------------
 
-只有一个人可以将补丁合并到主线内核存储库中：LinusTorvalds。但是，在进入
+只有一个人可以将补丁合并到主线内核存储库中：Linus Torvalds。但是，在进入
 2.6.38内核的9500多个补丁中，只有112个（大约1.3%）是由Linus自己直接选择的。
 内核项目已经发展到一个没有一个开发人员可以在没有支持的情况下检查和选择每个
 补丁的规模。内核开发人员处理这种增长的方式是使用围绕信任链构建的助理系统。

Documentation/userspace-api/seccomp_filter.rst

@@ -263,7 +263,7 @@ Userspace can also add file descriptors to the notifying process via
 ``ioctl(SECCOMP_IOCTL_NOTIF_ADDFD)``. The ``id`` member of
 ``struct seccomp_notif_addfd`` should be the same ``id`` as in
 ``struct seccomp_notif``. The ``newfd_flags`` flag may be used to set flags
-like O_EXEC on the file descriptor in the notifying process. If the supervisor
+like O_CLOEXEC on the file descriptor in the notifying process. If the supervisor
 wants to inject the file descriptor with a specific number, the
 ``SECCOMP_ADDFD_FLAG_SETFD`` flag can be used, and set the ``newfd`` member to
 the specific number to use. If that file descriptor is already open in the

Documentation/virt/kvm/api.rst

@@ -855,7 +855,7 @@ in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
 use PPIs designated for specific cpus.  The irq field is interpreted
 like this::
 
-  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
+  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
   field: | vcpu2_index | irq_type  | vcpu_index |  irq_id  |
 
 The irq_type field has the following values:
@@ -2149,10 +2149,10 @@ prior to calling the KVM_RUN ioctl.
 Errors:
 
   ======   ============================================================
-  ENOENT   no such register
+  ENOENT   no such register
-  EINVAL   invalid register ID, or no such register or used with VMs in
+  EINVAL   invalid register ID, or no such register or used with VMs in
            protected virtualization mode on s390
-  EPERM    (arm64) register access not allowed before vcpu finalization
+  EPERM    (arm64) register access not allowed before vcpu finalization
   ======   ============================================================
 
 (These error codes are indicative only: do not rely on a specific error
@@ -2590,10 +2590,10 @@ following id bit patterns::
 Errors include:
 
   ======== ============================================================
-  ENOENT   no such register
+  ENOENT   no such register
-  EINVAL   invalid register ID, or no such register or used with VMs in
+  EINVAL   invalid register ID, or no such register or used with VMs in
            protected virtualization mode on s390
-  EPERM    (arm64) register access not allowed before vcpu finalization
+  EPERM    (arm64) register access not allowed before vcpu finalization
   ======== ============================================================
 
 (These error codes are indicative only: do not rely on a specific error
@@ -3112,13 +3112,13 @@ current state.  "addr" is ignored.
 Errors:
 
   ======     =================================================================
-  EINVAL     the target is unknown, or the combination of features is invalid.
+  EINVAL     the target is unknown, or the combination of features is invalid.
-  ENOENT     a features bit specified is unknown.
+  ENOENT     a features bit specified is unknown.
   ======     =================================================================
 
 This tells KVM what type of CPU to present to the guest, and what
-optional features it should have.  This will cause a reset of the cpu
+optional features it should have.  This will cause a reset of the cpu
-registers to their initial values.  If this is not called, KVM_RUN will
+registers to their initial values.  If this is not called, KVM_RUN will
 return ENOEXEC for that vcpu.
 
 The initial values are defined as:
@@ -3239,8 +3239,8 @@ VCPU matching underlying host.
 Errors:
 
   =====      ==============================================================
-  E2BIG      the reg index list is too big to fit in the array specified by
+  E2BIG      the reg index list is too big to fit in the array specified by
-             the user (the number required will be written into n).
+             the user (the number required will be written into n).
   =====      ==============================================================
 
 ::
@@ -3288,7 +3288,7 @@ specific device.
 ARM/arm64 divides the id field into two parts, a device id and an
 address type id specific to the individual device::
 
-  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
+  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
   field: |        0x00000000      |     device id   |  addr type id  |
 
 ARM/arm64 currently only require this when using the in-kernel GIC
@@ -7049,7 +7049,7 @@ In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to
 trap and emulate MSRs that are outside of the scope of KVM as well as
 limit the attack surface on KVM's MSR emulation code.
 
-8.28 KVM_CAP_ENFORCE_PV_CPUID
+8.28 KVM_CAP_ENFORCE_PV_FEATURE_CPUID
 -----------------------------
 
 Architectures: x86

Documentation/virt/kvm/locking.rst

@@ -25,10 +25,10 @@ On x86:
 
 - vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock
 
-- kvm->arch.mmu_lock is an rwlock.  kvm->arch.tdp_mmu_pages_lock is
+- kvm->arch.mmu_lock is an rwlock.  kvm->arch.tdp_mmu_pages_lock and
-  taken inside kvm->arch.mmu_lock, and cannot be taken without already
+  kvm->arch.mmu_unsync_pages_lock are taken inside kvm->arch.mmu_lock, and
-  holding kvm->arch.mmu_lock (typically with ``read_lock``, otherwise
+  cannot be taken without already holding kvm->arch.mmu_lock (typically with
-  there's no need to take kvm->arch.tdp_mmu_pages_lock at all).
+  ``read_lock`` for the TDP MMU, thus the need for additional spinlocks).
 
 Everything else is a leaf: no other lock is taken inside the critical
 sections.

LICENSES/dual/CC-BY-4.0

@@ -392,7 +392,7 @@ Section 8 -- Interpretation.
 Creative Commons is not a party to its public
 licenses. Notwithstanding, Creative Commons may elect to apply one of
 its public licenses to material it publishes and in those instances
-will be considered the “Licensor.” The text of the Creative Commons
+will be considered the "Licensor." The text of the Creative Commons
 public licenses is dedicated to the public domain under the CC0 Public
 Domain Dedication. Except for the limited purpose of indicating that
 material is shared under a Creative Commons public license or as

MAINTAINERS

@@ -445,7 +445,7 @@ F:	drivers/platform/x86/wmi.c
 F:	include/uapi/linux/wmi.h
 
 ACRN HYPERVISOR SERVICE MODULE
-M:	Shuo Liu <shuo.a.liu@intel.com>
+M:	Fei Li <fei1.li@intel.com>
 L:	acrn-dev@lists.projectacrn.org (subscribers-only)
 S:	Supported
 W:	https://projectacrn.org
@@ -933,6 +933,7 @@ F:	drivers/video/fbdev/geode/
 
 AMD IOMMU (AMD-VI)
 M:	Joerg Roedel <joro@8bytes.org>
+R:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
 L:	iommu@lists.linux-foundation.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@@ -3865,6 +3866,16 @@ L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/raw/brcmnand/
 
+BROADCOM STB PCIE DRIVER
+M:	Jim Quinlan <jim2101024@gmail.com>
+M:	Nicolas Saenz Julienne <nsaenz@kernel.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+F:	drivers/pci/controller/pcie-brcmstb.c
+
 BROADCOM SYSTEMPORT ETHERNET DRIVER
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	bcm-kernel-feedback-list@broadcom.com
@@ -4497,7 +4508,7 @@ L:	clang-built-linux@googlegroups.com
 S:	Supported
 W:	https://clangbuiltlinux.github.io/
 B:	https://github.com/ClangBuiltLinux/linux/issues
-C:	irc://chat.freenode.net/clangbuiltlinux
+C:	irc://irc.libera.chat/clangbuiltlinux
 F:	Documentation/kbuild/llvm.rst
 F:	include/linux/compiler-clang.h
 F:	scripts/clang-tools/
@@ -7857,9 +7868,9 @@ S:	Maintained
 F:	drivers/input/touchscreen/goodix.c
 
 GOOGLE ETHERNET DRIVERS
-M:	Catherine Sullivan <csully@google.com>
+M:	Jeroen de Borst <jeroendb@google.com>
-R:	Sagi Shahar <sagis@google.com>
+R:	Catherine Sullivan <csully@google.com>
-R:	Jon Olson <jonolson@google.com>
+R:	David Awogbemila <awogbemila@google.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/device_drivers/ethernet/google/gve.rst
@@ -11326,6 +11337,12 @@ W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-maxiradio*
 
+MCBA MICROCHIP CAN BUS ANALYZER TOOL DRIVER
+R:	Yasushi SHOJI <yashi@spacecubics.com>
+L:	linux-can@vger.kernel.org
+S:	Maintained
+F:	drivers/net/can/usb/mcba_usb.c
+
 MCAN MMIO DEVICE DRIVER
 M:	Chandrasekar Ramakrishnan <rcsekar@samsung.com>
 L:	linux-can@vger.kernel.org
@@ -11757,6 +11774,7 @@ F:	drivers/char/hw_random/mtk-rng.c
 MEDIATEK SWITCH DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
 M:	Landen Chao <Landen.Chao@mediatek.com>
+M:	DENG Qingfang <dqfext@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/dsa/mt7530.*
@@ -14422,6 +14440,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
 F:	drivers/pci/controller/dwc/pcie-histb.c
 
+PCIE DRIVER FOR INTEL LGM GW SOC
+M:	Rahul Tanwar <rtanwar@maxlinear.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
+F:	drivers/pci/controller/dwc/pcie-intel-gw.c
+
 PCIE DRIVER FOR MEDIATEK
 M:	Ryder Lee <ryder.lee@mediatek.com>
 M:	Jianjun Wang <jianjun.wang@mediatek.com>
@@ -15009,6 +15034,13 @@ F:	drivers/net/phy/dp83640*
 F:	drivers/ptp/*
 F:	include/linux/ptp_cl*
 
+PTP VIRTUAL CLOCK SUPPORT
+M:	Yangbo Lu <yangbo.lu@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/ptp/ptp_vclock.c
+F:	net/ethtool/phc_vclocks.c
+
 PTRACE SUPPORT
 M:	Oleg Nesterov <oleg@redhat.com>
 S:	Maintained
@@ -15459,6 +15491,8 @@ M:	Pan, Xinhui <Xinhui.Pan@amd.com>
 L:	amd-gfx@lists.freedesktop.org
 S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
+B:	https://gitlab.freedesktop.org/drm/amd/-/issues
+C:	irc://irc.oftc.net/radeon
 F:	drivers/gpu/drm/amd/
 F:	drivers/gpu/drm/radeon/
 F:	include/uapi/drm/amdgpu_drm.h
@@ -15786,7 +15820,7 @@ F:	Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
 F:	drivers/i2c/busses/i2c-emev2.c
 
 RENESAS ETHERNET DRIVERS
-R:	Sergei Shtylyov <sergei.shtylyov@gmail.com>
+R:	Sergey Shtylyov <s.shtylyov@omp.ru>
 L:	netdev@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 F:	Documentation/devicetree/bindings/net/renesas,*.yaml
@@ -17798,7 +17832,7 @@ F:	include/linux/sync_file.h
 F:	include/uapi/linux/sync_file.h
 
 SYNOPSYS ARC ARCHITECTURE
-M:	Vineet Gupta <vgupta@synopsys.com>
+M:	Vineet Gupta <vgupta@kernel.org>
 L:	linux-snps-arc@lists.infradead.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
@@ -19114,7 +19148,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
-F:	drivers/phy/hisilicon/phy-kirin970-usb3.c
+F:	drivers/phy/hisilicon/phy-hi3670-usb3.c
 
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
@@ -19792,6 +19826,14 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/ptp/ptp_vmw.c
 
+VMWARE VMCI DRIVER
+M:	Jorgen Hansen <jhansen@vmware.com>
+M:	Vishnu Dasa <vdasa@vmware.com>
+L:	linux-kernel@vger.kernel.org
+L:	pv-drivers@vmware.com (private)
+S:	Maintained
+F:	drivers/misc/vmw_vmci/
+
 VMWARE VMMOUSE SUBDRIVER
 M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc7
 NAME = Opossums on Parade
 
 # *DOCUMENTATION*
@@ -546,7 +546,6 @@ export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
-	$(Q)rm -f .tmp_quiet_recordmcount
 
 PHONY += outputmakefile
 ifdef building_out_of_srctree
@@ -728,11 +727,12 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
-quiet_cmd_syncconfig = SYNC    $@
+#
-      cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig
+# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
-
+# so you cannot notice that Kconfig is waiting for the user input.
 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
-	+$(call cmd,syncconfig)
+	$(Q)$(kecho) "  SYNC    $@"
+	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 else # !may-sync-config
 # External modules and some install targets need include/generated/autoconf.h
 # and include/config/auto.conf but do not care if they are up-to-date.
@@ -802,7 +802,7 @@ else
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
-KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
+KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=5,)
 endif
 
 # These warnings generated too much noise in a regular build.
@@ -1316,6 +1316,16 @@ PHONY += scripts_unifdef
 scripts_unifdef: scripts_basic
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
 
+# ---------------------------------------------------------------------------
+# Install
+
+# Many distributions have the custom install script, /sbin/installkernel.
+# If DKMS is installed, 'make install' will eventually recuses back
+# to the this Makefile to build and install external modules.
+# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
+
+install: sub_make_done :=
+
 # ---------------------------------------------------------------------------
 # Tools
 

arch/alpha/Kconfig

@@ -14,7 +14,6 @@ config ALPHA
 	select PCI_SYSCALL if PCI
 	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_IDE
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
@@ -532,7 +531,7 @@ config SMP
 	  will run faster if you say N here.
 
 	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 

arch/alpha/boot/bootp.c

@@ -23,7 +23,7 @@
 #include "ksize.h"
 
 extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
+	struct pcb_struct *pcb_va, struct pcb_struct *pcb_pa,
 	unsigned long *vptb);
 
 extern void move_stack(unsigned long new_stack);

arch/alpha/boot/bootpz.c

@@ -200,7 +200,7 @@ extern char _end;
 	START_ADDR	KSEG address of the entry point of kernel code.
 
 	ZERO_PGE	KSEG address of page full of zeroes, but 
-			upon entry to kerne cvan be expected
+			upon entry to kernel, it can be expected
 			to hold the parameter list and possible
 			INTRD information.
 

arch/alpha/boot/misc.c

@@ -30,7 +30,7 @@ extern long srm_printk(const char *, ...)
      __attribute__ ((format (printf, 1, 2)));
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 #define OF(args)  args
 #define STATIC static

arch/alpha/configs/defconfig

@@ -70,3 +70,4 @@ CONFIG_DEBUG_INFO=y
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_DEVTMPFS=y

arch/alpha/include/asm/compiler.h

@@ -4,15 +4,4 @@
 
 #include <uapi/asm/compiler.h>
 
-/* Some idiots over in <linux/compiler.h> thought inline should imply
-   always_inline.  This breaks stuff.  We'll include this file whenever
-   we run into such problems.  */
-
-#include <linux/compiler.h>
-#undef inline
-#undef __inline__
-#undef __inline
-#undef __always_inline
-#define __always_inline		inline __attribute__((always_inline))
-
 #endif /* __ALPHA_COMPILER_H */

arch/alpha/include/asm/syscall.h

@@ -9,4 +9,10 @@ static inline int syscall_get_arch(struct task_struct *task)
 	return AUDIT_ARCH_ALPHA;
 }
 
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
 #endif	/* _ASM_ALPHA_SYSCALL_H */

arch/alpha/kernel/osf_sys.c

@@ -834,7 +834,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 			return -EFAULT;
 		state = &current_thread_info()->ieee_state;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
 		*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
 
 		/* Update the real fpcr.  */
@@ -854,7 +854,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 		state = &current_thread_info()->ieee_state;
 		exc &= IEEE_STATUS_MASK;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
  		swcr = (*state & IEEE_SW_MASK) | exc;
 		*state |= exc;
 

arch/alpha/kernel/perf_event.c

@@ -574,7 +574,7 @@ static void alpha_pmu_start(struct perf_event *event, int flags)
  * Check that CPU performance counters are supported.
  * - currently support EV67 and later CPUs.
  * - actually some later revisions of the EV6 have the same PMC model as the
- *     EV67 but we don't do suffiently deep CPU detection to detect them.
+ *     EV67 but we don't do sufficiently deep CPU detection to detect them.
  *     Bad luck to the very few people who might have one, I guess.
  */
 static int supported_cpu(void)

arch/alpha/kernel/process.c

@@ -256,7 +256,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		childstack->r26 = (unsigned long) ret_from_kernel_thread;
 		childstack->r9 = usp;	/* function */
 		childstack->r10 = kthread_arg;
-		childregs->hae = alpha_mv.hae_cache,
+		childregs->hae = alpha_mv.hae_cache;
 		childti->pcb.usp = 0;
 		return 0;
 	}

arch/alpha/kernel/setup.c

@@ -319,18 +319,19 @@ setup_memory(void *kernel_end)
 		       i, cluster->usage, cluster->start_pfn,
 		       cluster->start_pfn + cluster->numpages);
 
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
 		end = cluster->start_pfn + cluster->numpages;
 		if (end > max_low_pfn)
 			max_low_pfn = end;
 
 		memblock_add(PFN_PHYS(cluster->start_pfn),
 			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
 	}
 
 	/*

arch/alpha/kernel/smp.c

@@ -582,7 +582,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)

arch/alpha/kernel/sys_nautilus.c

@@ -212,7 +212,7 @@ nautilus_init_pci(void)
 
 	/* Use default IO. */
 	pci_add_resource(&bridge->windows, &ioport_resource);
-	/* Irongate PCI memory aperture, calculate requred size before
+	/* Irongate PCI memory aperture, calculate required size before
 	   setting it up. */
 	pci_add_resource(&bridge->windows, &irongate_mem);
 

arch/alpha/kernel/traps.c

@@ -730,7 +730,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	long error;
 
 	/* Check the UAC bits to decide what the user wants us to do
-	   with the unaliged access.  */
+	   with the unaligned access.  */
 
 	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
 		if (__ratelimit(&ratelimit)) {

arch/alpha/math-emu/math.c

@@ -65,7 +65,7 @@ static long (*save_emul) (unsigned long pc);
 long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
 long do_alpha_fp_emul(unsigned long);
 
-int init_module(void)
+static int alpha_fp_emul_init_module(void)
 {
 	save_emul_imprecise = alpha_fp_emul_imprecise;
 	save_emul = alpha_fp_emul;
@@ -73,12 +73,14 @@ int init_module(void)
 	alpha_fp_emul = do_alpha_fp_emul;
 	return 0;
 }
+module_init(alpha_fp_emul_init_module);
 
-void cleanup_module(void)
+static void alpha_fp_emul_cleanup_module(void)
 {
 	alpha_fp_emul_imprecise = save_emul_imprecise;
 	alpha_fp_emul = save_emul;
 }
+module_exit(alpha_fp_emul_cleanup_module);
 
 #undef  alpha_fp_emul_imprecise
 #define alpha_fp_emul_imprecise		do_alpha_fp_emul_imprecise
@@ -401,3 +403,5 @@ alpha_fp_emul_imprecise (struct pt_regs *regs, unsigned long write_mask)
 egress:
 	return si_code;
 }
+
+EXPORT_SYMBOL(__udiv_qrnnd);

arch/arc/Kconfig

@@ -409,7 +409,7 @@ choice
 	help
 	  Depending on the configuration, CPU can contain DSP registers
 	  (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL).
-	  Bellow is options describing how to handle these registers in
+	  Below are options describing how to handle these registers in
 	  interrupt entry / exit and in context switch.
 
 config ARC_DSP_NONE

arch/arc/include/asm/checksum.h

@@ -24,7 +24,7 @@
  */
 static inline __sum16 csum_fold(__wsum s)
 {
-	unsigned r = s << 16 | s >> 16;	/* ror */
+	unsigned int r = s << 16 | s >> 16;	/* ror */
 	s = ~s;
 	s -= r;
 	return s >> 16;

arch/arc/include/asm/perf_event.h

@@ -123,7 +123,7 @@ static const char * const arc_pmu_ev_hw_map[] = {
 #define C(_x)			PERF_COUNT_HW_CACHE_##_x
 #define CACHE_OP_UNSUPPORTED	0xffff
 
-static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,

arch/arc/kernel/fpu.c

@@ -57,23 +57,26 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 
 void fpu_init_task(struct pt_regs *regs)
 {
+	const unsigned int fwe = 0x80000000;
+
 	/* default rounding mode */
 	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
 
-	/* set "Write enable" to allow explicit write to exception flags */
+	/* Initialize to zero: setting requires FWE be set */
-	write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
 }
 
 void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 {
 	struct arc_fpu *save = &prev->thread.fpu;
 	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
 
 	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
 	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
 
 	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
-	write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
 }
 
 #endif

arch/arc/kernel/unwind.c

@@ -260,7 +260,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 {
 	const u8 *ptr;
 	unsigned long tableSize = table->size, hdrSize;
-	unsigned n;
+	unsigned int n;
 	const u32 *fde;
 	struct {
 		u8 version;
@@ -462,7 +462,7 @@ static uleb128_t get_uleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	uleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -483,7 +483,7 @@ static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	sleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -609,7 +609,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
 static signed fde_pointer_type(const u32 *cie)
 {
 	const u8 *ptr = (const u8 *)(cie + 2);
-	unsigned version = *ptr;
+	unsigned int version = *ptr;
 
 	if (*++ptr) {
 		const char *aug;
@@ -904,7 +904,7 @@ int arc_unwind(struct unwind_frame_info *frame)
 	const u8 *ptr = NULL, *end = NULL;
 	unsigned long pc = UNW_PC(frame) - frame->call_frame;
 	unsigned long startLoc = 0, endLoc = 0, cfa;
-	unsigned i;
+	unsigned int i;
 	signed ptrType = -1;
 	uleb128_t retAddrReg = 0;
 	const struct unwind_table *table;

arch/arc/kernel/vmlinux.lds.S

@@ -88,6 +88,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}

arch/arm/Kconfig

@@ -95,7 +95,6 @@ config ARM
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
-	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -361,7 +360,6 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
-	select HAVE_IDE
 	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
@@ -395,7 +393,7 @@ config ARCH_IXP4XX
 	select IXP4XX_IRQ
 	select IXP4XX_TIMER
 	# With the new PCI driver this is not needed
-	select NEED_MACH_IO_H if PCI_IXP4XX_LEGACY
+	select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
@@ -430,7 +428,6 @@ config ARCH_PXA
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_PXA
 	select GPIOLIB
-	select HAVE_IDE
 	select IRQ_DOMAIN
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -446,7 +443,6 @@ config ARCH_RPC
 	select ARM_HAS_SG_CHAIN
 	select CPU_SA110
 	select FIQ
-	select HAVE_IDE
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select LEGACY_TIMER_TICK
@@ -469,7 +465,6 @@ config ARCH_SA1100
 	select CPU_SA1100
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
 	select NEED_MACH_MEMORY_H
@@ -505,7 +500,6 @@ config ARCH_OMAP1
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select HAVE_IDE
 	select HAVE_LEGACY_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1595,7 +1595,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;

arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts

@@ -4,6 +4,7 @@
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 /{
 	model = "ASRock E3C246D4I BMC";
@@ -73,7 +74,8 @@
 
 &vuart {
 	status = "okay";
-	aspeed,sirq-active-high;
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &mac0 {

arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts

@@ -406,15 +406,15 @@
 		reg = <0x69>;
 	};
 
-	power-supply@6a {
-		compatible = "ibm,cffps";
-		reg = <0x6a>;
-	};
-
 	power-supply@6b {
 		compatible = "ibm,cffps";
 		reg = <0x6b>;
 	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
 };
 
 &i2c4 {
@@ -2832,6 +2832,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
 };
 
 &fsim0 {

arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts

@@ -280,10 +280,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
 
 	pin_mclr_vpp {
 		gpio-hog;

arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts

@@ -136,10 +136,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
 };
 
 &fmc {
@@ -189,6 +186,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };
 
 &fsim0 {

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -388,13 +388,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 

arch/arm/boot/dts/imx6qdl-sr-som.dtsi

@@ -54,7 +54,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 

arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi

@@ -43,6 +43,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";

arch/arm/boot/dts/qcom-apq8060-dragonboard.dts

@@ -581,7 +581,7 @@
 			 * EBI2. This has a 25MHz chrystal next to it, so no
 			 * clocking is needed.
 			 */
-			ethernet-ebi2@2,0 {
+			ethernet@2,0 {
 				compatible = "smsc,lan9221", "smsc,lan9115";
 				reg = <2 0x0 0x100>;
 				/*
@@ -598,8 +598,6 @@
 				phy-mode = "mii";
 				reg-io-width = <2>;
 				smsc,force-external-phy;
-				/* IRQ on edge falling = active low */
-				smsc,irq-active-low;
 				smsc,irq-push-pull;
 
 				/*

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

@@ -37,7 +37,7 @@
 		poll-interval = <20>;
 
 		/*
-		 * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+		 * The EXTi IRQ line 3 is shared with ethernet,
 		 * so mark this as polled GPIO key.
 		 */
 		button-0 {
@@ -46,6 +46,16 @@
 			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
 		};
 
+		/*
+		 * The EXTi IRQ line 6 is shared with touchscreen,
+		 * so mark this as polled GPIO key.
+		 */
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+		};
+
 		/*
 		 * The EXTi IRQ line 0 is shared with PMIC,
 		 * so mark this as polled GPIO key.
@@ -60,13 +70,6 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button-1 {
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
 		button-3 {
 			label = "TA4-GPIO-D";
 			linux,code = <KEY_D>;
@@ -82,6 +85,7 @@
 			label = "green:led5";
 			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			status = "disabled";
 		};
 
 		led-1 {
@@ -185,8 +189,8 @@
 	touchscreen@38 {
 		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpiog>;
+		interrupt-parent = <&gpioc>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
 	};
 };
 

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

@@ -12,6 +12,8 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		ethernet1 = &ksz8851;
+		rtc0 = &hwrtc;
+		rtc1 = &rtc;
 	};
 
 	memory@c0000000 {
@@ -138,6 +140,7 @@
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
 			interrupt-parent = <&gpioi>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
@@ -248,7 +251,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	rtc@32 {
+	hwrtc: rtc@32 {
 		compatible = "microcrystal,rv8803";
 		reg = <0x32>;
 	};

arch/arm/boot/dts/versatile-ab.dts

@@ -195,16 +195,15 @@
 		#size-cells = <1>;
 		ranges;
 
-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};
 
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;

arch/arm/boot/dts/versatile-pb.dts

@@ -7,7 +7,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to

arch/arm/configs/integrator_defconfig

@@ -57,10 +57,7 @@ CONFIG_DRM=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y

arch/arm/configs/multi_v7_defconfig

@@ -821,7 +821,7 @@ CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=m
-CONFIG_NOP_USB_XCEIV=m
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_AM335X_PHY_USB=m
 CONFIG_TWL6030_USB=m
 CONFIG_USB_GPIO_VBUS=y

arch/arm/configs/nhk8815_defconfig

@@ -15,8 +15,6 @@ CONFIG_SLAB=y
 CONFIG_ARCH_NOMADIK=y
 CONFIG_MACH_NOMADIK_8815NHK=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -52,9 +50,9 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -97,6 +95,7 @@ CONFIG_REGULATOR=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_TPO_TPG110=y
 CONFIG_DRM_PL111=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -136,9 +135,8 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_DES=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set

arch/arm/configs/realview_defconfig

@@ -64,11 +64,9 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_DRIVERS is not set

arch/arm/configs/shmobile_defconfig

@@ -135,6 +135,7 @@ CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
+CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y