Merge 5.15.33 into android13-5.15
Changes in 5.15.33
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
USB: serial: pl2303: add IBM device IDs
dt-bindings: usb: hcd: correct usb-device path
USB: serial: pl2303: fix GS type detection
USB: serial: simple: add Nokia phone driver
mm: kfence: fix missing objcg housekeeping for SLAB
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
HID: logitech-dj: add new lightspeed receiver id
HID: Add support for open wheel and no attachment to T300
xfrm: fix tunnel model fragmentation behavior
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
virtio_console: break out of buf poll on remove
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
tools/virtio: fix virtio_test execution
ethernet: sun: Free the coherent when failing in probing
gpio: Revert regression in sysfs-gpio (gpiolib.c)
spi: Fix invalid sgs value
net:mcf8390: Use platform_get_irq() to get the interrupt
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
spi: Fix erroneous sgs value with min_t()
Input: zinitix - do not report shadow fingers
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
net: dsa: microchip: add spi_device_id tables
selftests: vm: fix clang build error multiple output files
locking/lockdep: Avoid potential access of invalid memory in lock_class
drm/amdgpu: move PX checking into amdgpu_device_ip_early_init
drm/amdgpu: only check for _PR3 on dGPUs
iommu/iova: Improve 32-bit free space estimate
virtio-blk: Use blk_validate_block_size() to validate block size
tpm: fix reference counting for struct tpm_chip
usb: typec: tipd: Forward plug orientation to typec subsystem
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
xhci: fix garbage USBSTS being logged in some cases
xhci: fix runtime PM imbalance in USB2 resume
xhci: make xhci_handshake timeout for xhci_reset() adjustable
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
mei: me: disable driver on the ign firmware
mei: me: add Alder Lake N device id.
mei: avoid iterator usage outside of list_for_each_entry
bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series
bus: mhi: Fix MHI DMA structure endianness
docs: sphinx/requirements: Limit jinja2<3.1
coresight: Fix TRCCONFIGR.QE sysfs interface
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device
iio: afe: rescale: use s64 for temporary scale calculations
iio: inkern: apply consumer scale on IIO_VAL_INT cases
iio: inkern: apply consumer scale when no channel scale is available
iio: inkern: make a best effort on offset calculation
greybus: svc: fix an error handling bug in gb_svc_hello()
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk: uniphier: Fix fixed-rate initialization
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
cifs: fix handlecache and multiuser
cifs: we do not need a spinlock around the tree access during umount
KEYS: fix length validation in keyctl_pkey_params_get_2()
KEYS: asymmetric: enforce that sig algo matches key algo
KEYS: asymmetric: properly validate hash_algo and encoding
Documentation: add link to stable release candidate tree
Documentation: update stable tree link
firmware: stratix10-svc: add missing callback parameter on RSU
firmware: sysfb: fix platform-device leak in error path
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update
SUNRPC: avoid race between mod_timer() and del_timer_sync()
NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTR
NFSD: prevent underflow in nfssvc_decode_writeargs()
NFSD: prevent integer overflow on 32 bit systems
f2fs: fix to unlock page correctly in error path of is_alive()
f2fs: quota: fix loop condition at f2fs_quota_sync()
f2fs: fix to do sanity check on .cp_pack_total_block_count
remoteproc: Fix count check in rproc_coredump_write()
mm/mlock: fix two bugs in user_shm_lock()
pinctrl: ingenic: Fix regmap on X series SoCs
pinctrl: samsung: drop pin banks references on error paths
net: bnxt_ptp: fix compilation error
spi: mxic: Fix the transmit path
mtd: rawnand: protect access to rawnand devices while in suspend
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
can: m_can: m_can_tx_handler(): fix use after free of skb
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
jffs2: fix memory leak in jffs2_do_mount_fs
jffs2: fix memory leak in jffs2_scan_medium
mm: fs: fix lru_cache_disabled race in bh_lru
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
mm: invalidate hwpoison page cache page in fault path
mempolicy: mbind_range() set_policy() after vma_merge()
scsi: core: sd: Add silence_suspend flag to suppress some PM messages
scsi: ufs: Fix runtime PM messages never-ending cycle
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
qed: display VF trust config
qed: validate and restrict untrusted VFs vlan promisc mode
riscv: dts: canaan: Fix SPI3 bus width
riscv: Fix fill_callchain return value
riscv: Increase stack size under KASAN
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
cifs: prevent bad output lengths in smb2_ioctl_query_info()
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
rtc: mc146818-lib: fix locking in mc146818_set_time
rtc: pl031: fix rtc features null pointer dereference
ocfs2: fix crash when mount with quota enabled
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels
mm: madvise: skip unmapped vma holes passed to process_madvise
mm: madvise: return correct bytes advised with process_madvise
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"
mm,hwpoison: unmap poisoned page before invalidation
mm/kmemleak: reset tag when compare object pointer
dm stats: fix too short end duration_ns when using precise_timestamps
dm: fix use-after-free in dm_cleanup_zoned_dev()
dm: interlock pending dm_io and dm_wait_for_bios_completion
dm: fix double accounting of flush with data
dm integrity: set journal entry unused when shrinking device
tracing: Have trace event string test handle zero length strings
drbd: fix potential silent data corruption
powerpc/kvm: Fix kvm_use_magic_page
PCI: fu740: Force 2.5GT/s for initial device probe
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2
arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs
arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs
arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs
arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: properties: Consistently return -ENOENT if there are no more references
coredump: Also dump first pages of non-executable ELF libraries
ext4: fix ext4_fc_stats trace point
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
ext4: make mb_optimize_scan performance mount option work with extents
drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
samples/landlock: Fix path_list memory leak
landlock: Use square brackets around "landlock-ruleset"
mailbox: tegra-hsp: Flush whole channel
block: limit request dispatch loop duration
block: don't merge across cgroup boundaries if blkcg is enabled
drm/edid: check basic audio support on CEA extension block
fbdev: Hot-unplug firmware fb devices on forced removal
video: fbdev: sm712fb: Fix crash in smtcfb_read()
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
rfkill: make new event layout opt-in
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
ARM: dts: exynos: add missing HDMI supplies on SMDK5250
ARM: dts: exynos: add missing HDMI supplies on SMDK5420
mgag200 fix memmapsl configuration in GCTL6 register
carl9170: fix missing bit-wise or operator for tx_params
pstore: Don't use semaphores in always-atomic-context code
thermal: int340x: Increase bitmap size
lib/raid6/test: fix multiple definition linking error
exec: Force single empty string when argv is empty
crypto: rsa-pkcs1pad - only allow with rsa
crypto: rsa-pkcs1pad - correctly get hash from source scatterlist
crypto: rsa-pkcs1pad - restore signature length check
crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()
bcache: fixup multiple threads crash
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
DEC: Limit PMAX memory probing to R3k systems
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC
media: venus: hfi_cmds: List HDR10 property as unsupported for v1 and v3
media: venus: venc: Fix h264 8x8 transform control
media: davinci: vpif: fix unbalanced runtime PM get
media: davinci: vpif: fix unbalanced runtime PM enable
btrfs: zoned: mark relocation as writing
btrfs: extend locking to all space_info members accesses
btrfs: verify the tranisd of the to-be-written dirty extent buffer
xtensa: define update_mmu_tlb function
xtensa: fix stop_machine_cpuslocked call in patch_text
xtensa: fix xtensa_wsr always writing 0
drm/syncobj: flatten dma_fence_chains on transfer
drm/nouveau/backlight: Fix LVDS backlight detection on some laptops
drm/nouveau/backlight: Just set all backlight types as RAW
drm/fb-helper: Mark screen buffers in system memory with FBINFO_VIRTFB
brcmfmac: firmware: Allocate space for default boardrev in nvram
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path
brcmfmac: pcie: Declare missing firmware files in pcie.c
brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
brcmfmac: pcie: Fix crashes due to early IRQs
drm/i915/opregion: check port number bounds for SWSCI display power state
drm/i915/gem: add missing boundary check in vm_access
PCI: imx6: Allow to probe when dw_pcie_wait_for_link() fails
PCI: pciehp: Clear cmd_busy bit in polling mode
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
regulator: qcom_smd: fix for_each_child.cocci warnings
selinux: access superblock_security_struct in LSM blob way
selinux: check return value of sel_make_avc_files
crypto: ccp - Ensure psp_ret is always init'd in __sev_platform_init_locked()
hwrng: cavium - Check health status while reading random data
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER
crypto: sun8i-ss - really disable hash on A80
crypto: authenc - Fix sleep in atomic context in decrypt_tail
crypto: mxs-dcp - Fix scatterlist processing
selinux: Fix selinux_sb_mnt_opts_compat()
thermal: int340x: Check for NULL after calling kmemdup()
crypto: octeontx2 - remove CONFIG_DM_CRYPT check
spi: tegra114: Add missing IRQ check in tegra_spi_probe
spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe
stack: Constrain and fix stack offset randomization with Clang builds
arm64/mm: avoid fixmap race condition when create pud mapping
blk-cgroup: set blkg iostat after percpu stat aggregation
selftests/x86: Add validity check and allow field splitting
selftests/sgx: Treat CC as one argument
crypto: rockchip - ECB does not need IV
audit: log AUDIT_TIME_* records only from rules
EVM: fix the evm= __setup handler return value
crypto: ccree - don't attempt 0 len DMA mappings
crypto: hisilicon/sec - fix the aead software fallback for engine
spi: pxa2xx-pci: Balance reference count for PCI DMA device
hwmon: (pmbus) Add mutex to regulator ops
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
nvme: cleanup __nvme_check_ids
nvme: fix the check for duplicate unique identifiers
block: don't delete queue kobject before its children
PM: hibernate: fix __setup handler error handling
PM: suspend: fix return value of __setup handler
spi: spi-zynqmp-gqspi: Handle error for dma_set_mask
hwrng: atmel - disable trng on failure path
crypto: sun8i-ss - call finalize with bh disabled
crypto: sun8i-ce - call finalize with bh disabled
crypto: amlogic - call finalize with bh disabled
crypto: gemini - call finalize with bh disabled
crypto: vmx - add missing dependencies
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
clocksource/drivers/exynos_mct: Refactor resources allocation
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
clocksource/drivers/timer-microchip-pit64b: Use notrace
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
arm64: prevent instrumentation of bp hardening callbacks
KEYS: trusted: Fix trusted key backends when building as module
KEYS: trusted: Avoid calling null function trusted_key_exit
ACPI: APEI: fix return value of __setup handlers
crypto: ccp - ccp_dmaengine_unregister release dma channels
crypto: ccree - Fix use after free in cc_cipher_exit()
hwrng: nomadik - Change clk_disable to clk_disable_unprepare
hwmon: (pmbus) Add Vin unit off handling
clocksource: acpi_pm: fix return value of __setup handler
io_uring: don't check unrelated req->open.how in accept request
io_uring: terminate manual loop iterator loop correctly for non-vecs
watch_queue: Fix NULL dereference in error cleanup
watch_queue: Actually free the watch
f2fs: fix to enable ATGC correctly via gc_idle sysfs interface
sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
sched/core: Export pelt_thermal_tp
sched/uclamp: Fix iowait boost escaping uclamp restriction
rseq: Remove broken uapi field layout on 32-bit little endian
perf/core: Fix address filter parser for multiple filters
perf/x86/intel/pt: Fix address filter config for 32-bit kernel
sched/fair: Improve consistency of allowed NUMA balance calculations
f2fs: fix missing free nid in f2fs_handle_failed_inode
nfsd: more robust allocation failure handling in nfsd_file_cache_init
sched/cpuacct: Fix charge percpu cpuusage
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
f2fs: fix to avoid potential deadlock
btrfs: fix unexpected error path when reflinking an inline extent
f2fs: fix compressed file start atomic write may cause data corruption
selftests, x86: fix how check_cc.sh is being invoked
drivers/base/memory: add memory block to memory group after registration succeeded
kunit: make kunit_test_timeout compatible with comment
pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size
media: camss: csid-170: fix non-10bit formats
media: camss: csid-170: don't enable unused irqs
media: camss: csid-170: set the right HALT_CMD when disabled
media: camss: vfe-170: fix "VFE halt timeout" error
media: staging: media: imx: imx7-mipi-csis: Make subdev name unique
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls
media: mtk-vcodec: potential dereference of null pointer
media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation
media: imx: imx8mq-mipi_csi2: fix system resume
media: bttv: fix WARNING regression on tunerless devices
media: atmel: atmel-sama7g5-isc: fix ispck leftover
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting
ASoC: simple-card-utils: Set sysclk on all components
media: coda: Fix missing put_device() call in coda_get_vdoa_data
media: meson: vdec: potential dereference of null pointer
media: hantro: Fix overfill bottom register field name
media: ov6650: Fix set format try processing path
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers
media: ov5648: Don't pack controls struct
media: aspeed: Correct value for h-total-pixels
video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen
video: fbdev: controlfb: Fix COMPILE_TEST build
video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()
video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
ARM: dts: Fix OpenBMC flash layout label addresses
firmware: qcom: scm: Remove reassignment to desc following initializer
ARM: dts: qcom: ipq4019: fix sleep clock
soc: qcom: rpmpd: Check for null return of devm_kcalloc
soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem
soc: qcom: aoss: remove spurious IRQF_ONESHOT flags
arm64: dts: qcom: sdm845: fix microphone bias properties and values
arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema
arm64: dts: broadcom: bcm4908: use proper TWD binding
arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc
arm64: dts: qcom: sm8350: Correct TCS configuration for apps rsc
firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined
soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
vsprintf: Fix potential unaligned access
ARM: dts: imx: Add missing LVDS decoder on M53Menlo
media: mexon-ge2d: fixup frames size in registers
media: video/hdmi: handle short reads of hdmi info frame.
media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats()
media: em28xx: initialize refcount before kref_get
media: usb: go7007: s2250-board: fix leak in probe()
media: cedrus: H265: Fix neighbour info buffer size
media: cedrus: h264: Fix neighbour info buffer size
ASoC: codecs: rx-macro: fix accessing compander for aux
ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type
ASoC: codecs: va-macro: fix accessing array out of bounds for enum type
ASoC: codecs: wc938x: fix accessing array out of bounds for enum type
ASoC: codecs: wcd938x: fix kcontrol max values
ASoC: codecs: wcd934x: fix kcontrol max values
ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put
media: v4l2-core: Initialize h264 scaling matrix
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
selftests/lkdtm: Add UBSAN config
lib: uninline simple_strntoull() as well
vsprintf: Fix %pK with kptr_restrict == 0
uaccess: fix nios2 and microblaze get_user_8()
ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()
soc: mediatek: pm-domains: Add wakeup capacity support in power domain
mmc: sdhci_am654: Fix the driver data of AM64 SoC
ASoC: ti: davinci-i2s: Add check for clk_enable()
ALSA: spi: Add check for clk_enable()
arm64: dts: ns2: Fix spi-cpol and spi-cpha property
arm64: dts: broadcom: Fix sata nodename
printk: fix return value of printk.devkmsg __setup handler
ASoC: mxs-saif: Handle errors for clk_enable
ASoC: atmel_ssc_dai: Handle errors for clk_enable
ASoC: dwc-i2s: Handle errors for clk_enable
ASoC: soc-compress: prevent the potentially use of null pointer
memory: emif: Add check for setup_interrupts
memory: emif: check the pointer temp in get_device_details()
ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
media: vidtv: Check for null return of vzalloc
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
ASoC: wm8350: Handle error for wm8350_register_irq
ASoC: fsi: Add check for clk_enable
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
media: saa7134: fix incorrect use to determine if list is empty
ivtv: fix incorrect device_caps for ivtvfb
ASoC: atmel: Fix error handling in snd_proto_probe
ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe
ASoC: SOF: Add missing of_node_put() in imx8m_probe
ASoC: mediatek: use of_device_get_match_data()
ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe
ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe
ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
ASoC: fsl_spdif: Disable TX clock when stop
ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
ASoC: SOF: Intel: enable DMI L1 for playback streams
ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe
mmc: davinci_mmc: Handle error for clk_enable
ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe
ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe
ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data
ASoC: amd: Fix reference to PCM buffer address
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx
drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops
drm/meson: Make use of the helper function devm_platform_ioremap_resourcexxx()
drm/meson: split out encoder from meson_dw_hdmi
drm/meson: Fix error handling when afbcd.ops->init fails
drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev
drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe
drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe
drm: bridge: adv7511: Fix ADV7535 HPD enablement
ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern
drm/v3d/v3d_drv: Check for error num after setting mask
drm/panfrost: Check for error num after setting mask
libbpf: Fix possible NULL pointer dereference when destroying skeleton
bpftool: Only set obj->skeleton on complete success
udmabuf: validate ubuf->pagecount
bpf: Fix UAF due to race between btf_try_get_module and load_module
drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode
selftests: bpf: Fix bind on used port
Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products
Bluetooth: hci_serdev: call init_rwsem() before p->open()
mtd: onenand: Check for error irq
mtd: rawnand: gpmi: fix controller timings setting
drm/edid: Don't clear formats if using deep color
drm/edid: Split deep color modes between RGB and YUV444
ionic: fix type complaint in ionic_dev_cmd_clean()
ionic: start watchdog after all is setup
ionic: Don't send reset commands if FW isn't running
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()
drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function
net: phy: at803x: move page selection fix to config_init
selftests/bpf: Normalize XDP section names in selftests
selftests/bpf/test_xdp_redirect_multi: use temp netns for testing
ath9k_htc: fix uninit value bugs
RDMA/core: Set MR type in ib_reg_user_mr
KVM: PPC: Fix vmx/vsx mixup in mmio emulation
selftests/net: timestamping: Fix bind_phc check
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
i40e: respect metadata on XSK Rx to skb
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
ixgbe: respect metadata on XSK Rx to skb
power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe
ray_cs: Check ioremap return value
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init
powerpc/perf: Don't use perf_hw_context for trace IMC PMU
mt76: connac: fix sta_rec_wtbl tag len
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
mt76: mt7921: fix a leftover race in runtime-pm
mt76: mt7615: fix a leftover race in runtime-pm
mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
ptp: unregister virtual clocks when unregistering physical clock.
net: dsa: mv88e6xxx: Enable port policy support on 6097
mac80211: Remove a couple of obsolete TODO
mac80211: limit bandwidth in HE capabilities
scripts/dtc: Call pkg-config POSIXly correct
livepatch: Fix build failure on 32 bits processors
net: asix: add proper error handling of usb read errors
i2c: bcm2835: Use platform_get_irq() to get the interrupt
i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'
mtd: mchp23k256: Add SPI ID table
mtd: mchp48l640: Add SPI ID table
igc: avoid kernel warning when changing RX ring parameters
igb: refactor XDP registration
PCI: aardvark: Fix reading MSI interrupt number
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge
RDMA/rxe: Check the last packet by RXE_END_MASK
libbpf: Fix signedness bug in btf_dump_array_data()
cxl/core: Fix cxl_probe_component_regs() error message
cxl/regs: Fix size of CXL Capability Header Register
net:enetc: allocate CBD ring data memory using DMA coherent methods
libbpf: Fix compilation warning due to mismatched printf format
drm/bridge: dw-hdmi: use safe format when first in bridge chain
libbpf: Use dynamically allocated buffer when receiving netlink messages
power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
iommu/ipmmu-vmsa: Check for error num after setting mask
drm/bridge: anx7625: Fix overflow issue on reading EDID
bpftool: Fix the error when lookup in no-btf maps
drm/amd/pm: enable pm sysfs write for one VF mode
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
libbpf: Fix memleak in libbpf_netlink_recv()
IB/cma: Allow XRC INI QPs to set their local ACK timeout
dax: make sure inodes are flushed before destroy cache
selftests: mptcp: add csum mib check for mptcp_connect
iwlwifi: mvm: Don't call iwl_mvm_sta_from_mac80211() with NULL sta
iwlwifi: mvm: don't iterate unadded vifs when handling FW SMPS req
iwlwifi: mvm: align locking in D3 test debugfs
iwlwifi: yoyo: remove DBGI_SRAM address reset writing
iwlwifi: Fix -EIO error code that is never returned
iwlwifi: mvm: Fix an error code in iwl_mvm_up()
mtd: rawnand: pl353: Set the nand chip node as the flash node
drm/msm/dp: populate connector of struct dp_panel
drm/msm/dp: stop link training after link training 2 failed
drm/msm/dp: always add fail-safe mode into connector mode list
drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent
drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode
drm/msm/dpu: add DSPP blocks teardown
drm/msm/dpu: fix dp audio condition
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS
vfio/pci: fix memory leak during D3hot to D0 transition
vfio/pci: wake-up devices around reset functions
scsi: fnic: Fix a tracing statement
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()
scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()
scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()
scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()
scsi: pm8001: Fix NCQ NON DATA command task initialization
scsi: pm8001: Fix NCQ NON DATA command completion handling
scsi: pm8001: Fix abort all task initialization
RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR
drm/amd/display: Remove vupdate_int_entry definition
TOMOYO: fix __setup handlers return values
power: supply: sbs-charger: Don't cancel work that is not initialized
ext2: correct max file size computing
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return
scsi: hisi_sas: Change permission of parameter prot_mask
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
bpf, arm64: Call build_prologue() first in first JIT pass
bpf, arm64: Feed byte-offset into bpf line info
xsk: Fix race at socket teardown
RDMA/irdma: Fix netdev notifications for vlan's
RDMA/irdma: Fix Passthrough mode in VM
RDMA/irdma: Remove incorrect masking of PD
gpu: host1x: Fix a memory leak in 'host1x_remove()'
libbpf: Skip forward declaration when counting duplicated type names
powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()
powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit
KVM: x86: Fix emulation in writing cr8
KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
hv_balloon: rate-limit "Unhandled message" warning
i2c: xiic: Make bus names unique
power: supply: wm8350-power: Handle error for wm8350_register_irq
power: supply: wm8350-power: Add missing free in free_charger_irq
IB/hfi1: Allow larger MTU without AIP
RDMA/core: Fix ib_qp_usecnt_dec() called when error
PCI: Reduce warnings on possible RW1C corruption
net: axienet: fix RX ring refill allocation failure handling
drm/msm/a6xx: Fix missing ARRAY_SIZE() check
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
powerpc/sysdev: fix incorrect use to determine if list is empty
powerpc/64s: Don't use DSISR for SLB faults
mfd: mc13xxx: Add check for mc13xxx_irq_request
libbpf: Unmap rings when umem deleted
selftests/bpf: Make test_lwt_ip_encap more stable and faster
platform/x86: huawei-wmi: check the return value of device_create_file()
scsi: mpt3sas: Fix incorrect 4GB boundary check
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
vxcan: enable local echo for sent CAN frames
ath10k: Fix error handling in ath10k_setup_msa_resources
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
MIPS: RB532: fix return value of __setup handler
MIPS: pgalloc: fix memory leak caused by pgd_free()
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
power: ab8500_chargalg: Use CLOCK_MONOTONIC
RDMA/irdma: Prevent some integer underflows
Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
bpf, sockmap: Fix memleak in sk_psock_queue_msg
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full
bpf, sockmap: Fix more uncharged while msg has more_data
bpf, sockmap: Fix double uncharge the mem of sk_msg
samples/bpf, xdpsock: Fix race when running for fix duration of time
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
drm/i915/display: Fix HPD short pulse handling for eDP
netfilter: flowtable: Fix QinQ and pppoe support for inet table
mt76: mt7921: fix mt7921_queues_acq implementation
can: isotp: sanitize CAN ID checks in isotp_bind()
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket
can: isotp: support MSG_TRUNC flag when reading from socket
bareudp: use ipv6_mod_enabled to check if IPv6 enabled
ibmvnic: fix race between xmit and reset
af_unix: Fix some data-races around unix_sk(sk)->oob_skb.
selftests/bpf: Fix error reporting from sock_fields programs
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates
af_netlink: Fix shift out of bounds in group mask calculation
i2c: meson: Fix wrong speed use from probe
netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
powerpc/pseries: Fix use after free in remove_phb_dynamic()
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
PCI: Avoid broken MSI on SB600 USB devices
net: bcmgenet: Use stronger register read/writes to assure ordering
tcp: ensure PMTU updates are processed during fastopen
openvswitch: always update flow key after nat
net: dsa: fix panic on shutdown if multi-chip tree failed to probe
tipc: fix the timer expires after interval 100ms
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
ice: fix 'scheduling while atomic' on aux critical err interrupt
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
kernel/resource: fix kfree() of bootmem memory again
staging: r8188eu: convert DBG_88E_LEVEL call in hal/rtl8188e_hal_init.c
staging: r8188eu: release_firmware is not called if allocation fails
mxser: fix xmit_buf leak in activate when LSR == 0xff
fsi: scom: Fix error handling
fsi: scom: Remove retries in indirect scoms
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
pps: clients: gpio: Propagate return value from pps_gpio_probe
fsi: Aspeed: Fix a potential double free
misc: alcor_pci: Fix an error handling path
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
soundwire: intel: fix wrong register name in intel_shim_wake
clk: qcom: ipq8074: fix PCI-E clock oops
dmaengine: idxd: check GENCAP config support for gencfg register
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: restore traffic class defaults after wq reset
iio: mma8452: Fix probe failing when an i2c_device_id is used
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel
pinctrl: renesas: checker: Fix miscalculation of number of states
clk: qcom: ipq8074: Use floor ops for SDCC1 clock
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})
phy: phy-brcm-usb: fixup BCM4908 support
serial: 8250_mid: Balance reference count for PCI DMA device
serial: 8250_lpss: Balance reference count for PCI DMA device
NFS: Use of mapping_set_error() results in spurious errors
serial: 8250: Fix race condition in RTS-after-send handling
iio: adc: Add check for devm_request_threaded_irq
habanalabs: Add check for pci_enable_device
NFS: Return valid errors from nfs2/3_decode_dirent()
staging: r8188eu: fix endless loop in recv_func
dma-debug: fix return value of __setup handlers
clk: imx7d: Remove audio_mclk_root_clk
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()
clk: at91: sama7g5: fix parents of PDMCs' GCLK
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
clk: qcom: clk-rcg2: Update the frac table for pixel clock
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
nvdimm/region: Fix default alignment for small regions
clk: actions: Terminate clk_div_table with sentinel element
clk: loongson1: Terminate clk_div_table with sentinel element
clk: hisilicon: Terminate clk_div_table with sentinel element
clk: clps711x: Terminate clk_div_table with sentinel element
clk: Fix clk_hw_get_clk() when dev is NULL
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
mailbox: imx: fix crash in resume on i.mx8ulp
NFS: remove unneeded check in decode_devicenotify_args()
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree
staging: mt7621-dts: fix formatting
staging: mt7621-dts: fix pinctrl properties for ethernet
staging: mt7621-dts: fix GB-PC2 devicetree
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()
pinctrl: mediatek: paris: Fix pingroup pin config state readback
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs
pinctrl: microchip sgpio: use reset driver
pinctrl: microchip-sgpio: lock RMW access
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
tty: hvc: fix return value of __setup handler
kgdboc: fix return value of __setup handler
serial: 8250: fix XOFF/XON sending when DMA is used
virt: acrn: obtain pa from VMA with PFNMAP flag
virt: acrn: fix a memory leak in acrn_dev_ioctl()
kgdbts: fix return value of __setup handler
firmware: google: Properly state IOMEM dependency
driver core: dd: fix return value of __setup handler
jfs: fix divide error in dbNextAG
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
SUNRPC don't resend a task on an offlined transport
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
kdb: Fix the putarea helper function
perf stat: Fix forked applications enablement of counters
clk: qcom: gcc-msm8994: Fix gpll4 width
vsock/virtio: initialize vdev->priv before using VQs
vsock/virtio: read the negotiated features before using VQs
vsock/virtio: enable VQs early on probe
clk: Initialize orphan req_rate
xen: fix is_xen_pmu()
net: enetc: report software timestamping via SO_TIMESTAMPING
net: hns3: fix bug when PF set the duplicate MAC address for VFs
net: hns3: fix port base vlan add fail when concurrent with reset
net: hns3: add vlan list lock to protect vlan list
net: hns3: format the output of the MAC address
net: hns3: refine the process when PF set VF VLAN
net: phy: broadcom: Fix brcm_fet_config_init()
selftests: test_vxlan_under_vrf: Fix broken test case
NFS: Don't loop forever in nfs_do_recoalesce()
net: hns3: clean residual vf config after disable sriov
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
qlcnic: dcb: default to returning -EOPNOTSUPP
net/x25: Fix null-ptr-deref caused by x25_disconnect
net: sparx5: switchdev: fix possible NULL pointer dereference
octeontx2-af: initialize action variable
net: prefer nf_ct_put instead of nf_conntrack_put
net/sched: act_ct: fix ref leak when switching zones
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
fs: fd tables have to be multiples of BITS_PER_LONG
lib/test: use after free in register_test_dev_kmod()
fs: fix fd table size alignment properly
LSM: general protection fault in legacy_parse_param
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos
gcc-plugins/stackleak: Exactly match strings instead of prefixes
pinctrl: npcm: Fix broken references to chip->parent_device
rcu: Mark writes to the rcu_segcblist structure's ->flags field
block/bfq_wf2q: correct weight to ioprio
crypto: xts - Add softdep on ecb
crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3
block, bfq: don't move oom_bfqq
selinux: use correct type for context length
arm64: module: remove (NOLOAD) from linker script
selinux: allow FIOCLEX and FIONCLEX with policy capability
loop: use sysfs_emit() in the sysfs xxx show()
Fix incorrect type in assignment of ipv6 port for audit
irqchip/qcom-pdc: Fix broken locking
irqchip/nvic: Release nvic_base upon failure
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
bfq: fix use-after-free in bfq_dispatch_request
ACPICA: Avoid walking the ACPI Namespace if it is not there
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
Revert "Revert "block, bfq: honor already-setup queue merges""
ACPI/APEI: Limit printable size of BERT table data
PM: core: keep irq flags in device_pm_check_callbacks()
parisc: Fix handling off probe non-access faults
nvme-tcp: lockdep: annotate in-kernel sockets
spi: tegra20: Use of_device_get_match_data()
atomics: Fix atomic64_{read_acquire,set_release} fallbacks
locking/lockdep: Iterate lock_classes directly when reading lockdep files
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
ext4: don't BUG if someone dirty pages without asking ext4 first
f2fs: fix to do sanity check on curseg->alloc_type
NFSD: Fix nfsd_breaker_owns_lease() return values
f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs
btrfs: harden identification of a stale device
btrfs: make search_csum_tree return 0 if we get -EFBIG
f2fs: use spin_lock to avoid hang
f2fs: compress: fix to print raw data size in error path of lz4 decompression
Adjust cifssb maximum read size
ntfs: add sanity check on allocation size
media: staging: media: zoran: move videodev alloc
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
media: staging: media: zoran: fix various V4L2 compliance errors
media: atmel: atmel-isc-base: report frame sizes as full supported range
media: ir_toy: free before error exiting
ASoC: sh: rz-ssi: Make the data structures available before registering the handlers
ASoC: SOF: Intel: match sdw version on link_slaves_found
media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers
media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has
media: iommu/mediatek: Return ENODEV if the device is NULL
media: iommu/mediatek: Add device_link between the consumer and the larb devices
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
video: fbdev: w100fb: Reset global state
video: fbdev: cirrusfb: check pixclock to avoid divide by zero
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ASoC: madera: Add dependencies on MFD
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo
ARM: ftrace: avoid redundant loads or clobbering IP
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
arm64: defconfig: build imx-sdma as a module
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ASoC: soc-core: skip zero num_dai component in searching dai name
media: imx-jpeg: fix a bug of accessing array out of bounds
media: cx88-mpeg: clear interrupt status register before streaming video
uaccess: fix type mismatch warnings from access_ok()
lib/test_lockup: fix kernel pointer check for separate address spaces
ARM: tegra: tamonten: Fix I2C3 pad setting
ARM: mmp: Fix failure to remove sram device
ASoC: amd: vg: fix for pm resume callback sequence
video: fbdev: sm712fb: Fix crash in smtcfb_write()
media: i2c: ov5648: Fix lockdep error
media: Revert "media: em28xx: add missing em28xx_close_extension"
media: hdpvr: initialize dev->worker at hdpvr_register_videodev
ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13"
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
mmc: host: Return an error when ->enable_sdio_irq() ops is missing
media: atomisp: fix bad usage at error handling logic
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
KVM: x86: Reinitialize context if host userspace toggles EFER.LME
KVM: x86/mmu: Move "invalid" check out of kvm_tdp_mmu_get_root()
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_send_ipi()
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_flush_tlb()
KVM: x86: hyper-v: Fix the maximum number of sparse banks for XMM fast TLB flush hypercalls
KVM: x86: hyper-v: HVCALL_SEND_IPI_EX is an XMM fast hypercall
powerpc/kasan: Fix early region not updated correctly
powerpc/lib/sstep: Fix 'sthcx' instruction
powerpc/lib/sstep: Fix build errors with newer binutils
powerpc: Add set_memory_{p/np}() and remove set_memory_attr()
powerpc: Fix build errors with newer binutils
drm/dp: Fix off-by-one in register cache size
drm/i915: Treat SAGV block time 0 as SAGV disabled
drm/i915: Fix PSF GV point mask when SAGV is not possible
drm/i915: Reject unsupported TMDS rates on ICL+
scsi: qla2xxx: Refactor asynchronous command initialization
scsi: qla2xxx: Implement ref count for SRB
scsi: qla2xxx: Fix stuck session in gpdb
scsi: qla2xxx: Fix warning message due to adisc being flushed
scsi: qla2xxx: Fix scheduling while atomic
scsi: qla2xxx: Fix premature hw access after PCI error
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter
scsi: qla2xxx: Fix warning for missing error code
scsi: qla2xxx: Fix device reconnect in loop topology
scsi: qla2xxx: edif: Fix clang warning
scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
scsi: qla2xxx: Add devids and conditionals for 28xx
scsi: qla2xxx: Check for firmware dump already collected
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
scsi: qla2xxx: Fix disk failure to rediscover
scsi: qla2xxx: Fix incorrect reporting of task management failure
scsi: qla2xxx: Fix hang due to session stuck
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests
scsi: qla2xxx: Fix N2N inconsistent PLOGI
scsi: qla2xxx: Fix stuck session of PRLI reject
scsi: qla2xxx: Reduce false trigger to login
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
platform: chrome: Split trace include file
KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irq
KVM: x86: Avoid theoretical NULL pointer dereference in kvm_irq_delivery_to_apic_fast()
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
KVM: Prevent module exit until all VMs are freed
KVM: x86: fix sending PV IPI
KVM: SVM: fix panic on out-of-bounds guest IRQ
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
ubifs: Rename whiteout atomically
ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work
ubifs: Rectify space amount budget for mkdir/tmpfile operations
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
ubifs: Fix to add refcount once page is set private
ubifs: rename_whiteout: correct old_dir size computing
nvme: allow duplicate NSIDs for private namespaces
nvme: fix the read-only state for zoned namespaces with unsupposed features
wireguard: queueing: use CFI-safe ptr_ring cleanup function
wireguard: socket: free skb in send6 when ipv6 is disabled
wireguard: socket: ignore v6 endpoints when ipv6 is disabled
XArray: Fix xas_create_range() when multi-order entry present
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
can: mcba_usb: properly check endpoint type
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
XArray: Update the LRU list in xas_split()
modpost: restore the warning message for missing symbol versions
rtc: check if __rtc_read_time was successful
gfs2: gfs2_setattr_size error path fix
gfs2: Make sure FITRIM minlen is rounded up to fs block size
net: hns3: fix the concurrency between functions reading debugfs
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
mailbox: imx: fix wakeup failure from freeze mode
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
watch_queue: Free the page array when watch_queue is dismantled
pinctrl: pinconf-generic: Print arguments for bias-pull-*
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
net: sparx5: uses, depends on BRIDGE or !BRIDGE
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
ARM: iop32x: offset IRQ numbers by 1
block: Fix the maximum minor value is blk_alloc_ext_minor()
io_uring: fix memory leak of uid in files registration
riscv module: remove (NOLOAD)
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
vhost: handle error while adding split ranges to iotlb
spi: Fix Tegra QSPI example
platform/chrome: cros_ec_typec: Check for EC device
can: isotp: restore accidentally removed MSG_PEEK feature
proc: bootconfig: Add null pointer check
drm/connector: Fix typo in documentation
scsi: qla2xxx: Add qla2x00_async_done() for async routines
staging: mt7621-dts: fix pinctrl-0 items to be size-1 items on ethernet
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
ASoC: soc-compress: Change the check for codec_dai
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
tracing: Have type enum modifications copy the strings
net: add skb_set_end_offset() helper
net: preserve skb_end_offset() in skb_unclone_keeptruesize()
mm/mmap: return 1 from stack_guard_gap __setup() handler
ARM: 9187/1: JIVE: fix return value of __setup handler
mm/memcontrol: return 1 from cgroup.memory __setup() handler
mm/usercopy: return 1 from hardened_usercopy __setup() handler
af_unix: Support POLLPRI for OOB.
bpf: Adjust BPF stack helper functions to accommodate skip > 0
bpf: Fix comment for helper bpf_current_task_under_cgroup()
mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM
dt-bindings: mtd: nand-controller: Fix the reg property description
dt-bindings: mtd: nand-controller: Fix a comment in the examples
dt-bindings: spi: mxic: The interrupt property is not mandatory
dt-bindings: memory: mtk-smi: No need mediatek,larb-id for mt8167
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Fix example
ubi: fastmap: Return error code if memory allocation fails in add_aeb()
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ASoC: topology: Allow TLV control to be either read or write
perf vendor events: Update metrics for SkyLake Server
media: ov6650: Add try support to selection API operations
media: ov6650: Fix crop rectangle affected by set format
spi: mediatek: support tick_delay without enhance_timing
ARM: dts: spear1340: Update serial node properties
ARM: dts: spear13xx: Update SPI dma properties
arm64: dts: ls1043a: Update i2c dma properties
arm64: dts: ls1046a: Update i2c node dma properties
um: Fix uml_mconsole stop/go
docs: sysctl/kernel: add missing bit to panic_print
openvswitch: Fixed nd target mask field in the flow dump.
torture: Make torture.sh help message match reality
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
mmc: rtsx: Let MMC core handle runtime PM
mmc: rtsx: Fix build errors/warnings for unused variable
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
iommu/dma: Skip extra sync during unmap w/swiotlb
iommu/dma: Fold _swiotlb helpers into callers
iommu/dma: Check CONFIG_SWIOTLB more broadly
swiotlb: Support aligned swiotlb buffers
iommu/dma: Account for min_align_mask w/swiotlb
coredump: Snapshot the vmas in do_coredump
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump/elf: Pass coredump_params into fill_note_info
coredump: Use the vma snapshot in fill_files_note
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
Linux 5.15.33
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id62bd8a22d0bfa7c2096539d253ffce804bed017
This commit is contained in:
Greg Kroah-Hartman
@@ -3474,8 +3474,7 @@
|
||||
difficult since unequal pointers can no longer be
|
||||
compared. However, if this command-line option is
|
||||
specified, then all normal pointers will have their true
|
||||
value printed. Pointers printed via %pK may still be
|
||||
hashed. This option should only be specified when
|
||||
value printed. This option should only be specified when
|
||||
debugging the kernel. Please do not use on production
|
||||
kernels.
|
||||
|
||||
|
||||
@@ -795,6 +795,7 @@ bit 1 print system memory info
|
||||
bit 2 print timer info
|
||||
bit 3 print locks info if ``CONFIG_LOCKDEP`` is on
|
||||
bit 4 print ftrace buffer
|
||||
bit 5 print all printk messages in buffer
|
||||
===== ============================================
|
||||
|
||||
So for example to print tasks and memory info on panic, user can::
|
||||
|
||||
@@ -106,7 +106,6 @@ allOf:
|
||||
- mediatek,mt2701-smi-larb
|
||||
- mediatek,mt2712-smi-larb
|
||||
- mediatek,mt6779-smi-larb
|
||||
- mediatek,mt8167-smi-larb
|
||||
- mediatek,mt8192-smi-larb
|
||||
|
||||
then:
|
||||
|
||||
@@ -55,7 +55,7 @@ patternProperties:
|
||||
properties:
|
||||
reg:
|
||||
description:
|
||||
Contains the native Ready/Busy IDs.
|
||||
Contains the chip-select IDs.
|
||||
|
||||
nand-ecc-engine:
|
||||
allOf:
|
||||
@@ -184,7 +184,7 @@ examples:
|
||||
nand-use-soft-ecc-engine;
|
||||
nand-ecc-algo = "bch";
|
||||
|
||||
/* controller specific properties */
|
||||
/* NAND chip specific properties */
|
||||
};
|
||||
|
||||
nand@1 {
|
||||
|
||||
@@ -138,7 +138,7 @@ examples:
|
||||
clocks = <&sys_clk>;
|
||||
pinctrl-0 = <&sgpio2_pins>;
|
||||
pinctrl-names = "default";
|
||||
reg = <0x1101059c 0x100>;
|
||||
reg = <0x1101059c 0x118>;
|
||||
microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
|
||||
bus-frequency = <25000000>;
|
||||
sgpio_in2: gpio@0 {
|
||||
|
||||
@@ -106,7 +106,7 @@ examples:
|
||||
dma-names = "rx", "tx";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spi-nor";
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <104000000>;
|
||||
spi-tx-bus-width = <2>;
|
||||
|
||||
@@ -8,11 +8,13 @@ Required properties:
|
||||
- reg: should contain 2 entries, one for the registers and one for the direct
|
||||
mapping area
|
||||
- reg-names: should contain "regs" and "dirmap"
|
||||
- interrupts: interrupt line connected to the SPI controller
|
||||
- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
|
||||
- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
|
||||
"send_dly_clk" clocks
|
||||
|
||||
Optional properties:
|
||||
- interrupts: interrupt line connected to the SPI controller
|
||||
|
||||
Example:
|
||||
|
||||
spi@43c30000 {
|
||||
|
||||
@@ -33,7 +33,7 @@ patternProperties:
|
||||
"^.*@[0-9a-f]{1,2}$":
|
||||
description: The hard wired USB devices
|
||||
type: object
|
||||
$ref: /usb/usb-device.yaml
|
||||
$ref: /schemas/usb/usb-device.yaml
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
|
||||
@@ -168,7 +168,16 @@ Trees
|
||||
- The finalized and tagged releases of all stable kernels can be found
|
||||
in separate branches per version at:
|
||||
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
|
||||
|
||||
- The release candidate of all stable kernel versions can be found at:
|
||||
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
|
||||
|
||||
.. warning::
|
||||
The -stable-rc tree is a snapshot in time of the stable-queue tree and
|
||||
will change frequently, hence will be rebased often. It should only be
|
||||
used for testing purposes (e.g. to be consumed by CI systems).
|
||||
|
||||
|
||||
Review committee
|
||||
|
||||
@@ -261,6 +261,10 @@ alc-sense-combo
|
||||
huawei-mbx-stereo
|
||||
Enable initialization verbs for Huawei MBX stereo speakers;
|
||||
might be risky, try this at your own risk
|
||||
alc298-samsung-headphone
|
||||
Samsung laptops with ALC298
|
||||
alc256-samsung-headphone
|
||||
Samsung laptops with ALC256
|
||||
|
||||
ALC66x/67x/892
|
||||
==============
|
||||
|
||||
@@ -1,2 +1,4 @@
|
||||
# jinja2>=3.1 is not compatible with Sphinx<4.0
|
||||
jinja2<3.1
|
||||
sphinx_rtd_theme
|
||||
Sphinx==2.4.4
|
||||
|
||||
2
Makefile
2
Makefile
@@ -1,7 +1,7 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
VERSION = 5
|
||||
PATCHLEVEL = 15
|
||||
SUBLEVEL = 32
|
||||
SUBLEVEL = 33
|
||||
EXTRAVERSION =
|
||||
NAME = Trick or Treat
|
||||
|
||||
|
||||
@@ -1141,6 +1141,7 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
|
||||
config RANDOMIZE_KSTACK_OFFSET_DEFAULT
|
||||
bool "Randomize kernel stack offset on syscall entry"
|
||||
depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
|
||||
depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
|
||||
help
|
||||
The kernel stack offset can be randomized (after pt_regs) by
|
||||
roughly 5 bits of entropy, frustrating memory corruption
|
||||
|
||||
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
|
||||
return task_thread_info(current)->thr_ptr;
|
||||
}
|
||||
|
||||
SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
|
||||
SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
|
||||
{
|
||||
struct pt_regs *regs = current_pt_regs();
|
||||
u32 uval;
|
||||
|
||||
@@ -459,12 +459,26 @@
|
||||
#size-cells = <0>;
|
||||
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
|
||||
|
||||
/* Source for d/i-cache-line-size and d/i-cache-sets
|
||||
* https://developer.arm.com/documentation/100095/0003
|
||||
* /Level-1-Memory-System/About-the-L1-memory-system?lang=en
|
||||
* Source for d/i-cache-size
|
||||
* https://www.raspberrypi.com/documentation/computers
|
||||
* /processors.html#bcm2711
|
||||
*/
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000d8>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
i-cache-size = <0xc000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
@@ -473,6 +487,13 @@
|
||||
reg = <1>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000e0>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
i-cache-size = <0xc000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
@@ -481,6 +502,13 @@
|
||||
reg = <2>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000e8>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
i-cache-size = <0xc000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
@@ -489,6 +517,28 @@
|
||||
reg = <3>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000f0>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
i-cache-size = <0xc000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
/* Source for d/i-cache-line-size and d/i-cache-sets
|
||||
* https://developer.arm.com/documentation/100095/0003
|
||||
* /Level-2-Memory-System/About-the-L2-memory-system?lang=en
|
||||
* Source for d/i-cache-size
|
||||
* https://www.raspberrypi.com/documentation/computers
|
||||
* /processors.html#bcm2711
|
||||
*/
|
||||
l2: l2-cache0 {
|
||||
compatible = "cache";
|
||||
cache-size = <0x100000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
|
||||
cache-level = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -40,12 +40,26 @@
|
||||
#size-cells = <0>;
|
||||
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
|
||||
|
||||
/* Source for d/i-cache-line-size and d/i-cache-sets
|
||||
* https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
|
||||
* /about-the-l1-memory-system?lang=en
|
||||
*
|
||||
* Source for d/i-cache-size
|
||||
* https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
|
||||
*/
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000d8>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
@@ -54,6 +68,13 @@
|
||||
reg = <1>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000e0>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
@@ -62,6 +83,13 @@
|
||||
reg = <2>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000e8>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
@@ -70,6 +98,27 @@
|
||||
reg = <3>;
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x000000f0>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
/* Source for cache-line-size + cache-sets
|
||||
* https://developer.arm.com/documentation/ddi0500
|
||||
* /e/level-2-memory-system/about-the-l2-memory-system?lang=en
|
||||
* Source for cache-size
|
||||
* https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
|
||||
*/
|
||||
l2: l2-cache0 {
|
||||
compatible = "cache";
|
||||
cache-size = <0x80000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
|
||||
cache-level = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -3482,8 +3482,7 @@
|
||||
ti,timer-pwm;
|
||||
};
|
||||
};
|
||||
|
||||
target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
|
||||
timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
|
||||
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
||||
reg = <0x2c000 0x4>,
|
||||
<0x2c010 0x4>;
|
||||
@@ -3511,7 +3510,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
|
||||
timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
|
||||
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
||||
reg = <0x2e000 0x4>,
|
||||
<0x2e010 0x4>;
|
||||
|
||||
@@ -1320,20 +1320,20 @@
|
||||
};
|
||||
|
||||
/* Local timers, see ARM architected timer wrap erratum i940 */
|
||||
&timer3_target {
|
||||
&timer15_target {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle;
|
||||
timer@0 {
|
||||
assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
|
||||
assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
|
||||
assigned-clock-parents = <&timer_sys_clk_div>;
|
||||
};
|
||||
};
|
||||
|
||||
&timer4_target {
|
||||
&timer16_target {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle;
|
||||
timer@0 {
|
||||
assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
|
||||
assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
|
||||
assigned-clock-parents = <&timer_sys_clk_div>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -260,7 +260,7 @@
|
||||
};
|
||||
|
||||
uart3_data: uart3-data {
|
||||
samsung,pins = "gpa1-4", "gpa1-4";
|
||||
samsung,pins = "gpa1-4", "gpa1-5";
|
||||
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
|
||||
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
||||
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
||||
|
||||
@@ -118,6 +118,9 @@
|
||||
status = "okay";
|
||||
ddc = <&i2c_2>;
|
||||
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
||||
vdd-supply = <&ldo8_reg>;
|
||||
vdd_osc-supply = <&ldo10_reg>;
|
||||
vdd_pll-supply = <&ldo8_reg>;
|
||||
};
|
||||
|
||||
&i2c_0 {
|
||||
|
||||
@@ -124,6 +124,9 @@
|
||||
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_hpd_irq>;
|
||||
vdd-supply = <&ldo6_reg>;
|
||||
vdd_osc-supply = <&ldo7_reg>;
|
||||
vdd_pll-supply = <&ldo6_reg>;
|
||||
};
|
||||
|
||||
&hsi2c_4 {
|
||||
|
||||
@@ -53,6 +53,31 @@
|
||||
};
|
||||
};
|
||||
|
||||
lvds-decoder {
|
||||
compatible = "ti,ds90cf364a", "lvds-decoder";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
lvds_decoder_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
lvds_decoder_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "edt,etm0700g0dh6";
|
||||
pinctrl-0 = <&pinctrl_display_gpio>;
|
||||
@@ -61,7 +86,7 @@
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
remote-endpoint = <&lvds_decoder_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -450,7 +475,7 @@
|
||||
reg = <2>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
remote-endpoint = <&lvds_decoder_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -40,7 +40,7 @@
|
||||
|
||||
dailink_master: simple-audio-card,codec {
|
||||
sound-dai = <&codec>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -293,7 +293,7 @@
|
||||
compatible = "fsl,sgtl5000";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sai1_mclk>;
|
||||
VDDA-supply = <®_module_3v3_avdd>;
|
||||
|
||||
@@ -264,7 +264,7 @@
|
||||
tlv320aic32x4: audio-codec@18 {
|
||||
compatible = "ti,tlv320aic32x4";
|
||||
reg = <0x18>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
clock-names = "mclk";
|
||||
ldoin-supply = <®_audio_3v3>;
|
||||
iov-supply = <®_audio_3v3>;
|
||||
|
||||
@@ -288,7 +288,7 @@
|
||||
codec: wm8960@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
clock-names = "mclk";
|
||||
wlf,shared-lrclk;
|
||||
};
|
||||
|
||||
@@ -31,7 +31,7 @@
|
||||
|
||||
dailink_master: simple-audio-card,codec {
|
||||
sound-dai = <&sgtl5000>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -41,7 +41,7 @@
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x0a>;
|
||||
compatible = "fsl,sgtl5000";
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_vref_1v8>;
|
||||
};
|
||||
|
||||
@@ -31,7 +31,7 @@
|
||||
|
||||
dailink_master: simple-audio-card,codec {
|
||||
sound-dai = <&sgtl5000>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -41,7 +41,7 @@
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x0a>;
|
||||
compatible = "fsl,sgtl5000";
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_vref_1v8>;
|
||||
};
|
||||
|
||||
@@ -385,14 +385,14 @@
|
||||
codec: wm8960@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
clock-names = "mclk";
|
||||
wlf,shared-lrclk;
|
||||
wlf,hp-cfg = <2 2 3>;
|
||||
wlf,gpio-cfg = <1 3>;
|
||||
assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
|
||||
<&clks IMX7D_PLL_AUDIO_POST_DIV>,
|
||||
<&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
<&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
|
||||
assigned-clock-rates = <0>, <884736000>, <12288000>;
|
||||
};
|
||||
|
||||
@@ -75,7 +75,7 @@
|
||||
|
||||
dailink_master: simple-audio-card,codec {
|
||||
sound-dai = <&codec>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -232,7 +232,7 @@
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x0a>;
|
||||
compatible = "fsl,sgtl5000";
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
||||
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sai1_mclk>;
|
||||
VDDA-supply = <&vgen4_reg>;
|
||||
|
||||
@@ -28,7 +28,7 @@ partitions {
|
||||
label = "rofs";
|
||||
};
|
||||
|
||||
rwfs@6000000 {
|
||||
rwfs@2a00000 {
|
||||
reg = <0x2a00000 0x1600000>; // 22MB
|
||||
label = "rwfs";
|
||||
};
|
||||
|
||||
@@ -20,7 +20,7 @@ partitions {
|
||||
label = "kernel";
|
||||
};
|
||||
|
||||
rofs@c0000 {
|
||||
rofs@4c0000 {
|
||||
reg = <0x4c0000 0x1740000>;
|
||||
label = "rofs";
|
||||
};
|
||||
|
||||
@@ -142,7 +142,8 @@
|
||||
clocks {
|
||||
sleep_clk: sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
clock-frequency = <32000>;
|
||||
clock-output-names = "gcc_sleep_clk_src";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
|
||||
@@ -146,7 +146,9 @@
|
||||
reg = <0x108000 0x1000>;
|
||||
qcom,ipc = <&l2cc 0x8 2>;
|
||||
|
||||
interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
|
||||
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "ack", "err", "wakeup";
|
||||
|
||||
regulators {
|
||||
@@ -192,7 +194,7 @@
|
||||
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||
reg = <0x16440000 0x1000>,
|
||||
<0x16400000 0x1000>;
|
||||
interrupts = <0 154 0x0>;
|
||||
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
@@ -318,7 +320,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x16080000 0x1000>;
|
||||
interrupts = <0 147 0>;
|
||||
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <24000000>;
|
||||
cs-gpios = <&msmgpio 8 0>;
|
||||
|
||||
|
||||
@@ -413,7 +413,7 @@
|
||||
pmecc: ecc-engine@f8014070 {
|
||||
compatible = "atmel,sama5d2-pmecc";
|
||||
reg = <0xf8014070 0x490>,
|
||||
<0xf8014500 0x100>;
|
||||
<0xf8014500 0x200>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -319,8 +319,6 @@
|
||||
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
|
||||
<&dma0 AT91_XDMAC_DT_PERID(8)>;
|
||||
dma-names = "rx", "tx";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
@@ -485,8 +483,6 @@
|
||||
dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
|
||||
<&dma0 AT91_XDMAC_DT_PERID(22)>;
|
||||
dma-names = "rx", "tx";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
@@ -511,8 +507,6 @@
|
||||
dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
|
||||
<&dma0 AT91_XDMAC_DT_PERID(24)>;
|
||||
dma-names = "rx", "tx";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -136,9 +136,9 @@
|
||||
reg = <0xb4100000 0x1000>;
|
||||
interrupts = <0 105 0x4>;
|
||||
status = "disabled";
|
||||
dmas = <&dwdma0 12 0 1>,
|
||||
<&dwdma0 13 1 0>;
|
||||
dma-names = "tx", "rx";
|
||||
dmas = <&dwdma0 13 0 1>,
|
||||
<&dwdma0 12 1 0>;
|
||||
dma-names = "rx", "tx";
|
||||
};
|
||||
|
||||
thermal@e07008c4 {
|
||||
|
||||
@@ -284,9 +284,9 @@
|
||||
#size-cells = <0>;
|
||||
interrupts = <0 31 0x4>;
|
||||
status = "disabled";
|
||||
dmas = <&dwdma0 4 0 0>,
|
||||
<&dwdma0 5 0 0>;
|
||||
dma-names = "tx", "rx";
|
||||
dmas = <&dwdma0 5 0 0>,
|
||||
<&dwdma0 4 0 0>;
|
||||
dma-names = "rx", "tx";
|
||||
};
|
||||
|
||||
rtc@e0580000 {
|
||||
|
||||
@@ -593,6 +593,17 @@
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
gic: interrupt-controller@1c81000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x01c81000 0x1000>,
|
||||
<0x01c82000 0x2000>,
|
||||
<0x01c84000 0x2000>,
|
||||
<0x01c86000 0x2000>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
csi1: camera@1cb4000 {
|
||||
compatible = "allwinner,sun8i-v3s-csi";
|
||||
reg = <0x01cb4000 0x3000>;
|
||||
@@ -604,16 +615,5 @@
|
||||
resets = <&ccu RST_BUS_CSI>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@1c81000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x01c81000 0x1000>,
|
||||
<0x01c82000 0x2000>,
|
||||
<0x01c84000 0x2000>,
|
||||
<0x01c86000 0x2000>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -183,8 +183,8 @@
|
||||
};
|
||||
conf_ata {
|
||||
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
|
||||
"cdev1", "cdev2", "dap1", "dtb", "gma",
|
||||
"gmb", "gmc", "gmd", "gme", "gpu7",
|
||||
"cdev1", "cdev2", "dap1", "dtb", "dtf",
|
||||
"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
|
||||
"gpv", "i2cp", "irrx", "irtx", "pta",
|
||||
"rm", "slxa", "slxk", "spia", "spib",
|
||||
"uac";
|
||||
@@ -203,7 +203,7 @@
|
||||
};
|
||||
conf_crtp {
|
||||
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
|
||||
"dtc", "dte", "dtf", "gpu", "sdio1",
|
||||
"dtc", "dte", "gpu", "sdio1",
|
||||
"slxc", "slxd", "spdi", "spdo", "spig",
|
||||
"uda";
|
||||
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
||||
|
||||
@@ -188,6 +188,7 @@ CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_MEDIA_SUPPORT=y
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_MEDIA_PLATFORM_SUPPORT=y
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_VIDEO_ASPEED=m
|
||||
CONFIG_VIDEO_ATMEL_ISI=m
|
||||
@@ -195,6 +196,7 @@ CONFIG_DRM=y
|
||||
CONFIG_DRM_ATMEL_HLCDC=m
|
||||
CONFIG_DRM_PANEL_SIMPLE=y
|
||||
CONFIG_DRM_ASPEED_GFX=m
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_IMX=y
|
||||
CONFIG_FB_ATMEL=y
|
||||
CONFIG_BACKLIGHT_ATMEL_LCDC=y
|
||||
|
||||
@@ -102,6 +102,8 @@ config CRYPTO_AES_ARM_BS
|
||||
depends on KERNEL_MODE_NEON
|
||||
select CRYPTO_SKCIPHER
|
||||
select CRYPTO_LIB_AES
|
||||
select CRYPTO_AES
|
||||
select CRYPTO_CBC
|
||||
select CRYPTO_SIMD
|
||||
help
|
||||
Use a faster and more secure NEON based implementation of AES in CBC,
|
||||
|
||||
@@ -22,10 +22,7 @@
|
||||
* mcount can be thought of as a function called in the middle of a subroutine
|
||||
* call. As such, it needs to be transparent for both the caller and the
|
||||
* callee: the original lr needs to be restored when leaving mcount, and no
|
||||
* registers should be clobbered. (In the __gnu_mcount_nc implementation, we
|
||||
* clobber the ip register. This is OK because the ARM calling convention
|
||||
* allows it to be clobbered in subroutines and doesn't use it to hold
|
||||
* parameters.)
|
||||
* registers should be clobbered.
|
||||
*
|
||||
* When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
|
||||
* instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
|
||||
@@ -70,24 +67,23 @@
|
||||
|
||||
.macro __ftrace_regs_caller
|
||||
|
||||
sub sp, sp, #8 @ space for PC and CPSR OLD_R0,
|
||||
str lr, [sp, #-8]! @ store LR as PC and make space for CPSR/OLD_R0,
|
||||
@ OLD_R0 will overwrite previous LR
|
||||
|
||||
add ip, sp, #12 @ move in IP the value of SP as it was
|
||||
@ before the push {lr} of the mcount mechanism
|
||||
|
||||
str lr, [sp, #0] @ store LR instead of PC
|
||||
|
||||
ldr lr, [sp, #8] @ get previous LR
|
||||
|
||||
str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
|
||||
|
||||
stmdb sp!, {ip, lr}
|
||||
stmdb sp!, {r0-r11, lr}
|
||||
str lr, [sp, #-4]! @ store previous LR as LR
|
||||
|
||||
add lr, sp, #16 @ move in LR the value of SP as it was
|
||||
@ before the push {lr} of the mcount mechanism
|
||||
|
||||
push {r0-r11, ip, lr}
|
||||
|
||||
@ stack content at this point:
|
||||
@ 0 4 48 52 56 60 64 68 72
|
||||
@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
|
||||
@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
|
||||
|
||||
mov r3, sp @ struct pt_regs*
|
||||
|
||||
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
|
||||
#endif
|
||||
|
||||
@ pop saved regs
|
||||
ldmia sp!, {r0-r12} @ restore r0 through r12
|
||||
ldr ip, [sp, #8] @ restore PC
|
||||
ldr lr, [sp, #4] @ restore LR
|
||||
ldr sp, [sp, #0] @ restore SP
|
||||
mov pc, ip @ return
|
||||
pop {r0-r11, ip, lr} @ restore r0 through r12
|
||||
ldr lr, [sp], #4 @ restore LR
|
||||
ldr pc, [sp], #12
|
||||
.endm
|
||||
|
||||
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
|
||||
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
|
||||
bl prepare_ftrace_return
|
||||
|
||||
@ pop registers saved in ftrace_regs_caller
|
||||
ldmia sp!, {r0-r12} @ restore r0 through r12
|
||||
ldr ip, [sp, #8] @ restore PC
|
||||
ldr lr, [sp, #4] @ restore LR
|
||||
ldr sp, [sp, #0] @ restore SP
|
||||
mov pc, ip @ return
|
||||
pop {r0-r11, ip, lr} @ restore r0 through r12
|
||||
ldr lr, [sp], #4 @ restore LR
|
||||
ldr pc, [sp], #12
|
||||
|
||||
.endm
|
||||
#endif
|
||||
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
|
||||
.endm
|
||||
|
||||
.macro mcount_exit
|
||||
ldmia sp!, {r0-r3, ip, lr}
|
||||
ret ip
|
||||
ldmia sp!, {r0-r3}
|
||||
ldr lr, [sp, #4]
|
||||
ldr pc, [sp], #8
|
||||
.endm
|
||||
|
||||
ENTRY(__gnu_mcount_nc)
|
||||
UNWIND(.fnstart)
|
||||
#ifdef CONFIG_DYNAMIC_FTRACE
|
||||
mov ip, lr
|
||||
ldmia sp!, {lr}
|
||||
ret ip
|
||||
push {lr}
|
||||
ldr lr, [sp, #4]
|
||||
ldr pc, [sp], #8
|
||||
#else
|
||||
__mcount
|
||||
#endif
|
||||
|
||||
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
|
||||
destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
|
||||
|
||||
/* Check access in reasonable access range for both SWP and SWPB */
|
||||
if (!access_ok((address & ~3), 4)) {
|
||||
if (!access_ok((void __user *)(address & ~3), 4)) {
|
||||
pr_debug("SWP{B} emulation: access to %p not allowed!\n",
|
||||
(void *)address);
|
||||
res = -EFAULT;
|
||||
|
||||
@@ -575,7 +575,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
|
||||
if (end < start || flags)
|
||||
return -EINVAL;
|
||||
|
||||
if (!access_ok(start, end - start))
|
||||
if (!access_ok((void __user *)start, end - start))
|
||||
return -EFAULT;
|
||||
|
||||
return __do_cache_op(start, end);
|
||||
|
||||
@@ -20,7 +20,7 @@
|
||||
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
|
||||
cmp \irqstat, #0
|
||||
clzne \irqnr, \irqstat
|
||||
rsbne \irqnr, \irqnr, #31
|
||||
rsbne \irqnr, \irqnr, #32
|
||||
.endm
|
||||
|
||||
.macro arch_ret_to_user, tmp1, tmp2
|
||||
|
||||
@@ -9,6 +9,6 @@
|
||||
#ifndef __IRQS_H
|
||||
#define __IRQS_H
|
||||
|
||||
#define NR_IRQS 32
|
||||
#define NR_IRQS 33
|
||||
|
||||
#endif
|
||||
|
||||
@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
|
||||
static void
|
||||
iop32x_irq_mask(struct irq_data *d)
|
||||
{
|
||||
iop32x_mask &= ~(1 << d->irq);
|
||||
iop32x_mask &= ~(1 << (d->irq - 1));
|
||||
intctl_write(iop32x_mask);
|
||||
}
|
||||
|
||||
static void
|
||||
iop32x_irq_unmask(struct irq_data *d)
|
||||
{
|
||||
iop32x_mask |= 1 << d->irq;
|
||||
iop32x_mask |= 1 << (d->irq - 1);
|
||||
intctl_write(iop32x_mask);
|
||||
}
|
||||
|
||||
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
|
||||
machine_is_em7210())
|
||||
*IOP3XX_PCIIRSR = 0x0f;
|
||||
|
||||
for (i = 0; i < NR_IRQS; i++) {
|
||||
for (i = 1; i < NR_IRQS; i++) {
|
||||
irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
|
||||
irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
|
||||
}
|
||||
|
||||
@@ -7,36 +7,40 @@
|
||||
#ifndef __IOP32X_IRQS_H
|
||||
#define __IOP32X_IRQS_H
|
||||
|
||||
/* Interrupts in Linux start at 1, hardware starts at 0 */
|
||||
|
||||
#define IOP_IRQ(x) ((x) + 1)
|
||||
|
||||
/*
|
||||
* IOP80321 chipset interrupts
|
||||
*/
|
||||
#define IRQ_IOP32X_DMA0_EOT 0
|
||||
#define IRQ_IOP32X_DMA0_EOC 1
|
||||
#define IRQ_IOP32X_DMA1_EOT 2
|
||||
#define IRQ_IOP32X_DMA1_EOC 3
|
||||
#define IRQ_IOP32X_AA_EOT 6
|
||||
#define IRQ_IOP32X_AA_EOC 7
|
||||
#define IRQ_IOP32X_CORE_PMON 8
|
||||
#define IRQ_IOP32X_TIMER0 9
|
||||
#define IRQ_IOP32X_TIMER1 10
|
||||
#define IRQ_IOP32X_I2C_0 11
|
||||
#define IRQ_IOP32X_I2C_1 12
|
||||
#define IRQ_IOP32X_MESSAGING 13
|
||||
#define IRQ_IOP32X_ATU_BIST 14
|
||||
#define IRQ_IOP32X_PERFMON 15
|
||||
#define IRQ_IOP32X_CORE_PMU 16
|
||||
#define IRQ_IOP32X_BIU_ERR 17
|
||||
#define IRQ_IOP32X_ATU_ERR 18
|
||||
#define IRQ_IOP32X_MCU_ERR 19
|
||||
#define IRQ_IOP32X_DMA0_ERR 20
|
||||
#define IRQ_IOP32X_DMA1_ERR 21
|
||||
#define IRQ_IOP32X_AA_ERR 23
|
||||
#define IRQ_IOP32X_MSG_ERR 24
|
||||
#define IRQ_IOP32X_SSP 25
|
||||
#define IRQ_IOP32X_XINT0 27
|
||||
#define IRQ_IOP32X_XINT1 28
|
||||
#define IRQ_IOP32X_XINT2 29
|
||||
#define IRQ_IOP32X_XINT3 30
|
||||
#define IRQ_IOP32X_HPI 31
|
||||
#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0)
|
||||
#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1)
|
||||
#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2)
|
||||
#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3)
|
||||
#define IRQ_IOP32X_AA_EOT IOP_IRQ(6)
|
||||
#define IRQ_IOP32X_AA_EOC IOP_IRQ(7)
|
||||
#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8)
|
||||
#define IRQ_IOP32X_TIMER0 IOP_IRQ(9)
|
||||
#define IRQ_IOP32X_TIMER1 IOP_IRQ(10)
|
||||
#define IRQ_IOP32X_I2C_0 IOP_IRQ(11)
|
||||
#define IRQ_IOP32X_I2C_1 IOP_IRQ(12)
|
||||
#define IRQ_IOP32X_MESSAGING IOP_IRQ(13)
|
||||
#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14)
|
||||
#define IRQ_IOP32X_PERFMON IOP_IRQ(15)
|
||||
#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16)
|
||||
#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17)
|
||||
#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18)
|
||||
#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19)
|
||||
#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20)
|
||||
#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21)
|
||||
#define IRQ_IOP32X_AA_ERR IOP_IRQ(23)
|
||||
#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24)
|
||||
#define IRQ_IOP32X_SSP IOP_IRQ(25)
|
||||
#define IRQ_IOP32X_XINT0 IOP_IRQ(27)
|
||||
#define IRQ_IOP32X_XINT1 IOP_IRQ(28)
|
||||
#define IRQ_IOP32X_XINT2 IOP_IRQ(29)
|
||||
#define IRQ_IOP32X_XINT3 IOP_IRQ(30)
|
||||
#define IRQ_IOP32X_HPI IOP_IRQ(31)
|
||||
|
||||
#endif
|
||||
|
||||
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
|
||||
if (!info)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, info);
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (res == NULL) {
|
||||
dev_err(&pdev->dev, "no memory resource defined\n");
|
||||
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
|
||||
list_add(&info->node, &sram_bank_list);
|
||||
mutex_unlock(&sram_lock);
|
||||
|
||||
platform_set_drvdata(pdev, info);
|
||||
|
||||
dev_info(&pdev->dev, "initialized\n");
|
||||
return 0;
|
||||
|
||||
@@ -127,9 +127,8 @@ static int sram_remove(struct platform_device *pdev)
|
||||
struct sram_bank_info *info;
|
||||
|
||||
info = platform_get_drvdata(pdev);
|
||||
if (info == NULL)
|
||||
return -ENODEV;
|
||||
|
||||
if (info->sram_size) {
|
||||
mutex_lock(&sram_lock);
|
||||
list_del(&info->node);
|
||||
mutex_unlock(&sram_lock);
|
||||
@@ -137,7 +136,10 @@ static int sram_remove(struct platform_device *pdev)
|
||||
gen_pool_destroy(info->gpool);
|
||||
iounmap(info->sram_virt);
|
||||
kfree(info->pool_name);
|
||||
}
|
||||
|
||||
kfree(info);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
@@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7
|
||||
depends on ARCH_MULTI_V7
|
||||
select ARM_GIC
|
||||
select ARM_HEAVY_MB
|
||||
select HAVE_ARM_ARCH_TIMER
|
||||
select MST_IRQ
|
||||
select MSTAR_MSC313_MPLL
|
||||
help
|
||||
|
||||
@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *options)
|
||||
unsigned long set;
|
||||
|
||||
if (options == NULL || options[0] == '\0')
|
||||
return 0;
|
||||
return 1;
|
||||
|
||||
if (kstrtoul(options, 10, &set)) {
|
||||
printk(KERN_ERR "failed to parse mtdset=%s\n", options);
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
switch (set) {
|
||||
@@ -255,7 +255,7 @@ static int __init jive_mtdset(char *options)
|
||||
"using default.", set);
|
||||
}
|
||||
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* parse the mtdset= option given to the kernel command line */
|
||||
|
||||
@@ -273,9 +273,9 @@
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00 0x00 0xff800000 0x3000>;
|
||||
|
||||
timer: timer@400 {
|
||||
compatible = "brcm,bcm6328-timer", "syscon";
|
||||
reg = <0x400 0x3c>;
|
||||
twd: timer-mfd@400 {
|
||||
compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
|
||||
reg = <0x400 0x4c>;
|
||||
};
|
||||
|
||||
gpio0: gpio-controller@500 {
|
||||
@@ -330,7 +330,7 @@
|
||||
|
||||
reboot {
|
||||
compatible = "syscon-reboot";
|
||||
regmap = <&timer>;
|
||||
regmap = <&twd>;
|
||||
offset = <0x34>;
|
||||
mask = <1>;
|
||||
};
|
||||
|
||||
@@ -111,8 +111,8 @@
|
||||
compatible = "silabs,si3226x";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <5000000>;
|
||||
spi-cpha = <1>;
|
||||
spi-cpol = <1>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
pl022,hierarchy = <0>;
|
||||
pl022,interface = <0>;
|
||||
pl022,slave-tx-disable = <0>;
|
||||
@@ -135,8 +135,8 @@
|
||||
at25,byte-len = <0x8000>;
|
||||
at25,addr-mode = <2>;
|
||||
at25,page-size = <64>;
|
||||
spi-cpha = <1>;
|
||||
spi-cpol = <1>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
pl022,hierarchy = <0>;
|
||||
pl022,interface = <0>;
|
||||
pl022,slave-tx-disable = <0>;
|
||||
|
||||
@@ -687,7 +687,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
sata: ahci@663f2000 {
|
||||
sata: sata@663f2000 {
|
||||
compatible = "brcm,iproc-ahci", "generic-ahci";
|
||||
reg = <0x663f2000 0x1000>;
|
||||
dma-coherent;
|
||||
|
||||
@@ -536,9 +536,9 @@
|
||||
clock-names = "i2c";
|
||||
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
||||
QORIQ_CLK_PLL_DIV(1)>;
|
||||
dmas = <&edma0 1 39>,
|
||||
<&edma0 1 38>;
|
||||
dma-names = "tx", "rx";
|
||||
dmas = <&edma0 1 38>,
|
||||
<&edma0 1 39>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
@@ -499,9 +499,9 @@
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
||||
QORIQ_CLK_PLL_DIV(2)>;
|
||||
dmas = <&edma0 1 39>,
|
||||
<&edma0 1 38>;
|
||||
dma-names = "tx", "rx";
|
||||
dmas = <&edma0 1 38>,
|
||||
<&edma0 1 39>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
@@ -3608,10 +3608,10 @@
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <9600000>;
|
||||
clock-output-names = "mclk";
|
||||
qcom,micbias1-millivolt = <1800>;
|
||||
qcom,micbias2-millivolt = <1800>;
|
||||
qcom,micbias3-millivolt = <1800>;
|
||||
qcom,micbias4-millivolt = <1800>;
|
||||
qcom,micbias1-microvolt = <1800000>;
|
||||
qcom,micbias2-microvolt = <1800000>;
|
||||
qcom,micbias3-microvolt = <1800000>;
|
||||
qcom,micbias4-microvolt = <1800000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
@@ -3434,9 +3434,9 @@
|
||||
qcom,tcs-offset = <0xd00>;
|
||||
qcom,drv-id = <2>;
|
||||
qcom,tcs-config = <ACTIVE_TCS 2>,
|
||||
<SLEEP_TCS 1>,
|
||||
<WAKE_TCS 1>,
|
||||
<CONTROL_TCS 0>;
|
||||
<SLEEP_TCS 3>,
|
||||
<WAKE_TCS 3>,
|
||||
<CONTROL_TCS 1>;
|
||||
|
||||
rpmhcc: clock-controller {
|
||||
compatible = "qcom,sm8150-rpmh-clk";
|
||||
|
||||
@@ -1434,8 +1434,8 @@
|
||||
phys = <&pcie0_lane>;
|
||||
phy-names = "pciephy";
|
||||
|
||||
perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
|
||||
enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
|
||||
perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_default_state>;
|
||||
@@ -1495,7 +1495,7 @@
|
||||
ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
|
||||
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
|
||||
|
||||
interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
@@ -1538,8 +1538,8 @@
|
||||
phys = <&pcie1_lane>;
|
||||
phy-names = "pciephy";
|
||||
|
||||
perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
|
||||
enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
|
||||
perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie1_default_state>;
|
||||
@@ -1601,7 +1601,7 @@
|
||||
ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
|
||||
<0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
|
||||
|
||||
interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
@@ -1644,8 +1644,8 @@
|
||||
phys = <&pcie2_lane>;
|
||||
phy-names = "pciephy";
|
||||
|
||||
perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
|
||||
enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
||||
perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_default_state>;
|
||||
|
||||
@@ -979,7 +979,7 @@
|
||||
qcom,tcs-offset = <0xd00>;
|
||||
qcom,drv-id = <2>;
|
||||
qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
|
||||
<WAKE_TCS 3>, <CONTROL_TCS 1>;
|
||||
<WAKE_TCS 3>, <CONTROL_TCS 0>;
|
||||
|
||||
rpmhcc: clock-controller {
|
||||
compatible = "qcom,sm8350-rpmh-clk";
|
||||
|
||||
@@ -770,8 +770,8 @@
|
||||
sd-uhs-sdr104;
|
||||
|
||||
/* Power supply */
|
||||
vqmmc-supply = &vcc1v8_s3; /* IO line */
|
||||
vmmc-supply = &vcc_sdio; /* card's power */
|
||||
vqmmc-supply = <&vcc1v8_s3>; /* IO line */
|
||||
vmmc-supply = <&vcc_sdio>; /* card's power */
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
@@ -59,7 +59,10 @@
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01840000 0x00 0xC0000>; /* GICR */
|
||||
<0x00 0x01840000 0x00 0xC0000>, /* GICR */
|
||||
<0x01 0x00000000 0x00 0x2000>, /* GICC */
|
||||
<0x01 0x00010000 0x00 0x1000>, /* GICH */
|
||||
<0x01 0x00020000 0x00 0x2000>; /* GICV */
|
||||
/*
|
||||
* vcpumntirq:
|
||||
* virtual CPU interface maintenance interrupt
|
||||
|
||||
@@ -85,6 +85,7 @@
|
||||
<0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
|
||||
<0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
|
||||
<0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
|
||||
<0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
|
||||
<0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
|
||||
|
||||
|
||||
@@ -35,7 +35,10 @@
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01880000 0x00 0x90000>; /* GICR */
|
||||
<0x00 0x01880000 0x00 0x90000>, /* GICR */
|
||||
<0x00 0x6f000000 0x00 0x2000>, /* GICC */
|
||||
<0x00 0x6f010000 0x00 0x1000>, /* GICH */
|
||||
<0x00 0x6f020000 0x00 0x2000>; /* GICV */
|
||||
/*
|
||||
* vcpumntirq:
|
||||
* virtual CPU interface maintenance interrupt
|
||||
|
||||
@@ -84,6 +84,7 @@
|
||||
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
|
||||
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
|
||||
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
|
||||
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
|
||||
<0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
|
||||
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
|
||||
|
||||
@@ -54,7 +54,10 @@
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01900000 0x00 0x100000>; /* GICR */
|
||||
<0x00 0x01900000 0x00 0x100000>, /* GICR */
|
||||
<0x00 0x6f000000 0x00 0x2000>, /* GICC */
|
||||
<0x00 0x6f010000 0x00 0x1000>, /* GICH */
|
||||
<0x00 0x6f020000 0x00 0x2000>; /* GICV */
|
||||
|
||||
/* vcpumntirq: virtual CPU interface maintenance interrupt */
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -127,6 +127,7 @@
|
||||
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
|
||||
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
|
||||
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
|
||||
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
|
||||
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
|
||||
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
|
||||
<0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
|
||||
|
||||
@@ -76,7 +76,10 @@
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01900000 0x00 0x100000>; /* GICR */
|
||||
<0x00 0x01900000 0x00 0x100000>, /* GICR */
|
||||
<0x00 0x6f000000 0x00 0x2000>, /* GICC */
|
||||
<0x00 0x6f010000 0x00 0x1000>, /* GICH */
|
||||
<0x00 0x6f020000 0x00 0x2000>; /* GICV */
|
||||
|
||||
/* vcpumntirq: virtual CPU interface maintenance interrupt */
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -136,6 +136,7 @@
|
||||
<0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
|
||||
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
|
||||
<0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
|
||||
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
|
||||
<0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
|
||||
<0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
|
||||
<0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
|
||||
|
||||
@@ -921,7 +921,7 @@ CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_BCM2835=y
|
||||
CONFIG_DMA_SUN6I=m
|
||||
CONFIG_FSL_EDMA=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
CONFIG_IMX_SDMA=m
|
||||
CONFIG_K3_DMA=y
|
||||
CONFIG_MV_XOR=y
|
||||
CONFIG_MV_XOR_V2=y
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
SECTIONS {
|
||||
#ifdef CONFIG_ARM64_MODULE_PLTS
|
||||
.plt 0 (NOLOAD) : { BYTE(0) }
|
||||
.init.plt 0 (NOLOAD) : { BYTE(0) }
|
||||
.text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) }
|
||||
.plt 0 : { BYTE(0) }
|
||||
.init.plt 0 : { BYTE(0) }
|
||||
.text.ftrace_trampoline 0 : { BYTE(0) }
|
||||
|
||||
#ifdef CONFIG_CRYPTO_FIPS140
|
||||
/*
|
||||
|
||||
@@ -67,7 +67,8 @@ struct bp_hardening_data {
|
||||
|
||||
DECLARE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
|
||||
|
||||
static inline void arm64_apply_bp_hardening(void)
|
||||
/* Called during entry so must be __always_inline */
|
||||
static __always_inline void arm64_apply_bp_hardening(void)
|
||||
{
|
||||
struct bp_hardening_data *d;
|
||||
|
||||
|
||||
@@ -233,17 +233,20 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn)
|
||||
__this_cpu_write(bp_hardening_data.slot, HYP_VECTOR_SPECTRE_DIRECT);
|
||||
}
|
||||
|
||||
static void call_smc_arch_workaround_1(void)
|
||||
/* Called during entry so must be noinstr */
|
||||
static noinstr void call_smc_arch_workaround_1(void)
|
||||
{
|
||||
arm_smccc_1_1_smc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
|
||||
}
|
||||
|
||||
static void call_hvc_arch_workaround_1(void)
|
||||
/* Called during entry so must be noinstr */
|
||||
static noinstr void call_hvc_arch_workaround_1(void)
|
||||
{
|
||||
arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
|
||||
}
|
||||
|
||||
static void qcom_link_stack_sanitisation(void)
|
||||
/* Called during entry so must be noinstr */
|
||||
static noinstr void qcom_link_stack_sanitisation(void)
|
||||
{
|
||||
u64 tmp;
|
||||
|
||||
|
||||
@@ -577,10 +577,12 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
|
||||
{
|
||||
int err;
|
||||
|
||||
if (system_supports_fpsimd()) {
|
||||
err = sigframe_alloc(user, &user->fpsimd_offset,
|
||||
sizeof(struct fpsimd_context));
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
|
||||
/* fault information, if valid */
|
||||
if (add_all || current->thread.fault_code) {
|
||||
|
||||
@@ -61,8 +61,34 @@ EXPORT_SYMBOL(memstart_addr);
|
||||
* unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
|
||||
* In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
|
||||
* otherwise it is empty.
|
||||
*
|
||||
* Memory reservation for crash kernel either done early or deferred
|
||||
* depending on DMA memory zones configs (ZONE_DMA) --
|
||||
*
|
||||
* In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
|
||||
* here instead of max_zone_phys(). This lets early reservation of
|
||||
* crash kernel memory which has a dependency on arm64_dma_phys_limit.
|
||||
* Reserving memory early for crash kernel allows linear creation of block
|
||||
* mappings (greater than page-granularity) for all the memory bank rangs.
|
||||
* In this scheme a comparatively quicker boot is observed.
|
||||
*
|
||||
* If ZONE_DMA configs are defined, crash kernel memory reservation
|
||||
* is delayed until DMA zone memory range size initilazation performed in
|
||||
* zone_sizes_init(). The defer is necessary to steer clear of DMA zone
|
||||
* memory range to avoid overlap allocation. So crash kernel memory boundaries
|
||||
* are not known when mapping all bank memory ranges, which otherwise means
|
||||
* not possible to exclude crash kernel range from creating block mappings
|
||||
* so page-granularity mappings are created for the entire memory range.
|
||||
* Hence a slightly slower boot is observed.
|
||||
*
|
||||
* Note: Page-granularity mapppings are necessary for crash kernel memory
|
||||
* range for shrinking its size via /sys/kernel/kexec_crash_size interface.
|
||||
*/
|
||||
phys_addr_t arm64_dma_phys_limit __ro_after_init;
|
||||
#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
|
||||
phys_addr_t __ro_after_init arm64_dma_phys_limit;
|
||||
#else
|
||||
phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Provide a run-time mean of disabling ZONE_DMA32 if it is enabled via
|
||||
@@ -159,8 +185,6 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
|
||||
if (!arm64_dma_phys_limit)
|
||||
arm64_dma_phys_limit = dma32_phys_limit;
|
||||
#endif
|
||||
if (!arm64_dma_phys_limit)
|
||||
arm64_dma_phys_limit = PHYS_MASK + 1;
|
||||
max_zone_pfns[ZONE_NORMAL] = max;
|
||||
|
||||
free_area_init(max_zone_pfns);
|
||||
@@ -370,6 +394,9 @@ void __init arm64_memblock_init(void)
|
||||
|
||||
early_init_fdt_scan_reserved_mem();
|
||||
|
||||
if (!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32))
|
||||
reserve_crashkernel();
|
||||
|
||||
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
|
||||
}
|
||||
|
||||
@@ -416,6 +443,7 @@ void __init bootmem_init(void)
|
||||
* request_standard_resources() depends on crashkernel's memory being
|
||||
* reserved, so do it here.
|
||||
*/
|
||||
if (IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32))
|
||||
reserve_crashkernel();
|
||||
|
||||
memblock_dump_all();
|
||||
|
||||
@@ -63,6 +63,7 @@ static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
|
||||
static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
|
||||
|
||||
static DEFINE_SPINLOCK(swapper_pgdir_lock);
|
||||
static DEFINE_MUTEX(fixmap_lock);
|
||||
|
||||
void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
|
||||
{
|
||||
@@ -329,6 +330,12 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
|
||||
}
|
||||
BUG_ON(p4d_bad(p4d));
|
||||
|
||||
/*
|
||||
* No need for locking during early boot. And it doesn't work as
|
||||
* expected with KASLR enabled.
|
||||
*/
|
||||
if (system_state != SYSTEM_BOOTING)
|
||||
mutex_lock(&fixmap_lock);
|
||||
pudp = pud_set_fixmap_offset(p4dp, addr);
|
||||
do {
|
||||
pud_t old_pud = READ_ONCE(*pudp);
|
||||
@@ -359,6 +366,8 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
|
||||
} while (pudp++, addr = next, addr != end);
|
||||
|
||||
pud_clear_fixmap();
|
||||
if (system_state != SYSTEM_BOOTING)
|
||||
mutex_unlock(&fixmap_lock);
|
||||
}
|
||||
|
||||
static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
|
||||
@@ -517,7 +526,7 @@ static void __init map_mem(pgd_t *pgdp)
|
||||
*/
|
||||
BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end));
|
||||
|
||||
if (can_set_direct_map() || crash_mem_map || IS_ENABLED(CONFIG_KFENCE))
|
||||
if (can_set_direct_map() || IS_ENABLED(CONFIG_KFENCE))
|
||||
flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
|
||||
|
||||
/*
|
||||
@@ -528,6 +537,17 @@ static void __init map_mem(pgd_t *pgdp)
|
||||
*/
|
||||
memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
|
||||
|
||||
#ifdef CONFIG_KEXEC_CORE
|
||||
if (crash_mem_map) {
|
||||
if (IS_ENABLED(CONFIG_ZONE_DMA) ||
|
||||
IS_ENABLED(CONFIG_ZONE_DMA32))
|
||||
flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
|
||||
else if (crashk_res.end)
|
||||
memblock_mark_nomap(crashk_res.start,
|
||||
resource_size(&crashk_res));
|
||||
}
|
||||
#endif
|
||||
|
||||
/* map all the memory banks */
|
||||
for_each_mem_range(i, &start, &end) {
|
||||
if (start >= end)
|
||||
@@ -554,6 +574,25 @@ static void __init map_mem(pgd_t *pgdp)
|
||||
__map_memblock(pgdp, kernel_start, kernel_end,
|
||||
PAGE_KERNEL, NO_CONT_MAPPINGS);
|
||||
memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
|
||||
|
||||
/*
|
||||
* Use page-level mappings here so that we can shrink the region
|
||||
* in page granularity and put back unused memory to buddy system
|
||||
* through /sys/kernel/kexec_crash_size interface.
|
||||
*/
|
||||
#ifdef CONFIG_KEXEC_CORE
|
||||
if (crash_mem_map &&
|
||||
!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32)) {
|
||||
if (crashk_res.end) {
|
||||
__map_memblock(pgdp, crashk_res.start,
|
||||
crashk_res.end + 1,
|
||||
PAGE_KERNEL,
|
||||
NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
|
||||
memblock_clear_nomap(crashk_res.start,
|
||||
resource_size(&crashk_res));
|
||||
}
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void mark_rodata_ro(void)
|
||||
|
||||
@@ -1042,15 +1042,18 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
|
||||
goto out_off;
|
||||
}
|
||||
|
||||
/* 1. Initial fake pass to compute ctx->idx. */
|
||||
|
||||
/* Fake pass to fill in ctx->offset. */
|
||||
if (build_body(&ctx, extra_pass)) {
|
||||
/*
|
||||
* 1. Initial fake pass to compute ctx->idx and ctx->offset.
|
||||
*
|
||||
* BPF line info needs ctx->offset[i] to be the offset of
|
||||
* instruction[i] in jited image, so build prologue first.
|
||||
*/
|
||||
if (build_prologue(&ctx, was_classic)) {
|
||||
prog = orig_prog;
|
||||
goto out_off;
|
||||
}
|
||||
|
||||
if (build_prologue(&ctx, was_classic)) {
|
||||
if (build_body(&ctx, extra_pass)) {
|
||||
prog = orig_prog;
|
||||
goto out_off;
|
||||
}
|
||||
@@ -1123,6 +1126,11 @@ skip_init_ctx:
|
||||
prog->jited_len = prog_size;
|
||||
|
||||
if (!prog->is_func || extra_pass) {
|
||||
int i;
|
||||
|
||||
/* offset[prog->len] is the size of program */
|
||||
for (i = 0; i <= prog->len; i++)
|
||||
ctx.offset[i] *= AARCH64_INSN_SIZE;
|
||||
bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
|
||||
out_off:
|
||||
kfree(ctx.offset);
|
||||
|
||||
@@ -49,7 +49,7 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
|
||||
{
|
||||
struct stackframe buftail;
|
||||
unsigned long lr = 0;
|
||||
unsigned long *user_frame_tail = (unsigned long *)fp;
|
||||
unsigned long __user *user_frame_tail = (unsigned long __user *)fp;
|
||||
|
||||
/* Check accessibility of one struct frame_tail beyond */
|
||||
if (!access_ok(user_frame_tail, sizeof(buftail)))
|
||||
|
||||
@@ -136,7 +136,7 @@ static inline void __user *get_sigframe(struct ksignal *ksig,
|
||||
static int
|
||||
setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
|
||||
{
|
||||
struct rt_sigframe *frame;
|
||||
struct rt_sigframe __user *frame;
|
||||
int err = 0;
|
||||
|
||||
frame = get_sigframe(ksig, regs, sizeof(*frame));
|
||||
|
||||
@@ -480,7 +480,7 @@ static struct platform_device mcf_i2c5 = {
|
||||
#endif /* MCFI2C_BASE5 */
|
||||
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
||||
|
||||
#if IS_ENABLED(CONFIG_MCF_EDMA)
|
||||
#ifdef MCFEDMA_BASE
|
||||
|
||||
static const struct dma_slave_map mcf_edma_map[] = {
|
||||
{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
|
||||
@@ -552,7 +552,7 @@ static struct platform_device mcf_edma = {
|
||||
.platform_data = &mcf_edma_data,
|
||||
}
|
||||
};
|
||||
#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
|
||||
#endif /* MCFEDMA_BASE */
|
||||
|
||||
#ifdef MCFSDHC_BASE
|
||||
static struct mcf_esdhc_platform_data mcf_esdhc_data = {
|
||||
@@ -651,7 +651,7 @@ static struct platform_device *mcf_devices[] __initdata = {
|
||||
&mcf_i2c5,
|
||||
#endif
|
||||
#endif
|
||||
#if IS_ENABLED(CONFIG_MCF_EDMA)
|
||||
#ifdef MCFEDMA_BASE
|
||||
&mcf_edma,
|
||||
#endif
|
||||
#ifdef MCFSDHC_BASE
|
||||
|
||||
@@ -130,27 +130,27 @@ extern long __user_bad(void);
|
||||
|
||||
#define __get_user(x, ptr) \
|
||||
({ \
|
||||
unsigned long __gu_val = 0; \
|
||||
long __gu_err; \
|
||||
switch (sizeof(*(ptr))) { \
|
||||
case 1: \
|
||||
__get_user_asm("lbu", (ptr), __gu_val, __gu_err); \
|
||||
__get_user_asm("lbu", (ptr), x, __gu_err); \
|
||||
break; \
|
||||
case 2: \
|
||||
__get_user_asm("lhu", (ptr), __gu_val, __gu_err); \
|
||||
__get_user_asm("lhu", (ptr), x, __gu_err); \
|
||||
break; \
|
||||
case 4: \
|
||||
__get_user_asm("lw", (ptr), __gu_val, __gu_err); \
|
||||
__get_user_asm("lw", (ptr), x, __gu_err); \
|
||||
break; \
|
||||
case 8: \
|
||||
__gu_err = __copy_from_user(&__gu_val, ptr, 8); \
|
||||
if (__gu_err) \
|
||||
__gu_err = -EFAULT; \
|
||||
case 8: { \
|
||||
__u64 __x = 0; \
|
||||
__gu_err = raw_copy_from_user(&__x, ptr, 8) ? \
|
||||
-EFAULT : 0; \
|
||||
(x) = (typeof(x))(typeof((x) - (x)))__x; \
|
||||
break; \
|
||||
} \
|
||||
default: \
|
||||
/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
|
||||
} \
|
||||
x = (__force __typeof__(*(ptr))) __gu_val; \
|
||||
__gu_err; \
|
||||
})
|
||||
|
||||
|
||||
@@ -131,7 +131,7 @@
|
||||
*/
|
||||
mfc0 t0,CP0_CAUSE # get pending interrupts
|
||||
mfc0 t1,CP0_STATUS
|
||||
#ifdef CONFIG_32BIT
|
||||
#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
|
||||
lw t2,cpu_fpu_mask
|
||||
#endif
|
||||
andi t0,ST0_IM # CAUSE.CE may be non-zero!
|
||||
@@ -139,7 +139,7 @@
|
||||
|
||||
beqz t0,spurious
|
||||
|
||||
#ifdef CONFIG_32BIT
|
||||
#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
|
||||
and t2,t0
|
||||
bnez t2,fpu # handle FPU immediately
|
||||
#endif
|
||||
@@ -280,7 +280,7 @@ handle_it:
|
||||
j dec_irq_dispatch
|
||||
nop
|
||||
|
||||
#ifdef CONFIG_32BIT
|
||||
#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
|
||||
fpu:
|
||||
lw t0,fpu_kstat_irq
|
||||
nop
|
||||
|
||||
@@ -6,4 +6,4 @@
|
||||
|
||||
lib-y += init.o memory.o cmdline.o identify.o console.o
|
||||
|
||||
lib-$(CONFIG_32BIT) += locore.o
|
||||
lib-$(CONFIG_CPU_R3000) += locore.o
|
||||
|
||||
@@ -746,7 +746,8 @@ void __init arch_init_irq(void)
|
||||
dec_interrupt[DEC_IRQ_HALT] = -1;
|
||||
|
||||
/* Register board interrupts: FPU and cascade. */
|
||||
if (dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
|
||||
if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT) &&
|
||||
dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
|
||||
struct irq_desc *desc_fpu;
|
||||
int irq_fpu;
|
||||
|
||||
|
||||
@@ -43,16 +43,11 @@
|
||||
*/
|
||||
#define REX_PROM_MAGIC 0x30464354
|
||||
|
||||
#ifdef CONFIG_64BIT
|
||||
|
||||
#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
|
||||
|
||||
#else /* !CONFIG_64BIT */
|
||||
|
||||
#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC)
|
||||
|
||||
#endif /* !CONFIG_64BIT */
|
||||
|
||||
/* KN04 and KN05 are REX PROMs, so only do the check for R3k systems. */
|
||||
static inline bool prom_is_rex(u32 magic)
|
||||
{
|
||||
return !IS_ENABLED(CONFIG_CPU_R3000) || magic == REX_PROM_MAGIC;
|
||||
}
|
||||
|
||||
/*
|
||||
* 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
|
||||
|
||||
@@ -15,6 +15,7 @@
|
||||
|
||||
#define __HAVE_ARCH_PMD_ALLOC_ONE
|
||||
#define __HAVE_ARCH_PUD_ALLOC_ONE
|
||||
#define __HAVE_ARCH_PGD_FREE
|
||||
#include <asm-generic/pgalloc.h>
|
||||
|
||||
static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
|
||||
@@ -48,6 +49,11 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
|
||||
extern void pgd_init(unsigned long page);
|
||||
extern pgd_t *pgd_alloc(struct mm_struct *mm);
|
||||
|
||||
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
|
||||
{
|
||||
free_pages((unsigned long)pgd, PGD_ORDER);
|
||||
}
|
||||
|
||||
#define __pte_free_tlb(tlb,pte,address) \
|
||||
do { \
|
||||
pgtable_pte_page_dtor(pte); \
|
||||
|
||||
@@ -2167,16 +2167,14 @@ static void build_r4000_tlb_load_handler(void)
|
||||
uasm_i_tlbr(&p);
|
||||
|
||||
switch (current_cpu_type()) {
|
||||
default:
|
||||
if (cpu_has_mips_r2_exec_hazard) {
|
||||
uasm_i_ehb(&p);
|
||||
fallthrough;
|
||||
|
||||
case CPU_CAVIUM_OCTEON:
|
||||
case CPU_CAVIUM_OCTEON_PLUS:
|
||||
case CPU_CAVIUM_OCTEON2:
|
||||
break;
|
||||
}
|
||||
default:
|
||||
if (cpu_has_mips_r2_exec_hazard)
|
||||
uasm_i_ehb(&p);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Examine entrylo 0 or 1 based on ptr. */
|
||||
@@ -2243,15 +2241,14 @@ static void build_r4000_tlb_load_handler(void)
|
||||
uasm_i_tlbr(&p);
|
||||
|
||||
switch (current_cpu_type()) {
|
||||
default:
|
||||
if (cpu_has_mips_r2_exec_hazard) {
|
||||
uasm_i_ehb(&p);
|
||||
|
||||
case CPU_CAVIUM_OCTEON:
|
||||
case CPU_CAVIUM_OCTEON_PLUS:
|
||||
case CPU_CAVIUM_OCTEON2:
|
||||
break;
|
||||
}
|
||||
default:
|
||||
if (cpu_has_mips_r2_exec_hazard)
|
||||
uasm_i_ehb(&p);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Examine entrylo 0 or 1 based on ptr. */
|
||||
|
||||
@@ -301,11 +301,9 @@ static int __init plat_setup_devices(void)
|
||||
static int __init setup_kmac(char *s)
|
||||
{
|
||||
printk(KERN_INFO "korina mac = %s\n", s);
|
||||
if (!mac_pton(s, korina_dev0_data.mac)) {
|
||||
if (!mac_pton(s, korina_dev0_data.mac))
|
||||
printk(KERN_ERR "Invalid mac\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
__setup("kmac=", setup_kmac);
|
||||
|
||||
@@ -88,6 +88,7 @@ extern __must_check long strnlen_user(const char __user *s, long n);
|
||||
/* Optimized macros */
|
||||
#define __get_user_asm(val, insn, addr, err) \
|
||||
{ \
|
||||
unsigned long __gu_val; \
|
||||
__asm__ __volatile__( \
|
||||
" movi %0, %3\n" \
|
||||
"1: " insn " %1, 0(%2)\n" \
|
||||
@@ -96,14 +97,20 @@ extern __must_check long strnlen_user(const char __user *s, long n);
|
||||
" .section __ex_table,\"a\"\n" \
|
||||
" .word 1b, 2b\n" \
|
||||
" .previous" \
|
||||
: "=&r" (err), "=r" (val) \
|
||||
: "=&r" (err), "=r" (__gu_val) \
|
||||
: "r" (addr), "i" (-EFAULT)); \
|
||||
val = (__force __typeof__(*(addr)))__gu_val; \
|
||||
}
|
||||
|
||||
#define __get_user_unknown(val, size, ptr, err) do { \
|
||||
extern void __get_user_unknown(void);
|
||||
|
||||
#define __get_user_8(val, ptr, err) do { \
|
||||
u64 __val = 0; \
|
||||
err = 0; \
|
||||
if (__copy_from_user(&(val), ptr, size)) { \
|
||||
if (raw_copy_from_user(&(__val), ptr, sizeof(val))) { \
|
||||
err = -EFAULT; \
|
||||
} else { \
|
||||
val = (typeof(val))(typeof((val) - (val)))__val; \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
@@ -119,8 +126,11 @@ do { \
|
||||
case 4: \
|
||||
__get_user_asm(val, "ldw", ptr, err); \
|
||||
break; \
|
||||
case 8: \
|
||||
__get_user_8(val, ptr, err); \
|
||||
break; \
|
||||
default: \
|
||||
__get_user_unknown(val, size, ptr, err); \
|
||||
__get_user_unknown(); \
|
||||
break; \
|
||||
} \
|
||||
} while (0)
|
||||
@@ -129,9 +139,7 @@ do { \
|
||||
({ \
|
||||
long __gu_err = -EFAULT; \
|
||||
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
|
||||
unsigned long __gu_val = 0; \
|
||||
__get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
|
||||
(x) = (__force __typeof__(x))__gu_val; \
|
||||
__get_user_common(x, sizeof(*(ptr)), __gu_ptr, __gu_err); \
|
||||
__gu_err; \
|
||||
})
|
||||
|
||||
@@ -139,11 +147,9 @@ do { \
|
||||
({ \
|
||||
long __gu_err = -EFAULT; \
|
||||
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
|
||||
unsigned long __gu_val = 0; \
|
||||
if (access_ok( __gu_ptr, sizeof(*__gu_ptr))) \
|
||||
__get_user_common(__gu_val, sizeof(*__gu_ptr), \
|
||||
__get_user_common(x, sizeof(*__gu_ptr), \
|
||||
__gu_ptr, __gu_err); \
|
||||
(x) = (__force __typeof__(x))__gu_val; \
|
||||
__gu_err; \
|
||||
})
|
||||
|
||||
|
||||
@@ -36,10 +36,10 @@ struct rt_sigframe {
|
||||
|
||||
static inline int rt_restore_ucontext(struct pt_regs *regs,
|
||||
struct switch_stack *sw,
|
||||
struct ucontext *uc, int *pr2)
|
||||
struct ucontext __user *uc, int *pr2)
|
||||
{
|
||||
int temp;
|
||||
unsigned long *gregs = uc->uc_mcontext.gregs;
|
||||
unsigned long __user *gregs = uc->uc_mcontext.gregs;
|
||||
int err;
|
||||
|
||||
/* Always make any pending restarted system calls return -EINTR */
|
||||
@@ -102,10 +102,11 @@ asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
|
||||
{
|
||||
struct pt_regs *regs = (struct pt_regs *)(sw + 1);
|
||||
/* Verify, can we follow the stack back */
|
||||
struct rt_sigframe *frame = (struct rt_sigframe *) regs->sp;
|
||||
struct rt_sigframe __user *frame;
|
||||
sigset_t set;
|
||||
int rval;
|
||||
|
||||
frame = (struct rt_sigframe __user *) regs->sp;
|
||||
if (!access_ok(frame, sizeof(*frame)))
|
||||
goto badframe;
|
||||
|
||||
@@ -124,10 +125,10 @@ badframe:
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
|
||||
static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
|
||||
{
|
||||
struct switch_stack *sw = (struct switch_stack *)regs - 1;
|
||||
unsigned long *gregs = uc->uc_mcontext.gregs;
|
||||
unsigned long __user *gregs = uc->uc_mcontext.gregs;
|
||||
int err = 0;
|
||||
|
||||
err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
|
||||
@@ -162,7 +163,8 @@ static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
|
||||
return err;
|
||||
}
|
||||
|
||||
static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
|
||||
static inline void __user *get_sigframe(struct ksignal *ksig,
|
||||
struct pt_regs *regs,
|
||||
size_t frame_size)
|
||||
{
|
||||
unsigned long usp;
|
||||
@@ -174,13 +176,13 @@ static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
|
||||
usp = sigsp(usp, ksig);
|
||||
|
||||
/* Verify, is it 32 or 64 bit aligned */
|
||||
return (void *)((usp - frame_size) & -8UL);
|
||||
return (void __user *)((usp - frame_size) & -8UL);
|
||||
}
|
||||
|
||||
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
|
||||
struct pt_regs *regs)
|
||||
{
|
||||
struct rt_sigframe *frame;
|
||||
struct rt_sigframe __user *frame;
|
||||
int err = 0;
|
||||
|
||||
frame = get_sigframe(ksig, regs, sizeof(*frame));
|
||||
|
||||
@@ -17,6 +17,7 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err);
|
||||
const char *trap_name(unsigned long code);
|
||||
void do_page_fault(struct pt_regs *regs, unsigned long code,
|
||||
unsigned long address);
|
||||
int handle_nadtlb_fault(struct pt_regs *regs);
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
@@ -661,6 +661,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
|
||||
by hand. Technically we need to emulate:
|
||||
fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw
|
||||
*/
|
||||
if (code == 17 && handle_nadtlb_fault(regs))
|
||||
return;
|
||||
fault_address = regs->ior;
|
||||
fault_space = regs->isr;
|
||||
break;
|
||||
|
||||
@@ -424,3 +424,92 @@ no_context:
|
||||
goto no_context;
|
||||
pagefault_out_of_memory();
|
||||
}
|
||||
|
||||
/* Handle non-access data TLB miss faults.
|
||||
*
|
||||
* For probe instructions, accesses to userspace are considered allowed
|
||||
* if they lie in a valid VMA and the access type matches. We are not
|
||||
* allowed to handle MM faults here so there may be situations where an
|
||||
* actual access would fail even though a probe was successful.
|
||||
*/
|
||||
int
|
||||
handle_nadtlb_fault(struct pt_regs *regs)
|
||||
{
|
||||
unsigned long insn = regs->iir;
|
||||
int breg, treg, xreg, val = 0;
|
||||
struct vm_area_struct *vma, *prev_vma;
|
||||
struct task_struct *tsk;
|
||||
struct mm_struct *mm;
|
||||
unsigned long address;
|
||||
unsigned long acc_type;
|
||||
|
||||
switch (insn & 0x380) {
|
||||
case 0x280:
|
||||
/* FDC instruction */
|
||||
fallthrough;
|
||||
case 0x380:
|
||||
/* PDC and FIC instructions */
|
||||
if (printk_ratelimit()) {
|
||||
pr_warn("BUG: nullifying cache flush/purge instruction\n");
|
||||
show_regs(regs);
|
||||
}
|
||||
if (insn & 0x20) {
|
||||
/* Base modification */
|
||||
breg = (insn >> 21) & 0x1f;
|
||||
xreg = (insn >> 16) & 0x1f;
|
||||
if (breg && xreg)
|
||||
regs->gr[breg] += regs->gr[xreg];
|
||||
}
|
||||
regs->gr[0] |= PSW_N;
|
||||
return 1;
|
||||
|
||||
case 0x180:
|
||||
/* PROBE instruction */
|
||||
treg = insn & 0x1f;
|
||||
if (regs->isr) {
|
||||
tsk = current;
|
||||
mm = tsk->mm;
|
||||
if (mm) {
|
||||
/* Search for VMA */
|
||||
address = regs->ior;
|
||||
mmap_read_lock(mm);
|
||||
vma = find_vma_prev(mm, address, &prev_vma);
|
||||
mmap_read_unlock(mm);
|
||||
|
||||
/*
|
||||
* Check if access to the VMA is okay.
|
||||
* We don't allow for stack expansion.
|
||||
*/
|
||||
acc_type = (insn & 0x40) ? VM_WRITE : VM_READ;
|
||||
if (vma
|
||||
&& address >= vma->vm_start
|
||||
&& (vma->vm_flags & acc_type) == acc_type)
|
||||
val = 1;
|
||||
}
|
||||
}
|
||||
if (treg)
|
||||
regs->gr[treg] = val;
|
||||
regs->gr[0] |= PSW_N;
|
||||
return 1;
|
||||
|
||||
case 0x300:
|
||||
/* LPA instruction */
|
||||
if (insn & 0x20) {
|
||||
/* Base modification */
|
||||
breg = (insn >> 21) & 0x1f;
|
||||
xreg = (insn >> 16) & 0x1f;
|
||||
if (breg && xreg)
|
||||
regs->gr[breg] += regs->gr[xreg];
|
||||
}
|
||||
treg = insn & 0x1f;
|
||||
if (treg)
|
||||
regs->gr[treg] = 0;
|
||||
regs->gr[0] |= PSW_N;
|
||||
return 1;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@@ -173,7 +173,7 @@ else
|
||||
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
|
||||
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
|
||||
endif
|
||||
else
|
||||
else ifdef CONFIG_PPC_BOOK3E_64
|
||||
CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
|
||||
endif
|
||||
|
||||
|
||||
30
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
Normal file
30
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
Normal file
@@ -0,0 +1,30 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* T1040RDB-REV-A Device Tree Source
|
||||
*
|
||||
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "t1040rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,T1040RDB-REV-A";
|
||||
compatible = "fsl,T1040RDB-REV-A";
|
||||
};
|
||||
|
||||
&seville_port0 {
|
||||
label = "ETH5";
|
||||
};
|
||||
|
||||
&seville_port2 {
|
||||
label = "ETH7";
|
||||
};
|
||||
|
||||
&seville_port4 {
|
||||
label = "ETH9";
|
||||
};
|
||||
|
||||
&seville_port6 {
|
||||
label = "ETH11";
|
||||
};
|
||||
@@ -119,7 +119,7 @@
|
||||
managed = "in-band-status";
|
||||
phy-handle = <&phy_qsgmii_0>;
|
||||
phy-mode = "qsgmii";
|
||||
label = "ETH5";
|
||||
label = "ETH3";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -135,7 +135,7 @@
|
||||
managed = "in-band-status";
|
||||
phy-handle = <&phy_qsgmii_2>;
|
||||
phy-mode = "qsgmii";
|
||||
label = "ETH7";
|
||||
label = "ETH5";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -151,7 +151,7 @@
|
||||
managed = "in-band-status";
|
||||
phy-handle = <&phy_qsgmii_4>;
|
||||
phy-mode = "qsgmii";
|
||||
label = "ETH9";
|
||||
label = "ETH7";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -167,7 +167,7 @@
|
||||
managed = "in-band-status";
|
||||
phy-handle = <&phy_qsgmii_6>;
|
||||
phy-mode = "qsgmii";
|
||||
label = "ETH11";
|
||||
label = "ETH9";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -359,25 +359,37 @@ static inline void __raw_writeq_be(unsigned long v, volatile void __iomem *addr)
|
||||
*/
|
||||
static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
|
||||
{
|
||||
__asm__ __volatile__("stbcix %0,0,%1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
stbcix %0,0,%1; \
|
||||
.machine pop;"
|
||||
: : "r" (val), "r" (paddr) : "memory");
|
||||
}
|
||||
|
||||
static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
|
||||
{
|
||||
__asm__ __volatile__("sthcix %0,0,%1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
sthcix %0,0,%1; \
|
||||
.machine pop;"
|
||||
: : "r" (val), "r" (paddr) : "memory");
|
||||
}
|
||||
|
||||
static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
|
||||
{
|
||||
__asm__ __volatile__("stwcix %0,0,%1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
stwcix %0,0,%1; \
|
||||
.machine pop;"
|
||||
: : "r" (val), "r" (paddr) : "memory");
|
||||
}
|
||||
|
||||
static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
|
||||
{
|
||||
__asm__ __volatile__("stdcix %0,0,%1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
stdcix %0,0,%1; \
|
||||
.machine pop;"
|
||||
: : "r" (val), "r" (paddr) : "memory");
|
||||
}
|
||||
|
||||
@@ -389,7 +401,10 @@ static inline void __raw_rm_writeq_be(u64 val, volatile void __iomem *paddr)
|
||||
static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
|
||||
{
|
||||
u8 ret;
|
||||
__asm__ __volatile__("lbzcix %0,0, %1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
lbzcix %0,0, %1; \
|
||||
.machine pop;"
|
||||
: "=r" (ret) : "r" (paddr) : "memory");
|
||||
return ret;
|
||||
}
|
||||
@@ -397,7 +412,10 @@ static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
|
||||
static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
|
||||
{
|
||||
u16 ret;
|
||||
__asm__ __volatile__("lhzcix %0,0, %1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
lhzcix %0,0, %1; \
|
||||
.machine pop;"
|
||||
: "=r" (ret) : "r" (paddr) : "memory");
|
||||
return ret;
|
||||
}
|
||||
@@ -405,7 +423,10 @@ static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
|
||||
static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
|
||||
{
|
||||
u32 ret;
|
||||
__asm__ __volatile__("lwzcix %0,0, %1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
lwzcix %0,0, %1; \
|
||||
.machine pop;"
|
||||
: "=r" (ret) : "r" (paddr) : "memory");
|
||||
return ret;
|
||||
}
|
||||
@@ -413,7 +434,10 @@ static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
|
||||
static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
|
||||
{
|
||||
u64 ret;
|
||||
__asm__ __volatile__("ldcix %0,0, %1"
|
||||
__asm__ __volatile__(".machine push; \
|
||||
.machine power6; \
|
||||
ldcix %0,0, %1; \
|
||||
.machine pop;"
|
||||
: "=r" (ret) : "r" (paddr) : "memory");
|
||||
return ret;
|
||||
}
|
||||
|
||||
@@ -6,6 +6,8 @@
|
||||
#define SET_MEMORY_RW 1
|
||||
#define SET_MEMORY_NX 2
|
||||
#define SET_MEMORY_X 3
|
||||
#define SET_MEMORY_NP 4 /* Set memory non present */
|
||||
#define SET_MEMORY_P 5 /* Set memory present */
|
||||
|
||||
int change_memory_attr(unsigned long addr, int numpages, long action);
|
||||
|
||||
@@ -29,6 +31,14 @@ static inline int set_memory_x(unsigned long addr, int numpages)
|
||||
return change_memory_attr(addr, numpages, SET_MEMORY_X);
|
||||
}
|
||||
|
||||
int set_memory_attr(unsigned long addr, int numpages, pgprot_t prot);
|
||||
static inline int set_memory_np(unsigned long addr, int numpages)
|
||||
{
|
||||
return change_memory_attr(addr, numpages, SET_MEMORY_NP);
|
||||
}
|
||||
|
||||
static inline int set_memory_p(unsigned long addr, int numpages)
|
||||
{
|
||||
return change_memory_attr(addr, numpages, SET_MEMORY_P);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
@@ -125,8 +125,11 @@ do { \
|
||||
*/
|
||||
#define __get_user_atomic_128_aligned(kaddr, uaddr, err) \
|
||||
__asm__ __volatile__( \
|
||||
".machine push\n" \
|
||||
".machine altivec\n" \
|
||||
"1: lvx 0,0,%1 # get user\n" \
|
||||
" stvx 0,0,%2 # put kernel\n" \
|
||||
".machine pop\n" \
|
||||
"2:\n" \
|
||||
".section .fixup,\"ax\"\n" \
|
||||
"3: li %0,%3\n" \
|
||||
|
||||
@@ -669,7 +669,7 @@ static void __init kvm_use_magic_page(void)
|
||||
on_each_cpu(kvm_map_magic_page, &features, 1);
|
||||
|
||||
/* Quick self-test to see if the mapping works */
|
||||
if (!fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
|
||||
if (fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
|
||||
kvm_patching_worked = false;
|
||||
return;
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user