dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
Add YAML device tree binding for IMX519 CMOS image sensor, and the relevant MAINTAINERS entries. Signed-off-by: Lee Jackson <info@arducam.com>
This commit is contained in:
113
Documentation/devicetree/bindings/media/i2c/imx519.yaml
Normal file
113
Documentation/devicetree/bindings/media/i2c/imx519.yaml
Normal file
@@ -0,0 +1,113 @@
|
|||||||
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/media/i2c/imx519.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: Sony 1/2.5-Inch 16Mpixel CMOS Digital Image Sensor
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Lee Jackson <info@arducam.com>
|
||||||
|
|
||||||
|
description: |-
|
||||||
|
The Sony IMX519 is a 1/2.5-inch CMOS active pixel digital image sensor
|
||||||
|
with an active array size of 4656H x 3496V. It is programmable through
|
||||||
|
I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
|
||||||
|
Image data is sent through MIPI CSI-2, which is configured as either 2 or
|
||||||
|
4 data lanes.
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
const: sony,imx519
|
||||||
|
|
||||||
|
reg:
|
||||||
|
description: I2C device address
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
clocks:
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
VDIG-supply:
|
||||||
|
description:
|
||||||
|
Digital I/O voltage supply, 1.05 volts
|
||||||
|
|
||||||
|
VANA-supply:
|
||||||
|
description:
|
||||||
|
Analog voltage supply, 2.8 volts
|
||||||
|
|
||||||
|
VDDL-supply:
|
||||||
|
description:
|
||||||
|
Digital core voltage supply, 1.8 volts
|
||||||
|
|
||||||
|
reset-gpios:
|
||||||
|
description: |-
|
||||||
|
Reference to the GPIO connected to the xclr pin, if any.
|
||||||
|
Must be released (set high) after all supplies and INCK are applied.
|
||||||
|
|
||||||
|
# See ../video-interfaces.txt for more details
|
||||||
|
port:
|
||||||
|
type: object
|
||||||
|
properties:
|
||||||
|
endpoint:
|
||||||
|
type: object
|
||||||
|
properties:
|
||||||
|
data-lanes:
|
||||||
|
description: |-
|
||||||
|
The sensor supports either two-lane, or four-lane operation.
|
||||||
|
For two-lane operation the property must be set to <1 2>.
|
||||||
|
items:
|
||||||
|
- const: 1
|
||||||
|
- const: 2
|
||||||
|
|
||||||
|
clock-noncontinuous:
|
||||||
|
type: boolean
|
||||||
|
description: |-
|
||||||
|
MIPI CSI-2 clock is non-continuous if this property is present,
|
||||||
|
otherwise it's continuous.
|
||||||
|
|
||||||
|
link-frequencies:
|
||||||
|
allOf:
|
||||||
|
- $ref: /schemas/types.yaml#/definitions/uint64-array
|
||||||
|
description:
|
||||||
|
Allowed data bus frequencies.
|
||||||
|
|
||||||
|
required:
|
||||||
|
- link-frequencies
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- clocks
|
||||||
|
- VANA-supply
|
||||||
|
- VDIG-supply
|
||||||
|
- VDDL-supply
|
||||||
|
- port
|
||||||
|
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
i2c0 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
imx519: sensor@1a {
|
||||||
|
compatible = "sony,imx519";
|
||||||
|
reg = <0x1a>;
|
||||||
|
clocks = <&imx519_clk>;
|
||||||
|
VANA-supply = <&imx519_vana>; /* 2.8v */
|
||||||
|
VDIG-supply = <&imx519_vdig>; /* 1.05v */
|
||||||
|
VDDL-supply = <&imx519_vddl>; /* 1.8v */
|
||||||
|
|
||||||
|
port {
|
||||||
|
imx519_0: endpoint {
|
||||||
|
remote-endpoint = <&csi1_ep>;
|
||||||
|
data-lanes = <1 2>;
|
||||||
|
clock-noncontinuous;
|
||||||
|
link-frequencies = /bits/ 64 <493500000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
...
|
||||||
@@ -17531,6 +17531,14 @@ F: Documentation/devicetree/bindings/media/i2c/imx378.yaml
|
|||||||
F: Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
F: Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
||||||
F: drivers/media/i2c/imx477.c
|
F: drivers/media/i2c/imx477.c
|
||||||
|
|
||||||
|
SONY IMX519 SENSOR DRIVER
|
||||||
|
M: Arducam Kernel Maintenance <info@arducam.com>
|
||||||
|
L: linux-media@vger.kernel.org
|
||||||
|
S: Maintained
|
||||||
|
T: git git://linuxtv.org/media_tree.git
|
||||||
|
F: Documentation/devicetree/bindings/media/i2c/imx519.yaml
|
||||||
|
F: drivers/media/i2c/imx519.c
|
||||||
|
|
||||||
SONY MEMORYSTICK SUBSYSTEM
|
SONY MEMORYSTICK SUBSYSTEM
|
||||||
M: Maxim Levitsky <maximlevitsky@gmail.com>
|
M: Maxim Levitsky <maximlevitsky@gmail.com>
|
||||||
M: Alex Dubov <oakad@yahoo.com>
|
M: Alex Dubov <oakad@yahoo.com>
|
||||||
|
|||||||
Reference in New Issue
Block a user