In order to reconstruct frame for MBSSID feature, per the description of
the Reduced Neighbor Report(RNR) element about MLD parameters subfield in
section 9.4.2.170 of Draft P802.11be_D1.4, the RNR IE is modified:
1\ If the reported AP is affiliated with the same MLD of the reporting AP,
the TBTT information is skipped;
2\ If the reported AP is affiliated with the same MLD of the nontransmitted
BSSID, the TBTT information is copied and the MLD ID is changed to 0.
Signed-off-by: Paul Zhang <quic_paulz@quicinc.com>
Bug: 231937090
Link: https://lore.kernel.org/linux-wireless/1649335871-9173-1-git-send-email-quic_paulz@quicinc.com
Change-Id: I2bae85b813a2351a62d2788f0e76f13407d11645
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Changes in 5.15.35
drm/amd/display: Add pstate verification and recovery for DCN31
drm/amd/display: Fix p-state allow debug index on dcn31
hamradio: defer 6pack kfree after unregister_netdev
hamradio: remove needs_free_netdev to avoid UAF
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
ACPI: processor idle: Check for architectural support for LPI
ACPI: processor idle: Allow playing dead in C3 state
ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
btrfs: remove unused parameter nr_pages in add_ra_bio_pages()
btrfs: remove no longer used counter when reading data page
btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()
soc: qcom: aoss: Expose send for generic usecase
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
net: ipa: request IPA register values be retained
btrfs: release correct delalloc amount in direct IO write path
ALSA: core: Add snd_card_free_on_error() helper
ALSA: sis7019: Fix the missing error handling
ALSA: ali5451: Fix the missing snd_card_free() call at probe error
ALSA: als300: Fix the missing snd_card_free() call at probe error
ALSA: als4000: Fix the missing snd_card_free() call at probe error
ALSA: atiixp: Fix the missing snd_card_free() call at probe error
ALSA: au88x0: Fix the missing snd_card_free() call at probe error
ALSA: aw2: Fix the missing snd_card_free() call at probe error
ALSA: azt3328: Fix the missing snd_card_free() call at probe error
ALSA: bt87x: Fix the missing snd_card_free() call at probe error
ALSA: ca0106: Fix the missing snd_card_free() call at probe error
ALSA: cmipci: Fix the missing snd_card_free() call at probe error
ALSA: cs4281: Fix the missing snd_card_free() call at probe error
ALSA: cs5535audio: Fix the missing snd_card_free() call at probe error
ALSA: echoaudio: Fix the missing snd_card_free() call at probe error
ALSA: emu10k1x: Fix the missing snd_card_free() call at probe error
ALSA: ens137x: Fix the missing snd_card_free() call at probe error
ALSA: es1938: Fix the missing snd_card_free() call at probe error
ALSA: es1968: Fix the missing snd_card_free() call at probe error
ALSA: fm801: Fix the missing snd_card_free() call at probe error
ALSA: galaxy: Fix the missing snd_card_free() call at probe error
ALSA: hdsp: Fix the missing snd_card_free() call at probe error
ALSA: hdspm: Fix the missing snd_card_free() call at probe error
ALSA: ice1724: Fix the missing snd_card_free() call at probe error
ALSA: intel8x0: Fix the missing snd_card_free() call at probe error
ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error
ALSA: korg1212: Fix the missing snd_card_free() call at probe error
ALSA: lola: Fix the missing snd_card_free() call at probe error
ALSA: lx6464es: Fix the missing snd_card_free() call at probe error
ALSA: maestro3: Fix the missing snd_card_free() call at probe error
ALSA: oxygen: Fix the missing snd_card_free() call at probe error
ALSA: riptide: Fix the missing snd_card_free() call at probe error
ALSA: rme32: Fix the missing snd_card_free() call at probe error
ALSA: rme9652: Fix the missing snd_card_free() call at probe error
ALSA: rme96: Fix the missing snd_card_free() call at probe error
ALSA: sc6000: Fix the missing snd_card_free() call at probe error
ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error
ALSA: via82xx: Fix the missing snd_card_free() call at probe error
ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb
ALSA: nm256: Don't call card private_free at probe error path
drm/msm: Add missing put_task_struct() in debugfs path
firmware: arm_scmi: Remove clear channel call on the TX channel
memory: atmel-ebi: Fix missing of_node_put in atmel_ebi_probe
Revert "ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax"
firmware: arm_scmi: Fix sorting of retrieved clock rates
media: rockchip/rga: do proper error checking in probe
SUNRPC: Fix the svc_deferred_event trace class
net/sched: flower: fix parsing of ethertype following VLAN header
veth: Ensure eth header is in skb's linear part
gpiolib: acpi: use correct format characters
cifs: release cached dentries only if mount is complete
net: mdio: don't defer probe forever if PHY IRQ provider is missing
mlxsw: i2c: Fix initialization error flow
net/sched: fix initialization order when updating chain 0 head
net: dsa: felix: suppress -EPROBE_DEFER errors
net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
net/sched: taprio: Check if socket flags are valid
cfg80211: hold bss_lock while updating nontrans_list
netfilter: nft_socket: make cgroup match work in input too
drm/msm: Fix range size vs end confusion
drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()
drm/msm/dp: add fail safe mode outside of event_mutex context
net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63
scsi: pm80xx: Enable upper inbound, outbound queues
scsi: iscsi: Move iscsi_ep_disconnect()
scsi: iscsi: Fix offload conn cleanup when iscsid restarts
scsi: iscsi: Fix endpoint reuse regression
scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
scsi: iscsi: Fix unbound endpoint error handling
sctp: Initialize daddr on peeled off socket
netfilter: nf_tables: nft_parse_register can return a negative value
ALSA: ad1889: Fix the missing snd_card_free() call at probe error
ALSA: mtpav: Don't call card private_free at probe error path
io_uring: move io_uring_rsrc_update2 validation
io_uring: verify that resv2 is 0 in io_uring_rsrc_update2
io_uring: verify pad field is 0 in io_get_ext_arg
testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
ALSA: usb-audio: Increase max buffer size
ALSA: usb-audio: Limit max buffer and period sizes per time
perf tools: Fix misleading add event PMU debug message
macvlan: Fix leaking skb in source mode with nodst option
net: ftgmac100: access hardware register after clock ready
nfc: nci: add flush_workqueue to prevent uaf
cifs: potential buffer overflow in handling symlinks
dm mpath: only use ktime_get_ns() in historical selector
vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
block: fix offset/size check in bio_trim()
drm/amd: Add USBC connector ID
btrfs: fix fallocate to use file_modified to update permissions consistently
btrfs: do not warn for free space inode in cow_file_range
drm/amdgpu: conduct a proper cleanup of PDB bo
drm/amdgpu/gmc: use PCI BARs for APUs in passthrough
drm/amd/display: fix audio format not updated after edid updated
drm/amd/display: FEC check in timing validation
drm/amd/display: Update VTEM Infopacket definition
drm/amdkfd: Fix Incorrect VMIDs passed to HWS
drm/amdgpu/vcn: improve vcn dpg stop procedure
drm/amdkfd: Check for potential null return of kmalloc_array()
Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests
PCI: hv: Propagate coherence from VMbus device to PCI device
Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
scsi: target: tcmu: Fix possible page UAF
scsi: lpfc: Fix queue failures when recovering from PCI parity error
scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
net: micrel: fix KS8851_MLL Kconfig
ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
gpu: ipu-v3: Fix dev_dbg frequency output
regulator: wm8994: Add an off-on delay for WM8994 variant
arm64: alternatives: mark patch_alternative() as `noinstr`
tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry
net: axienet: setup mdio unconditionally
Drivers: hv: balloon: Disable balloon and hot-add accordingly
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
spi: cadence-quadspi: fix protocol setup for non-1-1-X operations
drm/amd/display: Enable power gating before init_pipes
drm/amd/display: Revert FEC check in validation
drm/amd/display: Fix allocate_mst_payload assert on resume
drbd: set QUEUE_FLAG_STABLE_WRITES
scsi: mpt3sas: Fail reset operation if config request timed out
scsi: mvsas: Add PCI ID of RocketRaid 2640
scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
drivers: net: slip: fix NPD bug in sl_tx_timeout()
io_uring: zero tag on rsrc removal
io_uring: use nospec annotation for more indexes
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
mm/secretmem: fix panic when growing a memfd_secret
mm, page_alloc: fix build_zonerefs_node()
mm: fix unexpected zeroed page mapping with zram swap
mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded
SUNRPC: Fix NFSD's request deferral on RDMA transports
memory: renesas-rpc-if: fix platform-device leak in error path
gcc-plugins: latent_entropy: use /dev/urandom
cifs: verify that tcon is valid before dereference in cifs_kill_sb
ath9k: Properly clear TX status area before reporting to mac80211
ath9k: Fix usage of driver-private space in tx_info
btrfs: fix root ref counts in error handling in btrfs_get_root_ref
btrfs: mark resumed async balance as writing
ALSA: hda/realtek: Add quirk for Clevo PD50PNT
ALSA: hda/realtek: add quirk for Lenovo Thinkpad X12 speakers
ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
nl80211: correctly check NL80211_ATTR_REG_ALPHA2 size
ipv6: fix panic when forwarding a pkt with no in6 dev
drm/amd/display: don't ignore alpha property on pre-multiplied mode
drm/amdgpu: Enable gfxoff quirk on MacBook Pro
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
x86/tsx: Disable TSX development mode at boot
genirq/affinity: Consider that CPUs on nodes can be unbalanced
tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
ARM: davinci: da850-evm: Avoid NULL pointer dereference
dm integrity: fix memory corruption when tag_size is less than digest size
i2c: dev: check return value when calling dev_set_name()
smp: Fix offline cpu check in flush_smp_call_function_queue()
i2c: pasemi: Wait for write xfers to finish
dt-bindings: net: snps: remove duplicate name
timers: Fix warning condition in __run_timers()
dma-direct: avoid redundant memory sync for swiotlb
drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL
cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
soc: qcom: aoss: Fix missing put_device call in qmp_get
net: ipa: fix a build dependency
cpufreq: intel_pstate: ITMT support for overclocked system
ax25: add refcount in ax25_dev to avoid UAF bugs
ax25: fix reference count leaks of ax25_dev
ax25: fix UAF bugs of net_device caused by rebinding operation
ax25: Fix refcount leaks caused by ax25_cb_del()
ax25: fix UAF bug in ax25_send_control()
ax25: fix NPD bug in ax25_disconnect
ax25: Fix NULL pointer dereferences in ax25 timers
ax25: Fix UAF bugs in ax25 timers
Linux 5.15.35
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0dd9eaea7f977df42b0a5b9cb9043c879f62718b
[ Upstream commit a5199b5626cd6913cf8776a835bc63d40e0686ad ]
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Another set of updates, all over the map:
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, _everything_ in cfg80211 holds the RTNL, and if you
have a slow USB device (or a few) you can get some bad lock
contention on that.
Fix that by re-adding a mutex to each wiphy/rdev as we had at
some point, so we have locking for the wireless_dev lists and
all the other things in there, and also so that drivers still
don't have to worry too much about it (they still won't get
parallel calls for a single device).
Then, we can restrict the RTNL to a few cases where we add or
remove interfaces and really need the added protection. Some
of the global list management still also uses the RTNL, since
we need to have it anyway for netdev management, but we only
hold the RTNL for very short periods of time here.
Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The for-loop iterates with a u8 loop counter and compares this
with the loop upper limit of request->n_ssids which is an int type.
There is a potential infinite loop if n_ssids is larger than the
u8 loop counter, so fix this by making the loop counter an int.
Addresses-Coverity: ("Infinite loop")
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The low level driver adds its own opaque information
in the BSS table in the cfg80211_bss structure.
The low level driver may need to signal that this information
is no longer relevant and needs to be recreated.
Add an API to allow the low level driver to do that.
iwlwifi needs this because it keeps there an information about
the firmware's internal clock. This is kept in mac80211's
struct ieee80211_bss::sync_device_ts.
This information is populated while we scan, we add the
internal firmware's clock to each beacon which allows us to
program the firmware correctly after association so that
it'll know when (in terms of its internal clock) the DTIM
and TBTT will happen.
When the firmware is reset this internal clock is reset as
well and ieee80211_bss::sync_device_ts is no longer accurate.
iwlwifi will call this new API any time the firmware is started.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some bands (S1G) define channels centered on a non-integer
MHz. Give ieee80211_channel and cfg80211_chan_def a
freq_offset component where the final frequency can be
expressed as:
MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset;
Also provide some helper functions to do the frequency
conversion and test for equality.
Retain the existing interface to frequency and channel
conversion helpers, and expose new ones which handle
frequencies in units of KHz.
Some internal functions (net/wireless/chan.c) pass around
a frequency value. Convert these to units of KHz.
mesh, ibss, wext, etc. are currently ignored.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_update_notlisted_nontrans() leaves the RCU critical session
too early, while still using nontrans_ssid which is RCU protected. In
addition, it performs a bunch of RCU pointer update operations such
as rcu_access_pointer and rcu_assign_pointer.
The caller, cfg80211_inform_bss_frame_data(), also accesses the RCU
pointer without holding the lock.
Just wrap all of this with bss_lock.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20191004123706.15768-3-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code copying the data assumes that the SSID element is
before the MBSSID element, but since the data is untrusted
from the AP, this cannot be guaranteed.
Validate that this is indeed the case and ignore the MBSSID
otherwise, to avoid having to deal with both cases for the
copy of data that should be between them.
Cc: stable@vger.kernel.org
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When associated BSS completes channel switch procedure, its channel
record needs to be updated. The existing mac80211 solution was
extended to cfg80211 in commit 5dc8cdce1d ("mac80211/cfg80211:
update bss channel on channel switch").
However that solution still appears to be incomplete as it may lead
to duplicated scan entries for associated BSS after channel switch.
The root cause of the problem is as follows. Each BSS entry is
included into the following data structures:
- bss list rdev->bss_list
- bss search tree rdev->bss_tree
Updating BSS channel record without rebuilding bss_tree may break
tree search since cmp_bss considers all of the following: channel,
bssid, ssid. When BSS channel is updated, but its location in bss_tree
is not updated, then subsequent search operations may fail to locate
this BSS since they will be traversing bss_tree in wrong direction.
As a result, for scan performed after associated BSS channel switch,
cfg80211_bss_update may add the second entry for the same BSS to both
bss_list and bss_tree, rather then update the existing one.
To summarize, if BSS channel needs to be updated, then bss_tree should
be rebuilt in order to put updated BSS entry into a proper location.
This commit suggests the following straightforward solution:
- if new entry has been already created for BSS after channel switch,
then use its IEs to update known BSS entry and then remove new
entry completely
- use rb_erase/rb_insert_bss reinstall updated BSS in bss_tree
- for nontransmit BSS entry, the whole transmit BSS hierarchy
is updated
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20190726163922.27509-3-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The seen_indices variable is u64 and in other parts of the code we
assume mbssid_index_ie[2] can be up to 45, so we should use the 64-bit
versions of BIT, namely, BIT_ULL().
Reported-by: Dan Carpented <dan.carpenter@oracle.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a function that iterates over the BSS entries associated with a
given wiphy and calls a callback for each iterated BSS. This can be
used by drivers in various ways, e.g., to evaluate some property for
all the BSSs in the medium.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the BSS is expired during connection, the connect result will
trigger a kernel warning. Ideally cfg80211 should hold the BSS
before the connection is attempted, but as the BSSID is not known
in case of auth/assoc MLME offload (connect op) it doesn't.
For those drivers without the connect op cfg80211 holds down the
reference so it wil not be removed from list.
Fix this by removing the warning and silently adding the BSS back to
the bss list which is return by the driver (with proper BSSID set) or
in case the BSS is already added use that.
The requirements for drivers are documented in the API's.
Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk>
[formatting fixes, keep old timestamp]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Various updates, notably:
* extended key ID support (from 802.11-2016)
* per-STA TX power control support
* mac80211 TX performance improvements
* HE (802.11ax) updates
* mesh link probing support
* enhancements of multi-BSSID support (also related to HE)
* OWE userspace processing support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The cfg80211_merge_profile() and ieee802_11_find_bssid_profile() are
a bit cleaner if we just pass the merged_ie pointer instead of a pointer
to the pointer.
This isn't a functional change, it's just a clean up.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since an element is limited to 255 octets, a profile may be split
split to several elements. Support the split as defined in the 11ax
draft 3. Detect legacy split and print a net-rate limited warning,
since there is no ROI in supporting this probably non-existent
split.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When creating the IEs for the nontransmitted BSS, the index
element is skipped. However, we need to get DTIM values from
it, so don't skip it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
new_ie is used as a temporary storage for the generation of
the new elements. However, after copying from it the memory
wasn't freed and leaked. Free it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Extension IEs have ID 255 followed by extension ID. Current
code is buggy in handling it in two ways:
1. When checking if IE is in the frame, it uses just the ID, which
for extension elements is too broad.
2. It uses 0xFF to mark copied IEs, which will result in not copying
extension IEs from the subelement.
Fix both issue.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
