05760b29af91331cde17e8d24ffcb357e2f9a5d2
143 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
b41a37c036 |
Merge 5.15.33 into android13-5.15
Changes in 5.15.33
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
USB: serial: pl2303: add IBM device IDs
dt-bindings: usb: hcd: correct usb-device path
USB: serial: pl2303: fix GS type detection
USB: serial: simple: add Nokia phone driver
mm: kfence: fix missing objcg housekeeping for SLAB
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
HID: logitech-dj: add new lightspeed receiver id
HID: Add support for open wheel and no attachment to T300
xfrm: fix tunnel model fragmentation behavior
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
virtio_console: break out of buf poll on remove
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
tools/virtio: fix virtio_test execution
ethernet: sun: Free the coherent when failing in probing
gpio: Revert regression in sysfs-gpio (gpiolib.c)
spi: Fix invalid sgs value
net:mcf8390: Use platform_get_irq() to get the interrupt
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
spi: Fix erroneous sgs value with min_t()
Input: zinitix - do not report shadow fingers
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
net: dsa: microchip: add spi_device_id tables
selftests: vm: fix clang build error multiple output files
locking/lockdep: Avoid potential access of invalid memory in lock_class
drm/amdgpu: move PX checking into amdgpu_device_ip_early_init
drm/amdgpu: only check for _PR3 on dGPUs
iommu/iova: Improve 32-bit free space estimate
virtio-blk: Use blk_validate_block_size() to validate block size
tpm: fix reference counting for struct tpm_chip
usb: typec: tipd: Forward plug orientation to typec subsystem
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
xhci: fix garbage USBSTS being logged in some cases
xhci: fix runtime PM imbalance in USB2 resume
xhci: make xhci_handshake timeout for xhci_reset() adjustable
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
mei: me: disable driver on the ign firmware
mei: me: add Alder Lake N device id.
mei: avoid iterator usage outside of list_for_each_entry
bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series
bus: mhi: Fix MHI DMA structure endianness
docs: sphinx/requirements: Limit jinja2<3.1
coresight: Fix TRCCONFIGR.QE sysfs interface
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device
iio: afe: rescale: use s64 for temporary scale calculations
iio: inkern: apply consumer scale on IIO_VAL_INT cases
iio: inkern: apply consumer scale when no channel scale is available
iio: inkern: make a best effort on offset calculation
greybus: svc: fix an error handling bug in gb_svc_hello()
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk: uniphier: Fix fixed-rate initialization
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
cifs: fix handlecache and multiuser
cifs: we do not need a spinlock around the tree access during umount
KEYS: fix length validation in keyctl_pkey_params_get_2()
KEYS: asymmetric: enforce that sig algo matches key algo
KEYS: asymmetric: properly validate hash_algo and encoding
Documentation: add link to stable release candidate tree
Documentation: update stable tree link
firmware: stratix10-svc: add missing callback parameter on RSU
firmware: sysfb: fix platform-device leak in error path
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update
SUNRPC: avoid race between mod_timer() and del_timer_sync()
NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTR
NFSD: prevent underflow in nfssvc_decode_writeargs()
NFSD: prevent integer overflow on 32 bit systems
f2fs: fix to unlock page correctly in error path of is_alive()
f2fs: quota: fix loop condition at f2fs_quota_sync()
f2fs: fix to do sanity check on .cp_pack_total_block_count
remoteproc: Fix count check in rproc_coredump_write()
mm/mlock: fix two bugs in user_shm_lock()
pinctrl: ingenic: Fix regmap on X series SoCs
pinctrl: samsung: drop pin banks references on error paths
net: bnxt_ptp: fix compilation error
spi: mxic: Fix the transmit path
mtd: rawnand: protect access to rawnand devices while in suspend
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
can: m_can: m_can_tx_handler(): fix use after free of skb
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
jffs2: fix memory leak in jffs2_do_mount_fs
jffs2: fix memory leak in jffs2_scan_medium
mm: fs: fix lru_cache_disabled race in bh_lru
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
mm: invalidate hwpoison page cache page in fault path
mempolicy: mbind_range() set_policy() after vma_merge()
scsi: core: sd: Add silence_suspend flag to suppress some PM messages
scsi: ufs: Fix runtime PM messages never-ending cycle
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
qed: display VF trust config
qed: validate and restrict untrusted VFs vlan promisc mode
riscv: dts: canaan: Fix SPI3 bus width
riscv: Fix fill_callchain return value
riscv: Increase stack size under KASAN
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
cifs: prevent bad output lengths in smb2_ioctl_query_info()
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
rtc: mc146818-lib: fix locking in mc146818_set_time
rtc: pl031: fix rtc features null pointer dereference
ocfs2: fix crash when mount with quota enabled
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels
mm: madvise: skip unmapped vma holes passed to process_madvise
mm: madvise: return correct bytes advised with process_madvise
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"
mm,hwpoison: unmap poisoned page before invalidation
mm/kmemleak: reset tag when compare object pointer
dm stats: fix too short end duration_ns when using precise_timestamps
dm: fix use-after-free in dm_cleanup_zoned_dev()
dm: interlock pending dm_io and dm_wait_for_bios_completion
dm: fix double accounting of flush with data
dm integrity: set journal entry unused when shrinking device
tracing: Have trace event string test handle zero length strings
drbd: fix potential silent data corruption
powerpc/kvm: Fix kvm_use_magic_page
PCI: fu740: Force 2.5GT/s for initial device probe
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2
arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs
arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs
arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs
arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: properties: Consistently return -ENOENT if there are no more references
coredump: Also dump first pages of non-executable ELF libraries
ext4: fix ext4_fc_stats trace point
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
ext4: make mb_optimize_scan performance mount option work with extents
drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
samples/landlock: Fix path_list memory leak
landlock: Use square brackets around "landlock-ruleset"
mailbox: tegra-hsp: Flush whole channel
block: limit request dispatch loop duration
block: don't merge across cgroup boundaries if blkcg is enabled
drm/edid: check basic audio support on CEA extension block
fbdev: Hot-unplug firmware fb devices on forced removal
video: fbdev: sm712fb: Fix crash in smtcfb_read()
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
rfkill: make new event layout opt-in
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
ARM: dts: exynos: add missing HDMI supplies on SMDK5250
ARM: dts: exynos: add missing HDMI supplies on SMDK5420
mgag200 fix memmapsl configuration in GCTL6 register
carl9170: fix missing bit-wise or operator for tx_params
pstore: Don't use semaphores in always-atomic-context code
thermal: int340x: Increase bitmap size
lib/raid6/test: fix multiple definition linking error
exec: Force single empty string when argv is empty
crypto: rsa-pkcs1pad - only allow with rsa
crypto: rsa-pkcs1pad - correctly get hash from source scatterlist
crypto: rsa-pkcs1pad - restore signature length check
crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()
bcache: fixup multiple threads crash
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
DEC: Limit PMAX memory probing to R3k systems
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC
media: venus: hfi_cmds: List HDR10 property as unsupported for v1 and v3
media: venus: venc: Fix h264 8x8 transform control
media: davinci: vpif: fix unbalanced runtime PM get
media: davinci: vpif: fix unbalanced runtime PM enable
btrfs: zoned: mark relocation as writing
btrfs: extend locking to all space_info members accesses
btrfs: verify the tranisd of the to-be-written dirty extent buffer
xtensa: define update_mmu_tlb function
xtensa: fix stop_machine_cpuslocked call in patch_text
xtensa: fix xtensa_wsr always writing 0
drm/syncobj: flatten dma_fence_chains on transfer
drm/nouveau/backlight: Fix LVDS backlight detection on some laptops
drm/nouveau/backlight: Just set all backlight types as RAW
drm/fb-helper: Mark screen buffers in system memory with FBINFO_VIRTFB
brcmfmac: firmware: Allocate space for default boardrev in nvram
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path
brcmfmac: pcie: Declare missing firmware files in pcie.c
brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
brcmfmac: pcie: Fix crashes due to early IRQs
drm/i915/opregion: check port number bounds for SWSCI display power state
drm/i915/gem: add missing boundary check in vm_access
PCI: imx6: Allow to probe when dw_pcie_wait_for_link() fails
PCI: pciehp: Clear cmd_busy bit in polling mode
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
regulator: qcom_smd: fix for_each_child.cocci warnings
selinux: access superblock_security_struct in LSM blob way
selinux: check return value of sel_make_avc_files
crypto: ccp - Ensure psp_ret is always init'd in __sev_platform_init_locked()
hwrng: cavium - Check health status while reading random data
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER
crypto: sun8i-ss - really disable hash on A80
crypto: authenc - Fix sleep in atomic context in decrypt_tail
crypto: mxs-dcp - Fix scatterlist processing
selinux: Fix selinux_sb_mnt_opts_compat()
thermal: int340x: Check for NULL after calling kmemdup()
crypto: octeontx2 - remove CONFIG_DM_CRYPT check
spi: tegra114: Add missing IRQ check in tegra_spi_probe
spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe
stack: Constrain and fix stack offset randomization with Clang builds
arm64/mm: avoid fixmap race condition when create pud mapping
blk-cgroup: set blkg iostat after percpu stat aggregation
selftests/x86: Add validity check and allow field splitting
selftests/sgx: Treat CC as one argument
crypto: rockchip - ECB does not need IV
audit: log AUDIT_TIME_* records only from rules
EVM: fix the evm= __setup handler return value
crypto: ccree - don't attempt 0 len DMA mappings
crypto: hisilicon/sec - fix the aead software fallback for engine
spi: pxa2xx-pci: Balance reference count for PCI DMA device
hwmon: (pmbus) Add mutex to regulator ops
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
nvme: cleanup __nvme_check_ids
nvme: fix the check for duplicate unique identifiers
block: don't delete queue kobject before its children
PM: hibernate: fix __setup handler error handling
PM: suspend: fix return value of __setup handler
spi: spi-zynqmp-gqspi: Handle error for dma_set_mask
hwrng: atmel - disable trng on failure path
crypto: sun8i-ss - call finalize with bh disabled
crypto: sun8i-ce - call finalize with bh disabled
crypto: amlogic - call finalize with bh disabled
crypto: gemini - call finalize with bh disabled
crypto: vmx - add missing dependencies
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
clocksource/drivers/exynos_mct: Refactor resources allocation
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
clocksource/drivers/timer-microchip-pit64b: Use notrace
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
arm64: prevent instrumentation of bp hardening callbacks
KEYS: trusted: Fix trusted key backends when building as module
KEYS: trusted: Avoid calling null function trusted_key_exit
ACPI: APEI: fix return value of __setup handlers
crypto: ccp - ccp_dmaengine_unregister release dma channels
crypto: ccree - Fix use after free in cc_cipher_exit()
hwrng: nomadik - Change clk_disable to clk_disable_unprepare
hwmon: (pmbus) Add Vin unit off handling
clocksource: acpi_pm: fix return value of __setup handler
io_uring: don't check unrelated req->open.how in accept request
io_uring: terminate manual loop iterator loop correctly for non-vecs
watch_queue: Fix NULL dereference in error cleanup
watch_queue: Actually free the watch
f2fs: fix to enable ATGC correctly via gc_idle sysfs interface
sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
sched/core: Export pelt_thermal_tp
sched/uclamp: Fix iowait boost escaping uclamp restriction
rseq: Remove broken uapi field layout on 32-bit little endian
perf/core: Fix address filter parser for multiple filters
perf/x86/intel/pt: Fix address filter config for 32-bit kernel
sched/fair: Improve consistency of allowed NUMA balance calculations
f2fs: fix missing free nid in f2fs_handle_failed_inode
nfsd: more robust allocation failure handling in nfsd_file_cache_init
sched/cpuacct: Fix charge percpu cpuusage
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
f2fs: fix to avoid potential deadlock
btrfs: fix unexpected error path when reflinking an inline extent
f2fs: fix compressed file start atomic write may cause data corruption
selftests, x86: fix how check_cc.sh is being invoked
drivers/base/memory: add memory block to memory group after registration succeeded
kunit: make kunit_test_timeout compatible with comment
pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size
media: camss: csid-170: fix non-10bit formats
media: camss: csid-170: don't enable unused irqs
media: camss: csid-170: set the right HALT_CMD when disabled
media: camss: vfe-170: fix "VFE halt timeout" error
media: staging: media: imx: imx7-mipi-csis: Make subdev name unique
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls
media: mtk-vcodec: potential dereference of null pointer
media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation
media: imx: imx8mq-mipi_csi2: fix system resume
media: bttv: fix WARNING regression on tunerless devices
media: atmel: atmel-sama7g5-isc: fix ispck leftover
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting
ASoC: simple-card-utils: Set sysclk on all components
media: coda: Fix missing put_device() call in coda_get_vdoa_data
media: meson: vdec: potential dereference of null pointer
media: hantro: Fix overfill bottom register field name
media: ov6650: Fix set format try processing path
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers
media: ov5648: Don't pack controls struct
media: aspeed: Correct value for h-total-pixels
video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen
video: fbdev: controlfb: Fix COMPILE_TEST build
video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()
video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
ARM: dts: Fix OpenBMC flash layout label addresses
firmware: qcom: scm: Remove reassignment to desc following initializer
ARM: dts: qcom: ipq4019: fix sleep clock
soc: qcom: rpmpd: Check for null return of devm_kcalloc
soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem
soc: qcom: aoss: remove spurious IRQF_ONESHOT flags
arm64: dts: qcom: sdm845: fix microphone bias properties and values
arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema
arm64: dts: broadcom: bcm4908: use proper TWD binding
arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc
arm64: dts: qcom: sm8350: Correct TCS configuration for apps rsc
firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined
soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
vsprintf: Fix potential unaligned access
ARM: dts: imx: Add missing LVDS decoder on M53Menlo
media: mexon-ge2d: fixup frames size in registers
media: video/hdmi: handle short reads of hdmi info frame.
media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats()
media: em28xx: initialize refcount before kref_get
media: usb: go7007: s2250-board: fix leak in probe()
media: cedrus: H265: Fix neighbour info buffer size
media: cedrus: h264: Fix neighbour info buffer size
ASoC: codecs: rx-macro: fix accessing compander for aux
ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type
ASoC: codecs: va-macro: fix accessing array out of bounds for enum type
ASoC: codecs: wc938x: fix accessing array out of bounds for enum type
ASoC: codecs: wcd938x: fix kcontrol max values
ASoC: codecs: wcd934x: fix kcontrol max values
ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put
media: v4l2-core: Initialize h264 scaling matrix
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
selftests/lkdtm: Add UBSAN config
lib: uninline simple_strntoull() as well
vsprintf: Fix %pK with kptr_restrict == 0
uaccess: fix nios2 and microblaze get_user_8()
ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()
soc: mediatek: pm-domains: Add wakeup capacity support in power domain
mmc: sdhci_am654: Fix the driver data of AM64 SoC
ASoC: ti: davinci-i2s: Add check for clk_enable()
ALSA: spi: Add check for clk_enable()
arm64: dts: ns2: Fix spi-cpol and spi-cpha property
arm64: dts: broadcom: Fix sata nodename
printk: fix return value of printk.devkmsg __setup handler
ASoC: mxs-saif: Handle errors for clk_enable
ASoC: atmel_ssc_dai: Handle errors for clk_enable
ASoC: dwc-i2s: Handle errors for clk_enable
ASoC: soc-compress: prevent the potentially use of null pointer
memory: emif: Add check for setup_interrupts
memory: emif: check the pointer temp in get_device_details()
ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
media: vidtv: Check for null return of vzalloc
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
ASoC: wm8350: Handle error for wm8350_register_irq
ASoC: fsi: Add check for clk_enable
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
media: saa7134: fix incorrect use to determine if list is empty
ivtv: fix incorrect device_caps for ivtvfb
ASoC: atmel: Fix error handling in snd_proto_probe
ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe
ASoC: SOF: Add missing of_node_put() in imx8m_probe
ASoC: mediatek: use of_device_get_match_data()
ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe
ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe
ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
ASoC: fsl_spdif: Disable TX clock when stop
ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
ASoC: SOF: Intel: enable DMI L1 for playback streams
ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe
mmc: davinci_mmc: Handle error for clk_enable
ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe
ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe
ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data
ASoC: amd: Fix reference to PCM buffer address
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx
drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops
drm/meson: Make use of the helper function devm_platform_ioremap_resourcexxx()
drm/meson: split out encoder from meson_dw_hdmi
drm/meson: Fix error handling when afbcd.ops->init fails
drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev
drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe
drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe
drm: bridge: adv7511: Fix ADV7535 HPD enablement
ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern
drm/v3d/v3d_drv: Check for error num after setting mask
drm/panfrost: Check for error num after setting mask
libbpf: Fix possible NULL pointer dereference when destroying skeleton
bpftool: Only set obj->skeleton on complete success
udmabuf: validate ubuf->pagecount
bpf: Fix UAF due to race between btf_try_get_module and load_module
drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode
selftests: bpf: Fix bind on used port
Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products
Bluetooth: hci_serdev: call init_rwsem() before p->open()
mtd: onenand: Check for error irq
mtd: rawnand: gpmi: fix controller timings setting
drm/edid: Don't clear formats if using deep color
drm/edid: Split deep color modes between RGB and YUV444
ionic: fix type complaint in ionic_dev_cmd_clean()
ionic: start watchdog after all is setup
ionic: Don't send reset commands if FW isn't running
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()
drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function
net: phy: at803x: move page selection fix to config_init
selftests/bpf: Normalize XDP section names in selftests
selftests/bpf/test_xdp_redirect_multi: use temp netns for testing
ath9k_htc: fix uninit value bugs
RDMA/core: Set MR type in ib_reg_user_mr
KVM: PPC: Fix vmx/vsx mixup in mmio emulation
selftests/net: timestamping: Fix bind_phc check
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
i40e: respect metadata on XSK Rx to skb
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
ixgbe: respect metadata on XSK Rx to skb
power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe
ray_cs: Check ioremap return value
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init
powerpc/perf: Don't use perf_hw_context for trace IMC PMU
mt76: connac: fix sta_rec_wtbl tag len
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
mt76: mt7921: fix a leftover race in runtime-pm
mt76: mt7615: fix a leftover race in runtime-pm
mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
ptp: unregister virtual clocks when unregistering physical clock.
net: dsa: mv88e6xxx: Enable port policy support on 6097
mac80211: Remove a couple of obsolete TODO
mac80211: limit bandwidth in HE capabilities
scripts/dtc: Call pkg-config POSIXly correct
livepatch: Fix build failure on 32 bits processors
net: asix: add proper error handling of usb read errors
i2c: bcm2835: Use platform_get_irq() to get the interrupt
i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'
mtd: mchp23k256: Add SPI ID table
mtd: mchp48l640: Add SPI ID table
igc: avoid kernel warning when changing RX ring parameters
igb: refactor XDP registration
PCI: aardvark: Fix reading MSI interrupt number
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge
RDMA/rxe: Check the last packet by RXE_END_MASK
libbpf: Fix signedness bug in btf_dump_array_data()
cxl/core: Fix cxl_probe_component_regs() error message
cxl/regs: Fix size of CXL Capability Header Register
net:enetc: allocate CBD ring data memory using DMA coherent methods
libbpf: Fix compilation warning due to mismatched printf format
drm/bridge: dw-hdmi: use safe format when first in bridge chain
libbpf: Use dynamically allocated buffer when receiving netlink messages
power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
iommu/ipmmu-vmsa: Check for error num after setting mask
drm/bridge: anx7625: Fix overflow issue on reading EDID
bpftool: Fix the error when lookup in no-btf maps
drm/amd/pm: enable pm sysfs write for one VF mode
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
libbpf: Fix memleak in libbpf_netlink_recv()
IB/cma: Allow XRC INI QPs to set their local ACK timeout
dax: make sure inodes are flushed before destroy cache
selftests: mptcp: add csum mib check for mptcp_connect
iwlwifi: mvm: Don't call iwl_mvm_sta_from_mac80211() with NULL sta
iwlwifi: mvm: don't iterate unadded vifs when handling FW SMPS req
iwlwifi: mvm: align locking in D3 test debugfs
iwlwifi: yoyo: remove DBGI_SRAM address reset writing
iwlwifi: Fix -EIO error code that is never returned
iwlwifi: mvm: Fix an error code in iwl_mvm_up()
mtd: rawnand: pl353: Set the nand chip node as the flash node
drm/msm/dp: populate connector of struct dp_panel
drm/msm/dp: stop link training after link training 2 failed
drm/msm/dp: always add fail-safe mode into connector mode list
drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent
drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode
drm/msm/dpu: add DSPP blocks teardown
drm/msm/dpu: fix dp audio condition
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS
vfio/pci: fix memory leak during D3hot to D0 transition
vfio/pci: wake-up devices around reset functions
scsi: fnic: Fix a tracing statement
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()
scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()
scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()
scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()
scsi: pm8001: Fix NCQ NON DATA command task initialization
scsi: pm8001: Fix NCQ NON DATA command completion handling
scsi: pm8001: Fix abort all task initialization
RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR
drm/amd/display: Remove vupdate_int_entry definition
TOMOYO: fix __setup handlers return values
power: supply: sbs-charger: Don't cancel work that is not initialized
ext2: correct max file size computing
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return
scsi: hisi_sas: Change permission of parameter prot_mask
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
bpf, arm64: Call build_prologue() first in first JIT pass
bpf, arm64: Feed byte-offset into bpf line info
xsk: Fix race at socket teardown
RDMA/irdma: Fix netdev notifications for vlan's
RDMA/irdma: Fix Passthrough mode in VM
RDMA/irdma: Remove incorrect masking of PD
gpu: host1x: Fix a memory leak in 'host1x_remove()'
libbpf: Skip forward declaration when counting duplicated type names
powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()
powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit
KVM: x86: Fix emulation in writing cr8
KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
hv_balloon: rate-limit "Unhandled message" warning
i2c: xiic: Make bus names unique
power: supply: wm8350-power: Handle error for wm8350_register_irq
power: supply: wm8350-power: Add missing free in free_charger_irq
IB/hfi1: Allow larger MTU without AIP
RDMA/core: Fix ib_qp_usecnt_dec() called when error
PCI: Reduce warnings on possible RW1C corruption
net: axienet: fix RX ring refill allocation failure handling
drm/msm/a6xx: Fix missing ARRAY_SIZE() check
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
powerpc/sysdev: fix incorrect use to determine if list is empty
powerpc/64s: Don't use DSISR for SLB faults
mfd: mc13xxx: Add check for mc13xxx_irq_request
libbpf: Unmap rings when umem deleted
selftests/bpf: Make test_lwt_ip_encap more stable and faster
platform/x86: huawei-wmi: check the return value of device_create_file()
scsi: mpt3sas: Fix incorrect 4GB boundary check
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
vxcan: enable local echo for sent CAN frames
ath10k: Fix error handling in ath10k_setup_msa_resources
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
MIPS: RB532: fix return value of __setup handler
MIPS: pgalloc: fix memory leak caused by pgd_free()
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
power: ab8500_chargalg: Use CLOCK_MONOTONIC
RDMA/irdma: Prevent some integer underflows
Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
bpf, sockmap: Fix memleak in sk_psock_queue_msg
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full
bpf, sockmap: Fix more uncharged while msg has more_data
bpf, sockmap: Fix double uncharge the mem of sk_msg
samples/bpf, xdpsock: Fix race when running for fix duration of time
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
drm/i915/display: Fix HPD short pulse handling for eDP
netfilter: flowtable: Fix QinQ and pppoe support for inet table
mt76: mt7921: fix mt7921_queues_acq implementation
can: isotp: sanitize CAN ID checks in isotp_bind()
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket
can: isotp: support MSG_TRUNC flag when reading from socket
bareudp: use ipv6_mod_enabled to check if IPv6 enabled
ibmvnic: fix race between xmit and reset
af_unix: Fix some data-races around unix_sk(sk)->oob_skb.
selftests/bpf: Fix error reporting from sock_fields programs
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates
af_netlink: Fix shift out of bounds in group mask calculation
i2c: meson: Fix wrong speed use from probe
netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
powerpc/pseries: Fix use after free in remove_phb_dynamic()
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
PCI: Avoid broken MSI on SB600 USB devices
net: bcmgenet: Use stronger register read/writes to assure ordering
tcp: ensure PMTU updates are processed during fastopen
openvswitch: always update flow key after nat
net: dsa: fix panic on shutdown if multi-chip tree failed to probe
tipc: fix the timer expires after interval 100ms
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
ice: fix 'scheduling while atomic' on aux critical err interrupt
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
kernel/resource: fix kfree() of bootmem memory again
staging: r8188eu: convert DBG_88E_LEVEL call in hal/rtl8188e_hal_init.c
staging: r8188eu: release_firmware is not called if allocation fails
mxser: fix xmit_buf leak in activate when LSR == 0xff
fsi: scom: Fix error handling
fsi: scom: Remove retries in indirect scoms
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
pps: clients: gpio: Propagate return value from pps_gpio_probe
fsi: Aspeed: Fix a potential double free
misc: alcor_pci: Fix an error handling path
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
soundwire: intel: fix wrong register name in intel_shim_wake
clk: qcom: ipq8074: fix PCI-E clock oops
dmaengine: idxd: check GENCAP config support for gencfg register
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: restore traffic class defaults after wq reset
iio: mma8452: Fix probe failing when an i2c_device_id is used
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel
pinctrl: renesas: checker: Fix miscalculation of number of states
clk: qcom: ipq8074: Use floor ops for SDCC1 clock
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})
phy: phy-brcm-usb: fixup BCM4908 support
serial: 8250_mid: Balance reference count for PCI DMA device
serial: 8250_lpss: Balance reference count for PCI DMA device
NFS: Use of mapping_set_error() results in spurious errors
serial: 8250: Fix race condition in RTS-after-send handling
iio: adc: Add check for devm_request_threaded_irq
habanalabs: Add check for pci_enable_device
NFS: Return valid errors from nfs2/3_decode_dirent()
staging: r8188eu: fix endless loop in recv_func
dma-debug: fix return value of __setup handlers
clk: imx7d: Remove audio_mclk_root_clk
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()
clk: at91: sama7g5: fix parents of PDMCs' GCLK
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
clk: qcom: clk-rcg2: Update the frac table for pixel clock
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
nvdimm/region: Fix default alignment for small regions
clk: actions: Terminate clk_div_table with sentinel element
clk: loongson1: Terminate clk_div_table with sentinel element
clk: hisilicon: Terminate clk_div_table with sentinel element
clk: clps711x: Terminate clk_div_table with sentinel element
clk: Fix clk_hw_get_clk() when dev is NULL
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
mailbox: imx: fix crash in resume on i.mx8ulp
NFS: remove unneeded check in decode_devicenotify_args()
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree
staging: mt7621-dts: fix formatting
staging: mt7621-dts: fix pinctrl properties for ethernet
staging: mt7621-dts: fix GB-PC2 devicetree
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()
pinctrl: mediatek: paris: Fix pingroup pin config state readback
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs
pinctrl: microchip sgpio: use reset driver
pinctrl: microchip-sgpio: lock RMW access
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
tty: hvc: fix return value of __setup handler
kgdboc: fix return value of __setup handler
serial: 8250: fix XOFF/XON sending when DMA is used
virt: acrn: obtain pa from VMA with PFNMAP flag
virt: acrn: fix a memory leak in acrn_dev_ioctl()
kgdbts: fix return value of __setup handler
firmware: google: Properly state IOMEM dependency
driver core: dd: fix return value of __setup handler
jfs: fix divide error in dbNextAG
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
SUNRPC don't resend a task on an offlined transport
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
kdb: Fix the putarea helper function
perf stat: Fix forked applications enablement of counters
clk: qcom: gcc-msm8994: Fix gpll4 width
vsock/virtio: initialize vdev->priv before using VQs
vsock/virtio: read the negotiated features before using VQs
vsock/virtio: enable VQs early on probe
clk: Initialize orphan req_rate
xen: fix is_xen_pmu()
net: enetc: report software timestamping via SO_TIMESTAMPING
net: hns3: fix bug when PF set the duplicate MAC address for VFs
net: hns3: fix port base vlan add fail when concurrent with reset
net: hns3: add vlan list lock to protect vlan list
net: hns3: format the output of the MAC address
net: hns3: refine the process when PF set VF VLAN
net: phy: broadcom: Fix brcm_fet_config_init()
selftests: test_vxlan_under_vrf: Fix broken test case
NFS: Don't loop forever in nfs_do_recoalesce()
net: hns3: clean residual vf config after disable sriov
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
qlcnic: dcb: default to returning -EOPNOTSUPP
net/x25: Fix null-ptr-deref caused by x25_disconnect
net: sparx5: switchdev: fix possible NULL pointer dereference
octeontx2-af: initialize action variable
net: prefer nf_ct_put instead of nf_conntrack_put
net/sched: act_ct: fix ref leak when switching zones
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
fs: fd tables have to be multiples of BITS_PER_LONG
lib/test: use after free in register_test_dev_kmod()
fs: fix fd table size alignment properly
LSM: general protection fault in legacy_parse_param
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos
gcc-plugins/stackleak: Exactly match strings instead of prefixes
pinctrl: npcm: Fix broken references to chip->parent_device
rcu: Mark writes to the rcu_segcblist structure's ->flags field
block/bfq_wf2q: correct weight to ioprio
crypto: xts - Add softdep on ecb
crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3
block, bfq: don't move oom_bfqq
selinux: use correct type for context length
arm64: module: remove (NOLOAD) from linker script
selinux: allow FIOCLEX and FIONCLEX with policy capability
loop: use sysfs_emit() in the sysfs xxx show()
Fix incorrect type in assignment of ipv6 port for audit
irqchip/qcom-pdc: Fix broken locking
irqchip/nvic: Release nvic_base upon failure
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
bfq: fix use-after-free in bfq_dispatch_request
ACPICA: Avoid walking the ACPI Namespace if it is not there
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
Revert "Revert "block, bfq: honor already-setup queue merges""
ACPI/APEI: Limit printable size of BERT table data
PM: core: keep irq flags in device_pm_check_callbacks()
parisc: Fix handling off probe non-access faults
nvme-tcp: lockdep: annotate in-kernel sockets
spi: tegra20: Use of_device_get_match_data()
atomics: Fix atomic64_{read_acquire,set_release} fallbacks
locking/lockdep: Iterate lock_classes directly when reading lockdep files
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
ext4: don't BUG if someone dirty pages without asking ext4 first
f2fs: fix to do sanity check on curseg->alloc_type
NFSD: Fix nfsd_breaker_owns_lease() return values
f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs
btrfs: harden identification of a stale device
btrfs: make search_csum_tree return 0 if we get -EFBIG
f2fs: use spin_lock to avoid hang
f2fs: compress: fix to print raw data size in error path of lz4 decompression
Adjust cifssb maximum read size
ntfs: add sanity check on allocation size
media: staging: media: zoran: move videodev alloc
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
media: staging: media: zoran: fix various V4L2 compliance errors
media: atmel: atmel-isc-base: report frame sizes as full supported range
media: ir_toy: free before error exiting
ASoC: sh: rz-ssi: Make the data structures available before registering the handlers
ASoC: SOF: Intel: match sdw version on link_slaves_found
media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers
media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has
media: iommu/mediatek: Return ENODEV if the device is NULL
media: iommu/mediatek: Add device_link between the consumer and the larb devices
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
video: fbdev: w100fb: Reset global state
video: fbdev: cirrusfb: check pixclock to avoid divide by zero
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ASoC: madera: Add dependencies on MFD
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo
ARM: ftrace: avoid redundant loads or clobbering IP
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
arm64: defconfig: build imx-sdma as a module
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ASoC: soc-core: skip zero num_dai component in searching dai name
media: imx-jpeg: fix a bug of accessing array out of bounds
media: cx88-mpeg: clear interrupt status register before streaming video
uaccess: fix type mismatch warnings from access_ok()
lib/test_lockup: fix kernel pointer check for separate address spaces
ARM: tegra: tamonten: Fix I2C3 pad setting
ARM: mmp: Fix failure to remove sram device
ASoC: amd: vg: fix for pm resume callback sequence
video: fbdev: sm712fb: Fix crash in smtcfb_write()
media: i2c: ov5648: Fix lockdep error
media: Revert "media: em28xx: add missing em28xx_close_extension"
media: hdpvr: initialize dev->worker at hdpvr_register_videodev
ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13"
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
mmc: host: Return an error when ->enable_sdio_irq() ops is missing
media: atomisp: fix bad usage at error handling logic
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
KVM: x86: Reinitialize context if host userspace toggles EFER.LME
KVM: x86/mmu: Move "invalid" check out of kvm_tdp_mmu_get_root()
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_send_ipi()
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_flush_tlb()
KVM: x86: hyper-v: Fix the maximum number of sparse banks for XMM fast TLB flush hypercalls
KVM: x86: hyper-v: HVCALL_SEND_IPI_EX is an XMM fast hypercall
powerpc/kasan: Fix early region not updated correctly
powerpc/lib/sstep: Fix 'sthcx' instruction
powerpc/lib/sstep: Fix build errors with newer binutils
powerpc: Add set_memory_{p/np}() and remove set_memory_attr()
powerpc: Fix build errors with newer binutils
drm/dp: Fix off-by-one in register cache size
drm/i915: Treat SAGV block time 0 as SAGV disabled
drm/i915: Fix PSF GV point mask when SAGV is not possible
drm/i915: Reject unsupported TMDS rates on ICL+
scsi: qla2xxx: Refactor asynchronous command initialization
scsi: qla2xxx: Implement ref count for SRB
scsi: qla2xxx: Fix stuck session in gpdb
scsi: qla2xxx: Fix warning message due to adisc being flushed
scsi: qla2xxx: Fix scheduling while atomic
scsi: qla2xxx: Fix premature hw access after PCI error
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter
scsi: qla2xxx: Fix warning for missing error code
scsi: qla2xxx: Fix device reconnect in loop topology
scsi: qla2xxx: edif: Fix clang warning
scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
scsi: qla2xxx: Add devids and conditionals for 28xx
scsi: qla2xxx: Check for firmware dump already collected
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
scsi: qla2xxx: Fix disk failure to rediscover
scsi: qla2xxx: Fix incorrect reporting of task management failure
scsi: qla2xxx: Fix hang due to session stuck
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests
scsi: qla2xxx: Fix N2N inconsistent PLOGI
scsi: qla2xxx: Fix stuck session of PRLI reject
scsi: qla2xxx: Reduce false trigger to login
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
platform: chrome: Split trace include file
KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irq
KVM: x86: Avoid theoretical NULL pointer dereference in kvm_irq_delivery_to_apic_fast()
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
KVM: Prevent module exit until all VMs are freed
KVM: x86: fix sending PV IPI
KVM: SVM: fix panic on out-of-bounds guest IRQ
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
ubifs: Rename whiteout atomically
ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work
ubifs: Rectify space amount budget for mkdir/tmpfile operations
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
ubifs: Fix to add refcount once page is set private
ubifs: rename_whiteout: correct old_dir size computing
nvme: allow duplicate NSIDs for private namespaces
nvme: fix the read-only state for zoned namespaces with unsupposed features
wireguard: queueing: use CFI-safe ptr_ring cleanup function
wireguard: socket: free skb in send6 when ipv6 is disabled
wireguard: socket: ignore v6 endpoints when ipv6 is disabled
XArray: Fix xas_create_range() when multi-order entry present
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
can: mcba_usb: properly check endpoint type
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
XArray: Update the LRU list in xas_split()
modpost: restore the warning message for missing symbol versions
rtc: check if __rtc_read_time was successful
gfs2: gfs2_setattr_size error path fix
gfs2: Make sure FITRIM minlen is rounded up to fs block size
net: hns3: fix the concurrency between functions reading debugfs
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
mailbox: imx: fix wakeup failure from freeze mode
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
watch_queue: Free the page array when watch_queue is dismantled
pinctrl: pinconf-generic: Print arguments for bias-pull-*
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
net: sparx5: uses, depends on BRIDGE or !BRIDGE
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
ARM: iop32x: offset IRQ numbers by 1
block: Fix the maximum minor value is blk_alloc_ext_minor()
io_uring: fix memory leak of uid in files registration
riscv module: remove (NOLOAD)
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
vhost: handle error while adding split ranges to iotlb
spi: Fix Tegra QSPI example
platform/chrome: cros_ec_typec: Check for EC device
can: isotp: restore accidentally removed MSG_PEEK feature
proc: bootconfig: Add null pointer check
drm/connector: Fix typo in documentation
scsi: qla2xxx: Add qla2x00_async_done() for async routines
staging: mt7621-dts: fix pinctrl-0 items to be size-1 items on ethernet
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
ASoC: soc-compress: Change the check for codec_dai
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
tracing: Have type enum modifications copy the strings
net: add skb_set_end_offset() helper
net: preserve skb_end_offset() in skb_unclone_keeptruesize()
mm/mmap: return 1 from stack_guard_gap __setup() handler
ARM: 9187/1: JIVE: fix return value of __setup handler
mm/memcontrol: return 1 from cgroup.memory __setup() handler
mm/usercopy: return 1 from hardened_usercopy __setup() handler
af_unix: Support POLLPRI for OOB.
bpf: Adjust BPF stack helper functions to accommodate skip > 0
bpf: Fix comment for helper bpf_current_task_under_cgroup()
mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM
dt-bindings: mtd: nand-controller: Fix the reg property description
dt-bindings: mtd: nand-controller: Fix a comment in the examples
dt-bindings: spi: mxic: The interrupt property is not mandatory
dt-bindings: memory: mtk-smi: No need mediatek,larb-id for mt8167
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Fix example
ubi: fastmap: Return error code if memory allocation fails in add_aeb()
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ASoC: topology: Allow TLV control to be either read or write
perf vendor events: Update metrics for SkyLake Server
media: ov6650: Add try support to selection API operations
media: ov6650: Fix crop rectangle affected by set format
spi: mediatek: support tick_delay without enhance_timing
ARM: dts: spear1340: Update serial node properties
ARM: dts: spear13xx: Update SPI dma properties
arm64: dts: ls1043a: Update i2c dma properties
arm64: dts: ls1046a: Update i2c node dma properties
um: Fix uml_mconsole stop/go
docs: sysctl/kernel: add missing bit to panic_print
openvswitch: Fixed nd target mask field in the flow dump.
torture: Make torture.sh help message match reality
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
mmc: rtsx: Let MMC core handle runtime PM
mmc: rtsx: Fix build errors/warnings for unused variable
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
iommu/dma: Skip extra sync during unmap w/swiotlb
iommu/dma: Fold _swiotlb helpers into callers
iommu/dma: Check CONFIG_SWIOTLB more broadly
swiotlb: Support aligned swiotlb buffers
iommu/dma: Account for min_align_mask w/swiotlb
coredump: Snapshot the vmas in do_coredump
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump/elf: Pass coredump_params into fill_note_info
coredump: Use the vma snapshot in fill_files_note
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
Linux 5.15.33
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id62bd8a22d0bfa7c2096539d253ffce804bed017
|
||
|
|
d2c741290f |
sched/uclamp: Fix iowait boost escaping uclamp restriction
[ Upstream commit d37aee9018e68b0d356195caefbb651910e0bbfa ]
iowait_boost signal is applied independently of util and doesn't take
into account uclamp settings of the rq. An io heavy task that is capped
by uclamp_max could still request higher frequency because
sugov_iowait_apply() doesn't clamp the boost via uclamp_rq_util_with()
like effective_cpu_util() does.
Make sure that iowait_boost honours uclamp requests by calling
uclamp_rq_util_with() when applying the boost.
Fixes:
|
||
|
|
bc2f6edebd |
Merge 9e9fb7655e ("Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next") into android-mainline
Steps on the way to 5.15-rc1 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I49577d606b2710975407eae3fee60bc331397810 |
||
|
|
e5c6b312ce |
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : debug_print_object+0xb8/0x100
lr : debug_print_object+0xb8/0x100
sp : ffff80001ecaf910
x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
Call trace:
debug_print_object+0xb8/0x100
__debug_check_no_obj_freed+0x1c0/0x230
debug_check_no_obj_freed+0x20/0x88
slab_free_freelist_hook+0x154/0x1c8
kfree+0x114/0x5d0
sugov_exit+0xbc/0xc0
cpufreq_exit_governor+0x44/0x90
cpufreq_set_policy+0x268/0x4a8
store_scaling_governor+0xe0/0x128
store+0xc0/0xf0
sysfs_kf_write+0x54/0x80
kernfs_fop_write_iter+0x128/0x1c0
new_sync_write+0xf0/0x190
vfs_write+0x2d4/0x478
ksys_write+0x74/0x100
__arm64_sys_write+0x24/0x30
invoke_syscall.constprop.0+0x54/0xe0
do_el0_svc+0x64/0x158
el0_svc+0x2c/0xb0
el0t_64_sync_handler+0xb0/0xb8
el0t_64_sync+0x198/0x19c
irq event stamp: 5518
hardirqs last enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
softirqs last enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8
So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely.
Fixes:
|
||
|
|
7889eed917 |
Merge 54a728dc5e ("Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") into android-mainline
A little step towards 5.14-rc1 Signed-off-by: Lee Jones <lee.jones@linaro.org> Change-Id: I2573a6df9f4e7b67194327ac6db6082a574d2809 |
||
|
|
8f1b971b47 |
sched/cpufreq: Consider reduced CPU capacity in energy calculation
Energy Aware Scheduling (EAS) needs to predict the decisions made by SchedUtil. The map_util_freq() exists to do that. There are corner cases where the max allowed frequency might be reduced (due to thermal). SchedUtil as a CPUFreq governor, is aware of that but EAS is not. This patch aims to address it. SchedUtil stores the maximum allowed frequency in 'sugov_policy::next_freq' field. EAS has to predict that value, which is the real used frequency. That value is made after a call to cpufreq_driver_resolve_freq() which clamps to the CPUFreq policy limits. In the existing code EAS is not able to predict that real frequency. This leads to energy estimation errors. To avoid wrong energy estimation in EAS (due to frequency miss prediction) make sure that the step which calculates Performance Domain frequency, is also aware of the allowed CPU capacity. Furthermore, modify map_util_freq() to not extend the frequency value. Instead, use map_util_perf() to extend the util value in both places: SchedUtil and EAS, but for EAS clamp it to max allowed CPU capacity. In the end, we achieve the same desirable behavior for both subsystems and alignment in regards to the real CPU frequency. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> (For the schedutil part) Link: https://lore.kernel.org/r/20210614191238.23224-1-lukasz.luba@arm.com |
||
|
|
4797acfb9c |
Merge 16b3d0cf5b Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into android-mainline
A little step en route to v5.13-rc1 Signed-off-by: Lee Jones <lee.jones@linaro.org> Change-Id: Ic2fb8aa220023572c96907aebce0a675333ef29f |
||
|
|
7561514944 |
Merge commit e7c6e405e1 ("Fix misc new gcc warnings") into android-mainline
Steps on the way to 5.13-rc1 Signed-off-by: Lee Jones <lee.jones@linaro.org> Change-Id: Iff6fb6b3991943905d20a8b40e2b2dd87c0d792b |
||
|
|
16b3d0cf5b |
Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
|
||
|
|
3b03706fa6 |
sched: Fix various typos
Fix ~42 single-word typos in scheduler code comments. We have accumulated a few fun ones over the years. :-) Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: linux-kernel@vger.kernel.org |
||
|
|
389e4ecf5f |
cpufreq: schedutil: Call sugov_update_next_freq() before check to fast_switch_enabled
Note that sugov_update_next_freq() may return false, that means the
caller sugov_fast_switch() will do nothing except fast switch check.
Similarly, sugov_deferred_update() also has unnecessary operations
of raw_spin_{lock,unlock} in sugov_update_single_freq() for that case.
So, let's call sugov_update_next_freq() before the fast switch check
to avoid unnecessary behaviors above. Accordingly, update interface
definition to sugov_deferred_update() and remove sugov_fast_switch()
since we will call cpufreq_driver_fast_switch() directly instead.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
|
9339700536 |
Merge 143983e585 ("Merge tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine") into android-mainline
Steps on the way to 5.12-rc1 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I4d84f16706dd17117ac3b9d81e6e55cabd48c866 |
||
|
|
1e5781383b |
Merge 657bd90c93 ("Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") into android-mainline
Steps on the way to 5.12-rc1
Resolves conflicts in:
kernel/sched/cpufreq_schedutil.c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I06d90f919467f3e7e8970aaedbb872a10eb699ff
|
||
|
|
005d3bd9e3 |
Merge tag 'pm-5.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are fixes and cleanups on top of the power management material
for 5.12-rc1 merged previously.
Specifics:
- Address cpufreq regression introduced in 5.11 that causes CPU
frequency reporting to be distorted on systems with CPPC that use
acpi-cpufreq as the scaling driver (Rafael Wysocki).
- Fix regression introduced during the 5.10 development cycle related
to CPU hotplug and policy recreation in the qcom-cpufreq-hw driver
(Shawn Guo).
- Fix recent regression in the operating performance points (OPP)
framework that may cause frequency updates to be skipped by mistake
in some cases (Jonathan Marek).
- Simplify schedutil governor code and remove a misleading comment
from it (Yue Hu).
- Fix kerneldoc comment typo in the cpufreq core (Yue Hu)"
* tag 'pm-5.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix typo in kerneldoc comment
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
opp: Don't skip freq update for different frequency
|
||
|
|
e209cb51bf |
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
Currently, update_lock is also used in sugov_update_single_freq(). The comment is not helpful anymore. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
71f1309f4f |
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
Since sg_policy is a member of struct sugov_cpu. Also remove the local variable in sugov_update_single_common() to make the code more clean. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Minor subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
a2d89d4f3a |
ANDROID: schedutil: add vendor hook for adjusting util to freq calculation
Currently, the frequency is calculated by max freq * 1.25 * util / max cap. Add a vendor hook to adjust the frequency when the calculation overestimate. android_vh_map_util_freq adjust util to freq calculation Bug: 177845439 Signed-off-by: Yun Hsiang <yun.hsiang@mediatek.com> Change-Id: I9aa9079f00af7d3380b19f2fe21b75cddd107d15 (cherry picked from commit 3122e3ec9672036384304fdeaa1b1815f60ba817) |
||
|
|
a5418be9df |
sched/core: Rename schedutil_cpu_util() and allow rest of the kernel to use it
There is nothing schedutil specific in schedutil_cpu_util(), rename it to effective_cpu_util(). Also create and expose another wrapper sched_cpu_util() which can be used by other parts of the kernel, like thermal core (that will be done in a later commit). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/db011961fb3bb8bef1c0eda5cd64564637d3ef31.1607400596.git.viresh.kumar@linaro.org |
||
|
|
7d6a905f3d |
sched/core: Move schedutil_cpu_util() to core.c
There is nothing schedutil specific in schedutil_cpu_util(), move it to core.c and define it only for CONFIG_SMP. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/c921a362c78e1324f8ebc5aaa12f53e309c5a8a2.1607400596.git.viresh.kumar@linaro.org |
||
|
|
e9fe33ae59 |
Merge 4960821a4d ("Merge tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm") into android-mainline
Steps on the way to 5.11-rc1 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I22f323c85b2805610388515ac0ddca2ad0bea637 |
||
|
|
c3a74f8e25 |
Merge branch 'pm-cpufreq'
* pm-cpufreq: cpufreq: intel_pstate: Use most recent guaranteed performance values cpufreq: intel_pstate: Implement the ->adjust_perf() callback cpufreq: Add special-purpose fast-switching callback for drivers cpufreq: schedutil: Add util to struct sg_cpu cppc_cpufreq: replace per-cpu data array with a list cppc_cpufreq: expose information on frequency domains cppc_cpufreq: clarify support for coordination types cppc_cpufreq: use policy->cpu as driver of frequency setting ACPI: processor: fix NONE coordination for domain mapping failure ACPI: processor: Drop duplicate setting of shared_cpu_map |
||
|
|
bcf67c66f7 |
Merge b4ec805464 ("Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm") into android-mainline
Steps on the way to 5.11-rc1. Fixes merge issues in: kernel/sched/cpufreq_schedutil.c Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I1e3ee238f6a6e43898a8aac206bec5738518606f |
||
|
|
b4ec805464 |
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
|
||
|
|
ee2cc4276b |
cpufreq: Add special-purpose fast-switching callback for drivers
First off, some cpufreq drivers (eg. intel_pstate) can pass hints beyond the current target frequency to the hardware and there are no provisions for doing that in the cpufreq framework. In particular, today the driver has to assume that it should not allow the frequency to fall below the one requested by the governor (or the required capacity may not be provided) which may not be the case and which may lead to excessive energy usage in some scenarios. Second, the hints passed by these drivers to the hardware need not be in terms of the frequency, so representing the utilization numbers coming from the scheduler as frequency before passing them to those drivers is not really useful. Address the two points above by adding a special-purpose replacement for the ->fast_switch callback, called ->adjust_perf, allowing the governor to pass abstract performance level (rather than frequency) values for the minimum (required) and target (desired) performance along with the CPU capacity to compare them to. Also update the schedutil governor to use the new callback instead of ->fast_switch if present and if the utilization mertics are frequency-invariant (that is requisite for the direct mapping between the utilization and the CPU performance levels to be a reasonable approximation). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
ca6827de4b |
cpufreq: schedutil: Add util to struct sg_cpu
Instead of passing util and max between functions while computing the utilization and capacity, store the former in struct sg_cpu (along with the latter and bw_dl). This will allow the current utilization value to be compared with the one obtained previously (which is requisite for some code changes to follow this one), but also it causes the code to look slightly more consistent and cleaner. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
90ac908a41 |
cpufreq: schedutil: Simplify sugov_update_next_freq()
Rearrange a conditional to make it more straightforward. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
658c60b75a |
ANDROID: sched: Export symbols for vendor EAS wakup path function
It needs to export some symbols so that vendor module could reference. Bug: 170507310 Signed-off-by: Rick Yiu <rickyiu@google.com> Change-Id: I1b3c3ea8d0a11c01a1ca9e124e93f85e52856dc4 (cherry picked from commit a61271a41a2c2825a51bd7655fc446e16d23f5f6) Signed-off-by: Will McVicker <willmcvicker@google.com> |
||
|
|
846bf8e8cb |
ANDROID: sched: Add vendor hooks for skipping sugov update
This is to add capability for vendor to decide whether a cpufreq update is needed, e.g. up/down rate limit. Using restricted hook since it can be called from scheduler wakeup path. Bug: 170511085 Signed-off-by: Wei Wang <wvw@google.com> Change-Id: If9adea3a3e31efbf3858fbd009665a07dc70c638 (cherry picked from commit f9f3464532a045257f8138338b1beda86ef0a3be) Signed-off-by: Will McVicker <willmcvicker@google.com> |
||
|
|
06881e01b5 |
ANDROID: sched: Add vendor hooks for override sugov behavior
Upstream moved the sugov to DEADLINE class which has higher prio than RT so it can potentially block many RT use case in Android. Also currently iowait doesn't distinguish background/foreground tasks and we have seen cases where device run to high frequency unnecessarily when running some background I/O. Bug: 171598214 Signed-off-by: Wei Wang <wvw@google.com> Change-Id: I21e9bfe9ef75a4178279574389e417c3f38e65ac (cherry picked from commit 03177ef82bd942a3f163e826063491bae6ff0ac9) Signed-off-by: Will McVicker <willmcvicker@google.com> |
||
|
|
a787bdaff8 |
Merge branch 'linus' into sched/core, to resolve semantic conflict
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
|
31f6a8c0a4 |
sched/topology,schedutil: Wrap sched domains rebuild
Add the rebuild_sched_domains_energy() function to wrap the functionality that rebuilds the scheduling domains if any of the Energy Aware Scheduling (EAS) initialisation conditions change. This functionality is used when schedutil is added or removed or when EAS is enabled or disabled through the sched_energy_aware sysctl. Therefore, create a single function that is used in both these cases and that can be later reused. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Quentin Perret <qperret@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20201027180713.7642-2-ionela.voinescu@arm.com |
||
|
|
3428a2f782 |
Merge 585e5b17b9 ("Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt") into android-mainline
Steps on the way to 5.10-rc4 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I8554ba37704bee02192ff6117d4909fde568fca2 |
||
|
|
9a2a9ebc0a |
cpufreq: Introduce governor flags
A new cpufreq governor flag will be added subsequently, so replace the bool dynamic_switching fleid in struct cpufreq_governor with a flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for the "dynamic switching" governors instead of it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
3d5e271d10 |
Merge 521b619acd ("Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest") into android-mainline
Steps on the way to 5.10-rc3 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I57f80255bf5d396e92a54807a516cc41cf07be61 |
||
|
|
23a881852f |
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
The cpufreq policy's frequency limits (min/max) can get changed at any point of time, while schedutil is trying to update the next frequency. Though the schedutil governor has necessary locking and support in place to make sure we don't miss any of those updates, there is a corner case where the governor will find that the CPU is already running at the desired frequency and so may skip an update. For example, consider that the CPU can run at 1 GHz, 1.2 GHz and 1.4 GHz and is running at 1 GHz currently. Schedutil tries to update the frequency to 1.2 GHz, during this time the policy limits get changed as policy->min = 1.4 GHz. As schedutil (and cpufreq core) does clamp the frequency at various instances, we will eventually set the frequency to 1.4 GHz, while we will save 1.2 GHz in sg_policy->next_freq. Now lets say the policy limits get changed back at this time with policy->min as 1 GHz. The next time schedutil is invoked by the scheduler, we will reevaluate the next frequency (because need_freq_update will get set due to limits change event) and lets say we want to set the frequency to 1.2 GHz again. At this point sugov_update_next_freq() will find the next_freq == current_freq and will abort the update, while the CPU actually runs at 1.4 GHz. Until now need_freq_update was used as a flag to indicate that the policy's frequency limits have changed, and that we should consider the new limits while reevaluating the next frequency. This patch fixes the above mentioned issue by extending the purpose of the need_freq_update flag. If this flag is set now, the schedutil governor will not try to abort a frequency change even if next_freq == current_freq. As similar behavior is required in the case of CPUFREQ_NEED_UPDATE_LIMITS flag as well, need_freq_update will never be set to false if that flag is set for the driver. We also don't need to consider the need_freq_update flag in sugov_update_single() anymore to handle the special case of busy CPU, as we won't abort a frequency update anymore. Reported-by: zhuguangqing <zhuguangqing@xiaomi.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rearrange code to avoid a branch ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
c13605829f |
Merge 65b55d4c85 ("Merge tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") into android-mainline
Steps on the way to 5.10-rc2 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I2aae8375aa349bd63596d4bd29e50e36993c764f |
||
|
|
d1e7c2996e |
cpufreq: schedutil: Always call driver if CPUFREQ_NEED_UPDATE_LIMITS is set
Because sugov_update_next_freq() may skip a frequency update even if the need_freq_update flag has been set for the policy at hand, policy limits updates may not take effect as expected. For example, if the intel_pstate driver operates in the passive mode with HWP enabled, it needs to update the HWP min and max limits when the policy min and max limits change, respectively, but that may not happen if the target frequency does not change along with the limit at hand. In particular, if the policy min is changed first, causing the target frequency to be adjusted to it, and the policy max limit is changed later to the same value, the HWP max limit will not be updated to follow it as expected, because the target frequency is still equal to the policy min limit and it will not change until that limit is updated. To address this issue, modify get_next_freq() to let the driver callback run if the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag is set regardless of whether or not the new frequency to set is equal to the previous one. Fixes: |
||
|
|
79c83f152b |
Merge 1f70935f63 ("Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") into android-mainline
Steps on the way to 5.10-rc1 Resolves conflicts in: Documentation/admin-guide/sysctl/vm.rst Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Ic58f28718f28dae42948c935dfb0c62122fe86fc |
||
|
|
37afce95bb |
Merge 79db2b74aa ("Merge branch 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb") into android-mainline
Resolves merge issues with: drivers/cpufreq/cpufreq.c Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Ic2907cf71867dab7b8e1b5fcbd4c888fc01f8c22 |
||
|
|
0070ea2962 |
cpufreq: schedutil: restore cached freq when next_f is not changed
We have the raw cached freq to reduce the chance in calling cpufreq driver where it could be costly in some arch/SoC. Currently, the raw cached freq is reset in sugov_update_single() when it avoids frequency reduction (which is not desirable sometimes), but it is better to restore the previous value of it in that case, because it may not change in the next cycle and it is not necessary to change the CPU frequency then. Adapted from https://android-review.googlesource.com/1352810/ Signed-off-by: Wei Wang <wvw@google.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject edit and changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
86836bac55 |
cpufreq: schedutil: Simplify sugov_fast_switch()
Drop a redundant local variable definition from sugov_fast_switch() and rearrange the code in there to avoid the redundant logical negation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
|
08d8c65e84 |
cpufreq: Move traces and update to policy->cur to cpufreq core
The cpufreq core handles the updates to policy->cur and recording of cpufreq trace events for all the governors except schedutil's fast switch case. Move that as well to cpufreq core for consistency and readability. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
075d0ec13d |
Merge c0842fbc1b ("random32: move the pseudo-random 32-bit definitions to prandom.h") into android-mainline
Baby steps on the way to 5.9-rc1. Resolves merge issues with: arch/arm64/boot/dts/qcom/sdm845-db845c.dts drivers/soc/qcom/Kconfig kernel/sched/cpufreq_schedutil.c Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Ieb3344a22f9cf0d55ec5fc0daebe7602a248ab53 |
||
|
|
00d6a8a7ee |
Merge e4cbce4d13 ("Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") into android-mainline
Baby steps for 5.9-rc1 Resolves some kernel/sched/ merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I88cf5411ac7251f9795d9c50cb18b0df5bf0bcd6 |
||
|
|
0408497800 |
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
|
||
|
|
46609ce227 |
sched/uclamp: Protect uclamp fast path code with static key
There is a report that when uclamp is enabled, a netperf UDP test
regresses compared to a kernel compiled without uclamp.
https://lore.kernel.org/lkml/20200529100806.GA3070@suse.de/
While investigating the root cause, there were no sign that the uclamp
code is doing anything particularly expensive but could suffer from bad
cache behavior under certain circumstances that are yet to be
understood.
https://lore.kernel.org/lkml/20200616110824.dgkkbyapn3io6wik@e107158-lin/
To reduce the pressure on the fast path anyway, add a static key that is
by default will skip executing uclamp logic in the
enqueue/dequeue_task() fast path until it's needed.
As soon as the user start using util clamp by:
1. Changing uclamp value of a task with sched_setattr()
2. Modifying the default sysctl_sched_util_clamp_{min, max}
3. Modifying the default cpu.uclamp.{min, max} value in cgroup
We flip the static key now that the user has opted to use util clamp.
Effectively re-introducing uclamp logic in the enqueue/dequeue_task()
fast path. It stays on from that point forward until the next reboot.
This should help minimize the effect of util clamp on workloads that
don't need it but still allow distros to ship their kernels with uclamp
compiled in by default.
SCHED_WARN_ON() in uclamp_rq_dec_id() was removed since now we can end
up with unbalanced call to uclamp_rq_dec_id() if we flip the key while
a task is running in the rq. Since we know it is harmless we just
quietly return if we attempt a uclamp_rq_dec_id() when
rq->uclamp[].bucket[].tasks is 0.
In schedutil, we introduce a new uclamp_is_enabled() helper which takes
the static key into account to ensure RT boosting behavior is retained.
The following results demonstrates how this helps on 2 Sockets Xeon E5
2x10-Cores system.
nouclamp uclamp uclamp-static-key
Hmean send-64 162.43 ( 0.00%) 157.84 * -2.82%* 163.39 * 0.59%*
Hmean send-128 324.71 ( 0.00%) 314.78 * -3.06%* 326.18 * 0.45%*
Hmean send-256 641.55 ( 0.00%) 628.67 * -2.01%* 648.12 * 1.02%*
Hmean send-1024 2525.28 ( 0.00%) 2448.26 * -3.05%* 2543.73 * 0.73%*
Hmean send-2048 4836.14 ( 0.00%) 4712.08 * -2.57%* 4867.69 * 0.65%*
Hmean send-3312 7540.83 ( 0.00%) 7425.45 * -1.53%* 7621.06 * 1.06%*
Hmean send-4096 9124.53 ( 0.00%) 8948.82 * -1.93%* 9276.25 * 1.66%*
Hmean send-8192 15589.67 ( 0.00%) 15486.35 * -0.66%* 15819.98 * 1.48%*
Hmean send-16384 26386.47 ( 0.00%) 25752.25 * -2.40%* 26773.74 * 1.47%*
The perf diff between nouclamp and uclamp-static-key when uclamp is
disabled in the fast path:
8.73% -1.55% [kernel.kallsyms] [k] try_to_wake_up
0.07% +0.04% [kernel.kallsyms] [k] deactivate_task
0.13% -0.02% [kernel.kallsyms] [k] activate_task
The diff between nouclamp and uclamp-static-key when uclamp is enabled
in the fast path:
8.73% -0.72% [kernel.kallsyms] [k] try_to_wake_up
0.13% +0.39% [kernel.kallsyms] [k] activate_task
0.07% +0.38% [kernel.kallsyms] [k] deactivate_task
Fixes:
|
||
|
|
10dd8573b0 |
cpufreq: Register governors at core_initcall
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
|
bdfa61448f |
ANDROID: sched: Allow EAS without schedutil
This effectively reverts
|
||
|
|
d2b58a286e |
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
The current helper returns (CPU) rq utilization with uclamp restrictions taken into account. A uclamp task utilization helper would be quite helpful, but this requires some renaming. Prepare the code for the introduction of a uclamp_task_util() by renaming the existing uclamp_util_with() to uclamp_rq_util_with(). Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Quentin Perret <qperret@google.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191211113851.24241-4-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
|
85572c2c4a |
cpufreq: Avoid leaving stale IRQ work items during CPU offline
The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.
Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.
If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point. Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever. In particular, a system-wide
deadlock may occur during CPU online as a result of that.
The failing scenario is as follows. CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu). It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline. The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above. Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3. When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.
To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.
Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.
Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.
Fixes:
|