Changes in 5.10.36
bus: mhi: core: Fix check for syserr at power_up
bus: mhi: core: Clear configuration from channel context during reset
bus: mhi: core: Sanity check values from remote device before use
nitro_enclaves: Fix stale file descriptors on failed usercopy
dyndbg: fix parsing file query without a line-range suffix
s390/disassembler: increase ebpf disasm buffer size
s390/zcrypt: fix zcard and zqueue hot-unplug memleak
vhost-vdpa: fix vm_flags for virtqueue doorbell mapping
tpm: acpi: Check eventlog signature before using it
ACPI: custom_method: fix potential use-after-free issue
ACPI: custom_method: fix a possible memory leak
ftrace: Handle commands when closing set_ftrace_filter file
ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lld
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
arm64: dts: mt8173: fix property typo of 'phys' in dsi node
ecryptfs: fix kernel panic with null dev_name
fs/epoll: restore waking from ep_done_scan()
mtd: spi-nor: core: Fix an issue of releasing resources during read/write
Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
mtd: spinand: core: add missing MODULE_DEVICE_TABLE()
mtd: rawnand: atmel: Update ecc_stats.corrected counter
mtd: physmap: physmap-bt1-rom: Fix unintentional stack access
erofs: add unsupported inode i_format check
spi: stm32-qspi: fix pm_runtime usage_count counter
spi: spi-ti-qspi: Free DMA resources
scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()
scsi: mpt3sas: Block PCI config access from userspace during reset
mmc: uniphier-sd: Fix an error handling path in uniphier_sd_probe()
mmc: uniphier-sd: Fix a resource leak in the remove function
mmc: sdhci: Check for reset prior to DMA address unmap
mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based controllers
mmc: sdhci-tegra: Add required callbacks to set/clear CQE_EN bit
mmc: block: Update ext_csd.cache_ctrl if it was written
mmc: block: Issue a cache flush only when it's enabled
mmc: core: Do a power cycle when the CMD11 fails
mmc: core: Set read only for SD cards with permanent write protect bit
mmc: core: Fix hanging on I/O during system suspend for removable cards
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
cifs: Return correct error code from smb2_get_enc_key
cifs: fix out-of-bound memory access when calling smb3_notify() at mount point
cifs: detect dead connections only when echoes are enabled.
smb2: fix use-after-free in smb2_ioctl_query_info()
btrfs: handle remount to no compress during compression
x86/build: Disable HIGHMEM64G selection for M486SX
btrfs: fix metadata extent leak after failure to create subvolume
intel_th: pci: Add Rocket Lake CPU support
btrfs: fix race between transaction aborts and fsyncs leading to use-after-free
posix-timers: Preserve return value in clock_adjtime32()
fbdev: zero-fill colormap in fbcmap.c
cpuidle: tegra: Fix C7 idling state on Tegra114
bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
staging: wimax/i2400m: fix byte-order issue
spi: ath79: always call chipselect function
spi: ath79: remove spi-master setup and cleanup assignment
bus: mhi: core: Destroy SBL devices when moving to mission mode
crypto: api - check for ERR pointers in crypto_destroy_tfm()
crypto: qat - fix unmap invalid dma address
usb: gadget: uvc: add bInterval checking for HS mode
usb: webcam: Invalid size of Processing Unit Descriptor
x86/sev: Do not require Hypervisor CPUID bit for SEV guests
crypto: hisilicon/sec - fixes a printing error
genirq/matrix: Prevent allocation counter corruption
usb: gadget: f_uac2: validate input parameters
usb: gadget: f_uac1: validate input parameters
usb: dwc3: gadget: Ignore EP queue requests during bus reset
usb: xhci: Fix port minor revision
kselftest/arm64: mte: Fix compilation with native compiler
ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node
PCI: PM: Do not read power state in pci_enable_device_flags()
kselftest/arm64: mte: Fix MTE feature detection
ARM: dts: BCM5301X: fix "reg" formatting in /memory node
ARM: dts: ux500: Fix up TVK R3 sensors
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
x86/boot: Add $(CLANG_FLAGS) to compressed KBUILD_CFLAGS
efi/libstub: Add $(CLANG_FLAGS) to x86 flags
soc/tegra: pmc: Fix completion of power-gate toggling
arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
tee: optee: do not check memref size on return from Secure World
soundwire: cadence: only prepare attached devices on clock stop
perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors
perf/arm_pmu_platform: Fix error handling
random: initialize ChaCha20 constants with correct endianness
usb: xhci-mtk: support quirk to disable usb2 lpm
fpga: dfl: pci: add DID for D5005 PAC cards
xhci: check port array allocation was successful before dereferencing it
xhci: check control context is valid before dereferencing it.
xhci: fix potential array out of bounds with several interrupters
bus: mhi: core: Clear context for stopped channels from remove()
ARM: dts: at91: change the key code of the gpio key
tools/power/x86/intel-speed-select: Increase string size
platform/x86: ISST: Account for increased timeout in some cases
spi: dln2: Fix reference leak to master
spi: omap-100k: Fix reference leak to master
spi: qup: fix PM reference leak in spi_qup_remove()
usb: gadget: tegra-xudc: Fix possible use-after-free in tegra_xudc_remove()
usb: musb: fix PM reference leak in musb_irq_work()
usb: core: hub: Fix PM reference leak in usb_port_resume()
usb: dwc3: gadget: Check for disabled LPM quirk
tty: n_gsm: check error while registering tty devices
intel_th: Consistency and off-by-one fix
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
crypto: sun8i-ss - Fix PM reference leak when pm_runtime_get_sync() fails
crypto: sun8i-ce - Fix PM reference leak in sun8i_ce_probe()
crypto: stm32/hash - Fix PM reference leak on stm32-hash.c
crypto: stm32/cryp - Fix PM reference leak on stm32-cryp.c
crypto: sa2ul - Fix PM reference leak in sa_ul_probe()
crypto: omap-aes - Fix PM reference leak on omap-aes.c
platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
spi: sync up initial chipselect state
btrfs: do proper error handling in create_reloc_root
btrfs: do proper error handling in btrfs_update_reloc_root
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
drm: Added orientation quirk for OneGX1 Pro
drm/qxl: do not run release if qxl failed to init
drm/qxl: release shadow on shutdown
drm/ast: Fix invalid usage of AST_MAX_HWC_WIDTH in cursor atomic_check
drm/amd/display: changing sr exit latency
drm/ast: fix memory leak when unload the driver
drm/amd/display: Check for DSC support instead of ASIC revision
drm/amd/display: Don't optimize bandwidth before disabling planes
drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work
drm/amd/display/dc/dce/dce_aux: Remove duplicate line causing 'field overwritten' issue
scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe
scsi: lpfc: Fix pt2pt connection does not recover after LOGO
drm/amdgpu: Fix some unload driver issues
sched/pelt: Fix task util_est update filtering
kvfree_rcu: Use same set of GFP flags as does single-argument
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
media: ite-cir: check for receive overflow
media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIB
media: imx: capture: Return -EPIPE from __capture_legacy_try_fmt()
atomisp: don't let it go past pipes array
power: supply: bq27xxx: fix power_avg for newer ICs
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
extcon: arizona: Fix various races on driver unbind
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
media: gspca/sq905.c: fix uninitialized variable
power: supply: Use IRQF_ONESHOT
backlight: qcom-wled: Use sink_addr for sync toggle
backlight: qcom-wled: Fix FSC update issue for WLED5
drm/amdgpu: mask the xgmi number of hops reported from psp to kfd
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac
drm/amd/pm: fix workload mismatch on vega10
drm/amd/display: Fix UBSAN warning for not a valid value for type '_Bool'
drm/amd/display: DCHUB underflow counter increasing in some scenarios
drm/amd/display: fix dml prefetch validation
scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()
drm/vkms: fix misuse of WARN_ON
scsi: qla2xxx: Fix use after free in bsg
mmc: sdhci-esdhc-imx: validate pinctrl before use it
mmc: sdhci-pci: Add PCI IDs for Intel LKF
mmc: sdhci-brcmstb: Remove CQE quirk
ata: ahci: Disable SXS for Hisilicon Kunpeng920
drm/komeda: Fix bit check to import to value of proper type
nvmet: return proper error code from discovery ctrl
selftests/resctrl: Enable gcc checks to detect buffer overflows
selftests/resctrl: Fix compilation issues for global variables
selftests/resctrl: Fix compilation issues for other global variables
selftests/resctrl: Clean up resctrl features check
selftests/resctrl: Fix missing options "-n" and "-p"
selftests/resctrl: Use resctrl/info for feature detection
selftests/resctrl: Fix incorrect parsing of iMC counters
selftests/resctrl: Fix checking for < 0 for unsigned values
power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
scsi: smartpqi: Use host-wide tag space
scsi: smartpqi: Correct request leakage during reset operations
scsi: smartpqi: Add new PCI IDs
scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()
media: em28xx: fix memory leak
media: vivid: update EDID
drm/msm/dp: Fix incorrect NULL check kbot warnings in DP driver
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
media: tc358743: fix possible use-after-free in tc358743_remove()
media: adv7604: fix possible use-after-free in adv76xx_remove()
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove()
media: i2c: adv7842: fix possible use-after-free in adv7842_remove()
media: platform: sti: Fix runtime PM imbalance in regs_show
media: sun8i-di: Fix runtime PM imbalance in deinterlace_start_streaming
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
media: gscpa/stv06xx: fix memory leak
sched/fair: Ignore percpu threads for imbalance pulls
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
drm/msm/mdp5: Do not multiply vclk line count by 100
drm/amdgpu/ttm: Fix memory leak userptr pages
drm/radeon/ttm: Fix memory leak userptr pages
drm/amd/display: Fix debugfs link_settings entry
drm/amd/display: Fix UBSAN: shift-out-of-bounds warning
drm/amdkfd: Fix cat debugfs hang_hws file causes system crash bug
amdgpu: avoid incorrect %hu format string
drm/amd/display: Try YCbCr420 color when YCbCr444 fails
drm/amdgpu: fix NULL pointer dereference
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
scsi: lpfc: Fix error handling for mailboxes completed in MBX_POLL mode
scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic
mfd: intel-m10-bmc: Fix the register access range
mfd: da9063: Support SMBus and I2C mode
mfd: arizona: Fix rumtime PM imbalance on error
scsi: libfc: Fix a format specifier
perf: Rework perf_event_exit_event()
sched,fair: Alternative sched_slice()
block/rnbd-clt: Fix missing a memory free when unloading the module
s390/archrandom: add parameter check for s390_arch_random_generate
sched,psi: Handle potential task count underflow bugs more gracefully
power: supply: cpcap-battery: fix invalid usage of list cursor
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: usb-audio: Explicitly set up the clock selector
ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G7
ALSA: hda/realtek: GA503 use same quirks as GA401
ALSA: hda/realtek: fix mic boost on Intel NUC 8
ALSA: hda/realtek - Headset Mic issue on HP platform
ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
tools/power/turbostat: Fix turbostat for AMD Zen CPUs
btrfs: fix race when picking most recent mod log operation for an old root
arm64/vdso: Discard .note.gnu.property sections in vDSO
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
fs: fix reporting supported extra file attributes for statx()
virtiofs: fix memory leak in virtio_fs_probe()
kcsan, debugfs: Move debugfs file creation out of early init
ubifs: Only check replay with inode type to judge if inode linked
f2fs: fix error handling in f2fs_end_enable_verity()
f2fs: fix to avoid out-of-bounds memory access
mlxsw: spectrum_mr: Update egress RIF list before route's action
openvswitch: fix stack OOB read while fragmenting IPv4 packets
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
NFS: fs_context: validate UDP retrans to prevent shift out-of-bounds
NFS: Don't discard pNFS layout segments that are marked for return
NFSv4: Don't discard segments marked for return in _pnfs_return_layout()
Input: ili210x - add missing negation for touch indication on ili210x
jffs2: Fix kasan slab-out-of-bounds problem
jffs2: Hook up splice_write callback
powerpc/powernv: Enable HAIL (HV AIL) for ISA v3.1 processors
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
intel_th: pci: Add Alder Lake-M support
tpm: efi: Use local variable for calculating final log size
tpm: vtpm_proxy: Avoid reading host log when using a virtual device
crypto: arm/curve25519 - Move '.fpu' after '.arch'
crypto: rng - fix crypto_rng_reset() refcounting when !CRYPTO_STATS
md/raid1: properly indicate failure when ending a failed write request
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
fuse: fix write deadlock
exfat: fix erroneous discard when clear cluster bit
sfc: farch: fix TX queue lookup in TX flush done handling
sfc: farch: fix TX queue lookup in TX event handling
security: commoncap: fix -Wstringop-overread warning
Fix misc new gcc warnings
jffs2: check the validity of dstlen in jffs2_zlib_compress()
smb3: when mounting with multichannel include it in requested capabilities
smb3: do not attempt multichannel to server which does not support it
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
kbuild: update config_data.gz only when the content of .config is changed
ext4: annotate data race in start_this_handle()
ext4: annotate data race in jbd2_journal_dirty_metadata()
ext4: fix check to prevent false positive report of incorrect used inodes
ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
ext4: fix error code in ext4_commit_super
ext4: fix ext4_error_err save negative errno into superblock
ext4: fix error return code in ext4_fc_perform_commit()
ext4: allow the dax flag to be set and cleared on inline directories
ext4: Fix occasional generic/418 failure
media: dvbdev: Fix memory leak in dvb_media_device_free()
media: dvb-usb: Fix use-after-free access
media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()
media: staging/intel-ipu3: Fix memory leak in imu_fmt
media: staging/intel-ipu3: Fix set_fmt error handling
media: staging/intel-ipu3: Fix race condition during set_fmt
media: v4l2-ctrls: fix reference to freed memory
media: venus: hfi_parser: Don't initialize parser on v1
usb: gadget: dummy_hcd: fix gpf in gadget_setup
usb: gadget: Fix double free of device descriptor pointers
usb: gadget/function/f_fs string table fix for multiple languages
usb: dwc3: gadget: Remove FS bInterval_m1 limitation
usb: dwc3: gadget: Fix START_TRANSFER link state check
usb: dwc3: core: Do core softreset when switch mode
usb: dwc2: Fix session request interrupt handler
tty: fix memory leak in vc_deallocate
rsi: Use resume_noirq for SDIO
tools/power turbostat: Fix offset overflow issue in index converting
tracing: Map all PIDs to command lines
tracing: Restructure trace_clock_global() to never block
dm persistent data: packed struct should have an aligned() attribute too
dm space map common: fix division bug in sm_ll_find_free_block()
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
thermal/drivers/cpufreq_cooling: Fix slab OOB issue
thermal/core/fair share: Lock the thermal zone while looping over instances
Linux 5.10.36
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7b8075de5edd8de69205205cddb9a3273d7d0810
commit 84696cfaf4 upstream.
Commit 9af7706492 ("lib/vsprintf: Remove support for %pF and %pf in
favour of %pS and %ps") removed support for %pF and %pf, and correctly
removed the handling of those cases in vbin_printf(). However, the
corresponding cases in bstr_printf() were left behind.
In the same series, %pf was re-purposed for dealing with
fwnodes (3bd32d6a2e, "lib/vsprintf: Add %pfw conversion specifier
for printing fwnode names").
So should anyone use %pf with the binary printf routines,
vbin_printf() would (correctly, as it involves dereferencing the
pointer) do the string formatting to the u32 array, but bstr_printf()
would not copy the string from the u32 array, but instead interpret
the first sizeof(void*) bytes of the formatted string as a pointer -
which generally won't end well (also, all subsequent get_args would be
out of sync).
Fixes: 9af7706492 ("lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps")
Cc: stable@vger.kernel.org
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210423094529.1862521-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the no_hash_pointers command line parameter is set, then
printk("%p") will print pointers as unhashed, which is useful for
debugging purposes. This change applies to any function that uses
vsprintf, such as print_hex_dump() and seq_buf_printf().
A large warning message is displayed if this option is enabled.
Unhashed pointers expose kernel addresses, which can be a security
risk.
Also update test_printf to skip the hashed pointer tests if the
command-line option is set.
Signed-off-by: Timur Tabi <timur@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210214161348.369023-4-timur@kernel.org
(cherry picked from commit 5ead723a20)
Bug: 181049978
Change-Id: I06c5cfdc0b4c12f38c9109179f27bf2b54ac57e8
Signed-off-by: Chris Goldsworthy <cgoldswo@codeaurora.org>
No need to go through the hd_struct to find the partition number.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following build error for powerpc64 was reported by Nathan Chancellor:
"$ scripts/config --file arch/powerpc/configs/powernv_defconfig -e KERNEL_XZ
$ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
...
In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
from arch/powerpc/boot/decompress.c:38:
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
586 | fallthrough;
| ^~~~~~~~~~~
This will end up affecting distribution configurations such as Debian
and OpenSUSE according to my testing. I am not sure what the solution
is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
that compiler_attributes.h can be safely included."
In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: df561f6688 ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200702200536.13389-1-grandmaster@al2klimov.de
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9c ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
Example output with the patch applied:
ptr error-ptr NULL
%p: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%pK, kptr = 0: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%px: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 1: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 2: 0000000000000000 0000000000000000 0000000000000000
Fixes: 3e5903eb9c ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usage of plain %s conversion specifier in bpf_trace_printk() suffers from the
very same issue as bpf_probe_read{,str}() helpers, that is, it is broken on
archs with overlapping address ranges.
While the helpers have been addressed through work in 6ae08ae3de ("bpf: Add
probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers"), we need
an option for bpf_trace_printk() as well to fix it.
Similarly as with the helpers, force users to make an explicit choice by adding
%pks and %pus specifier to bpf_trace_printk() which will then pick the corresponding
strncpy_from_unsafe*() variant to perform the access under KERNEL_DS or USER_DS.
The %pk* (kernel specifier) and %pu* (user specifier) can later also be extended
for other objects aside strings that are probed and printed under tracing, and
reused out of other facilities like bpf_seq_printf() or BTF based type printing.
Existing behavior of %s for current users is still kept working for archs where it
is not broken and therefore gated through CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
For archs not having this property we fall-back to pick probing under KERNEL_DS as
a sensible default.
Fixes: 8d3b7dce86 ("bpf: add support for %s specifier to bpf_trace_printk()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Link: https://lore.kernel.org/bpf/20200515101118.6508-4-daniel@iogearbox.net
Pull device properties framework updates from Rafael Wysocki:
"Add support for printing fwnode names using a new conversion specifier
"%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus)"
* tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
software node: simplify property_entry_read_string_array()
software node: unify PROPERTY_ENTRY_XXX macros
software node: remove property_entry_read_uNN_array functions
software node: get rid of property_set_pointer()
software node: clean up property_copy_string_array()
software node: mark internal macros with double underscores
efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN
software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN()
software node: remove DEV_PROP_MAX
device property: Fix the description of struct fwnode_operations
lib/test_printf: Add tests for %pfw printk modifier
lib/vsprintf: Add %pfw conversion specifier for printing fwnode names
lib/vsprintf: OF nodes are first and foremost, struct device_nodes
lib/vsprintf: Make use of fwnode API to obtain node names and separators
lib/vsprintf: Add a note on re-using %pf or %pF
lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
device property: Add a function to obtain a node's prefix
device property: Add fwnode_get_name for returning the name of a node
device property: Add functions for accessing node's parents
device property: Move fwnode_get_parent() up
...
It has been suggested several times to extend vsnprintf() to be able
to convert the numeric value of ENOSPC to print "ENOSPC". This
implements that as a %p extension: With %pe, one can do
if (IS_ERR(foo)) {
pr_err("Sorry, can't do that: %pe\n", foo);
return PTR_ERR(foo);
}
instead of what is seen in quite a few places in the kernel:
if (IS_ERR(foo)) {
pr_err("Sorry, can't do that: %ld\n", PTR_ERR(foo));
return PTR_ERR(foo);
}
If the value passed to %pe is an ERR_PTR, but the library function
errname() added here doesn't know about the value, the value is simply
printed in decimal. If the value passed to %pe is not an ERR_PTR, we
treat it as an ordinary %p and thus print the hashed value (passing
non-ERR_PTR values to %pe indicates a bug in the caller, but we can't
do much about that).
With my embedded hat on, and because it's not very invasive to do,
I've made it possible to remove this. The errname() function and
associated lookup tables take up about 3K. For most, that's probably
quite acceptable and a price worth paying for more readable
dmesg (once this starts getting used), while for those that disable
printk() it's of very little use - I don't see a
procfs/sysfs/seq_printf() file reasonably making use of this - and
they clearly want to squeeze vmlinux as much as possible. Hence the
default y if PRINTK.
The symbols to include have been found by massaging the output of
find arch include -iname 'errno*.h' | xargs grep -E 'define\s*E'
In the cases where some common aliasing exists
(e.g. EAGAIN=EWOULDBLOCK on all platforms, EDEADLOCK=EDEADLK on most),
I've moved the more popular one (in terms of 'git grep -w Efoo | wc)
to the bottom so that one takes precedence.
Link: http://lkml.kernel.org/r/20191015190706.15989-1-linux@rasmusvillemoes.dk
To: "Jonathan Corbet" <corbet@lwn.net>
To: linux-kernel@vger.kernel.org
Cc: "Andy Shevchenko" <andy.shevchenko@gmail.com>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: "Joe Perches" <joe@perches.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[andy.shevchenko@gmail.com: use abs()]
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add support for %pfw conversion specifier (with "f" and "P" modifiers) to
support printing full path of the node, including its name ("f") and only
the node's name ("P") in the printk family of functions. The two flags
have equivalent functionality to existing %pOF with the same two modifiers
("f" and "P") on OF based systems. The ability to do the same on ACPI
based systems is added by this patch.
On ACPI based systems the resulting strings look like
\_SB.PCI0.CIO2.port@1.endpoint@0
where the nodes are separated by a dot (".") and the first three are
ACPI device nodes and the latter two ACPI data nodes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of implementing our own means of discovering parent nodes, node
names or counting how many parents a node has, use the newly added
functions in the fwnode API to obtain that information.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
%pS and %ps are now the preferred conversion specifiers to print function
names. The functionality is equivalent; remove the old, deprecated %pF
and %pf support.
Depends-on: commit 2d44d165e9 ("scsi: lpfc: Convert existing %pf users to %ps")
Depends-on: commit b295c3e39c ("tools lib traceevent: Convert remaining %p[fF] users to %p[sS]")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull printk updates from Petr Mladek:
- distinguish different legacy clocks again
- small clean up
* tag 'printk-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Reinstate printing of legacy clock IDs
vsprintf: fix data type of variable in string_nocheck()
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 3e5903eb9c ("vsprintf: Prevent crash when dereferencing
invalid pointers") broke boot on several architectures. The common
pattern is that probe_kernel_read() is not working during early
boot because userspace access framework is not ready.
It is a generic problem. We have to avoid any complex external
functions in vsprintf() code, especially in the common path.
They might break printk() easily and are hard to debug.
Replace probe_kernel_read() with some simple checks for obvious
problems.
Details:
1. Report on Power:
Kernel crashes very early during boot with with CONFIG_PPC_KUAP and
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
The problem is the combination of some new code called via printk(),
check_pointer() which calls probe_kernel_read(). That then calls
allow_user_access() (PPC_KUAP) and that uses mmu_has_feature() too early
(before we've patched features). With the JUMP_LABEL debug enabled that
causes us to call printk() & dump_stack() and we end up recursing and
overflowing the stack.
Because it happens so early you don't get any output, just an apparently
dead system.
The stack trace (which you don't see) is something like:
...
dump_stack+0xdc
probe_kernel_read+0x1a4
check_pointer+0x58
string+0x3c
vsnprintf+0x1bc
vscnprintf+0x20
printk_safe_log_store+0x7c
printk+0x40
dump_stack_print_info+0xbc
dump_stack+0x8
probe_kernel_read+0x1a4
probe_kernel_read+0x19c
check_pointer+0x58
string+0x3c
vsnprintf+0x1bc
vscnprintf+0x20
vprintk_store+0x6c
vprintk_emit+0xec
vprintk_func+0xd4
printk+0x40
cpufeatures_process_feature+0xc8
scan_cpufeatures_subnodes+0x380
of_scan_flat_dt_subnodes+0xb4
dt_cpu_ftrs_scan_callback+0x158
of_scan_flat_dt+0xf0
dt_cpu_ftrs_scan+0x3c
early_init_devtree+0x360
early_setup+0x9c
2. Report on s390:
vsnprintf invocations, are broken on s390. For example, the early boot
output now looks like this where the first (efault) should be
the linux_banner:
[ 0.099985] (efault)
[ 0.099985] setup: Linux is running as a z/VM guest operating system in 64-bit mode
[ 0.100066] setup: The maximum memory size is 8192MB
[ 0.100070] cma: Reserved 4 MiB at (efault)
[ 0.100100] numa: NUMA mode: (efault)
The reason for this, is that the code assumes that
probe_kernel_address() works very early. This however is not true on
at least s390. Uaccess on KERNEL_DS works only after page tables have
been setup on s390, which happens with setup_arch()->paging_init().
Any probe_kernel_address() invocation before that will return -EFAULT.
Fixes: 3e5903eb9c ("vsprintf: Prevent crash when dereferencing invalid pointers")
Link: http://lkml.kernel.org/r/20190510084213.22149-1-pmladek@suse.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Russell Currey <ruscur@russell.cc>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Stephen Rothwell <sfr@ozlabs.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
We already prevent crash when dereferencing some obviously broken
pointers. But the handling is not consistent. Sometimes we print "(null)"
only for pure NULL pointer, sometimes for pointers in the first
page and sometimes also for pointers in the last page (error codes).
Note that printk() call this code under logbuf_lock. Any recursive
printks are redirected to the printk_safe implementation and the messages
are stored into per-CPU buffers. These buffers might be eventually flushed
in printk_safe_flush_on_panic() but it is not guaranteed.
This patch adds a check using probe_kernel_read(). It is not a full-proof
test. But it should help to see the error message in 99% situations where
the kernel would silently crash otherwise.
Also it makes the error handling unified for "%s" and the many %p*
specifiers that need to read the data from a given address. We print:
+ (null) when accessing data on pure pure NULL address
+ (efault) when accessing data on an invalid address
It does not affect the %p* specifiers that just print the given address
in some form, namely %pF, %pf, %pS, %ps, %pB, %pK, %px, and plain %p.
Note that we print (efault) from security reasons. In fact, the real
address can be seen only by %px or eventually %pK.
Link: http://lkml.kernel.org/r/20190417115350.20479-9-pmladek@suse.com
To: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There are few printk formats that make sense only with two or more
specifiers. Also some specifiers make sense only when a kernel feature
is enabled.
The handling of unknown specifiers is inconsistent and not helpful.
Using WARN() looks like an overkill for this type of error. pr_warn()
is not good either. It would by handled via printk_safe buffer and
it might be hard to match it with the problematic string.
A reasonable compromise seems to be writing the unknown format specifier
into the original string with a question mark, for example (%pC?).
It should be self-explaining enough. Note that it is in brackets
to follow the (null) style.
Note that it introduces a warning about that test_hashed() function
is unused. It is going to be used again by a later patch.
Link: http://lkml.kernel.org/r/20190417115350.20479-8-pmladek@suse.com
To: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull printk updates from Petr Mladek:
- Allow to sort mixed lines by an extra information about the caller
- Remove no longer used LOG_PREFIX.
- Some clean up and documentation update.
* tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk/docs: Add extra integer types to printk-formats
printk: Remove no longer used LOG_PREFIX.
lib/vsprintf: Remove %pCr remnant in comment
printk: Pass caller information to log_store().
printk: Add caller information to printk() output.
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
Pull printk updates from Petr Mladek:
- Fix two more locations where printf formatting leaked pointers
- Better log_buf_len parameter handling
- Add prefix to messages from printk code
- Do not miss messages on other consoles when the log is replayed on a
new one
- Reduce race between console registration and panic() when the log
might get replayed on all consoles
- Some cont buffer code clean up
- Call console only when there is something to do (log vs cont buffer)
* tag 'printk-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Hash printed address for netdev bits fallback
lib/vsprintf: Hash legacy clock addresses
lib/vsprintf: Prepare for more general use of ptr_to_id()
lib/vsprintf: Make ptr argument conts in ptr_to_id()
printk: fix integer overflow in setup_log_buf()
printk: do not preliminary split up cont buffer
printk: lock/unlock console only for new logbuf entries
printk: keep kernel cont support always enabled
printk: Give error on attempt to set log buffer length to over 2G
printk: Add KBUILD_MODNAME and remove a redundant print prefix
printk: Correct wrong casting
printk: Fix panic caused by passing log_buf_len to command line
printk: CON_PRINTBUFFER console registration is a bit racy
printk: Do not miss new messages when replaying the log
Pull documentation updates from Jonathan Corbet:
"This is a fairly typical cycle for documentation. There's some welcome
readability improvements for the formatted output, some LICENSES
updates including the addition of the ISC license, the removal of the
unloved and unmaintained 00-INDEX files, the deprecated APIs document
from Kees, more MM docs from Mike Rapoport, and the usual pile of typo
fixes and corrections"
* tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits)
docs: Fix typos in histogram.rst
docs: Introduce deprecated APIs list
kernel-doc: fix declaration type determination
doc: fix a typo in adding-syscalls.rst
docs/admin-guide: memory-hotplug: remove table of contents
doc: printk-formats: Remove bogus kobject references for device nodes
Documentation: preempt-locking: Use better example
dm flakey: Document "error_writes" feature
docs/completion.txt: Fix a couple of punctuation nits
LICENSES: Add ISC license text
LICENSES: Add note to CDDL-1.0 license that it should not be used
docs/core-api: memory-hotplug: add some details about locking internals
docs/core-api: rename memory-hotplug-notifier to memory-hotplug
docs: improve readability for people with poorer eyesight
yama: clarify ptrace_scope=2 in Yama documentation
docs/vm: split memory hotplug notifier description to Documentation/core-api
docs: move memory hotplug description into admin-guide/mm
doc: Fix acronym "FEKEK" in ecryptfs
docs: fix some broken documentation references
iommu: Fix passthrough option documentation
...
When converting from text to rst, the kobjects section and its sole
subsection about device tree nodes were coalesced into a single section,
yielding an inconsistent result.
Remove all references to kobjects, as
1. Device tree object pointers are not compatible to kobject pointers
(the former may embed the latter, though), and
2. there are no printk formats defined for kobject types.
Update the vsprintf() source code comments to match the above.
Fixes: b3ed23213e ("doc: convert printk-formats.txt to rst")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
