The request->timeline is only valid until the request is retired (i.e.
before it is completed). Upon retiring the request, the context may be
unpinned and freed, and along with it the timeline may be freed. We
therefore need to be very careful when chasing rq->timeline that the
pointer does not disappear beneath us. The vast majority of users are in
a protected context, either during request construction or retirement,
where the timeline->mutex is held and the timeline cannot disappear. It
is those few off the beaten path (where we access a second timeline) that
need extra scrutiny -- to be added in the next patch after first adding
the warnings about dangerous access.
One complication, where we cannot use the timeline->mutex itself, is
during request submission onto hardware (under spinlocks). Here, we want
to check on the timeline to finalize the breadcrumb, and so we need to
impose a second rule to ensure that the request->timeline is indeed
valid. As we are submitting the request, it's context and timeline must
be pinned, as it will be used by the hardware. Since it is pinned, we
know the request->timeline must still be valid, and we cannot submit the
idle barrier until after we release the engine->active.lock, ergo while
submitting and holding that spinlock, a second thread cannot release the
timeline.
v2: Don't be lazy inside selftests; hold the timeline->mutex for as long
as we need it, and tidy up acquiring the timeline with a bit of
refactoring (i915_active_add_request)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-1-chris@chris-wilson.co.uk
If we only call process_csb() from the tasklet, though we lose the
ability to bypass ksoftirqd interrupt processing on direct submission
paths, we can push it out of the irq-off spinlock.
The penalty is that we then allow schedule_out to be called concurrently
with schedule_in requiring us to handle the usage count (baked into the
pointer itself) atomically.
As we do kick the tasklets (via local_bh_enable()) after our submission,
there is a possibility there to see if we can pull the local softirq
processing back from the ksoftirqd.
v2: Store the 'switch_priority_hint' on submission, so that we can
safely check during process_csb().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816171608.11760-1-chris@chris-wilson.co.uk
During engine setup, we may find that some engines are fused off causing
a misalignment between internal names and the instances seen by users,
e.g. (I915_ENGINE_CLASS_VIDEO_DECODE, 1) may be vcs2 in hardware.
Normally this is invisible to the user, but a few debug interfaces (and
our own internal tracing) use the original HW name not the name the user
would expect as formed from their class:instance tuple. Replace our
internal name with the uabi name for consistency with, for example, error
states.
v2: Keep the pretty printing of class name in the selftest
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111311
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807110431.8130-1-chris@chris-wilson.co.uk
A couple issues were present in this code:
1.
fls() usage was incorrect causing off by one in subslice mask lookup,
which in other words means subslice mask of all zeroes is always used
(subslice mask of a slice which is not present, or even out of bounds
array access), rendering the checks in wa_init_mcr either futile or
random.
2.
Condition in WARN_ON was not correct. It is doing a bitwise and operation
between a positive (present subslices) and negative mask (disabled L3
banks).
This means that with corrected fls() usage the assert would always
incorrectly fail.
We could fix this by inverting the fuse bits in the check, but instead do
one better and improve the code so it not only asserts, but finds the
first common index between the two masks and only warns if no such index
can be found.
v2:
* Simplify check for logic and redability.
* Improve commentary explaining what is really happening ie. what the
assert is really trying to check and why.
v3:
* Find first common index instead of just asserting.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: fe864b76c2 ("drm/i915: Implement WaProgramMgsrForL3BankSpecificMmioReads")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-4-tvrtko.ursulin@linux.intel.com
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
To continue the onslaught of removing the assumption of a global
execution ordering, another casualty is the engine->timeline. Without an
actual timeline to track, it is overkill and we can replace it with a
much less grand plain list. We still need a list of requests inflight,
for the simple purpose of finding inflight requests (for retiring,
resetting, preemption etc).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk
We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.
The sequence of operations for keeping the context pinned until saved is:
- On context activation, we preallocate a node for each physical engine
the context may operate on. This is to avoid allocations during
unpinning, which may be from inside FS_RECLAIM context (aka the
shrinker)
- On context deactivation on retirement of the last active request (which
is before we know the context has been saved), we add the
preallocated node onto a barrier list on each engine
- On engine idling, we emit a switch to kernel context. When this
switch completes, we know that all previous contexts must have been
saved, and so on retiring this request we can finally unpin all the
contexts that were marked as deactivated prior to the switch.
We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.
v2: intel_context_active_acquire/_release
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: fix spacing in set_sseu_info args
use set_sseu_info to initialize sseu data when building
device status in debugfs
rename variables in intel_engine_types.h to avoid checkpatch
warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
return the correct subslice enable in for_each_instdone
add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
use printk formatted string for subslice mask
v7: remove string.h header and rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
Engine discovery query allows userspace to enumerate engines, probe their
configuration features, all without needing to maintain the internal PCI
ID based database.
A new query for the generic i915 query ioctl is added named
DRM_I915_QUERY_ENGINE_INFO, together with accompanying structure
drm_i915_query_engine_info. The address of latter should be passed to the
kernel in the query.data_ptr field, and should be large enough for the
kernel to fill out all known engines as struct drm_i915_engine_info
elements trailing the query.
As with other queries, setting the item query length to zero allows
userspace to query minimum required buffer size.
Enumerated engines have common type mask which can be used to query all
hardware engines, versus engines userspace can submit to using the execbuf
uAPI.
Engines also have capabilities which are per engine class namespace of
bits describing features not present on all engine instances.
v2:
* Fixed HEVC assignment.
* Reorder some fields, rename type to flags, increase width. (Lionel)
* No need to allocate temporary storage if we do it engine by engine.
(Lionel)
v3:
* Describe engine flags and mark mbz fields. (Lionel)
* HEVC only applies to VCS.
v4:
* Squash SFC flag into main patch.
* Tidy some comments.
v5:
* Add uabi_ prefix to engine capabilities. (Chris Wilson)
* Report exact size of engine info array. (Chris Wilson)
* Drop the engine flags. (Joonas Lahtinen)
* Added some more reserved fields.
* Move flags after class/instance.
v6:
* Do not check engine info array was zeroed by userspace but zero the
unused fields for them instead.
v7:
* Simplify length calculation loop. (Lionel Landwerlin)
v8:
* Remove MBZ comments where not applicable.
* Rename ABI flags to match engine class define naming.
* Rename SFC ABI flag to reflect it applies to VCS and VECS.
* SFC is wired to even _logical_ engine instances.
* SFC applies to VCS and VECS.
* HEVC is present on all instances on Gen11. (Tony)
* Simplify length calculation even more. (Chris Wilson)
* Move info_ptr assigment closer to loop for clarity. (Chris Wilson)
* Use vdbox_sfc_access from runtime info.
* Rebase for RUNTIME_INFO.
* Refactor for lower indentation.
* Rename uAPI class/instance to engine_class/instance to avoid C++
keyword.
v9:
* Rebase for s/num_rings/num_engines/ in RUNTIME_INFO.
v10:
* Use new copy_query_item.
v11:
* Consolidate with struct i915_engine_class_instnace.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # v7
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522090054.6007-1-tvrtko.ursulin@linux.intel.com
