commit 1af7fef0d9d3fa075bf4e850f705df1fe97d33ce upstream.
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae0fa0a3126a86c801c3220fcd8eefe03aa39f3e upstream.
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dc485f9940df8105ea729cbeb7a7d18d409dde5 upstream.
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a152d05ae4a71d802d50cf9177dba34e8bb09f68 upstream.
If smb311 posix is enabled, we send the intended mode for file
creation in the posix create context. Instead of using what's there on
the stack, create the mfsymlink file with 0644.
Fixes: ce558b0e17 ("smb3: Add posix create context for smb3.11 posix mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f8770c71646cf93abdf3fea8b7733aaec4c82a3 upstream.
Do it when parsing like in other actions instead of when
checking if goto is supported in current scenario.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3f360db08d55a14112bd27454e616a24296a8b0 upstream.
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82d3edb50a11bf3c5ef63294d5358ba230181413 upstream.
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
For example:
/* Reset trailer (using compare-double-and-swap) */
do {
te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
te_flags |= SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
te->flags, te->overflow,
te_flags, 0ULL));
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 000bca8d706d1bf7cca01af75787247c5a2fdedf upstream.
These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.
This fixes commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.
Fixes: 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2337a40e04dde1692b5b0a46ecc59f89aaba8a1 upstream.
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf129830ee820f7fc90b98df193cd49d49344d09 upstream.
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0283189e8f3d0917e2ac399688df85211f48447b upstream.
Sphinx 6.0 removed the execfile_() function, which we use as part of the
configuration process. They *did* warn us... Just open-code the
functionality as is done in Sphinx itself.
Tested (using SPHINX_CONF, since this code is only executed with an
alternative config file) on various Sphinx versions from 2.5 through 6.0.
Reported-by: Martin Liška <mliska@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3f450533bbcb6dd4d7d59cadc9b61b7321e4ac1 upstream.
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
Cc: <stable@vger.kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1782
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 561cafebb2cf97b0927b4fb0eba22de6200f682e upstream.
The following warning appears when executing:
make -C tools/testing/selftests/kvm
rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
(void *)(unsigned long)gettid());
^~~~~~
getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1
Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 406504c7b0405d74d74c15a667cd4c4620c3e7a9 upstream.
A recent development on the EFI front has resulted in guests having
their page tables baked in the firmware binary, and mapped into the
IPA space as part of a read-only memslot. Not only is this legitimate,
but it also results in added security, so thumbs up.
It is possible to take an S1PTW translation fault if the S1 PTs are
unmapped at stage-2. However, KVM unconditionally treats S1PTW as a
write to correctly handle hardware AF/DB updates to the S1 PTs.
Furthermore, KVM injects an exception into the guest for S1PTW writes.
In the aforementioned case this results in the guest taking an abort
it won't recover from, as the S1 PTs mapping the vectors suffer from
the same problem.
So clearly our handling is... wrong.
Instead, switch to a two-pronged approach:
- On S1PTW translation fault, handle the fault as a read
- On S1PTW permission fault, handle the fault as a write
This is of no consequence to SW that *writes* to its PTs (the write
will trigger a non-S1PTW fault), and SW that uses RO PTs will not
use HW-assisted AF/DB anyway, as that'd be wrong.
Only in the case described in c4ad98e4b7 ("KVM: arm64: Assume write
fault on S1PTW permission fault on instruction fetch") do we end-up
with two back-to-back faults (page being evicted and faulted back).
I don't think this is a case worth optimising for.
Fixes: c4ad98e4b7 ("KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Regression-tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 696e1a48b1a1b01edad542a1ef293665864a4dd0 upstream.
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.
Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Fixes: f6ae9f120d ("netfilter: nft_payload: add C-VLAN support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56b88b50565cd8b946a2d00b0c83927b7ebb055e upstream.
Takes rwsem lock inside snd_ctl_elem_read instead of snd_ctl_elem_read_user
like it was done for write in commit 1fa4445f9a ("ALSA: control - introduce
snd_ctl_notify_one() helper"). Doing this way we are also fixing the following
locking issue happening in the compat path which can be easily triggered and
turned into an use-after-free.
64-bits:
snd_ctl_ioctl
snd_ctl_elem_read_user
[takes controls_rwsem]
snd_ctl_elem_read [lock properly held, all good]
[drops controls_rwsem]
32-bits:
snd_ctl_ioctl_compat
snd_ctl_elem_write_read_compat
ctl_elem_write_read
snd_ctl_elem_read [missing lock, not good]
CVE-2023-0266 was assigned for this issue.
Cc: stable@kernel.org # 5.13+
Signed-off-by: Clement Lecigne <clecigne@google.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230113120745.25464-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c02d41d71f90a5168391b6a5f2954112ba2307c upstream.
When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().
The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.
Other ULPs may end-up with a double-free at socket disposal time.
We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.
Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.
Fixes: 734942cc4e ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96398560f26aa07e8f2969d73c8197e6a6d10407 upstream.
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
# dev=enp0s5
# tc qdisc replace dev $dev root handle 1: htb default 1
# tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit
# tc qdisc add dev $dev parent 1:1 handle 10: noqueue
# ping -I $dev -w 1 -c 1 1.1.1.1
[ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2.173217] #PF: supervisor instruction fetch in kernel mode
...
[ 2.178451] Call Trace:
[ 2.178577] <TASK>
[ 2.178686] htb_enqueue+0x1c8/0x370
[ 2.178880] dev_qdisc_enqueue+0x15/0x90
[ 2.179093] __dev_queue_xmit+0x798/0xd00
[ 2.179305] ? _raw_write_lock_bh+0xe/0x30
[ 2.179522] ? __local_bh_enable_ip+0x32/0x70
[ 2.179759] ? ___neigh_create+0x610/0x840
[ 2.179968] ? eth_header+0x21/0xc0
[ 2.180144] ip_finish_output2+0x15e/0x4f0
[ 2.180348] ? dst_output+0x30/0x30
[ 2.180525] ip_push_pending_frames+0x9d/0xb0
[ 2.180739] raw_sendmsg+0x601/0xcb0
[ 2.180916] ? _raw_spin_trylock+0xe/0x50
[ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30
[ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0
[ 2.181594] ? sock_sendmsg+0x56/0x60
[ 2.181781] sock_sendmsg+0x56/0x60
[ 2.181958] __sys_sendto+0xf7/0x160
[ 2.182139] ? handle_mm_fault+0x6e/0x1d0
[ 2.182366] ? do_user_addr_fault+0x1e1/0x660
[ 2.182627] __x64_sys_sendto+0x1b/0x30
[ 2.182881] do_syscall_64+0x38/0x90
[ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[ 2.187402] </TASK>
Previously in commit d66d6c3152 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt
Fixes: d66d6c3152 ("net: sched: register noqueue qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in
driver-specific way") got backported to 5.15.y, there known as
b079d37752, some hunks were accidentally left out.
In fsl_lpuart.c, this amounts to uart_remove_one_port() being called
in an error path despite uart_add_one_port() not having been called.
In serial_core.c, it is possible that the omission in
uart_suspend_port() is harmless, but the backport did have the
corresponding hunk in uart_resume_port(), it runs counter to the
original commit's intention of
Skip any invocation of ->set_mctrl() if RS485 is enabled.
and it's certainly better to be aligned with upstream.
Fixes: b079d37752 ("serial: Deassert Transmit Enable on probe in driver-specific way")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7e5aceace514a2b1b3ca3dc44f93f1704766ca7 upstream
The hardware XRSTOR instruction resets the PKRU register to its hardware
init value (namely 0) if the PKRU bit is not set in the xfeatures mask.
Emulating that here restores the pre-5.14 behavior for PTRACE_SET_REGSET
with NT_X86_XSTATE, and makes sigreturn (which still uses XRSTOR) and
behave identically.
Fixes: e84ba47e31 ("x86/fpu: Hook up PKRU into ptrace()")
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-6-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a804c4f8356393d6b5eff7600f07615d7869c13 upstream
Handle PKRU in copy_uabi_to_xstate() for the benefit of APIs that write
the XSTATE such as PTRACE_SETREGSET with NT_X86_XSTATE.
This restores the pre-5.14 behavior of ptrace. The regression can be seen
by running gdb and executing `p $pkru`, `set $pkru = 42`, and `p $pkru`.
On affected kernels (5.14+) the write to the PKRU register (which gdb
performs through ptrace) is ignored.
Fixes: e84ba47e31 ("x86/fpu: Hook up PKRU into ptrace()")
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-5-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c87767c35ee9744f666ccec869d5fe742c3de0a upstream
In preparation for adding PKRU handling code into copy_uabi_to_xstate(),
add an argument that copy_uabi_from_kernel_to_xstate() can use to pass the
canonical location of the PKRU value. For
copy_sigframe_from_user_to_xstate() the kernel will actually restore the
PKRU value from the fpstate, but pass in the thread_struct's pkru location
anyways for consistency.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-4-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71bdea6f798b425bc0003780b13e3fdecb16a010 upstream.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b389286d0234e1edbaf62ed8bc0892a568c33662 upstream.
For G200_SE_A, PLL M setting is wrong, which leads to blank screen,
or "signal out of range" on VGA display.
previous code had "m |= 0x80" which was changed to
m |= ((pixpllcn & BIT(8)) >> 1);
Tested on G200_SE_A rev 42
This line of code was moved to another file with
commit 877507bb954e ("drm/mgag200: Provide per-device callbacks for
PIXPLLC") but can be easily backported before this commit.
v2: * put BIT(7) First to respect MSB-to-LSB (Thomas)
* Add a comment to explain that this bit must be set (Thomas)
Fixes: 2dd040946e ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013132810.521945-1-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch warning: io_fixup_rw_res() warn:
unsigned 'res' is never less than zero.
Change type of 'res' from unsigned to long.
Fixes: d6b7efc722 ("io_uring/rw: fix error'ed retry return values")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 196dff2712ca5a2e651977bb2fe6b05474111a83 upstream.
Instead of blindly creating the EFI random seed configuration table if
the RNG protocol is implemented and works, check whether such a EFI
configuration table was provided by an earlier boot stage and if so,
concatenate the existing and the new seeds, leaving it up to the core
code to mix it in and credit it the way it sees fit.
This can be used for, e.g., systemd-boot, to pass an additional seed to
Linux in a way that can be consumed by the kernel very early. In that
case, the following definitions should be used to pass the seed to the
EFI stub:
struct linux_efi_random_seed {
u32 size; // of the 'seed' array in bytes
u8 seed[];
};
The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY
pool memory, and the address of the struct in memory should be installed
as a EFI configuration table using the following GUID:
LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b
Note that doing so is safe even on kernels that were built without this
patch applied, but the seed will simply be overwritten with a seed
derived from the EFI RNG protocol, if available. The recommended seed
size is 32 bytes, and seeds larger than 512 bytes are considered
corrupted and ignored entirely.
In order to preserve forward secrecy, seeds from previous bootloaders
are memzero'd out, and in order to preserve memory, those older seeds
are also freed from memory. Freeing from memory without first memzeroing
is not safe to do, as it's possible that nothing else will ever
overwrite those pages used by EFI.
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: incorporate Jason's followup changes to extend the maximum seed
size on the consumer end, memzero() it and drop a needless printk]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fc4cbd9fde5d4630494fd6ffc884148fb618087 upstream.
Commit 307af6c87937 ("mbcache: automatically delete entries from cache
on freeing") started nesting cache->c_list_lock under the bit locks
protecting hash buckets of the mbcache hash table in
mb_cache_entry_create(). This causes problems for real-time kernels
because there spinlocks are sleeping locks while bitlocks stay atomic.
Luckily the nesting is easy to avoid by holding entry reference until
the entry is added to the LRU list. This makes sure we cannot race with
entry deletion.
Cc: stable@kernel.org
Fixes: 307af6c87937 ("mbcache: automatically delete entries from cache on freeing")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29df7c695ed67a8fa32bb7805bad8fe2a76c1f88 upstream.
The refactoring of rx copybreak modifies the original return logic, which
will make this feature unavailable. So this patch fixes the return logic of
rx copybreak.
Fixes: e74a726da2c4 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d17adea74a56a4965f7a603d8ed8c66bb9356d9 upstream.
Previous commit a05d3c915314 ("btrfs: check superblock to ensure the fs
was not modified at thaw time") only checks the content of the super
block, but it doesn't really check if the on-disk super block has a
matching checksum.
This patch will add the checksum verification to thaw time superblock
verification.
This involves the following extra changes:
- Export btrfs_check_super_csum()
As we need to call it in super.c.
- Change the argument list of btrfs_check_super_csum()
Instead of passing a char *, directly pass struct btrfs_super_block *
pointer.
- Verify that our checksum type didn't change before checking the
checksum value, like it's done at mount time
Fixes: a05d3c915314 ("btrfs: check superblock to ensure the fs was not modified at thaw time")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ad51ab618de5d05f4e692ebabeb6fe6289aaa57 upstream.
The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa'
gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test
/usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 105c78e12468413e426625831faa7db4284e1fec upstream.
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
A reproducer is:
mkfs.ext4 -F /dev/vdb
debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808"
mount /dev/vdb /mnt -o inlinecrypt
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature.
Reported-by: syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com
Fixes: 38ea50daa7a4 ("ext4: support direct I/O with fscrypt using blk-crypto")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3295fee3c756ece33ac0d935e172e68c0a4161b upstream.
Before, only the destructor from TCP request sock in IPv4 was called
even if the subflow was IPv6.
It is important to use the right destructor to avoid memory leaks with
some advanced IPv6 features, e.g. when the request socks contain
specific IPv6 options.
Fixes: 79c0949e9a ("mptcp: Add key generation and token tree")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34b21d1ddc8ace77a8fa35c1b1e06377209e0dae upstream.
tcp_request_sock_ops structure is specific to IPv4. It should then not
be used with MPTCP subflows on top of IPv6.
For example, it contains the 'family' field, initialised to AF_INET.
This 'family' field is used by TCP FastOpen code to generate the cookie
but also by TCP Metrics, SELinux and SYN Cookies. Using the wrong family
will not lead to crashes but displaying/using/checking wrong things.
Note that 'send_reset' callback from request_sock_ops structure is used
in some error paths. It is then also important to use the correct one
for IPv4 or IPv6.
The slab name can also be different in IPv4 and IPv6, it will be used
when printing some log messages. The slab pointer will anyway be the
same because the object size is the same for both v4 and v6. A
BUILD_BUG_ON() has also been added to make sure this size is the same.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of AMD based Rembrandt laptops are not working properly in
suspend/resume. This has been root caused to be from the BIOS
implementation not populating code for the AMD GUID in uPEP, but
instead only the Microsoft one.
In later kernels this has been fixed by using the Microsoft GUID
instead.
The following series of patches has fixed it in newer kernels:
commit ed470febf837 ("ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008")
commit 1a2dcab517cb ("ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset")
commit 100a57379380 ("ACPI: x86: s2idle: Move _HID handling for AMD systems into structures")
commit fd894f05cf30 ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
commit a0bc002393d4 ("ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID")
commit d0f61e89f08d ("ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE")
commit ddeea2c3cb88 ("ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14")
commit 888ca9c7955e ("ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7")
commit 631b54519e8e ("ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13")
commit 39f81776c680 ("ACPI: x86: s2idle: Fix a NULL pointer dereference")
commit 54bd1e548701 ("ACPI: x86: s2idle: Add another ID to s2idle_dmi_table")
commit 577821f756cf ("ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865")
commit e6d180a35bc0 ("ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+")
This is needlessly complex for 5.15.y though. To accomplish the same
effective result revert commit f0c6225531 ("ACPI: PM: Add support for
upcoming AMD uPEP HID AMDI007") instead.
Link: https://lore.kernel.org/stable/MN0PR12MB61015DB3D6EDBFD841157918E2F59@MN0PR12MB6101.namprd12.prod.outlook.com/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 797805d81baa814f76cf7bdab35f86408a79d707 upstream.
"nt_len - CIFS_ENCPWD_SIZE" is passed directly from
ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests
can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative
number (or large unsigned value) used for a subsequent memcpy in
ksmbd_auth_ntlvm2 and can cause a panic.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Hrvoje Mišetić <misetichrvoje@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83dcedd5540d4ac61376ddff5362f7d9f866a6ec upstream.
If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round
again, It will cause infinite loop issue. And all threads from next
connections would be doing that. This patch add max retry count(2) to
avoid it. kernel_recvmsg() will wait during 7sec timeout and try to
retry two time if -EAGAIN is returned. And add flags of kvmalloc to
__GFP_NOWARN and __GFP_NORETRY to disconnect immediately without
retrying on memory alloation failure.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
