Pull pin control updates from Linus Walleij:
"This is the big bulk of pin control changes for the v4.13 series:
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output buffers
without actually enabling input and/or output on a pin. We are
chiseling out some details of pin control electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
to use this pin controller and consolidate earlier spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control. All
users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for RK3228,
RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes"
* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
pinctrl: rza1: Remove unneeded wrong check for wrong variable
pinctrl: qcom: Add ipq8074 pinctrl driver
pinctrl: freescale: imx7d: make of_device_ids const.
pinctrl: DT: extend the pinmux property to support integers array
pinctrl: generic: Add output-enable property
pinctrl: armada-37xx: Fix number of pin in sdio_sb
pinctrl: armada-37xx: Fix uart2 group selection register mask
pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
pinctrl: sh-pfc: r8a7795: Add PWM support
MAINTAINERS: Add Qualcomm pinctrl drivers section
arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
dt-bindings: pinctrl: Add RZ/A1 bindings doc
pinctrl: Renesas RZ/A1 pin and gpio controller
pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
pinctrl.txt: move it to the driver-api book
pinctrl: ingenic: checking for NULL instead of IS_ERR()
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
...
A wide variety of TI platforms support NAND via the
CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this.
In addition, multi_v7_defconfig supports the dm8168-evm and that
supports root being on a SATA drive, so build the DM816 AHCI driver into
the resulting kernel as well.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Qualcomm ARM Based defconfig Updates for v4.13 - Part 2" from Andy Gross:
* Enable RPMSG_QCOM_SMD to get boards working again
* tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
As of commit 5052de8def, QCOM_SMD_RPM and various other config
options enabled in the qcom_defconfig depends on the RPMSG. If
QCOM_SMD_RPM config option is not selected it disables the
REGULATOR_QCOM_SMD_RPM and other essential config options.
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Pull "ARM defconfig cleanup" from Krzysztof Kozłowski:
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
* tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: tct_hammer_defconfig: Save defconfig
ARM: s5pv210_defconfig: Save defconfig
ARM: s3c6400_defconfig: Save defconfig
ARM: mini2440_defconfig: Save defconfig
ARM: s3c2410_defconfig: Save defconfig
ARM: exynos_defconfig: Save defconfig
ARM: s5pv210_defconfig: Bring back lost (but wanted) options
ARM: s3c6400_defconfig: Bring back lost (but wanted) options
ARM: s3c2410_defconfig: Bring back lost (but wanted) options
ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
ARM: mini2440_defconfig: Bring back lost (but wanted) options
ARM: defconfig: samsung: Re-order entries to match savedefconfig
ARM: defconfig: Cleanup from old Kconfig options
The i.MX defconfig updates for 4.13:
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
* tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: mxs_defconfig: Re-enable MXS LRADC
ARM: mxs_defconfig: Enable CONFIG_CGROUPS
ARM: imx_v6_v7_defconfig: Enable cpufreq governors
Signed-off-by: Olof Johansson <olof@lixom.net>
mvebu defconfig for 4.13
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
* tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
defconfig for 4.13:
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
* tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: configs: at91: add MCAN driver to sama5_defconfig
ARM: configs: at91: enable HIGH_RES_TIMERS
ARM: configs: at91: make system tickless when idle
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM Based defconfig Updates for v4.13
* Enable IPQ4019 clock and pinctrl
* tag 'qcom-defconfig-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: Enable IPQ4019 clock and pinctrl
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable mtdtests and USB NCM gadget in DaVinci kernel
(as modules).
* tag 'davinci-for-v4.13/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable USB CDC NCM gadget
ARM: davinci_all_defconfig: enable mtdtests
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.13,
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
* tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung defconfig ARM update for v4.13:
1. Enable Exynos PRNG along with user-space crypto API.
* tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API
Signed-off-by: Olof Johansson <olof@lixom.net>
Re-sync of davinci_all_defconfig with savedefconfig and enable
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
* tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable CPPI 4.1 USB OTG DMA
ARM: davinci_all_defconfig: enable USB audio/video device support
ARM: davinci_all_defconfig: cleanup with savedefconfig
ARM: davinci_all_defconfig: enable LEGO MINDSTORMS EV3 battery module
Signed-off-by: Olof Johansson <olof@lixom.net>
Select CONFIG_IMX7D_ADC so that the i.MX7 ADC driver can be
built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mtdtests module has some useful tests to verify that
mtd drivers like davinci_nand are working correctly.
Enable it in davinci_all_defconfig to make testing and
debug easier.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Setting trip points is supported by the imx thermal driver and it is
useful to be able to test this without adjusting config.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to use the serial and ethernet USB gadget support on
Raspberry Zero, we also need to enable the PHY driver, kernel module
and OTG support.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Generate new defconfig to get rid of obsolete Kconfig entries:
- BUGVERBOSE was changed into DEBUG_BUGVERBOSE and will be enabled by
default (it is useful);
- DETECT_SOFTLOCKUP was changed into LOCKUP_DETECTOR;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_LOWLEVEL_UART_PORT and S3C_DEV_FB are invalid for S5P;
- S5PV210_SETUP_FB_24BPP is gone;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_BOOT_ERROR_RESET, SND_S3C24XX_SOC and SND_SOC_SMDK_WM9713 are
gone;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- NET_ETHERNET, SND_S3C24XX_SOC are gone;
- CRYPTO_FIPS is changed to no (cannot be part of module);
- BINFMT_AOUT cannot be selected anymore;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_BOOT_ERROR_RESET, SMDK2440_CPU2442 are gone;
- ARM_THUMB is changed to yes (selected by default);
- BINFMT_AOUT cannot be selected anymore;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- RFKILL_REGULATOR is gone;
- COMMON_CLK_MAX77802 was merged into COMMON_CLK_MAX77686;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- DEBUG_SPINLOCK_SLEEP was replaced by DEBUG_ATOMIC_SLEEP;
- Use proper DEBUG_S3C_UART1 for UART1;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- PWM is now needed for BACKLIGHT_PWM;
- DEBUG_SPINLOCK_SLEEP was replaced by DEBUG_ATOMIC_SLEEP;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- IP_NF_TARGET_LOG was replaced by NETFILTER_XT_TARGET_LOG;
- NF_NAT was replaced by IP_NF_NAT;
- SERIAL_DEV_BUS is now needed for BT_HCIUART_LL;
- TPS65010 is now needed for MACH_OSIRIS_DVS;
- DMADEVICES and S3C24XX_DMAC are now needed for MMC_S3C;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- USB_GADGET_S3C2410 was replaced by USB_S3C2410;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SERIAL_DEV_BUS is now needed for BT_HCIUART_LL;
- USB_GADGET_S3C2410 was replaced by USB_S3C2410;
- S3C24XX_DMAC is now needed for MMC_S3C;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Re-order entries just like savedefconfig would do so it will be easier
to review the changes before actual savedefconfig.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
These configs are required for booting kernel in QCOM IPQ4019 boards.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This option was removed by "make savedefconfig" in
commit c5054a98bc ("ARM: imx_v6_v7_defconfig: Select SMSC_PHY")
This happened because CONFIG_DEBUG_FS was implicitly selected by
CONFIG_TREE_RCU_TRACE which defaulted to true because CONFIG_RCU_TRACE
was enabled by default by commit 961518259b ("rcu: Enable RCU
tracepoints by default to aid in debugging")
Recently however CONFIG_RCU_TRACE was completely removed by
commit 6e74c237c410 ("rcu: Remove debugfs tracing")
The result is that imx_v6_v7_defconfig no longer includes DEBUG_FS on
linux-next since next-20170517. This is bad, DEBUG_FS is extremely
useful for kernel introspection and testing.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CPPI 4.1 DMA is now supported on AM18xx.
Update the config to use it instead of PIO mode.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable support for USB audio and video camera devices.
Tested on OMAP-L138 LCDK using Logitech webcam and
Plantronics headset.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
davinci_all_defconfig is out of sync with savedefconfig in some places.
Regenerate the default settings by:
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device tree. It is also quick to compile and test. Hopefully this
defconfig can be a good base for distributions such as OpenWRT.
I plan to add in the config options needed for the different
variants of Gemini as we go along.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the power supply module for the LEGO MINDSTORMS EV3 battery.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The MXS LRADC driver left staging and has been split. So re-enable
the driver and remove the obsolete entries.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the Controller Area Network (MCAN) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
