Pull MIPS updates from James Hogan:
"Here's the main MIPS pull request for 4.11.
It contains a few new features such as IRQ stacks, cacheinfo support,
and KASLR for Octeon CPUs, and a variety of smaller improvements and
fixes including devicetree additions, kexec cleanups, microMIPS stack
unwinding fixes, and a bunch of build fixes to clean up continuous
integration builds.
Its all been in linux-next for at least a couple of days, most of it
far longer.
Miscellaneous:
- Add IRQ stacks
- Add cacheinfo support
- Add "uzImage.bin" zboot target
- Unify performance counter definitions
- Export various (mainly assembly) symbols alongside their
definitions
- Audit and remove unnecessary uses of module.h
kexec & kdump:
- Lots of improvements and fixes
- Add correct copy_regs implementations
- Add debug logging of new kernel information
Security:
- Use Makefile.postlink to insert relocations into vmlinux
- Provide plat_post_relocation hook (used for Octeon KASLR)
- Add support for tuning mmap randomisation
- Relocate DTB
microMIPS:
- A load of unwind fixes
- Add some missing .insn to fix link errors
MIPSr6:
- Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
- Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
- Allow pre-r6 emulation on SMP MIPSr6 kernels
Cache management:
- Treat physically indexed dcache as non-aliasing
- Add return errors to protected cache ops for KVM
- CM3: Ensure L1 & L2 cache ECC checking matches
- CM3: Indicate inclusive caches
- I6400: Treat dcache as physically indexed
Memory management:
- Ensure bootmem doesn't corrupt reserved memory
- Export some TLB exception generation functions for KVM
OF:
- NULL check initial_boot_params before use in of_scan_flat_dt()
- Fix unaligned access in of_alias_scan()
SMP:
- CPS: Don't BUG if a CPU fails to start
Other fixes:
- Fix longstanding 64-bit IP checksum carry bug
- Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
- Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
CPU_FREQ_STAT,SCSI_DH changes
- Disable certain builtin compiler options, stack-check (whole
kernel), asynchronous-unwind-tables (VDSO).
- A bunch of build fixes from kernelci.org testing
- Various other minor cleanups & corrections
BMIPS:
- Migrate interrupts during bmips_cpu_disable
- BCM47xx: Add Luxul devices
- BCM47xx: Fix Asus WL-500W button inversion
- BCM7xxx: Add SPI device nodes
Generic (multiplatform):
- Add kexec DTB passing
- Fix big endian
- Add cpp_its_S in ksym_dep_filter to silence build warning
IP22:
- Reformat inline assembler code to modern standards
- Fix binutils 2.25 build error
IP27:
- Fix duplicate CAC_BASE definition build error
- Disable qlge driver to workaround broken compiler
Lantiq:
- Refresh defconfig and activate more drivers
- Lock DMA register access
- Fix cascading IRQ setup
- Fix build of VPE loader
- xway: Fix ethernet packet header corruption over reboot
Loongson1
- Add watchdog support
- 1B: Reduce DEFAULT_MEMSIZE to 64MB
- 1B: Change OSC clock name to match rest of kernel
- 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
Octeon:
- Add KASLR support
- Support Octeon III USB controller
- Fix large copy_from_user corner case
- Enable devtmpfs in defconfig
Netlogic:
- Fix non-default XLR build error due to netlogic,xlp-pic code
- Fix assembler warning from smpboot.S
pic32mzda:
- Fix linker error when early printk is disabled
Pistachio:
- Add base device tree
- Add Ci40 "Marduk" device tree
Ralink:
- Support raw appended DTB
- Add missing I2C & I2S clocks
- Add missing pinmux and fix pinmux function name typo
- Add missing clk_round_rate()
- Clean up prom_init()
- MT7621: Set SoC type
- MT7621: Support highmem
TXx9:
- Modernize printing of kernel messages and resolve KERN_CONT fallout
- 7segled: use permission-specific DEVICE_ATTR variants
XilFPGA:
- Add IRQ controller and UART IRQ
- Add AXI I2C and emaclite to DT & defconfig"
* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
MIPS: DTS: Add img directory to Makefile
MIPS: ip27: Disable qlge driver in defconfig
MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
MIPS: Lantiq: Keep ethernet enabled during boot
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
MIPS: Fix special case in 64 bit IP checksumming.
MIPS: OCTEON: Enable DEVTMPFS
MIPS: lantiq: Set physical_memsize
MIPS: sysmips: Remove duplicated include from syscall.c
Kbuild: Add cpp_its_S in ksym_dep_filter
MIPS: Audit and remove any unnecessary uses of module.h
MIPS: Unify perf counter register definitions
MIPS: Disable stack checks on MIPS kernels
MIPS: OCTEON: Platform support for OCTEON III USB controller
MIPS: Lantiq: Fix cascaded IRQ setup
MIPS: sync-r4k: Fix KERN_CONT fallout
MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
MIPS: Fix distclean with Makefile.postlink
...
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.
Remove the argument.
Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
bcsr_csc_handler() is a cascading interrupt handler. It has a
disable_irq_nosync()/enable_irq() pair around the generic_handle_irq()
call. The value of this disable/enable is zero because its a complete
noop:
disable_irq_nosync() merily increments the disable count without
actually masking the interrupt. enable_irq() soleley decrements the
disable count without touching the interrupt chip. The interrupt
cannot arrive again because the complete call chain runs with
interrupts disabled.
Remove it.
[ralf@linux-mips.org: Fold in followup fix from Thomas Gleixner.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10702/
Patchwork: https://patchwork.linux-mips.org/patch/10708/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch changes the static memory controller registers to offsets
from base, prefixes them with AU1000_ to avoid silent failures due to
changed addresses and introduces helpers to access them.
No functional changes, comparing assembly of a few select functions shows
no differences.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7463/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch changes all absolute SYS_XY registers to offsets from the
SYS block base, prefixes them with AU1000 to avoid silent failures due
to changed addresses, and introduces helper functions to read/write
them.
No functional changes, comparing assembly of a few select functions shows
no differences.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7464/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The au1xxx-ide driver isn't any faster than pata_platform since it
spends a lot of time busy waiting for DMA to finish; faster PIO/DMA
modes only work on the db1200 with a certain cpu speed, UDMA is broken,
and finally the old IDE layer is on death row, so time to switch to
the newer ATA layer.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6662/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With CONFIG_GPIOLIB=y gpios need to be requested before they can be
modified. Request the SD carddetect pins, and drop the SPI direction
setup, as the driver does that for us anyway. This gets rid of a
lot of WARN_ON()s triggered by GPIO core, and restores functionality
of the touschreen controller.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6497/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Panic() is going to add a \n itself and it's annoying if a panic message rolls
of the screen on a device with no scrollback.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The PB1550 is more or less a DB1550 without the PCI IDE controller,
a more complicated (read: configurable) Flash setup and some other
minor changes. Like the DB1550 it can be automatically detected by
reading the CPLD ID register bits.
This patch adds PB1550 detection and setup to the DB1550 code.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the loop in the cascade handler and instead unconditionally
handle just the first set interrupt coming from the CPLD.
This gets rid of a lot of spurious interrupts being triggered for
the SMSC91111 ethernet chip especially under high(er) IDE load:
"eth0: spurious interrupt (mask = 0xb3)"
Verified on DB1200 and DB1300.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3288/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull mtd update from David Woodhouse:
- More robust parsing especially of xattr data in JFFS2
- Updates to mxc_nand and gpmi drivers to support new boards and device tree
- Improve consistency of information about ECC strength in NAND devices
- Clean up partition handling of plat_nand
- Support NAND drivers without dedicated access to OOB area
- BCH hardware ECC support for OMAP
- Other fixes and cleanups, and a few new device IDs
Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.
* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
mtd: block2mtd: fix recursive call of mtd_writev
mtd: gpmi-nand: define ecc.strength
mtd: of_parts: fix breakage in Kconfig
mtd: nand: fix scan_read_raw_oob
mtd: docg3 fix in-middle of blocks reads
mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
mtd: add fixup for S29NS512P NOR flash.
jffs2: allow to complete xattr integrity check on first GC scan
jffs2: allow to discriminate between recoverable and non-recoverable errors
mtd: nand: omap: add support for hardware BCH ecc
ARM: OMAP3: gpmc: add BCH ecc api and modes
mtd: nand: check the return code of 'read_oob/read_oob_raw'
mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
mtd: m25p80: Add support for Winbond W25Q80BW
jffs2: get rid of jffs2_sync_super
jffs2: remove unnecessary GC pass on sync
jffs2: remove unnecessary GC pass on umount
jffs2: remove lock_super
mtd: gpmi: add gpmi support for mx6q
...
These will show up as a build failure once we clean up a
misuse of module.h in the mips termios header.
Uses export.h: (EXPORT_SYMBOL)
arch/mips/cavium-octeon/setup.c
arch/mips/pmc-sierra/yosemite/setup.c
arch/mips/rb532/devices.c
arch/mips/sni/setup.c
Uses module.h: (symbol_get/put)
arch/mips/alchemy/devboards/db1200.c
Uses module.h: (print_modules)
arch/mips/kernel/traps.c
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3448/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The PB1200 has the CPLD located at an address which on the DB1200 is
RAM; reading the Board-ID sometimes results in a PB1200 being detected
instead (especially during reboots after long uptimes).
On the other hand, the address of the DB1200's CPLD is hosting Flash
chips on the PB1200. Test for the DB1200 first and additionally do a
quick write-test to the hexleds register to make sure we're writing
to the CPLD.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3005/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled and we even check
and yell when an interrupt handler returns with interrupts enabled (see
commit [b738a50a: genirq: Warn when handler enables interrupts]).
So now this flag is a NOOP and can be removed.
[ralf@linux-mips.org: Fixed up conflicts in
arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and
arch/mips/kernel/perf_event.c.]
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: tglx@linutronix.de
linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2835/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The PB1200 is basically a DB1200 with additional MMC and camera sockets
and different base addresses for external hardware (CPLD, IDE, Net, NAND).
This patch implements the missing PB1200 features in DB1200 support code
and runtime board detection.
Tested on DB1200 only.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Initially I had to write to both the MASK and ENABLE registers, otherwise
the CPLD would generate tons of spurious interrupts. With the change to
the demux handler to disable the muxed line, it is now sufficient to
disable the interrupt by writing either the enable or mask register.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2865/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
