The following tests are failing on powerpc:
# perf test break
18: Breakpoint overflow signal handler : FAILED!
19: Breakpoint overflow sampling : FAILED!
The powerpc kenel so far does not have support to even create
instruction breakpoints using the perf event interface, so those tests
fail early in the config phase.
I added a '->is_supported()' callback to test struct to be able to
disable specific tests. It seems better than putting ifdefs directly to
the test array.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170601205450.GA398@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decompress_kmodule() decompresses kernel modules in order to load
symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs
the full file path to extract the file extension to determine the
decompression method. But overwriting 'name' will fail the
decompression since it might point to a non-existing old file.
Instead, use dso->long_name for having the correct extension and use the
real filename to decompress.
In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should
be the same. This allows resolving symbols in the old modules.
Before:
$ perf report -i perf.data.old | grep scsi_mod
0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6
0.00% as [scsi_mod] [k] 0x00000000000099e1
0.00% cc1 [scsi_mod] [k] 0x0000000000009830
0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f
After:
0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up
0.00% as [scsi_mod] [k] scsi_sg_alloc
0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd
0.00% cc1 [scsi_mod] [k] scsi_get_command
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf processes build-id event, it creates DSOs with the build-id.
But it didn't set the module short name (like '[module-name]') so when
processing a kernel mmap event of the module, it cannot found the DSO as
it only checks the short names.
That leads for perf to create a same DSO without the build-id info and
it'll lookup the system path even if the DSO is already in the build-id
cache. After kernel was updated, perf cannot find the DSO and cannot
show symbols in it anymore.
You can see this if you have an old data file (w/ old kernel version):
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols
...
The second message didn't show the build-id. With this patch:
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
/lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols
...
Now it shows the build-id but still cannot load the symbol table. This
is a different problem which will be fixed in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org
[ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds DT bindings info for Broadcom Stingray SOC
and related reference boards.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now that we have umask support, we shouldn't re-send the mode in a SETATTR
following an exclusive CREATE, or we risk having the same problem fixed in
commit 5334c5bdac ("NFS: Send attributes in OPEN request for
NFS4_CREATE_EXCLUSIVE4_1"), which is that files with S_ISGID will have that
bit stripped away.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: dff25ddb48 ("nfs: add support for the umask attribute")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When compiling with -Wsuggest-attribute=format in HOSTCFLAGS, gcc
complains that error_with_pos() may be declared with a printf format
attribute:
scripts/genksyms/genksyms.c:726:3: warning: function might be
possible candidate for ‘gnu_printf’ format attribute
[-Wsuggest-attribute=format]
vfprintf(stderr, fmt, args);
^~~~~~~~
This would allow catching printf-format errors at compile time in
callers to error_with_pos(). Add this attribute.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Because suspending to RAM may lose the register values, they are restored
on resume. This is currently done unconditionally because there is
currently no way to know (from the driver) whether they have really been
lost or are still valid. Writing MR also pings the watchdog and this may
not be what is expected so add a comment explaining why it happens.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Because the only way to use the driver is to have a device tree enabling
it, pdev->dev.of_node will never be NULL. Remove the unnecessary check.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wire up the existing arm64 support for SMBIOS tables (aka DMI) for ARM as
well, by moving the arm64 init code to drivers/firmware/efi/arm-runtime.c
(which is shared between ARM and arm64), and adding a asm/dmi.h header to
ARM that defines the mapping routines for the firmware tables.
This allows userspace to access these tables to discover system information
exposed by the firmware. It also sets the hardware name used in crash
dumps, e.g.:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = ed3c0000
[00000000] *pgd=bf1f3835
Internal error: Oops: 817 [#1] SMP THUMB2
Modules linked in:
CPU: 0 PID: 759 Comm: bash Not tainted 4.10.0-09601-g0e8f38792120-dirty #112
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
^^^
NOTE: This does *NOT* enable or encourage the use of DMI quirks, i.e., the
the practice of identifying the platform via DMI to decide whether
certain workarounds for buggy hardware and/or firmware need to be
enabled. This would require the DMI subsystem to be enabled much
earlier than we do on ARM, which is non-trivial.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170602135207.21708-14-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Granular QoS per VF feature must be enabled in FW before it can be
used.
Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW
command) if the feature has not been enabled -- the FW returns an error if
this is attempted.
Fixes: 08068cd568 ("net/mlx4: Added qos_vport QP configuration in VST mode")
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix kernel-doc warnings (typo) in drivers/net/phy/phy.c:
..//drivers/net/phy/phy.c:259: warning: No description found for parameter 'features'
..//drivers/net/phy/phy.c:259: warning: Excess function parameter 'feature' description in 'phy_lookup_setting'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
imx7d-sdb has a BCM4339 BT chip connected to UART6.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx7d-sdb has a BCM4339 Wifi chip connected to USDHC2.
Add support for it.
While at it, move the WL_REG_ON pin to the correct pinctrl node.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is not recommended to place the regulator nodes inside 'simple-bus',
so adjust them accordingly.
The motivation for rearranging this is to make it easier to add new
regulator nodes in the future.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The FEC driver ignores the GPIO polarity from 'phy-reset-gpios' and
considers that the Ethernet PHY is active low, unless the
property 'phy-reset-active-high' is present.
Fix the device tree description by explicitly passing the
'GPIO_ACTIVE_LOW' flag to the 'phy-reset-gpios' property.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ls1012a has separate input root clocks for core PLLs versus the platform
PLL, with the latter described as sysclk in the hw docs.
Accordingly, update the clock-frequency in sysclk to 125M as platform
input clock.
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property
is used to disable rx detection in P3 PHY mode.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently SD UHS-I modes were enabled by default on LS208xARDB boards,
but the new LS2088ARDB RevF board didn't support them any more since SDHC
circuit had been reworked. This patch is to disable SD UHS-I modes by default
in case of any issue on LS2088ARDB RevF
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The EPHY may be already enabled by bootloaders which have Ethernet
capability (e.g. current U-Boot). Thus it should be reseted properly
before doing the enabling sequence in the dwmac-sun8i driver, otherwise
the EMAC reset process may fail if no cable is plugged, and then fail
the dwmac-sun8i probing.
Tested on Orange Pi PC, One and Zero. All the boards fail to have
dwmac-sun8i probed with "EMAC reset timeout" without cable plugged
before, and with this fix they're now all able to successfully probe the
EMAC without cable plugged and then use the connection after a cable is
hot-plugged in.
Fixes: 9f93ac8d40 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: is not as formal as Signed-off-by:. It is a record that the acker
Reviewed-by: is similar.
Signed-off-by: David S. Miller <davem@davemloft.net>
Make return value void since function never returns meaningfull value.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make return value void since functions never returns meaningfull value.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make return value void since function never return meaningfull value
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This helper was only used by IMA of all things, which would get spurious
errors if CONFIG_BLOCK is disabled. Just opencode the call there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use the common helper uuid_is_null() and remove the xfs specific
helper uuid_is_nil().
The common helper does not check for the NULL pointer value as
xfs helper did, but xfs code never calls the helper with a pointer
that can be NULL.
Conform comments and warning strings to use the term 'null uuid'
instead of 'nil uuid', because this is the terminology used by
lib/uuid.c and its users. It is also the terminology used in
userspace by libuuid and xfsprogs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[hch: remove now unused uuid.[ch]]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Opencode uuid_getnodeuniq in the only caller, and directly decode
the uuid_t representation instead of using a structure cast for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Hoist the libnvdimm helper as an inline helper to linux/uuid.h
using an auxiliary const variable uuid_null in lib/uuid.c.
[hch: also add the guid variant. Both do the same but I'd like
to keep casts to a minimum]
The common helper uses the new abstract type uuid_t * instead of
u8 *.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[hch: added guid_is_null]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
These helper are used to compare and copy two uuid_t type objects.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[hch: also provide the respective guid_ versions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
