Woojung Huh says:
====================
dsa: add Microchip KSZ9477 DSA driver
This series of patches is for Microchip KSZ9477 DSA driver.
KSZ9477 is 7 ports GigE switch with numerous advanced features.
5 ports are 10/100/1000 Mbps internal PHYs and 2 ports have
Interfaces to SGMII, RGMII, MII or RMII.
This patch supports VLAN, MDB, FDB and port mirroring offloads.
Welcome reviews and comments from community.
Note: Tests are performed on internal development board.
V5
- add missing MODULE_LICENSE
V4
- update per review comments
- cosmetic changes
- net/dsa/tag_ksz.c
* skb_put() & memset() are changed to skb_put_padto()
- drivers/net/dsa/microchip/ksz_common.
* vlan access mutex is updated
* mib_names[] is changed to static const
V3
- update per review comments
- cosmetic changes
- drivers/net/dsa/microchip/ksz_common.c
* clean up ksz_switch_chips[]
* consolidate checking loops into functions
* update mutex for better locking
* replace devm_kmalloc_array() to devm_kcalloc()
- MAINTAINERS
* add missing net/dsa/tag_ksz.c
V2
- update per review comments
- several cosmetic changes
- net/dsa/tag_ksz.c
* constants are changed to defines
* remove skb_linearize() in ksz_rcv()
* ksz_xmit()checks skb tailroom before allocate new skb
- drivers/net/phy/micrel.c
* remove PHY_HAS_MAGICANEG from ksphy_driver[]
- drivers/net/dsa/microchip/ksz_common.c
* add timeout to avoid endless loop
* port initialization is move to ksz_port_enable() instead of ksz_setup_ports()
- Documentation/devicetree/bindings/net/dsa/ksz.txt
* fix typo and indentations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch
with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs.
The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII
or RMII. Either of these may connect directly to a host processor or
to an external PHY. The SGMII port may interface to a fiber optic transceiver.
This driver currently supports vlan, fdb, mdb & mirror dsa switch operations.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
bpf: stack depth tracking
Introduce tracking of bpf program stack depth in the verifier and use that
info to reduce bpf program stack consumption in the interpreter and x64 JIT.
Other JITs can take advantage of it as well in the future.
Most of the programs consume very little stack, so it's good optimization
in general and it's the first step toward bpf to bpf function calls.
Also use internal opcode for bpf_tail_call() marking to make clear
that jmp|call|x opcode is not uapi and may be used for actual
indirect call opcode in the future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Take advantage of stack_depth tracking in x64 JIT.
Round up allocated stack by 8 bytes to make sure it stays aligned
for functions called from JITed bpf program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
in order to JIT programs with different stack sizes we need to
make epilogue and exception path to be stack size independent,
hence move auxiliary stack space from the bottom of the stack
to the top of the stack.
Nice side effect is that JITed function prologue becomes shorter
due to imm8 offset encoding vs imm32.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 __bpf_prog_run() interpreters for various stack sizes add .text
but not a lot comparing to run-time stack savings
text data bss dec hex filename
26350 10328 624 37302 91b6 kernel/bpf/core.o.before_split
25777 10328 624 36729 8f79 kernel/bpf/core.o.after_split
26970 10328 624 37922 9422 kernel/bpf/core.o.now
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_bpf.ko doesn't call verifier before selecting interpreter or JITing,
hence the tests need to manually specify the amount of stack they consume.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
To track stack depth of classic bpf programs we only need
to analyze ST|STX instructions, since check_load_and_stores()
verifies that programs can load from stack only after write.
We also need to change the way cBPF stack slots map to eBPF stack,
since typical classic programs are using slots 0 and 1, so they
need to map to stack offsets -4 and -8 respectively in order
to take advantage of small stack interpreter and JITs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The next set of patches will take advantage of stack_depth tracking,
so make sure that the program that does bpf_tail_call() has
stack depth large enough for the callee.
We could have tracked the stack depth of the prog_array owner program
and only allow insertion of the programs with stack depth less
than the owner, but it will break existing applications.
Some of them have trivial root bpf program that only does
multiple bpf_tail_calls and at init time the prog array is empty.
In the future we may add a flag to do such tracking optionally,
but for now play simple and safe.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
free up BPF_JMP | BPF_CALL | BPF_X opcode to be used by actual
indirect call by register and use kernel internal opcode to
mark call instruction into bpf_tail_call() helper.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are three timing problems in the kthread usages of iscsi_target_mod:
- np_thread of struct iscsi_np
- rx_thread and tx_thread of struct iscsi_conn
In iscsit_close_connection(), it calls
send_sig(SIGINT, conn->tx_thread, 1);
kthread_stop(conn->tx_thread);
In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().
So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.
This is invalid according to the documentation of kthread_stop().
(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
early iscsi_target_rx_thread failure case - nab)
Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a OOPs originally introduced by:
commit bb048357da
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Thu Sep 5 14:54:04 2013 -0700
iscsi-target: Add sk->sk_state_change to cleanup after TCP failure
which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.
To address this issue, this patch makes the following changes.
First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.
Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running. For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().
The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed. For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.
Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.
Reported-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Reported-by: Hannes Reinecke <hare@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Varun Prakash <varun@chelsio.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Jakub Kicinski says:
====================
nfp: move BPF offload code into app
This series moves the eBPF offload code out of netdev/vNIC handling and
starts building the nfp_app. Port init is moved into the apps as well
because various apps associate vNICs, representors with ports differently.
First patch adds a helper for updating tc stats which has been waiting
in my tree to be included in any moderately related series.
Next series will bring communicating with FW using control messages,
then representors, BPF maps, tc flower... :)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow apps to associate private data with vNICs and move
BPF-specific fields of nfp_net to such structure.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move bulk of the eBPF offload code out of common vNIC code into
app-specific callbacks.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pure move of eBPF offload files to BPF app directory,
only change the names and relative header location.
nfp_asm.h stays in the main dir and it doesn't really
have to include nfp_bpf.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start fleshing out the apps by turning the vNIC init code to
a per-app callback. The two initial apps we have are NIC and
eBPF.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turn the function to read number of ports into a generic helper.
While at it make sure we propagate all errors other than -ENOENT.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forgetting to disable preemption around tcf_action_stats_update()
seems to be a common mistake. Add a helper function for updating
stats on all actions of a filter.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2017-05-31
This series contains updates to ixgbe and ixgbevf only.
Scott enables support for TSO & GSO for MPLS encapsulated packets for both
ixgbe and ixgbevf.
Liwei Song fixes an issue where seqcount/seqlock in ixgbe_get_stats64()
are not initialized in time, so move the initialization into probe routine
after the transmit and receive rings are initialized.
Paul cleans up led_[on|off] for X550EM_X, since the firmware configures
the PHY & MAC and we have no PHY access so LED on/off is not supported
with this device.
Emil provides several fixes, starting with enabling RSS on VF to VF
traffic on the same PF. Fixed PHY identification, where the previous
method was unreliable, so use a different register to ensure proper
identification. Cleaned up the logic which could cause us to
skip the link configuration, this skipping over the link configuration
was leaving SFP+ PHY's in an unstable state, so always call
setup_mac_link(). Added RS1 (rate select 1) support for ixgbe. Lastly,
fixed incorrect logic in the setting up of SFP+ link speed.
Mark fixes the thermal sensor event logic, where it was being executed
when there really was no thermal event. So simplify the logic to only
execute when there is a thermal event.
Tony adds additional error checks and reporting when setting a VF MAC
address to ensure that the MAC filter was successfully added. Also
fixed possible truncation warnings, as well as implicit fallthrough
warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-05-31
This series contains updates to i40e and i40evf only.
Jesse provides a couple of fixes, starting with cleaning up duplicate
lines of code. Fixed a missing line which enables RSS as a negotiated
feature. Since the VF does not have any way of reporting FCoE enabled,
so just force the code to always report FCoE as disabled.
Jake provides several fixes and changes, starting with fixing a race
condition in i40e. The hardware has a limitation on transmit PTP packets,
which requires us to limit the driver to timestamping a single packet at
once. This is done using a state bitlock which enforces that only one
timestamp request is honored at a time, unfortunately this suffers from
a race condition. Fixed a corner case where we failed to cleanup the
bit lock after a failed transmit, and resulted in a state bit being
locked forever. Added a new statistic which tracks when a transmit
timestamp request is skipped/ignored, since the driver can only handle
one transmit timestamp request at a time.
Christophe Jaillet fixes a NULL pointer dereference if kzalloc fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on usage patterns, the current LRU policy may create a
non-injective mapping between userspace ring ids and kernel rings.
This behaviour is undesired as apps that attempt to fill all HW blocks
would be unable to reach some of them.
This change forces the LRU policy to create bijective mappings only.
v2: compress ring_blacklist
v3: simplify amdgpu_ring_is_blacklisted() logic
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an LRU policy to map usermode rings to HW compute queues.
Most compute clients use one queue, and usually the first queue
available. This results in poor pipe/queue work distribution when
multiple compute apps are running. In most cases pipe 0 queue 0 is
the only queue that gets used.
In order to better distribute work across multiple HW queues, we adopt
a policy to map the usermode ring ids to the LRU HW queue.
This fixes a large majority of multi-app compute workloads sharing the
same HW queue, even though 7 other queues are available.
v2: use ring->funcs->type instead of ring->hw_ip
v3: remove amdgpu_queue_mapper_funcs
v4: change ring_lru_list_lock to spinlock, grab only once in lru_get()
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_queue_mgr, a mechanism that allows disjointing usermode's
ring ids from the kernel's ring ids.
The queue manager maintains a per-file descriptor map of user ring ids
to amdgpu_ring pointers. Once a map is created it is permanent (this is
required to maintain FIFO execution guarantees for a context's ring).
Different queue map policies can be configured for each HW IP.
Currently all HW IPs use the identity mapper, i.e. kernel ring id is
equal to the user ring id.
The purpose of this mechanism is to distribute the load across multiple
queues more effectively for HW IPs that support multiple rings.
Userspace clients are unable to check whether a specific resource is in
use by a different client. Therefore, it is up to the kernel driver to
make the optimal choice.
v2: remove amdgpu_queue_mapper_funcs
v3: made amdgpu_queue_mgr per context instead of per-fd
v4: add context_put on error paths
v5: rebase and include new IPs UVD_ENC & VCN_*
v6: drop unused amdgpu_ring_is_valid_index (Alex)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MQD structure matches the reg layout. Take advantage of this to
simplify HQD programming.
Note that the ACTIVE field still needs to be programmed last.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of taking the first pipe and giving the rest to kfd, take the
first 2 queues of each pipe.
Effectively, amdgpu and amdkfd own the same number of queues. But
because the queues are spread over multiple pipes the hardware will be
able to better handle concurrent compute workloads.
amdgpu goes from 1 pipe to 4 pipes, i.e. from 1 compute threads to 4
amdkfd goes from 3 pipe to 4 pipes, i.e. from 3 compute threads to 4
v2: fix policy comment
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of picking an arbitrary queue for KIQ, search for one according
to policy. The queue must be unused.
Also report the KIQ as an unavailable resource to KFD.
In testing I ran into KCQ initialization issues when using pipes 2/3 of
MEC2 for the KIQ. Therefore the policy disallows grabbing one of these.
v2: fix (ring.me + 1) to (ring.me -1) in amdgpu_amdkfd_device_init
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The assumption that we are only using the first pipe no longer holds.
Instead, calculate the queue_mask from the queue_bitmap.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pipes provide better concurrency than queues, therefore we want to make
sure that apps use queues from different pipes whenever possible.
Optimize for the trivial case where an app will consume rings in order,
therefore we don't want adjacent rings to belong to the same pipe.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the KGD to KFD interface to allow sharing pipes with queue
granularity instead of pipe granularity.
This allows for more interesting pipe/queue splits.
v2: fix overflow check for res.queue_mask
v3: fix shift overflow when setting res.queue_mask
v4: fix comment in is_pipeline_enabled()
v5: clamp res.queue_mask to the first MEC only
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current implementation is hardcoded to enable ME1/PIPE0 interrupts
only.
This patch allows amdgpu to enable interrupts for any pipe of ME1.
v2: added gfx9 support
v3: use soc15_grbm_select for gfx9
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously the queue/pipe split with kfd operated with pipe
granularity. This patch allows amdgpu to take ownership of an arbitrary
set of queues.
It also consolidates the last few magic numbers in the compute
initialization process into mec_init.
v2: support for gfx9
v3: renamed AMDGPU_MAX_QUEUES to AMDGPU_MAX_COMPUTE_QUEUES
v4: fix off-by-one in num_mec checks in *_compute_queue_acquire
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make amdgpu the owner of all per-pipe state of the HQDs.
This change will allow us to split the queues between kfd and amdgpu
with a queue granularity instead of pipe granularity.
This patch fixes kfd allocating an HDP_EOP region for its 3 pipes which
goes unused.
v2: support for gfx9
v3: fix gfx7 HPD intitialization
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
