struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We do find_domain() in __get_valid_domain_for_dev(), while we do the
same thing in get_valid_domain_for_dev(). No need to do it twice.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
arch_teardown_dma_ops() being the inverse of arch_setup_dma_ops()
,dma_ops should be cleared in the teardown path. Currently, only the
device's iommu mapping structures are cleared in arch_teardown_dma_ops,
but not the dma_ops. So on the next reprobe, dma_ops left in place is
stale from the first IOMMU setup, but iommu mappings has been disposed
of. This is a problem when the probe of the device is deferred and
recalled with the IOMMU probe deferral.
So for fixing this, slightly refactor by moving the code from
__arm_iommu_detach_device to arm_iommu_detach_device and cleanup
the former. This takes care of resetting the dma_ops in the teardown
path.
Fixes: 09515ef5dd ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With IOMMU probe deferral, iort_iommu_configure can be called
multiple times for the same device. Hence we have a check
to see if the device's fwspec is already translated and return
the iommu_ops from that directly. But the check is wrongly
placed in iort_iommu_xlate, which breaks devices with multiple
sids. Move the check to iort_iommu_configure.
Fixes: 5a1bb638d5 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error")
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
arch_setup_dma_ops() is used in device probe code paths to create an
IOMMU mapping and attach it to the device. The function assumes that the
device is attached to a device-specific IOMMU instance (or at least a
device-specific TLB in a shared IOMMU instance) and thus creates a
separate mapping for every device.
On several systems (Renesas R-Car Gen2 being one of them), that
assumption is not true, and IOMMU mappings must be shared between
multiple devices. In those cases the IOMMU driver knows better than the
generic ARM dma-mapping layer and attaches mapping to devices manually
with arm_iommu_attach_device(), which sets the DMA ops for the device.
The arch_setup_dma_ops() function takes this into account and bails out
immediately if the device already has DMA ops assigned. However, the
corresponding arch_teardown_dma_ops() function, called from driver
unbind code paths (including probe deferral), will tear the mapping down
regardless of who created it. When the device is reprobed
arch_setup_dma_ops() will be called again but won't perform any
operation as the DMA ops will still be set.
We need to reset the DMA ops in arch_teardown_dma_ops() to fix this.
However, we can't do so unconditionally, as then a new mapping would be
created by arch_setup_dma_ops() when the device is reprobed, regardless
of whether the device needs to share a mapping or not. We must thus keep
track of whether arch_setup_dma_ops() created the mapping, and only in
that case tear it down in arch_teardown_dma_ops().
Keep track of that information in the dev_archdata structure. As the
structure is embedded in all instances of struct device let's not grow
it, but turn the existing dma_coherent bool field into a bitfield that
can be used for other purposes.
Fixes: 09515ef5dd ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While deferring the probe of IOMMU masters, xlate and
add_device callbacks called from iort_iommu_configure
can pass back error values like -ENODEV, which means
the IOMMU cannot be connected with that master for real
reasons. Before the IOMMU probe deferral, all such errors
were ignored. Now all those errors are propagated back,
killing the master's probe for such errors. Instead ignore
all the errors except EPROBE_DEFER, which is the only one
of concern and let the master work without IOMMU, thus
restoring the old behavior. Also make explicit that
acpi_dma_configure handles only -EPROBE_DEFER from
iort_iommu_configure.
Fixes: 5a1bb638d5 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error")
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While deferring the probe of IOMMU masters, xlate and
add_device callbacks called from of_iommu_configure
can pass back error values like -ENODEV, which means
the IOMMU cannot be connected with that master for real
reasons. Before the IOMMU probe deferral, all such errors
were ignored. Now all those errors are propagated back,
killing the master's probe for such errors. Instead ignore
all the errors except EPROBE_DEFER, which is the only one
of concern and let the master work without IOMMU, thus
restoring the old behavior. Also make explicit that
of_dma_configure handles only -EPROBE_DEFER from
of_iommu_configure.
Fixes: 7b07cbefb6 ("iommu: of: Handle IOMMU lookup failure with deferred probing or error")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Magnus Damn <magnus.damn@gmail.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now with IOMMU probe deferral, we return -EPROBE_DEFER
for masters that are connected to an IOMMU which is not
probed yet, but going to get probed, so that we can attach
the correct dma_ops. So while trying to defer the probe of
the master, check if the of_iommu node that it is connected
to is marked in DT as 'status=disabled', then the IOMMU is never
is going to get probed. So simply return NULL and let the master
work without an IOMMU.
Fixes: 7b07cbefb6 ("iommu: of: Handle IOMMU lookup failure with deferred probing or error")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Magnus Damn <magnus.damn@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newly added code in the ipmmu-vmsa driver showed a small mistake
in a header file that can't be included by itself without CONFIG_IOMMU_DMA
enabled:
In file included from drivers/iommu/ipmmu-vmsa.c:13:0:
include/linux/dma-iommu.h:105:94: error: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
This adds a forward declaration for 'struct device', similar to how
we treat the other struct types in this case.
Fixes: 3ae4729202 ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops")
Fixes: 273df96353 ("iommu/dma: Make PCI window reservation generic")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SDVO was the last connector that's still using the legacy paths
for properties, and this is with a reason!
This connector implements a lot of properties dynamically,
and some of them shared with the digital connector state,
so sdvo_connector_state subclasses intel_digital_connector_state.
set_property had a lot of validation, but this is handled in the
drm core, so most of the validation can die off. The properties
are written right before enabling the connector, since there is no
good way to update the properties without crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-13-maarten.lankhorst@linux.intel.com
intel_hdmi supports 3 properties, force_audio, broadcast rgb and
scaling mode. The last one is only created for eDP, so the is_eDP
in set_property is not required.
panel fitting and broadcast rgb are straightforward and only requires
changing compute_config.
force_audio is also used to force DVI mode, which means changes to
compute_config and mode_valid. mode_valid is called with
connection_mutex held, so it can safely dereference connector->state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-11-maarten.lankhorst@linux.intel.com
Some atomic properties are common between the various kinds of
connectors, for example a lot of them use panel fitting mode.
It makes sense to put a lot of it in a common place, so each
connector can use it while they're being converted.
Implement the properties required for the connectors:
- scaling mode property
- force audio property
- broadcast rgb
- aspect ratio
While at it, make clear that intel_digital_connector_atomic_get_property
is a hack that has to be removed when all connector properties
are converted to atomic.
Changes since v1:
- Scaling mode and aspect ratio are partly handled in core now.
Changes since v2:
- Split out the scaling mode / aspect ratio changes to a preparation
patch.
- Use mode_changed for panel fitter, changes to this property
are checked by fastset.
- Allowed_scaling_modes is removed, handled through core now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-6-maarten.lankhorst@linux.intel.com
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};
@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)
@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p
@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;
Cross compiled these files:
sound/aoa/codecs/tas.c - powerpc
sound/mips/{hal2.c/sgio2audio.c} - mips
sound/ppc/{awacs.c/beep.c/tumbler.c} - powerpc
sound/soc/sh/siu_dai.c - sh
Could not find an architecture to compile sound/sh/aica.c.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is possible to update the backlight power and the brightness using
the sysfs and on writing it either returns the count or if the callback
function does not exist then returns the error code 'ENXIO'.
We have a situation where the userspace client is writing to the sysfs
to update the power and since the callback function exists the client
receives the return value as count and considers the operation to be
successful. That is correct as the write to the sysfs was successful.
But there is no way to know if the actual operation was done or not.
backlight_update_status() returns the error code if it fails. Pass that
to the userspace client who is trying to update the power so that the
client knows that the operation failed.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
ieee80211_tx_status() is only one of the possible ways a driver can
report a handled packet, some drivers call this for every packet while
others calls it rarely or never.
In order to invoke the TX LED in the non-status reporting cases this
patch pushes the call to ieee80211_led_tx() into
ieee80211_report_used_skb(), which is shared between the various code
paths.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This pattern was introduced a number of times in mac80211 just now,
and since it's present in a number of other places it makes sense
to add a little helper for it.
This just adds the helper and transforms the mac80211 code, a later
patch will transform other places.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When starting or stopping an aggregation session, one of the steps
is that the driver calls back to mac80211 that the start/stop can
proceed. This is handled by queueing up a fake SKB and processing
it from the normal iface/sdata work. Since this isn't flushed when
disassociating, the following race is possible:
* associate
* start aggregation session
* driver callback
* disassociate
* associate again to the same AP
* callback processing runs, leading to a WARN_ON() that
the TID hadn't requested aggregation
If the second association isn't to the same AP, there would only
be a message printed ("Could not find station: <addr>"), but the
same race could happen.
Fix this by not going the whole detour with a fake SKB etc. but
simply looking up the aggregation session in the driver callback,
marking it with a START_CB/STOP_CB bit and then scheduling the
regular aggregation work that will now process these bits as well.
This also simplifies the code and gets rid of the whole problem
with allocation failures of said skb, which could have left the
session in limbo.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A lot of drivers are providing their own ->cmdfunc(), and most of the
time this implementation does not support all possible NAND operations.
But since ->cmdfunc() cannot return an error code, the core has no way
to know that the operation it requested is not supported.
This is a problem we cannot address for all kind of operations with the
current design, but we can prevent these silent failures for the
GET/SET FEATURES operation by overloading the default
->onfi_{set,get}_features() methods with one returning -ENOTSUPP.
Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
This changes the connector probe helper function to use the new
encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid()
helper callbacks to validate the modes.
The new callbacks are optional so the behaviour remains the same
if they are not implemented. If they are, then the code loops
through all the connector's encodersXbridgesXcrtcs and calls the
callback.
If at least a valid encoderXbridgeXcrtc combination is found which
accepts the mode then the function returns MODE_OK.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Changes v3->v4:
- Change function name (Laurent)
Changes v2->v3:
- Call also bridge->mode_valid (Daniel)
Changes v1->v2:
- Use new helpers suggested by Ville
- Change documentation (Daniel)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d4e3ba87d822fa92f1b8773e441b9a02af3bde71.1495720737.git.joabreu@synopsys.com
Replace '%d' by '%zu' to fix the following compilation warning:-
drivers/dma/imx-sdma.c: In function ‘sdma_prep_dma_cyclic’:
drivers/dma/imx-sdma.c:1327:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=]
channel, period_len, 0xffff);
^
drivers/dma/imx-sdma.c:1350:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n",
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In descriptor mode, the descriptor running pointer is not maintained
by the interrupt handler, thus, driver finds the running descriptor
from the descriptor pointer field in the CHCRB register.
But, CHCRB::DPTR indicates *next* descriptor pointer, not current.
Thus, The residue calculation will be missed. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Wire up dma_map_resource() for slave transfers, so that we can let the
PL330 use IOMMU-backed DMA mapping ops on systems with an appropriate
IOMMU and RAM above 4GB, to avoid CPU bounce buffering.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
More stuff for 4.13:
- skl+ wm fixes from Mahesh Kumar
- some refactor and tests for i915_sw_fence (Chris)
- tune execlist/scheduler code (Chris)
- g4x,g33 gpu reset improvements (Chris, Mika)
- guc code cleanup (Michal Wajdeczko, Michał Winiarski)
- dp aux backlight improvements (Puthikorn Voravootivat)
- buffer based guc/host communication (Michal Wajdeczko)
* tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel: (253 commits)
drm/i915: Update DRIVER_DATE to 20170529
drm/i915: Keep the forcewake timer alive for 1ms past the most recent use
drm/i915/guc: capture GuC logs if FW fails to load
drm/i915/guc: Introduce buffer based cmd transport
drm/i915/guc: Disable send function on fini
drm: Add definition for eDP backlight frequency
drm/i915: Drop AUX backlight enable check for backlight control
drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU
drm/i915: Only GGTT vma may be pinned and prevent shrinking
drm/i915: Serialize GTT/Aperture accesses on BXT
drm/i915: Convert i915_gem_object_ops->flags values to use BIT()
drm/i915/selftests: Silence compiler warning in igt_ctx_exec
drm/i915/guc: Skip port assign on first iteration of GuC dequeue
drm/i915: Remove misleading comment in request_alloc
drm/i915/g33: Improve reset reliability
Revert "drm/i915: Restore lost "Initialized i915" welcome message"
drm/i915/huc: Update GLK HuC version
drm/i915: Check for allocation failure
drm/i915/guc: Remove action status and statistics from debugfs
drm/i915/g4x: Improve gpu reset reliability
...
Add --orphan-handling=warn to final link flags. This ensures we can
handle all sections explicitly. This would have caught subtle breakage
such as 7de3b27bac at build-time.
Also bring existing orphan sections into the fold:
- .text.hot and .text.unlikely are compiler generated sections.
- .sdata2, .dynsbss, .plt are used by PPC32
- We previously did not specify DWARF_DEBUG or STABS_DEBUG
- DWARF_DEBUG did not include all DWARF sections that can be emitted
- A number of sections are unused and can be discarded.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use a tool to check that the location of "fixed sections" are where
we expected them to be, which catches cases the linker script can't
(stubs being added to start of .text section), and which ends up
being neater.
Sample output:
ERROR: start_text address is c000000000008100, should be c000000000008000
ERROR: see comments in arch/powerpc/tools/head_check.sh
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fold in fix from Nick for 4.6 era toolchains]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Very large kernels may require linker stubs for branches from HEAD
text code. The linker may place these stubs before the HEAD text
sections, which breaks the assumption that HEAD text is located at 0
(or the .text section being located at 0x7000/0x8000 on Book3S
kernels).
Provide an option to create a small section just before the .text
section with an empty 256 - 4 bytes, and adjust the start of the .text
section to match. The linker will tend to put stubs in that section
and not break our relative-to-absolute offset assumptions.
This causes a small waste of space on common kernels, but allows large
kernels to build and boot. For now, it is an EXPERT config option,
defaulting to =n, but a reference is provided for it in the build-time
check for such breakage. This is good enough for allyesconfig and
custom users / hackers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Direct banches from code below __end_interrupts to code above
__end_interrupts when built with CONFIG_RELOCATABLE are disallowed
because they will break when the kernel is not located at 0.
Sample output:
WARNING: Unrelocated relative branches
c000000000000118 bl-> 0xc000000000038fb8 <pnv_restore_hyp_resource>
c00000000000013c b-> 0xc0000000001068a4 <kvm_start_guest>
c000000000000148 b-> 0xc00000000003919c <pnv_wakeup_loss>
c00000000000014c b-> 0xc00000000003923c <pnv_wakeup_noloss>
c0000000000005a4 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
c000000000001af0 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
c000000000001b24 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
c000000000001b58 b-> 0xc000000000106ffc <kvmppc_interrupt_hv>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For final link, the powerpc64 linker generates fpr save/restore
functions on-demand, placing them in the .sfpr section. Starting with
binutils 2.25, these can be provided for non-final links with
--save-restore-funcs. Use that where possible for module links.
This saves about 200 bytes per module (~60kB) on powernv defconfig
build.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no need to create a new section for these. Consolidate with
32-bit and just use .text.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
crtsaveres.S is empty with 64-bit builds already, so just don't
build and link it to match the vmlinux build.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use CONFIG_PPC64_BOOT_WRAPPER not CONFIG_PPC32 to fix BE build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 64-bit linker creates save/restore functions on demand with final
links, so vmlinux does not require crtsavres.o.
Make crtsavres.o extra-y on 64-bit (it is still required by modules).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The arch version is identical except for comments and white space.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These are completely obvious as all they do is include the asm-generic
versions.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
