This patch is to remove the typedef sctp_sctphdr_t, and replace
with struct sctphdr in the places where it's using this typedef.
It is also to fix some indents and use sizeof(variable) instead
of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman says:
====================
nfp: introduce flower offload capabilities
this series adds flower offload to the NFP driver. It builds on recent
work to add representor and a skeleton flower app - now the app does what
its name says.
In general the approach taken is to allow some flows within
the universe of possible flower matches and tc actions to be offloaded.
It is planned that this support will grow over time but the support
offered by this patch-set seems to be a reasonable starting point.
Key Changes since v2:
* Revised flow structures to simplify setup/teardown and locking of stats
* Addressed other code-change review of v2
Other review questions regarding v2 have been answered on netdev.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the flower offloads never sends messages to the hardware,
and never registers a handler for receiving messages from hardware.
This patch enables the flower offloads to send control messages to
hardware when adding and removing flow rules. Additionally it
registers a control message rx handler for receiving stats updates
from hardware for each offloaded flow.
Additionally this patch adds 4 control message types; Add, modify and
delete flow, as well as flow stats. It also allows
nfp_flower_cmsg_get_data() to be used outside of cmsg.c.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously there was no way of updating flow rule stats after they
have been offloaded to hardware. This is solved by keeping track of
stats received from hardware and providing this to the TC handler
on request.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds metadata describing the mask id of each flow and keeps track of
flows installed in hardware. Previously a flow could not be removed
from hardware as there was no way of knowing if that a specific flow
was installed. This is solved by storing the offloaded flows in a
hash table.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extends matching capabilities for flower offloads to include vlan,
layer 2, layer 3 and layer 4 type matches. This includes both exact
and wildcard matching.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extends the flower flow add function by calculating which match
fields are present in the flower offload structure and allocating
the appropriate space to describe these.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a flower based TC offload handler for representor devices, this
is in addition to the bpf based offload handler. The changes in this
patch will be used in a follow-up patch to add tc flower offload to
the NFP.
The flower app enables tc offloads on representors by default.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add phys_switch_id support by allowing lookup of
SWITCHDEV_ATTR_ID_PORT_PARENT_ID via the nfp_repr_port_attr_get
switchdev operation.
This is visible to user-space in the phys_switch_id attribute
of a netdev.
e.g.
cd /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0
find . -name phys_switch_id | xargs grep .
./net/eth3/phys_switch_id:00154d1300bd
./net/eth4/phys_switch_id:00154d1300bd
./net/eth2/phys_switch_id:00154d1300bd
grep: ./net/eth5/phys_switch_id: Operation not supported
In the above eth2 and eth3 and representor netdevs for the first and second
physical port. eth4 is the representor for the PF. And eth5 is the PF netdev.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured
and do nothing otherwise. This allows for slightly cleaner code which
uses switchdev but does not select NET_SWITCHDEV.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ACPI 6.2 added new NVDIMM root DSM functions. Define their
data structures.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Display bus_dsm_mask in sysfs as /sys/bus/nd/devices/ndbusX/nfit/dsm_mask.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a bus level dsm_mask to nvdimm_bus_descriptor to allow the passthru
calling mechanism to specify a different mask from the cmd_mask.
Populate bus_dsm_mask and use it to filter dsm calls that user can
make through the pass thru interface.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
[djbw: use command number constants instead of a magic mask value]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Set ND_CMD_CALL in the cmd_mask to enable calling root
functions via the pass thru mechanism.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Have dsm functions called via the pass thru mechanism also
be checked against clear to send.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some critical messages such as IO errors, metadata failures were printed
with dev_info. Make them louder by upgrading them to dev_warn or
dev_error.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ep->base.sk gets it's value since sctp_endpoint_new, nowhere
will change it. So there's no need to check if it's null, as
it can never be null.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fix from Thomas Gleixner:
"The last fix for perf for this cycles:
- Prevent a segfault when kernel.kptr_restrict=2 is set by avoiding a
null pointer dereference"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf machine: Fix segfault for kernel.kptr_restrict=2
Pull pinctrl fix from Linus Walleij:
"Brian noticed that this regression has not got a proper fix for the
entire merge window and consequently we need to revert the offending
commit.
It's part of the RT-mainstream work, the dance goes like this, two
steps forward, one step back.
Summary:
- A last fix for v4.12, an IRQ problem reported early in the merge
window appears not to have been properly fixed, so the offending
commit will be reverted and we will find the proper fix for v4.13.
Hopefully"
* tag 'pinctrl-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
Revert "pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip"
Pull last minute fixes for GPIO from Linus Walleij:
- Fix another ACPI problem with broken BIOSes.
- Filter out the right GPIO events, making a very user-visible bug go
away.
* tag 'gpio-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: acpi: Skip _AEI entries without a handler rather then aborting the scan
gpiolib: fix filtering out unwanted events
Elena Reshetova says:
====================
v3 net generic subsystem refcount conversions
Changes in v3:
Rebased on top of the net-next tree.
Changes in v2:
No changes in patches apart from rebases, but now by
default refcount_t = atomic_t (*) and uses all atomic standard operations
unless CONFIG_REFCOUNT_FULL is enabled. This is a compromise for the
systems that are critical on performance (such as net) and cannot accept even
slight delay on the refcounter operations.
This series, for core network subsystem components, replaces atomic_t reference
counters with the new refcount_t type and API (see include/linux/refcount.h).
By doing this we prevent intentional or accidental
underflows or overflows that can led to use-after-free vulnerabilities.
These patches contain only generic net pieces. Other changes will be sent separately.
The patches are fully independent and can be cherry-picked separately.
The big patches, such as conversions for sock structure, need a very detailed
look from maintainers: refcount managing is quite complex in them and while
it seems that they would benefit from the change, extra checking is needed.
The biggest corner issue is the fact that refcount_inc() does not increment
from zero.
If there are no objections to the patches, please merge them via respective trees.
* The respective change is currently merged into -next as
"locking/refcount: Create unchecked atomic_t implementation".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
This conversion requires overall +1 on the whole
refcounting scheme.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At present, interrupts are hard-disabled fairly late in the guest
entry path, in the assembly code. Since we check for pending signals
for the vCPU(s) task(s) earlier in the guest entry path, it is
possible for a signal to be delivered before we enter the guest but
not be noticed until after we exit the guest for some other reason.
Similarly, it is possible for the scheduler to request a reschedule
while we are in the guest entry path, and we won't notice until after
we have run the guest, potentially for a whole timeslice.
Furthermore, with a radix guest on POWER9, we can take the interrupt
with the MMU on. In this case we end up leaving interrupts
hard-disabled after the guest exit, and they are likely to stay
hard-disabled until we exit to userspace or context-switch to
another process. This was masking the fact that we were also not
setting the RI (recoverable interrupt) bit in the MSR, meaning
that if we had taken an interrupt, it would have crashed the host
kernel with an unrecoverable interrupt message.
To close these races, we need to check for signals and reschedule
requests after hard-disabling interrupts, and then keep interrupts
hard-disabled until we enter the guest. If there is a signal or a
reschedule request from another CPU, it will send an IPI, which will
cause a guest exit.
This puts the interrupt disabling before we call kvmppc_start_thread()
for all the secondary threads of this core that are going to run vCPUs.
The reason for that is that once we have started the secondary threads
there is no easy way to back out without going through at least part
of the guest entry path. However, kvmppc_start_thread() includes some
code for radix guests which needs to call smp_call_function(), which
must be called with interrupts enabled. To solve this problem, this
patch moves that code into a separate function that is called earlier.
When the guest exit is caused by an external interrupt, a hypervisor
doorbell or a hypervisor maintenance interrupt, we now handle these
using the replay facility. __kvmppc_vcore_entry() now returns the
trap number that caused the exit on this thread, and instead of the
assembly code jumping to the handler entry, we return to C code with
interrupts still hard-disabled and set the irq_happened flag in the
PACA, so that when we do local_irq_enable() the appropriate handler
gets called.
With all this, we now have the interrupt soft-enable flag clear while
we are in the guest. This is useful because code in the real-mode
hypercall handlers that checks whether interrupts are enabled will
now see that they are disabled, which is correct, since interrupts
are hard-disabled in the real-mode code.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Since commit b009031f74 ("KVM: PPC: Book3S HV: Take out virtual
core piggybacking code", 2016-09-15), we only have at most one
vcore per subcore. Previously, the fact that there might be more
than one vcore per subcore meant that we had the notion of a
"master vcore", which was the vcore that controlled thread 0 of
the subcore. We also needed a list per subcore in the core_info
struct to record which vcores belonged to each subcore. Now that
there can only be one vcore in the subcore, we can replace the
list with a simple pointer and get rid of the notion of the
master vcore (and in fact treat every vcore as a master vcore).
We can also get rid of the subcore_vm[] field in the core_info
struct since it is never read.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Intel PT enhancements:
- Support "ptwrite" instruction, a way to stuff 32 or 64 bit values into
the Intel PT trace (Adrian Hunter)
- Support power events in Intel PT to report changes to C-state (Adrian
Hunter)
- Synthesize Intel PT events as PERF_RECORD_SAMPLE records with a
perf_event_attr.type (PERF_TYPE_SYNTH) just after the range used by the
kernel, i.e. right after what is allocated for PMUs, at INT_MAX + 1U,
attr.config will have the identification for the synthesized event and
the PERF_SAMPLE_RAW payload will have its fields (Adrian Hunter)
Infrastructure changes:
- Remove warning() and error(), using instead pr_warning() and
pr_error(), consolidating error reporting (Arnaldo Carvalho de Melo)
- Add platform dependency to 'perf test 15' (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
platform_get_irq() returns an error code, but the ac97c
driver ignores it and always returns -ENXIO. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error.
Print and propagate the return value of platform_get_irq on failure.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group.
The content of sony_laptop_input_index does not change and is declared
as a static global array.
Constify spic_attribute_group and sony_laptop_input_index.
File size before:
text data bss dec hex filename
31273 5176 372 36821 8fd5 drivers/platform/x86/sony-laptop.o
File size After adding 'const':
text data bss dec hex filename
31337 5112 372 36821 8fd5 drivers/platform/x86/sony-laptop.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[dvhart: updated commit message, includes fix suggested by Arnd Bergmann]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Using a dedicated Kconfig option for enabling debugging means the user
may be forced to recompile their kernel in order to gather debugging
information, which is inconvenient. Replace custom debugging
infrastructure with standard logging functions, taking advantage of
dynamic debug. Replace a pr_info() call inside an ACPI callback with an
acpi_handle_info() call.
The following mapping was used:
- FUJLAPTOP_DBG_ERROR -> acpi_handle_err()
- FUJLAPTOP_DBG_WARN -> acpi_handle_info() / dev_info()
- FUJLAPTOP_DBG_INFO -> acpi_handle_debug()
- FUJLAPTOP_DBG_TRACE -> acpi_handle_debug() / dev_dbg()
This means that some events which used to only be logged when the user
explicitly requested it will now be logged by default:
- ACPI method evaluation errors,
- unknown ACPI notification codes,
- unknown hotkey scancodes.
The first type of events should happen rarely, if ever at all. The rest
is interesting from driver development perspective as their presence in
the logs will mean the driver is unaware of certain events, handling of
which should be implemented.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
acpi_ns_initialize_devices(), which is called during system-wide ACPI
initialization, already detects and calls all _INI methods belonging to
objects present in ACPI tables. There is no need to call these methods
again every time the module is loaded because they only initialize
status flags and hotkey-related variables; status flags are effectively
constants, hotkey-related variables may be assigned non-zero values
before acpi_fujitsu_laptop_add() is called, but that does not really
matter as we drain the scancodes queued in the firmware's ring buffer
before doing anything else.
Remove sections of code which invoke and check evaluation status of the
_INI methods belonging to the ACPI devices handled by the driver.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Calling acpi_bus_update_power() for ACPI devices FUJ02B1 and FUJ02E3 is
pointless as they are not power manageable (neither _PS0 nor _PR0 is
defined for any of them), which causes their power state to be inherited
from their parent devices. Given the ACPI paths of these two devices
(\_SB.PCI0.LPCB.FJEX, \_SB.FEXT), their parent devices are also not
power manageable. These parent devices will thus have their power state
initialized to ACPI_STATE_D0, which in turn causes the power state for
both FUJ02B1 and FUJ02E3 to always be ACPI_STATE_D0 ("on").
Remove relevant acpi_bus_update_power() calls along with parts of debug
messages that they were supposed to have an effect on.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
In the case of brightness-related FUJ02B1 ACPI device, initializing the
input device associated with it identically as acpi-video initializes
its input device makes sense. However, using the same data for the
input device associated with the FUJ02E3 ACPI device makes little sense,
because the latter has nothing to do with video and assigning an
arbitrary product ID to it is redundant.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
No formatting is needed when setting ACPI device name and class, so
switch to using strcpy() for this purpose.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Do not check whether the pointer passed to ACPI add callbacks is NULL as
it is earlier dereferenced anyway in the bus-level probe callback,
acpi_device_probe().
Do not check the value of acpi_disabled in fujitsu_init(), because it is
already done by acpi_bus_register_driver(), which is the first function
called by fujitsu_init().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
