Introduce a test command for health reporters. User might use this
command to trigger test event on a reporter if the reporter supports it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently drivers have to report their pause frames statistics
via ethtool -S, and there is a wide variety of names used for
these statistics.
Add the two statistics defined in IEEE 802.3x to the standard
API. Create a new ethtool request header flag for including
statistics in the response to GET commands.
Always create the ETHTOOL_A_PAUSE_STATS nest in replies when
flag is set. Testing if driver declares the op is not a reliable
way of checking if any stats will actually be included and therefore
we don't want to give the impression that presence of
ETHTOOL_A_PAUSE_STATS indicates driver support.
Note that this patch does not include PFC counters, which may fit
better in dcbnl? But mostly I don't need them/have a setup to test
them so I haven't looked deeply into exposing them :)
v3:
- add a helper for "uninitializing" stats, rather than a cryptic
memset() (Andrew)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We fail to get the BMCS's device id with low probability when loading
the ipmi driver and it causes BMC device registration failed. When this
issue occurs we got below kernel prints:
[Wed Sep 9 19:52:03 2020] ipmi_si IPI0001:00: IPMI message handler:
device id demangle failed: -22
[Wed Sep 9 19:52:03 2020] IPMI BT: using default values
[Wed Sep 9 19:52:03 2020] IPMI BT: req2rsp=5 secs retries=2
[Wed Sep 9 19:52:03 2020] ipmi_si IPI0001:00: Unable to get the
device id: -5
[Wed Sep 9 19:52:04 2020] ipmi_si IPI0001:00: Unable to register
device: error -5
When this issue happens, we want to manually unload the driver and try to
load it again, but it can't be unloaded by 'rmmod' as it is already 'in
use'.
We add a print in handle_one_recv_msg(), when this issue happens,
the msg we received is "Recv: 1c 01 d5", which means the data_len is 1,
data[0] is 0xd5 (completion code), which means "bmc cannot execute
command. Command, or request parameter(s), not supported in present
state". Debug code:
static int handle_one_recv_msg(struct ipmi_smi *intf,
struct ipmi_smi_msg *msg) {
printk("Recv: %*ph\n", msg->rsp_size, msg->rsp);
... ...
}
Then in ipmi_demangle_device_id(), it returned '-EINVAL' as 'data_len < 7'
and 'data[0] != 0'.
We created this patch to retry the get device id when this error
happens. We reproduced this issue again and the retry succeed on the
first retry, we finally got the correct msg and then all is ok:
Recv: 1c 01 00 01 81 05 84 02 af db 07 00 01 00 b9 00 10 00
So use a retry machanism in this patch to give bmc more opportunity to
correctly response kernel when we received specific completion codes.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Message-Id: <20200915071817.4484-1-tian.xianting@h3c.com>
[Cleaned up the verbage a bit in the header and prints.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The 8xx has 4 page sizes: 4k, 16k, 512k and 8M
4k and 16k can be selected at build time as standard page sizes,
and 512k and 8M are hugepages.
When 4k standard pages are selected, 16k pages are not available.
Allow 16k pages as hugepages when 4k pages are used.
To allow that, implement arch_make_huge_pte() which receives
the necessary arguments to allow setting the PTE in accordance
with the page size:
- 512 k pages must have _PAGE_HUGE and _PAGE_SPS. They are set
by pte_mkhuge(). arch_make_huge_pte() does nothing.
- 16 k pages must have only _PAGE_SPS. arch_make_huge_pte() clears
_PAGE_HUGE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a518abc29266a708dfbccc8fce9ae6694fe4c2c6.1598862623.git.christophe.leroy@csgroup.eu
Paul needs 1a21e5b930 ("drm/ingenic: Fix leak of device_node
pointer") and 3b5b005ef7 ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The patch partially reverts some of the UAPI bits of the buffer
cache management hints. Namely, the queue consistency (memory
coherency) user-space hint because, as it turned out, the kernel
implementation of this feature was misusing DMA_ATTR_NON_CONSISTENT.
The patch reverts both kernel and user space parts: removes the
DMA consistency attr functions, rolls back changes to v4l2_requestbuffers,
v4l2_create_buffers structures and corresponding UAPI functions
(plus compat32 layer) and cleans up the documentation.
[hverkuil: fixed a few typos in the commit log]
[hverkuil: fixed vb2_core_reqbufs call in drivers/media/dvb-core/dvb_vb2.c]
[mchehab: fixed a typo in the commit log: revers->reverts]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
MIPS defines two kvm types:
#define KVM_VM_MIPS_TE 0
#define KVM_VM_MIPS_VZ 1
In Documentation/virt/kvm/api.rst it is said that "You probably want to
use 0 as machine type", which implies that type 0 be the "automatic" or
"default" type. And, in user-space libvirt use the null-machine (with
type 0) to detect the kvm capability, which returns "KVM not supported"
on a VZ platform.
I try to fix it in QEMU but it is ugly:
https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html
And Thomas Huth suggests me to change the definition of kvm type:
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html
So I define like this:
#define KVM_VM_MIPS_AUTO 0
#define KVM_VM_MIPS_VZ 1
#define KVM_VM_MIPS_TE 2
Since VZ and TE cannot co-exists, using type 0 on a TE platform will
still return success (so old user-space tools have no problems on new
kernels); the advantage is that using type 0 on a VZ platform will not
return failure. So, the only problem is "new user-space tools use type
2 on old kernels", but if we treat this as a kernel bug, we can backport
this patch to old stable kernels.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add work completion opcodes to a new ib_uverbs_wc_opcode enum in
ib_user_verbs.h. This plays the same role as ib_uverbs_wr_opcode
documenting the opcodes in the user space API.
Assigned the IB_WC_XXX opcodes in ib_verbs.h to the IB_UVERBS_WC_XXX
where they are defined. This follows the same pattern as the IB_WR_XXX
opcodes. This fixes an incorrect value for LSO that had crept in but
is not currently being used.
Added a missing IB_WR_BIND_MW opcode in ib_verbs.h.
Link: https://lore.kernel.org/r/20200903224039.437391-2-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the unused3 byte in struct igmpmsg to hold the high 8 bits of the
VIF ID.
If using more than 255 IPv4 multicast interfaces it is necessary to have
access to a VIF ID for cache reports that is wider than 8 bits, the VIF
ID present in the igmpmsg reports sent to mroute_sk was only 8 bits wide
in the igmpmsg header. Adding the high 8 bits of the 16 bit VIF ID in
the unused byte allows use of more than 255 IPv4 multicast interfaces.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Insert the multicast route table ID as a Netlink attribute to Netlink
cache report notifications.
When multiple route tables are in use it is necessary to have a way to
determine which route table a given cache report belongs to when
receiving the cache report.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements basic DAX support. mmap() is not implemented
yet and will come in later patches. This patch looks into implemeting
read/write.
We make use of interval tree to keep track of per inode dax mappings.
Do not use dax for file extending writes, instead just send WRITE message
to daemon (like we do for direct I/O path). This will keep write and
i_size change atomic w.r.t crash.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Introduce two new fuse commands to setup/remove memory mappings. This
will be used to setup/tear down file mapping in dax window.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The device communicates FUSE_SETUPMAPPING/FUSE_REMOVMAPPING alignment
constraints via the FUST_INIT map_alignment field. Parse this field and
ensure our DAX mappings meet the alignment constraints.
We don't actually align anything differently since our mappings are
already 2MB aligned. Just check the value when the connection is
established. If it becomes necessary to honor arbitrary alignments in
the future we'll have to adjust how mappings are sized.
The upshot of this commit is that we can be confident that mappings will
work even when emulating x86 on Power and similar combinations where the
host page sizes are different.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Setup a dax device.
Use the shm capability to find the cache entry and map it.
The DAX window is accessed by the fs/dax.c infrastructure and must have
struct pages (at least on x86). Use devm_memremap_pages() to map the
DAX window PCI BAR and allocate struct page.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Soon, XFS will support quota grace period expiration timestamps beyond
the year 2038, widen the timestamp fields to handle the extra time bits.
Internally, XFS now stores unsigned 34-bit quantities, so the extra 8
bits here should work fine. (Note that XFS is the only user of this
structure.)
Link: https://lore.kernel.org/r/20200909163413.GJ7955@magnolia
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
A devlink port may be for a controller consist of PCI device.
A devlink instance holds ports of two types of controllers.
(1) controller discovered on same system where eswitch resides
This is the case where PCI PF/VF of a controller and devlink eswitch
instance both are located on a single system.
(2) controller located on external host system.
This is the case where a controller is located in one system and its
devlink eswitch ports are located in a different system.
When a devlink eswitch instance serves the devlink ports of both
controllers together, PCI PF/VF numbers may overlap.
Due to this a unique phys_port_name cannot be constructed.
For example in below such system controller-0 and controller-1, each has
PCI PF pf0 whose eswitch ports can be present in controller-0.
These results in phys_port_name as "pf0" for both.
Similar problem exists for VFs and upcoming Sub functions.
An example view of two controller systems:
---------------------------------------------------------
| |
| --------- --------- ------- ------- |
----------- | | vf(s) | | sf(s) | |vf(s)| |sf(s)| |
| server | | ------- ----/---- ---/----- ------- ---/--- ---/--- |
| pci rc |=== | pf0 |______/________/ | pf1 |___/_______/ |
| connect | | ------- ------- |
----------- | | controller_num=1 (no eswitch) |
------|--------------------------------------------------
(internal wire)
|
---------------------------------------------------------
| devlink eswitch ports and reps |
| ----------------------------------------------------- |
| |ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 |ctrl-0 | |
| |pf0 | pf0vfN | pf0sfN | pf1 | pf1vfN |pf1sfN | |
| ----------------------------------------------------- |
| |ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 |ctrl-1 | |
| |pf1 | pf1vfN | pf1sfN | pf1 | pf1vfN |pf0sfN | |
| ----------------------------------------------------- |
| |
| |
| --------- --------- ------- ------- |
| | vf(s) | | sf(s) | |vf(s)| |sf(s)| |
| ------- ----/---- ---/----- ------- ---/--- ---/--- |
| | pf0 |______/________/ | pf1 |___/_______/ |
| ------- ------- |
| |
| local controller_num=0 (eswitch) |
---------------------------------------------------------
An example devlink port for external controller with controller
number = 1 for a VF 1 of PF 0:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0pf0vf1",
"flavour": "pcivf",
"controller": 1,
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A devlink eswitch port may represent PCI PF/VF ports of a controller.
A controller either located on same system or it can be an external
controller located in host where such NIC is plugged in.
Add the ability for driver to specify if a port is for external
controller.
Use such flag in the mlx5_core driver.
An example of an external controller having VF1 of PF0 belong to
controller 1.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0pf0vf1",
"flavour": "pcivf",
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Rewrite inner header IPv6 in ICMPv6 messages in ip6t_NPT,
from Michael Zhou.
2) do_ip_vs_set_ctl() dereferences uninitialized value,
from Peilin Ye.
3) Support for userdata in tables, from Jose M. Guisado.
4) Do not increment ct error and invalid stats at the same time,
from Florian Westphal.
5) Remove ct ignore stats, also from Florian.
6) Add ct stats for clash resolution, from Florian Westphal.
7) Bump reference counter bump on ct clash resolution only,
this is safe because bucket lock is held, again from Florian.
8) Use ip_is_fragment() in xt_HMARK, from YueHaibing.
9) Add wildcard support for nft_socket, from Balazs Scheidler.
10) Remove superfluous IPVS dependency on iptables, from
Yaroslav Bolyukin.
11) Remove unused definition in ebt_stp, from Wang Hai.
12) Replace CONFIG_NFT_CHAIN_NAT_{IPV4,IPV6} by CONFIG_NFT_NAT
in selftests/net, from Fabian Frederick.
13) Add userdata support for nft_object, from Jose M. Guisado.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The last 2 generations of Lenovo Thinkpads send an acpi_thinkpad event when
Fn + right shift is pressed. This is intended for use with "Lenovo Quick
Clean" software, which disables the touchpad + kbd for 2 minutes on this
key-combo so that healthcare workes can disinfect it.
But there is no silkscreen print on the right-keyboard to indicate this,
so add a KEY_FN_RIGHT_SHIFT keycode define to use for this key-combo.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200908135147.4044-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1
models have 3 new symbols / shortcuts on their F9-F11 keys (and the
thinkpad_acpi driver receives 3 new "scancodes" for these):
F9: Has a symbol resembling a rectangular speech balloon, the manual says
the hotkey functions shows or hides the notification center
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Decline incoming calls"
We have no existing keycodes which are a good match for these, so
add 3 new keycodes for these.
I noticed that we have a hole in our keycodes between 0x1ba and 0x1c0
which does not seem to be reserved for any specific purpose, so these
new 3 codes use 0x1bc - 0x1be, instead of starting at 0x27b.
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enables storing userdata for nft_object. Initially this will store an
optional comment but can be extended in the future as needed.
Adds new attribute NFTA_OBJ_USERDATA to nft_object.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch is born out of an investigation into which IEEE statistics
correspond to which struct rtnl_link_stats64 members. Turns out that
there seems to be reasonable consensus on the matter, among many drivers.
To save others the time (and it took more time than I'm comfortable
admitting) I'm adding comments referring to IEEE attributes to
struct rtnl_link_stats64.
Up until now we had two forms of documentation for stats - in
Documentation/ABI/testing/sysfs-class-net-statistics and the comments
on struct rtnl_link_stats64 itself. While the former is very cautious
in defining the expected behavior, the latter feel quite dated and
may not be easy to understand for modern day driver author
(e.g. rx_over_errors). At the same time modern systems are far more
complex and once obvious definitions lost their clarity. For example
- does rx_packet count at the MAC layer (aFramesReceivedOK)?
packets processed correctly by hardware? received by the driver?
or maybe received by the stack?
I tried to clarify the expectations, further clarifications from
others are very welcome.
The part hardest to untangle is rx_over_errors vs rx_fifo_errors
vs rx_missed_errors. After much deliberation I concluded that for
modern HW only two of the counters will make sense. The distinction
between internal FIFO overflow and packets dropped due to back-pressure
from the host is likely too implementation (driver and device) specific
to expose in the standard stats.
Now - which two of those counters we select to use is anyone's pick:
sysfs documentation suggests rx_over_errors counts packets which
did not fit into buffers due to MTU being too small, which I reused.
There don't seem to be many modern drivers using it (well, CAN drivers
seem to love this statistic).
Of the remaining two I picked rx_missed_errors to report device drops.
bnxt reports it and it's folded into "drop"s in procfs (while
rx_fifo_errors is an error, and modern devices usually receive the frame
OK, they just can't admit it into the pipeline).
Of the drivers I looked at only AMD Lance-like and NS8390-like use all
three of these counters. rx_missed_errors counts missed frames,
rx_over_errors counts overflow events, and rx_fifo_errors counts frames
which were truncated because they didn't fit into buffers. This suggests
that rx_fifo_errors may be the correct stat for truncated packets, but
I'd think a FIFO stat counting truncated packets would be very confusing
to a modern reader.
v2:
- add driver developer notes about ethtool stat count and reset
- replace Ethernet with IEEE 802.3 to better indicate source of attrs
- mention byte counters don't count FCS
- clarify RX counter is from device to host
- drop "sightly" from sysfs paragraph
- add examples of ethtool stats
- s/incoming/received/ s/incoming/transmitted/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support per port group src list (address and timer) and filter mode
dumping. Protected by either multicast_lock or rcu.
v3: add IPv6 support
v2: require RCU or multicast_lock to traverse src groups
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IRG, ADDG and SUBG instructions insert a random tag in the resulting
address. Certain tags can be excluded via the GCR_EL1.Exclude bitmap
when, for example, the user wants a certain colour for freed buffers.
Since the GCR_EL1 register is not accessible at EL0, extend the
prctl(PR_SET_TAGGED_ADDR_CTRL) interface to include a 16-bit field in
the first argument for controlling which tags can be generated by the
above instruction (an include rather than exclude mask). Note that by
default all non-zero tags are excluded. This setting is per-thread.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
By default, even if PROT_MTE is set on a memory range, there is no tag
check fault reporting (SIGSEGV). Introduce a set of option to the
exiting prctl(PR_SET_TAGGED_ADDR_CTRL) to allow user control of the tag
check fault mode:
PR_MTE_TCF_NONE - no reporting (default)
PR_MTE_TCF_SYNC - synchronous tag check fault reporting
PR_MTE_TCF_ASYNC - asynchronous tag check fault reporting
These options translate into the corresponding SCTLR_EL1.TCF0 bitfield,
context-switched by the kernel. Note that the kernel accesses to the
user address space (e.g. read() system call) are not checked if the user
thread tag checking mode is PR_MTE_TCF_NONE or PR_MTE_TCF_ASYNC. If the
tag checking mode is PR_MTE_TCF_SYNC, the kernel makes a best effort to
check its user address accesses, however it cannot always guarantee it.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Introduce PIDFD_NONBLOCK to support non-blocking pidfd file descriptors.
Ever since the introduction of pidfds and more advanced async io various
programming languages such as Rust have grown support for async event
libraries. These libraries are created to help build epoll-based event loops
around file descriptors. A common pattern is to automatically make all file
descriptors they manage to O_NONBLOCK.
For such libraries the EAGAIN error code is treated specially. When a function
is called that returns EAGAIN the function isn't called again until the event
loop indicates the the file descriptor is ready. Supporting EAGAIN when
waiting on pidfds makes such libraries just work with little effort. In the
following patch we will extend waitid() internally to support non-blocking
pidfds.
This introduces a new flag PIDFD_NONBLOCK that is equivalent to O_NONBLOCK.
This follows the same patterns we have for other (anon inode) file descriptors
such as EFD_NONBLOCK, IN_NONBLOCK, SFD_NONBLOCK, TFD_NONBLOCK and the same for
close-on-exec flags.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/lkml/20200811181236.GA18763@localhost/
Link: https://github.com/joshtriplett/async-pidfd
Link: https://lore.kernel.org/r/20200902102130.147672-2-christian.brauner@ubuntu.com
Expose all exisiting inet sockopt bits through inet_diag for debug purpose.
Corresponding changes in iproute2 ss will be submitted to output all
these values.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a8212028 ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf20 ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds encoders standard v4l2 control for frame-skip. The control
is a copy of a custom encoder control so that other v4l2 encoder
drivers can use it.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
