On TGL the blending of all the streams have moved from DDI to
transcoder, so now every transcoder working over the same MST port must
send its stream to a master transcoder and master will send to DDI
respecting the time slots.
So here adding all the CRTCs that shares the same MST stream if
needed and computing their state again, it will pick the lowest
pipe/transcoder among the ones in the same stream to be master.
Most of the time skl_commit_modeset_enables() enables pipes in a
crescent order but due DDB overlapping it might not happen, this
scenarios will be handled in the next patch.
v2:
- Using recently added intel_crtc_state_reset() to set
mst_master_transcoder to invalid transcoder for all non gen12 & MST
code paths
- Setting lowest pipe/transcoder as master, previously it was the
first one but setting a predictable one will help in future MST e
port sync integration
- Moving to intel type as much as we can
v3:
- Now intel_dp_mst_master_trans_compute() returns the MST master transcoder
- Replaced stdbool.h by linux/types.h
- Skip the connector being checked in
intel_dp_mst_atomic_master_trans_check()
- Using pipe instead of transcoder to compute MST master
v4:
- renamed connector_state to conn_state
v5:
- Improved the parameters of intel_dp_mst_master_trans_compute() to
simply code
- Added call drm_atomic_add_affected_planes() in
intel_dp_mst_atomic_master_trans_check() as helper could not do it
for us
- Removed "if (ret)" left over from v3 changes
v6:
- handled ret == I915_MAX_PIPES case in compute
BSpec: 50493
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-2-jose.souza@intel.com
Move all of haswell_crtc_disable() into the encoder
.post_disable() hooks. Now we're left with just
calling the .disable() and .post_disable() hooks
back to back.
I chose to move the code into the .post_disable() hook instead
of the .disable() hook as most of the sequence is currently
implemented in the .post_disable() hook.
We should collapse it all down to just one hook and then the
encoders can drive the modeset sequence fully. But that may
need some further refactoring as we currently call the
ddi .post_disable() hook from mst code and we can't just
replace that with a call to the ddi .disable() hook.
Should also follow up with similar treatment for the enable
sequence but let's start here where it's easier.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
For TGL the step to turn off the transcoder clock was moved to after
the complete shutdown of DDI. Only the MST slave transcoders should
disable the clock before that.
v2:
- Adding last_mst_stream to intel_mst_post_disable_dp, make code more
easy to read and is similar to first_mst_stream in
intel_mst_pre_enable_dp()(Ville's idea)
- Calling intel_ddi_disable_pipe_clock() for GEN12+ right
intel_disable_ddi_buf() as stated in BSpec(Ville)
BSpec: 49190
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205210350.96795-2-jose.souza@intel.com
Backmerge to get dfce90259d ("Backmerge i915 security patches from
commit 'ea0b163b13ff' into drm-next") and thus 100d46bd72 ("Merge
Intel Gen8/Gen9 graphics fixes from Jon Bloomfield.").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- Make context persistence optional
Allow userspace to tie the context lifetime to FD lifetime,
effectively allowing Ctrl-C killing of a process to also clean
up the hardware immediately.
Compute changes: https://github.com/intel/compute-runtime/pull/228
The compute driver is shipping in Ubuntu. uAPI acked by Mesa folks.
- Put future HW and their uAPIs under STAGING & BROKEN
Introduces DRM_I915_UNSTABLE Kconfig menu for working on the new
uAPI for future HW in upstream. We already disable driver loading
by default the platform is deemed ready. This is a second level
of protection based on compile time switch (STAGING & BROKEN).
- Under DRM_I915_UNSTABLE: Add the fake lmem region on iGFX
Fake local memory region on integrated GPU through cmdline:
memmap=2G$16G i915.fake_lmem_start=0x400000000
Currently allows testing non-mappable GGTT behavior and running
kernel selftest for local memory.
Driver Changes:
- Fix Bugzilla #112084: VGA external monitor not working (Ville)
- Add support for half float framebuffers (Ville)
- Add perf support on TGL (Lionel)
- Replace hangcheck by heartbeats (Chris)
- Allow SPT PCH on all AML devices (James)
- Add new CNL PCH for CML platform (Imre)
- Allow 100 ms (Kconfig) for workloads to exit before reset (Chris, Jon, Joonas)
- Forcibly pre-empt a context after 100 ms (Kconfig) of delay (Chris)
- Make timeslice duration Kconfig configurable (Chris)
- Whitelist PS_(DEPTH|INVOCATION)_COUNT for Tigerlake (Tapani)
- Support creating LMEM objects in kernel (Matt A)
- Adjust the location of RING_MI_MODE in the context image for TGL (Chris)
- Handle AUX interrupts for TC ports (Matt R)
- Add support for devices without mappable GGTT aperture (Daniele)
- Rename "inject_load_failure" module parameter to "inject_probe_failure" (Janusz)
- Handle fused off HDCP, FBC, DMC and DSC (Jose)
- Add support to one DP-MST stream on Tigerlake (Lucas)
- Add HuC firmware (and GuC) for TGL (Daniele)
- Allow ICL+ DSI on any pipe (Ville)
- Check some transcoder timing minimum limits (Ville)
- Don't set queue_priority_hint if we don't kick the submission (Chris)
- Introduce barrier pulses along engines to flush idle/in-flight requests (Chris)
- Drop assertion that ce->pin_mutex guards state updates (Chris)
- Cancel banned contexts on schedule-out (Chris)
- Cancel contexts when hangchecking is disabled (Chris)
- Catch GTT fault errors for gen11+ planes (Matt R)
- Print in debugfs if PSR is not enabled because of sink (Jose)
- Do not set MOCS control values on dgfx (Lucas)
- Setup io-mapping for LMEM (Abdiel)
- Support kernel mapping of LMEM objects (Abdiel)
- Add LMEM selftests (Matt A)
- Initialise PMU spinlock before registering (Chris)
- Clear DKL_TX_PMD_LANE_SUS before program TC voltage swing (Jose)
- Flip interpretation of ips fmin/fmax to max rps (Chris)
- Add VBT compression parameter block definition (Jani)
- Limit the blitter sizes to ensure low preemption latency (Chris)
- Fixup block_size rounding on BLT (Matt A)
- Don't try to place HWS in non-existing mappable region (Michal Wa)
- Don't allocate the ring in stolen if we lack aperture (Matt A)
- Add AUX B & C to DC_OFF_POWER_DOMAINS for Tigerlake (Matt R)
- Avoid HPD poll detect triggering a new detect cycle (Imre)
- Document the userspace fail with possible_crtcs (Ville)
- Drop lrc header page now unused by GuC (Daniele)
- Do not switch aux to TBT mode for non-TC ports (Jose)
- Restructure code to avoid depending on i915 but smaller structs (Chris, Tvrtko, Andi)
- Remove pm park/unpark notifications (Chris)
- Avoid lockdep cross-contamination between object types (Chris)
- Restructure DSC code (Jani)
- Fix dead locking in early workload shadow (Zhenyu)
- Split the legacy submission backend from the common CS ring buffer (Chris)
- Move intel_engine_context_in/out into intel_lrc.c (Tvrtko)
- Describe perf/wakeref structure members in documentation (Anna)
- Update renamed header files names in documentation (Anna)
- Add debugs to distingiush a cd2x update from a full cdclk pll update (Ville)
- Rework atomic global state locking (Ville)
- Allow planes to declare their minimum acceptable cdclk (Ville)
- Eliminate skl_check_pipe_max_pixel_rate() and simplify skl_max_scale() (Ville)
- Making loglevel of PSR2/SU logs same (Ap)
- Capture aux page table error register (Lionel)
- Add is_dgfx to device info (Jose)
- Split gen11_irq_handler to make it shareable (Lucas)
- Encapsulate kconfig constant values inside boolean predicates (Chris)
- Split memory_region initialisation into its own file (Chris)
- Use _PICK() for CHICKEN_TRANS() and add CHICKEN_TRANS_D (Ville)
- Add perf helper macros for comparing with whitelisted registers (Umesh)
- Fix i915_inject_load_error() name to read *_probe_* (Janusz)
- Drop unused AUX register offsets (Matt R)
- Provide more information on DP AUX failures (Matt R)
- Add GAM/SFC instdone to error state (Mika)
- Always track callers to intel_rps_mark_interactive() (Chris)
- Nuke 'mode' argument to intel_get_load_detect_pipe() (Ville)
- Simplify LVDS crtc_mask and pipe_mask setup (Ville)
- Stop frobbing crtc->base.mode (Ville)
- Do s/crtc_mask/pipe_mask/ (Ville)
- Split detaching and removing the vma (Chris)
- Selftest improvements (Chris, Tvrtko, Mika, Matt A, Lionel)
- GuC code improvements (Rob, Andi, Daniele)
- Check against i915_selftest only under CONFIG_SELFTEST (Chris)
- Refine occupancy test in kill_context() (Chris)
- Start kthreads before stopping (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101104718.GA14323@jlahtine-desk.ger.corp.intel.com
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.
When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:
- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector
Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.
So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:
&drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:
&kn->count
-> &drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.
Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.
So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.
For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.
Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.
With that, we finally have well defined locking.
Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
before this patch.
* Just throw out ports that get changed from an output to an input, and
replace them with new ports. This lets us ensure that modesetting
contexts never see port->connector go from having a connector to being
NULL.
* Write an extremely detailed explanation of what problems this is
trying to fix, since there's a _lot_ of context here and I honestly
forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
drm_dp_mst_handle_link_address_port(). It's not needed.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-7-lyude@redhat.com
There was a integer wraparound when mode_clock became too high,
and we didn't correct for the FEC overhead factor when dividing,
with the calculations breaking at HBR3.
As a result our calculated bpp was way too high, and the link width
limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just
in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%,
all the calculations use 1/0.972261, and the same ratio should be
applied to data M/N as well, so use it there when FEC is enabled.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
Changes since v4:
- Use the correct register for icl. (Ville)
- Split hw readout to a separate patch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d9218c8f6c ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tiger Lake has up to 4 pipes so the mask would need to be 0xf instead of
0x7. Do not hardcode the mask so it allows the fake MST encoders to
connect to all pipes no matter how many the platform has.
Iterating over all pipes to keep consistent with intel_ddi_init().
Initialy this patch was replaced by commit 4eaceea3a0 ("drm/i915:
Fix DP-MST crtc_mask") but userspace it not correctly using
encoder.possible_crtcs and it was reverted by
commit e838bfa8e1 ("Revert "drm/i915: Fix DP-MST crtc_mask"")
Userspace should be fixed but it might take a while, so bringing this
patch back for now.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-2-jose.souza@intel.com
Gen 12 onwards moves the DP_TP_* registers to be transcoder-based rather
than port-based. This adds the new register addresses and changes all
the callers to use the register saved in intel_dp->regs.*. This is
filled out when preparing to enable the port so we take into account if
we should use the transcoder or the port.
v2: reimplement by stashing the registers we want to access under
intel_dp->reg. Now they are initialized when enabling the port.
Ville suggested to store the transcoder to be used exclusively
by TGL+. After implementing I thought just storing the register directly
made it cleaner.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-5-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
We're not allowed to create new properties after device registration
so for MST connectors we need to either create the max_bpc property
earlier, or we reuse one we already have. Let's do the latter apporach
since the corresponding SST connector already has the prop and its
min/max are correct also for the MST connector.
The problem was highlighted by commit 4f5368b554 ("drm/kms:
Catch mode_object lifetime errors") which results in the following
spew:
[ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm]
...
[ 1330.879008] Call Trace:
[ 1330.879023] drm_property_create+0xba/0x180 [drm]
[ 1330.879036] drm_property_create_range+0x15/0x30 [drm]
[ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm]
[ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915]
[ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper]
...
Cc: stable@vger.kernel.org
Cc: Lyude Paul <lyude@redhat.com>
Cc: sunpeng.li@amd.com
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Fixes: 5ca0ef8a56 ("drm/i915: Add max_bpc property for DP MST")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Features:
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)
Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)
Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v9x1lpdh.fsf@intel.com
