Pull media fixes from Mauro Carvalho Chehab:
- fix a regression on tvp5150 causing failures at input selection and
image glitches
- CEC was moved out of staging for v4.10. Fix some bugs on it while not
too late
- fix a regression on pctv452e caused by VM stack changes
- fix suspend issued with smiapp
- fix a regression on cobalt driver
- fix some warnings and Kconfig issues with some random configs.
* tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5k4ecgx: select CRC32 helper
[media] dvb: avoid warning in dvb_net
[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
[media] v4l: tvp5150: Fix comment regarding output pin muxing
[media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
[media] pctv452e: move buffer to heap, no mutex
[media] media/cobalt: use pci_irq_allocate_vectors
[media] cec: fix race between configuring and unconfiguring
[media] cec: move cec_report_phys_addr into cec_config_thread_func
[media] cec: replace cec_report_features by cec_fill_msg_report_features
[media] cec: update log_addr[] before finishing configuration
[media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
[media] cec: when canceling a message, don't overwrite old status info
[media] cec: fix report_current_latency
[media] smiapp: Make suspend and resume functions __maybe_unused
[media] smiapp: Implement power-on and power-off sequences without runtime PM
Marc Kleine-Budde says:
====================
pull-request: can-next 2017-01-24
this is a pull request of 4 patches for net-next/master.
The first patch by Oliver Hartkopp adds a netlink API to configure the
interface termination of a CAN card. The next two patches are by me and
add a netlink API to query and configure CAN interfaces that only
support fixed bitrates. The last patch by Colin Ian King simplifies the
return path in the softing_cs driver's softingcs_probe() function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change History
--------------
v4: Changes suggested by Emil, Christian
- return -ENODATA for asics with unlimited sessions
v3: changes suggested by Christian
- Add a check for UVD IP block using AMDGPU_HW_IP_UVD
query type.
- Add a check for asic_type to be less than
CHIP_POLARIS10 since starting Polaris, we support
unlimited UVD instances.
- Add kerneldoc style comment for
amdgpu_uvd_used_handles().
v2: as suggested by Christian
- Add a new query AMDGPU_INFO_NUM_HANDLES
- Create a helper function to return the number
of currently used UVD handles.
- Modify the logic to count the number of used
UVD handles since handles can be freed in
non-linear fashion.
v1:
- User might want to query the maximum number of UVD
instances supported by firmware. In addition to that,
if there are multiple applications using UVD handles
at the same time, he might also want to query the
currently used number of handles.
For this we add two variables max_handles and
used_handles inside drm_amdgpu_info_hw_ip. So now
an application (or libdrm) can use AMDGPU_INFO IOCTL
with AMDGPU_INFO_HW_IP_INFO query type to get these
values.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The address generation mode for IPv6 link-local can only be configured
by netlink messages. This patch adds the ability to change the address
generation mode via sysctl.
v1 -> v2
Removed the rtnl lock and switch to use RCU lock to iterate through
the netdev list.
v2 -> v3
Removed the addrgenmode variable from the idev structure and use the
systcl storage for the flag.
Simplifed the logic for sysctl handling by removing the supported
for all operation.
Added support for more types of tunnel interfaces for link-local
address generation.
Based the patches from net-next.
v3 -> v4
Removed unnecessary whitespace changes.
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff
* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
drm: qxl: Open code teardown function for qxl
drm: qxl: Open code probing sequence for qxl
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm: vc4: use crtc helper drm_crtc_from_index()
drm: tegra: use crtc helper drm_crtc_from_index()
drm: nouveau: use crtc helper drm_crtc_from_index()
drm: mediatek: use crtc helper drm_crtc_from_index()
drm: kirin: use crtc helper drm_crtc_from_index()
drm: exynos: use crtc helper drm_crtc_from_index()
dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
drm: bridge: dw-hdmi: Detect PHY type at runtime
drm: bridge: dw-hdmi: Handle overflow workaround based on device version
...
Final block of feature work for 4.11:
- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
(Libin)
- huc loading support, including uapi for libva to use it (Anusha
Srivatsa)
* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
drm/i915: Update DRIVER_DATE to 20170123
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Assert that created vma has a whole number of pages
drm/i915: Assert the drm_mm_node is allocated when on the VM lists
drm/i915: Treat an error from i915_vma_instance() as unlikely
drm/i915: Reject vma creation larger than address space
drm/i915: Use common LRU inactive vma bumping for unpin_from_display
drm/i915: Do an unlocked wait before set-cache-level ioctl
drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
drm/i915/huc: Avoid attempting to authenticate non-existent fw
drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
drm/i915: Release temporary load-detect state upon switching
drm/i915: Remove i915_gem_object_to_ggtt()
drm/i915: Remove i915_vma_create from VMA API
drm/i915: Add a check that the VMA instance we lookup matches the request
drm/i915: Rename some warts in the VMA API
drm/i915: Track pinned vma in intel_plane_state
drm/i915/get_params: Add HuC status to getparams
...
Backmerge Linus master to get the connector locking revert.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
Revert "drm/probe-helpers: Drop locking from poll_enable"
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
...
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- ignore self-generated loop detect MAC addresses in translation table,
by Simon Wunderlich
- install uapi batman_adv.h header, by Sven Eckelmann
- bump copyright years, by Sven Eckelmann
- Remove an unused variable in translation table code, by Sven Eckelmann
- Handle NET_XMIT_CN like NET_XMIT_SUCCESS (revised according to Davids
suggestion), and a follow up code clean up, by Gao Feng (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains a large batch with Netfilter fixes for
your net tree, they are:
1) Two patches to solve conntrack garbage collector cpu hogging, one to
remove GC_MAX_EVICTS and another to look at the ratio (scanned entries
vs. evicted entries) to make a decision on whether to reduce or not
the scanning interval. From Florian Westphal.
2) Two patches to fix incorrect set element counting if NLM_F_EXCL is
is not set. Moreover, don't decrenent set->nelems from abort patch
if -ENFILE which leaks a spare slot in the set. This includes a
patch to deconstify the set walk callback to update set->ndeact.
3) Two fixes for the fwmark_reflect sysctl feature: Propagate mark to
reply packets both from nf_reject and local stack, from Pau Espin Pedrol.
4) Fix incorrect handling of loopback traffic in rpfilter and nf_tables
fib expression, from Liping Zhang.
5) Fix oops on stateful objects netlink dump, when no filter is specified.
Also from Liping Zhang.
6) Fix a build error if proc is not available in ipt_CLUSTERIP, related
to fix that was applied in the previous batch for net. From Arnd Bergmann.
7) Fix lack of string validation in table, chain, set and stateful
object names in nf_tables, from Liping Zhang. Moreover, restrict
maximum log prefix length to 127 bytes, otherwise explicitly bail
out.
8) Two patches to fix spelling and typos in nf_tables uapi header file
and Kconfig, patches from Alexander Alemayhu and William Breathitt Gray.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
09748a22f4 ("batman-adv: add generic netlink family for batman-adv")
introduced the new batman_adv.h which describes the netlink attributes and
commands of batman-adv. But the Kbuild entry to install the header was not
added.
All currently known tools ship their own copy of batman_adv.h but it should
be installed anyway to later be able to migrate to the system batman_adv.h.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This patch adds a new socket option, TCP_FASTOPEN_CONNECT, as an
alternative way to perform Fast Open on the active side (client). Prior
to this patch, a client needs to replace the connect() call with
sendto(MSG_FASTOPEN). This can be cumbersome for applications who want
to use Fast Open: these socket operations are often done in lower layer
libraries used by many other applications. Changing these libraries
and/or the socket call sequences are not trivial. A more convenient
approach is to perform Fast Open by simply enabling a socket option when
the socket is created w/o changing other socket calls sequence:
s = socket()
create a new socket
setsockopt(s, IPPROTO_TCP, TCP_FASTOPEN_CONNECT …);
newly introduced sockopt
If set, new functionality described below will be used.
Return ENOTSUPP if TFO is not supported or not enabled in the
kernel.
connect()
With cookie present, return 0 immediately.
With no cookie, initiate 3WHS with TFO cookie-request option and
return -1 with errno = EINPROGRESS.
write()/sendmsg()
With cookie present, send out SYN with data and return the number of
bytes buffered.
With no cookie, and 3WHS not yet completed, return -1 with errno =
EINPROGRESS.
No MSG_FASTOPEN flag is needed.
read()
Return -1 with errno = EWOULDBLOCK/EAGAIN if connect() is called but
write() is not called yet.
Return -1 with errno = EWOULDBLOCK/EAGAIN if connection is
established but no msg is received yet.
Return number of bytes read if socket is established and there is
msg received.
The new API simplifies life for applications that always perform a write()
immediately after a successful connect(). Such applications can now take
advantage of Fast Open by merely making one new setsockopt() call at the time
of creating the socket. Nothing else about the application's socket call
sequence needs to change.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
mlx5-updates-2017-24-01
The first seven patches from Or Gerlitz in this series further enhances
the mlx5 SRIOV switchdev mode to support offloading IPv6 tunnels using the
TC tunnel key set (encap) and unset (decap) actions.
Or Gerlitz says:
========================
As part of doing this change, few cleanups are done in the IPv4 code,
later we move to use the full tunnel key info provided to the driver as
the key for our internal hashing which is used to identify cases where
the same tunnel is used for encapsulating multiple flows. As done in the
IPv4 case, the control path for offloading IPv6 tunnels uses route/neigh
lookups and construction of the IPv6 tunnel headers on the encap path and
matching on the outer hears in the decap path.
The last patch of the series enlarges the HW FDB size for the switchdev mode,
so it has now room to contain offloaded flows as many as min(max number
of HW flow counters supported, max HW table size supported).
========================
Next to Or's series you can find several patches handling several topics.
From Mohamad, add support for SRIOV VF min rate guarantee by using the
TSAR BW share weights mechanism.
From Or, Two patches to enable Eth VFs to query their min-inline value for
user-space.
for that we move a mlx5 low level min inline helper function from mlx5
ethernet driver into the core driver and then use it in mlx5_ib to expose
the inline mode to rdma applications through libmlx5.
From Kamal Heib, Reduce memory consumption on kdump kernel.
From Shaker Daibes, code reuse in CQE compression control logic
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce optional 128-bit action cookie.
Like all other cookie schemes in the networking world (eg in protocols
like http or existing kernel fib protocol field, etc) the idea is to save
user state that when retrieved serves as a correlator. The kernel
_should not_ intepret it. The user can store whatever they wish in the
128 bits.
Sample exercise(showing variable length use of cookie)
.. create an accept action with cookie a1b2c3d4
sudo $TC actions add action ok index 1 cookie a1b2c3d4
.. dump all gact actions..
sudo $TC -s actions ls action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 0 installed 5 sec used 5 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie a1b2c3d4
.. bind the accept action to a filter..
sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 1
... send some traffic..
$ ping 127.0.0.1 -c 3
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.020 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.027 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms
Signed-off-by: David S. Miller <davem@davemloft.net>
Linux 4.9 added two ioctl() operations that can be used to discover:
* the parental relationships for hierarchical namespaces (user and PID)
[NS_GET_PARENT]
* the user namespaces that owns a specified non-user-namespace
[NS_GET_USERNS]
For no good reason that I can glean, NS_GET_USERNS was made synonymous
with NS_GET_PARENT for user namespaces. It might have been better if
NS_GET_USERNS had returned an error if the supplied file descriptor
referred to a user namespace, since it suggests that the caller may be
confused. More particularly, if it had generated an error, then I wouldn't
need the new ioctl() operation proposed here. (On the other hand, what
I propose here may be more generally useful.)
I would like to write code that discovers namespace relationships for
the purpose of understanding the namespace setup on a running system.
In particular, given a file descriptor (or pathname) for a namespace,
N, I'd like to obtain the corresponding user namespace. Namespace N
might be a user namespace (in which case my code would just use N) or
a non-user namespace (in which case my code will use NS_GET_USERNS to
get the user namespace associated with N). The problem is that there
is no way to tell the difference by looking at the file descriptor
(and if I try to use NS_GET_USERNS on an N that is a user namespace, I
get the parent user namespace of N, which is not what I want).
This patch therefore adds a new ioctl(), NS_GET_NSTYPE, which, given
a file descriptor that refers to a user namespace, returns the
namespace type (one of the CLONE_NEW* constants).
Signed-off-by: Michael Kerrisk <mtk-manpages@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127,
at nf_log_packet(), so the extra part is useless.
Second, after adding a log rule with a very very long prefix, we will
fail to dump the nft rules after this _special_ one, but acctually,
they do exist. For example:
# name_65000=$(printf "%0.sQ" {1..65000})
# nft add rule filter output log prefix "$name_65000"
# nft add rule filter output counter
# nft add rule filter output counter
# nft list chain filter output
table ip filter {
chain output {
type filter hook output priority 0; policy accept;
}
}
So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When programs need to calculate the csum from scratch for small UDP
packets and use bpf_l4_csum_replace() to feed the result from helpers
like bpf_csum_diff(), then we need a flag besides BPF_F_MARK_MANGLED_0
that would ignore the case of current csum being 0, and which would
still allow for the helper to set the csum and transform when needed
to CSUM_MANGLED_0.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some mlx5 HW models (CX4, CX4Lx), the VF driver needs to put part
of the packet headers on the TX descriptor so the e-switch can do proper
matching and steering. This is called "min-inline", it's advertized to
the VF by the FW and also enforced on them by the HW, such that if they
don't obey, their packets are dropped.
SRIOV VF libmlx5 instances should take into account the min-inline
value of their vports. For that end, we provide this value through
the vendor response part of init_ucontext command.
The min inline value is reported in a way which will let newer libmlx5
instances realize that they are running over an older kernel and act
accordingly (e.g apply some educated guess).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This action allows the user to sample traffic matched by tc classifier.
The sampling consists of choosing packets randomly and sampling them using
the psample module. The user can configure the psample group number, the
sampling rate and the packet's truncation (to save kernel-user traffic).
Example:
To sample ingress traffic from interface eth1, one may use the commands:
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff: \
matchall action sample rate 12 group 4
Where the first command adds an ingress qdisc and the second starts
sampling randomly with an average of one sampled packet per 12 packets on
dev eth1 to psample group 4.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a general way for kernel modules to sample packets, without being tied
to any specific subsystem. This netlink channel can be used by tc,
iptables, etc. and allow to standardize packet sampling in the kernel.
For every sampled packet, the psample module adds the following metadata
fields:
PSAMPLE_ATTR_IIFINDEX - the packets input ifindex, if applicable
PSAMPLE_ATTR_OIFINDEX - the packet output ifindex, if applicable
PSAMPLE_ATTR_ORIGSIZE - the packet's original size, in case it has been
truncated during sampling
PSAMPLE_ATTR_SAMPLE_GROUP - the packet's sample group, which is set by the
user who initiated the sampling. This field allows the user to
differentiate between several samplers working simultaneously and
filter packets relevant to him
PSAMPLE_ATTR_GROUP_SEQ - sequence counter of last sent packet. The
sequence is kept for each group
PSAMPLE_ATTR_SAMPLE_RATE - the sampling rate used for sampling the packets
PSAMPLE_ATTR_DATA - the actual packet bits
The sampled packets are sent to the PSAMPLE_NL_MCGRP_SAMPLE multicast
group. In addition, add the GET_GROUPS netlink command which allows the
user to see the current sample groups, their refcount and sequence number.
This command currently supports only netlink dump mode.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implements an optional, per bridge port flag and feature to deliver
multicast packets to any host on the according port via unicast
individually. This is done by copying the packet per host and
changing the multicast destination MAC to a unicast one accordingly.
multicast-to-unicast works on top of the multicast snooping feature of
the bridge. Which means unicast copies are only delivered to hosts which
are interested in it and signalized this via IGMP/MLD reports
previously.
This feature is intended for interface types which have a more reliable
and/or efficient way to deliver unicast packets than broadcast ones
(e.g. wifi).
However, it should only be enabled on interfaces where no IGMPv2/MLDv1
report suppression takes place. This feature is disabled by default.
The initial patch and idea is from Felix Fietkau.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[linus.luessing@c0d3.blue: various bug + style fixes, commit message]
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some CAN interfaces only support fixed fixed bitrates. This patch adds a
netlink interface to get the list of the CAN interface's fixed bitrates and
data bitrates.
Inside the driver arrays of supported data- bitrate values are defined.
const u32 drvname_bitrate[] = { 20000, 50000, 100000 };
const u32 drvname_data_bitrate[] = { 200000, 500000, 1000000 };
struct drvname_priv *priv;
priv = netdev_priv(dev);
priv->bitrate_const = drvname_bitrate;
priv->bitrate_const_cnt = ARRAY_SIZE(drvname_bitrate);
priv->data_bitrate_const = drvname_data_bitrate;
priv->data_bitrate_const_cnt = ARRAY_SIZE(drvname_data_bitrate);
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds a netlink interface to configure the CAN bus termination of
CAN interfaces.
Inside the driver an array of supported termination values is defined:
const u16 drvname_termination[] = { 60, 120, CAN_TERMINATION_DISABLED };
struct drvname_priv *priv;
priv = netdev_priv(dev);
priv->termination_const = drvname_termination;
priv->termination_const_cnt = ARRAY_SIZE(drvname_termination);
priv->termination = CAN_TERMINATION_DISABLED;
And the funtion to set the value has to be defined:
priv->do_set_termination = drvname_set_termination;
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This trie implements a longest prefix match algorithm that can be used
to match IP addresses to a stored set of ranges.
Internally, data is stored in an unbalanced trie of nodes that has a
maximum height of n, where n is the prefixlen the trie was created
with.
Tries may be created with prefix lengths that are multiples of 8, in
the range from 8 to 2048. The key used for lookup and update operations
is a struct bpf_lpm_trie_key, and the value is a uint64_t.
The code carries more information about the internal implementation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
omapdrm changes for 4.11
The main change here is the IRQ code cleanup, which gives us properly working
vblank counts and timestamps. We also get much less calls to runtime PM gets &
puts.
* tag 'omapdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (26 commits)
drm/omap: panel-sony-acx565akm.c: Add MODULE_ALIAS
drm/omap: dsi: fix compile errors when enabling debug prints
drm: omapdrm: Perform initialization/cleanup at probe/remove time
drm: Move vblank cleanup from unregister to release
drm: omapdrm: Use sizeof(*var) instead of sizeof(type) for structures
drm: omapdrm: Remove global variables
drm: omapdrm: Simplify IRQ wait implementation
drm: omapdrm: Inline the pipe2vbl function
drm: omapdrm: Don't call DISPC power handling in IRQ wait functions
drm: omapdrm: Remove unused parameter from omap_drm_irq handler
drm: omapdrm: Don't expose the omap_irq_(un)register() functions
drm: omapdrm: Keep vblank interrupt enabled while CRTC is active
drm: omapdrm: Use a spinlock to protect the CRTC pending flag
drm: omapdrm: Prevent processing the same event multiple times
drm: omapdrm: Check the CRTC software state at enable/disable time
drm: omapdrm: Let the DRM core skip plane commit on inactive CRTCs
drm: omapdrm: Replace DSS manager state check with omapdrm CRTC state
drm: omapdrm: Handle OCP error IRQ directly
drm: omapdrm: Handle CRTC error IRQs directly
drm: omapdrm: Handle FIFO underflow IRQs internally
...
If the bearer carrying multicast messages supports broadcast, those
messages will be sent to all cluster nodes, irrespective of whether
these nodes host any actual destinations socket or not. This is clearly
wasteful if the cluster is large and there are only a few real
destinations for the message being sent.
In this commit we extend the eligibility of the newly introduced
"replicast" transmit option. We now make it possible for a user to
select which method he wants to be used, either as a mandatory setting
via setsockopt(), or as a relative setting where we let the broadcast
layer decide which method to use based on the ratio between cluster
size and the message's actual number of destination nodes.
In the latter case, a sending socket must stick to a previously
selected method until it enters an idle period of at least 5 seconds.
This eliminates the risk of message reordering caused by method change,
i.e., when changes to cluster size or number of destinations would
otherwise mandate a new method to be used.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide a simple helper with the same semantics of strncpy_from_unsafe():
int bpf_probe_read_str(void *dst, int size, const void *unsafe_addr)
This gives more flexibility to a bpf program. A typical use case is
intercepting a file name during sys_open(). The current approach is:
SEC("kprobe/sys_open")
void bpf_sys_open(struct pt_regs *ctx)
{
char buf[PATHLEN]; // PATHLEN is defined to 256
bpf_probe_read(buf, sizeof(buf), ctx->di);
/* consume buf */
}
This is suboptimal because the size of the string needs to be estimated
at compile time, causing more memory to be copied than often necessary,
and can become more problematic if further processing on buf is done,
for example by pushing it to userspace via bpf_perf_event_output(),
since the real length of the string is unknown and the entire buffer
must be copied (and defining an unrolled strnlen() inside the bpf
program is a very inefficient and unfeasible approach).
With the new helper, the code can easily operate on the actual string
length rather than the buffer size:
SEC("kprobe/sys_open")
void bpf_sys_open(struct pt_regs *ctx)
{
char buf[PATHLEN]; // PATHLEN is defined to 256
int res = bpf_probe_read_str(buf, sizeof(buf), ctx->di);
/* consume buf, for example push it to userspace via
* bpf_perf_event_output(), but this time we can use
* res (the string length) as event size, after checking
* its boundaries.
*/
}
Another useful use case is when parsing individual process arguments or
individual environment variables navigating current->mm->arg_start and
current->mm->env_start: using this helper and the return value, one can
quickly iterate at the right offset of the memory area.
The code changes simply leverage the already existent
strncpy_from_unsafe() kernel function, which is safe to be called from a
bpf program as it is used in bpf_trace_printk().
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan writes:
First round of new device support, features and cleanups for IIO in the 4.11 cycle.
It's shaping to be another fairly busy cycle. Lots more on the way!
New device support
* ads7950
- new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
* cm3605
- New driver for this light sensor and proximity sensor which is an
analog part with some additional digital controls.
* hx711
- New driver.
Core new stuff
* Gravity sensor type. This is a processed datastream in which the device
will try to work out which way is down.
* Split the buffer.h file into two parts. One provides the interface to 'use'
a buffer, the second provides the internals of the buffer functionality as
needed by implementations of buffers.
- Move documentation inline so as to allow use of private: tag when
generating documentation.
- Add some utility functions for the few things that are directly done
with the buffers.
- Stop exporting functions that no-one uses outside of the core code.
- Push docs down by the code in the c file where they should have always
been.
- Fix typo in kernel-doc for buffer.
- push down some includes that were previously happening implicitly.
- stop enabling the timestamp of the dummy device.
Features and cleanups
* ad5592r
- ACPI support
* ad5593r
-ACPI support.
* ad5933
- Fix a false comment about size of a particular register.
* ad7150
- replace S_IRUGO | S_IWUSR with 0644. I'm not that keen on these patches
in general, but as it was nicely presented I took this one anyway. As a
general rule will only take these as part of a larger driver cleanup.
- don't eat an error but rather reutnr it in the write_event_config callback.
* ad7606
- replace non standard range attibute with _scale
* ade7753
- use usleep_range for short sleeps
* ade7754
- use usleep_range for short sleeps
* ade7758
- use usleep_range for short sleeps
* ade7759
- use usleep_range for short sleeps
* ade7854
- use usleep_range for short sleeps
* adis16201
- fix description
* adis16203
- fix description
- fix copyright year
* adis16209
- fix description
* adt7316
- Add braces to arms of if else statement (for consistency)
- Alignment fixes.
* axp288
- Fix up an issue with accidental overwrites of data.
* bmi160
- add deivce tables for i2c and spi to support correctly identifying the
full dt name (including manufacturer).
- device tree binding.
* bmp280
- use usleep_range for short sleeps.
* cm3232
- return error from cm3232_reg_init rather than eating it if the last write
fails.
* dummy driver
- remove a semicolor found at end of a function defintition.
* exynos-adc
- use usleep_range for short sleeps.
* hid-sensor (accel)
- Add timestamp support. The hardware can provide timestamps so lets support
them. If not fall back to timestamps estimated in kernel.
* hid-sensor (light)
- Add a duplicate ID for the light channels so as to keep existing interface
whilst also using the more standard IIO interface.
* hts221
- acpi probing
* imx25-gcq
- Add a macro call to allow this driver to be automatically loaded.
* isl29028
- reorganise code to avoid deep nesting of if statements.
- move chip test and default regs into a function suitable or sharing with
power management code.
- tidy up some code alignment.
* lidar-lite-v3
- introduce compatible strings that make it clear Garmin have consideral
friends.
* mma8452
- avoid returning signed value when unsigned is appropriate
* spmi-vadc
- Update function for generic voltage conversion to take into account that
different channels on this device should be handled differently.
- Rework code to allow per channel voltage scaling and support the standard
options for this hardware.
- Fixup three minor issues with the above patches for this part. These all
effect test builds rather than the native builds for the part, but good to
clean them up anyway.
* st_sensors
- support device matching from the ACPI DST tables.
- acpi based probing for accelerometers
- acpi based probing for pressure sensors
- Allow pressure sensors to read negative values.
- Export sampling frequency for lps25h and lps331ap.
- Add support for the old DT bindings from the period when these deivces
were often supported through windows.
Docs fixup:
* typo in sysfs-bus-iio
This patch will allow for getparams to return the status of the HuC.
As the HuC has to be validated by the GuC this patch uses the validated
status to show when the HuC is loaded and ready for use. You cannot use
the loaded status as with the GuC as the HuC is verified after it is
loaded and is not usable until it is verified.
v2: removed the forewakes as the registers are already force-woken.
(T.Ursulin)
v3: rebased on top of drm-tip. Removed any reference to intel_huc.h
v4: rebased. Rename I915_PARAM_HAS_HUC to I915_PARAM_HUC_STATUS.
Remove intel_is_huc_valid() since it is used only in one place.
Put the case of I915_PARAM_HAS_HUC() in the right place.
v5: rebased. Add a comment to specify that I915_READ(reg)
does not read garbage value. The register HUC_STATUS2 is force
woken and no rpm is needed.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-6-git-send-email-anusha.srivatsa@intel.com
This patch is to implement sender-side procedures for the Outgoing
and Incoming SSN Reset Request Parameter described in rfc6525 section
5.1.2 and 5.1.3.
It is also add sockopt SCTP_RESET_STREAMS in rfc6525 section 6.3.2
for users.
Note that the new asoc member strreset_outstanding is to make sure
only one reconf request chunk on the fly as rfc6525 section 5.1.1
demands.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to add sockopt SCTP_ENABLE_STREAM_RESET to get/set
strreset_enable to indicate which reconf request type it supports,
which is described in rfc6525 section 6.3.1.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a method to reset the audit_lost value.
An AUDIT_SET message with the AUDIT_STATUS_LOST flag set by itself
will return a positive value repesenting the current audit_lost value
and reset the counter to zero. If AUDIT_STATUS_LOST is not the
only flag set, the reset command will be ignored. The value sent with
the command is ignored. The return value will be the +ve lost value at
reset time.
An AUDIT_CONFIG_CHANGE message will be queued to the listening audit
daemon. The message will be a standard CONFIG_CHANGE message with the
fields "lost=0" and "old=" with the latter containing the value of
audit_lost at reset time.
See: https://github.com/linux-audit/audit-kernel/issues/3
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Changed type of csum field in struct igmpv3_query from __be16 to
__sum16 to eliminate type warning, made same change in struct
igmpv3_report for consistency.
Fixed up an ntohs() where htons() should have been used instead.
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having MPLS packet stats is useful for observing network operation and
for diagnosing network problems. In the absence of anything better,
RFC2863 and RFC3813 are used for guidance for which stats to expose
and the semantics of them. In particular rx_noroutes maps to in
unknown protos in RFC2863. The stats are exposed to userspace via
AF_MPLS attributes embedded in the IFLA_STATS_AF_SPEC attribute of
RTM_GETSTATS messages.
All the introduced fields are 64-bit, even error ones, to ensure no
overflow with long uptimes. Per-CPU counters are used to avoid
cache-line contention on the commonly used fields. The other fields
have also been made per-CPU for code to avoid performance problems in
error conditions on the assumption that on some platforms the cost of
atomic operations could be more expensive than sending the packet
(which is what would be done in the success case). If that's not the
case, we could instead not use per-CPU counters for these fields.
Only unicast and non-fragment are exposed at the moment, but other
counters can be exposed in the future either by adding to the end of
struct mpls_link_stats or by additional netlink attributes in the
AF_MPLS IFLA_STATS_AF_SPEC nested attribute.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the functionality for including address-family-specific per-link
stats in RTM_GETSTATS messages. This is done through adding a new
IFLA_STATS_AF_SPEC attribute under which address family attributes are
nested and then the AF-specific attributes can be further nested. This
follows the model of IFLA_AF_SPEC on RTM_*LINK messages and it has the
advantage of presenting an easily extended hierarchy. The rtnl_af_ops
structure is extended to provide AFs with the opportunity to fill and
provide the size of their stats attributes.
One alternative would have been to provide AFs with the ability to add
attributes directly into the RTM_GETSTATS message without a nested
hierarchy. I discounted this approach as it increases the rate at
which the 32 attribute number space is used up and it makes
implementation a little more tricky for stats dump resuming (at the
moment the order in which attributes are added to the message has to
match the numeric order of the attributes).
Another alternative would have been to register per-AF RTM_GETSTATS
handlers. I discounted this approach as I perceived a common use-case
to be getting all the stats for an interface and this approach would
necessitate multiple requests/dumps to retrieve them all.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing IPv6-SR header files in include/uapi/linux/Kbuild.
Also, prevent seg6_lwt_headroom() from being exported and add
missing linux/types.h include.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 7bd509e311 ("bpf: add prog_digest and expose it via
fdinfo/netlink") was recently discussed, partially due to
admittedly suboptimal name of "prog_digest" in combination
with sha1 hash usage, thus inevitably and rightfully concerns
about its security in terms of collision resistance were
raised with regards to use-cases.
The intended use cases are for debugging resp. introspection
only for providing a stable "tag" over the instruction sequence
that both kernel and user space can calculate independently.
It's not usable at all for making a security relevant decision.
So collisions where two different instruction sequences generate
the same tag can happen, but ideally at a rather low rate. The
"tag" will be dumped in hex and is short enough to introspect
in tracepoints or kallsyms output along with other data such
as stack trace, etc. Thus, this patch performs a rename into
prog_tag and truncates the tag to a short output (64 bits) to
make it obvious it's not collision-free.
Should in future a hash or facility be needed with a security
relevant focus, then we can think about requirements, constraints,
etc that would fit to that situation. For now, rework the exposed
parts for the current use cases as long as nothing has been
released yet. Tested on x86_64 and s390x.
Fixes: 7bd509e311 ("bpf: add prog_digest and expose it via fdinfo/netlink")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
We have a number of fixes, in part because I was late
in actually sending them out - will try to do better in
the future:
* handle VHT opmode properly when hostapd is controlling
full station state
* two fixes for minimum channel width in mac80211
* don't leave SMPS set to junk in HT capabilities
* fix headroom when forwarding mesh packets, recently
broken by another fix that failed to take into account
frame encryption
* fix the TID in null-data packets indicating EOSP (end
of service period) in U-APSD
* prevent attempting to use (and then failing which
results in crashes) TXQs on stations that aren't added
to the driver yet
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
For 4.11, we seem to have more than in the past few releases:
* socket owner support for connections, so when the wifi
manager (e.g. wpa_supplicant) is killed, connections are
torn down - wpa_supplicant is critical to managing certain
operations, and can opt in to this where applicable
* minstrel & minstrel_ht updates to be more efficient (time and space)
* set wifi_acked/wifi_acked_valid for skb->destructor use in the
kernel, which was already available to userspace
* don't indicate new mesh peers that might be used if there's no
room to add them
* multicast-to-unicast support in mac80211, for better medium usage
(since unicast frames can use *much* higher rates, by ~3 orders of
magnitude)
* add API to read channel (frequency) limitations from DT
* add infrastructure to allow randomizing public action frames for
MAC address privacy (still requires driver support)
* many cleanups and small improvements/fixes across the board
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This enhances the connect timeout API to also carry the reason for the
timeout. These reason codes for the connect time out are represented by
enum nl80211_timeout_reason and are passed to user space through a new
attribute NL80211_ATTR_TIMEOUT_REASON (u32).
Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
[keep gfp_t argument last]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enhance sched scan to support option of finding a better BSS while in
connected state. Firmware scans the medium and reports when it finds a
known BSS which has better RSSI than the current connected BSS. New
attributes to specify the relative RSSI (compared to the current BSS)
are added to the sched scan to implement this.
Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to use a random local address (Address 2 = TA in transmit
and the same address in receive functionality) for Public Action frames
in order to improve privacy of WLAN clients. Applications fill the
random transmit address in the frame buffer in the NL80211_CMD_FRAME
command. This can be used only with the drivers that indicate support
for random local address by setting the new
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA and/or
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED in ext_features.
The driver needs to configure receive behavior to accept frames to the
specified random address during the time the frame exchange is pending
and such frames need to be acknowledged similarly to frames sent to the
local permanent address when this random address functionality is not
used.
Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx/66AK2x.
These SoCs have standard 8250 registers plus some extra non-standard
registers.
The UART will not function unless the non-standard Power and Emulation
Management Register (PWREMU_MGMT) is configured correctly. This is
currently handled in arch/arm/mach-davinci/serial.c for non-device-tree
boards. Making this part of the UART driver will allow UART to work on
device-tree boards as well and the mach code can eventually be removed.
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
