Changes in 5.15.47
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
staging: greybus: codecs: fix type confusion of list iterator variable
iio: adc: ad7124: Remove shift from scan_type
lkdtm/bugs: Check for the NULL pointer after calling kmalloc
lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAP
tty: goldfish: Use tty_port_destroy() to destroy port
tty: serial: owl: Fix missing clk_disable_unprepare() in owl_uart_probe
tty: n_tty: Restore EOF push handling behavior
serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe
tty: serial: fsl_lpuart: fix potential bug when using both of_alias_get_id and ida_simple_get
remoteproc: imx_rproc: Ignore create mem entry for resource table
usb: usbip: fix a refcount leak in stub_probe()
usb: usbip: add missing device lock on tweak configuration cmd
USB: storage: karma: fix rio_karma_init return
usb: musb: Fix missing of_node_put() in omap2430_probe
staging: fieldbus: Fix the error handling path in anybuss_host_common_probe()
pwm: lp3943: Fix duty calculation in case period was clamped
pwm: raspberrypi-poe: Fix endianness in firmware struct
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback
usb: dwc3: pci: Fix pm_runtime_get_sync() error checking
misc: fastrpc: fix an incorrect NULL check on list iterator
firmware: stratix10-svc: fix a missing check on list iterator
usb: typec: mux: Check dev_set_name() return value
rpmsg: virtio: Fix possible double free in rpmsg_probe()
rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()
rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl
iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value check
iio: proximity: vl53l0x: Fix return value check of wait_for_completion_timeout
iio: adc: sc27xx: fix read big scale voltage not right
iio: adc: sc27xx: Fine tune the scale calibration values
rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
pvpanic: Fix typos in the comments
misc/pvpanic: Convert regular spinlock into trylock on panic path
phy: qcom-qmp: fix pipe-clock imbalance on power-on failure
power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk
serial: sifive: Report actual baud base rather than fixed 115200
export: fix string handling of namespace in EXPORT_SYMBOL_NS
soundwire: intel: prevent pm_runtime resume prior to system suspend
coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
ksmbd: fix reference count leak in smb_check_perm_dacl()
extcon: ptn5150: Add queue work sync before driver release
soc: rockchip: Fix refcount leak in rockchip_grf_init
clocksource/drivers/riscv: Events are stopped during CPU suspend
ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1
rtc: mt6397: check return value after calling platform_get_resource()
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
staging: r8188eu: add check for kzalloc
tty: n_gsm: Don't ignore write return value in gsmld_output()
tty: n_gsm: Fix packet data hex dump output
serial: meson: acquire port->lock in startup()
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: digicolor-usart: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: sh-sci: Don't allow CS5-6
serial: sifive: Sanitize CSIZE and c_iflag
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: stm32-usart: Correct CSIZE, bits, and parity
firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle
bus: ti-sysc: Fix warnings for unbind for serial
driver: base: fix UAF when driver_attach failed
driver core: fix deadlock in __device_attach
watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks
net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register
modpost: fix removing numeric suffixes
jffs2: fix memory leak in jffs2_do_fill_super
ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not empty
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
selftests/bpf: fix selftest after random: Urandom_read tracepoint removal
selftests/bpf: fix stacktrace_build_id with missing kprobe/urandom_read
bpf: Fix probe read error in ___bpf_prog_run()
block: take destination bvec offsets into account in bio_copy_data_iter
riscv: read-only pages should not be writable
net/smc: fixes for converting from "struct smc_cdc_tx_pend **" to "struct smc_wr_tx_pend_priv *"
tcp: add accessors to read/set tp->snd_cwnd
nfp: only report pause frame configuration for physical device
sfc: fix considering that all channels have TX queues
sfc: fix wrong tx channel offset with efx_separate_tx_channels
block: make bioset_exit() fully resilient against being called twice
vdpa: Fix error logic in vdpa_nl_cmd_dev_get_doit
virtio: pci: Fix an error handling path in vp_modern_probe()
net/mlx5: Don't use already freed action pointer
net/mlx5e: TC NIC mode, fix tc chains miss table
net/mlx5: CT: Fix header-rewrite re-use for tupels
net/mlx5: correct ECE offset in query qp output
net/mlx5e: Update netdev features after changing XDP state
net: sched: add barrier to fix packet stuck problem for lockless qdisc
tcp: tcp_rtx_synack() can be called from process context
vdpa: ifcvf: set pci driver data in probe
octeontx2-af: fix error code in is_valid_offset()
s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag
regulator: mt6315-regulator: fix invalid allowed mode
gpio: pca953x: use the correct register address to do regcache sync
afs: Fix infinite loop found by xfstest generic/676
scsi: sd: Fix potential NULL pointer dereference
tipc: check attribute length for bearer name
driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
dmaengine: idxd: set DMA_INTERRUPT cap bit
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
bootconfig: Make the bootconfig.o as a normal object file
tracing: Make tp_printk work on syscall tracepoints
tracing: Fix sleeping function called from invalid context on RT kernel
tracing: Avoid adding tracer option before update_tracer_options
iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe()
iommu/arm-smmu-v3: check return value after calling platform_get_resource()
f2fs: remove WARN_ON in f2fs_is_valid_blkaddr
i2c: cadence: Increase timeout per message if necessary
m68knommu: set ZERO_PAGE() to the allocated zeroed page
m68knommu: fix undefined reference to `_init_sp'
dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type
NFSv4: Don't hold the layoutget locks across multiple RPC calls
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
RISC-V: use memcpy for kexec_file mode
m68knommu: fix undefined reference to `mach_get_rtc_pll'
f2fs: fix to tag gcing flag on page during file defragment
xprtrdma: treat all calls not a bcall when bc_serv is NULL
drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()
drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid
netfilter: nat: really support inet nat without l3 address
netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path
netfilter: nf_tables: delete flowtable hooks via transaction list
powerpc/kasan: Force thread size increase with KASAN
SUNRPC: Trap RDMA segment overflows
netfilter: nf_tables: always initialize flowtable hook list in transaction
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
netfilter: nf_tables: release new hooks on unsupported flowtable flags
netfilter: nf_tables: memleak flow rule from commit path
netfilter: nf_tables: bail out early if hardware offload is not supported
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
stmmac: intel: Fix an error handling path in intel_eth_pci_probe()
af_unix: Fix a data-race in unix_dgram_peer_wake_me().
bpf, arm64: Clear prog->jited_len along prog->jited
net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list
net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure
i40e: xsk: Move tmp desc array from driver to pool
xsk: Fix handling of invalid descriptors in XSK TX batching API
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
net: mdio: unexport __init-annotated mdio_bus_init()
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
net: ipv6: unexport __init-annotated seg6_hmac_init()
net/mlx5: Lag, filter non compatible devices
net/mlx5: Fix mlx5_get_next_dev() peer device matching
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: fs, fail conflicting actions
ip_gre: test csum_start instead of transport header
net: altera: Fix refcount leak in altera_tse_mdio_create
net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
tcp: use alloc_large_system_hash() to allocate table_perturb
drm: imx: fix compiler warning with gcc-12
nfp: flower: restructure flow-key for gre+vlan combination
iov_iter: Fix iter_xarray_get_pages{,_alloc}()
iio: dummy: iio_simple_dummy: check the return value of kstrdup()
staging: rtl8712: fix a potential memory leak in r871xu_drv_init()
iio: st_sensors: Add a local lock for protecting odr
lkdtm/usercopy: Expand size of "out of frame" object
drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback()
drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
tty: Fix a possible resource leak in icom_probe
thunderbolt: Use different lane for second DisplayPort tunnel
drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
USB: host: isp116x: check return value after calling platform_get_resource()
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
USB: hcd-pci: Fully suspend across freeze/thaw cycle
char: xillybus: fix a refcount leak in cleanup_dev()
sysrq: do not omit current cpu when showing backtrace of all active CPUs
usb: dwc2: gadget: don't reset gadget's driver->bus
soundwire: qcom: adjust autoenumeration timeout
misc: rtsx: set NULL intfdata when probe fails
extcon: Fix extcon_get_extcon_dev() error handling
extcon: Modify extcon device to be created after driver data is set
clocksource/drivers/sp804: Avoid error on multiple instances
staging: rtl8712: fix uninit-value in usb_read8() and friends
staging: rtl8712: fix uninit-value in r871xu_drv_init()
serial: msm_serial: disable interrupts in __msm_console_write()
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
watchdog: wdat_wdt: Stop watchdog when rebooting the system
md: protect md_unregister_thread from reentrancy
scsi: myrb: Fix up null pointer access on myrb_cleanup()
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
ceph: allow ceph.dir.rctime xattr to be updatable
ceph: flush the mdlog for filesystem sync
drm/amd/display: Check if modulo is 0 before dividing.
drm/radeon: fix a possible null pointer dereference
drm/amd/pm: Fix missing thermal throttler status
um: line: Use separate IRQs per line
modpost: fix undefined behavior of is_arm_mapping_symbol()
x86/cpu: Elide KCSAN for cpu_has() and friends
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
nbd: call genl_unregister_family() first in nbd_cleanup()
nbd: fix race between nbd_alloc_config() and module removal
nbd: fix io hung while disconnecting device
s390/gmap: voluntarily schedule during key setting
cifs: version operations for smb20 unneeded when legacy support disabled
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
nodemask: Fix return values to be unsigned
vringh: Fix loop descriptors check in the indirect cases
scripts/gdb: change kernel config dumping method
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ALSA: hda/realtek: Add quirk for HP Dev One
cifs: return errors during session setup during reconnects
cifs: fix reconnect on smb3 mount types
KEYS: trusted: tpm2: Fix migratable logic
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
mmc: block: Fix CQE recovery reset success
net: phy: dp83867: retrigger SGMII AN when link change
net: openvswitch: fix misuse of the cached connection on tuple changes
writeback: Fix inode->i_io_list not be protected by inode->i_lock error
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
ixgbe: fix bcast packets Rx on VF after promisc removal
ixgbe: fix unexpected VLAN Rx in promisc mode on VF
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
vduse: Fix NULL pointer dereference on sysfs access
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/amdgpu: update VCN codec support for Yellow Carp
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
powerpc/mm: Switch obsolete dssall to .long
drm/ast: Create threshold values for AST2600
random: avoid checking crng_ready() twice in random_init()
random: mark bootloader randomness code as __init
random: account for arch randomness in bits
md/raid0: Ignore RAID0 layout if the second zone has only one device
net/sched: act_police: more accurate MTU policing
PCI: qcom: Fix pipe clock imbalance
zonefs: fix handling of explicit_open option on mount
iov_iter: fix build issue due to possible type mis-match
dmaengine: idxd: add missing callback function to support DMA_INTERRUPT
tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
xsk: Fix possible crash when multiple sockets are created
Linux 5.15.47
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I40e7672edf2bd713fee775919d062e2934d9103d
[ Upstream commit 5dcc2afe716d69f5112ce035cb14f007461ff189 ]
Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.
- Oops's backtrace.
Backtrace:
[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show)
[<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show)
[<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show)
[<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read)
[<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read)
[<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read)
[<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read)
[<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read)
[<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read)
[<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return)
Signed-off-by: bumwoo lee <bw365.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58e4a2d27d3255e4e8c507fdc13734dccc9fc4c7 ]
The extcon_get_extcon_dev() function returns error pointers on error,
NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV)
when the CONFIG_EXTCON option is disabled. This is very complicated for
the callers to handle and a number of them had bugs that would lead to
an Oops.
In real life, there are two things which prevented crashes. First,
error pointers would only be returned if there was bug in the caller
where they passed a NULL "extcon_name" and none of them do that.
Second, only two out of the eight drivers will build when CONFIG_EXTCON
is disabled.
The normal way to write this would be to return -EPROBE_DEFER directly
when appropriate and return NULL when CONFIG_EXTCON is disabled. Then
the error handling is simple and just looks like:
dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev));
if (IS_ERR(dev->edev))
return PTR_ERR(dev->edev);
For the two drivers which can build with CONFIG_EXTCON disabled, then
extcon_get_extcon_dev() will now return NULL which is not treated as an
error and the probe will continue successfully. Those two drivers are
"typec_fusb302" and "max8997-battery". In the original code, the
typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but
now that function is a no-op. For the max8997-battery driver everything
should continue working as is.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The implementation of extcon_get_state() defines `id` as const unsigned
int, while the declarations do not qualify. This leads to inconsistent
type information recorded when comparing Dwarf produced by Clang full
LTO and Clang thin LTO.
This is still valid code, but for now address this by aligning the
declarations with the definitions until it can be addressed in the
compiler.
Bug: 221022839
Bug: 220181989
Signed-off-by: Matthias Maennich <maennich@google.com>
Change-Id: Iad555f551e998bec62a27cce63b3c033a46baf7f
When devm_kcalloc() fails, we should execute device_unregister()
to unregister edev->dev from system.
Fixes: 046050f6e6 ("extcon: Update the prototype of extcon_register_notifier() with enum extcon")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The variable idx is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
extcon_get_edev_name() function provides client driver to request
extcon dev's name. If extcon driver and client driver are compiled
as loadable modules, extcon_get_edev_name() function symbol is not
visible to client driver. Hence mark extcon_find_edev_name() function
as exported symbol.
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When assign unions we need to supply non-scalar value, otherwise
static analyzer is not happy:
CHECK drivers/extcon/extcon.c
drivers/extcon/extcon.c:631:22: warning: cast to non-scalar
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Previously, extcon used the spinlock before calling the notifier_call_chain
to prevent the scheduled out of task and to prevent the notification delay.
When spinlock is locked for sending the notification, deadlock issue
occured on the side of extcon consumer device. To fix this issue,
extcon consumer device should always use the work. it is always not
reasonable to use work.
To fix this issue on extcon consumer device, release locking when sending
the notification of connector state.
Fixes: ab11af049f ("extcon: Add the synchronization extcon APIs to support the notification")
Cc: stable@vger.kernel.org
Cc: Roger Quadros <rogerq@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Since extcon property is not allowed in DT, extcon subsystem requires
another way to get extcon device. Lets try the simplest approach - get
edev by of_node.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The array extcon_info is read only, local to the source and does not
need to be in global scope, so make it static const.
Cleans up sparse warning:
symbol 'extcon_info' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The extcon files explains the detailed operation for functions and
what is meaning of extcon structure. There are different explanation
even if the same argument.
So, it modifies the description for both functions and structures
in order to improve the readability and guide the role of functions
more well.
Also, this patch fixes the mismatching license info as a GPL v2
and removes the inactive author information.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the porting compatibility for switch class
because there is no any usage and requirement of swich class
over a couple of years.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The extcon core already provides the extcon_register_notifier() function
in order to register the notifier block which is used to monitor
the state change for the specific external connector such as EXTCON_USB,
EXTCON_USB_HOST and so on. The extcon consumer uses the this function.
The extcon consumer might need to monitor the all supported external
connectors from the extcon device. In this case, The extcon consumer
should have each notifier_block structure for each external connector.
This patch adds the new extcon_register_notifier_all() function
that extcon consumer is able to monitor the state change of all
supported external connectors by using only one notifier_block structure.
- List of new added functions:
int extcon_register_notifier_all(struct extcon_dev *edev,
struct notifier_block *nb);
int extcon_unregister_notifier_all(struct extcon_dev *edev,
struct notifier_block *nb);
int devm_extcon_register_notifier_all(struct device *dev,
struct extcon_dev *edev, struct notifier_block *nb);
void devm_extcon_unregister_notifier_all(struct device *dev,
struct extcon_dev *edev, struct notifier_block *nb);
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
This patch renames the EXTCON_USB_HOST by using '-' char because
the name of all external connector use the '-' char instead of '_' char.
- "USB_HOST" -> "USB-HOST"
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds the new EXTCON_CHG_USB_PD for USB PD (Power Delivery)[1].
The USB Power Delivery specification specifies that USB cable provides
the increased power more than 7.5W to device with larger power demand.
The EXTCON_CHG_USB_PD has the EXTCON_TYPE_CHG and EXTCON_TYPE_USB type.
[1] https://en.wikipedia.org/wiki/USB#PD
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch moves the 'struct extcon_dev' of extcon subsystem
to driver/extcon/extcon.h header file because the struct extcon_dev have to
be handled by extcon API to guarantee the consistency of strcut extcon_dev.
If external drivers are able to touch the struct extcon_dev directly, it might
cause the critical and unknown problem.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the potential problem of extcon_register_notifier()
when edev parameter is NULL. When edev is NULL, this function returns
the first extcon device which includes the sepecific external connector
of second paramter. But, it don't guarantee the same operation in all cases.
To remove this confusion and potential problem, this patch fixes it.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Function get_zeroed_page() returns a NULL pointer if there is no enough
memory. In function extcon_sync(), it returns 0 if the call to
get_zeroed_page() fails. The return value 0 indicates success in the
context, which is incosistent with the execution status. This patch
fixes the bug by returning -ENOMEM.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.
[1] https://en.wikipedia.org/wiki/Wireless_power_transfer
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.
[1] https://en.wikipedia.org/wiki/Head-mounted_display
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.
The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().
The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
synchronize the information between extcon provider driver
and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.
For example,
case 1, change the state of external connector and synchronized the data.
extcon_set_state_sync(edev, EXTCON_USB, 1);
case 2, change both the state and property of external connector
and synchronized the data.
extcon_set_state(edev, EXTCON_USB, 1);
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
extcon_sync(edev, EXTCON_USB);
case 3, change the property of external connector and synchronized the data.
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
extcon_sync(edev, EXTCON_USB);
case 4, change the property of external connector and synchronized the data.
extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()
But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.
Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.
- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]
Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value prop_val)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB : USB connector
- EXTCON_TYPE_CHG : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector
Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch fixes below compilation warning:-
drivers/extcon/extcon.c: In function extcon_register_notifier:
drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized]
if (idx >= 0) {
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[cw00.choi : Modify the patch title using the a captical letter for first char]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.
Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the state_store() which change the state of external
connectors with bit masking on user-space. It is wrong access to modify
the change the state of external connectors.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Sometimes drivers may call this API and expect it to fail because
the extcon they're looking for is optional. Let's move these
prints to debug level so it doesn't look like there's a problem
when there isn't one.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch moves the struct extcon_cable because that should
be only handled by extcon core. There are no reason to publish
the internal structure.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
If we call extcon_register_notifier() with the wrong cable type,
it blows up with an oops instead of returning an error code.
Let's be nice and fail gracefully given that the consumer might
not know if the cable is supported by the extcon provider.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the deprecated extcon functions using string type
to identify the type of external connector. The Commit 2a9de9c0f0
("extcon: Use the unique id for external connector instead of string)
uses the unique id to separate the type of external connector instead of
string name.
- extcon_register_interest()
- extcon_unregister_interest()
- extcon_set_cable_state()
- extcon_get_cable_state()
And, extcon_register_interest() finds the first extcon device to include the
requested external connector from extcon client device and then register the
notifier if extcon device argument is NULL. Instead, extcon_register_notifier()
supports this feature.
But, this patch remains the deprecatd function definition to prevent
the build break.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch modifies the id and name of external connector with the
additional prefix to clarify both attribute and meaning of external
connector as following:
- EXTCON_CHG_* mean the charger connector.
- EXTCON_JACK_* mean the jack connector.
- EXTCON_DISP_* mean the display port connector.
Following table show the new name of external connector with old name:
--------------------------------------------------
Old extcon name | New extcon name |
--------------------------------------------------
EXTCON_TA | EXTCON_CHG_USB_DCP |
EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP |
EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST |
EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW |
--------------------------------------------------
EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE |
EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE |
EXTCON_LINE_IN | EXTCON_JACK_LINE_IN |
EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT |
EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN |
EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT |
EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN |
EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT |
--------------------------------------------------
EXTCON_HMDI | EXTCON_DISP_HDMI |
EXTCON_MHL | EXTCON_DISP_MHL |
EXTCON_DVI | EXTCON_DISP_DVI |
EXTCON_VGA | EXTCON_DISP_VGA |
--------------------------------------------------
And, when altering the name of USB charger connector, EXTCON refers to the
"Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard
name of USB charging port as following. Following name of USB charging port
are already used in power_supply subsystem. We chan check it on patch[2].
- EXTCON_CHG_USB_SDP /* Standard Downstream Port */
- EXTCON_CHG_USB_DCP /* Dedicated Charging Port */
- EXTCON_CHG_USB_CDP /* Charging Downstream Port */
- EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */
[1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip
[2] commit 85efc8a18c ("power_supply: Add types for USB chargers")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ckeepax: For the Arizona changes]
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
is_extcon_changed should only check the idx-th bit of new, not
the entirety of new when setting attached.
This fixes extcon sending notifications that a cable was inserted when
it gets removed while another cable is still connected.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Unsigned is never less than zero so this error handling won't work.
Fixes: be052cc877 ('extcon: Fix hang and extcon_get/set_cable_state().')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
[cw00.choi: Change the patch title and fix signedness bug of find_cable_index_by_id() ]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the optional print_state() function pointer which included
in 'struct extcon_dev' because the extcon must maintain the consistent name
of extcon device on sysfs instead of inconsistent state of external connectors.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Currently the extcon code notifiers the interested listeners
before it updates the extcon state with the new state.
This will cause the listeners that use extcon_cable_get_state()
to get the stale state and loose the new state.
Fix this by first changing the extcon state variable and then
notifying listeners.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
