7c6bd60999f32138e3b73fd97ea11ef47a94de25
17036 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kuan-Ying Lee
|
7d3bd683e0 |
mm/kmemleak: reset tag when compare object pointer
commit bfc8089f00fa526dea983844c880fa8106c33ac4 upstream. When we use HW-tag based kasan and enable vmalloc support, we hit the following bug. It is due to comparison between tagged object and non-tagged pointer. We need to reset the kasan tag when we need to compare tagged object and non-tagged pointer. kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440 CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1 Hardware name: MT6983(ENG) (DT) Call trace: add_scan_area+0xc4/0x244 kmemleak_scan_area+0x40/0x9c layout_and_allocate+0x1e8/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768): kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197 kmemleak: [name:kmemleak&] min_count = 0 kmemleak: [name:kmemleak&] count = 0 kmemleak: [name:kmemleak&] flags = 0x1 kmemleak: [name:kmemleak&] checksum = 0 kmemleak: [name:kmemleak&] backtrace: module_alloc+0x9c/0x120 move_module+0x34/0x19c layout_and_allocate+0x1c4/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Nicholas Tang <nicholas.tang@mediatek.com> Cc: Yee Lee <yee.lee@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Rik van Riel
|
7d04d6d5c1 |
mm,hwpoison: unmap poisoned page before invalidation
commit 3149c79f3cb0e2e3bafb7cfadacec090cbd250d3 upstream. In some cases it appears the invalidation of a hwpoisoned page fails because the page is still mapped in another process. This can cause a program to be continuously restarted and die when it page faults on the page that was not invalidated. Avoid that problem by unmapping the hwpoisoned page when we find it. Another issue is that sometimes we end up oopsing in finish_fault, if the code tries to do something with the now-NULL vmf->page. I did not hit this error when submitting the previous patch because there are several opportunities for alloc_set_pte to bail out before accessing vmf->page, and that apparently happened on those systems, and most of the time on other systems, too. However, across several million systems that error does occur a handful of times a day. It can be avoided by returning VM_FAULT_NOPAGE which will cause do_read_fault to return before calling finish_fault. Link: https://lkml.kernel.org/r/20220325161428.5068d97e@imladris.surriel.com Fixes: e53ac7374e64 ("mm: invalidate hwpoison page cache page in fault path") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Charan Teja Kalla
|
d4835551fd |
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"
commit e6b0a7b357659c332231621e4315658d062c23ee upstream.
This reverts commit 08095d6310a7 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.
As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed. Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.
Thus revert this patch and return proper bytes advised.
Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com
Fixes: 08095d6310a7ce ("mm: madvise: skip unmapped vma holes passed to process_madvise")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Charan Teja Kalla
|
a07a4b75cc |
mm: madvise: return correct bytes advised with process_madvise
commit 5bd009c7c9a9e888077c07535dc0c70aeab242c3 upstream. Patch series "mm: madvise: return correct bytes processed with process_madvise", v2. With the process_madvise(), always choose to return non zero processed bytes over an error. This can help the user to know on which VMA, passed in the 'struct iovec' vector list, is failed to advise thus can take the decission of retrying/skipping on that VMA. This patch (of 2): The process_madvise() system call returns error even after processing some VMA's passed in the 'struct iovec' vector list which leaves the user confused to know where to restart the advise next. It is also against this syscall man page[1] documentation where it mentions that "return value may be less than the total number of requested bytes, if an error occurred after some iovec elements were already processed.". Consider a user passed 10 VMA's in the 'struct iovec' vector list of which 9 are processed but one. Then it just returns the error caused on that failed VMA despite the first 9 VMA's processed, leaving the user confused about on which VMA it is failed. Returning the number of bytes processed here can help the user to know which VMA it is failed on and thus can retry/skip the advise on that VMA. [1]https://man7.org/linux/man-pages/man2/process_madvise.2.html. Link: https://lkml.kernel.org/r/cover.1647008754.git.quic_charante@quicinc.com Link: https://lkml.kernel.org/r/125b61a0edcee5c2db8658aed9d06a43a19ccafc.1647008754.git.quic_charante@quicinc.com Fixes: ecb8ac8b1f14("mm/madvise: introduce process_madvise() syscall: an external memory hinting API") Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Charan Teja Kalla
|
27d96f11b0 |
mm: madvise: skip unmapped vma holes passed to process_madvise
commit 08095d6310a7ce43256b4251577bc66a25c6e1a6 upstream. The process_madvise() system call is expected to skip holes in vma passed through 'struct iovec' vector list. But do_madvise, which process_madvise() calls for each vma, returns ENOMEM in case of unmapped holes, despite the VMA is processed. Thus process_madvise() should treat ENOMEM as expected and consider the VMA passed to as processed and continue processing other vma's in the vector list. Returning -ENOMEM to user, despite the VMA is processed, will be unable to figure out where to start the next madvise. Link: https://lkml.kernel.org/r/4f091776142f2ebf7b94018146de72318474e686.1647008754.git.quic_charante@quicinc.com Fixes: ecb8ac8b1f14("mm/madvise: introduce process_madvise() syscall: an external memory hinting API") Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Hugh Dickins
|
5e217aa2c8 |
mempolicy: mbind_range() set_policy() after vma_merge()
commit 4e0906008cdb56381638aa17d9c32734eae6d37a upstream. v2.6.34 commit |
||
|
Rik van Riel
|
3bae72c2db |
mm: invalidate hwpoison page cache page in fault path
commit e53ac7374e64dede04d745ff0e70ff5048378d1f upstream. Sometimes the page offlining code can leave behind a hwpoisoned clean page cache page. This can lead to programs being killed over and over and over again as they fault in the hwpoisoned page, get killed, and then get re-spawned by whatever wanted to run them. This is particularly embarrassing when the page was offlined due to having too many corrected memory errors. Now we are killing tasks due to them trying to access memory that probably isn't even corrupted. This problem can be avoided by invalidating the page from the page fault handler, which already has a branch for dealing with these kinds of pages. With this patch we simply pretend the page fault was successful if the page was invalidated, return to userspace, incur another page fault, read in the file from disk (to a new memory page), and then everything works again. Link: https://lkml.kernel.org/r/20220212213740.423efcea@imladris.surriel.com Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Alistair Popple
|
a74bb0eeab |
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
commit ddbc84f3f595cf1fc8234a191193b5d20ad43938 upstream.
ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn
is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is
not enough room for ZONE_MOVABLE on that node.
Unfortunately this condition is not checked for. This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.
calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents
the maximum number of pages in a zone assuming no holes.
Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages. In this case it will skip setting up the
zone, including the initialisation of free_lists[].
However populated_zone() checks zone->present_pages to see if a zone has
memory available. This is used by iterators such as
walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the
free_list of each zone in each node, which are assumed to be initialised
due to the zone not being empty.
As free_area_init_core() never initialised the free_lists[] this results
in the following kernel crash when trying to read /proc/pagetypeinfo:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:pagetypeinfo_show+0x163/0x460
Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82
RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b
RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e
R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00
R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000
FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0
Call Trace:
seq_read_iter+0x128/0x460
proc_reg_read_iter+0x51/0x80
new_sync_read+0x113/0x1a0
vfs_read+0x136/0x1d0
ksys_read+0x70/0xf0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.
Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com
Fixes:
|
||
Miaohe Lin
|
025a7ccfb7 |
mm/mlock: fix two bugs in user_shm_lock()
commit e97824ff663ce3509fe040431c713182c2f058b1 upstream.
user_shm_lock forgets to set allowed to 0 when get_ucounts fails. So the
later user_shm_unlock might do the extra dec_rlimit_ucounts. Also in the
RLIM_INFINITY case, user_shm_lock will success regardless of the value of
memlock where memblock == LONG_MAX && !capable(CAP_IPC_LOCK) should fail.
Fix all of these by changing the code to leave lock_limit at ULONG_MAX aka
RLIM_INFINITY, leave "allowed" initialized to 0 and remove the special case
of RLIM_INFINITY as nothing can be greater than ULONG_MAX.
Credit goes to Eric W. Biederman for proposing simplifying the code and
thus catching the later bug.
Fixes:
|
||
Muchun Song
|
dd84d71bcb |
mm: kfence: fix missing objcg housekeeping for SLAB
commit ae085d7f9365de7da27ab5c0d16b12d51ea7fca9 upstream.
The objcg is not cleared and put for kfence object when it is freed,
which could lead to memory leak for struct obj_cgroup and wrong
statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.
Since the last freed object's objcg is not cleared,
mem_cgroup_from_obj() could return the wrong memcg when this kfence
object, which is not charged to any objcgs, is reallocated to other
users.
A real word issue [1] is caused by this bug.
Link: https://lore.kernel.org/all/000000000000cabcb505dae9e577@google.com/ [1]
Reported-by: syzbot+f8c45ccc7d5d45fc5965@syzkaller.appspotmail.com
Fixes:
|
||
Guo Ziliang
|
6829aa17ca |
mm: swap: get rid of livelock in swapin readahead
commit 029c4628b2eb2ca969e9bf979b05dc18d8d5575e upstream. In our testing, a livelock task was found. Through sysrq printing, same stack was found every time, as follows: __swap_duplicate+0x58/0x1a0 swapcache_prepare+0x24/0x30 __read_swap_cache_async+0xac/0x220 read_swap_cache_async+0x58/0xa0 swapin_readahead+0x24c/0x628 do_swap_page+0x374/0x8a0 __handle_mm_fault+0x598/0xd60 handle_mm_fault+0x114/0x200 do_page_fault+0x148/0x4d0 do_translation_fault+0xb0/0xd4 do_mem_abort+0x50/0xb0 The reason for the livelock is that swapcache_prepare() always returns EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it cannot jump out of the loop. We suspect that the task that clears the SWAP_HAS_CACHE flag never gets a chance to run. We try to lower the priority of the task stuck in a livelock so that the task that clears the SWAP_HAS_CACHE flag will run. The results show that the system returns to normal after the priority is lowered. In our testing, multiple real-time tasks are bound to the same core, and the task in the livelock is the highest priority task of the core, so the livelocked task cannot be preempted. Although cond_resched() is used by __read_swap_cache_async, it is an empty function in the preemptive system and cannot achieve the purpose of releasing the CPU. A high-priority task cannot release the CPU unless preempted by a higher-priority task. But when this task is already the highest priority task on this core, other tasks will not be able to be scheduled. So we think we should replace cond_resched() with schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will call set_current_state first to set the task state, so the task will be removed from the running queue, so as to achieve the purpose of giving up the CPU and prevent it from running in kernel mode for too long. (akpm: ugly hack becomes uglier. But it fixes the issue in a backportable-to-stable fashion while we hopefully work on something better) Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Acked-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roger Quadros <rogerq@kernel.org> Cc: Ziliang Guo <guo.ziliang@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Hugh Dickins
|
b7c35587be |
memfd: fix F_SEAL_WRITE after shmem huge page allocated
commit f2b277c4d1c63a85127e8aa2588e9cc3bd21cb99 upstream. Wangyong reports: after enabling tmpfs filesystem to support transparent hugepage with the following command: echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled the docker program tries to add F_SEAL_WRITE through the following command, but it fails unexpectedly with errno EBUSY: fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1. That is because memfd_tag_pins() and memfd_wait_for_pins() were never updated for shmem huge pages: checking page_mapcount() against page_count() is hopeless on THP subpages - they need to check total_mapcount() against page_count() on THP heads only. Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins() (compared != 1): either can be justified, but given the non-atomic total_mapcount() calculation, it is better now to be strict. Bear in mind that total_mapcount() itself scans all of the THP subpages, when choosing to take an XA_CHECK_SCHED latency break. Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a page has been swapped out since memfd_tag_pins(), then its refcount must have fallen, and so it can safely be untagged. Link: https://lkml.kernel.org/r/a4f79248-df75-2c8c-3df-ba3317ccb5da@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Zeal Robot <zealci@zte.com.cn> Reported-by: wangyong <wang.yong12@zte.com.cn> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: CGEL ZTE <cgel.zte@gmail.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Song Liu <songliubraving@fb.com> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Daniel Borkmann
|
261eff11ad |
mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls
commit 0708a0afe291bdfe1386d74d5ec1f0c27e8b9168 upstream. syzkaller was recently triggering an oversized kvmalloc() warning via xdp_umem_create(). The triggered warning was added back in |
||
Andrey Konovalov
|
1123c2fb9d |
kasan: fix quarantine conflicting with init_on_free
[ Upstream commit 26dca996ea7b1ac7008b6b6063fc88b849e3ac3e ]
KASAN's quarantine might save its metadata inside freed objects. As
this happens after the memory is zeroed by the slab allocator when
init_on_free is enabled, the memory coming out of quarantine is not
properly zeroed.
This causes lib/test_meminit.c tests to fail with Generic KASAN.
Zero the metadata when the object is removed from quarantine.
Link: https://lkml.kernel.org/r/2805da5df4b57138fdacd671f5d227d58950ba54.1640037083.git.andreyknvl@google.com
Fixes:
|
||
Kefeng Wang
|
f1675103e0 |
mm: defer kmemleak object creation of module_alloc()
[ Upstream commit 60115fa54ad7b913b7cb5844e6b7ffeb842d55f2 ]
Yongqiang reports a kmemleak panic when module insmod/rmmod with KASAN
enabled(without KASAN_VMALLOC) on x86[1].
When the module area allocates memory, it's kmemleak_object is created
successfully, but the KASAN shadow memory of module allocation is not
ready, so when kmemleak scan the module's pointer, it will panic due to
no shadow memory with KASAN check.
module_alloc
__vmalloc_node_range
kmemleak_vmalloc
kmemleak_scan
update_checksum
kasan_module_alloc
kmemleak_ignore
Note, there is no problem if KASAN_VMALLOC enabled, the modules area
entire shadow memory is preallocated. Thus, the bug only exits on ARCH
which supports dynamic allocation of module area per module load, for
now, only x86/arm64/s390 are involved.
Add a VM_DEFER_KMEMLEAK flags, defer vmalloc'ed object register of
kmemleak in module_alloc() to fix this issue.
[1] https://lore.kernel.org/all/6d41e2b9-4692-5ec4-b1cd-cbe29ae89739@huawei.com/
[wangkefeng.wang@huawei.com: fix build]
Link: https://lkml.kernel.org/r/20211125080307.27225-1-wangkefeng.wang@huawei.com
[akpm@linux-foundation.org: simplify ifdefs, per Andrey]
Link: https://lkml.kernel.org/r/CA+fCnZcnwJHUQq34VuRxpdoY6_XbJCDJ-jopksS5Eia4PijPzw@mail.gmail.com
Link: https://lkml.kernel.org/r/20211124142034.192078-1-wangkefeng.wang@huawei.com
Fixes:
|
||
|
Miaohe Lin
|
fd21a0b6da |
memblock: use kfree() to release kmalloced memblock regions
commit c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream.
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes:
|
||
Matthew Wilcox (Oracle)
|
f89903ae99 |
mm/filemap: Fix handling of THPs in generic_file_buffered_read()
When a THP is present in the page cache, we can return it several times,
leading to userspace seeing the same data repeatedly if doing a read()
that crosses a 64-page boundary. This is probably not a security issue
(since the data all comes from the same file), but it can be interpreted
as a transient data corruption issue. Fortunately, it is very rare as
it can only occur when CONFIG_READ_ONLY_THP_FOR_FS is enabled, and it can
only happen to executables. We don't often call read() on executables.
This bug is fixed differently in v5.17 by commit 6b24ca4a1a8d
("mm: Use multi-index entries in the page cache"). That commit is
unsuitable for backporting, so fix this in the clearest way. It
sacrifices a little performance for clarity, but this should never
be a performance path in these kernel versions.
Fixes:
|
||
Linus Torvalds
|
b3dc4b9d3c |
mm: don't try to NUMA-migrate COW pages that have other uses
commit 80d47f5de5e311cbc0d01ebb6ee684e8f4c196c6 upstream. Oded Gabbay reports that enabling NUMA balancing causes corruption with his Gaudi accelerator test load: "All the details are in the bug, but the bottom line is that somehow, this patch causes corruption when the numa balancing feature is enabled AND we don't use process affinity AND we use GUP to pin pages so our accelerator can DMA to/from system memory. Either disabling numa balancing, using process affinity to bind to specific numa-node or reverting this patch causes the bug to disappear" and Oded bisected the issue to commit |
||
Roman Gushchin
|
956cf21cd1 |
mm: memcg: synchronize objcg lists with a dedicated spinlock
commit 0764db9b49c932b89ee4d9e3236dff4bb07b4a66 upstream.
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes:
|
||
Lang Yu
|
a5389c8099 |
mm/kmemleak: avoid scanning potential huge holes
commit c10a0f877fe007021d70f9cada240f42adc2b5db upstream.
When using devm_request_free_mem_region() and devm_memremap_pages() to
add ZONE_DEVICE memory, if requested free mem region's end pfn were
huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see
move_pfn_range_to_zone()). Thus it creates a huge hole between
node_start_pfn() and node_end_pfn().
We found on some AMD APUs, amdkfd requested such a free mem region and
created a huge hole. In such a case, following code snippet was just
doing busy test_bit() looping on the huge hole.
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
struct page *page = pfn_to_online_page(pfn);
if (!page)
continue;
...
}
So we got a soft lockup:
watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
RIP: 0010:pfn_to_online_page+0x5/0xd0
Call Trace:
? kmemleak_scan+0x16a/0x440
kmemleak_write+0x306/0x3a0
? common_file_perm+0x72/0x170
full_proxy_write+0x5c/0x90
vfs_write+0xb9/0x260
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
I did some tests with the patch.
(1) amdgpu module unloaded
before the patch:
real 0m0.976s
user 0m0.000s
sys 0m0.968s
after the patch:
real 0m0.981s
user 0m0.000s
sys 0m0.973s
(2) amdgpu module loaded
before the patch:
real 0m35.365s
user 0m0.000s
sys 0m35.354s
after the patch:
real 0m1.049s
user 0m0.000s
sys 0m1.042s
Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Pasha Tatashin
|
120973e64d |
mm/debug_vm_pgtable: remove pte entry from the page table
commit fb5222aae64fe25e5f3ebefde8214dcf3ba33ca5 upstream.
Patch series "page table check fixes and cleanups", v5.
This patch (of 4):
The pte entry that is used in pte_advanced_tests() is never removed from
the page table at the end of the test.
The issue is detected by page_table_check, to repro compile kernel with
the following configs:
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y
During the boot the following BUG is printed:
debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:162!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
...
The entry should be properly removed from the page table before the page
is released to the free list.
Link: https://lkml.kernel.org/r/20220131203249.2832273-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20220131203249.2832273-2-pasha.tatashin@soleen.com
Fixes:
|
||
John Hubbard
|
9341457fdd |
Revert "mm/gup: small refactoring: simplify try_grab_page()"
commit c36c04c2e132fc39f6b658bf607aed4425427fd7 upstream. This reverts commit |
||
Shakeel Butt
|
6ebe994b54 |
memcg: better bounds on the memcg stats updates
commit 5b3be698a872c490dbed524f3e2463701ab21339 upstream.
Commit 11192d9c124d ("memcg: flush stats only if updated") added
tracking of memcg stats updates which is used by the readers to flush
only if the updates are over a certain threshold. However each
individual update can correspond to a large value change for a given
stat. For example adding or removing a hugepage to an LRU changes the
stat by thp_nr_pages (512 on x86_64).
Treating the update related to THP as one can keep the stat off, in
theory, by (thp_nr_pages * nr_cpus * CHARGE_BATCH) before flush.
To handle such scenarios, this patch adds consideration of the stat
update value as well instead of just the update event. In addition let
the asyn flusher unconditionally flush the stats to put time limit on
the stats skew and hopefully a lot less readers would need to flush.
Link: https://lkml.kernel.org/r/20211118065350.697046-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Shakeel Butt
|
6c8076660d |
memcg: unify memcg stat flushing
commit fd25a9e0e23b995fd0ba5e2f00a1099452cbc3cf upstream.
The memcg stats can be flushed in multiple context and potentially in
parallel too. For example multiple parallel user space readers for
memcg stats will contend on the rstat locks with each other. There is
no need for that. We just need one flusher and everyone else can
benefit.
In addition after
|
||
|
Shakeel Butt
|
7182935bd5 |
memcg: flush stats only if updated
commit 11192d9c124d58d66449b163ed0d2cdff03761a1 upstream. At the moment, the kernel flushes the memcg stats on every refault and also on every reclaim iteration. Although rstat maintains per-cpu update tree but on the flush the kernel still has to go through all the cpu rstat update tree to check if there is anything to flush. This patch adds the tracking on the stats update side to make flush side more clever by skipping the flush if there is no update. The stats update codepath is very sensitive performance wise for many workloads and benchmarks. So, we can not follow what the commit |
||
|
Alistair Popple
|
52b66f8189 |
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
commit 87c01d57fa23de82fff593a7d070933d08755801 upstream.
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com
Fixes:
|
||
Gang Li
|
19f76690fe |
shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode
commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream. Fix a data race in commit |
||
Baoquan He
|
e363ab3357 |
mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages
commit c4dc63f0032c77464fbd4e7a6afc22fa6913c4a7 upstream. In kdump kernel of x86_64, page allocation failure is observed: kworker/u2:2: page allocation failure: order:0, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 55 Comm: kworker/u2:2 Not tainted 5.16.0-rc4+ #5 Hardware name: AMD Dinar/Dinar, BIOS RDN1505B 06/05/2013 Workqueue: events_unbound async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x48/0x5e warn_alloc.cold+0x72/0xd6 __alloc_pages_slowpath.constprop.0+0xc69/0xcd0 __alloc_pages+0x1df/0x210 new_slab+0x389/0x4d0 ___slab_alloc+0x58f/0x770 __slab_alloc.constprop.0+0x4a/0x80 kmem_cache_alloc_trace+0x24b/0x2c0 sr_probe+0x1db/0x620 ...... device_add+0x405/0x920 ...... __scsi_add_device+0xe5/0x100 ata_scsi_scan_host+0x97/0x1d0 async_run_entry_fn+0x30/0x130 process_one_work+0x1e8/0x3c0 worker_thread+0x50/0x3b0 ? rescuer_thread+0x350/0x350 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Mem-Info: ...... The above failure happened when calling kmalloc() to allocate buffer with GFP_DMA. It requests to allocate slab page from DMA zone while no managed pages at all in there. sr_probe() --> get_capabilities() --> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA); Because in the current kernel, dma-kmalloc will be created as long as CONFIG_ZONE_DMA is enabled. However, kdump kernel of x86_64 doesn't have managed pages on DMA zone since commit |
||
|
Baoquan He
|
240e8d331a |
mm_zone: add function to check if managed dma zone exists
commit 62b3107073646e0946bd97ff926832bafb846d17 upstream. Patch series "Handle warning of allocation failure on DMA zone w/o managed pages", v4. **Problem observed: On x86_64, when crash is triggered and entering into kdump kernel, page allocation failure can always be seen. --------------------------------- DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 1 Comm: swapper/0 Call Trace: dump_stack+0x7f/0xa1 warn_alloc.cold+0x72/0xd6 ...... __alloc_pages+0x24d/0x2c0 ...... dma_atomic_pool_init+0xdb/0x176 do_one_initcall+0x67/0x320 ? rcu_read_lock_sched_held+0x3f/0x80 kernel_init_freeable+0x290/0x2dc ? rest_init+0x24f/0x24f kernel_init+0xa/0x111 ret_from_fork+0x22/0x30 Mem-Info: ------------------------------------ ***Root cause: In the current kernel, it assumes that DMA zone must have managed pages and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not always true. E.g in kdump kernel of x86_64, only low 1M is presented and locked down at very early stage of boot, so that this low 1M won't be added into buddy allocator to become managed pages of DMA zone. This exception will always cause page allocation failure if page is requested from DMA zone. ***Investigation: This failure happens since below commit merged into linus's tree. |
||
SeongJae Park
|
ffe4a1ba1a |
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
commit ebb3f994dd92f8fb4d70c7541091216c1e10cb71 upstream.
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.
Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes:
|
||
Baokun Li
|
2f06c8293d |
kfence: fix memory leak when cat kfence objects
commit 0129ab1f268b6cf88825eae819b9b84aa0a85634 upstream.
Hulk robot reported a kmemleak problem:
unreferenced object 0xffff93d1d8cc02e8 (size 248):
comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
hex dump (first 32 bytes):
00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
seq_open+0x2a/0x80
full_proxy_open+0x167/0x1e0
do_dentry_open+0x1e1/0x3a0
path_openat+0x961/0xa20
do_filp_open+0xae/0x120
do_sys_openat2+0x216/0x2f0
do_sys_open+0x57/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff93d419854000 (size 4096):
comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
hex dump (first 32 bytes):
6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0
30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12-
backtrace:
seq_read_iter+0x313/0x440
seq_read+0x14b/0x1a0
full_proxy_read+0x56/0x80
vfs_read+0xa5/0x1b0
ksys_read+0xa0/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I find that we can easily reproduce this problem with the following
commands:
cat /sys/kernel/debug/kfence/objects
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
The leaked memory is allocated in the stack below:
do_syscall_64
do_sys_open
do_dentry_open
full_proxy_open
seq_open ---> alloc seq_file
vfs_read
full_proxy_read
seq_read
seq_read_iter
traverse ---> alloc seq_buf
And it should have been released in the following process:
do_syscall_64
syscall_exit_to_user_mode
exit_to_user_mode_prepare
task_work_run
____fput
__fput
full_proxy_release ---> free here
However, the release function corresponding to file_operations is not
implemented in kfence. As a result, a memory leak occurs. Therefore,
the solution to this problem is to implement the corresponding release
function.
Link: https://lkml.kernel.org/r/20211206133628.2822545-1-libaokun1@huawei.com
Fixes:
|
||
|
SeongJae Park
|
330c6117a8 |
mm/damon/dbgfs: protect targets destructions with kdamond_lock
commit 34796417964b8d0aef45a99cf6c2d20cebe33733 upstream.
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.
Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org
Reported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes:
|
||
Liu Shixin
|
c691e7575e |
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
commit 2a57d83c78f889bf3f54eede908d0643c40d5418 upstream.
Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying
get_any_page(). This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:737!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: release_pages+0x53f/0x840
Call Trace:
free_pages_and_swap_cache+0x64/0x80
tlb_flush_mmu+0x6f/0x220
unmap_page_range+0xe6c/0x12c0
unmap_single_vma+0x90/0x170
unmap_vmas+0xc4/0x180
exit_mmap+0xde/0x3a0
mmput+0xa3/0x250
do_exit+0x564/0x1470
do_group_exit+0x3b/0x100
__do_sys_exit_group+0x13/0x20
__x64_sys_exit_group+0x16/0x20
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in:
---[ end trace e99579b570fe0649 ]---
RIP: 0010:release_pages+0x53f/0x840
Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes:
|
||
Naoya Horiguchi
|
7a77e22fde |
mm, hwpoison: fix condition in free hugetlb page path
commit e37e7b0b3bd52ec4f8ab71b027bcec08f57f1b3b upstream.
When a memory error hits a tail page of a free hugepage,
__page_handle_poison() is expected to be called to isolate the error in
4kB unit, but it's not called due to the outdated if-condition in
memory_failure_hugetlb(). This loses the chance to isolate the error in
the finer unit, so it's not optimal. Drop the condition.
This "(p != head && TestSetPageHWPoison(head)" condition is based on the
old semantics of PageHWPoison on hugepage (where PG_hwpoison flag was
set on the subpage), so it's not necessray any more. By getting to set
PG_hwpoison on head page for hugepages, concurrent error events on
different subpages in a single hugepage can be prevented by
TestSetPageHWPoison(head) at the beginning of memory_failure_hugetlb().
So dropping the condition should not reopen the race window originally
mentioned in commit
|
||
Andrey Ryabinin
|
6b2cdcc8f5 |
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
commit 338635340669d5b317c7e8dcf4fff4a0f3651d87 upstream.
alloc_pages_vma() may try to allocate THP page on the local NUMA node
first:
page = __alloc_pages_node(hpage_node,
gfp | __GFP_THISNODE | __GFP_NORETRY, order);
And if the allocation fails it retries allowing remote memory:
if (!page && (gfp & __GFP_DIRECT_RECLAIM))
page = __alloc_pages_node(hpage_node,
gfp, order);
However, this retry allocation completely ignores memory policy nodemask
allowing allocation to escape restrictions.
The first appearance of this bug seems to be the commit
|
||
Manjong Lee
|
f987b61daa |
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
commit 3c376dfafbf7a8ea0dea212d095ddd83e93280bb upstream. Initialize min_ratio if it is set during bdi unregistration. This can prevent problems that may occur a when bdi is removed without resetting min_ratio. For example. 1) insert external sdcard 2) set external sdcard's min_ratio 70 3) remove external sdcard without setting min_ratio 0 4) insert external sdcard 5) set external sdcard's min_ratio 70 << error occur(can't set) Because when an sdcard is removed, the present bdi_min_ratio value will remain. Currently, the only way to reset bdi_min_ratio is to reboot. [akpm@linux-foundation.org: tweak comment and coding style] Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com Signed-off-by: Manjong Lee <mj0123.lee@samsung.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Changheun Lee <nanich.lee@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <seunghwan.hyun@samsung.com> Cc: <sookwan7.kim@samsung.com> Cc: <yt0928.kim@samsung.com> Cc: <junho89.kim@samsung.com> Cc: <jisoo2146.oh@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Gerald Schaefer
|
dd902bcec3 |
mm/slub: fix endianness bug for alloc/free_traces attributes
commit 005a79e5c254c3f60ec269a459cc41b55028c798 upstream.
On big-endian s390, the alloc/free_traces attributes produce endless
output, because of always 0 idx in slab_debugfs_show().
idx is de-referenced from *v, which points to a loff_t value, with
unsigned int idx = *(unsigned int *)v;
This will only give the upper 32 bits on big-endian, which remain 0.
Instead of only fixing this de-reference, during discussion it seemed
more appropriate to change the seq_ops so that they use an explicit
iterator in private loc_track struct.
This patch adds idx to loc_track, which will also fix the endianness
bug.
Link: https://lore.kernel.org/r/20211117193932.4049412-1-gerald.schaefer@linux.ibm.com
Link: https://lkml.kernel.org/r/20211126171848.17534-1-gerald.schaefer@linux.ibm.com
Fixes:
|
||
|
SeongJae Park
|
7d7e02563b |
mm/damon/core: fix fake load reports due to uninterruptible sleeps
commit 70e9274805fccfd175d0431a947bfd11ee7df40e upstream.
Because DAMON sleeps in uninterruptible mode, /proc/loadavg reports fake
load while DAMON is turned on, though it is doing nothing. This can
confuse users[1]. To avoid the case, this commit makes DAMON sleeps in
idle mode.
[1] https://lore.kernel.org/all/11868371.O9o76ZdvQC@natalenko.name/
Link: https://lkml.kernel.org/r/20211126145015.15862-3-sj@kernel.org
Fixes:
|
||
Nadav Amit
|
556d59293a |
hugetlbfs: flush TLBs correctly after huge_pmd_unshare
commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.
When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing. This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.
Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.
Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.
Fixes:
|
||
|
SeongJae Park
|
1e0d346be1 |
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
commit d78f3853f831eee46c6dbe726debf3be9e9c0d05 upstream.
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and
dbgfs_dirs using damon_dbgfs_lock. However, some of the code is
accessing the variables without the protection. This fixes it by
protecting all such accesses.
Link: https://lkml.kernel.org/r/20211110145758.16558-3-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
cda10b34ec |
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
commit db7a347b26fe05d2e8c115bb24dfd908d0252bc3 upstream.
Patch series "DAMON fixes".
This patch (of 2):
DAMON users can trigger below warning in '__alloc_pages()' by invoking
write() to some DAMON debugfs files with arbitrarily high count
argument, because DAMON debugfs interface allocates some buffers based
on the user-specified 'count'.
if (unlikely(order >= MAX_ORDER)) {
WARN_ON_ONCE(!(gfp & __GFP_NOWARN));
return NULL;
}
Because the DAMON debugfs interface code checks failure of the
'kmalloc()', this commit simply suppresses the warnings by adding
'__GFP_NOWARN' flag.
Link: https://lkml.kernel.org/r/20211110145758.16558-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211110145758.16558-2-sj@kernel.org
Fixes:
|
||
Ard Biesheuvel
|
4dfddb52ab |
kmap_local: don't assume kmap PTEs are linear arrays in memory
commit 825c43f50e3aa811a291ffcb40e02fbf6d91ba86 upstream.
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes:
|
||
Mina Almasry
|
b5069d44e2 |
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
commit cc30042df6fcc82ea18acf0dace831503e60a0b7 upstream.
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.
We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.
Link: https://lkml.kernel.org/r/20211117193825.378528-1-almasrymina@google.com
Fixes:
|
||
Rustam Kovhaev
|
11138d7349 |
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
commit 34dbc3aaf5d9e89ba6cc5e24add9458c21ab1950 upstream.
When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.
kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.
Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB
Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com
Fixes:
|
||
Michal Hocko
|
c15aeead24 |
mm, oom: do not trigger out_of_memory from the #PF
commit 60e2793d440a3ec95abb5d6d4fc034a4b480472d upstream. Any allocation failure during the #PF path will return with VM_FAULT_OOM which in turn results in pagefault_out_of_memory. This can happen for 2 different reasons. a) Memcg is out of memory and we rely on mem_cgroup_oom_synchronize to perform the memcg OOM handling or b) normal allocation fails. The latter is quite problematic because allocation paths already trigger out_of_memory and the page allocator tries really hard to not fail allocations. Anyway, if the OOM killer has been already invoked there is no reason to invoke it again from the #PF path. Especially when the OOM condition might be gone by that time and we have no way to find out other than allocate. Moreover if the allocation failed and the OOM killer hasn't been invoked then we are unlikely to do the right thing from the #PF context because we have already lost the allocation context and restictions and therefore might oom kill a task from a different NUMA domain. This all suggests that there is no legitimate reason to trigger out_of_memory from pagefault_out_of_memory so drop it. Just to be sure that no #PF path returns with VM_FAULT_OOM without allocation print a warning that this is happening before we restart the #PF. [VvS: #PF allocation can hit into limit of cgroup v1 kmem controller. This is a local problem related to memcg, however, it causes unnecessary global OOM kills that are repeated over and over again and escalate into a real disaster. This has been broken since kmem accounting has been introduced for cgroup v1 (3.8). There was no kmem specific reclaim for the separate limit so the only way to handle kmem hard limit was to return with ENOMEM. In upstream the problem will be fixed by removing the outdated kmem limit, however stable and LTS kernels cannot do it and are still affected. This patch fixes the problem and should be backported into stable/LTS.] Link: https://lkml.kernel.org/r/f5fd8dd8-0ad4-c524-5f65-920b01972a42@virtuozzo.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Vasily Averin
|
487a4c60c5 |
mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
commit 0b28179a6138a5edd9d82ad2687c05b3773c387b upstream.
Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3.
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It can be misused and allowed to trigger global OOM from inside
a memcg-limited container. On the other hand if memcg fails allocation,
called from inside #PF handler it triggers global OOM from inside
pagefault_out_of_memory().
To prevent these problems this patchset:
(a) removes execution of out_of_memory() from
pagefault_out_of_memory(), becasue nobody can explain why it is
necessary.
(b) allow memcg to fail allocation of dying/killed tasks.
This patch (of 3):
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory which in turn executes
out_out_memory() and can kill a random task.
An allocation might fail when the current task is the oom victim and
there are no memory reserves left. The OOM killer is already handled at
the page allocator level for the global OOM and at the charging level
for the memcg one. Both have much more information about the scope of
allocation/charge request. This means that either the OOM killer has
been invoked properly and didn't lead to the allocation success or it
has been skipped because it couldn't have been invoked. In both cases
triggering it from here is pointless and even harmful.
It makes much more sense to let the killed task die rather than to wake
up an eternally hungry oom-killer and send him to choose a fatter victim
for breakfast.
Link: https://lkml.kernel.org/r/0828a149-786e-7c06-b70a-52d086818ea3@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Vasily Averin
|
f1e83db27a |
memcg: prohibit unconditional exceeding the limit of dying tasks
commit a4ebf1b6ca1e011289677239a2a361fde4a88076 upstream.
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It is assumed that the amount of the memory charged by those
tasks is bound and most of the memory will get released while the task
is exiting. This is resembling a heuristic for the global OOM situation
when tasks get access to memory reserves. There is no global memory
shortage at the memcg level so the memcg heuristic is more relieved.
The above assumption is overly optimistic though. E.g. vmalloc can
scale to really large requests and the heuristic would allow that. We
used to have an early break in the vmalloc allocator for killed tasks
but this has been reverted by commit
|
||
|
Matthew Wilcox (Oracle)
|
6560e8cd86 |
mm/filemap.c: remove bogus VM_BUG_ON
commit d417b49fff3e2f21043c834841e8623a6098741d upstream.
It is not safe to check page->index without holding the page lock. It
can be changed if the page is moved between the swap cache and the page
cache for a shmem file, for example. There is a VM_BUG_ON below which
checks page->index is correct after taking the page lock.
Link: https://lkml.kernel.org/r/20210818144932.940640-1-willy@infradead.org
Fixes:
|
||
|
Miaohe Lin
|
3d6b113cbe |
mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration()
[ Upstream commit afe8605ca45424629fdddfd85984b442c763dc47 ]
There is one possible race window between zs_pool_dec_isolated() and
zs_unregister_migration() because wait_for_isolated_drain() checks the
isolated count without holding class->lock and there is no order inside
zs_pool_dec_isolated(). Thus the below race window could be possible:
zs_pool_dec_isolated zs_unregister_migration
check pool->destroying != 0
pool->destroying = true;
smp_mb();
wait_for_isolated_drain()
wait for pool->isolated_pages == 0
atomic_long_dec(&pool->isolated_pages);
atomic_long_read(&pool->isolated_pages) == 0
Since we observe the pool->destroying (false) before atomic_long_dec()
for pool->isolated_pages, waking pool->migration_wait up is missed.
Fix this by ensure checking pool->destroying happens after the
atomic_long_dec(&pool->isolated_pages).
Link: https://lkml.kernel.org/r/20210708115027.7557-1-linmiaohe@huawei.com
Fixes:
|
||
Marco Elver
|
93ce744100 |
kfence: always use static branches to guard kfence_alloc()
commit 07e8481d3c38f461d7b79c1d5c9afe013b162b0c upstream. Regardless of KFENCE mode (CONFIG_KFENCE_STATIC_KEYS: either using static keys to gate allocations, or using a simple dynamic branch), always use a static branch to avoid the dynamic branch in kfence_alloc() if KFENCE was disabled at boot. For CONFIG_KFENCE_STATIC_KEYS=n, this now avoids the dynamic branch if KFENCE was disabled at boot. To simplify, also unifies the location where kfence_allocation_gate is read-checked to just be inline in kfence_alloc(). Link: https://lkml.kernel.org/r/20211019102524.2807208-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |