The LKP bot reports the following issue:
WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL
Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y]
Selected by [y]:
- SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] &&
SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y]
This comes from having tristates being configured independently, when
in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF
choices: when the SOF code is compiled as built-in, the
CONFIG_SOUNDWIRE also needs to be 'y'.
The easiest fix is to replace the 'depends' with a 'select' and have a
single user selection to activate SoundWire on Intel platforms. This
still allows regmap to be compiled independently as a module.
This is just a temporary fix, the select/depend usage will be
revisited and the SOF Kconfig re-organized, as suggested by Arnd
Bergman.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a115ab9b8b ('ASoC: SOF: Intel: add build support for SoundWire')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210122005725.94163-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The earlier commit to fix runtime PM in case i915 init fails,
introduces a possibility to hit a page fault.
snd_hdac_ext_bus_device_exit() is designed to be called from
dev.release(). Calling it outside device reference counting, is
not safe and may lead to calling the device_exit() function
twice. Additionally, as part of ext_bus_device_init(), the device
is also registered with snd_hdac_device_register(). Thus before
calling device_exit(), the device must be removed from device
hierarchy first.
Fix the issue by rolling back init actions by calling
hdac_device_unregister() and then releasing device with put_device().
This matches with existing code in hdac-ext module.
To complete the fix, add handling for the case where
hda_codec_load_module() returns -ENODEV, and clean up the hdac_ext
resources also in this case.
In future work, hdac-ext interface should be extended to allow clients
more flexibility to handle the life-cycle of individual devices, beyond
just the current snd_hdac_ext_bus_device_remove(), which removes all
devices.
BugLink: https://github.com/thesofproject/linux/issues/2646
Reported-by: Jaroslav Kysela <perex@perex.cz>
Fixes: 6c63c954e1 ("ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210113150715.3992635-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
System takes a very long time to suspend after commit 215a22ed31
("ALSA: hda: Refactor codec PM to use direct-complete optimization"):
[ 90.065964] PM: suspend entry (s2idle)
[ 90.067337] Filesystems sync: 0.001 seconds
[ 90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 90.188713] OOM killer disabled.
[ 90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 90.190024] printk: Suspending console(s) (use no_console_suspend to debug)
[ 90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend
[ 321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[ 328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[ 329.490933] ACPI: EC: interrupt blocked
That commit keeps the codec suspended during the system suspend. However,
mute/micmute LED will clear codec's direct-complete flag by
dpm_clear_superiors_direct_complete().
This doesn't play well with SOF driver. When its runtime resume is
called for system suspend, hda_codec_jack_check() schedules
jackpoll_work which uses snd_hdac_is_power_on() to check whether codec
is suspended. Because the direct-complete path isn't taken,
pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns
false and jackpoll continues to run, and snd_hda_power_up_pm() cannot
power up an already suspended codec in multiple attempts, causes the
long delay on system suspend:
if (dev->power.direct_complete) {
if (pm_runtime_status_suspended(dev)) {
pm_runtime_disable(dev);
if (pm_runtime_status_suspended(dev)) {
pm_dev_dbg(dev, state, "direct-complete ");
goto Complete;
}
pm_runtime_enable(dev);
}
dev->power.direct_complete = false;
}
When direct-complete path is taken, snd_hdac_is_power_on() returns true
and hda_jackpoll_work() is skipped by accident. So this is still not
correct.
If we were to use snd_hdac_is_power_on() in system PM path,
pm_runtime_status_suspended() should be used instead of
pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may
change the outcome of snd_hdac_is_power_on().
Because devices suspend in reverse order (i.e. child first), it doesn't
make much sense to resume an already suspended codec from audio
controller. So avoid the issue by making sure jackpoll isn't used in
system PM process.
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.
So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module snd-intel-dspcfg, suggested by Jaroslav last year,
currently provide the means to select a PCI driver at run-time, based
on quirks, recommendations or user selection via a kernel
parameter. This capability removed a lot of confusions in
distributions and removed the need for recompilations to select legacy
HDaudio, SST or SOF drivers.
This patchset extends the concept to ACPI devices. This was driven by
the desire to at some point deprecate the Atom/SST driver for Baytrail
and Cherrytrail, which is no longer maintained by Intel. By having the
SOF driver enabled by distributions for Baytrail/Cherrytrail, we can
enable more end-user tests and make the transition easier for
distributions (likely in 2021 at this point).
This patchset provides the same solution for Broadwell, mainly to have
a single build for all Intel platforms. SOF on Broadwell remains an
option not recommended for distributions, as long as the 'catpt'
driver is maintained there is no burning desire to make SOF the
default on the three Broadwell-based platforms with the DSP
enabled.
Pierre-Louis Bossart (14):
ASoC: Intel: broadwell: add missing pm_ops
ASoC: Intel: bdw-rt5677: add missing pm_ops
ALSA: hda: intel-dsp-config: add helper for ACPI DSP driver selection
ASoC: soc-acpi: add helper to identify parent driver.
ASoC: Intel: boards: byt/cht: set card and driver name at run time
ASoC: Intel: byt/cht: set pm ops dynamically
ASoC: SOF: acpi: add dynamic selection of DSP driver
ASoC: Intel: Atom: add dynamic selection of DSP driver
ASoC: SOF: Intel: allow for coexistence between SOF and Atom/SST
drivers
ALSA: hda: intel-dsp-config: add Broadwell ACPI DSP driver selection
ASoC: Intel: broadwell: set card and driver name dynamically
ASoC: Intel: catpt: add dynamic selection of DSP driver
ASoC: SOF: Intel: allow for coexistence between SOF and catpt drivers
ALSA: hda: intel-dsp-config: ignore dsp_driver parameter for PCI
legacy devices
include/sound/intel-dsp-config.h | 7 ++
include/sound/soc-acpi.h | 6 +
sound/hda/intel-dsp-config.c | 111 +++++++++++++++++++
sound/soc/intel/Kconfig | 2 +
sound/soc/intel/atom/sst/sst_acpi.c | 8 ++
sound/soc/intel/boards/bdw-rt5650.c | 17 ++-
sound/soc/intel/boards/bdw-rt5677.c | 18 ++-
sound/soc/intel/boards/broadwell.c | 20 ++--
sound/soc/intel/boards/bytcht_cx2072x.c | 27 +++--
sound/soc/intel/boards/bytcht_da7213.c | 27 +++--
sound/soc/intel/boards/bytcht_es8316.c | 29 +++--
sound/soc/intel/boards/bytcr_rt5640.c | 30 +++--
sound/soc/intel/boards/bytcr_rt5651.c | 27 +++--
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 29 +++--
sound/soc/intel/boards/cht_bsw_nau8824.c | 29 +++--
sound/soc/intel/boards/cht_bsw_rt5645.c | 38 ++++---
sound/soc/intel/boards/cht_bsw_rt5672.c | 29 +++--
sound/soc/intel/catpt/device.c | 12 ++
sound/soc/sof/intel/Kconfig | 33 +++---
sound/soc/sof/sof-acpi-dev.c | 14 ++-
20 files changed, 392 insertions(+), 121 deletions(-)
--
2.25.1
SND_INTEL_DSP_CONFIG is selected by the HDaudio, Skylake and SOF
drivers. When the HDaudio link is not selected as a option, this
Kconfig option is not touched and will default to whatever other
drivers selected. In the case e.g. where HDaudio is compiled as
built-in, the linker will complain:
ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x5c): undefined reference to
`snd_intel_dsp_driver_probe'
Adding the select for all HDaudio platforms, regardless of whether
they rely on the HDaudio link or not, solves the problem.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 82d9d54a6c ('ALSA: hda: add Intel DSP configuration / probe code')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To provide backward compatibility to older systems, the SOF HDA driver
allows user to specify which HDMI codec driver to use at runtime via
kernel parameter. This mechanism has a subtle flaw in that it assumes
the codec drivers not to be loaded when the SOF PCI driver is loaded.
The problem is rooted in use of the hdev->type field.
snd_hdac_ext_bus_device_init() initializes this field to HDA_DEV_ASOC.
This signals the HDA core that ASoC drivers should be considered in
driver matching (hda_bus_match()). The SOF and SST drivers continue by
overriding this field to HDA_DEV_LEGACY and proceeding to load driver
modules with request_module(). Correct drivers will get loaded and
attached.
If however the codec drivers are already loaded when
snd_hdac_ext_bus_device_init() is called, the matching will not work as
expected as device type is still set to HDA_DEV_ASOC. Specifically if
hdac-hdmi is attached when machine driver is configured to use hdac-hda,
this leads to out-of-bounds memory access in
hda_dsp_hdmi_build_controls().
Fix the issue by adding codec type as a parameter to
snd_hdac_ext_bus_device_init() and ensuring type is set correctly from
the start.
Fixes: 139c7febad ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921100841.2882662-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
