Pull ARM SoC platform updates from Arnd Bergmann:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (aka
'owl') platform, a close relative of the S900 platform he adds for
arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
ARM: owl: smp: Drop bogus holding pen
ARM: owl: Drop custom machine
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
ARM: socfpga: Increase max number of GPIOs
ARM: stm32: Introduce MACH_STM32F469 flag
ARM: prima2: remove redundant select CPU_V7
ARM: davinci: fix const warnings
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
...
Pull spi updates from Mark Brown:
"There's only one big change in this release but it's a very big
change: Geert Uytterhoeven has implemented support for SPI slave mode.
This feature has been on the cards since the subsystem was originally
merged back in the mists of time so it's great that Geert stepped up
and finally implemented it.
- SPI slave support, together with wholesale renaming of SPI
controllers from master to controller which went surprisingly
smoothly. This is already used with Renesas SoCs and support is in
the works for i.MX too.
- New drivers for Meson SPICC and ST STM32"
* tag 'spi-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (57 commits)
spi: loopback-test: Fix kfree() NULL pointer error.
spi: loopback-test: fix spelling mistake: "reruning" -> "rerunning"
spi: sirf: fix spelling mistake: "registerred" -> "registered"
spi: stm32: fix potential dereference null return value
spi: stm32: enhance DMA error management
spi: stm32: add runtime PM support
spi: stm32: use normal conditional statements instead of ternary operator
spi: stm32: replace st, spi-midi with st, spi-midi-ns to fit bindings
spi: stm32: fix example with st, spi-midi-ns property
spi: stm32: fix compatible to fit with new bindings
spi: stm32: use SoC specific compatible
spi: rockchip: Disable Runtime PM when chip select is asserted
spi: rockchip: Set GPIO_SS flag to enable Slave Select with GPIO CS
spi: atmel: fix corrupted data issue on SAM9 family SoCs
spi: stm32: fix error check on mbr being -ve
spi: add driver for STM32 SPI controller
spi: Document the STM32 SPI bindings
spi/bcm63xx: Fix checkpatch warnings
spi: imx: Check for allocation failure earlier
spi: mediatek: add spi support for mt2712 IC
...
Pull hwmon updates from Guenter Roeck:
- Add PMBus client driver for IR35221
- Add support for NCT6795D to nct6775 driver
- Functional improvements to adt7475, aspeed-pwm-tacho, and ibmpowernv
drivers
- Minor fixes and cleanups in various drivers
* tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (22 commits)
hwmon: (aspeed-pwm-tacho) Poll with short sleeps.
hwmon: (aspeed-pwm-tacho) reduce fan_tach period
hwmon: (ibmpowernv) Add current(A) sensor
hwmon: (ibmpowernv) introduce a legacy_compatibles array
hwmon: (pwm-fan) Switch to new atomic PWM API
hwmon: (scpi) Fix the scale of SCP sensor readings
hwmon: (aspeed-pwm-tacho) Enable both edge measurement.
hwmon: (ibmpowernv) Add highest/lowest attributes to sensors
hwmon: (pmbus) move header file out of I2C realm
hwmon: (max6639) move header file out of I2C realm
hwmon: (ltc4245) move header file out of I2C realm
hwmon: (ds620) move header file out of I2C realm
hwmon: (ads1015) move header file out of I2C realm
hwmon: (adt7475) temperature smoothing
hwmon: (adt7475) add high frequency support
hwmon: (adt7475) fan stall prevention
hwmon: (adt7475) replace find_nearest() with find_closest()
hwmon: (pmbus) Add client driver for IR35221
hwmon: (nct6775) Add support for NCT6795D
hwmon: (nct6775) Improve fan detection
...
Pull char/misc updates from Greg KH:
"Here is the "big" char/misc driver patchset for 4.13-rc1.
Lots of stuff in here, a large thunderbolt update, w1 driver header
reorg, the new mux driver subsystem, google firmware driver updates,
and a raft of other smaller things. Full details in the shortlog.
All of these have been in linux-next for a while with the only
reported issue being a merge problem with this tree and the jc-docs
tree in the w1 documentation area"
* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
misc: apds990x: Use sysfs_match_string() helper
mei: drop unreachable code in mei_start
mei: validate the message header only in first fragment.
DocBook: w1: Update W1 file locations and names in DocBook
mux: adg792a: always require I2C support
nvmem: rockchip-efuse: add support for rk322x-efuse
nvmem: core: add locking to nvmem_find_cell
nvmem: core: Call put_device() in nvmem_unregister()
nvmem: core: fix leaks on registration errors
nvmem: correct Broadcom OTP controller driver writes
w1: Add subsystem kernel public interface
drivers/fsi: Add module license to core driver
drivers/fsi: Use asynchronous slave mode
drivers/fsi: Add hub master support
drivers/fsi: Add SCOM FSI client device driver
drivers/fsi/gpio: Add tracepoints for GPIO master
drivers/fsi: Add GPIO based FSI master
drivers/fsi: Document FSI master sysfs files in ABI
drivers/fsi: Add error handling for slave
drivers/fsi: Add tracepoints for low-level operations
...
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allow gpio 0 to be used for reset signalling, and instead use negative
errnos to disable the reset functionality.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Now that AVR32 is gone, platform_data are not used to initialize the driver
anymore, remove that path from the driver. Also remove the now unused
struct atmel_uart_data.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_ARCH_AT91 is enabled, but none of the specific SoC support
is in use, some at91 specific drivers fail to link:
drivers/tty/serial/atmel_serial.o: In function `atmel_serial_suspend':
atmel_serial.c:(.text.atmel_serial_suspend+0x1e): undefined reference to `at91_suspend_entering_slow_clock'
drivers/usb/host/ohci-at91.o: In function `ohci_hcd_at91_drv_suspend':
ohci-at91.c:(.text.ohci_hcd_at91_drv_suspend+0x12): undefined reference to `at91_suspend_entering_slow_clock'
drivers/usb/gadget/udc/at91_udc.o: In function `at91udc_suspend':
at91_udc.c:(.text.at91udc_suspend+0x26): undefined reference to `at91_suspend_entering_slow_clock'
This changes the at91_suspend_entering_slow_clock hack once more, adding
an alternative inline implementation that is used exactly in those cases
that don't provide the normal implementation.
Fixes: c1892c2379d2 ("ARM: at91: handle CONFIG_PM for armv7m configurations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The old RealView clock implementation is not used anymore
(nothing in the kernel calls realview_clk_init()) as we have
moved all clocks over to device tree. Delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The default display name is both unused and never set by platform data.
Remove default display name module parameter, platform data field and
runtime infrastructure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch
with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs.
The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII
or RMII. Either of these may connect directly to a host processor or
to an external PHY. The SGMII port may interface to a fiber optic transceiver.
This driver currently supports vlan, fdb, mdb & mirror dsa switch operations.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new DT property, nxp,inverted-out, to invert the polarity
of the output.
Tested on PCA9634.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here, just a couple of small bugfixes,
improvements and cleanups.
- fix handling of probing errors in omapfb (Arvind Yadav)
- remove incorrect __exit markups in few drivers (Dmitry Torokhov)
- fix boot time logo support for drivers using deferred probe
(Takeshi Kihara)
- fix DMA allocation size for ARM CLCD driver (Liam Beguin)
- add support for specifying size via xenstore in xen-frontfb
(Juergen Gross)
- support for AUS mode in imxfb driver (Martin Kaiser)
- fix buffer on stack usage in udlfb driver (Maksim Salau)
- probe failure path fixup in sm501fb driver (Alexey Khoroshilov)
- fix config dependency loop for stifb driver (Arnd Bergmann)
- misc cleanups (Joe Perches, Christophe Leroy, Karim Eshapa, Pushkar
Jambhlekar)"
* tag 'fbdev-v4.12' of git://github.com/bzolnier/linux:
fbdev: sti: don't select CONFIG_VT
drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macros
sm501fb: don't return zero on failure path in sm501fb_start()
video: fbdev: udlfb: Fix buffer on stack
video: console: Remove reference to CONFIG_8xx
dt-bindings: display: imx: entry for AUS mode
video: fbdev: imxfb: support AUS mode
drivers/video/fbdev: Fixing coding guidelines in acornfb.c
xen, fbfront: add support for specifying size via xenstore
video: ARM CLCD: fix dma allocation size
drivers/video: Convert remaining uses of pr_warning to pr_warn
video/logo: tidyup fb_logo_late_init initcall timing
video: fbdev: i810: remove incorrect __exit markups
video: fbdev: pmag-aa-fb: remove incorrect __exit markups
video: fbdev: pmagb-b-fb: remove incorrect __exit markups
video: fbdev: pmag-ba-fb: remove incorrect __exit markups
omapfb: dss: Handle return errors in dss_init_ports()
Pull IOMMU updates from Joerg Roedel:
- code optimizations for the Intel VT-d driver
- ability to switch off a previously enabled Intel IOMMU
- support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
IOMMUs
- header optimizations for IOMMU core code headers and a few fixes that
became necessary in other parts of the kernel because of that
- ACPI/IORT updates and fixes
- Exynos IOMMU optimizations
- updates for the IOMMU dma-api code to bring it closer to use per-cpu
iova caches
- new command-line option to set default domain type allocated by the
iommu core code
- another command line option to allow the Intel IOMMU switched off in
a tboot environment
- ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
Support for 16-bit ASIDs (was previously broken)
- various other small fixes and improvements
* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
soc/qbman: Move dma-mapping.h include to qman_priv.h
soc/qbman: Fix implicit header dependency now causing build fails
iommu: Remove trace-events include from iommu.h
iommu: Remove pci.h include from trace/events/iommu.h
arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
ACPI/IORT: Fix CONFIG_IOMMU_API dependency
iommu/vt-d: Don't print the failure message when booting non-kdump kernel
iommu: Move report_iommu_fault() to iommu.c
iommu: Include device.h in iommu.h
x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
iommu/arm-smmu: Correct sid to mask
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
omap3isp: Remove iommu_group related code
iommu/omap: Add iommu-group support
iommu/omap: Make use of 'struct iommu_device'
iommu/omap: Store iommu_dev pointer in arch_data
iommu/omap: Move data structures to omap-iommu.h
iommu/omap: Drop legacy-style device support
...
Pull x86 platform-drivers update from Darren Hart:
"This represents a significantly larger and more complex set of changes
than those of prior merge windows.
In particular, we had several changes with dependencies on other
subsystems which we felt were best managed through merges of immutable
branches, including one each from input, i2c, and leds. Two patches
for the watchdog subsystem are included after discussion with Wim and
Guenter following a collision in linux-next (this should be resolved
and you should only see these two appear in this pull request). These
are called out in the "External" section below.
Summary of changes:
- significant further cleanup of fujitsu-laptop and hp-wmi
- new model support for ideapad, asus, silead, and xiaomi
- new hotkeys for thinkpad and models using intel-vbtn
- dell keyboard backlight improvements
- build and dependency improvements
- intel * ipc fixes, cleanups, and api updates
- single isolated fixes noted below
External:
- watchdog: iTCO_wdt: Add PMC specific noreboot update api
- watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
- Merge branch 'ib/4.10-sparse-keymap-managed'
- Merge branch 'i2c/for-INT33FE'
- Merge branch 'linux-leds/dell-laptop-changes-for-4.12'
platform/x86:
- Add Intel Cherry Trail ACPI INT33FE device driver
- remove sparse_keymap_free() calls
- Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD
asus-wmi:
- try to set als by default
- fix cpufv sysfs file permission
acer-wmi:
- setup accelerometer when ACPI device was found
ideapad-laptop:
- Add IdeaPad V310-15ISK to no_hw_rfkill
- Add IdeaPad 310-15IKB to no_hw_rfkill
intel_pmc_ipc:
- use gcr mem base for S0ix counter read
- Fix iTCO_wdt GCS memory mapping failure
- Add pmc gcr read/write/update api's
- fix gcr offset
dell-laptop:
- Add keyboard backlight timeout AC settings
- Handle return error form dell_get_intensity.
- Protect kbd_state against races
- Refactor kbd_led_triggers_store()
hp-wireless:
- reuse module_acpi_driver
- add Xiaomi's hardware id to the supported list
intel-vbtn:
- add volume up and down
INT33FE:
- add i2c dependency
hp-wmi:
- Cleanup exit paths
- Do not shadow errors in sysfs show functions
- Use DEVICE_ATTR_(RO|RW) helper macros
- Refactor dock and tablet state fetchers
- Cleanup wireless get_(hw|sw)state functions
- Refactor redundant HPWMI_READ functions
- Standardize enum usage for constants
- Cleanup local variable declarations
- Do not shadow error values
- Fix detection for dock and tablet mode
- Fix error value for hp_wmi_tablet_state
fujitsu-laptop:
- simplify error handling in acpi_fujitsu_laptop_add()
- do not log LED registration failures
- switch to managed LED class devices
- reorganize LED-related code
- refactor LED registration
- select LEDS_CLASS
- remove redundant fields from struct fujitsu_bl
- account for backlight power when determining brightness
- do not log set_lcd_level() failures in bl_update_status()
- ignore errors when setting backlight power
- make disable_brightness_adjust a boolean
- clean up use_alt_lcd_levels handling
- sync brightness in set_lcd_level()
- simplify set_lcd_level()
- merge set_lcd_level_alt() into set_lcd_level()
- switch to a managed backlight device
- only handle backlight when appropriate
- update debug message logged by call_fext_func()
- rename call_fext_func() arguments
- simplify call_fext_func()
- clean up local variables in call_fext_func()
- remove keycode fields from struct fujitsu_bl
- model-dependent sparse keymap overrides
- use a sparse keymap for hotkey event generation
- switch to a managed hotkey input device
- refactor hotkey input device setup
- use a sparse keymap for brightness key events
- switch to a managed backlight input device
- refactor backlight input device setup
- remove pf_device field from struct fujitsu_bl
- only register platform device if FUJ02E3 is present
- add and remove platform device in separate functions
- simplify platform device attribute definitions
- remove backlight-related attributes from the platform device
- cleanup error labels in fujitsu_init()
- only register backlight device if FUJ02B1 is present
- sync backlight power status in acpi_fujitsu_laptop_add()
- register backlight device in a separate function
- simplify brightness key event generation logic
- decrease indentation in acpi_fujitsu_bl_notify()
intel-hid:
- Add missing ->thaw callback
- do not set parents of input devices explicitly
- remove redundant set_bit() call
- use devm_input_allocate_device() for HID events input device
- make intel_hid_set_enable() take a boolean argument
- simplify enabling/disabling HID events
silead_dmi:
- Add touchscreen info for Surftab Wintron 7.0
- Abort early if DMI does not match
- Do not treat all devices as i2c_clients
- Add entry for Insyde 7W tablets
- Constify properties arrays
intel_scu_ipc:
- Introduce intel_scu_ipc_raw_command()
- Introduce SCU_DEVICE() macro
- Remove redundant subarch check
- Rearrange init sequence
- Platform data is mandatory
asus-nb-wmi:
- Add wapf4 quirk for the X302UA
dell-*:
- Call new led hw_changed API on kbd brightness change
- Add a generic dell-laptop notifier chain
eeepc-laptop:
- Skip unknown key messages 0x50 0x51
thinkpad_acpi:
- add mapping for new hotkeys
- guard generic hotkey case"
* tag 'platform-drivers-x86-v4.12-1' of git://git.infradead.org/linux-platform-drivers-x86: (108 commits)
platform/x86: Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD
platform/x86: asus-wmi: try to set als by default
platform/x86: asus-wmi: fix cpufv sysfs file permission
platform/x86: acer-wmi: setup accelerometer when ACPI device was found
platform/x86: ideapad-laptop: Add IdeaPad V310-15ISK to no_hw_rfkill
platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read
platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure
watchdog: iTCO_wdt: Add PMC specific noreboot update api
watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
platform/x86: intel_pmc_ipc: Add pmc gcr read/write/update api's
platform/x86: intel_pmc_ipc: fix gcr offset
platform/x86: dell-laptop: Add keyboard backlight timeout AC settings
platform/x86: dell-laptop: Handle return error form dell_get_intensity.
platform/x86: hp-wireless: reuse module_acpi_driver
platform/x86: intel-vbtn: add volume up and down
platform/x86: INT33FE: add i2c dependency
platform/x86: hp-wmi: Cleanup exit paths
platform/x86: hp-wmi: Do not shadow errors in sysfs show functions
platform/x86: hp-wmi: Use DEVICE_ATTR_(RO|RW) helper macros
platform/x86: hp-wmi: Refactor dock and tablet state fetchers
...
Pull regulator updates from Mark Brown:
"Quite a lot going on with the regulator API for this release, much
more in the core than in the drivers for a change:
- Fixes for voltage change propagation through dumb power switches.
- A notification when regulators are enabled.
- A new settling time property for regulators where the time taken to
move to a new voltage is not related to the size of the change.
- Some reorganization of the Arizona drivers in preparation for
sharing the code with the next generation devices they've been
integrated with.
- Support for newer Freescale chips in the Anatop regulator.
- A new driver for voltage controlled regulators to cope with some
exciting ChromeOS hardware designs.
- Support for Rohm BD9571MWV-M and TI TPS65132"
* tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (51 commits)
regulator: Add ROHM BD9571MWV-M PMIC regulator driver
regulator: arizona-ldo1: Factor out generic initialization
regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona
regulator: arizona-ldo1: Move pdata into a separate structure
regulator: arizona-micsupp: Factor out generic initialization
regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona
regulator: arizona-micsupp: Move pdata into a separate structure
regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators
regulator: anatop: make regulator name property required
regulator: tps65023: Fix inverted core enable logic.
regulator: anatop: make sure regulator name is properly defined
regulator: core: Allow dummy regulators for supplies
regulator: core: Only propagate voltage changes to if it can change voltages
regulator: vctrl: Fix out of bounds array access for vctrl->vtable
regulator: tps65132: fix platform_no_drv_owner.cocci warnings
regulator: tps65132: Fix off-by-one for .max_register setting
regulator: anatop: set default voltage selector for pcie
regulator: tps65132: add device-tree binding
regulator: tps65132: add regulator driver for TI TPS65132
regulator: anatop: remove unneeded name field of struct anatop_regulator
...
In some SoCs, setting noreboot bit needs modification to
PMC GC registers. But not all PMC drivers allow other drivers
to memory map their GC region. This could create mem request
conflict in watchdog driver. So this patch adds facility to allow
PMC drivers to pass noreboot update function to watchdog
drivers via platform data.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some displays require setting AUS mode in the LDCD AUS Mode Control
Register to work with the imxfb driver. Like the value of the Panel
Configuration Register, the AUS mode setting depends on the display
mode.
Allow setting AUS mode from the device tree by adding a boolean
property. Make this property optional to keep the DT ABI stable.
AUS mode can be set only on imx21 and compatible chipsets.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The internal data-structures are scattered over various
header and C files. Consolidate them in omap-iommu.h.
While at this, add the kerneldoc comment for the missing
iommu domain variable and revise the iommu_arch_data name.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: revise kerneldoc comments]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All the supported boards that have OMAP IOMMU devices do support
DT boot only now. So, drop the support for the non-DT legacy-style
devices from the OMAP IOMMU driver. Couple of the fields from the
iommu platform data would no longer be required, so they have also
been cleaned up. The IOMMU platform data is still needed though for
performing reset management properly in a multi-arch environment.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ISL9305_MAX_REGULATOR is the last index used to access the init_data[]
array, so we need to add one to this last index to obtain the necessary
array size.
This fixes the following smatch error:
drivers/regulator/isl9305.c:160 isl9305_i2c_probe() error: buffer overflow 'pdata->init_data' 3 <= 3
Fixes: dec38b5ce6 ("regulator: isl9305: Add Intersil ISL9305/H driver")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- constify rtc_class_ops structures
New driver:
- STM32
Drivers:
- armada38x: fix errata, Armada 7K/8K support
- ds3232: fix wakeup support
- gemini: DT support
- m48t86: huge cleanup and platform_data removal
- mcp795: alarm support
- sun6i: proper oscillator handling
- tegra: proper clock handling
- tps65910: calibration support"
* tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits)
rtc: ds3232: Call device_init_wakeup before device_register
rtc: pcf2127: bulk read only date and time registers.
rtc: armada38x: Add support for Armada 7K/8K
rtc: armada38x: Prepare driver to manage different versions
rtc: ds3232: Add regmap max_register definition.
rtc: ds3232: Cleanup whitespace around register and bit definitions.
rtc: m48t86: remove unused platform_data
ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources
ARM: Orion5x: ts78xx: remove RTC detection
ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources
rtc: m48t86: verify that the RTC is actually present
rtc: m48t86: add NVRAM support
rtc: m48t86: allow driver to manage its resources
rtc: m48t86: shorten register name defines
bindings: rtc: correct wrong reference in required properties
rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
rtc: sun6i: extend test coverage
rtc: sun6i: Fix compatibility with old DT binding
rtc: snvs: add a missing write sync
rtc: bq32000: add support to enable disable the trickle charge FET bypass
...
Pull clk updates from Stephen Boyd:
"The usual collection of new drivers, non-critical fixes, and updates
to existing clk drivers. The bulk of the work is on Allwinner and
Rockchip SoCs, but there's also an Intel Atom driver in here too.
New Drivers:
- Tegra BPMP firmware
- Hisilicon hi3660 SoCs
- Rockchip rk3328 SoCs
- Intel Atom PMC
- STM32F746
- IDT VersaClock 5P49V5923 and 5P49V5933
- Marvell mv98dx3236 SoCs
- Allwinner V3s SoCs
Removed Drivers:
- Samsung Exynos4415 SoCs
Updates:
- Migrate ABx500 to OF
- Qualcomm IPQ4019 CPU clks and general PLL support
- Qualcomm MSM8974 RPM
- Rockchip non-critical fixes and clk id additions
- Samsung Exynos4412 CPUs
- Socionext UniPhier NAND and eMMC support
- ZTE zx296718 i2s and other audio clks
- Renesas CAN and MSIOF clks for R-Car M3-W
- Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
- TI CDCE913, CDCE937, and CDCE949 clk generators
- Marvell Armada ap806 CPU frequencies
- STM32F4* I2S/SAI support
- Broadcom BCM2835 DSI support
- Allwinner sun5i and A80 conversion to new style clk bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits)
clk: renesas: mstp: ensure register writes complete
clk: qcom: Do not drop device node twice
clk: mvebu: adjust clock handling for the CP110 system controller
clk: mvebu: Expand mv98dx3236-core-clock support
clk: zte: add i2s clocks for zx296718
clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()
clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i
clk: sunxi-ng: Check kzalloc() for errors and cleanup error path
clk: tegra: Add BPMP clock driver
clk: uniphier: add eMMC clock for LD11 and LD20 SoCs
clk: uniphier: add NAND clock for all UniPhier SoCs
ARM: dts: sun9i: Switch to new clock bindings
clk: sunxi-ng: Add A80 Display Engine CCU
clk: sunxi-ng: Add A80 USB CCU
clk: sunxi-ng: Add A80 CCU
clk: sunxi-ng: Support separately grouped PLL lock status register
clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
clk: qcom: SDHCI enablement on Nexus 5X / 6P
...
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
- fix for font color when console is switched to another fb driver
- deferred probing fixes for simplefb driver
- preparations to add support of an optional GPIO to enable panel for
ARM CLCD driver
- some improvements for ssd1307fb driver
- cleanups for OMAP fbdev LCD drivers
- misc fixes/cleanups for various fb drivers
* tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits)
video: fbdev: fsl-diu-fb: fix spelling mistake "palette"
fbdev: ssd1307fb: include linux/gpio/consumer.h
video: fbdev: fsl-diu-fb: remove impossible condition
video: fbdev: amifb: remove impossible condition
fbdev/ssd1307fb: clear screen in probe
fbdev/ssd1307fb: add support to enable VBAT
fbdev: ssd1307fb: Make reset gpio devicetree property optional
fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
fbdev: ssd1307fb: Start to use gpiod API for reset gpio
video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe()
video: fbdev: offb: switch to using for_each_node_by_type
video/console: use setup_timer and mod_timer instead of init_timer
fbdev: omap/lcd: Make callbacks optional
fbdev: omap/lcd: Staticize non-exported lcd_panel structs
fbdev: omap/lcd: Remove no-op driver callbacks
video/mbx: use simple_open()
video: fbdev: stifb: handle NULL return value from ioremap_nocache
video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
video: ARM CLCD: use panel device node for getting backlight and mode
...
Pull sound updates from Takashi Iwai:
"Here is the update of sound bits for 4.11: again at this time, no big
changes in ALSA and ASoC core but only cosmetic changes like
consitifaction.
Meanwhile, quite a lot of developments are seen in a few driver side.
ALSA Core:
- Clean up, consitification of some ops
HD-audio:
- A slight behavior change of single_cmd option
- Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
HP, and fixes for Lewisburg controller
- Realtek ALC299, ALC1220 codecs
Others:
- USB-audio: Tascam US-16x08 DSP mixer quirk
- Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
contains some updates in drm/i915 for the new platform binding
ASoC:
- Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
on Skylake and onwards, as well as more Baytrail / Cherrytrail
boards support
- Channel mapping support for HDMI
- Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
Nuvoton NAU8540.
* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
ALSA: usb-audio: Tidy up mixer_us16x08.c
ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
ALSA: usb-audio: purge needless variable length array
ALSA: x86: hdmi: select CONFIG_SND_PCM
ALSA: x86: Don't enable runtime PM as default
ALSA: x86: Use runtime PM autosuspend
ALSA: usb-audio: localize function without external linkage
ALSA: usb-audio: localize one-referrer variable
ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
ALSA: emu10k1: constify snd_emux_operators structure
ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
ASoC: nau8825: automatic BCLK and LRC divde in master mode
ASoC: hdac_hdmi: Add device id for Geminilake
ASoC: Intel: Skylake: Add Geminlake IDs
ASoC: rt298: Add DMI match for Geminilake reference platform
ASoC: Intel: Skylake: Check device type to get endpoint configuration
ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
...
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.11 cycle
Core changes:
- Augment fwnode_get_named_gpiod() to configure the GPIO pin
immediately after requesting it like all other APIs do. This is a
treewide change also updating all users.
- Pass a GPIO label down to gpiod_request() from
fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
correctly reflect the current in-kernel consumer of a pin taken
using this abstraction. This is a treewide change also updating all
users.
- Rename devm_get_gpiod_from_child() to
devm_fwnode_get_gpiod_from_child() to reflect the fact that this
function is operating on a fwnode object. This is a treewide change
also updating all users.
- Make it possible to take multiple GPIOs in a single hog of device
tree hogs.
- The refactorings switching GPIO chips to use the .set_config()
callback using standard pin control properties and providing a
backend into the pin control subsystem that were also merged into
the pin control tree naturally appear here too.
Testing instrumentation:
- A whole slew of cleanups and improvements to the mockup GPIO
driver. We now have an extended userspace test exercising the
subsystem, and we can inject interrupts etc from userspace to fully
test the core GPIO functionality.
New drivers:
- New driver for the Cortina Systems Gemini GPIO controller.
- New driver for the Exar XR17V352/354/358 chips.
- New driver for the ACCES PCI-IDIO-16 PCI GPIO card.
Driver changes:
- RCAR: set the irqchip parent device, add fine-grained runtime PM
support.
- pca953x: support optional RESET control line on the chip.
- DaVinci: cleanups and simplifications. Add support for multiple
instances.
- .set_multiple() and naming of lines on more or less all of the
ISA/PCI GPIO controllers.
- mcp23s08: refactored to use regmap as a first step to further
rewrites and modernizations"
* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
gpio: reintroduce devm_get_gpiod_from_child()
gpio: pci-idio-16: Fix PCI BAR index
gpio: pci-idio-16: Fix PCI device ID code
gpio: mockup: implement event injecting over debugfs
gpio: mockup: add a dummy irqchip
gpio: mockup: implement naming the lines
gpio: mockup: code shrink
gpio: mockup: readability tweaks
gpio: Add GPIO support for the ACCES PCI-IDIO-16
gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
gpio: Rename devm_get_gpiod_from_child()
gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
gpio: ws16c48: Add support for GPIO names
gpio: gpio-mm: Add support for GPIO names
gpio: 104-idio-16: Add support for GPIO names
gpio: 104-idi-48: Add support for GPIO names
gpio: 104-dio-48e: Add support for GPIO names
gpio: ws16c48: Remove unnecessary driver_data set
gpio: gpio-mm: Remove unnecessary driver_data set
gpio: 104-idio-16: Remove unnecessary driver_data set
...
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver patchset for 4.11-rc1.
Lots of different driver subsystems updated here: rework for the
hyperv subsystem to handle new platforms better, mei and w1 and extcon
driver updates, as well as a number of other "minor" driver updates.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
goldfish: Sanitize the broken interrupt handler
x86/platform/goldfish: Prevent unconditional loading
vmbus: replace modulus operation with subtraction
vmbus: constify parameters where possible
vmbus: expose hv_begin/end_read
vmbus: remove conditional locking of vmbus_write
vmbus: add direct isr callback mode
vmbus: change to per channel tasklet
vmbus: put related per-cpu variable together
vmbus: callback is in softirq not workqueue
binder: Add support for file-descriptor arrays
binder: Add support for scatter-gather
binder: Add extra size to allocator
binder: Refactor binder_transact()
binder: Support multiple /dev instances
binder: Deal with contexts in debugfs
binder: Support multiple context managers
binder: Split flat_binder_object
auxdisplay: ht16k33: remove private workqueue
auxdisplay: ht16k33: rework input device initialization
...
Pull dmaengine updates from Vinod Koul:
"This time we fairly boring and bit small update.
- Support for Intel iDMA 32-bit hardware
- deprecate broken support for channel switching in async_tx
- bunch of updates on stm32-dma
- Cyclic support for zx dma and making in generic zx dma driver
- Small updates to bunch of other drivers"
* tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
async_tx: deprecate broken support for channel switching
dmaengine: rcar-dmac: Widen DMA mask to 40 bits
dmaengine: sun6i: allow build on ARM64 platforms (sun50i)
dmaengine: Provide a wrapper for memcpy operations
dmaengine: zx: fix build warning
dmaengine: dw: we do support Merrifield SoC in PCI mode
dmaengine: dw: add support of iDMA 32-bit hardware
dmaengine: dw: introduce register mappings for iDMA 32-bit
dmaengine: dw: introduce block2bytes() and bytes2block()
dmaengine: dw: extract dwc_chan_pause() for future use
dmaengine: dw: replace convert_burst() with one liner
dmaengine: dw: register IRQ and DMA pool with instance ID
dmaengine: dw: Fix data corruption in large device to memory transfers
dmaengine: ste_dma40: indicate granularity on channels
dmaengine: ste_dma40: indicate directions on channels
dmaengine: stm32-dma: Add error messages if xlate fails
dmaengine: dw: pci: remove LPE Audio DMA ID
dmaengine: stm32-dma: Add max_burst support
dmaengine: stm32-dma: Add synchronization support
dmaengine: stm32-dma: Fix residue computation issue in cyclic mode
...
Pull media updates from Mauro Carvalho Chehab:
- new drivers:
- i.MX6 Video Data Order Adapter's (VDOA)
- Toshiba et8ek8 5MP sensor
- STM DELTA multi-format video decoder V4L2 driver
- SPI connected IR LED
- Mediatek IR remote receiver
- ZyDAS ZD1301 DVB USB interface driver
- new RC keymaps
- some very old LIRC drivers got removed from staging
- RC core gained support encoding IR scan codes
- DVB si2168 gained support for DVBv5 statistics
- lirc_sir driver ported to rc-core and promoted from staging
- other bug fixes, board additions and driver improvements
* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
[media] mtk-vcodec: fix build warnings without DEBUG
[media] zd1301: fix building interface driver without demodulator
[media] usbtv: add sharpness control
[media] cxusb: Use a dma capable buffer also for reading
[media] ttpci: address stringop overflow warning
[media] dvb-usb-v2: avoid use-after-free
[media] add Hama Hybrid DVB-T Stick support
[media] et8ek8: Fix compiler / Coccinelle warnings
[media] media: fix semicolon.cocci warnings
[media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
[media] v4l: of: check for unique lanes in data-lanes and clock-lanes
[media] coda/imx-vdoa: constify structs
[media] st-delta: debug: trace stream/frame information & summary
[media] st-delta: add mjpeg support
[media] st-delta: EOS (End Of Stream) support
[media] st-delta: rpmsg ipc support
[media] st-delta: add memory allocator helper functions
[media] st-delta: STiH4xx multi-format video decoder v4l2 driver
[media] MAINTAINERS: add st-delta driver
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
...
All users of this driver have been updated to allow the driver to
manage it's own resources and do the read/write operations internally.
The m48t86_ops are no longer used.
Remove the platform_data header and the support code in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
