On some Intel platforms, audio noise can be detected due to
high pcie speed switch latency.
This patch leaverages ppfeaturemask to fix to the highest pcie
speed then disable pcie switching.
v2:
coding style fix
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU introduce the new interface to enable light Secondary Bus Reset mode, driver
enable it on passthrough + XGMI configuration
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new MSG provide the interface for driver to enable/disable the Light Secondary Bus Reset
support from SMU. When enabled, SMU will only do minimum NBIO response to the SBR request and
leave the real HW reset to be handled by driver later. When disabled (default state),SMU will
pass the request to PSP for a HW reset
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CONFIG_DRM_AMD_DC_DCN3_0 has been folded into
CONFIG_DRM_AMD_DC_DCN and is not needed.
[How]
Drop CONFIG_DRM_AMD_DC_DCN3_0.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This recent change introduce SDMA interrupt info printing with irq->process function.
These functions do not require a set function to enable/disable the irq
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the pcie dpm has two problems.
1. Only the high dpm level speed/width can be overrided
if the requested values are out of the pcie capability.
2. The high dpm level is always overrided though sometimes
it's not necesarry.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IH function to allow caller to wait until ring entries are processed
until the checkpoint write pointer.
This will be primarily used by HMM to drain pending page fault interrupts
before memory unmap to prevent HMM from handling stale interrupts.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC needs to communicate with PM FW through GPU memory. In order
to do so we need to be able to allocate memory from within DC.
[How]
Call amdgpu_bo_create_kernel to allocate GPU memory and use a
list in amdgpu_display_manager to track our allocations so we
can clean them up later.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DGPU Navi, the wm_table.nv_entries are used. These entires are not
populated for DCN301 Vangogh APU, but instead wm_table.entries are.
[How]
Use DCN21 Renoir style wm calculations.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In passthrough configuration, hypervisior will trigger the SBR(Secondary bus reset) to the devices
without sync to each other. This could cause device hang since for XGMI configuration, all the devices
within the hive need to be reset at a limit time slot. This serial of patches try to solve this issue
by co-operate with new SMU which will only do minimum house keeping to response the SBR request but don't
do the real reset job and leave it to driver. Driver need to do the whole sw init and minimum HW init
to bring up the SMU and trigger the reset(possibly BACO) on all the ASICs at the same time
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gmc.xgmi.head list originally is designed for device list in the XGMI hive. Mix use it
for reset purpose will prevent the reset function to adjust XGMI device list which is required
in next change
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MQD might not be initialized duirng first init period if the device need to be reset
druing probe. Driver need to proper init them in gpu recovery period
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu driver may be in reset state during init which will not initialize the kfd,
driver need to initialize the KFD after reset by check the flag
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To initialize the framebuffer, call drm_gem_fb_init_with_funcs which
verifies that the BO size can fit the FB size by calculating the minimum
expected size of each plane.
The bug was caught using igt-gpu-tools test: kms_addfb_basic.too-high
and kms_addfb_basic.bo-too-small
Tested on ChromeOS Zork by turning on the display and running a YT
video.
=== Changes from v1 ===
1. Added new line under declarations.
2. Use C style comment.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'dce110_resource.h' included in 'dcn21_resource.c' is duplicated.
'hw_gpio.h' included in 'hw_factory_dce110.c' is duplicated.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'drm/drm_hdcp.h' included in 'amdgpu_dm.c' is duplicated.
It is also included in the 79th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When bitmap_empty() or feature->feature_num triggers an error,
no error return code of smu_v11_0_set_allowed_mask() is assigned.
To fix this bug, ret is assigned with -EINVAL as error return code.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The registers for the address of the cursor are aligned to 2KB, so all
cursor surfaces also need to be aligned to 2KB. Currently, the
provided cursor cache surface is not aligned, so we need a workaround
until alignment is enforced by the surface provider.
[How]
- round up surface address to nearest multiple of 2048
- current policy is to provide a much bigger cache size than
necessary,so this operation is safe
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panel control always programs instance 0. With multi eDP we need to
support multiple instances.
[How]
Use link index to set different instances for panel control.
Refactored LVTMA control to support multiple instances.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver get wrap around dmub trace data due to read pointer being
increased incorrectly when there are multiple interrupt
queues with very short interval
[How]
Check read/write pointer before copying data from ring buffer
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If interval of two interrupt from dmub outbox0 is too short,
some event might be skipped
[How]
Compare read pointer and write pointer until all the event
entry is processed
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
pflip interrupt would not be enabled promptly if a pipe is disabled
and re-enabled, causing flip_done timeout error during DP
compliance tests
[How]
Enable pflip interrupt upon pipe enablement
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some boot configurations we need to retrieve the currently
UEFI-set dppclk, but there was a typo in the calculation
[how]
Fix typo to make dpp_clk calculate off dpp_clk divider instead of
disp_clk
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On baco-enabled systems running virtual dal, can get set power
state when hw is not initialized
[How]
Skip DC hw part of setPowerState when hw not available
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Ported logic from dcn21 for reading in pipe fusing to dcn30.
Supported configurations are 1 and 6 pipes. Invalid fusing
will revert to 1 pipe being enabled.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some configurations don't have FB BAR enabled. Avoid reading ROM image
from FB BAR region in such cases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use pp_od_clk_voltage node to enable performance determinism and GFX
clock min/max range for aldebaran. This is to avoid overload of
pp_dpm_sclk and maintain consistency in user lib interfaces.
Ex: To enable perf determinism at 900MHz max gfx clock
1) echo perf_determinism > /sys/bus/pci/devices/.../power_dpm_force_performance_level
2) echo s 1 900 > /sys/bus/pci/devices/.../pp_od_clk_voltage
3) echo c > /sys/bus/pci/devices/.../pp_od_clk_voltage
Ex: To enable min 500MHz/max 900MHz gfx clocks
1) echo manual > "/sys/bus/pci/devices/.../power_dpm_force_performance_level"
2) echo s 0 500 > "/sys/bus/pci/devices/.../pp_od_clk_voltage"
3) echo s 1 900 > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
4) echo c > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets 'AMDGPU_GEM_CREATE_CPU_GTT_USWC' as input
parameter flag, during object creation of an imported DMA
buffer.
In absence of this flag:
1. Function amdgpu_display_supported_domains() doesn't add
AMDGPU_GEM_DOMAIN_GTT as supported domain.
2. Due to which, Function amdgpu_display_user_framebuffer_create()
refuses to create framebuffer for imported DMA buffers.
3. Due to which, AddFB() IOCTL fails.
4. Due to which, amdgpu_present_check_flip() check fails in DDX
5. Due to which DDX driver doesn't allow flips (goes to blitting)
6. Due to which setting Freesync/VRR property fails for PRIME buffers.
So, this patch finally enables Freesync with PRIME buffer offloading.
v2 (chk): instead of just checking the flag we copy it over if the
exporter is an amdgpu device as well.
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This temporarily reverts freesync video patches since it causes regression with
eDP displays. This patch is a squashed revert of the following patches:
6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
d10cd527f5 ("drm/amd/display: Add freesync video modes based on preferred modes")
0eb1af2e82 ("drm/amd/display: Add module parameter for freesync video mode")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran uses more than 4M runtime TMR. The current
hard coded 4M TMR is not big enough for Aldebaran.
Increase it to 8M.
v2: Only do 8M size for ALDEBARAN (Hawking)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Page tables in vram mapping to cpu is changed from uncached to
cached in A+A, the snoop bit in VM_CONTEXTx_PAGE_TABLE_BASE_ADDR/
PDE0s/PDE1s/PDE2s/PTE.TFs has to be set so gpuvm walker snoop
page table data out of CPU cache.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
