Changes in 5.10.36
bus: mhi: core: Fix check for syserr at power_up
bus: mhi: core: Clear configuration from channel context during reset
bus: mhi: core: Sanity check values from remote device before use
nitro_enclaves: Fix stale file descriptors on failed usercopy
dyndbg: fix parsing file query without a line-range suffix
s390/disassembler: increase ebpf disasm buffer size
s390/zcrypt: fix zcard and zqueue hot-unplug memleak
vhost-vdpa: fix vm_flags for virtqueue doorbell mapping
tpm: acpi: Check eventlog signature before using it
ACPI: custom_method: fix potential use-after-free issue
ACPI: custom_method: fix a possible memory leak
ftrace: Handle commands when closing set_ftrace_filter file
ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lld
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
arm64: dts: mt8173: fix property typo of 'phys' in dsi node
ecryptfs: fix kernel panic with null dev_name
fs/epoll: restore waking from ep_done_scan()
mtd: spi-nor: core: Fix an issue of releasing resources during read/write
Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
mtd: spinand: core: add missing MODULE_DEVICE_TABLE()
mtd: rawnand: atmel: Update ecc_stats.corrected counter
mtd: physmap: physmap-bt1-rom: Fix unintentional stack access
erofs: add unsupported inode i_format check
spi: stm32-qspi: fix pm_runtime usage_count counter
spi: spi-ti-qspi: Free DMA resources
scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()
scsi: mpt3sas: Block PCI config access from userspace during reset
mmc: uniphier-sd: Fix an error handling path in uniphier_sd_probe()
mmc: uniphier-sd: Fix a resource leak in the remove function
mmc: sdhci: Check for reset prior to DMA address unmap
mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based controllers
mmc: sdhci-tegra: Add required callbacks to set/clear CQE_EN bit
mmc: block: Update ext_csd.cache_ctrl if it was written
mmc: block: Issue a cache flush only when it's enabled
mmc: core: Do a power cycle when the CMD11 fails
mmc: core: Set read only for SD cards with permanent write protect bit
mmc: core: Fix hanging on I/O during system suspend for removable cards
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
cifs: Return correct error code from smb2_get_enc_key
cifs: fix out-of-bound memory access when calling smb3_notify() at mount point
cifs: detect dead connections only when echoes are enabled.
smb2: fix use-after-free in smb2_ioctl_query_info()
btrfs: handle remount to no compress during compression
x86/build: Disable HIGHMEM64G selection for M486SX
btrfs: fix metadata extent leak after failure to create subvolume
intel_th: pci: Add Rocket Lake CPU support
btrfs: fix race between transaction aborts and fsyncs leading to use-after-free
posix-timers: Preserve return value in clock_adjtime32()
fbdev: zero-fill colormap in fbcmap.c
cpuidle: tegra: Fix C7 idling state on Tegra114
bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
staging: wimax/i2400m: fix byte-order issue
spi: ath79: always call chipselect function
spi: ath79: remove spi-master setup and cleanup assignment
bus: mhi: core: Destroy SBL devices when moving to mission mode
crypto: api - check for ERR pointers in crypto_destroy_tfm()
crypto: qat - fix unmap invalid dma address
usb: gadget: uvc: add bInterval checking for HS mode
usb: webcam: Invalid size of Processing Unit Descriptor
x86/sev: Do not require Hypervisor CPUID bit for SEV guests
crypto: hisilicon/sec - fixes a printing error
genirq/matrix: Prevent allocation counter corruption
usb: gadget: f_uac2: validate input parameters
usb: gadget: f_uac1: validate input parameters
usb: dwc3: gadget: Ignore EP queue requests during bus reset
usb: xhci: Fix port minor revision
kselftest/arm64: mte: Fix compilation with native compiler
ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node
PCI: PM: Do not read power state in pci_enable_device_flags()
kselftest/arm64: mte: Fix MTE feature detection
ARM: dts: BCM5301X: fix "reg" formatting in /memory node
ARM: dts: ux500: Fix up TVK R3 sensors
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
x86/boot: Add $(CLANG_FLAGS) to compressed KBUILD_CFLAGS
efi/libstub: Add $(CLANG_FLAGS) to x86 flags
soc/tegra: pmc: Fix completion of power-gate toggling
arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
tee: optee: do not check memref size on return from Secure World
soundwire: cadence: only prepare attached devices on clock stop
perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors
perf/arm_pmu_platform: Fix error handling
random: initialize ChaCha20 constants with correct endianness
usb: xhci-mtk: support quirk to disable usb2 lpm
fpga: dfl: pci: add DID for D5005 PAC cards
xhci: check port array allocation was successful before dereferencing it
xhci: check control context is valid before dereferencing it.
xhci: fix potential array out of bounds with several interrupters
bus: mhi: core: Clear context for stopped channels from remove()
ARM: dts: at91: change the key code of the gpio key
tools/power/x86/intel-speed-select: Increase string size
platform/x86: ISST: Account for increased timeout in some cases
spi: dln2: Fix reference leak to master
spi: omap-100k: Fix reference leak to master
spi: qup: fix PM reference leak in spi_qup_remove()
usb: gadget: tegra-xudc: Fix possible use-after-free in tegra_xudc_remove()
usb: musb: fix PM reference leak in musb_irq_work()
usb: core: hub: Fix PM reference leak in usb_port_resume()
usb: dwc3: gadget: Check for disabled LPM quirk
tty: n_gsm: check error while registering tty devices
intel_th: Consistency and off-by-one fix
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
crypto: sun8i-ss - Fix PM reference leak when pm_runtime_get_sync() fails
crypto: sun8i-ce - Fix PM reference leak in sun8i_ce_probe()
crypto: stm32/hash - Fix PM reference leak on stm32-hash.c
crypto: stm32/cryp - Fix PM reference leak on stm32-cryp.c
crypto: sa2ul - Fix PM reference leak in sa_ul_probe()
crypto: omap-aes - Fix PM reference leak on omap-aes.c
platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
spi: sync up initial chipselect state
btrfs: do proper error handling in create_reloc_root
btrfs: do proper error handling in btrfs_update_reloc_root
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
drm: Added orientation quirk for OneGX1 Pro
drm/qxl: do not run release if qxl failed to init
drm/qxl: release shadow on shutdown
drm/ast: Fix invalid usage of AST_MAX_HWC_WIDTH in cursor atomic_check
drm/amd/display: changing sr exit latency
drm/ast: fix memory leak when unload the driver
drm/amd/display: Check for DSC support instead of ASIC revision
drm/amd/display: Don't optimize bandwidth before disabling planes
drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work
drm/amd/display/dc/dce/dce_aux: Remove duplicate line causing 'field overwritten' issue
scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe
scsi: lpfc: Fix pt2pt connection does not recover after LOGO
drm/amdgpu: Fix some unload driver issues
sched/pelt: Fix task util_est update filtering
kvfree_rcu: Use same set of GFP flags as does single-argument
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
media: ite-cir: check for receive overflow
media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIB
media: imx: capture: Return -EPIPE from __capture_legacy_try_fmt()
atomisp: don't let it go past pipes array
power: supply: bq27xxx: fix power_avg for newer ICs
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
extcon: arizona: Fix various races on driver unbind
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
media: gspca/sq905.c: fix uninitialized variable
power: supply: Use IRQF_ONESHOT
backlight: qcom-wled: Use sink_addr for sync toggle
backlight: qcom-wled: Fix FSC update issue for WLED5
drm/amdgpu: mask the xgmi number of hops reported from psp to kfd
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac
drm/amd/pm: fix workload mismatch on vega10
drm/amd/display: Fix UBSAN warning for not a valid value for type '_Bool'
drm/amd/display: DCHUB underflow counter increasing in some scenarios
drm/amd/display: fix dml prefetch validation
scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()
drm/vkms: fix misuse of WARN_ON
scsi: qla2xxx: Fix use after free in bsg
mmc: sdhci-esdhc-imx: validate pinctrl before use it
mmc: sdhci-pci: Add PCI IDs for Intel LKF
mmc: sdhci-brcmstb: Remove CQE quirk
ata: ahci: Disable SXS for Hisilicon Kunpeng920
drm/komeda: Fix bit check to import to value of proper type
nvmet: return proper error code from discovery ctrl
selftests/resctrl: Enable gcc checks to detect buffer overflows
selftests/resctrl: Fix compilation issues for global variables
selftests/resctrl: Fix compilation issues for other global variables
selftests/resctrl: Clean up resctrl features check
selftests/resctrl: Fix missing options "-n" and "-p"
selftests/resctrl: Use resctrl/info for feature detection
selftests/resctrl: Fix incorrect parsing of iMC counters
selftests/resctrl: Fix checking for < 0 for unsigned values
power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
scsi: smartpqi: Use host-wide tag space
scsi: smartpqi: Correct request leakage during reset operations
scsi: smartpqi: Add new PCI IDs
scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()
media: em28xx: fix memory leak
media: vivid: update EDID
drm/msm/dp: Fix incorrect NULL check kbot warnings in DP driver
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
media: tc358743: fix possible use-after-free in tc358743_remove()
media: adv7604: fix possible use-after-free in adv76xx_remove()
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove()
media: i2c: adv7842: fix possible use-after-free in adv7842_remove()
media: platform: sti: Fix runtime PM imbalance in regs_show
media: sun8i-di: Fix runtime PM imbalance in deinterlace_start_streaming
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
media: gscpa/stv06xx: fix memory leak
sched/fair: Ignore percpu threads for imbalance pulls
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
drm/msm/mdp5: Do not multiply vclk line count by 100
drm/amdgpu/ttm: Fix memory leak userptr pages
drm/radeon/ttm: Fix memory leak userptr pages
drm/amd/display: Fix debugfs link_settings entry
drm/amd/display: Fix UBSAN: shift-out-of-bounds warning
drm/amdkfd: Fix cat debugfs hang_hws file causes system crash bug
amdgpu: avoid incorrect %hu format string
drm/amd/display: Try YCbCr420 color when YCbCr444 fails
drm/amdgpu: fix NULL pointer dereference
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
scsi: lpfc: Fix error handling for mailboxes completed in MBX_POLL mode
scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic
mfd: intel-m10-bmc: Fix the register access range
mfd: da9063: Support SMBus and I2C mode
mfd: arizona: Fix rumtime PM imbalance on error
scsi: libfc: Fix a format specifier
perf: Rework perf_event_exit_event()
sched,fair: Alternative sched_slice()
block/rnbd-clt: Fix missing a memory free when unloading the module
s390/archrandom: add parameter check for s390_arch_random_generate
sched,psi: Handle potential task count underflow bugs more gracefully
power: supply: cpcap-battery: fix invalid usage of list cursor
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: usb-audio: Explicitly set up the clock selector
ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G7
ALSA: hda/realtek: GA503 use same quirks as GA401
ALSA: hda/realtek: fix mic boost on Intel NUC 8
ALSA: hda/realtek - Headset Mic issue on HP platform
ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
tools/power/turbostat: Fix turbostat for AMD Zen CPUs
btrfs: fix race when picking most recent mod log operation for an old root
arm64/vdso: Discard .note.gnu.property sections in vDSO
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
fs: fix reporting supported extra file attributes for statx()
virtiofs: fix memory leak in virtio_fs_probe()
kcsan, debugfs: Move debugfs file creation out of early init
ubifs: Only check replay with inode type to judge if inode linked
f2fs: fix error handling in f2fs_end_enable_verity()
f2fs: fix to avoid out-of-bounds memory access
mlxsw: spectrum_mr: Update egress RIF list before route's action
openvswitch: fix stack OOB read while fragmenting IPv4 packets
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
NFS: fs_context: validate UDP retrans to prevent shift out-of-bounds
NFS: Don't discard pNFS layout segments that are marked for return
NFSv4: Don't discard segments marked for return in _pnfs_return_layout()
Input: ili210x - add missing negation for touch indication on ili210x
jffs2: Fix kasan slab-out-of-bounds problem
jffs2: Hook up splice_write callback
powerpc/powernv: Enable HAIL (HV AIL) for ISA v3.1 processors
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
intel_th: pci: Add Alder Lake-M support
tpm: efi: Use local variable for calculating final log size
tpm: vtpm_proxy: Avoid reading host log when using a virtual device
crypto: arm/curve25519 - Move '.fpu' after '.arch'
crypto: rng - fix crypto_rng_reset() refcounting when !CRYPTO_STATS
md/raid1: properly indicate failure when ending a failed write request
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
fuse: fix write deadlock
exfat: fix erroneous discard when clear cluster bit
sfc: farch: fix TX queue lookup in TX flush done handling
sfc: farch: fix TX queue lookup in TX event handling
security: commoncap: fix -Wstringop-overread warning
Fix misc new gcc warnings
jffs2: check the validity of dstlen in jffs2_zlib_compress()
smb3: when mounting with multichannel include it in requested capabilities
smb3: do not attempt multichannel to server which does not support it
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
kbuild: update config_data.gz only when the content of .config is changed
ext4: annotate data race in start_this_handle()
ext4: annotate data race in jbd2_journal_dirty_metadata()
ext4: fix check to prevent false positive report of incorrect used inodes
ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
ext4: fix error code in ext4_commit_super
ext4: fix ext4_error_err save negative errno into superblock
ext4: fix error return code in ext4_fc_perform_commit()
ext4: allow the dax flag to be set and cleared on inline directories
ext4: Fix occasional generic/418 failure
media: dvbdev: Fix memory leak in dvb_media_device_free()
media: dvb-usb: Fix use-after-free access
media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()
media: staging/intel-ipu3: Fix memory leak in imu_fmt
media: staging/intel-ipu3: Fix set_fmt error handling
media: staging/intel-ipu3: Fix race condition during set_fmt
media: v4l2-ctrls: fix reference to freed memory
media: venus: hfi_parser: Don't initialize parser on v1
usb: gadget: dummy_hcd: fix gpf in gadget_setup
usb: gadget: Fix double free of device descriptor pointers
usb: gadget/function/f_fs string table fix for multiple languages
usb: dwc3: gadget: Remove FS bInterval_m1 limitation
usb: dwc3: gadget: Fix START_TRANSFER link state check
usb: dwc3: core: Do core softreset when switch mode
usb: dwc2: Fix session request interrupt handler
tty: fix memory leak in vc_deallocate
rsi: Use resume_noirq for SDIO
tools/power turbostat: Fix offset overflow issue in index converting
tracing: Map all PIDs to command lines
tracing: Restructure trace_clock_global() to never block
dm persistent data: packed struct should have an aligned() attribute too
dm space map common: fix division bug in sm_ll_find_free_block()
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
thermal/drivers/cpufreq_cooling: Fix slab OOB issue
thermal/core/fair share: Lock the thermal zone while looping over instances
Linux 5.10.36
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7b8075de5edd8de69205205cddb9a3273d7d0810
Steps on the way to 5.9-rc1
Resolves conflicts in:
drivers/irqchip/qcom-pdc.c
include/linux/device.h
net/xfrm/xfrm_state.c
security/lsm_audit.c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4aeb3d04f4717714a421721eb3ce690c099bb30a
Raw Gadget is currently unable to stall/halt/wedge gadget endpoints,
which is required for proper emulation of certain USB classes.
This patch adds a few more ioctls:
- USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint #0 when
there's a pending setup request for it.
- USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status
on non-control non-isochronous endpoints.
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Currently automatic gadget endpoint selection based on required features
doesn't work. Raw Gadget tries iterating over the list of available
endpoints and finding one that has the right direction and transfer type.
Unfortunately selecting arbitrary gadget endpoints (even if they satisfy
feature requirements) doesn't work, as (depending on the UDC driver) they
might have fixed addresses, and one also needs to provide matching
endpoint addresses in the descriptors sent to the host.
The composite framework deals with this by assigning endpoint addresses
in usb_ep_autoconfig() before enumeration starts. This approach won't work
with Raw Gadget as the endpoints are supposed to be enabled after a
set_configuration/set_interface request from the host, so it's too late to
patch the endpoint descriptors that had already been sent to the host.
For Raw Gadget we take another approach. Similarly to GadgetFS, we allow
the user to make the decision as to which gadget endpoints to use.
This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that
exposes information about all non-control endpoints that a currently
connected UDC has. This information includes endpoints addresses, as well
as their capabilities and limits to allow the user to choose the most
fitting gadget endpoint.
The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint
validation routine usb_gadget_ep_match_desc().
These changes affect the portability of the gadgets that use Raw Gadget
when running on different UDCs. Nevertheless, as long as the user relies
on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically
choose endpoint addresses, UDC-agnostic gadgets can still be written with
Raw Gadget.
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
In a quest to make the huge -rc1 merge easier to handle and bisect,
merge the first chunk of 5.7-rc1 patches into android-mainline.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib54436e9515660a4c0c25c49c21bfb399eb57921
USB Raw Gadget is a kernel module that provides a userspace interface for
the USB Gadget subsystem. Essentially it allows to emulate USB devices
from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is
currently a strictly debugging feature and shouldn't be used in
production.
Raw Gadget is similar to GadgetFS, but provides a more low-level and
direct access to the USB Gadget layer for the userspace. The key
differences are:
1. Every USB request is passed to the userspace to get a response, while
GadgetFS responds to some USB requests internally based on the provided
descriptors. However note, that the UDC driver might respond to some
requests on its own and never forward them to the Gadget layer.
2. GadgetFS performs some sanity checks on the provided USB descriptors,
while Raw Gadget allows you to provide arbitrary data as responses to
USB requests.
3. Raw Gadget provides a way to select a UDC device/driver to bind to,
while GadgetFS currently binds to the first available UDC.
4. Raw Gadget uses predictable endpoint names (handles) across different
UDCs (as long as UDCs have enough endpoints of each required transfer
type).
5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This merges Linus's tree as of commit b41dae061b ("Merge tag
'xfs-5.4-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux")
into android-mainline.
This "early" merge makes it easier to test and handle merge conflicts
instead of having to wait until the "end" of the merge window and handle
all 10000+ commits at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I6bebf55e5e2353f814e3c87f5033607b1ae5d812
Set the recommended BESL deep and baseline values based on the gadget's
configuration parameters to the extended BOS descriptor. This feature
helps to optimize power savings by maximizing the opportunity for longer
L1 residency time.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.
The exception note is missing in some UAPI headers.
Some of them slipped in by the treewide conversion commit b24413180f
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:
$ git show --oneline b24413180f -- arch/x86/include/uapi/asm/
I believe they are not intentional, and should be fixed too.
This patch was generated by the following script:
git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
while read file
do
sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
done
After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.
$ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extension Unit (XU) is used to have a compatible layout with
Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it
for parsing the descriptors. Meanwhile, on UAC2, XU became slightly
incompatible with PU; namely, XU has a one-byte bmControls bitmap
while PU has two bytes bmControls bitmap. This incompatibility
results in the read of a wrong address for the last iExtension field,
which ended up with an incorrect string for the mixer element name, as
recently reported for Focusrite Scarlett 18i20 device.
This patch corrects this misalignment by introducing a couple of new
macros and calling them depending on the descriptor type.
Fixes: 23caaf19b1 ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Reported-by: Stefan Sauer <ensonic@hora-obscura.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Bug: 63740241
Bug: 120441124
Change-Id: I67964b50d278f3c0471d47efbb7b0973a3502681
[badhri: f_accessory is being migrated to userspace.]
Signed-off-by: Mike Lockwood <lockwood@android.com>
[AmitP: Folded following android-4.9 commit changes into this patch
ceb2f0aac624 ("ANDROID: usb: gadget: accessory: Fix section mismatch")
Parts of e27543931009 ("ANDROID: usb: gadget: Fixes and hacks to make android usb gadget compile on 3.8")
1b07ec751563 ("ANDROID: drivers: usb: gadget: 64-bit related type fixes")]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
[astrachan: Folded the following changes into this patch:
9d5891d516e2 ("ANDROID: usb: gadget: f_accessory: Add ACCESSORY_SET_AUDIO_MODE control request and ioctl")
dc66cfce9622 ("ANDROID: usb: gadget: f_accessory: Add support for HID input devices")
5f1ac9c2871b ("ANDROID: usb: gadget: f_accessory: move userspace interface to uapi")
9a6241722cd8 ("ANDROID: usb: gadget: f_accessory: Enabled Zero Length Packet (ZLP) for acc_write")
31a0ecd5a825 ("ANDROID: usb: gadget: f_accessory: check for accessory device before disconnecting HIDs")
580721fa6cbc ("ANDROID: usb: gadget: f_accessory: Migrate to USB_FUNCTION API")
7f407172fb28 ("ANDROID: usb: gadget: f_accessory: Fix for UsbAccessory clean unbind.")
ebc98ac5a22f ("ANDROID: usb: gadget: f_accessory: fix false disconnect due to a signal sent to the reading process")
71c6dc5ffdab ("ANDROID: usb: gadget: f_accessory: assign no-op request complete callbacks")
675047ee68e9 ("ANDROID: usb: gadget: f_accessory: Move gadget functions code")
b2bedaa5c7df ("CHROMIUM: usb: gadget: f_accessory: add .raw_request callback")]
Signed-off-by: Alistair Strachan <astrachan@google.com>
Felipe writes:
USB for v4.20
With 63 non-merge commits, this is not a large merge window for USB
peripheral. The largest changes go to the UVC gadget driver which a
few folks have been improving.
Apart from UVC changes, we have a few more devices being added to
Renesas USB3 and DWC3 controller drivers and a couple minor bug fixes
on other drivers.
* tag 'usb-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (63 commits)
USB: net2280: Remove ->disconnect() callback from net2280_pullup()
usb: dwc2: disable power_down on rockchip devices
usb: gadget: udc: renesas_usb3: add support for r8a77990
dt-bindings: usb: renesas_usb3: add bindings for r8a77990
usb: gadget: udc: renesas_usb3: Add r8a774a1 support
usb: gadget: udc: renesas_usb3: Fix b-device mode for "workaround"
usb: dwc2: gadget: Add handler for WkupAlert interrupt
usb: dwc2: gadget: enable WKUP_ALERT interrupt
usb: dwc2: gadget: Program GREFCLK register
usb: dwc2: gadget: Add parameters for GREFCLK register
usb: dwc2: Add definitions for new registers
usb: dwc2: Update target (u)frame calculation
usb: dwc2: Add dwc2_gadget_dec_frame_num_by_one() function
usb: dwc2: Add core parameter for service interval support
usb: dwc2: Update registers definitions to support service interval
usb: renesas_usbhs: add support for R-Car E3
dt-bindings: usb: renesas_usbhs: add bindings for r8a77990
usb: renesas_usbhs: rcar3: Use OTG mode for R-Car D3
Revert "usb: renesas_usbhs: set the mode by using extcon state for non-otg channel"
usb: gadget: f_uac2: disable IN/OUT ep if unused
...
Add ioctl USBTMC_IOCTL_API_VERSION to get current API version
of usbtmc driver.
This is to allow an instrument library to determine whether
the driver API is compatible with the implementation.
The API may change in future versions. Therefore the macro
USBTMC_API_VERSION should be incremented when changing tmc.h
with new flags, ioctls or when changing a significant behavior
of the driver.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add ioctl USBTMC_IOCTL_MSG_IN_ATTR that returns the specific
bmTransferAttributes field of the last DEV_DEP_MSG_IN Bulk-IN
header. This header is received by the read() function. The
meaning of the (u8) bitmap bmTransferAttributes is:
Bit 0 = EOM flag is set when the last transfer of a USBTMC
message is received.
Bit 1 = is set when the last byte is a termchar (e.g. '\n').
Note that this bit is always zero when the device does not support
the termchar feature or when termchar detection is not enabled
(see ioctl USBTMC_IOCTL_CONFIG_TERMCHAR).
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wait until an SRQ (service request) is received on the interrupt pipe
or until the given period of time is expired. In contrast to the
poll() function this ioctl does not return when other (a)synchronous
I/O operations fail with EPOLLERR.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ioctl USBTMC_IOCTL_CLEANUP_IO kills all submitted urbs to OUT
and IN bulk, and clears all received data from IN bulk. Internal
transfer counters and error states are reset.
An application should use this ioctl after an asnychronous transfer
was canceled and/or error handling has finished.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ioctl USBTMC_IOCTL_CANCEL_IO stops and kills all flying urbs of
last USBTMC_IOCTL_READ and USBTMC_IOCTL_WRITE function calls.
A subsequent call to USBTMC_IOCTL_READ or
USBTMC_IOCTL_WRITE_RESULT returns -ECANCELED with
information about current transferred data.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USBTMC_IOCTL_READ call provides for generic synchronous and
asynchronous reads on bulk IN to implement vendor specific library
routines.
Depending on transfer_size the function submits one or more urbs (up
to 16) each with a size of up to 4kB.
The flag USBTMC_FLAG_IGNORE_TRAILER can be used when the transmission
size is already known. Then the function does not truncate the
transfer_size to a multiple of 4 kB, but does reserve extra space
to receive the final short or zero length packet. Note that the
instrument is allowed to send up to wMaxPacketSize - 1 bytes at the
end of a message to avoid sending a zero length packet.
With flag USBTMC_FLAG_ASYNC the ioctl is non blocking. When no
received data is available, the read function submits as many urbs as
needed to receive transfer_size bytes. However the number of flying
urbs (=4kB) is limited to 16 even with subsequent calls of this ioctl.
Returns -EAGAIN when non blocking and no data is received.
Signals EPOLLIN | EPOLLRDNORM when asynchronous urbs are ready to
be read.
In non blocking mode the usbtmc_message.message pointer may be NULL
and the ioctl just submits urbs to initiate receiving data. However if
data is already available due to a previous non blocking call the ioctl
will return -EINVAL when the message pointer is NULL.
This ioctl does not support compatibility for 32 bit
applications running on 64 bit systems. However all other
convenient ioctls of the USBTMC driver can still be used in 32
bit applications as well. Note that 32 bit applications running
on 32 bit target systems are not affected by this limitation.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ioctl USBTMC_IOCTL_WRITE_RESULT copies current out_transfer_size
to given __u32 pointer and returns current out_status of the last
(asnynchronous) USBTMC_IOCTL_WRITE call.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new ioctl USBTMC_IOCTL_WRITE sends a generic message to bulk OUT.
This ioctl is used for vendor specific or asynchronous I/O as well.
The message is split into chunks of 4k (page size).
Message size is aligned to 32 bit boundaries.
With flag USBTMC_FLAG_ASYNC the ioctl is non blocking.
With flag USBTMC_FLAG_APPEND additional urbs are queued and
out_status/out_transfer_size is not reset. EPOLLOUT | EPOLLWRNORM
is signaled when all submitted urbs are completed.
Flush flying urbs when file handle is closed or device is
suspended or reset.
This ioctl does not support compatibility for 32 bit
applications running on 64 bit systems. However all other
convenient ioctls of the USBTMC driver can still be used in 32
bit applications as well. Note that 32 bit applications running
on 32 bit target systems are not affected by this limitation.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add USBTMC_IOCTL_CTRL_REQUEST to send arbitrary requests on the
control pipe. Used by specific applications of IVI Foundation,
Inc. to implement VISA API functions: viUsbControlIn/Out.
The maximum length of control request is set to 4k.
This ioctl does not support compatibility for 32 bit
applications running on 64 bit systems. However all other
convenient ioctls of the USBTMC driver can still be used in 32
bit applications as well. Note that 32 bit applications running
on 32 bit target systems are not affected by this limitation.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.
Nothing huge but there was a lot of work that happened this
development cycle:
- lots of type-c work, with drivers graduating out of staging, and
displayport support being added.
- new PHY drivers
- the normal collection of gadget driver updates and fixes
- code churn to work on the urb handling path, using irqsave()
everywhere in anticipation of making this codepath a lot simpler in
the future.
- usbserial driver fixes and reworks
- other misc changes
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
USB: serial: pl2303: add a new device id for ATEN
usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
usb: dwc3: gadget: Check MaxPacketSize from descriptor
usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
usb: dwc2: Turn on uframe_sched on "amlogic" platforms
usb: dwc2: Turn on uframe_sched on "his" platforms
usb: dwc2: Turn on uframe_sched on "bcm" platforms
usb: dwc2: gadget: ISOC's starting flow improvement
usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
usb: dwc3: core: Enable AutoRetry feature in the controller
usb: dwc3: Set default mode for dwc_usb31
usb: gadget: udc: renesas_usb3: Add register of usb role switch
usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
usb: dwc2: Modify dwc2_readl/writel functions prototype
usb: dwc3: pci: Intel Merrifield can be host
usb: dwc3: pci: Supply device properties via driver data
arm64: dts: dwc3: description of incr burst type
usb: dwc3: Enable undefined length INCR burst type
usb: dwc3: add global soc bus configuration reg0
usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
...
Felipe writes:
usb: changes for v4.19
Not a big pull request with only 37 non-merge commits, most of which
are touching dwc2 (74% of the changes).
The most important changes are dwc2's support for uframe scheduling
and its endian-agnostic readl/writel wrappers.
From dwc3 side we have a special new glue layer for Synopsys HAPS
which will help Synopsys running FPGA validation using our upstream
driver. We also have the beginnings of dual-role support for Intel
Merrifield platform.
Apart from these, just a series of non-critical changes.
The UVC gadget userspace API (V4L2 events and custom ioctls) is defined
in a header internal to the kernel. Move it to a new public header to
make it accessible to userspace.
The UVC_INTF_CONTROL and UVC_INTF_STREAMING macros are not used, so
remove them in the process.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
add USBTMC_IOCTL_CONFIG_TERMCHAR to control TermChar handling
for next read(). Controls field 'TermChar' and Bit 1 of field
'bmTransferAttributes' of REQUEST_DEV_DEP_MSG_IN BULK-OUT header.
Allows enabling/disabling of terminating a read on reception of
term_char individually for each read request.
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add USBTMC_IOCTL_EOM_ENABLE to specify EOM bit for next write()
call. Sets Bit 0 of field 'bmTransferAttributes' of DEV_DEP_MSG_OUT
Bulk-OUT Header.
Allows fine grained control over end of message handling on a
per file descriptor basis.
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add USBTMC488_IOCTL_TRIGGER to send TRIGGER Bulk-OUT header
according to Subclass USB488 Specification
The usbtmc trigger command is equivalent to the IEEE 488 GET (Group
Execute Trigger) action. While the "*TRG" command can be sent as
data to perform the same operation, in some situations an instrument
will be busy and unable to process the data immediately in which
case the USBTMC488_IOCTL_TRIGGER can be used to trigger the
instrument with lower latency.
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ioctls USBTMC_IOCTL_GET_TIMEOUT / USBTMC_IOCTL_SET_TIMEOUT to
get/set I/O timeout for specific file handle.
Different operations on an instrument can take different lengths of
time thus it is important to be able to set the timeout slightly
longer than the expected duration of each operation to optimise the
responsiveness of the application. As the instrument may be shared by
multiple applications the timeout should be settable on a per file
descriptor basis.
Tested-by: Dave Penkler <dpenkler@gmail.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for the Processig Units defined in
the UAC3 spec. The main difference with the previous specs
is the lack of on/off switches in the controls for these
units and the addiction of the new Multi Function Processing
Unit.
The current version of the UAC3 spec doesn't define any
useful controls for the new Multi Function Processing Unit
so no control will get created once this unit is parsed.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull sound fixes from Takashi Iwai:
"Here is a collection of small fixes on top of the previous update.
All small and obvious fixes. Mostly for usual suspects, USB-audio and
HD-audio, but a few trivial error handling fixes for misc drivers as
well"
* tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Always create the interrupt pipe for the mixer
ALSA: usb-audio: Add insertion control for UAC3 BADD
ALSA: usb-audio: Change in connectors control creation interface
ALSA: usb-audio: Add bi-directional terminal types
ALSA: lx6464es: add error handling for pci_ioremap_bar
ALSA: sonicvibes: add error handling for snd_ctl_add
ALSA: usb-audio: Remove explicitly listed Mytek devices
ALSA: usb-audio: Generic DSD detection for XMOS-based implementations
ALSA: usb-audio: Add native DSD support for Mytek DACs
ALSA: hda/realtek - Add shutup hint
ALSA: usb-audio: Disable the quirk for Nura headset
ALSA: hda: add dock and led support for HP ProBook 640 G4
ALSA: hda: add dock and led support for HP EliteBook 830 G5
ALSA: emu10k1: add error handling for snd_ctl_add
ALSA: fm801: add error handling for snd_ctl_add
Pull sound updates from Takashi Iwai:
"We've got many code additions at this cycle as a result of quite a few
new drivers. Below are highlights:
Core stuff:
- Fix the long-standing issue with the device registration order; the
control device is now registered at last
- PCM locking code cleanups for RT kernels
- Fixes for possible races in ALSA timer resolution accesses
- TLV offset definitions in uapi
ASoC:
- Many fixes for the topology stuff, including fixes for v4 ABI
compatibility
- Lots of cleanups / quirks for Intel platforms based on Realtek
CODECs
- Continued componentization works, removing legacy CODEC stuff
- Conversion of OMAP DMA to the new, more standard SDMA-PCM driver
- Fixes and updates to Cirrus Logic SoC drivers
- New Qualcomm DSP support
- New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306
and RT5668 and TI TSCS454
HD-audio:
- Finally better support for some CA0132 boards, allowing Windows
firmware
- HP Spectre x360 support along with a bulk of COEF stuff
- Blacklisting power save default some known boards reported on
Fedora
USB-audio:
- Continued improvements on UAC3 support; now BADD is supported
- Fixes / improvements for Dell WD15 dock
- Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co
Others:
- New Xen sound frontend driver support
- Cache implementation and other improvements for FireWire DICE
- Conversions to octal permissions in allover places"
* tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits)
ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it
ALSA: usb-audio: remove redundant check on err
ASoC: topology: Move skl-tplg-interface.h to uapi
ASoC: topology: Move v4 manifest header data structures to uapi
ASoC: topology: Improve backwards compatibility with v4 topology files
ALSA: pci/hda: Remove unused, broken, header file
ASoC: TSCS454: Add Support
ASoC: Intel: kbl: Move codec sysclk config to codec_init function
ASoC: simple-card: set cpu dai clk in hw_params
ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()
ALSA: oxygen: use match_string() helper
ASoC: dapm: use match_string() helper
ASoC: max98095: use match_string() helper
ASoC: max98088: use match_string() helper
ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks
ASoC: mt6797-mt6351: add hostless phone call path
ASoC: mt6797: add Hostless DAI
ASoC: mt6797: add PCM interface
ASoC: mediatek: export mtk-afe symbols as needed
ASoC: codecs: PCM1789: include gpio/consumer.h
...
This adds support for the MIXER UNIT in UAC3. All the information
is obtained from the (HIGH CAPABILITY) Cluster's header. We don't
read the rest of the logical cluster to obtain the channel config
as that wont make any difference in the current mixer behaviour.
The name of the mixer unit is not yet requested as there is not
support for the UAC3 Class Specific String requests.
Tested in an UAC3 device working as a HEADSET with a basic mixer
unit (same as the one in the BADD spec) with no controls.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
