commit 973377ffe8 upstream
In almost all cases from test_verifier that have been changed in here, we've
had an unreachable path with a load from a register which has an invalid
address on purpose. This was basically to make sure that we never walk this
path and to have the verifier complain if it would otherwise. Change it to
match on the right error for unprivileged given we now test these paths
under speculative execution.
There's one case where we match on exact # of insns_processed. Due to the
extra path, this will of course mismatch on unprivileged. Thus, restrict the
test->insn_processed check to privileged-only.
In one other case, we result in a 'pointer comparison prohibited' error. This
is similarly due to verifying an 'invalid' branch where we end up with a value
pointer on one side of the comparison.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7a5091351 upstream
Update various selftest error messages:
* The 'Rx tried to sub from different maps, paths, or prohibited types'
is reworked into more specific/differentiated error messages for better
guidance.
* The change into 'value -4294967168 makes map_value pointer be out of
bounds' is due to moving the mixed bounds check into the speculation
handling and thus occuring slightly later than above mentioned sanity
check.
* The change into 'math between map_value pointer and register with
unbounded min value' is similarly due to register sanity check coming
before the mixed bounds check.
* The case of 'map access: known scalar += value_ptr from different maps'
now loads fine given masks are the same from the different paths (despite
max map value size being different).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bad6fd52b upstream
Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When backporting 0db282ba2c ("selftest: use mmap instead of
posix_memalign to allocate memory") to this stable branch, I forgot a {
breaking the build.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e02bf5de4 ]
After redirecting, it's already a new path. So the old PMTU info should
be cleared. The IPv6 test "mtu exception plus redirect" should only
has redirect info without old PMTU.
The IPv4 test can not be changed because of legacy.
Fixes: ec81053528 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24b671aad4 ]
If the kernel doesn't enable option CONFIG_IPV6_SUBTREES, the RTA_SRC
info will not be exported to userspace in rt6_fill_node(). And ip cmd will
not print "from ::" to the route output. So remove this check.
Fixes: ec81053528 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45677c9aeb ]
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3e5a0579 ]
This test will require /dev/rtc0, the default RTC device, or one
specified by user to run. Since this default RTC is not guaranteed to
exist on all of the devices, so check its existence first, otherwise
skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie
$ /dev/rtc0: No such file or directory
not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie
$ Default RTC /dev/rtc0 does not exist. Test Skipped!
not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1421ec684a upstream.
Resctrl test suite accepts command line argument "-t" to specify the
unit tests to run in the test list (e.g., -t mbm,mba,cmt,cat) as
documented in the help.
When calling strtok() to parse the option, the incorrect delimiters
argument ":\t" is used. As a result, passing "-t mbm,mba,cmt,cat" throws
an invalid option error.
Fix this by using delimiters argument "," instead of ":\t" for parsing
of unit tests list. At the same time, remove the unnecessary "spaces"
between the unit tests in help documentation to prevent confusion.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: 78941183d1 ("selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest")
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Fixes: 034c7678dd ("selftests/resctrl: Add README for resctrl tests")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e67dfb8d15 ]
Several tests do not set some ports down as part of their cleanup(),
resulting in IPv6 link-local addresses and associated routes not being
deleted.
These leaks were found using a BPF tool that monitors ASIC resources.
Solve this by setting the ports down at the end of the tests.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6039ca2549 ]
The pkey test code keeps a "shadow" of the pkey register around. This
ensures that any bugs which might write to the register can be caught more
quickly.
Generally, userspace has a good idea when the kernel is going to write to
the register. For instance, alloc_pkey() is passed a permission mask.
The caller of alloc_pkey() can update the shadow based on the return value
and the mask.
But, the kernel can also modify the pkey register in a more sneaky way.
For mprotect(PROT_EXEC) mappings, the kernel will allocate a pkey and
write the pkey register to create an execute-only mapping. The kernel
never tells userspace what key it uses for this.
This can cause the test to fail with messages like:
protection_keys_64.2: pkey-helpers.h:132: _read_pkey_reg: Assertion `pkey_reg == shadow_pkey_reg' failed.
because the shadow was not updated with the new kernel-set value.
Forcibly update the shadow value immediately after an mprotect().
Link: https://lkml.kernel.org/r/20210611164200.EF76AB73@viggo.jf.intel.com
Fixes: 6af17cf89e ("x86/pkeys/selftests: Add PROT_EXEC test")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f36ef40762 ]
Patch series "selftests/vm/pkeys: Bug fixes and a new test".
There has been a lot of activity on the x86 front around the XSAVE
architecture which is used to context-switch processor state (among other
things). In addition, AMD has recently joined the protection keys club by
adding processor support for PKU.
The AMD implementation helped uncover a kernel bug around the PKRU "init
state", which actually applied to Intel's implementation but was just
harder to hit. This series adds a test which is expected to help find
this class of bug both on AMD and Intel. All the work around pkeys on x86
also uncovered a few bugs in the selftest.
This patch (of 4):
The "random" pkey allocation code currently does the good old:
srand((unsigned int)time(NULL));
*But*, it unfortunately does this on every random pkey allocation.
There may be thousands of these a second. time() has a one second
resolution. So, each time alloc_random_pkey() is called, the PRNG is
*RESET* to time(). This is nasty. Normally, if you do:
srand(<ANYTHING>);
foo = rand();
bar = rand();
You'll be quite guaranteed that 'foo' and 'bar' are different. But, if
you do:
srand(1);
foo = rand();
srand(1);
bar = rand();
You are quite guaranteed that 'foo' and 'bar' are the *SAME*. The recent
"fix" effectively forced the test case to use the same "random" pkey for
the whole test, unless the test run crossed a second boundary.
Only run srand() once at program startup.
This explains some very odd and persistent test failures I've been seeing.
Link: https://lkml.kernel.org/r/20210611164153.91B76FB8@viggo.jf.intel.com
Link: https://lkml.kernel.org/r/20210611164155.192D00FF@viggo.jf.intel.com
Fixes: 6e373263ce ("selftests/vm/pkeys: fix alloc_random_pkey() to make it really random")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07b60713b5 ]
When running event-no-pid test on small machines (e.g. cloud 1-core
instance), other events might not happen:
+ cat trace
+ cnt=0
+ [ 0 -eq 0 ]
+ fail No other events were recorded
[15] event tracing - restricts events based on pid notrace filtering [FAIL]
Schedule a simple sleep task to be sure that some other process events
get recorded.
Fixes: ebed9628f5 ("selftests/ftrace: Add test to test new set_event_notrace_pid file")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b87b04f501 ]
Oliver reported a use case where deleting a VRF device can hang
waiting for the refcnt to drop to 0. The root cause is that the dst
is allocated against the VRF device but cached on the loopback
device.
The use case (added to the selftests) has an implicit VRF crossing
due to the ordering of the FIB rules (lookup local is before the
l3mdev rule, but the problem occurs even if the FIB rules are
re-ordered with local after l3mdev because the VRF table does not
have a default route to terminate the lookup). The end result is
is that the FIB lookup returns the loopback device as the nexthop,
but the ingress device is in a VRF. The mismatch causes the dst
alloc against the VRF device but then cached on the loopback.
The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu):
pick the dst alloc device based the fib lookup result but with checks
that the result has a nexthop device (e.g., not an unreachable or
prohibit entry).
Fixes: f5a0aab84b ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Reported-by: Oliver Herms <oliver.peter.herms@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b68c1c65de ]
Currently the gpio selftests fail to build if the source tree is read
only:
make -j 160 -C tools/testing/selftests TARGETS=gpio
make[1]: Entering directory '/linux/tools/testing/selftests/gpio'
make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio
make[2]: Entering directory '/linux/tools/gpio'
mkdir -p /linux/tools/gpio/include/linux 2>&1 || true
ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h
ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system
This happens because we ask make to build ../../../gpio (tools/gpio)
without pointing OUTPUT away from the source directory.
To fix it we create a subdirectory of the existing OUTPUT directory,
called tools-gpio, and tell tools/gpio to build in there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 449539da2e ]
Move the include of lib.mk up so that in a subsequent patch we can use
OUTPUT, which is initialised by lib.mk, in the definition of the GPIO
variables.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff2c395b92 ]
Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED.
That tells the lib.mk logic that the files it references are to be
generated by the Makefile.
Having done that we don't need to override the all rule.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d1cd3b2c5 ]
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f019 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c25ce589dc upstream.
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1233898ab7 ]
The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.
However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.
To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dda7f4fa55 ]
The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.
In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e6dd1072 ]
selftests/bpf/Makefile includes lib.mk. With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a72c94ebf ]
The rfi_flush and entry_flush selftests work by using the PM_LD_MISS_L1
perf event to count L1D misses. The value of this event has changed
over time:
- Power7 uses 0x400f0
- Power8 and Power9 use both 0x400f0 and 0x3e054
- Power10 uses only 0x3e054
Rather than relying on raw values, configure perf to count L1D read
misses in the most explicit way available.
This fixes the selftests to work on systems without 0x400f0 as
PM_LD_MISS_L1, and should change no behaviour for systems that the tests
already worked on.
The only potential downside is that referring to a specific perf event
requires PMU support implemented in the kernel for that platform.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210223070227.2916871-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10bf4e8316 ]
Similarly as b02709587e ("bpf: Fix propagation of 32-bit signed bounds
from 64-bit bounds."), we also need to fix the propagation of 32 bit
unsigned bounds from 64 bit counterparts. That is, really only set the
u32_{min,max}_value when /both/ {umin,umax}_value safely fit in 32 bit
space. For example, the register with a umin_value == 1 does /not/ imply
that u32_min_value is also equal to 1, since umax_value could be much
larger than 32 bit subregister can hold, and thus u32_min_value is in
the interval [0,1] instead.
Before fix, invalid tracking result of R2_w=inv1:
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smin_value=-9223372036854775807,smax_value=9223372032559808513,umin_value=1,umax_value=18446744069414584321,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv1 R10=fp0
[...]
After fix, correct tracking result of R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)):
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smax_value=9223372032559808513,umax_value=18446744069414584321,var_off=(0x0; 0xffffffff00000001),s32_min_value=0,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) R10=fp0
[...]
Thus, same issue as in b02709587e holds for unsigned subregister tracking.
Also, align __reg64_bound_u32() similarly to __reg64_bound_s32() as done in
b02709587e to make them uniform again.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Manfred Paul (@_manfp)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bede0ebf0b ]
Fix failed tests checks in core_reloc test runner, which allowed failing tests
to pass quietly. Also add extra check to make sure that expected to fail test cases with
invalid names are caught as test failure anyway, as this is not an expected
failure mode. Also fix mislabeled probed vs direct bitfield test cases.
Fixes: 124a892d1c ("selftests/bpf: Test TYPE_EXISTS and TYPE_SIZE CO-RE relocations")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-6-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a30eb2392 ]
Negative field existence cases for have a broken assumption that FIELD_EXISTS
CO-RE relo will fail for fields that match the name but have incompatible type
signature. That's not how CO-RE relocations generally behave. Types and fields
that match by name but not by expected type are treated as non-matching
candidates and are skipped. Error later is reported if no matching candidate
was found. That's what happens for most relocations, but existence relocations
(FIELD_EXISTS and TYPE_EXISTS) are more permissive and they are designed to
return 0 or 1, depending if a match is found. This allows to handle
name-conflicting but incompatible types in BPF code easily. Combined with
___flavor suffixes, it's possible to handle pretty much any structural type
changes in kernel within the compiled once BPF source code.
So, long story short, negative field existence test cases are invalid in their
assumptions, so this patch reworks them into a single consolidated positive
case that doesn't match any of the fields.
Fixes: c7566a6969 ("selftests/bpf: Add field existence CO-RE relocs tests")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-5-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f1c92139e ]
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: abfce9e062 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8d0260cdd ]
The FDB roaming test installs a destination MAC address on the wrong
interface of an FDB database and tests whether the mirroring fails, because
packets are sent to the wrong port. The test by mistake installs the FDB
entry as local. This worked previously, because drivers were notified of
local FDB entries in the same way as of static entries. However that has
been fixed in the commit 6ab4c3117a ("net: bridge: don't notify switchdev
for local FDB addresses"), and local entries are not notified anymore. As a
result, the HW is not reconfigured for the FDB roam, and mirroring keeps
working, failing the test.
To fix the issue, mark the FDB entry as static.
Fixes: 9c7c8a8244 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb4969e6f9 ]
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes: 1a940687e4 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1205b688c9 ]
Dan reported following static checker warnings
tools/testing/selftests/resctrl/resctrl_val.c:545 measure_vals()
warn: 'bw_imc' unsigned <= 0
tools/testing/selftests/resctrl/resctrl_val.c:549 measure_vals()
warn: 'bw_resc_end' unsigned <= 0
These warnings are reported because
1. measure_vals() declares 'bw_imc' and 'bw_resc_end' as unsigned long
variables
2. Return value of get_mem_bw_imc() and get_mem_bw_resctrl() are assigned
to 'bw_imc' and 'bw_resc_end' respectively
3. The returned values are checked for <= 0 to see if the calls failed
Checking for < 0 for an unsigned value doesn't make any sense.
Fix this issue by changing the implementation of get_mem_bw_imc() and
get_mem_bw_resctrl() such that they now accept reference to a variable
and set the variable appropriately upon success and return 0, else return
< 0 on error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d81343b5ee ]
iMC (Integrated Memory Controller) counters are usually at
"/sys/bus/event_source/devices/" and are named as "uncore_imc_<n>".
num_of_imcs() function tries to count number of such iMC counters so that
it could appropriately initialize required number of perf_attr structures
that could be used to read these iMC counters.
num_of_imcs() function assumes that all the directories under this path
that start with "uncore_imc" are iMC counters. But, on some systems there
could be directories named as "uncore_imc_free_running" which aren't iMC
counters. Trying to read from such directories will result in "not found
file" errors and MBM/MBA tests will fail.
Hence, fix the logic in num_of_imcs() such that it looks at the first
character after "uncore_imc_" to check if it's a numerical digit or not. If
it's a digit then the directory represents an iMC counter, else, skip the
directory.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0415681e ]
Resctrl test suite before running any unit test (like cmt, cat, mbm and
mba) should first check if the feature is enabled (by kernel and not just
supported by H/W) on the platform or not.
validate_resctrl_feature_request() is supposed to do that. This function
intends to grep for relevant flags in /proc/cpuinfo but there are several
issues here
1. validate_resctrl_feature_request() calls fgrep() to get flags from
/proc/cpuinfo. But, fgrep() can only return a string with maximum of 255
characters and hence the complete cpu flags are never returned.
2. The substring search logic is also busted. If strstr() finds requested
resctrl feature in the cpu flags, it returns pointer to the first
occurrence. But, the logic negates the return value of strstr() and
hence validate_resctrl_feature_request() returns false if the feature is
present in the cpu flags and returns true if the feature is not present.
3. validate_resctrl_feature_request() checks if a resctrl feature is
reported in /proc/cpuinfo flags or not. Having a cpu flag means that the
H/W supports the feature, but it doesn't mean that the kernel enabled
it. A user could selectively enable only a subset of resctrl features
using kernel command line arguments. Hence, /proc/cpuinfo isn't a
reliable source to check if a feature is enabled or not.
The 3rd issue being the major one and fixing it requires changing the way
validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the
right place to check if a resctrl feature is enabled or not, a more
appropriate place is /sys/fs/resctrl/info directory. Change
validate_resctrl_feature_request() such that,
1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not
2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not
3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy
4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has
mbm_<total/local>_bytes
Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2
variants can be added later.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7af3d0d51 ]
resctrl test suite accepts command line arguments (like -b, -t, -n and -p)
as documented in the help. But passing -n and -p throws an invalid option
error. This happens because -n and -p are missing in the list of
characters that getopt() recognizes as valid arguments. Hence, they are
treated as invalid options.
Fix this by adding them to the list of characters that getopt() recognizes
as valid arguments. Please note that the main() function already has the
logic to deal with the values passed as part of these arguments and hence
no changes are needed there.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
