Changes in 5.10.20
vmlinux.lds.h: add DWARF v5 sections
vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()
debugfs: be more robust at handling improper input in debugfs_lookup()
debugfs: do not attempt to create a new file before the filesystem is initalized
scsi: libsas: docs: Remove notify_ha_event()
scsi: qla2xxx: Fix mailbox Ch erroneous error
kdb: Make memory allocations more robust
w1: w1_therm: Fix conversion result for negative temperatures
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
PCI: Decline to resize resources if boot config must be preserved
virt: vbox: Do not use wait_event_interruptible when called from kernel context
bfq: Avoid false bfq queue merging
ALSA: usb-audio: Fix PCM buffer allocation in non-vmalloc mode
MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() section
vmlinux.lds.h: Define SANTIZER_DISCARDS with CONFIG_GCOV_KERNEL=y
random: fix the RNDRESEEDCRNG ioctl
ALSA: pcm: Call sync_stop at disconnection
ALSA: pcm: Assure sync with the pending stop operation at suspend
ALSA: pcm: Don't call sync_stop if it hasn't been stopped
drm/i915/gt: One more flush for Baytrail clear residuals
ath10k: Fix error handling in case of CE pipe init failure
Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function
Bluetooth: hci_uart: Fix a race for write_work scheduling
Bluetooth: Fix initializing response id after clearing struct
arm64: dts: renesas: beacon kit: Fix choppy Bluetooth Audio
arm64: dts: renesas: beacon: Fix audio-1.8V pin enable
ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5
ARM: dts: exynos: correct PMIC interrupt trigger level on Monk
ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato
ARM: dts: exynos: correct PMIC interrupt trigger level on Spring
ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family
arm64: dts: exynos: correct PMIC interrupt trigger level on TM2
arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso
memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops
Bluetooth: hci_qca: Fix memleak in qca_controller_memdump
staging: vchiq: Fix bulk userdata handling
staging: vchiq: Fix bulk transfers on 64-bit builds
arm64: dts: qcom: msm8916-samsung-a5u: Fix iris compatible
net: stmmac: dwmac-meson8b: fix enabling the timing-adjustment clock
bpf: Add bpf_patch_call_args prototype to include/linux/bpf.h
bpf: Avoid warning when re-casting __bpf_call_base into __bpf_call_base_args
firmware: arm_scmi: Fix call site of scmi_notification_exit
arm64: dts: allwinner: A64: properly connect USB PHY to port 0
arm64: dts: allwinner: H6: properly connect USB PHY to port 0
arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card
arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency
arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz
arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node
ACPICA: Fix exception code class checks
usb: gadget: u_audio: Free requests only after callback
arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node
soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
soc: ti: pm33xx: Fix some resource leak in the error handling paths of the probe function
staging: media: atomisp: Fix size_t format specifier in hmm_alloc() debug statemenet
Bluetooth: drop HCI device reference before return
Bluetooth: Put HCI device if inquiry procedure interrupts
memory: ti-aemif: Drop child node when jumping out loop
ARM: dts: Configure missing thermal interrupt for 4430
usb: dwc2: Do not update data length if it is 0 on inbound transfers
usb: dwc2: Abort transaction after errors with unknown reason
usb: dwc2: Make "trimming xfer length" a debug message
staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules
x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
arm64: dts: renesas: beacon: Fix EEPROM compatible value
can: mcp251xfd: mcp251xfd_probe(): fix errata reference
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada388-helios4: assign pinctrl to each fan
arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware
opp: Correct debug message in _opp_add_static_v2()
Bluetooth: btusb: Fix memory leak in btusb_mtk_wmt_recv
soc: qcom: ocmem: don't return NULL in of_get_ocmem
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
iwlwifi: mvm: set enabled in the PPAG command properly
ARM: s3c: fix fiq for clang IAS
optee: simplify i2c access
staging: wfx: fix possible panic with re-queued frames
ARM: at91: use proper asm syntax in pm_suspend
ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info()
ath10k: Fix lockdep assertion warning in ath10k_sta_statistics
ath11k: fix a locking bug in ath11k_mac_op_start()
soc: aspeed: snoop: Add clock control logic
iwlwifi: mvm: fix the type we use in the PPAG table validity checks
iwlwifi: mvm: store PPAG enabled/disabled flag properly
iwlwifi: mvm: send stored PPAG command instead of local
iwlwifi: mvm: assign SAR table revision to the command later
iwlwifi: mvm: don't check if CSA event is running before removing
bpf_lru_list: Read double-checked variable once without lock
iwlwifi: pnvm: set the PNVM again if it was already loaded
iwlwifi: pnvm: increment the pointer before checking the TLV
ath9k: fix data bus crash when setting nf_override via debugfs
selftests/bpf: Convert test_xdp_redirect.sh to bash
ibmvnic: Set to CLOSED state even on error
bnxt_en: reverse order of TX disable and carrier off
bnxt_en: Fix devlink info's stored fw.psid version format.
xen/netback: fix spurious event detection for common event case
dpaa2-eth: fix memory leak in XDP_REDIRECT
net: phy: consider that suspend2ram may cut off PHY power
net/mlx5e: Don't change interrupt moderation params when DIM is enabled
net/mlx5e: Change interrupt moderation channel params also when channels are closed
net/mlx5: Fix health error state handling
net/mlx5e: Replace synchronize_rcu with synchronize_net
net/mlx5e: kTLS, Use refcounts to free kTLS RX priv context
net/mlx5: Disable devlink reload for multi port slave device
net/mlx5: Disallow RoCE on multi port slave device
net/mlx5: Disallow RoCE on lag device
net/mlx5: Disable devlink reload for lag devices
net/mlx5e: CT: manage the lifetime of the ct entry object
net/mlx5e: Check tunnel offload is required before setting SWP
mac80211: fix potential overflow when multiplying to u32 integers
libbpf: Ignore non function pointer member in struct_ops
bpf: Fix an unitialized value in bpf_iter
bpf, devmap: Use GFP_KERNEL for xdp bulk queue allocation
bpf: Fix bpf_fib_lookup helper MTU check for SKB ctx
selftests: mptcp: fix ACKRX debug message
tcp: fix SO_RCVLOWAT related hangs under mem pressure
net: axienet: Handle deferred probe on clock properly
cxgb4/chtls/cxgbit: Keeping the max ofld immediate data size same in cxgb4 and ulds
b43: N-PHY: Fix the update of coef for the PHY revision >= 3case
bpf: Clear subreg_def for global function return values
ibmvnic: add memory barrier to protect long term buffer
ibmvnic: skip send_request_unmap for timeout reset
net: dsa: felix: perform teardown in reverse order of setup
net: dsa: felix: don't deinitialize unused ports
net: phy: mscc: adding LCPLL reset to VSC8514
net: amd-xgbe: Reset the PHY rx data path when mailbox command timeout
net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warning
net: amd-xgbe: Reset link when the link never comes back
net: amd-xgbe: Fix network fluctuations when using 1G BELFUSE SFP
net: mvneta: Remove per-cpu queue mapping for Armada 3700
net: enetc: fix destroyed phylink dereference during unbind
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
tty: implement read_iter
fbdev: aty: SPARC64 requires FB_ATY_CT
drm/gma500: Fix error return code in psb_driver_load()
gma500: clean up error handling in init
drm/fb-helper: Add missed unlocks in setcmap_legacy()
drm/panel: mantix: Tweak init sequence
drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check
crypto: sun4i-ss - linearize buffers content must be kept
crypto: sun4i-ss - fix kmap usage
crypto: arm64/aes-ce - really hide slower algos when faster ones are enabled
hwrng: ingenic - Fix a resource leak in an error handling path
media: allegro: Fix use after free on error
kcsan: Rewrite kcsan_prandom_u32_max() without prandom_u32_state()
drm: rcar-du: Fix PM reference leak in rcar_cmm_enable()
drm: rcar-du: Fix crash when using LVDS1 clock for CRTC
drm: rcar-du: Fix the return check of of_parse_phandle and of_find_device_by_node
drm/amdgpu: Fix macro name _AMDGPU_TRACE_H_ in preprocessor if condition
MIPS: c-r4k: Fix section mismatch for loongson2_sc_init
MIPS: lantiq: Explicitly compare LTQ_EBU_PCC_ISTAT against 0
drm/virtio: make sure context is created in gem open
drm/fourcc: fix Amlogic format modifier masks
media: ipu3-cio2: Build only for x86
media: i2c: ov5670: Fix PIXEL_RATE minimum value
media: imx: Unregister csc/scaler only if registered
media: imx: Fix csc/scaler unregister
media: mtk-vcodec: fix error return code in vdec_vp9_decode()
media: camss: missing error code in msm_video_register()
media: vsp1: Fix an error handling path in the probe function
media: em28xx: Fix use-after-free in em28xx_alloc_urbs
media: media/pci: Fix memleak in empress_init
media: tm6000: Fix memleak in tm6000_start_stream
media: aspeed: fix error return code in aspeed_video_setup_video()
ASoC: cs42l56: fix up error handling in probe
ASoC: qcom: qdsp6: Move frontend AIFs to q6asm-dai
evm: Fix memleak in init_desc
crypto: bcm - Rename struct device_private to bcm_device_private
sched/fair: Avoid stale CPU util_est value for schedutil in task dequeue
drm/sun4i: tcon: fix inverted DCLK polarity
media: imx7: csi: Fix regression for parallel cameras on i.MX6UL
media: imx7: csi: Fix pad link validation
media: ti-vpe: cal: fix write to unallocated memory
MIPS: properly stop .eh_frame generation
MIPS: Compare __SYNC_loongson3_war against 0
drm/tegra: Fix reference leak when pm_runtime_get_sync() fails
drm/amdgpu: toggle on DF Cstate after finishing xgmi injection
bsg: free the request before return error code
macintosh/adb-iop: Use big-endian autopoll mask
drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.
drm/amd/display: Fix HDMI deep color output for DCE 6-11.
media: software_node: Fix refcounts in software_node_get_next_child()
media: lmedm04: Fix misuse of comma
media: vidtv: psi: fix missing crc for PMT
media: atomisp: Fix a buffer overflow in debug code
media: qm1d1c0042: fix error return code in qm1d1c0042_init()
media: cx25821: Fix a bug when reallocating some dma memory
media: mtk-vcodec: fix argument used when DEBUG is defined
media: pxa_camera: declare variable when DEBUG is defined
media: uvcvideo: Accept invalid bFormatIndex and bFrameIndex values
sched/eas: Don't update misfit status if the task is pinned
f2fs: compress: fix potential deadlock
ASoC: qcom: lpass-cpu: Remove bit clock state check
ASoC: SOF: Intel: hda: cancel D0i3 work during runtime suspend
perf/arm-cmn: Fix PMU instance naming
perf/arm-cmn: Move IRQs when migrating context
mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions()
crypto: talitos - Work around SEC6 ERRATA (AES-CTR mode data size error)
crypto: talitos - Fix ctr(aes) on SEC1
drm/nouveau: bail out of nouveau_channel_new if channel init fails
mm: proc: Invalidate TLB after clearing soft-dirty page state
ata: ahci_brcm: Add back regulators management
ASoC: cpcap: fix microphone timeslot mask
ASoC: codecs: add missing max_register in regmap config
mtd: parsers: afs: Fix freeing the part name memory in failure
f2fs: fix to avoid inconsistent quota data
drm/amdgpu: Prevent shift wrapping in amdgpu_read_mask()
f2fs: fix a wrong condition in __submit_bio
ASoC: qcom: Fix typo error in HDMI regmap config callbacks
KVM: nSVM: Don't strip host's C-bit from guest's CR3 when reading PDPTRs
drm/mediatek: Check if fb is null
Drivers: hv: vmbus: Avoid use-after-free in vmbus_onoffer_rescind()
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A5E
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A3E
locking/lockdep: Avoid unmatched unlock
ASoC: qcom: lpass: Fix i2s ctl register bit map
ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown
ASoC: SOF: debug: Fix a potential issue on string buffer termination
btrfs: clarify error returns values in __load_free_space_cache
btrfs: fix double accounting of ordered extent for subpage case in btrfs_invalidapge
KVM: x86: Restore all 64 bits of DR6 and DR7 during RSM on x86-64
s390/zcrypt: return EIO when msg retry limit reached
drm/vc4: hdmi: Move hdmi reset to bind
drm/vc4: hdmi: Fix register offset with longer CEC messages
drm/vc4: hdmi: Fix up CEC registers
drm/vc4: hdmi: Restore cec physical address on reconnect
drm/vc4: hdmi: Compute the CEC clock divider from the clock rate
drm/vc4: hdmi: Update the CEC clock divider on HSM rate change
drm/lima: fix reference leak in lima_pm_busy
drm/dp_mst: Don't cache EDIDs for physical ports
hwrng: timeriomem - Fix cooldown period calculation
crypto: ecdh_helper - Ensure 'len >= secret.len' in decode_key()
io_uring: fix possible deadlock in io_uring_poll
nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUs
nvmet-tcp: fix potential race of tcp socket closing accept_work
nvme-multipath: set nr_zones for zoned namespaces
nvmet: remove extra variable in identify ns
nvmet: set status to 0 in case for invalid nsid
ASoC: SOF: sof-pci-dev: add missing Up-Extreme quirk
ima: Free IMA measurement buffer on error
ima: Free IMA measurement buffer after kexec syscall
ASoC: simple-card-utils: Fix device module clock
fs/jfs: fix potential integer overflow on shift of a int
jffs2: fix use after free in jffs2_sum_write_data()
ubifs: Fix memleak in ubifs_init_authentication
ubifs: replay: Fix high stack usage, again
ubifs: Fix error return code in alloc_wbufs()
irqchip/imx: IMX_INTMUX should not default to y, unconditionally
smp: Process pending softirqs in flush_smp_call_function_from_idle()
drm/amdgpu/display: remove hdcp_srm sysfs on device removal
capabilities: Don't allow writing ambiguous v3 file capabilities
HSI: Fix PM usage counter unbalance in ssi_hw_init
power: supply: cpcap: Add missing IRQF_ONESHOT to fix regression
clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL
clk: meson: clk-pll: make "ret" a signed integer
clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
selftests/powerpc: Make the test check in eeh-basic.sh posix compliant
regulator: qcom-rpmh-regulator: add pm8009-1 chip revision
arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators
quota: Fix memory leak when handling corrupted quota file
i2c: iproc: handle only slave interrupts which are enabled
i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)
i2c: iproc: handle master read request
spi: cadence-quadspi: Abort read if dummy cycles required are too many
clk: sunxi-ng: h6: Fix CEC clock
clk: renesas: r8a779a0: Remove non-existent S2 clock
clk: renesas: r8a779a0: Fix parent of CBFUSA clock
HID: core: detect and skip invalid inputs to snto32()
RDMA/siw: Fix handling of zero-sized Read and Receive Queues.
dmaengine: fsldma: Fix a resource leak in the remove function
dmaengine: fsldma: Fix a resource leak in an error handling path of the probe function
dmaengine: owl-dma: Fix a resource leak in the remove function
dmaengine: hsu: disable spurious interrupt
mfd: bd9571mwv: Use devm_mfd_add_devices()
power: supply: cpcap-charger: Fix missing power_supply_put()
power: supply: cpcap-battery: Fix missing power_supply_put()
power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
fdt: Properly handle "no-map" field in the memory region
of/fdt: Make sure no-map does not remove already reserved regions
RDMA/rtrs: Extend ibtrs_cq_qp_create
RDMA/rtrs-srv: Release lock before call into close_sess
RDMA/rtrs-srv: Use sysfs_remove_file_self for disconnect
RDMA/rtrs-clt: Set mininum limit when create QP
RDMA/rtrs: Call kobject_put in the failure path
RDMA/rtrs-srv: Fix missing wr_cqe
RDMA/rtrs-clt: Refactor the failure cases in alloc_clt
RDMA/rtrs-srv: Init wr_cnt as 1
power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
rtc: s5m: select REGMAP_I2C
dmaengine: idxd: set DMA channel to be private
power: supply: fix sbs-charger build, needs REGMAP_I2C
clocksource/drivers/ixp4xx: Select TIMER_OF when needed
clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
spi: imx: Don't print error on -EPROBEDEFER
RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation
IB/mlx5: Add mutex destroy call to cap_mask_mutex mutex
clk: sunxi-ng: h6: Fix clock divider range on some clocks
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
regulator: axp20x: Fix reference cout leak
watch_queue: Drop references to /dev/watch_queue
certs: Fix blacklist flag type confusion
regulator: s5m8767: Fix reference count leak
spi: atmel: Put allocated master before return
regulator: s5m8767: Drop regulators OF node reference
power: supply: axp20x_usb_power: Init work before enabling IRQs
power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
regulator: core: Avoid debugfs: Directory ... already present! error
isofs: release buffer head before return
watchdog: intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
auxdisplay: ht16k33: Fix refresh rate handling
objtool: Fix error handling for STD/CLD warnings
objtool: Fix retpoline detection in asm code
objtool: Fix ".cold" section suffix check for newer versions of GCC
scsi: lpfc: Fix ancient double free
iommu: Switch gather->end to the inclusive end
IB/umad: Return EIO in case of when device disassociated
IB/umad: Return EPOLLERR in case of when device disassociated
KVM: PPC: Make the VMX instruction emulation routines static
powerpc/47x: Disable 256k page size
powerpc/time: Enable sched clock for irqtime
mmc: owl-mmc: Fix a resource leak in an error handling path and in the remove function
mmc: sdhci-sprd: Fix some resource leaks in the remove function
mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe
mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytes
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev struct
amba: Fix resource leak for drivers without .remove
iommu: Move iotlb_sync_map out from __iommu_map
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
IB/mlx5: Return appropriate error code instead of ENOMEM
IB/cm: Avoid a loop when device has 255 ports
tracepoint: Do not fail unregistering a probe due to memory failure
rtc: zynqmp: depend on HAS_IOMEM
perf tools: Fix DSO filtering when not finding a map for a sampled address
perf vendor events arm64: Fix Ampere eMag event typo
RDMA/rxe: Fix coding error in rxe_recv.c
RDMA/rxe: Fix coding error in rxe_rcv_mcast_pkt
RDMA/rxe: Correct skb on loopback path
spi: stm32: properly handle 0 byte transfer
mfd: altera-sysmgr: Fix physical address storing more
mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
powerpc/pseries/dlpar: handle ibm, configure-connector delay status
powerpc/8xx: Fix software emulation interrupt
clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
kunit: tool: fix unit test cleanup handling
kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir
RDMA/hns: Fixed wrong judgments in the goto branch
RDMA/siw: Fix calculation of tx_valid_cpus size
RDMA/hns: Fix type of sq_signal_bits
RDMA/hns: Disable RQ inline by default
clk: divider: fix initialization with parent_hw
spi: pxa2xx: Fix the controller numbering for Wildcat Point
powerpc/uaccess: Avoid might_fault() when user access is enabled
powerpc/kuap: Restore AMR after replaying soft interrupts
regulator: qcom-rpmh: fix pm8009 ldo7
clk: aspeed: Fix APLL calculate formula from ast2600-A2
selftests/ftrace: Update synthetic event syntax errors
perf symbols: Use (long) for iterator for bfd symbols
regulator: bd718x7, bd71828, Fix dvs voltage levels
spi: dw: Avoid stack content exposure
spi: Skip zero-length transfers in spi_transfer_one_message()
printk: avoid prb_first_valid_seq() where possible
perf symbols: Fix return value when loading PE DSO
nfsd: register pernet ops last, unregister first
svcrdma: Hold private mutex while invoking rdma_accept()
ceph: fix flush_snap logic after putting caps
RDMA/hns: Fixes missing error code of CMDQ
RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
RDMA/rtrs-srv: Fix stack-out-of-bounds
RDMA/rtrs: Only allow addition of path to an already established session
RDMA/rtrs-srv: fix memory leak by missing kobject free
RDMA/rtrs-srv-sysfs: fix missing put_device
RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
Input: sur40 - fix an error code in sur40_probe()
perf record: Fix continue profiling after draining the buffer
perf intel-pt: Fix missing CYC processing in PSB
perf intel-pt: Fix premature IPC
perf intel-pt: Fix IPC with CYC threshold
perf test: Fix unaligned access in sample parsing test
Input: elo - fix an error code in elo_connect()
sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is set
sparc: fix led.c driver when PROC_FS is not enabled
Input: zinitix - fix return type of zinitix_init_touch()
ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
misc: eeprom_93xx46: Fix module alias to enable module autoprobe
phy: rockchip-emmc: emmc_phy_init() always return 0
phy: cadence-torrent: Fix error code in cdns_torrent_phy_probe()
misc: eeprom_93xx46: Add module alias to avoid breaking support for non device tree users
PCI: rcar: Always allocate MSI addresses in 32bit space
soundwire: cadence: fix ACK/NAK handling
pwm: rockchip: Enable APB clock during register access while probing
pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()
pwm: rockchip: Eliminate potential race condition when probing
PCI: xilinx-cpm: Fix reference count leak on error path
VMCI: Use set_page_dirty_lock() when unregistering guest memory
PCI: Align checking of syscall user config accessors
mei: hbm: call mei_set_devstate() on hbm stop response
drm/msm: Fix MSM_INFO_GET_IOVA with carveout
drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)
drm/msm/mdp5: Fix wait-for-commit for cmd panels
drm/msm: Fix race of GPU init vs timestamp power management.
drm/msm: Fix races managing the OOB state for timestamp vs timestamps.
drm/msm/dp: trigger unplug event in msm_dp_display_disable
vfio/iommu_type1: Populate full dirty when detach non-pinned group
vfio/iommu_type1: Fix some sanity checks in detach group
vfio-pci/zdev: fix possible segmentation fault issue
ext4: fix potential htree index checksum corruption
phy: USB_LGM_PHY should depend on X86
coresight: etm4x: Skip accessing TRCPDCR in save/restore
nvmem: core: Fix a resource leak on error in nvmem_add_cells_from_of()
nvmem: core: skip child nodes not matching binding
soundwire: bus: use sdw_update_no_pm when initializing a device
soundwire: bus: use sdw_write_no_pm when setting the bus scale registers
soundwire: export sdw_write/read_no_pm functions
soundwire: bus: fix confusion on device used by pm_runtime
misc: fastrpc: fix incorrect usage of dma_map_sgtable
remoteproc/mediatek: acknowledge watchdog IRQ after handled
regmap: sdw: use _no_pm functions in regmap_read/write
ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
mailbox: sprd: correct definition of SPRD_OUTBOX_FIFO_FULL
device-dax: Fix default return code of range_parse()
PCI: pci-bridge-emul: Fix array overruns, improve safety
PCI: cadence: Fix DMA range mapping early return error
i40e: Fix flow for IPv6 next header (extension header)
i40e: Add zero-initialization of AQ command structures
i40e: Fix overwriting flow control settings during driver loading
i40e: Fix addition of RX filters after enabling FW LLDP agent
i40e: Fix VFs not created
Take mmap lock in cacheflush syscall
nios2: fixed broken sys_clone syscall
i40e: Fix add TC filter for IPv6
octeontx2-af: Fix an off by one in rvu_dbg_qsize_write()
pwm: iqs620a: Fix overflow and optimize calculations
vfio/type1: Use follow_pte()
ice: report correct max number of TCs
ice: Account for port VLAN in VF max packet size calculation
ice: Fix state bits on LLDP mode switch
ice: update the number of available RSS queues
net: stmmac: fix CBS idleslope and sendslope calculation
net/mlx4_core: Add missed mlx4_free_cmd_mailbox()
PCI: rockchip: Make 'ep-gpios' DT property optional
vxlan: move debug check after netdev unregister
wireguard: device: do not generate ICMP for non-IP packets
wireguard: kconfig: use arm chacha even with no neon
ocfs2: fix a use after free on error
mm: memcontrol: fix NR_ANON_THPS accounting in charge moving
mm: memcontrol: fix slub memory accounting
mm/memory.c: fix potential pte_unmap_unlock pte error
mm/hugetlb: fix potential double free in hugetlb_register_node() error path
mm/hugetlb: suppress wrong warning info when alloc gigantic page
mm/compaction: fix misbehaviors of fast_find_migrateblock()
r8169: fix jumbo packet handling on RTL8168e
NFSv4: Fixes for nfs4_bitmask_adjust()
KVM: SVM: Intercept INVPCID when it's disabled to inject #UD
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
arm64: Add missing ISB after invalidating TLB in __primary_switch
i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition
i2c: exynos5: Preserve high speed master code
mm,thp,shmem: make khugepaged obey tmpfs mount flags
mm: fix memory_failure() handling of dax-namespace metadata
mm/rmap: fix potential pte_unmap on an not mapped pte
proc: use kvzalloc for our kernel buffer
csky: Fix a size determination in gpr_get()
scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
block: reopen the device in blkdev_reread_part
ide/falconide: Fix module unload
scsi: sd: Fix Opal support
blk-settings: align max_sectors on "logical_block_size" boundary
soundwire: intel: fix possible crash when no device is detected
ACPI: property: Fix fwnode string properties matching
ACPI: configfs: add missing check after configfs_register_default_group()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
Input: raydium_ts_i2c - do not send zero length
Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S
Input: joydev - prevent potential read overflow in ioctl
Input: i8042 - add ASUS Zenbook Flip to noselftest list
media: mceusb: Fix potential out-of-bounds shift
USB: serial: option: update interface mapping for ZTE P685M
usb: musb: Fix runtime PM race in musb_queue_resume_work
usb: dwc3: gadget: Fix setting of DEPCFG.bInterval_m1
usb: dwc3: gadget: Fix dep->interval for fullspeed interrupt
USB: serial: ftdi_sio: fix FTX sub-integer prescaler
USB: serial: pl2303: fix line-speed handling on newer chips
USB: serial: mos7840: fix error code in mos7840_write()
USB: serial: mos7720: fix error code in mos7720_write()
phy: lantiq: rcu-usb2: wait after clock enable
ALSA: fireface: fix to parse sync status register of latter protocol
ALSA: hda: Add another CometLake-H PCI ID
ALSA: hda/hdmi: Drop bogus check at closing a stream
ALSA: hda/realtek: modify EAPD in the ALC886
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
MIPS: Ingenic: Disable HPTLB for D0 XBurst CPUs too
MIPS: Support binutils configured with --enable-mips-fix-loongson3-llsc=yes
MIPS: VDSO: Use CLANG_FLAGS instead of filtering out '--target='
Revert "MIPS: Octeon: Remove special handling of CONFIG_MIPS_ELF_APPENDED_DTB=y"
Revert "bcache: Kill btree_io_wq"
bcache: Give btree_io_wq correct semantics again
bcache: Move journal work to new flush wq
Revert "drm/amd/display: Update NV1x SR latency values"
drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()
drm/amd/display: Remove Assert from dcn10_get_dig_frontend
drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1
drm/amdkfd: Fix recursive lock warnings
drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)
drm/nouveau/kms: handle mDP connectors
drm/modes: Switch to 64bit maths to avoid integer overflow
drm/sched: Cancel and flush all outstanding jobs before finish.
drm/panel: kd35t133: allow using non-continuous dsi clock
drm/rockchip: Require the YTR modifier for AFBC
ASoC: siu: Fix build error by a wrong const prefix
selinux: fix inconsistency between inode_getxattr and inode_listsecurity
erofs: initialized fields can only be observed after bit is set
tpm_tis: Fix check_locality for correct locality acquisition
tpm_tis: Clean up locality release
KEYS: trusted: Fix incorrect handling of tpm_get_random()
KEYS: trusted: Fix migratable=1 failing
KEYS: trusted: Reserve TPM for seal and unseal operations
btrfs: do not cleanup upper nodes in btrfs_backref_cleanup_node
btrfs: do not warn if we can't find the reloc root when looking up backref
btrfs: add asserts for deleting backref cache nodes
btrfs: abort the transaction if we fail to inc ref in btrfs_copy_root
btrfs: fix reloc root leak with 0 ref reloc roots on recovery
btrfs: splice remaining dirty_bg's onto the transaction dirty bg list
btrfs: handle space_info::total_bytes_pinned inside the delayed ref itself
btrfs: account for new extents being deleted in total_bytes_pinned
btrfs: fix extent buffer leak on failure to copy root
drm/i915/gt: Flush before changing register state
drm/i915/gt: Correct surface base address for renderclear
crypto: arm64/sha - add missing module aliases
crypto: aesni - prevent misaligned buffers on the stack
crypto: michael_mic - fix broken misalignment handling
crypto: sun4i-ss - checking sg length is not sufficient
crypto: sun4i-ss - IV register does not work on A10 and A13
crypto: sun4i-ss - handle BigEndian for cipher
crypto: sun4i-ss - initialize need_fallback
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
soc: samsung: exynos-asv: handle reading revision register error
seccomp: Add missing return in non-void function
arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)
misc: rtsx: init of rts522a add OCP power off when no card is present
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
pstore: Fix typo in compression option name
dts64: mt7622: fix slow sd card access
arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
staging/mt7621-dma: mtk-hsdma.c->hsdma-mt7621.c
staging: gdm724x: Fix DMA from stack
staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table
floppy: reintroduce O_NDELAY fix
media: i2c: max9286: fix access to unallocated memory
media: ir_toy: add another IR Droid device
media: ipu3-cio2: Fix mbus_code processing in cio2_subdev_set_fmt()
media: marvell-ccic: power up the device on mclk enable
media: smipcie: fix interrupt handling and IR timeout
x86/virt: Eat faults on VMXOFF in reboot flows
x86/reboot: Force all cpus to exit VMX root if VMX is supported
x86/fault: Fix AMD erratum #91 errata fixup for user code
x86/entry: Fix instrumentation annotation
powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
kprobes: Fix to delay the kprobes jump optimization
arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55
iommu/arm-smmu-qcom: Fix mask extraction for bootloader programmed SMRs
arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails
arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing
arm64 module: set plt* section addresses to 0x0
arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
riscv: Disable KSAN_SANITIZE for vDSO
watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ
watchdog: mei_wdt: request stop on unregister
coresight: etm4x: Handle accesses to TRCSTALLCTLR
mtd: spi-nor: sfdp: Fix last erase region marking
mtd: spi-nor: sfdp: Fix wrong erase type bitmask for overlaid region
mtd: spi-nor: core: Fix erase type discovery for overlaid region
mtd: spi-nor: core: Add erase size check for erase command initialization
mtd: spi-nor: hisi-sfc: Put child node np on error path
fs/affs: release old buffer head on error path
seq_file: document how per-entry resources are managed.
x86: fix seq_file iteration for pat/memtype.c
mm: memcontrol: fix swap undercounting in cgroup2
mm: memcontrol: fix get_active_memcg return value
hugetlb: fix update_and_free_page contig page struct assumption
hugetlb: fix copy_huge_page_from_user contig page struct assumption
mm/vmscan: restore zone_reclaim_mode ABI
mm, compaction: make fast_isolate_freepages() stay within zone
KVM: nSVM: fix running nested guests when npt=0
nvmem: qcom-spmi-sdam: Fix uninitialized pdev pointer
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
mmc: sdhci-esdhc-imx: fix kernel panic when remove module
mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
powerpc/32: Preserve cr1 in exception prolog stack check to fix build error
powerpc/kexec_file: fix FDT size estimation for kdump kernel
powerpc/32s: Add missing call to kuep_lock on syscall entry
spmi: spmi-pmic-arb: Fix hw_irq overflow
mei: fix transfer over dma with extended header
mei: me: emmitsburg workstation DID
mei: me: add adler lake point S DID
mei: me: add adler lake point LP DID
gpio: pcf857x: Fix missing first interrupt
mfd: gateworks-gsc: Fix interrupt type
printk: fix deadlock when kernel panic
exfat: fix shift-out-of-bounds in exfat_fill_super()
zonefs: Fix file size of zones in full condition
kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument
cpufreq: intel_pstate: Get per-CPU max freq via MSR_HWP_CAPABILITIES if available
proc: don't allow async path resolution of /proc/thread-self components
s390/vtime: fix inline assembly clobber list
virtio/s390: implement virtio-ccw revision 2 correctly
um: mm: check more comprehensively for stub changes
um: defer killing userspace on page table update failures
irqchip/loongson-pch-msi: Use bitmap_zalloc() to allocate bitmap
f2fs: fix out-of-repair __setattr_copy()
f2fs: enforce the immutable flag on open files
f2fs: flush data when enabling checkpoint back
sparc32: fix a user-triggerable oops in clear_user()
spi: fsl: invert spisel_boot signal on MPC8309
spi: spi-synquacer: fix set_cs handling
gfs2: fix glock confusion in function signal_our_withdraw
gfs2: Don't skip dlm unlock if glock has an lvb
gfs2: Lock imbalance on error path in gfs2_recover_one
gfs2: Recursive gfs2_quota_hold in gfs2_iomap_end
dm: fix deadlock when swapping to encrypted device
dm table: fix iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix zoned iterate_devices based device capability checks
dm writecache: fix performance degradation in ssd mode
dm writecache: return the exact table values that were set
dm writecache: fix writing beyond end of underlying device when shrinking
dm era: Recover committed writeset after crash
dm era: Update in-core bitset after committing the metadata
dm era: Verify the data block size hasn't changed
dm era: Fix bitset memory leaks
dm era: Use correct value size in equality function of writeset tree
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: only resize metadata in preresume
drm/i915: Reject 446-480MHz HDMI clock on GLK
kgdb: fix to kill breakpoints on initmem after boot
ipv6: silence compilation warning for non-IPV6 builds
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
wireguard: selftests: test multiple parallel streams
wireguard: queueing: get rid of per-peer ring buffers
net: sched: fix police ext initialization
net: qrtr: Fix memory leak in qrtr_tun_open
net_sched: fix RTNL deadlock again caused by request_module()
ARM: dts: aspeed: Add LCLK to lpc-snoop
Linux 5.10.20
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3fbcecd9413ce212dac68d5cc800c9457feba56a
commit a666e5c05e upstream.
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the following patches with upstream versions
(well, almost upstream; as of 2021-02-12 they are queued for 5.12 at
https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git/log/?h=for-next):
ANDROID-dm-add-support-for-passing-through-inline-crypto-support.patch
ANDROID-dm-enable-may_passthrough_inline_crypto-on-some-targets.patch
ANDROID-block-Introduce-passthrough-keyslot-manager.patch
Also, resolve conflicts with the following non-upstream patches for
hardware-wrapped key support. Notably, we need to handle the field
blk_keyslot_manager::features in a few places:
ANDROID-block-add-hardware-wrapped-key-support.patch
ANDROID-dm-add-support-for-passing-through-derive_raw_secret.patch
Finally, update non-upstream device-mapper targets (dm-bow and
dm-default-key) to use the new way of specifying inline crypto
passthrough support (DM_TARGET_PASSES_CRYPTO) rather than the old way
(may_passthrough_inline_crypto). These changes should be folded into:
ANDROID-dm-bow-Add-dm-bow-feature.patch
ANDROID-dm-add-dm-default-key-target-for-metadata-encryption.patch
Test: tested on db845c; verified that inline crypto support gets passed
through over dm-linear.
Bug: 162257830
Change-Id: I5e3dea1aa09fc1215c90857b5b51d9e3720ef7db
Signed-off-by: Eric Biggers <ebiggers@google.com>
Steps on the way to 5.10-rc1
Resolves conflicts in:
include/linux/blk-crypto.h
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4012850c2e4b804d9e87e90b8e03a3b9ce21b5e7
Since commit 5a6c35f9af ("block: remove direct_make_request") there
is no benefit to DM special-casing NVMe. Remove all code used to
establish DM_TYPE_NVME_BIO_BASED.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add DM target feature flag DM_TARGET_NOWAIT which advertises that
target works with REQ_NOWAIT bios.
Add dm_table_supports_nowait() and update dm_table_set_restrictions()
to set/clear QUEUE_FLAG_NOWAIT accordingly.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
Partial 5.8-rc7 merge to make the final merge easier.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I95f1b0a379e3810333300a70c5a93f449d945c54
Commit adc0daad36 ("dm: report suspended
device during destroy") broke integrity recalculation.
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad36 ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures. And
pktdvd is a deprecated driver that isn't useful in stack setup
either. So remove the dead congested_fn stacking infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to use dynamic debug to avoid having recompile the kernel
just to enable debugging messages.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The HST path selector needs this information to perform path
prediction. For request-based mpath, struct request's io_start_time_ns
is used, while for bio-based, use the start_time stored in dm_io.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for the set of (crypto_mode,
data_unit_size) combos which all the underlying devices support. When a
supported combo is used, the bio cloning code handles cloning the crypto
context to the bios for all the underlying devices. When an unsupported
combo is used, the blk-crypto fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
When a key is evicted from the dm device, it is evicted from all
underlying devices.
Bug: 137270441
Bug: 147814592
Change-Id: If28b574f2e28268db5eb9f325d4cf8f96cb63e3f
Signed-off-by: Eric Biggers <ebiggers@google.com>
Pull device mapper updates from Mike Snitzer:
- Fix DM core to disallow stacking request-based DM on partitions.
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space
for each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive
backing device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
dm: Fix Kconfig indentation
dm thin: wakeup worker only when deferred bios exist
dm integrity: fix excessive alignment of metadata runs
dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
dm zoned: reduce overhead of backing device checks
dm dust: add limited write failure mode
dm dust: change ret to r in dust_map_read and dust_map
dm dust: change result vars to r
dm cache: replace spin_lock_irqsave with spin_lock_irq
dm bio prison: replace spin_lock_irqsave with spin_lock_irq
dm thin: replace spin_lock_irqsave with spin_lock_irq
dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
dm clone: replace spin_lock_irqsave with spin_lock_irq
dm writecache: handle REQ_FUA
dm writecache: fix uninitialized variable warning
dm stripe: use struct_size() in kmalloc()
dm raid: streamline rs_get_progress() and its raid_status() caller side
dm raid: simplify rs_setup_recovery call chain
dm raid: to ensure resynchronization, perform raid set grow in preresume
...
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct stripe_c {
...
struct stripe stripe[0];
};
In this case alloc_context() and dm_array_too_big() are removed and
replaced by the direct use of the struct_size() helper in kmalloc().
Notice that open-coded form is prone to type mistakes.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull more device mapper updates from Mike Snitzer:
- Fix zone state management race in DM zoned target by eliminating the
unnecessary DMZ_ACTIVE state.
- A couple fixes for issues the DM snapshot target's optional discard
support added during first week of the 5.3 merge.
- Increase default size of outstanding IO that is allowed for a each
dm-kcopyd client and introduce tunable to allow user adjust.
- Update DM core to use printk ratelimiting functions rather than
duplicate them and in doing so fix an issue where DMDEBUG_LIMIT()
rate limited KERN_DEBUG messages had excessive "callbacks suppressed"
messages.
* tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: use printk ratelimiting functions
dm kcopyd: Increase default sub-job size to 512KB
dm snapshot: fix oversights in optional discard support
dm zoned: fix zone state management race
DM provided its own ratelimiting printk wrapper but given printk
advances this is no longer needed.
Also, switching DMDEBUG_LIMIT to using pr_debug_ratelimited() fixes the
reported issue where DMDEBUG_LIMIT() still caused a flood of "callbacks
suppressed" messages.
Reported-by: Milan Broz <gmazyland@gmail.com>
Depends-on: 29fc2bc753 ("printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In
preparation of using vmalloc() for large report buffer and zone array
allocations used by this function, remove its "gfp_t gfp_mask" argument
and rely on the caller context to use memalloc_noio_save/restore() where
necessary (block layer zone revalidation and dm-zoned I/O error path).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 396eaf21ee ("blk-mq: improve DM's blk-mq IO merging via
blk_insert_cloned_request feedback"), map_request() will requeue the tio
when issued clone request return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE.
Thus, if device driver status is error, a tio may be requeued multiple
times until the return value is not DM_MAPIO_REQUEUE. That means
type->start_io may be called multiple times, while type->end_io is only
called when IO complete.
In fact, even without commit 396eaf21ee, setup_clone() failure can
also cause tio requeue and associated missed call to type->end_io.
The service-time path selector selects path based on in_flight_size,
which is increased by st_start_io() and decreased by st_end_io().
Missed calls to st_end_io() can lead to in_flight_size count error and
will cause the selector to make the wrong choice. In addition,
queue-length path selector will also be affected.
To fix the problem, call type->end_io in ->release_clone_rq before tio
requeue. map_info is passed to ->release_clone_rq() for map_request()
error path that result in requeue.
Fixes: 396eaf21ee ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Cc: stable@vger.kernl.org
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a "create" module parameter, which allows device-mapper targets to
be configured at boot time. This enables early use of DM targets in the
boot process (as the root device or otherwise) without the need of an
initramfs.
The syntax used in the boot param is based on the concise format from
the dmsetup tool to follow the rule of least surprise:
dmsetup table --concise /dev/mapper/lroot
Which is:
dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+]
Where,
<name> ::= The device name.
<uuid> ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | ""
<minor> ::= The device minor number | ""
<flags> ::= "ro" | "rw"
<table> ::= <start_sector> <num_sectors> <target_type> <target_args>
<target_type> ::= "verity" | "linear" | ...
For example, the following could be added in the boot parameters:
dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0
Only the targets that were tested are allowed and the ones that don't
change any block device when the device is create as read-only. For
example, mirror and cache targets are not allowed. The rationale behind
this is that if the user makes a mistake, choosing the wrong device to
be the mirror or the cache can corrupt data.
The only targets initially allowed are:
* crypt
* delay
* linear
* snapshot-origin
* striped
* verity
Co-developed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A dm-raid array with devices larger than 4GB won't assemble on
a 32 bit host since _check_data_dev_sectors() was added in 4.16.
This is because to_sector() treats its argument as an "unsigned long"
which is 32bits (4GB) on a 32bit host. Using "unsigned long long"
is more correct.
Kernels as early as 4.2 can have other problems due to to_sector()
being used on the size of a device.
Fixes: 0cf4503174 ("dm raid: add support for the MD RAID0 personality")
cc: stable@vger.kernel.org (v4.2+)
Reported-and-tested-by: Guillaume Perréal <gperreal@free.fr>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is no need to have DM core split discards on behalf of a DM target
now that blk_queue_split() handles splitting discards based on the
queue_limits. A DM target just needs to set max_discard_sectors,
discard_granularity, etc, in queue_limits.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull device mapper updates from Mike Snitzer:
- The biggest change this cycle is to remove support for the legacy IO
path (.request_fn) from request-based DM.
Jens has already started preparing for complete removal of the legacy
IO path in 4.21 but this earlier removal of support from DM has been
coordinated with Jens (as evidenced by the commit being attributed to
him).
Making request-based DM exclussively blk-mq only cleans up that
portion of DM core quite nicely.
- Convert the thinp and zoned targets over to using refcount_t where
applicable.
- A couple fixes to the DM zoned target for refcounting and other races
buried in the implementation of metadata block creation and use.
- Small cleanups to remove redundant unlikely() around a couple
WARN_ON_ONCE().
- Simplify how dm-ioctl copies from userspace, eliminating some
potential for a malicious user trying to change the executed ioctl
after its processing has begun.
- Tweaked DM crypt target to use the DM device name when naming the
various workqueues created for a particular DM crypt device (makes
the N workqueues for a DM crypt device more easily understood and
enhances user's accounting capabilities at a glance via "ps")
- Small fixup to remove dead branch in DM writecache's memory_entry().
* tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: remove disabled code in memory_entry()
dm zoned: fix various dmz_get_mblock() issues
dm zoned: fix metadata block ref counting
dm raid: avoid bitmap with raid4/5/6 journal device
dm crypt: make workqueue names device-specific
dm: add dm_table_device_name()
dm ioctl: harden copy_params()'s copy_from_user() from malicious users
dm: remove unnecessary unlikely() around WARN_ON_ONCE()
dm zoned: target: use refcount_t for dm zoned reference counters
dm thin: use refcount_t for thin_c reference counting
dm table: require that request-based DM be layered on blk-mq devices
dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASED
dm: remove legacy request-based IO path
Dispatching a report zones command through the request queue is a major
pain due to the command reply payload rewriting necessary. Given that
blkdev_report_zones() is executing everything synchronously, implement
report zones as a block device file operation instead, allowing major
simplification of the code in many places.
sd, null-blk, dm-linear and dm-flakey being the only block device
drivers supporting exposing zoned block devices, these drivers are
modified to provide the device side implementation of the
report_zones() block device file operation.
For device mappers, a new report_zones() target type operation is
defined so that the upper block layer calls blkdev_report_zones() can
be propagated down to the underlying devices of the dm targets.
Implementation for this new operation is added to the dm-linear and
dm-flakey targets.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Changed method block_device argument to gendisk
* Various bug fixes and improvements
* Added support for null_blk, dm-linear and dm-flakey.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that request-based DM is only using blk-mq, there is no need to
differentiate between legacy "rq" and new "mq". We're back to a single
request-based DM -- and there was much rejoicing!
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Similar to the ->copy_from_iter() operation, a platform may want to
deploy an architecture or device specific routine for handling reads
from a dax_device like /dev/pmemX. On x86 this routine will point to a
machine check safe version of copy_to_iter(). For now, add the plumbing
to device-mapper and the dax core.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull device mapper updates from Mike Snitzer:
- DM core passthrough ioctl fix to retain reference to DM table, and
that table's block devices, while issuing the ioctl to one of those
block devices.
- DM core passthrough ioctl fix to _not_ override the fmode_t used to
issue the ioctl. Overriding by using the fmode_t that the block
device was originally open with during DM table load is a liability.
- Add DM core support for secure erase forwarding and update the DM
linear and DM striped targets to support them.
- A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
same, write zeroes) for targets that make use of the non-splitting IO
variant (as is done for multipath or thinp when layered directly on
NVMe).
- Allow DM targets to return a payload in response to a DM message that
they are sent. This is useful for DM targets that would like to
provide statistics data in response to DM messages.
- Update DM bufio to support non-power-of-2 block sizes. Numerous other
related changes prepare the DM bufio code for this support.
- Fix DM crypt to use a bounded amount of memory across the entire
system. This is to avoid OOM that can otherwise occur in response to
certain pathological IO workloads (e.g. discarding a large DM crypt
device).
- Add a 'check_at_most_once' feature to the DM verity target to allow
verity to be used on mobile devices that have very limited resources.
- Fix the DM integrity target to fail early if a keyed algorithm (e.g.
HMAC) is to be used but the key isn't set.
- Add non-power-of-2 support to the DM unstripe target.
- Eliminate the use of a Variable Length Array in the DM stripe target.
- Update the DM log-writes target to record metadata (REQ_META flag).
- DM raid fixes for its nosync status and some variable range issues.
* tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: remove fmode_t argument from .prepare_ioctl hook
dm: hold DM table for duration of ioctl rather than use blkdev_get
dm raid: fix parse_raid_params() variable range issue
dm verity: make verity_for_io_block static
dm verity: add 'check_at_most_once' option to only validate hashes once
dm bufio: don't embed a bio in the dm_buffer structure
dm bufio: support non-power-of-two block sizes
dm bufio: use slab cache for dm_buffer structure allocations
dm bufio: reorder fields in dm_buffer structure
dm bufio: relax alignment constraint on slab cache
dm bufio: remove code that merges slab caches
dm bufio: get rid of slab cache name allocations
dm bufio: move dm-bufio.h to include/linux/
dm bufio: delete outdated comment
dm: add support for secure erase forwarding
dm: backfill abnormal IO support to non-splitting IO submission
dm raid: fix nosync status
dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios()
dm stripe: get rid of a Variable Length Array (VLA)
dm log writes: record metadata flag for better flags record
...
Use the fmode_t that is passed to dm_blk_ioctl() rather than
inconsistently (varies across targets) drop it on the floor by
overriding it with the fmode_t stored in 'struct dm_dev'.
All the persistent reservation functions weren't using the fmode_t they
got back from .prepare_ioctl so remove them.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Set QUEUE_FLAG_SECERASE in DM device's queue_flags if a DM table's
data devices support secure erase.
Also, add support for secure erase to both the linear and striped
targets.
Signed-off-by: Denis Semakin <d.semakin@omprussia.ru>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Could be useful for a target to return stats or other information.
If a target does DMEMIT() anything to @result from its .message method
then it must return 1 to the caller.
Signed-off-By: Mike Snitzer <snitzer@redhat.com>
It happens often while I'm preparing a patch for a block driver that
I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT
available for this driver? Do I have to introduce definitions of these
constants before I can use these constants? To avoid this confusion,
move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the
<linux/blkdev.h> header file such that these become available for all
block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h
header file conditional to avoid that including that header file after
<linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE
redefinition.
Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have
not been removed from uapi header files nor from NAND drivers in
which these constants are used for another purpose than converting
block layer offsets and sizes into a number of sectors.
Cc: David S. Miller <davem@davemloft.net>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add DM_ENDIO_DELAY_REQUEUE to allow request-based multipath's
multipath_end_io() to instruct dm-rq.c:dm_done() to delay a requeue.
This is beneficial to do if BLK_STS_RESOURCE is returned from the target
(because target is busy).
Relative to blk-mq: kick the hw queues via blk_mq_requeue_work(),
indirectly from dm-rq.c:__dm_mq_kick_requeue_list(), after a delay.
For old .request_fn: use blk_delay_queue().
bio-based multipath doesn't have feature parity with request-based for
retryable error requeues; that is something that'll need fixing in the
future.
Suggested-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Bart Van Assche <bart.vanassche@wdc.com>
[as interpreted from Bart's "... patch looks fine to me."]
If anyone is going to use dm_table_create(), they probably should be
able to use dm_table_destroy() too. Move the dm_table_destroy()
definition outside the private header, near dm_table_create()
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If dm_table_determine_type() establishes DM_TYPE_NVME_BIO_BASED then
all devices in the DM table do not support partial completions. Also,
the table has a single immutable target that doesn't require DM core to
split bios.
This will enable adding NVMe optimizations to bio-based DM.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Eliminates need for a separate mempool to allocate 'struct dm_io'
objects from. As such, it saves an extra mempool allocation for each
original bio that DM core is issued.
This complicates the per-bio-data accessor functions by needing to
conditonally add extra padding to get to a target's per-bio-data. But
in the end this provides a decent performance improvement for all
bio-based DM devices.
On an NVMe-loop based testbed to a ramdisk (~3100 MB/s): bio-based
DM linear performance improved by 2% (went from 2665 to 2777 MB/s).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No DM target provides num_write_bios and none has since dm-cache's
brief use in 2013.
Having the possibility of num_write_bios > 1 complicates bio
allocation. So remove the interface and assume there is only one bio
needed.
If a target ever needs more, it must provide a suitable bioset and
allocate itself based on its particular needs.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit abebfbe2f7 ("dm: add ->flush() dax operation support") is
buggy. A DM device may be composed of multiple underlying devices and
all of them need to be flushed. That commit just routes the flush
request to the first device and ignores the other devices.
It could be fixed by adding more complex logic to the device mapper. But
there is only one implementation of the method pmem_dax_ops->flush - that
is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we
don't need the pmem_dax_ops->flush abstraction at all, we can call
arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush
can't ever reach anything different from arch_wb_cache_pmem().
It should be also pointed out that for some uses of persistent memory it
is needed to flush only a very small amount of data (such as 1 cacheline),
and it would be overkill if we go through that device mapper machinery for
a single flushed cache line.
Fix this by removing the pmem_dax_ops->flush abstraction and call
arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device
mapper code that forwards the flushes.
Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The arrays of 'struct dm_arg' are never modified by the device-mapper
core, so constify them so that they are placed in .rodata.
(Exception: the args array in dm-raid cannot be constified because it is
allocated on the stack and modified.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.
Fixes: 71a16736a1 ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull libnvdimm updates from Dan Williams:
"libnvdimm updates for the latest ACPI and UEFI specifications. This
pull request also includes new 'struct dax_operations' enabling to
undo the abuse of copy_user_nocache() for copy operations to pmem.
The dax work originally missed 4.12 to address concerns raised by Al.
Summary:
- Introduce the _flushcache() family of memory copy helpers and use
them for persistent memory write operations on x86. The
_flushcache() semantic indicates that the cache is either bypassed
for the copy operation (movnt) or any lines dirtied by the copy
operation are written back (clwb, clflushopt, or clflush).
- Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
- Add support for the new NVDIMM platform/firmware mechanisms
introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
namespace label format, extensions to the address-range-scrub
command set, new error injection commands, and a new BTT
(block-translation-table) layout. These updates support inter-OS
and pre-OS compatibility.
- Fix a longstanding memory corruption bug in nfit_test.
- Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
- Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed: commit
6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
<toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
libnvdimm, namespace: record 'lbasize' for pmem namespaces
acpi/nfit: Issue Start ARS to retrieve existing records
libnvdimm: New ACPI 6.2 DSM functions
acpi, nfit: Show bus_dsm_mask in sysfs
libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
acpi, nfit: Enable DSM pass thru for root functions.
libnvdimm: passthru functions clear to send
libnvdimm, btt: convert some info messages to warn/err
libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
libnvdimm: fix the clear-error check in nsio_rw_bytes
libnvdimm, btt: fix btt_rw_page not returning errors
acpi, nfit: quiet invalid block-aperture-region warnings
libnvdimm, btt: BTT updates for UEFI 2.7 format
acpi, nfit: constify *_attribute_group
libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
libnvdimm, pmem, dax: export a cache control attribute
dax: convert to bitmask for flags
dax: remove default copy_from_iter fallback
libnvdimm, nfit: enable support for volatile ranges
libnvdimm, pmem: fix persistence warning
...
A target driver support zoned block devices and exposing it as such may
receive REQ_OP_ZONE_REPORT request for the user to determine the mapped
device zone configuration. To process properly such request, the target
driver may need to remap the zone descriptors provided in the report
reply. The helper function dm_remap_zone_report() does this generically
using only the target start offset and length and the start offset
within the target device.
dm_remap_zone_report() will remap the start sector of all zones
reported. If the report includes sequential zones, the write pointer
position of these zones will also be remapped.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
1) Introduce DM_TARGET_ZONED_HM feature flag:
The target drivers currently available will not operate correctly if a
table target maps onto a host-managed zoned block device.
To avoid problems, introduce the new feature flag DM_TARGET_ZONED_HM to
allow a target to explicitly state that it supports host-managed zoned
block devices. This feature is checked for all targets in a table if
any of the table's block devices are host-managed.
Note that as host-aware zoned block devices are backward compatible with
regular block devices, they can be used by any of the current target
types. This new feature is thus restricted to host-managed zoned block
devices.
2) Check device area zone alignment:
If a target maps to a zoned block device, check that the device area is
aligned on zone boundaries to avoid problems with REQ_OP_ZONE_RESET
operations (resetting a partially mapped sequential zone would not be
possible). This also facilitates the processing of zone report with
REQ_OP_ZONE_REPORT bios.
3) Check block devices zone model compatibility
When setting the DM device's queue limits, several possibilities exists
for zoned block devices:
1) The DM target driver may want to expose a different zone model
(e.g. host-managed device emulation or regular block device on top of
host-managed zoned block devices)
2) Expose the underlying zone model of the devices as-is
To allow both cases, the underlying block device zone model must be set
in the target limits in dm_set_device_limits() and the compatibility of
all devices checked similarly to the logical block size alignment. For
this last check, introduce validate_hardware_zoned_model() to check that
all targets of a table have the same zone model and that the zone size
of the target devices are equal.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
[Mike Snitzer refactored Damien's original work to simplify the code]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using pr_<level> is the more common logging style.
Standardize style and use new macro DM_FMT.
Use no_printk in DMDEBUG macros when CONFIG_DM_DEBUG is not #defined.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
