The broadcast device is switched to oneshot mode when the system switches
to oneshot mode. If a broadcast clock event device is registered after the
system switched to oneshot mode, it will stay in periodic mode forever.
Ensure that a late registered device which is selected as broadcast device
is initialized in oneshot mode when the system already uses oneshot mode.
[ tglx: Massage changelog ]
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210331083318.21794-1-jindong.yue@nxp.com
(cherry picked from commit 9c336c9935
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core)
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: If570b8d396f84add2266150bc85d5c82c45bcb0f
Bug: 185092876
Changes in 5.10.26
ASoC: ak4458: Add MODULE_DEVICE_TABLE
ASoC: ak5558: Add MODULE_DEVICE_TABLE
spi: cadence: set cqspi to the driver_data field of struct device
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda: generic: Fix the micmute led init state
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
Revert "PM: runtime: Update device status before letting suppliers suspend"
s390/vtime: fix increased steal time accounting
s390/pci: refactor zpci_create_device()
s390/pci: remove superfluous zdev->zbus check
s390/pci: fix leak of PCI device structure
zonefs: Fix O_APPEND async write handling
zonefs: prevent use of seq files as swap file
zonefs: fix to update .i_wr_refcnt correctly in zonefs_open_zone()
btrfs: fix race when cloning extent buffer during rewind of an old root
btrfs: fix slab cache flags for free space tree bitmap
vhost-vdpa: fix use-after-free of v->config_ctx
vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
drm/amd/display: Correct algorithm for reversed gamma
ASoC: fsl_ssi: Fix TDM slot setup for I2S mode
ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 10-p0XX OVCD current threshold
ASoC: SOF: Intel: unregister DMIC device on probe error
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
ASoC: simple-card-utils: Do not handle device clock
afs: Fix accessing YFS xattrs on a non-YFS server
afs: Stop listxattr() from listing "afs.*" attributes
ALSA: usb-audio: Fix unintentional sign extension issue
nvme: fix Write Zeroes limitations
nvme-tcp: fix misuse of __smp_processor_id with preemption enabled
nvme-tcp: fix possible hang when failing to set io queues
nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU
nvmet: don't check iosqes,iocqes for discovery controllers
nfsd: Don't keep looking up unhashed files in the nfsd file cache
nfsd: don't abort copies early
NFSD: Repair misuse of sv_lock in 5.10.16-rt30.
NFSD: fix dest to src mount in inter-server COPY
svcrdma: disable timeouts on rdma backchannel
vfio: IOMMU_API should be selected
vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
sunrpc: fix refcount leak for rpc auth modules
i915/perf: Start hrtimer only if sampling the OA buffer
pstore: Fix warning in pstore_kill_sb()
io_uring: ensure that SQPOLL thread is started for exit
net/qrtr: fix __netdev_alloc_skb call
kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
cifs: fix allocation size on newly created files
riscv: Correct SPARSEMEM configuration
scsi: lpfc: Fix some error codes in debugfs
scsi: myrs: Fix a double free in myrs_cleanup()
scsi: ufs: ufs-mediatek: Correct operator & -> &&
RISC-V: correct enum sbi_ext_rfence_fid
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
gpiolib: Assign fwnode to parent's if no primary one provided
nvme-rdma: fix possible hang when failing to set io queues
ibmvnic: add some debugs
ibmvnic: serialize access to work queue on remove
tty: serial: stm32-usart: Remove set but unused 'cookie' variables
serial: stm32: fix DMA initialization error handling
bpf: Declare __bpf_free_used_maps() unconditionally
RDMA/rtrs: Remove unnecessary argument dir of rtrs_iu_free
RDMA/rtrs-srv: Jump to dereg_mr label if allocate iu fails
RDMA/rtrs: Introduce rtrs_post_send
RDMA/rtrs: Fix KASAN: stack-out-of-bounds bug
module: merge repetitive strings in module_sig_check()
module: avoid *goto*s in module_sig_check()
module: harden ELF info handling
scsi: pm80xx: Make mpi_build_cmd locking consistent
scsi: pm80xx: Make running_req atomic
scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition
scsi: pm8001: Neaten debug logging macros and uses
scsi: libsas: Remove notifier indirection
scsi: libsas: Introduce a _gfp() variant of event notifiers
scsi: mvsas: Pass gfp_t flags to libsas event notifiers
scsi: isci: Pass gfp_t flags in isci_port_link_down()
scsi: isci: Pass gfp_t flags in isci_port_link_up()
scsi: isci: Pass gfp_t flags in isci_port_bc_change_received()
RDMA/mlx5: Allow creating all QPs even when non RDMA profile is used
powerpc/sstep: Fix load-store and update emulation
powerpc/sstep: Fix darn emulation
i40e: Fix endianness conversions
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
MIPS: compressed: fix build with enabled UBSAN
drm/amd/display: turn DPMS off on connector unplug
iwlwifi: Add a new card for MA family
io_uring: fix inconsistent lock state
media: cedrus: h264: Support profile controls
ibmvnic: remove excessive irqsave
s390/qeth: schedule TX NAPI on QAOB completion
drm/amd/pm: fulfill the Polaris implementation for get_clock_by_type_with_latency()
io_uring: don't attempt IO reissue from the ring exit path
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
net: bonding: fix error return code of bond_neigh_init()
regulator: pca9450: Add SD_VSEL GPIO for LDO5
regulator: pca9450: Enable system reset on WDOG_B assertion
regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting
gfs2: Add common helper for holding and releasing the freeze glock
gfs2: move freeze glock outside the make_fs_rw and _ro functions
gfs2: bypass signal_our_withdraw if no journal
powerpc: Force inlining of cpu_has_feature() to avoid build failure
usb-storage: Add quirk to defeat Kindle's automatic unload
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: gadget: configfs: Fix KASAN use-after-free
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: dwc3: gadget: Allow runtime suspend if UDC unbinded
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
iio: hid-sensor-prox: Fix scale not correct issue
iio: hid-sensor-temperature: Fix issues of timestamp channel
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
PCI: rpadlpar: Fix potential drc_name corruption in store functions
perf/x86/intel: Fix a crash caused by zero PEBS status
perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
x86/ioapic: Ignore IRQ2 again
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
x86: Move TS_COMPAT back to asm/thread_info.h
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
efivars: respect EFI_UNSUPPORTED return from firmware
ext4: fix error handling in ext4_end_enable_verity()
ext4: find old entry again if failed to rename whiteout
ext4: stop inode update before return
ext4: do not try to set xattr into ea_inode if value is empty
ext4: fix potential error in ext4_do_update_inode
ext4: fix rename whiteout with fast commit
MAINTAINERS: move some real subsystems off of the staging mailing list
MAINTAINERS: move the staging subsystem to lists.linux.dev
static_call: Fix static_call_update() sanity check
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
genirq: Disable interrupts for force threaded handlers
x86/apic/of: Fix CPU devicetree-node lookups
cifs: Fix preauth hash corruption
Linux 5.10.26
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I6f6bdd1dc46dc744c848e778f9edd0be558b46ac
Changes in 5.10.24
uapi: nfnetlink_cthelper.h: fix userspace compilation error
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
powerpc/pseries: Don't enforce MSI affinity with kdump
ethernet: alx: fix order of calls on resume
crypto: mips/poly1305 - enable for all MIPS processors
ath9k: fix transmitting to stations in dynamic SMPS mode
net: Fix gro aggregation for udp encaps with zero csum
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: l2tp: reduce log level of messages in receive path, add counter instead
can: skb: can_skb_set_owner(): fix ref counting if socket was closed before setting skb ownership
can: flexcan: assert FRZ bit in flexcan_chip_freeze()
can: flexcan: enable RX FIFO after FRZ/HALT valid
can: flexcan: invoke flexcan_chip_freeze() to enter freeze mode
can: tcan4x5x: tcan4x5x_init(): fix initialization - clear MRAM before entering Normal Mode
tcp: Fix sign comparison bug in getsockopt(TCP_ZEROCOPY_RECEIVE)
tcp: add sanity tests to TCP_QUEUE_SEQ
netfilter: nf_nat: undo erroneous tcp edemux lookup
netfilter: x_tables: gpf inside xt_find_revision()
net: always use icmp{,v6}_ndo_send from ndo_start_xmit
net: phy: fix save wrong speed and duplex problem if autoneg is on
selftests/bpf: Use the last page in test_snprintf_btf on s390
selftests/bpf: No need to drop the packet when there is no geneve opt
selftests/bpf: Mask bpf_csum_diff() return value to 16 bits in test_verifier
samples, bpf: Add missing munmap in xdpsock
libbpf: Clear map_info before each bpf_obj_get_info_by_fd
ibmvnic: Fix possibly uninitialized old_num_tx_queues variable warning.
ibmvnic: always store valid MAC address
mt76: dma: do not report truncated frames to mac80211
powerpc/603: Fix protection of user pages mapped with PROT_NONE
mount: fix mounting of detached mounts onto targets that reside on shared mounts
cifs: return proper error code in statfs(2)
Revert "mm, slub: consider rest of partial list if acquire_slab() fails"
docs: networking: drop special stable handling
net: dsa: tag_rtl4_a: fix egress tags
sh_eth: fix TRSCER mask for SH771x
net: enetc: don't overwrite the RSS indirection table when initializing
net: enetc: take the MDIO lock only once per NAPI poll cycle
net: enetc: fix incorrect TPID when receiving 802.1ad tagged packets
net: enetc: don't disable VLAN filtering in IFF_PROMISC mode
net: enetc: force the RGMII speed and duplex instead of operating in inband mode
net: enetc: remove bogus write to SIRXIDR from enetc_setup_rxbdr
net: enetc: keep RX ring consumer index in sync with hardware
net: ethernet: mtk-star-emac: fix wrong unmap in RX handling
net/mlx4_en: update moderation when config reset
net: stmmac: fix incorrect DMA channel intr enable setting of EQoS v4.10
nexthop: Do not flush blackhole nexthops when loopback goes down
net: sched: avoid duplicates in classes dump
net: mscc: ocelot: properly reject destination IP keys in VCAP IS1
net: dsa: sja1105: fix SGMII PCS being forced to SPEED_UNKNOWN instead of SPEED_10
net: usb: qmi_wwan: allow qmimux add/del with master up
netdevsim: init u64 stats for 32bit hardware
cipso,calipso: resolve a number of problems with the DOI refcounts
net: stmmac: Fix VLAN filter delete timeout issue in Intel mGBE SGMII
stmmac: intel: Fixes clock registration error seen for multiple interfaces
net: lapbether: Remove netif_start_queue / netif_stop_queue
net: davicom: Fix regulator not turned off on failed probe
net: davicom: Fix regulator not turned off on driver removal
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: qrtr: fix error return code of qrtr_sendmsg()
s390/qeth: fix memory leak after failed TX Buffer allocation
r8169: fix r8168fp_adjust_ocp_cmd function
ixgbe: fail to create xfrm offload of IPsec tunnel mode SA
tools/resolve_btfids: Fix build error with older host toolchains
perf build: Fix ccache usage in $(CC) when generating arch errno table
net: stmmac: stop each tx channel independently
net: stmmac: fix watchdog timeout during suspend/resume stress test
net: stmmac: fix wrongly set buffer2 valid when sph unsupport
ethtool: fix the check logic of at least one channel for RX/TX
net: phy: make mdio_bus_phy_suspend/resume as __maybe_unused
selftests: forwarding: Fix race condition in mirror installation
mlxsw: spectrum_ethtool: Add an external speed to PTYS register
perf traceevent: Ensure read cmdlines are null terminated.
perf report: Fix -F for branch & mem modes
net: hns3: fix query vlan mask value error for flow director
net: hns3: fix bug when calculating the TCAM table info
s390/cio: return -EFAULT if copy_to_user() fails again
bnxt_en: reliably allocate IRQ table on reset to avoid crash
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
gpiolib: acpi: Allow to find GpioInt() resource by name and index
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
gpio: fix gpio-device list corruption
drm/compat: Clear bounce structures
drm/amd/display: Add a backlight module option
drm/amdgpu/display: use GFP_ATOMIC in dcn21_validate_bandwidth_fp()
drm/amd/display: Fix nested FPU context in dcn21_validate_bandwidth()
drm/amd/pm: bug fix for pcie dpm
drm/amdgpu/display: simplify backlight setting
drm/amdgpu/display: don't assert in set backlight function
drm/amdgpu/display: handle aux backlight in backlight_get_brightness
drm/shmem-helper: Check for purged buffers in fault handler
drm/shmem-helper: Don't remove the offset in vm_area_struct pgoff
drm: Use USB controller's DMA mask when importing dmabufs
drm: meson_drv add shutdown function
drm/shmem-helpers: vunmap: Don't put pages for dma-buf
drm/i915: Wedge the GPU if command parser setup fails
s390/cio: return -EFAULT if copy_to_user() fails
s390/crypto: return -EFAULT if copy_to_user() fails
qxl: Fix uninitialised struct field head.surface_id
sh_eth: fix TRSCER mask for R7S9210
media: usbtv: Fix deadlock on suspend
media: rkisp1: params: fix wrong bits settings
media: v4l: vsp1: Fix uif null pointer access
media: v4l: vsp1: Fix bru null pointer access
media: rc: compile rc-cec.c into rc-core
cifs: fix credit accounting for extra channel
net: hns3: fix error mask definition of flow director
s390/qeth: don't replace a fully completed async TX buffer
s390/qeth: remove QETH_QDIO_BUF_HANDLED_DELAYED state
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix notification for pending buffers during teardown
net: dsa: implement a central TX reallocation procedure
net: dsa: tag_ksz: don't allocate additional memory for padding/tagging
net: dsa: trailer: don't allocate additional memory for padding/tagging
net: dsa: tag_qca: let DSA core deal with TX reallocation
net: dsa: tag_ocelot: let DSA core deal with TX reallocation
net: dsa: tag_mtk: let DSA core deal with TX reallocation
net: dsa: tag_lan9303: let DSA core deal with TX reallocation
net: dsa: tag_edsa: let DSA core deal with TX reallocation
net: dsa: tag_brcm: let DSA core deal with TX reallocation
net: dsa: tag_dsa: let DSA core deal with TX reallocation
net: dsa: tag_gswip: let DSA core deal with TX reallocation
net: dsa: tag_ar9331: let DSA core deal with TX reallocation
net: dsa: tag_mtk: fix 802.1ad VLAN egress
enetc: Fix unused var build warning for CONFIG_OF
net: enetc: initialize RFS/RSS memories for unused ports too
ath11k: peer delete synchronization with firmware
ath11k: start vdev if a bss peer is already created
ath11k: fix AP mode for QCA6390
i2c: rcar: faster irq code to minimize HW race condition
i2c: rcar: optimize cacheline to minimize HW race condition
scsi: ufs: WB is only available on LUN #0 to #7
udf: fix silent AED tagLocation corruption
iommu/vt-d: Clear PRQ overflow only when PRQ is empty
mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'
mmc: mediatek: fix race condition between msdc_request_timeout and irq
mmc: sdhci-iproc: Add ACPI bindings for the RPi
Platform: OLPC: Fix probe error handling
powerpc/pci: Add ppc_md.discover_phbs()
spi: stm32: make spurious and overrun interrupts visible
powerpc: improve handling of unrecoverable system reset
powerpc/perf: Record counter overflow always if SAMPLE_IP is unset
HID: logitech-dj: add support for the new lightspeed connection iteration
powerpc/64: Fix stack trace not displaying final frame
iommu/amd: Fix performance counter initialization
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
sparc32: Limit memblock allocation to low memory
sparc64: Use arch_validate_flags() to validate ADI flag
Input: applespi - don't wait for responses to commands indefinitely.
PCI: xgene-msi: Fix race in installing chained irq handler
PCI: mediatek: Add missing of_node_put() to fix reference leak
drivers/base: build kunit tests without structleak plugin
PCI/LINK: Remove bandwidth notification
ext4: don't try to processed freed blocks until mballoc is initialized
kbuild: clamp SUBLEVEL to 255
PCI: Fix pci_register_io_range() memory leak
i40e: Fix memory leak in i40e_probe
kasan: fix memory corruption in kasan_bitops_tags test
s390/smp: __smp_rescan_cpus() - move cpumask away from stack
drivers/base/memory: don't store phys_device in memory blocks
sysctl.c: fix underflow value setting risk in vm_table
scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
scsi: target: core: Add cmd length set before cmd complete
scsi: target: core: Prevent underflow for service actions
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
mmc: sdhci: Update firmware interface API
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: assembler: introduce adr_l, ldr_l and str_l macros
ARM: efistub: replace adrl pseudo-op with adr_l macro invocation
ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirk
ALSA: hda/hdmi: Cancel pending works before suspend
ALSA: hda/conexant: Add quirk for mute LED control on HP ZBook G5
ALSA: hda/ca0132: Add Sound BlasterX AE-5 Plus support
ALSA: hda: Drop the BATCH workaround for AMD controllers
ALSA: hda: Flush pending unsolicited events before suspend
ALSA: hda: Avoid spurious unsol event handling during S3/S4
ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound bar
ALSA: usb-audio: Apply the control quirk to Plantronics headsets
ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()
ALSA: usb-audio: fix NULL ptr dereference in usb_audio_probe
ALSA: usb-audio: fix use after free in usb_audio_disconnect
Revert 95ebabde38 ("capabilities: Don't allow writing ambiguous v3 file capabilities")
block: Discard page cache of zone reset target range
block: Try to handle busy underlying device on discard
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: perf: Fix 64-bit event counter read truncation
s390/dasd: fix hanging DASD driver unbind
s390/dasd: fix hanging IO request during DASD driver unbind
software node: Fix node registration
xen/events: reset affinity of 2-level event when tearing it down
mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variants
mmc: core: Fix partition switch time for eMMC
mmc: cqhci: Fix random crash when remove mmc module/card
cifs: do not send close in compound create+close requests
Goodix Fingerprint device is not a modem
USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
USB: gadget: u_ether: Fix a configfs return code
usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
usb: gadget: f_uac1: stop playback on function disable
usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement
usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot
usb: dwc3: qcom: add ACPI device id for sc8180x
usb: dwc3: qcom: Honor wakeup enabled/disabled state
USB: usblp: fix a hang in poll() if disconnected
usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
usb: xhci: do not perform Soft Retry for some xHCI hosts
xhci: Improve detection of device initiated wake signal.
usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
xhci: Fix repeated xhci wake after suspend due to uncleared internal wake state
USB: serial: io_edgeport: fix memory leak in edge_startup
USB: serial: ch341: add new Product ID
USB: serial: cp210x: add ID for Acuity Brands nLight Air Adapter
USB: serial: cp210x: add some more GE USB IDs
usbip: fix stub_dev to check for stream socket
usbip: fix vhci_hcd to check for stream socket
usbip: fix vudc to check for stream socket
usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
usbip: fix vhci_hcd attach_store() races leading to gpf
usbip: fix vudc usbip_sockfd_store races leading to gpf
Revert "serial: max310x: rework RX interrupt handling"
misc/pvpanic: Export module FDT device table
misc: fastrpc: restrict user apps from sending kernel RPC messages
staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
staging: rtl8712: unterminated string leads to read overflow
staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
staging: rtl8192e: Fix possible buffer overflow in _rtl92e_wx_set_scan
staging: comedi: addi_apci_1032: Fix endian problem for COS sample
staging: comedi: addi_apci_1500: Fix endian problem for command sample
staging: comedi: adv_pci1710: Fix endian problem for AI command data
staging: comedi: das6402: Fix endian problem for AI command data
staging: comedi: das800: Fix endian problem for AI command data
staging: comedi: dmm32at: Fix endian problem for AI command data
staging: comedi: me4000: Fix endian problem for AI command data
staging: comedi: pcl711: Fix endian problem for AI command data
staging: comedi: pcl818: Fix endian problem for AI command data
sh_eth: fix TRSCER mask for R7S72100
cpufreq: qcom-hw: fix dereferencing freed memory 'data'
cpufreq: qcom-hw: Fix return value check in qcom_cpufreq_hw_cpu_init()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
SUNRPC: Set memalloc_nofs_save() for sync tasks
NFS: Don't revalidate the directory permissions on a lookup failure
NFS: Don't gratuitously clear the inode cache when lookup failed
NFSv4.2: fix return value of _nfs4_get_security_label()
block: rsxx: fix error return code of rsxx_pci_probe()
nvme-fc: fix racing controller reset and create association
configfs: fix a use-after-free in __configfs_open_file
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
perf/core: Flush PMU internal buffers for per-CPU events
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
powerpc/64s/exception: Clean up a missed SRR specifier
seqlock,lockdep: Fix seqcount_latch_init()
stop_machine: mark helpers __always_inline
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
zram: fix return value on writeback_store
linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
sched/membarrier: fix missing local execution of ipi_sync_rq_state()
efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table
powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
powerpc: Fix inverted SET_FULL_REGS bitop
powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
binfmt_misc: fix possible deadlock in bm_register_write
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
x86/sev-es: Introduce ip_within_syscall_gap() helper
x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
x86/entry: Move nmi entry/exit into common code
x86/sev-es: Correctly track IRQ states in runtime #VC handler
x86/sev-es: Use __copy_from_user_inatomic()
x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Fix exclusive limit for IPA size
mm/userfaultfd: fix memory corruption due to writeprotect
mm/madvise: replace ptrace attach requirement for process_madvise
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
mm/page_alloc.c: refactor initialization of struct page for holes in memory layout
xen/events: don't unmask an event channel when an eoi is pending
xen/events: avoid handling the same event on two cpus at the same time
KVM: arm64: Fix nVHE hyp panic host context restore
RDMA/umem: Use ib_dma_max_seg_size instead of dma_get_max_seg_size
Linux 5.10.24
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ie53a3c1963066a18d41357b6be41cff00690bd40
[ Upstream commit 46eb1701c0 ]
hrtimer_force_reprogram() and hrtimer_interrupt() invokes
__hrtimer_get_next_event() to find the earliest expiry time of hrtimer
bases. __hrtimer_get_next_event() does not update
cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That
needs to be done at the callsites.
hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when
the first expiring timer is a softirq timer and the soft interrupt is not
activated. That's wrong because cpu_base::softirq_expires_next is left
stale when the first expiring timer of all bases is a timer which expires
in hard interrupt context. hrtimer_interrupt() does never update
cpu_base::softirq_expires_next which is wrong too.
That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and
the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting
CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that
timer before the stale cpu_base::softirq_expires_next.
cpu_base::softirq_expires_next is cached to make the check for raising the
soft interrupt fast. In the above case the soft interrupt won't be raised
until clock monotonic reaches the stale cpu_base::softirq_expires_next
value. That's incorrect, but what's worse it that if the softirq timer
becomes the first expiring timer of all clock bases after the hard expiry
timer has been handled the reprogramming of the clockevent from
hrtimer_interrupt() will result in an interrupt storm. That happens because
the reprogramming does not use cpu_base::softirq_expires_next, it uses
__hrtimer_get_next_event() which returns the actual expiry time. Once clock
MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is
raised and the storm subsides.
Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard
bases seperately, update softirq_expires_next and handle the case when a
soft expiring timer is the first of all bases by comparing the expiry times
and updating the required cpu base fields. Split this functionality into a
separate function to be able to use it in hrtimer_interrupt() as well
without copy paste.
Fixes: 5da7016046 ("hrtimer: Implement support for softirq based hrtimers")
Reported-by: Mikael Beckius <mikael.beckius@windriver.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikael Beckius <mikael.beckius@windriver.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the calc_index vendor hook one line ahead to cover more
use cases.
Bug: 181296757
Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org>
Change-Id: I52231a3ccbe622021232c7a54354c5ac02cf3952
Export symbols needed to allow building a schedutil-based vendor module
with GKI.
This is a small price to pay to give vendors the flexibility they need,
and avoids littering cpufreq_schedutil.c with many vendor hooks.
Bug: 170511085
Signed-off-by: Quentin Perret <qperret@google.com>
Change-Id: I8ff8bdb32df5d47124236819efba881c1a2a538d
(cherry picked from commit 34cd6916744b8b2d2107d2d5f10cbacb181e4f6c)
(cherry picked from commit 7587bc9dcf)
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Since we're expecting timers more precisely in short period, add
a vendor hook to calc_index when adding timers. Then we can modify
the index this timer used to make it accurate.
Bug: 178758017
Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org>
Change-Id: Ie0e6493ae7ad53b0cc57eb1bbcf8a0a11f652828
Changes in 5.10.5
net/sched: sch_taprio: reset child qdiscs before freeing them
mptcp: fix security context on server socket
ethtool: fix error paths in ethnl_set_channels()
ethtool: fix string set id check
md/raid10: initialize r10_bio->read_slot before use.
drm/amd/display: Add get_dig_frontend implementation for DCEx
io_uring: close a small race gap for files cancel
jffs2: Allow setting rp_size to zero during remounting
jffs2: Fix NULL pointer dereference in rp_size fs option parsing
spi: dw-bt1: Fix undefined devm_mux_control_get symbol
opp: fix memory leak in _allocate_opp_table
opp: Call the missing clk_put() on error
scsi: block: Fix a race in the runtime power management code
mm/hugetlb: fix deadlock in hugetlb_cow error path
mm: memmap defer init doesn't work as expected
lib/zlib: fix inflating zlib streams on s390
io_uring: don't assume mm is constant across submits
io_uring: use bottom half safe lock for fixed file data
io_uring: add a helper for setting a ref node
io_uring: fix io_sqe_files_unregister() hangs
uapi: move constants from <linux/kernel.h> to <linux/const.h>
tools headers UAPI: Sync linux/const.h with the kernel headers
cgroup: Fix memory leak when parsing multiple source parameters
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
scsi: cxgb4i: Fix TLS dependency
Bluetooth: hci_h5: close serdev device and free hu in h5_close
fbcon: Disable accelerated scrolling
reiserfs: add check for an invalid ih_entry_count
misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()
media: gp8psk: initialize stats at power control logic
f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
ALSA: seq: Use bool for snd_seq_queue internal flags
ALSA: rawmidi: Access runtime->avail always in spinlock
bfs: don't use WARNING: string when it's just info.
ext4: check for invalid block size early when mounting a file system
fcntl: Fix potential deadlock in send_sig{io, urg}()
io_uring: check kthread stopped flag when sq thread is unparked
rtc: sun6i: Fix memleak in sun6i_rtc_clk_init
module: set MODULE_STATE_GOING state when a module fails to load
quota: Don't overflow quota file offsets
rtc: pl031: fix resource leak in pl031_probe
powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()
i3c master: fix missing destroy_workqueue() on error in i3c_master_register
NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode
f2fs: avoid race condition for shrinker count
f2fs: fix race of pending_pages in decompression
module: delay kobject uevent until after module init call
powerpc/64: irq replay remove decrementer overflow check
fs/namespace.c: WARN if mnt_count has become negative
watchdog: rti-wdt: fix reference leak in rti_wdt_probe
um: random: Register random as hwrng-core device
um: ubd: Submit all data segments atomically
NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
ceph: fix inode refcount leak when ceph_fill_inode on non-I_NEW inode fails
drm/amd/display: updated wm table for Renoir
tick/sched: Remove bogus boot "safety" check
s390: always clear kernel stack backchain before calling functions
io_uring: remove racy overflow list fast checks
ALSA: pcm: Clear the full allocated memory at hw_params
dm verity: skip verity work if I/O error when system is shutting down
ext4: avoid s_mb_prefetch to be zero in individual scenarios
device-dax: Fix range release
Linux 5.10.5
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I2b481bfac06bafdef2cf3cc1ac2c2a4ddf9913dc
[ Upstream commit ba8ea8e7dd ]
can_stop_idle_tick() checks whether the do_timer() duty has been taken over
by a CPU on boot. That's silly because the boot CPU always takes over with
the initial clockevent device.
But even if no CPU would have installed a clockevent and taken over the
duty then the question whether the tick on the current CPU can be stopped
or not is moot. In that case the current CPU would have no clockevent
either, so there would be nothing to keep ticking.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.725238293@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Export hrtimer_expire_entry/exit tracepoints, so that vendor modules
can register probes for these tracepoints.
Bug: 175936268
Change-Id: I739f369d3b56e09f8e9061fefdf25830e37e987e
Signed-off-by: Changki Kim <changki.kim@samsung.com>
Add vendor hook to print epoch values when system enter and exit
out of suspend and resume. These epoch values are useful to know
how long the device is in suspend state. These values can be used
to synchronize various subsystem timestamps and have an unique
timestamp to correlate between various subsystems.
Bug: 172945021
Change-Id: I82a01e348d05a46c9c3921869cc9d2fc0fd28867
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Create a vendor hook for jiffies updates by the
tick_do_timer_cpu.
Bug: 148928265
Change-Id: Ia442e20d446b8ce4f2b3f2be76655e72919c76eb
Signed-off-by: Amir Vajid <avajid@codeaurora.org>
UBSAN reports:
Undefined behaviour in ./include/linux/time64.h:127:27
signed integer overflow:
17179869187 * 1000000000 cannot be represented in type 'long long int'
Call Trace:
timespec64_to_ns include/linux/time64.h:127 [inline]
set_cpu_itimer+0x65c/0x880 kernel/time/itimer.c:180
do_setitimer+0x8e/0x740 kernel/time/itimer.c:245
__x64_sys_setitimer+0x14c/0x2c0 kernel/time/itimer.c:336
do_syscall_64+0xa1/0x540 arch/x86/entry/common.c:295
Commit bd40a17576 ("y2038: itimer: change implementation to timespec64")
replaced the original conversion which handled time clamping correctly with
timespec64_to_ns() which has no overflow protection.
Fix it in timespec64_to_ns() as this is not necessarily limited to the
usage in itimers.
[ tglx: Added comment and adjusted the fixes tag ]
Fixes: 361a3bf005 ("time64: Add time64.h header and define struct timespec64")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1598952616-6416-1-git-send-email-prime.zeng@hisilicon.com
Since sched_clock_read_begin() and sched_clock_read_retry() are called
by notrace function sched_clock(), they shouldn't be traceable either,
or else ftrace_graph_caller will run into a dead loop on the path
as below (arm for instance):
ftrace_graph_caller()
prepare_ftrace_return()
function_graph_enter()
ftrace_push_return_trace()
trace_clock_local()
sched_clock()
sched_clock_read_begin/retry()
Fixes: 1b86abc1c6 ("sched_clock: Expose struct clock_read_data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200929082027.16787-1-quanyang.wang@windriver.com
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Export tick_nohz_get_sleep_length() so idle drivers may use this to
determine the available idle time before the next timer wakeup.
Bug: 169136276
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Change-Id: I0d18638d63c032862ae048bc2c3d49fa1bd90291
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
Pull locking updates from Ingo Molnar:
"These are the locking updates for v5.10:
- Add deadlock detection for recursive read-locks.
The rationale is outlined in commit 224ec489d3 ("lockdep/
Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used
to switch between two copies of protected data. This allows the
read path, typically NMIs, to safely interrupt the write side
critical section.
We utilize this new variant for sched-clock, and to make x86 TSC
handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes"
* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
lockdep: Fix lockdep recursion
lockdep: Fix usage_traceoverflow
locking/atomics: Check atomic-arch-fallback.h too
locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
lockdep: Optimize the memory usage of circular queue
seqlock: Unbreak lockdep
seqlock: PREEMPT_RT: Do not starve seqlock_t writers
seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
seqlock: seqcount_t: Implement all read APIs as statement expressions
seqlock: Use unique prefix for seqcount_t property accessors
seqlock: seqcount_LOCKNAME_t: Standardize naming convention
seqlock: seqcount latch APIs: Only allow seqcount_latch_t
rbtree_latch: Use seqcount_latch_t
x86/tsc: Use seqcount_latch_t
timekeeping: Use seqcount_latch_t
time/sched_clock: Use seqcount_latch_t
seqlock: Introduce seqcount_latch_t
mm/swap: Do not abuse the seqcount_t latching API
time/sched_clock: Use raw_read_seqcount_latch() during suspend
...
Pull timekeeping updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core:
- Early boot support for the NMI safe timekeeper by utilizing
local_clock() up to the point where timekeeping is initialized.
This allows printk() to store multiple timestamps in the ringbuffer
which is useful for coordinating dmesg information across a fleet
of machines.
- Provide a multi-timestamp accessor for printk()
- Make timer init more robust by checking for invalid timer flags.
- Comma vs semicolon fixes
Drivers:
- Support for new platforms in existing drivers (SP804 and Renesas
CMT)
- Comma vs semicolon fixes
* tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements
clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements
timers: Mask invalid flags in do_init_timer()
clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
clocksource/drivers/sp804: Add support for Hisilicon sp804 timer
clocksource/drivers/sp804: Support non-standard register offset
clocksource/drivers/sp804: Prepare for support non-standard register offset
clocksource/drivers/sp804: Remove a mismatched comment
clocksource/drivers/sp804: Delete the leading "__" of some functions
clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h
clocksource/drivers/sp804: Cleanup clk_get_sys()
dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
alarmtimer: Convert comma to semicolon
timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper
timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
do_init_timer() accepts any combination of timer flags handed in by the
caller without a sanity check, but only TIMER_DEFFERABLE, TIMER_PINNED and
TIMER_IRQSAFE are valid.
If the supplied flags have other bits set, this could result in
malfunction. If bits are set in TIMER_CPUMASK the first timer usage could
deference a cpu base which is outside the range of possible CPUs. If
TIMER_MIGRATION is set, then the switch_timer_base() will live lock.
Prevent that with a sanity check which warns when invalid flags are
supplied and masks them out.
[ tglx: Made it WARN_ON_ONCE() and added context to the changelog ]
Signed-off-by: Qianli Zhao <zhaoqianli@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/9d79a8aa4eb56713af7379f99f062dedabcde140.1597326756.git.zhaoqianli@xiaomi.com
Latch sequence counters are a multiversion concurrency control mechanism
where the seqcount_t counter even/odd value is used to switch between
two data storage copies. This allows the seqcount_t read path to safely
interrupt its write side critical section (e.g. from NMIs).
Initially, latch sequence counters were implemented as a single write
function, raw_write_seqcount_latch(), above plain seqcount_t. The read
path was expected to use plain seqcount_t raw_read_seqcount().
A specialized read function was later added, raw_read_seqcount_latch(),
and became the standardized way for latch read paths. Having unique read
and write APIs meant that latch sequence counters are basically a data
type of their own -- just inappropriately overloading plain seqcount_t.
The seqcount_latch_t data type was thus introduced at seqlock.h.
Use that new data type instead of seqcount_raw_spinlock_t. This ensures
that only latch-safe APIs are to be used with the sequence counter.
Note that the use of seqcount_raw_spinlock_t was not very useful in the
first place. Only the "raw_" subset of seqcount_t APIs were used at
timekeeping.c. This subset was created for contexts where lockdep cannot
be used. seqcount_LOCKTYPE_t's raison d'être -- verifying that the
seqcount_t writer serialization lock is held -- cannot thus be done.
References: 0c3351d451 ("seqlock: Use raw_ prefix instead of _no_lockdep")
References: 55f3560df9 ("seqlock: Extend seqcount API with associated locks")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200827114044.11173-6-a.darwish@linutronix.de
Latch sequence counters have unique read and write APIs, and thus
seqcount_latch_t was recently introduced at seqlock.h.
Use that new data type instead of plain seqcount_t. This adds the
necessary type-safety and ensures only latching-safe seqcount APIs are
to be used.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200827114044.11173-5-a.darwish@linutronix.de
sched_clock uses seqcount_t latching to switch between two storage
places protected by the sequence counter. This allows it to have
interruptible, NMI-safe, seqcount_t write side critical sections.
Since 7fc26327b7 ("seqlock: Introduce raw_read_seqcount_latch()"),
raw_read_seqcount_latch() became the standardized way for seqcount_t
latch read paths. Due to the dependent load, it has one read memory
barrier less than the currently used raw_read_seqcount() API.
Use raw_read_seqcount_latch() for the suspend path.
Commit aadd6e5caa ("time/sched_clock: Use raw_read_seqcount_latch()")
missed changing that instance of raw_read_seqcount().
References: 1809bfa44e ("timers, sched/clock: Avoid deadlock during read from NMI")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200715092345.GA231464@debian-buster-darwi.lab.linutronix.de
Currently, can_stop_idle_tick() prints "NOHZ: local_softirq_pending HH"
(where "HH" is the hexadecimal softirq vector number) when one or more
non-RCU softirq handlers are still enabled when checking to stop the
scheduler-tick interrupt. This message is not as enlightening as one
might hope, so this commit changes it to "NOHZ tick-stop error: Non-RCU
local softirq work is pending, handler #HH".
Reported-by: Andy Lutomirski <luto@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
printk wants to store various timestamps (MONOTONIC, REALTIME, BOOTTIME) to
make correlation of dmesg from several systems easier.
Provide an interface to retrieve all three timestamps in one go.
There are some caveats:
1) Boot time and late sleep time injection
Boot time is a racy access on 32bit systems if the sleep time injection
happens late during resume and not in timekeeping_resume(). That could be
avoided by expanding struct tk_read_base with boot offset for 32bit and
adding more overhead to the update. As this is a hard to observe once per
resume event which can be filtered with reasonable effort using the
accurate mono/real timestamps, it's probably not worth the trouble.
Aside of that it might be possible on 32 and 64 bit to observe the
following when the sleep time injection happens late:
CPU 0 CPU 1
timekeeping_resume()
ktime_get_fast_timestamps()
mono, real = __ktime_get_real_fast()
inject_sleep_time()
update boot offset
boot = mono + bootoffset;
That means that boot time already has the sleep time adjustment, but
real time does not. On the next readout both are in sync again.
Preventing this for 64bit is not really feasible without destroying the
careful cache layout of the timekeeper because the sequence count and
struct tk_read_base would then need two cache lines instead of one.
2) Suspend/resume timestamps
Access to the time keeper clock source is disabled accross the innermost
steps of suspend/resume. The accessors still work, but the timestamps
are frozen until time keeping is resumed which happens very early.
For regular suspend/resume there is no observable difference vs. sched
clock, but it might affect some of the nasty low level debug printks.
OTOH, access to sched clock is not guaranteed accross suspend/resume on
all systems either so it depends on the hardware in use.
If that turns out to be a real problem then this could be mitigated by
using sched clock in a similar way as during early boot. But it's not as
trivial as on early boot because it needs some careful protection
against the clock monotonic timestamp jumping backwards on resume.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814115512.159981360@linutronix.de
During early boot the NMI safe timekeeper returns 0 until the first
clocksource becomes available.
This prevents it from being used for printk or other facilities which today
use sched clock. sched clock can be available way before timekeeping is
initialized.
The obvious workaround for this is to utilize the early sched clock in the
default dummy clock read function until a clocksource becomes available.
After switching to the clocksource clock MONOTONIC and BOOTTIME will not
jump because the timekeeping_init() bases clock MONOTONIC on sched clock
and the offset between clock MONOTONIC and BOOTTIME is zero during boot.
Clock REALTIME cannot provide useful timestamps during early boot up to
the point where a persistent clock becomes available, which is either in
timekeeping_init() or later when the RTC driver which might depend on I2C
or other subsystems is initialized.
There is a minor difference to sched_clock() vs. suspend/resume. As the
timekeeper clock source might not be accessible during suspend, after
timekeeping_suspend() timestamps freeze up to the point where
timekeeping_resume() is invoked. OTOH this is true for some sched clock
implementations as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814115512.041422402@linutronix.de
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
Pull more timer updates from Thomas Gleixner:
"A set of posix CPU timer changes which allows to defer the heavy work
of posix CPU timers into task work context. The tick interrupt is
reduced to a quick check which queues the work which is doing the
heavy lifting before returning to user space or going back to guest
mode. Moving this out is deferring the signal delivery slightly but
posix CPU timers are inaccurate by nature as they depend on the tick
so there is no real damage. The relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context
tick handler, but it also has the general benefit that the actual
heavy work is accounted to the task/process and not to the tick
interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of
posix CPU timers (which are unpriviledged) is armed for a
task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which
was just established for x86 with the new common entry/exit code which
got merged post 5.8 and is not the case for other KVM architectures"
* tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Select POSIX_CPU_TIMERS_TASK_WORK
posix-cpu-timers: Provide mechanisms to defer timer handling to task_work
posix-cpu-timers: Split run_posix_cpu_timers()
- Add EXPORT_SYMBOL_GPL for nsec_to_clock_t() so that drivers
be loadable as a module.
- This API is required by loadable driver module from samsung to
fetch process uptime based on CPU clock ticks to get the exact time
during which app is scheduled in user mode.
Signed-off-by: Abhilasha Rao <abhilasha.hv@samsung.corp-partner.google.com>
Bug: 158067689
Change-Id: I45be5fd7873dc7c21aa583313499f48f8b10bb1b
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
Running posix CPU timers in hard interrupt context has a few downsides:
- For PREEMPT_RT it cannot work as the expiry code needs to take
sighand lock, which is a 'sleeping spinlock' in RT. The original RT
approach of offloading the posix CPU timer handling into a high
priority thread was clumsy and provided no real benefit in general.
- For fine grained accounting it's just wrong to run this in context of
the timer interrupt because that way a process specific CPU time is
accounted to the timer interrupt.
- Long running timer interrupts caused by a large amount of expiring
timers which can be created and armed by unpriviledged user space.
There is no hard requirement to expire them in interrupt context.
If the signal is targeted at the task itself then it won't be delivered
before the task returns to user space anyway. If the signal is targeted at
a supervisor process then it might be slightly delayed, but posix CPU
timers are inaccurate anyway due to the fact that they are tied to the
tick.
Provide infrastructure to schedule task work which allows splitting the
posix CPU timer code into a quick check in interrupt context and a thread
context expiry and signal delivery function. This has to be enabled by
architectures as it requires that the architecture specific KVM
implementation handles pending task work before exiting to guest mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200730102337.783470146@linutronix.de
