Files
kernel_arpi/tools/scripts/Makefile.include
Linus Torvalds 9d31d23389 Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
2021-04-29 11:57:23 -07:00

160 lines
4.7 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
ifneq ($(O),)
ifeq ($(origin O), command line)
dummy := $(if $(shell cd $(PWD); test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
ABSOLUTE_O := $(shell cd $(PWD); cd $(O) ; pwd)
OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
COMMAND_O := O=$(ABSOLUTE_O)
ifeq ($(objtree),)
objtree := $(O)
endif
endif
endif
# check that the output directory actually exists
ifneq ($(OUTPUT),)
OUTDIR := $(shell cd $(OUTPUT) && pwd)
$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
endif
#
# Include saner warnings here, which can catch bugs:
#
EXTRA_WARNINGS := -Wbad-function-cast
EXTRA_WARNINGS += -Wdeclaration-after-statement
EXTRA_WARNINGS += -Wformat-security
EXTRA_WARNINGS += -Wformat-y2k
EXTRA_WARNINGS += -Winit-self
EXTRA_WARNINGS += -Wmissing-declarations
EXTRA_WARNINGS += -Wmissing-prototypes
EXTRA_WARNINGS += -Wnested-externs
EXTRA_WARNINGS += -Wno-system-headers
EXTRA_WARNINGS += -Wold-style-definition
EXTRA_WARNINGS += -Wpacked
EXTRA_WARNINGS += -Wredundant-decls
EXTRA_WARNINGS += -Wstrict-prototypes
EXTRA_WARNINGS += -Wswitch-default
EXTRA_WARNINGS += -Wswitch-enum
EXTRA_WARNINGS += -Wundef
EXTRA_WARNINGS += -Wwrite-strings
EXTRA_WARNINGS += -Wformat
# Makefiles suck: This macro sets a default value of $(2) for the
# variable named by $(1), unless the variable has been set by
# environment or command line. This is necessary for CC and AR
# because make sets default values, so the simpler ?= approach
# won't work as expected.
define allow-override
$(if $(or $(findstring environment,$(origin $(1))),\
$(findstring command line,$(origin $(1)))),,\
$(eval $(1) = $(2)))
endef
ifneq ($(LLVM),)
$(call allow-override,CC,clang)
$(call allow-override,AR,llvm-ar)
$(call allow-override,LD,ld.lld)
$(call allow-override,CXX,clang++)
$(call allow-override,STRIP,llvm-strip)
else
# Allow setting various cross-compile vars or setting CROSS_COMPILE as a prefix.
$(call allow-override,CC,$(CROSS_COMPILE)gcc)
$(call allow-override,AR,$(CROSS_COMPILE)ar)
$(call allow-override,LD,$(CROSS_COMPILE)ld)
$(call allow-override,CXX,$(CROSS_COMPILE)g++)
$(call allow-override,STRIP,$(CROSS_COMPILE)strip)
endif
CC_NO_CLANG := $(shell $(CC) -dM -E -x c /dev/null | grep -Fq "__clang__"; echo $$?)
ifneq ($(LLVM),)
HOSTAR ?= llvm-ar
HOSTCC ?= clang
HOSTLD ?= ld.lld
else
HOSTAR ?= ar
HOSTCC ?= gcc
HOSTLD ?= ld
endif
# Some tools require Clang, LLC and/or LLVM utils
CLANG ?= clang
LLC ?= llc
LLVM_CONFIG ?= llvm-config
LLVM_OBJCOPY ?= llvm-objcopy
LLVM_STRIP ?= llvm-strip
ifeq ($(CC_NO_CLANG), 1)
EXTRA_WARNINGS += -Wstrict-aliasing=3
endif
# Hack to avoid type-punned warnings on old systems such as RHEL5:
# We should be changing CFLAGS and checking gcc version, but this
# will do for now and keep the above -Wstrict-aliasing=3 in place
# in newer systems.
# Needed for the __raw_cmpxchg in tools/arch/x86/include/asm/cmpxchg.h
#
# See https://lore.kernel.org/lkml/9a8748490611281710g78402fbeh8ff7fcc162dbcbca@mail.gmail.com/
# and https://gcc.gnu.org/gcc-4.8/changes.html,
# that takes into account Linus's comments (search for Wshadow) for the reasoning about
# -Wshadow not being interesting before gcc 4.8.
ifneq ($(filter 3.%,$(MAKE_VERSION)),) # make-3
EXTRA_WARNINGS += -fno-strict-aliasing
EXTRA_WARNINGS += -Wno-shadow
else
EXTRA_WARNINGS += -Wshadow
endif
ifneq ($(findstring $(MAKEFLAGS), w),w)
PRINT_DIR = --no-print-directory
else
NO_SUBDIR = :
endif
ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
silent=1
endif
#
# Define a callable command for descending to a new directory
#
# Call by doing: $(call descend,directory[,target])
#
descend = \
+mkdir -p $(OUTPUT)$(1) && \
$(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2)
QUIET_SUBDIR0 = +$(MAKE) $(COMMAND_O) -C # space to separate -C and subdir
QUIET_SUBDIR1 =
ifneq ($(silent),1)
ifneq ($(V),1)
QUIET_CC = @echo ' CC '$@;
QUIET_CC_FPIC = @echo ' CC FPIC '$@;
QUIET_CLANG = @echo ' CLANG '$@;
QUIET_AR = @echo ' AR '$@;
QUIET_LINK = @echo ' LINK '$@;
QUIET_MKDIR = @echo ' MKDIR '$@;
QUIET_GEN = @echo ' GEN '$@;
QUIET_SUBDIR0 = +@subdir=
QUIET_SUBDIR1 = ;$(NO_SUBDIR) \
echo ' SUBDIR '$$subdir; \
$(MAKE) $(PRINT_DIR) -C $$subdir
QUIET_FLEX = @echo ' FLEX '$@;
QUIET_BISON = @echo ' BISON '$@;
QUIET_GENSKEL = @echo ' GEN-SKEL '$@;
descend = \
+@echo ' DESCEND '$(1); \
mkdir -p $(OUTPUT)$(1) && \
$(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2)
QUIET_CLEAN = @printf ' CLEAN %s\n' $1;
QUIET_INSTALL = @printf ' INSTALL %s\n' $1;
QUIET_UNINST = @printf ' UNINST %s\n' $1;
endif
endif
pound := \#