dec1fbbc1d
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates
NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
TC58NVG0S3E, and TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
- Disable Quad Mode in spi_nor_restore().
- Don't abort BFPT parsing when QER reserved value is used.
- Add support/update capabilities for few flashes.
- Drop s70fl01gs flash: it does not support RDSR(05h) which is
critical for erase/write.
- Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
the release cycle.
SPI NOR controller drivers changes:
- Move the cadence-quadspi driver to spi-mem. The series was taken
through the SPI tree. Merge it also in spi-nor/next to avoid
conflicts during the release cycle.
- intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't support
it.
- Fix performance regression"
* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
MTD: pfow.h: drop a duplicated word
MTD: mtd-abi.h: drop a duplicated word
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: revert "spi-nor: intel: provide a range for poll_timout"
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: intel-spi: Simulate WRDI command
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
mtd: rawnand: stm32_fmc2: get resources from parent node
mtd: rawnand: stm32_fmc2: use regmap APIs
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
...
42 lines
1.3 KiB
Makefile
42 lines
1.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for memory devices
|
|
#
|
|
|
|
obj-$(CONFIG_DDR) += jedec_ddr_data.o
|
|
ifeq ($(CONFIG_DDR),y)
|
|
obj-$(CONFIG_OF) += of_memory.o
|
|
endif
|
|
obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o
|
|
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
|
|
obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o
|
|
obj-$(CONFIG_ARCH_BRCMSTB) += brcmstb_dpfe.o
|
|
obj-$(CONFIG_BT1_L2_CTL) += bt1-l2-ctl.o
|
|
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
|
|
obj-$(CONFIG_TI_EMIF) += emif.o
|
|
obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
|
|
obj-$(CONFIG_FSL_CORENET_CF) += fsl-corenet-cf.o
|
|
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
|
|
obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
|
|
obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o
|
|
obj-$(CONFIG_MTK_SMI) += mtk-smi.o
|
|
obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o
|
|
obj-$(CONFIG_PL353_SMC) += pl353-smc.o
|
|
obj-$(CONFIG_RENESAS_RPCIF) += renesas-rpc-if.o
|
|
obj-$(CONFIG_STM32_FMC2_EBI) += stm32-fmc2-ebi.o
|
|
|
|
obj-$(CONFIG_SAMSUNG_MC) += samsung/
|
|
obj-$(CONFIG_TEGRA_MC) += tegra/
|
|
obj-$(CONFIG_TI_EMIF_SRAM) += ti-emif-sram.o
|
|
ti-emif-sram-objs := ti-emif-pm.o ti-emif-sram-pm.o
|
|
|
|
AFLAGS_ti-emif-sram-pm.o :=-Wa,-march=armv7-a
|
|
|
|
$(obj)/ti-emif-sram-pm.o: $(obj)/ti-emif-asm-offsets.h
|
|
|
|
$(obj)/ti-emif-asm-offsets.h: $(obj)/emif-asm-offsets.s FORCE
|
|
$(call filechk,offsets,__TI_EMIF_ASM_OFFSETS_H__)
|
|
|
|
targets += emif-asm-offsets.s
|
|
clean-files += ti-emif-asm-offsets.h
|