Merge 5.15.80 into android14-5.15

Changes in 5.15.80
	mm: hwpoison: refactor refcount check handling
	mm: hwpoison: handle non-anonymous THP correctly
	mm: shmem: don't truncate page if memory failure happens
	ASoC: wm5102: Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe"
	ASoC: wm5110: Revert "ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe"
	ASoC: wm8997: Revert "ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe"
	ASoC: mt6660: Keep the pm_runtime enables before component stuff in mt6660_i2c_probe
	ASoC: rt1019: Fix the TDM settings
	ASoC: wm8962: Add an event handler for TEMP_HP and TEMP_SPK
	spi: intel: Fix the offset to get the 64K erase opcode
	ASoC: codecs: jz4725b: add missed Line In power control bit
	ASoC: codecs: jz4725b: fix reported volume for Master ctl
	ASoC: codecs: jz4725b: use right control for Capture Volume
	ASoC: codecs: jz4725b: fix capture selector naming
	ASoC: Intel: sof_sdw: add quirk variant for LAPBC710 NUC15
	selftests/futex: fix build for clang
	selftests/intel_pstate: fix build for ARCH=x86_64
	ASoC: rt1308-sdw: add the default value of some registers
	drm/amd/display: Remove wrong pipe control lock
	ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
	RDMA/efa: Add EFA 0xefa2 PCI ID
	btrfs: raid56: properly handle the error when unable to find the missing stripe
	NFSv4: Retry LOCK on OLD_STATEID during delegation return
	ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
	firmware: arm_scmi: Cleanup the core driver removal callback
	i2c: tegra: Allocate DMA memory for DMA engine
	i2c: i801: add lis3lv02d's I2C address for Vostro 5568
	drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
	btrfs: remove pointless and double ulist frees in error paths of qgroup tests
	Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
	x86/cpu: Add several Intel server CPU model numbers
	ASoC: codecs: jz4725b: Fix spelling mistake "Sourc" -> "Source", "Routee" -> "Route"
	mtd: spi-nor: intel-spi: Disable write protection only if asked
	spi: intel: Use correct mask for flash and protected regions
	KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet
	hugetlbfs: don't delete error page from pagecache
	arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
	arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed
	arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed
	arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
	spi: stm32: Print summary 'callbacks suppressed' message
	ARM: dts: at91: sama7g5: fix signal name of pin PB2
	ASoC: core: Fix use-after-free in snd_soc_exit()
	ASoC: tas2770: Fix set_tdm_slot in case of single slot
	ASoC: tas2764: Fix set_tdm_slot in case of single slot
	ARM: at91: pm: avoid soft resetting AC DLL
	serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl()
	serial: 8250_omap: remove wait loop from Errata i202 workaround
	serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()
	serial: 8250: omap: Flush PM QOS work on remove
	serial: imx: Add missing .thaw_noirq hook
	tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send
	bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
	ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
	pinctrl: rockchip: list all pins in a possible mux route for PX30
	scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
	block: sed-opal: kmalloc the cmd/resp buffers
	bpf: Fix memory leaks in __check_func_call
	arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro
	siox: fix possible memory leak in siox_device_add()
	parport_pc: Avoid FIFO port location truncation
	pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
	drm/vc4: kms: Fix IS_ERR() vs NULL check for vc4_kms
	drm/panel: simple: set bpc field for logic technologies displays
	drm/drv: Fix potential memory leak in drm_dev_init()
	drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker()
	ARM: dts: imx7: Fix NAND controller size-cells
	arm64: dts: imx8mm: Fix NAND controller size-cells
	arm64: dts: imx8mn: Fix NAND controller size-cells
	ata: libata-transport: fix double ata_host_put() in ata_tport_add()
	ata: libata-transport: fix error handling in ata_tport_add()
	ata: libata-transport: fix error handling in ata_tlink_add()
	ata: libata-transport: fix error handling in ata_tdev_add()
	nfp: change eeprom length to max length enumerators
	MIPS: fix duplicate definitions for exported symbols
	MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed
	bpf: Initialize same number of free nodes for each pcpu_freelist
	net: bgmac: Drop free_netdev() from bgmac_enet_remove()
	mISDN: fix possible memory leak in mISDN_dsp_element_register()
	net: hinic: Fix error handling in hinic_module_init()
	net: stmmac: ensure tx function is not running in stmmac_xdp_release()
	soc: imx8m: Enable OCOTP clock before reading the register
	net: liquidio: release resources when liquidio driver open failed
	mISDN: fix misuse of put_device() in mISDN_register_device()
	net: macvlan: Use built-in RCU list checking
	net: caif: fix double disconnect client in chnl_net_open()
	bnxt_en: Remove debugfs when pci_register_driver failed
	net: mhi: Fix memory leak in mhi_net_dellink()
	net: dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims
	xen/pcpu: fix possible memory leak in register_pcpu()
	net: ionic: Fix error handling in ionic_init_module()
	net: ena: Fix error handling in ena_init()
	net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
	bridge: switchdev: Fix memory leaks when changing VLAN protocol
	drbd: use after free in drbd_create_device()
	platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
	platform/surface: aggregator: Do not check for repeated unsequenced packets
	cifs: add check for returning value of SMB2_close_init
	net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
	net/x25: Fix skb leak in x25_lapb_receive_frame()
	cifs: Fix wrong return value checking when GETFLAGS
	net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
	net: thunderbolt: Fix error handling in tbnet_init()
	cifs: add check for returning value of SMB2_set_info_init
	ftrace: Fix the possible incorrect kernel message
	ftrace: Optimize the allocation for mcount entries
	ftrace: Fix null pointer dereference in ftrace_add_mod()
	ring_buffer: Do not deactivate non-existant pages
	tracing: Fix memory leak in tracing_read_pipe()
	tracing/ring-buffer: Have polling block on watermark
	tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
	tracing: Fix wild-memory-access in register_synth_event()
	tracing: Fix race where eprobes can be called before the event
	tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
	tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
	drm/amd/display: Add HUBP surface flip interrupt handler
	ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
	ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
	ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
	Revert "usb: dwc3: disable USB core PHY management"
	slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m
	slimbus: stream: correct presence rate frequencies
	speakup: fix a segfault caused by switching consoles
	USB: bcma: Make GPIO explicitly optional
	USB: serial: option: add Sierra Wireless EM9191
	USB: serial: option: remove old LARA-R6 PID
	USB: serial: option: add u-blox LARA-R6 00B modem
	USB: serial: option: add u-blox LARA-L6 modem
	USB: serial: option: add Fibocom FM160 0x0111 composition
	usb: add NO_LPM quirk for Realforce 87U Keyboard
	usb: chipidea: fix deadlock in ci_otg_del_timer
	usb: cdns3: host: fix endless superspeed hub port reset
	usb: typec: mux: Enter safe mode only when pins need to be reconfigured
	iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
	iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
	iio: adc: mp2629: fix wrong comparison of channel
	iio: adc: mp2629: fix potential array out of bound access
	iio: pressure: ms5611: changed hardcoded SPI speed to value limited
	dm ioctl: fix misbehavior if list_versions races with module loading
	serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
	serial: 8250: Flush DMA Rx on RLSI
	serial: 8250_lpss: Configure DMA also w/o DMA filter
	Input: iforce - invert valid length check when fetching device IDs
	maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
	net: phy: marvell: add sleep time after enabling the loopback bit
	scsi: zfcp: Fix double free of FSF request when qdio send fails
	iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
	iommu/vt-d: Set SRE bit only when hardware has SRS cap
	firmware: coreboot: Register bus in module init
	mmc: core: properly select voltage range without power cycle
	mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout
	mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()
	docs: update mediator contact information in CoC doc
	misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()
	perf/x86/intel/pt: Fix sampling using single range output
	nvme: restrict management ioctls to admin
	nvme: ensure subsystem reset is single threaded
	serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
	perf: Improve missing SIGTRAP checking
	ring-buffer: Include dropped pages in counting dirty patches
	tracing: Fix warning on variable 'struct trace_array'
	net: use struct_group to copy ip/ipv6 header addresses
	scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
	scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
	kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
	Input: i8042 - fix leaking of platform device on module removal
	macvlan: enforce a consistent minimal mtu
	tcp: cdg: allow tcp_cdg_release() to be called multiple times
	kcm: avoid potential race in kcm_tx_work
	kcm: close race conditions on sk_receive_queue
	9p: trans_fd/p9_conn_cancel: drop client lock earlier
	gfs2: Check sb_bsize_shift after reading superblock
	gfs2: Switch from strlcpy to strscpy
	9p/trans_fd: always use O_NONBLOCK read/write
	wifi: wext: use flex array destination for memcpy()
	mm: fs: initialize fsdata passed to write_begin/write_end interface
	net/9p: use a dedicated spinlock for trans_fd
	ntfs: fix use-after-free in ntfs_attr_find()
	ntfs: fix out-of-bounds read in ntfs_attr_find()
	ntfs: check overflow when iterating ATTR_RECORDs
	Linux 5.15.80

Change-Id: Idc9aa4c30c528dd194bc813201cbb2c5df8c1d62
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Documentation/process/code-of-conduct-interpretation.rst

@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 79
+SUBLEVEL = 80
 EXTRAVERSION =
 NAME = Trick or Treat
 

arch/arm/boot/dts/imx7s.dtsi

@@ -1255,7 +1255,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/sama7g5-pinfunc.h

@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)

arch/arm/mach-at91/pm_suspend.S

@@ -169,10 +169,15 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
 
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
 	/* Disable DX DLLs. */
 	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
 	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -1017,7 +1017,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -998,7 +998,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -43,7 +43,6 @@
 
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-allow-set-load;
 
 		vin-supply = <&vreg_3p3>;
 	};
@@ -114,6 +113,9 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a_1p8: ldo7 {
@@ -129,6 +131,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a_0p8: ldo11 {
@@ -235,6 +240,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_1p8: ldo7 {
@@ -250,6 +258,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi

@@ -348,6 +348,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
@@ -367,6 +370,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi

@@ -317,6 +317,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_2p85: ldo7 {
@@ -339,6 +342,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {

arch/arm64/boot/dts/qcom/sm8350-hdk.dts

@@ -108,6 +108,9 @@
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
@@ -116,6 +119,9 @@
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p96: ldo7 {
@@ -124,6 +130,9 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
@@ -132,6 +141,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 

arch/arm64/include/asm/cputype.h

@@ -41,7 +41,7 @@
 	(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
 
 #define MIDR_CPU_MODEL(imp, partnum) \
-	(((imp)			<< MIDR_IMPLEMENTOR_SHIFT) | \
+	((_AT(u32, imp)		<< MIDR_IMPLEMENTOR_SHIFT) | \
 	(0xf			<< MIDR_ARCHITECTURE_SHIFT) | \
 	((partnum)		<< MIDR_PARTNUM_SHIFT))
 

arch/mips/kernel/relocate_kernel.S

@@ -145,7 +145,6 @@ LEAF(kexec_smp_wait)
  * kexec_args[0..3] are used to prepare register values.
  */
 
-kexec_args:
 EXPORT(kexec_args)
 arg0:	PTR_WD		0x0
 arg1:	PTR_WD		0x0
@@ -159,7 +158,6 @@ arg3:	PTR_WD		0x0
  * their registers a0-a3. secondary_kexec_args[0..3] are used
  * to prepare register values.
  */
-secondary_kexec_args:
 EXPORT(secondary_kexec_args)
 s_arg0: PTR_WD		0x0
 s_arg1: PTR_WD		0x0
@@ -171,19 +169,16 @@ kexec_flag:
 
 #endif
 
-kexec_start_address:
 EXPORT(kexec_start_address)
 	PTR_WD		0x0
 	.size		kexec_start_address, PTRSIZE
 
-kexec_indirection_page:
 EXPORT(kexec_indirection_page)
 	PTR_WD		0
 	.size		kexec_indirection_page, PTRSIZE
 
 relocate_new_kernel_end:
 
-relocate_new_kernel_size:
 EXPORT(relocate_new_kernel_size)
 	PTR_WD		relocate_new_kernel_end - relocate_new_kernel
 	.size		relocate_new_kernel_size, PTRSIZE

arch/mips/loongson64/reset.c

@@ -16,6 +16,7 @@
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
+#include <asm/bug.h>
 
 #include <loongson.h>
 #include <boot_param.h>
@@ -159,8 +160,17 @@ static int __init mips_reboot_setup(void)
 
 #ifdef CONFIG_KEXEC
 	kexec_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);
+	if (WARN_ON(!kexec_argv))
+		return -ENOMEM;
+
 	kdump_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);
+	if (WARN_ON(!kdump_argv))
+		return -ENOMEM;
+
 	kexec_envp = kmalloc(KEXEC_ENVP_SIZE, GFP_KERNEL);
+	if (WARN_ON(!kexec_envp))
+		return -ENOMEM;
+
 	fw_arg1 = KEXEC_ARGV_ADDR;
 	memcpy(kexec_envp, (void *)fw_arg2, KEXEC_ENVP_SIZE);
 

arch/x86/events/intel/pt.c

@@ -1247,6 +1247,15 @@ static int pt_buffer_try_single(struct pt_buffer *buf, int nr_pages)
 	if (1 << order != nr_pages)
 		goto out;
 
+	/*
+	 * Some processors cannot always support single range for more than
+	 * 4KB - refer errata TGL052, ADL037 and RPL017. Future processors might
+	 * also be affected, so for now rather than trying to keep track of
+	 * which ones, just disable it for all.
+	 */
+	if (nr_pages > 1)
+		goto out;
+
 	buf->single = true;
 	buf->nr_pages = nr_pages;
 	ret = 0;

arch/x86/include/asm/intel-family.h

@@ -105,10 +105,15 @@
 
 #define INTEL_FAM6_SAPPHIRERAPIDS_X	0x8F	/* Golden Cove */
 
+#define INTEL_FAM6_EMERALDRAPIDS_X	0xCF
+
+#define INTEL_FAM6_GRANITERAPIDS_X	0xAD
+#define INTEL_FAM6_GRANITERAPIDS_D	0xAE
+
 #define INTEL_FAM6_ALDERLAKE		0x97	/* Golden Cove / Gracemont */
 #define INTEL_FAM6_ALDERLAKE_L		0x9A	/* Golden Cove / Gracemont */
 
-/* "Small Core" Processors (Atom) */
+/* "Small Core" Processors (Atom/E-Core) */
 
 #define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
 #define INTEL_FAM6_ATOM_BONNELL_MID	0x26 /* Silverthorne, Lincroft */
@@ -135,6 +140,10 @@
 #define INTEL_FAM6_ATOM_TREMONT		0x96 /* Elkhart Lake */
 #define INTEL_FAM6_ATOM_TREMONT_L	0x9C /* Jasper Lake */
 
+#define INTEL_FAM6_SIERRAFOREST_X	0xAF
+
+#define INTEL_FAM6_GRANDRIDGE		0xB6
+
 /* Xeon Phi */
 
 #define INTEL_FAM6_XEON_PHI_KNL		0x57 /* Knights Landing */

arch/x86/kvm/x86.c

@@ -1347,20 +1347,10 @@ static const u32 msrs_to_save_all[] = {
 	MSR_ARCH_PERFMON_PERFCTR0 + 2, MSR_ARCH_PERFMON_PERFCTR0 + 3,
 	MSR_ARCH_PERFMON_PERFCTR0 + 4, MSR_ARCH_PERFMON_PERFCTR0 + 5,
 	MSR_ARCH_PERFMON_PERFCTR0 + 6, MSR_ARCH_PERFMON_PERFCTR0 + 7,
-	MSR_ARCH_PERFMON_PERFCTR0 + 8, MSR_ARCH_PERFMON_PERFCTR0 + 9,
-	MSR_ARCH_PERFMON_PERFCTR0 + 10, MSR_ARCH_PERFMON_PERFCTR0 + 11,
-	MSR_ARCH_PERFMON_PERFCTR0 + 12, MSR_ARCH_PERFMON_PERFCTR0 + 13,
-	MSR_ARCH_PERFMON_PERFCTR0 + 14, MSR_ARCH_PERFMON_PERFCTR0 + 15,
-	MSR_ARCH_PERFMON_PERFCTR0 + 16, MSR_ARCH_PERFMON_PERFCTR0 + 17,
 	MSR_ARCH_PERFMON_EVENTSEL0, MSR_ARCH_PERFMON_EVENTSEL1,
 	MSR_ARCH_PERFMON_EVENTSEL0 + 2, MSR_ARCH_PERFMON_EVENTSEL0 + 3,
 	MSR_ARCH_PERFMON_EVENTSEL0 + 4, MSR_ARCH_PERFMON_EVENTSEL0 + 5,
 	MSR_ARCH_PERFMON_EVENTSEL0 + 6, MSR_ARCH_PERFMON_EVENTSEL0 + 7,
-	MSR_ARCH_PERFMON_EVENTSEL0 + 8, MSR_ARCH_PERFMON_EVENTSEL0 + 9,
-	MSR_ARCH_PERFMON_EVENTSEL0 + 10, MSR_ARCH_PERFMON_EVENTSEL0 + 11,
-	MSR_ARCH_PERFMON_EVENTSEL0 + 12, MSR_ARCH_PERFMON_EVENTSEL0 + 13,
-	MSR_ARCH_PERFMON_EVENTSEL0 + 14, MSR_ARCH_PERFMON_EVENTSEL0 + 15,
-	MSR_ARCH_PERFMON_EVENTSEL0 + 16, MSR_ARCH_PERFMON_EVENTSEL0 + 17,
 
 	MSR_K7_EVNTSEL0, MSR_K7_EVNTSEL1, MSR_K7_EVNTSEL2, MSR_K7_EVNTSEL3,
 	MSR_K7_PERFCTR0, MSR_K7_PERFCTR1, MSR_K7_PERFCTR2, MSR_K7_PERFCTR3,
@@ -6449,12 +6439,12 @@ static void kvm_init_msr_list(void)
 				intel_pt_validate_hw_cap(PT_CAP_num_address_ranges) * 2)
 				continue;
 			break;
-		case MSR_ARCH_PERFMON_PERFCTR0 ... MSR_ARCH_PERFMON_PERFCTR0 + 17:
+		case MSR_ARCH_PERFMON_PERFCTR0 ... MSR_ARCH_PERFMON_PERFCTR0 + 7:
 			if (msrs_to_save_all[i] - MSR_ARCH_PERFMON_PERFCTR0 >=
 			    min(INTEL_PMC_MAX_GENERIC, x86_pmu.num_counters_gp))
 				continue;
 			break;
-		case MSR_ARCH_PERFMON_EVENTSEL0 ... MSR_ARCH_PERFMON_EVENTSEL0 + 17:
+		case MSR_ARCH_PERFMON_EVENTSEL0 ... MSR_ARCH_PERFMON_EVENTSEL0 + 7:
 			if (msrs_to_save_all[i] - MSR_ARCH_PERFMON_EVENTSEL0 >=
 			    min(INTEL_PMC_MAX_GENERIC, x86_pmu.num_counters_gp))
 				continue;

block/sed-opal.c

@@ -88,8 +88,8 @@ struct opal_dev {
 	u64 lowest_lba;
 
 	size_t pos;
-	u8 cmd[IO_BUFFER_LENGTH];
+	u8 *cmd;
-	u8 resp[IO_BUFFER_LENGTH];
+	u8 *resp;
 
 	struct parsed_resp parsed;
 	size_t prev_d_len;
@@ -2134,6 +2134,8 @@ void free_opal_dev(struct opal_dev *dev)
 		return;
 
 	clean_opal_dev(dev);
+	kfree(dev->resp);
+	kfree(dev->cmd);
 	kfree(dev);
 }
 EXPORT_SYMBOL(free_opal_dev);
@@ -2146,17 +2148,39 @@ struct opal_dev *init_opal_dev(void *data, sec_send_recv *send_recv)
 	if (!dev)
 		return NULL;
 
+	/*
+	 * Presumably DMA-able buffers must be cache-aligned. Kmalloc makes
+	 * sure the allocated buffer is DMA-safe in that regard.
+	 */
+	dev->cmd = kmalloc(IO_BUFFER_LENGTH, GFP_KERNEL);
+	if (!dev->cmd)
+		goto err_free_dev;
+
+	dev->resp = kmalloc(IO_BUFFER_LENGTH, GFP_KERNEL);
+	if (!dev->resp)
+		goto err_free_cmd;
+
 	INIT_LIST_HEAD(&dev->unlk_lst);
 	mutex_init(&dev->dev_lock);
 	dev->data = data;
 	dev->send_recv = send_recv;
 	if (check_opal_support(dev) != 0) {
 		pr_debug("Opal is not supported on this device\n");
-		kfree(dev);
+		goto err_free_resp;
-		return NULL;
 	}
 
 	return dev;
+
+err_free_resp:
+	kfree(dev->resp);
+
+err_free_cmd:
+	kfree(dev->cmd);
+
+err_free_dev:
+	kfree(dev);
+
+	return NULL;
 }
 EXPORT_SYMBOL(init_opal_dev);
 

drivers/accessibility/speakup/main.c

@@ -1778,7 +1778,7 @@ static void speakup_con_update(struct vc_data *vc)
 {
 	unsigned long flags;
 
-	if (!speakup_console[vc->vc_num] || spk_parked)
+	if (!speakup_console[vc->vc_num] || spk_parked || !synth)
 		return;
 	if (!spin_trylock_irqsave(&speakup_info.spinlock, flags))
 		/* Speakup output, discard */

drivers/acpi/scan.c

@@ -793,6 +793,7 @@ static bool acpi_info_matches_ids(struct acpi_device_info *info,
 static const char * const acpi_ignore_dep_ids[] = {
 	"PNP0D80", /* Windows-compatible System Power Management Controller */
 	"INT33BD", /* Intel Baytrail Mailbox Device */
+	"LATT2021", /* Lattice FW Update Client Driver */
 	NULL
 };
 

drivers/acpi/x86/utils.c

@@ -210,6 +210,12 @@ static const struct dmi_system_id force_storage_d3_dmi[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14 7425 2-in-1"),
 		}
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 16 5625"),
+		}
+	},
 	{}
 };
 

drivers/ata/libata-transport.c

@@ -301,7 +301,9 @@ int ata_tport_add(struct device *parent,
 	pm_runtime_enable(dev);
 	pm_runtime_forbid(dev);
 
-	transport_add_device(dev);
+	error = transport_add_device(dev);
+	if (error)
+		goto tport_transport_add_err;
 	transport_configure_device(dev);
 
 	error = ata_tlink_add(&ap->link);
@@ -312,12 +314,12 @@ int ata_tport_add(struct device *parent,
 
  tport_link_err:
 	transport_remove_device(dev);
+ tport_transport_add_err:
 	device_del(dev);
 
  tport_err:
 	transport_destroy_device(dev);
 	put_device(dev);
-	ata_host_put(ap->host);
 	return error;
 }
 
@@ -426,7 +428,9 @@ int ata_tlink_add(struct ata_link *link)
 		goto tlink_err;
 	}
 
-	transport_add_device(dev);
+	error = transport_add_device(dev);
+	if (error)
+		goto tlink_transport_err;
 	transport_configure_device(dev);
 
 	ata_for_each_dev(ata_dev, link, ALL) {
@@ -441,6 +445,7 @@ int ata_tlink_add(struct ata_link *link)
 		ata_tdev_delete(ata_dev);
 	}
 	transport_remove_device(dev);
+  tlink_transport_err:
 	device_del(dev);
   tlink_err:
 	transport_destroy_device(dev);
@@ -678,7 +683,13 @@ static int ata_tdev_add(struct ata_device *ata_dev)
 		return error;
 	}
 
-	transport_add_device(dev);
+	error = transport_add_device(dev);
+	if (error) {
+		device_del(dev);
+		ata_tdev_free(ata_dev);
+		return error;
+	}
+
 	transport_configure_device(dev);
 	return 0;
 }

drivers/block/drbd/drbd_main.c

@@ -2699,7 +2699,7 @@ static int init_submitter(struct drbd_device *device)
 enum drbd_ret_code drbd_create_device(struct drbd_config_context *adm_ctx, unsigned int minor)
 {
 	struct drbd_resource *resource = adm_ctx->resource;
-	struct drbd_connection *connection;
+	struct drbd_connection *connection, *n;
 	struct drbd_device *device;
 	struct drbd_peer_device *peer_device, *tmp_peer_device;
 	struct gendisk *disk;
@@ -2815,7 +2815,7 @@ enum drbd_ret_code drbd_create_device(struct drbd_config_context *adm_ctx, unsig
 	return NO_ERROR;
 
 out_idr_remove_from_resource:
-	for_each_connection(connection, resource) {
+	for_each_connection_safe(connection, n, resource) {
 		peer_device = idr_remove(&connection->peer_devices, vnr);
 		if (peer_device)
 			kref_put(&connection->kref, drbd_destroy_connection);

drivers/firmware/arm_scmi/bus.c

@@ -216,9 +216,20 @@ void scmi_device_destroy(struct scmi_device *scmi_dev)
 	device_unregister(&scmi_dev->dev);
 }
 
+void scmi_device_link_add(struct device *consumer, struct device *supplier)
+{
+	struct device_link *link;
+
+	link = device_link_add(consumer, supplier, DL_FLAG_AUTOREMOVE_CONSUMER);
+
+	WARN_ON(!link);
+}
+
 void scmi_set_handle(struct scmi_device *scmi_dev)
 {
 	scmi_dev->handle = scmi_handle_get(&scmi_dev->dev);
+	if (scmi_dev->handle)
+		scmi_device_link_add(&scmi_dev->dev, scmi_dev->handle->dev);
 }
 
 int scmi_protocol_register(const struct scmi_protocol *proto)

drivers/firmware/arm_scmi/common.h

@@ -272,6 +272,7 @@ struct scmi_xfer_ops {
 struct scmi_revision_info *
 scmi_revision_area_get(const struct scmi_protocol_handle *ph);
 int scmi_handle_put(const struct scmi_handle *handle);
+void scmi_device_link_add(struct device *consumer, struct device *supplier);
 struct scmi_handle *scmi_handle_get(struct device *dev);
 void scmi_set_handle(struct scmi_device *scmi_dev);
 void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph,

drivers/firmware/arm_scmi/driver.c

@@ -1731,10 +1731,16 @@ int scmi_protocol_device_request(const struct scmi_device_id *id_table)
 			sdev = scmi_get_protocol_device(child, info,
 							id_table->protocol_id,
 							id_table->name);
+			if (sdev) {
 				/* Set handle if not already set: device existed */
-			if (sdev && !sdev->handle)
+				if (!sdev->handle)
 					sdev->handle =
 						scmi_handle_get_from_info_unlocked(info);
+				/* Relink consumer and suppliers */
+				if (sdev->handle)
+					scmi_device_link_add(&sdev->dev,
+							     sdev->handle->dev);
+			}
 		} else {
 			dev_err(info->dev,
 				"Failed. SCMI protocol %d not active.\n",
@@ -1920,20 +1926,17 @@ void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
 
 static int scmi_remove(struct platform_device *pdev)
 {
-	int ret = 0, id;
+	int ret, id;
 	struct scmi_info *info = platform_get_drvdata(pdev);
 	struct device_node *child;
 
 	mutex_lock(&scmi_list_mutex);
 	if (info->users)
-		ret = -EBUSY;
+		dev_warn(&pdev->dev,
-	else
+			 "Still active SCMI users will be forcibly unbound.\n");
 	list_del(&info->node);
 	mutex_unlock(&scmi_list_mutex);
 
-	if (ret)
-		return ret;
-
 	scmi_notification_exit(&info->handle);
 
 	mutex_lock(&info->protocols_mtx);
@@ -1945,7 +1948,11 @@ static int scmi_remove(struct platform_device *pdev)
 	idr_destroy(&info->active_protocols);
 
 	/* Safe to free channels since no more users */
-	return scmi_cleanup_txrx_channels(info);
+	ret = scmi_cleanup_txrx_channels(info);
+	if (ret)
+		dev_warn(&pdev->dev, "Failed to cleanup SCMI channels.\n");
+
+	return 0;
 }
 
 static ssize_t protocol_version_show(struct device *dev,

drivers/firmware/google/coreboot_table.c

@@ -149,12 +149,8 @@ static int coreboot_table_probe(struct platform_device *pdev)
 	if (!ptr)
 		return -ENOMEM;
 
-	ret = bus_register(&coreboot_bus_type);
-	if (!ret) {
 	ret = coreboot_table_populate(dev, ptr);
-		if (ret)
+
-			bus_unregister(&coreboot_bus_type);
-	}
 	memunmap(ptr);
 
 	return ret;
@@ -169,7 +165,6 @@ static int __cb_dev_unregister(struct device *dev, void *dummy)
 static int coreboot_table_remove(struct platform_device *pdev)
 {
 	bus_for_each_dev(&coreboot_bus_type, NULL, NULL, __cb_dev_unregister);
-	bus_unregister(&coreboot_bus_type);
 	return 0;
 }
 
@@ -199,6 +194,32 @@ static struct platform_driver coreboot_table_driver = {
 		.of_match_table = of_match_ptr(coreboot_of_match),
 	},
 };
-module_platform_driver(coreboot_table_driver);
+
+static int __init coreboot_table_driver_init(void)
+{
+	int ret;
+
+	ret = bus_register(&coreboot_bus_type);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&coreboot_table_driver);
+	if (ret) {
+		bus_unregister(&coreboot_bus_type);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit coreboot_table_driver_exit(void)
+{
+	platform_driver_unregister(&coreboot_table_driver);
+	bus_unregister(&coreboot_bus_type);
+}
+
+module_init(coreboot_table_driver_init);
+module_exit(coreboot_table_driver_exit);
+
 MODULE_AUTHOR("Google, Inc.");
 MODULE_LICENSE("GPL");

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c

@@ -1765,7 +1765,7 @@ void dcn20_post_unlock_program_front_end(
 
 			for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000
 					&& hubp->funcs->hubp_is_flip_pending(hubp); j++)
-				mdelay(1);
+				udelay(1);
 		}
 	}
 

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubp.c

@@ -79,6 +79,7 @@ static struct hubp_funcs dcn31_hubp_funcs = {
 	.hubp_init = hubp3_init,
 	.set_unbounded_requesting = hubp31_set_unbounded_requesting,
 	.hubp_soft_reset = hubp31_soft_reset,
+	.hubp_set_flip_int = hubp1_set_flip_int,
 	.hubp_in_blank = hubp1_in_blank,
 };
 

drivers/gpu/drm/drm_drv.c

@@ -614,7 +614,7 @@ static int drm_dev_init(struct drm_device *dev,
 	mutex_init(&dev->clientlist_mutex);
 	mutex_init(&dev->master_mutex);
 
-	ret = drmm_add_action(dev, drm_dev_init_release, NULL);
+	ret = drmm_add_action_or_reset(dev, drm_dev_init_release, NULL);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/drm_internal.h

@@ -104,6 +104,7 @@ static inline void drm_vblank_flush_worker(struct drm_vblank_crtc *vblank)
 
 static inline void drm_vblank_destroy_worker(struct drm_vblank_crtc *vblank)
 {
+	if (vblank->worker)
 		kthread_destroy_worker(vblank->worker);
 }
 

drivers/gpu/drm/imx/imx-tve.c

@@ -217,7 +217,8 @@ static int imx_tve_connector_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-static int imx_tve_connector_mode_valid(struct drm_connector *connector,
+static enum drm_mode_status
+imx_tve_connector_mode_valid(struct drm_connector *connector,
 			     struct drm_display_mode *mode)
 {
 	struct imx_tve *tve = con_to_tve(connector);

drivers/gpu/drm/panel/panel-simple.c

@@ -3090,6 +3090,7 @@ static const struct display_timing logictechno_lt161010_2nh_timing = {
 static const struct panel_desc logictechno_lt161010_2nh = {
 	.timings = &logictechno_lt161010_2nh_timing,
 	.num_timings = 1,
+	.bpc = 6,
 	.size = {
 		.width = 154,
 		.height = 86,
@@ -3119,6 +3120,7 @@ static const struct display_timing logictechno_lt170410_2whc_timing = {
 static const struct panel_desc logictechno_lt170410_2whc = {
 	.timings = &logictechno_lt170410_2whc_timing,
 	.num_timings = 1,
+	.bpc = 8,
 	.size = {
 		.width = 217,
 		.height = 136,

drivers/gpu/drm/vc4/vc4_kms.c

@@ -193,8 +193,8 @@ vc4_hvs_get_new_global_state(struct drm_atomic_state *state)
 	struct drm_private_state *priv_state;
 
 	priv_state = drm_atomic_get_new_private_obj_state(state, &vc4->hvs_channels);
-	if (IS_ERR(priv_state))
+	if (!priv_state)
-		return ERR_CAST(priv_state);
+		return ERR_PTR(-EINVAL);
 
 	return to_vc4_hvs_state(priv_state);
 }
@@ -206,8 +206,8 @@ vc4_hvs_get_old_global_state(struct drm_atomic_state *state)
 	struct drm_private_state *priv_state;
 
 	priv_state = drm_atomic_get_old_private_obj_state(state, &vc4->hvs_channels);
-	if (IS_ERR(priv_state))
+	if (!priv_state)
-		return ERR_CAST(priv_state);
+		return ERR_PTR(-EINVAL);
 
 	return to_vc4_hvs_state(priv_state);
 }

drivers/i2c/busses/i2c-i801.c

@@ -1242,6 +1242,7 @@ static const struct {
 	 */
 	{ "Latitude 5480",      0x29 },
 	{ "Vostro V131",        0x1d },
+	{ "Vostro 5568",        0x29 },
 };
 
 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)

drivers/i2c/busses/i2c-tegra.c

@@ -283,6 +283,7 @@ struct tegra_i2c_dev {
 	struct dma_chan *tx_dma_chan;
 	struct dma_chan *rx_dma_chan;
 	unsigned int dma_buf_size;
+	struct device *dma_dev;
 	dma_addr_t dma_phys;
 	void *dma_buf;
 
@@ -419,7 +420,7 @@ static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
 static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev)
 {
 	if (i2c_dev->dma_buf) {
-		dma_free_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
+		dma_free_coherent(i2c_dev->dma_dev, i2c_dev->dma_buf_size,
 				  i2c_dev->dma_buf, i2c_dev->dma_phys);
 		i2c_dev->dma_buf = NULL;
 	}
@@ -466,10 +467,13 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 
 	i2c_dev->tx_dma_chan = chan;
 
+	WARN_ON(i2c_dev->tx_dma_chan->device != i2c_dev->rx_dma_chan->device);
+	i2c_dev->dma_dev = chan->device->dev;
+
 	i2c_dev->dma_buf_size = i2c_dev->hw->quirks->max_write_len +
 				I2C_PACKET_HEADER_SIZE;
 
-	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
+	dma_buf = dma_alloc_coherent(i2c_dev->dma_dev, i2c_dev->dma_buf_size,
 				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
 	if (!dma_buf) {
 		dev_err(i2c_dev->dev, "failed to allocate DMA buffer\n");
@@ -1255,7 +1259,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
 	if (i2c_dev->dma_mode) {
 		if (i2c_dev->msg_read) {
-			dma_sync_single_for_device(i2c_dev->dev,
+			dma_sync_single_for_device(i2c_dev->dma_dev,
 						   i2c_dev->dma_phys,
 						   xfer_size, DMA_FROM_DEVICE);
 
@@ -1263,7 +1267,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			if (err)
 				return err;
 		} else {
-			dma_sync_single_for_cpu(i2c_dev->dev,
+			dma_sync_single_for_cpu(i2c_dev->dma_dev,
 						i2c_dev->dma_phys,
 						xfer_size, DMA_TO_DEVICE);
 		}
@@ -1276,7 +1280,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
 			       msg->buf, msg->len);
 
-			dma_sync_single_for_device(i2c_dev->dev,
+			dma_sync_single_for_device(i2c_dev->dma_dev,
 						   i2c_dev->dma_phys,
 						   xfer_size, DMA_TO_DEVICE);
 
@@ -1327,7 +1331,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		}
 
 		if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) {
-			dma_sync_single_for_cpu(i2c_dev->dev,
+			dma_sync_single_for_cpu(i2c_dev->dma_dev,
 						i2c_dev->dma_phys,
 						xfer_size, DMA_FROM_DEVICE);
 

drivers/iio/adc/at91_adc.c

@@ -634,8 +634,10 @@ static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *idev,
 	trig->ops = &at91_adc_trigger_ops;
 
 	ret = iio_trigger_register(trig);
-	if (ret)
+	if (ret) {
+		iio_trigger_free(trig);
 		return NULL;
+	}
 
 	return trig;
 }

drivers/iio/adc/mp2629_adc.c

@@ -56,7 +56,8 @@ static struct iio_map mp2629_adc_maps[] = {
 	MP2629_MAP(SYSTEM_VOLT, "system-volt"),
 	MP2629_MAP(INPUT_VOLT, "input-volt"),
 	MP2629_MAP(BATT_CURRENT, "batt-current"),
-	MP2629_MAP(INPUT_CURRENT, "input-current")
+	MP2629_MAP(INPUT_CURRENT, "input-current"),
+	{ }
 };
 
 static int mp2629_read_raw(struct iio_dev *indio_dev,
@@ -73,7 +74,7 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 
-		if (chan->address == MP2629_INPUT_VOLT)
+		if (chan->channel == MP2629_INPUT_VOLT)
 			rval &= GENMASK(6, 0);
 		*val = rval;
 		return IIO_VAL_INT;

drivers/iio/pressure/ms5611_spi.c

@@ -94,7 +94,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, indio_dev);
 
 	spi->mode = SPI_MODE_0;
-	spi->max_speed_hz = 20000000;
+	spi->max_speed_hz = min(spi->max_speed_hz, 20000000U);
 	spi->bits_per_word = 8;
 	ret = spi_setup(spi);
 	if (ret < 0)

drivers/iio/trigger/iio-trig-sysfs.c

@@ -208,9 +208,13 @@ static int iio_sysfs_trigger_remove(int id)
 
 static int __init iio_sysfs_trig_init(void)
 {
+	int ret;
 	device_initialize(&iio_sysfs_trig_dev);
 	dev_set_name(&iio_sysfs_trig_dev, "iio_sysfs_trigger");
-	return device_add(&iio_sysfs_trig_dev);
+	ret = device_add(&iio_sysfs_trig_dev);
+	if (ret)
+		put_device(&iio_sysfs_trig_dev);
+	return ret;
 }
 module_init(iio_sysfs_trig_init);
 

drivers/infiniband/hw/efa/efa_main.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
 /*
- * Copyright 2018-2021 Amazon.com, Inc. or its affiliates. All rights reserved.
+ * Copyright 2018-2022 Amazon.com, Inc. or its affiliates. All rights reserved.
  */
 
 #include <linux/module.h>
@@ -14,10 +14,12 @@
 
 #define PCI_DEV_ID_EFA0_VF 0xefa0
 #define PCI_DEV_ID_EFA1_VF 0xefa1
+#define PCI_DEV_ID_EFA2_VF 0xefa2
 
 static const struct pci_device_id efa_pci_tbl[] = {
 	{ PCI_VDEVICE(AMAZON, PCI_DEV_ID_EFA0_VF) },
 	{ PCI_VDEVICE(AMAZON, PCI_DEV_ID_EFA1_VF) },
+	{ PCI_VDEVICE(AMAZON, PCI_DEV_ID_EFA2_VF) },
 	{ }
 };
 

drivers/input/joystick/iforce/iforce-main.c

@@ -273,22 +273,22 @@ int iforce_init_device(struct device *parent, u16 bustype,
  * Get device info.
  */
 
-	if (!iforce_get_id_packet(iforce, 'M', buf, &len) || len < 3)
+	if (!iforce_get_id_packet(iforce, 'M', buf, &len) && len >= 3)
 		input_dev->id.vendor = get_unaligned_le16(buf + 1);
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet M\n");
 
-	if (!iforce_get_id_packet(iforce, 'P', buf, &len) || len < 3)
+	if (!iforce_get_id_packet(iforce, 'P', buf, &len) && len >= 3)
 		input_dev->id.product = get_unaligned_le16(buf + 1);
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet P\n");
 
-	if (!iforce_get_id_packet(iforce, 'B', buf, &len) || len < 3)
+	if (!iforce_get_id_packet(iforce, 'B', buf, &len) && len >= 3)
 		iforce->device_memory.end = get_unaligned_le16(buf + 1);
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet B\n");
 
-	if (!iforce_get_id_packet(iforce, 'N', buf, &len) || len < 2)
+	if (!iforce_get_id_packet(iforce, 'N', buf, &len) && len >= 2)
 		ff_effects = buf[1];
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet N\n");

drivers/input/serio/i8042.c

@@ -1543,8 +1543,6 @@ static int i8042_probe(struct platform_device *dev)
 {
 	int error;
 
-	i8042_platform_device = dev;
-
 	if (i8042_reset == I8042_RESET_ALWAYS) {
 		error = i8042_controller_selftest();
 		if (error)
@@ -1582,7 +1580,6 @@ static int i8042_probe(struct platform_device *dev)
 	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
 	i8042_free_irqs();
 	i8042_controller_reset(false);
-	i8042_platform_device = NULL;
 
 	return error;
 }
@@ -1592,7 +1589,6 @@ static int i8042_remove(struct platform_device *dev)
 	i8042_unregister_ports();
 	i8042_free_irqs();
 	i8042_controller_reset(false);
-	i8042_platform_device = NULL;
 
 	return 0;
 }

drivers/iommu/intel/iommu.c

@@ -1048,11 +1048,9 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 
 			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
 			pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
-			if (domain_use_first_level(domain)) {
+			if (domain_use_first_level(domain))
-				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
+				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US | DMA_FL_PTE_ACCESS;
-				if (iommu_is_dma_domain(&domain->domain))
+
-					pteval |= DMA_FL_PTE_ACCESS;
-			}
 			if (cmpxchg64(&pte->val, 0ULL, pteval))
 				/* Someone else set it while we were thinking; use theirs. */
 				free_pgtable_page(tmp_page);

drivers/iommu/intel/pasid.c

@@ -717,7 +717,7 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
 	 * Since it is a second level only translation setup, we should
 	 * set SRE bit as well (addresses are expected to be GPAs).
 	 */
-	if (pasid != PASID_RID2PASID)
+	if (pasid != PASID_RID2PASID && ecap_srs(iommu->ecap))
 		pasid_set_sre(pte);
 	pasid_set_present(pte);
 	pasid_flush_caches(iommu, pte, pasid, did);
@@ -756,6 +756,7 @@ int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
 	 * We should set SRE bit as well since the addresses are expected
 	 * to be GPAs.
 	 */
+	if (ecap_srs(iommu->ecap))
 		pasid_set_sre(pte);
 	pasid_set_present(pte);
 	pasid_flush_caches(iommu, pte, pasid, did);

drivers/isdn/mISDN/core.c

@@ -222,7 +222,7 @@ mISDN_register_device(struct mISDNdevice *dev,
 
 	err = get_free_devid();
 	if (err < 0)
-		goto error1;
+		return err;
 	dev->id = err;
 
 	device_initialize(&dev->dev);

drivers/isdn/mISDN/dsp_pipeline.c

@@ -77,6 +77,7 @@ int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
 	if (!entry)
 		return -ENOMEM;
 
+	INIT_LIST_HEAD(&entry->list);
 	entry->elem = elem;
 
 	entry->dev.class = elements_class;
@@ -107,7 +108,7 @@ err2:
 	device_unregister(&entry->dev);
 	return ret;
 err1:
-	kfree(entry);
+	put_device(&entry->dev);
 	return ret;
 }
 EXPORT_SYMBOL(mISDN_dsp_element_register);

drivers/md/dm-ioctl.c

@@ -655,7 +655,7 @@ static void list_version_get_needed(struct target_type *tt, void *needed_param)
     size_t *needed = needed_param;
 
     *needed += sizeof(struct dm_target_versions);
-    *needed += strlen(tt->name);
+    *needed += strlen(tt->name) + 1;
     *needed += ALIGN_MASK;
 }
 
@@ -720,7 +720,7 @@ static int __list_versions(struct dm_ioctl *param, size_t param_size, const char
 	iter_info.old_vers = NULL;
 	iter_info.vers = vers;
 	iter_info.flags = 0;
-	iter_info.end = (char *)vers+len;
+	iter_info.end = (char *)vers + needed;
 
 	/*
 	 * Now loop through filling out the names & versions.

drivers/mfd/lpc_ich.c

@@ -63,6 +63,8 @@
 #define SPIBASE_BYT		0x54
 #define SPIBASE_BYT_SZ		512
 #define SPIBASE_BYT_EN		BIT(1)
+#define BYT_BCR			0xfc
+#define BYT_BCR_WPD		BIT(0)
 
 #define SPIBASE_LPT		0x3800
 #define SPIBASE_LPT_SZ		512
@@ -1084,12 +1086,57 @@ wdt_done:
 	return ret;
 }
 
+static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
+{
+	u32 val;
+
+	val = readl(base + BYT_BCR);
+	if (!(val & BYT_BCR_WPD)) {
+		val |= BYT_BCR_WPD;
+		writel(val, base + BYT_BCR);
+		val = readl(base + BYT_BCR);
+	}
+
+	return val & BYT_BCR_WPD;
+}
+
+static bool lpc_ich_lpt_set_writeable(void __iomem *base, void *data)
+{
+	struct pci_dev *pdev = data;
+	u32 bcr;
+
+	pci_read_config_dword(pdev, BCR, &bcr);
+	if (!(bcr & BCR_WPD)) {
+		bcr |= BCR_WPD;
+		pci_write_config_dword(pdev, BCR, bcr);
+		pci_read_config_dword(pdev, BCR, &bcr);
+	}
+
+	return bcr & BCR_WPD;
+}
+
+static bool lpc_ich_bxt_set_writeable(void __iomem *base, void *data)
+{
+	unsigned int spi = PCI_DEVFN(13, 2);
+	struct pci_bus *bus = data;
+	u32 bcr;
+
+	pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+	if (!(bcr & BCR_WPD)) {
+		bcr |= BCR_WPD;
+		pci_bus_write_config_dword(bus, spi, BCR, bcr);
+		pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+	}
+
+	return bcr & BCR_WPD;
+}
+
 static int lpc_ich_init_spi(struct pci_dev *dev)
 {
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	struct resource *res = &intel_spi_res[0];
 	struct intel_spi_boardinfo *info;
-	u32 spi_base, rcba, bcr;
+	u32 spi_base, rcba;
 
 	info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
@@ -1103,6 +1150,8 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
 		if (spi_base & SPIBASE_BYT_EN) {
 			res->start = spi_base & ~(SPIBASE_BYT_SZ - 1);
 			res->end = res->start + SPIBASE_BYT_SZ - 1;
+
+			info->set_writeable = lpc_ich_byt_set_writeable;
 		}
 		break;
 
@@ -1113,8 +1162,8 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
 			res->start = spi_base + SPIBASE_LPT;
 			res->end = res->start + SPIBASE_LPT_SZ - 1;
 
-			pci_read_config_dword(dev, BCR, &bcr);
+			info->set_writeable = lpc_ich_lpt_set_writeable;
-			info->writeable = !!(bcr & BCR_WPD);
+			info->data = dev;
 		}
 		break;
 
@@ -1135,8 +1184,8 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
 			res->start = spi_base & 0xfffffff0;
 			res->end = res->start + SPIBASE_APL_SZ - 1;
 
-			pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+			info->set_writeable = lpc_ich_bxt_set_writeable;
-			info->writeable = !!(bcr & BCR_WPD);
+			info->data = bus;
 		}
 
 		pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1);

drivers/misc/vmw_vmci/vmci_queue_pair.c

@@ -854,6 +854,7 @@ static int qp_notify_peer_local(bool attach, struct vmci_handle handle)
 	u32 context_id = vmci_get_context_id();
 	struct vmci_event_qp ev;
 
+	memset(&ev, 0, sizeof(ev));
 	ev.msg.hdr.dst = vmci_make_handle(context_id, VMCI_EVENT_HANDLER);
 	ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
 					  VMCI_CONTEXT_RESOURCE_ID);
@@ -1467,6 +1468,7 @@ static int qp_notify_peer(bool attach,
 	 * kernel.
 	 */
 
+	memset(&ev, 0, sizeof(ev));
 	ev.msg.hdr.dst = vmci_make_handle(peer_id, VMCI_EVENT_HANDLER);
 	ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
 					  VMCI_CONTEXT_RESOURCE_ID);

drivers/mmc/core/core.c

@@ -1139,7 +1139,13 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		mmc_power_cycle(host, ocr);
 	} else {
 		bit = fls(ocr) - 1;
-		ocr &= 3 << bit;
+		/*
+		 * The bit variable represents the highest voltage bit set in
+		 * the OCR register.
+		 * To keep a range of 2 values (e.g. 3.2V/3.3V and 3.3V/3.4V),
+		 * we must shift the mask '3' with (bit - 1).
+		 */
+		ocr &= 3 << (bit - 1);
 		if (bit != host->ios.vdd)
 			dev_warn(mmc_dev(host), "exceeding card's volts\n");
 	}

drivers/mmc/host/sdhci-pci-core.c

@@ -1818,6 +1818,8 @@ static int amd_probe(struct sdhci_pci_chip *chip)
 		}
 	}
 
+	pci_dev_put(smbus_dev);
+
 	if (gen == AMD_CHIPSET_BEFORE_ML || gen == AMD_CHIPSET_CZ)
 		chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
 

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -31,6 +31,7 @@
 #define O2_SD_CAPS		0xE0
 #define O2_SD_ADMA1		0xE2
 #define O2_SD_ADMA2		0xE7
+#define O2_SD_MISC_CTRL2	0xF0
 #define O2_SD_INF_MOD		0xF1
 #define O2_SD_MISC_CTRL4	0xFC
 #define O2_SD_MISC_CTRL		0x1C0
@@ -830,6 +831,12 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 		/* Set Tuning Windows to 5 */
 		pci_write_config_byte(chip->pdev,
 				O2_SD_TUNING_CTRL, 0x55);
+		//Adjust 1st and 2nd CD debounce time
+		pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
+		scratch_32 &= 0xFFE7FFFF;
+		scratch_32 |= 0x00180000;
+		pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
+		pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 					   O2_SD_LOCK_WP, &scratch);

drivers/mtd/spi-nor/controllers/intel-spi-pci.c

@@ -16,12 +16,30 @@
 #define BCR		0xdc
 #define BCR_WPD		BIT(0)
 
+static bool intel_spi_pci_set_writeable(void __iomem *base, void *data)
+{
+	struct pci_dev *pdev = data;
+	u32 bcr;
+
+	/* Try to make the chip read/write */
+	pci_read_config_dword(pdev, BCR, &bcr);
+	if (!(bcr & BCR_WPD)) {
+		bcr |= BCR_WPD;
+		pci_write_config_dword(pdev, BCR, bcr);
+		pci_read_config_dword(pdev, BCR, &bcr);
+	}
+
+	return bcr & BCR_WPD;
+}
+
 static const struct intel_spi_boardinfo bxt_info = {
 	.type = INTEL_SPI_BXT,
+	.set_writeable = intel_spi_pci_set_writeable,
 };
 
 static const struct intel_spi_boardinfo cnl_info = {
 	.type = INTEL_SPI_CNL,
+	.set_writeable = intel_spi_pci_set_writeable,
 };
 
 static int intel_spi_pci_probe(struct pci_dev *pdev,
@@ -29,7 +47,6 @@ static int intel_spi_pci_probe(struct pci_dev *pdev,
 {
 	struct intel_spi_boardinfo *info;
 	struct intel_spi *ispi;
-	u32 bcr;
 	int ret;
 
 	ret = pcim_enable_device(pdev);
@@ -41,15 +58,7 @@ static int intel_spi_pci_probe(struct pci_dev *pdev,
 	if (!info)
 		return -ENOMEM;
 
-	/* Try to make the chip read/write */
+	info->data = pdev;
-	pci_read_config_dword(pdev, BCR, &bcr);
-	if (!(bcr & BCR_WPD)) {
-		bcr |= BCR_WPD;
-		pci_write_config_dword(pdev, BCR, bcr);
-		pci_read_config_dword(pdev, BCR, &bcr);
-	}
-	info->writeable = !!(bcr & BCR_WPD);
-
 	ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info);
 	if (IS_ERR(ispi))
 		return PTR_ERR(ispi);

drivers/mtd/spi-nor/controllers/intel-spi.c

@@ -52,17 +52,17 @@
 #define FRACC				0x50
 
 #define FREG(n)				(0x54 + ((n) * 4))
-#define FREG_BASE_MASK			0x3fff
+#define FREG_BASE_MASK			GENMASK(14, 0)
 #define FREG_LIMIT_SHIFT		16
-#define FREG_LIMIT_MASK			(0x03fff << FREG_LIMIT_SHIFT)
+#define FREG_LIMIT_MASK			GENMASK(30, 16)
 
 /* Offset is from @ispi->pregs */
 #define PR(n)				((n) * 4)
 #define PR_WPE				BIT(31)
 #define PR_LIMIT_SHIFT			16
-#define PR_LIMIT_MASK			(0x3fff << PR_LIMIT_SHIFT)
+#define PR_LIMIT_MASK			GENMASK(30, 16)
 #define PR_RPE				BIT(15)
-#define PR_BASE_MASK			0x3fff
+#define PR_BASE_MASK			GENMASK(14, 0)
 
 /* Offsets are from @ispi->sregs */
 #define SSFSTS_CTL			0x00
@@ -116,7 +116,7 @@
 #define ERASE_OPCODE_SHIFT		8
 #define ERASE_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
 #define ERASE_64K_OPCODE_SHIFT		16
-#define ERASE_64K_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
+#define ERASE_64K_OPCODE_MASK		(0xff << ERASE_64K_OPCODE_SHIFT)
 
 #define INTEL_SPI_TIMEOUT		5000 /* ms */
 #define INTEL_SPI_FIFO_SZ		64
@@ -131,7 +131,6 @@
  * @sregs: Start of software sequencer registers
  * @nregions: Maximum number of regions
  * @pr_num: Maximum number of protected range registers
- * @writeable: Is the chip writeable
  * @locked: Is SPI setting locked
  * @swseq_reg: Use SW sequencer in register reads/writes
  * @swseq_erase: Use SW sequencer in erase operation
@@ -149,7 +148,6 @@ struct intel_spi {
 	void __iomem *sregs;
 	size_t nregions;
 	size_t pr_num;
-	bool writeable;
 	bool locked;
 	bool swseq_reg;
 	bool swseq_erase;
@@ -304,6 +302,14 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
 				  INTEL_SPI_TIMEOUT * 1000);
 }
 
+static bool intel_spi_set_writeable(struct intel_spi *ispi)
+{
+	if (!ispi->info->set_writeable)
+		return false;
+
+	return ispi->info->set_writeable(ispi->base, ispi->info->data);
+}
+
 static int intel_spi_init(struct intel_spi *ispi)
 {
 	u32 opmenu0, opmenu1, lvscc, uvscc, val;
@@ -316,19 +322,6 @@ static int intel_spi_init(struct intel_spi *ispi)
 		ispi->nregions = BYT_FREG_NUM;
 		ispi->pr_num = BYT_PR_NUM;
 		ispi->swseq_reg = true;
-
-		if (writeable) {
-			/* Disable write protection */
-			val = readl(ispi->base + BYT_BCR);
-			if (!(val & BYT_BCR_WPD)) {
-				val |= BYT_BCR_WPD;
-				writel(val, ispi->base + BYT_BCR);
-				val = readl(ispi->base + BYT_BCR);
-			}
-
-			ispi->writeable = !!(val & BYT_BCR_WPD);
-		}
-
 		break;
 
 	case INTEL_SPI_LPT:
@@ -358,6 +351,12 @@ static int intel_spi_init(struct intel_spi *ispi)
 		return -EINVAL;
 	}
 
+	/* Try to disable write protection if user asked to do so */
+	if (writeable && !intel_spi_set_writeable(ispi)) {
+		dev_warn(ispi->dev, "can't disable chip write protection\n");
+		writeable = false;
+	}
+
 	/* Disable #SMI generation from HW sequencer */
 	val = readl(ispi->base + HSFSTS_CTL);
 	val &= ~HSFSTS_CTL_FSMIE;
@@ -884,9 +883,12 @@ static void intel_spi_fill_partition(struct intel_spi *ispi,
 		/*
 		 * If any of the regions have protection bits set, make the
 		 * whole partition read-only to be on the safe side.
+		 *
+		 * Also if the user did not ask the chip to be writeable
+		 * mask the bit too.
 		 */
-		if (intel_spi_is_protected(ispi, base, limit))
+		if (!writeable || intel_spi_is_protected(ispi, base, limit))
-			ispi->writeable = false;
+			part->mask_flags |= MTD_WRITEABLE;
 
 		end = (limit << 12) + 4096;
 		if (end > part->size)
@@ -927,7 +929,6 @@ struct intel_spi *intel_spi_probe(struct device *dev,
 
 	ispi->dev = dev;
 	ispi->info = info;
-	ispi->writeable = info->writeable;
 
 	ret = intel_spi_init(ispi);
 	if (ret)
@@ -945,10 +946,6 @@ struct intel_spi *intel_spi_probe(struct device *dev,
 
 	intel_spi_fill_partition(ispi, &part);
 
-	/* Prevent writes if not explicitly enabled */
-	if (!ispi->writeable || !writeable)
-		ispi->nor.mtd.flags &= ~MTD_WRITEABLE;
-
 	ret = mtd_device_register(&ispi->nor.mtd, &part, 1);
 	if (ret)
 		return ERR_PTR(ret);

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -4583,13 +4583,19 @@ static struct pci_driver ena_pci_driver = {
 
 static int __init ena_init(void)
 {
+	int ret;
+
 	ena_wq = create_singlethread_workqueue(DRV_MODULE_NAME);
 	if (!ena_wq) {
 		pr_err("Failed to create workqueue\n");
 		return -ENOMEM;
 	}
 
-	return pci_register_driver(&ena_pci_driver);
+	ret = pci_register_driver(&ena_pci_driver);
+	if (ret)
+		destroy_workqueue(ena_wq);
+
+	return ret;
 }
 
 static void __exit ena_cleanup(void)

drivers/net/ethernet/atheros/ag71xx.c

@@ -1480,7 +1480,7 @@ static int ag71xx_open(struct net_device *ndev)
 	if (ret) {
 		netif_err(ag, link, ndev, "phylink_of_phy_connect filed with err: %i\n",
 			  ret);
-		goto err;
+		return ret;
 	}
 
 	max_frame_len = ag71xx_max_frame_len(ndev->mtu);
@@ -1501,6 +1501,7 @@ static int ag71xx_open(struct net_device *ndev)
 
 err:
 	ag71xx_rings_cleanup(ag);
+	phylink_disconnect_phy(ag->phylink);
 	return ret;
 }
 

drivers/net/ethernet/broadcom/bgmac.c

@@ -1568,7 +1568,6 @@ void bgmac_enet_remove(struct bgmac *bgmac)
 	phy_disconnect(bgmac->net_dev->phydev);
 	netif_napi_del(&bgmac->napi);
 	bgmac_dma_free(bgmac);
-	free_netdev(bgmac->net_dev);
 }
 EXPORT_SYMBOL_GPL(bgmac_enet_remove);
 

drivers/net/ethernet/broadcom/bnxt/bnxt.c

@@ -13697,8 +13697,16 @@ static struct pci_driver bnxt_pci_driver = {
 
 static int __init bnxt_init(void)
 {
+	int err;
+
 	bnxt_debug_init();
-	return pci_register_driver(&bnxt_pci_driver);
+	err = pci_register_driver(&bnxt_pci_driver);
+	if (err) {
+		bnxt_debug_exit();
+		return err;
+	}
+
+	return 0;
 }
 
 static void __exit bnxt_exit(void)

drivers/net/ethernet/cavium/liquidio/lio_main.c

@@ -1798,13 +1798,10 @@ static int liquidio_open(struct net_device *netdev)
 
 	ifstate_set(lio, LIO_IFSTATE_RUNNING);
 
-	if (OCTEON_CN23XX_PF(oct)) {
+	if (!OCTEON_CN23XX_PF(oct) || (OCTEON_CN23XX_PF(oct) && !oct->msix_on)) {
-		if (!oct->msix_on)
+		ret = setup_tx_poll_fn(netdev);
-			if (setup_tx_poll_fn(netdev))
+		if (ret)
-				return -1;
+			goto err_poll;
-	} else {
-		if (setup_tx_poll_fn(netdev))
-			return -1;
 	}
 
 	netif_tx_start_all_queues(netdev);
@@ -1817,7 +1814,7 @@ static int liquidio_open(struct net_device *netdev)
 	/* tell Octeon to start forwarding packets to host */
 	ret = send_rx_ctrl_cmd(lio, 1);
 	if (ret)
-		return ret;
+		goto err_rx_ctrl;
 
 	/* start periodical statistics fetch */
 	INIT_DELAYED_WORK(&lio->stats_wk.work, lio_fetch_stats);
@@ -1828,6 +1825,27 @@ static int liquidio_open(struct net_device *netdev)
 	dev_info(&oct->pci_dev->dev, "%s interface is opened\n",
 		 netdev->name);
 
+	return 0;
+
+err_rx_ctrl:
+	if (!OCTEON_CN23XX_PF(oct) || (OCTEON_CN23XX_PF(oct) && !oct->msix_on))
+		cleanup_tx_poll_fn(netdev);
+err_poll:
+	if (lio->ptp_clock) {
+		ptp_clock_unregister(lio->ptp_clock);
+		lio->ptp_clock = NULL;
+	}
+
+	if (oct->props[lio->ifidx].napi_enabled == 1) {
+		list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
+			napi_disable(napi);
+
+		oct->props[lio->ifidx].napi_enabled = 0;
+
+		if (OCTEON_CN23XX_PF(oct))
+			oct->droq[0]->ops.poll_mode = 0;
+	}
+
 	return ret;
 }
 

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -3172,6 +3172,7 @@ static int hclge_update_tp_port_info(struct hclge_dev *hdev)
 	hdev->hw.mac.autoneg = cmd.base.autoneg;
 	hdev->hw.mac.speed = cmd.base.speed;
 	hdev->hw.mac.duplex = cmd.base.duplex;
+	linkmode_copy(hdev->hw.mac.advertising, cmd.link_modes.advertising);
 
 	return 0;
 }
@@ -11669,9 +11670,12 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
 	if (ret)
 		goto err_msi_irq_uninit;
 
-	if (hdev->hw.mac.media_type == HNAE3_MEDIA_TYPE_COPPER &&
+	if (hdev->hw.mac.media_type == HNAE3_MEDIA_TYPE_COPPER) {
-	    !hnae3_dev_phy_imp_supported(hdev)) {
+		if (hnae3_dev_phy_imp_supported(hdev))
+			ret = hclge_update_tp_port_info(hdev);
+		else
 			ret = hclge_mac_mdio_config(hdev);
+
 		if (ret)
 			goto err_msi_irq_uninit;
 	}

drivers/net/ethernet/huawei/hinic/hinic_main.c

@@ -1482,8 +1482,15 @@ static struct pci_driver hinic_driver = {
 
 static int __init hinic_module_init(void)
 {
+	int ret;
+
 	hinic_dbg_register_debugfs(HINIC_DRV_NAME);
-	return pci_register_driver(&hinic_driver);
+
+	ret = pci_register_driver(&hinic_driver);
+	if (ret)
+		hinic_dbg_unregister_debugfs();
+
+	return ret;
 }
 
 static void __exit hinic_module_exit(void)

drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.c

@@ -1219,6 +1219,9 @@ int sparx_stats_init(struct sparx5 *sparx5)
 	snprintf(queue_name, sizeof(queue_name), "%s-stats",
 		 dev_name(sparx5->dev));
 	sparx5->stats_queue = create_singlethread_workqueue(queue_name);
+	if (!sparx5->stats_queue)
+		return -ENOMEM;
+
 	INIT_DELAYED_WORK(&sparx5->stats_work, sparx5_check_stats_work);
 	queue_delayed_work(sparx5->stats_queue, &sparx5->stats_work,
 			   SPX5_STATS_CHECK_DELAY);

drivers/net/ethernet/microchip/sparx5/sparx5_main.c

@@ -629,6 +629,9 @@ static int sparx5_start(struct sparx5 *sparx5)
 	snprintf(queue_name, sizeof(queue_name), "%s-mact",
 		 dev_name(sparx5->dev));
 	sparx5->mact_queue = create_singlethread_workqueue(queue_name);
+	if (!sparx5->mact_queue)
+		return -ENOMEM;
+
 	INIT_DELAYED_WORK(&sparx5->mact_work, sparx5_mact_pull_work);
 	queue_delayed_work(sparx5->mact_queue, &sparx5->mact_work,
 			   SPX5_MACT_PULL_DELAY);

drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c

@@ -1264,15 +1264,15 @@ nfp_port_get_module_info(struct net_device *netdev,
 
 		if (data < 0x3) {
 			modinfo->type = ETH_MODULE_SFF_8436;
-			modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
 		} else {
 			modinfo->type = ETH_MODULE_SFF_8636;
-			modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
 		}
 		break;
 	case NFP_INTERFACE_QSFP28:
 		modinfo->type = ETH_MODULE_SFF_8636;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
 		break;
 	default:
 		netdev_err(netdev, "Unsupported module 0x%x detected\n",

drivers/net/ethernet/pensando/ionic/ionic_main.c

@@ -588,8 +588,14 @@ int ionic_port_reset(struct ionic *ionic)
 
 static int __init ionic_init_module(void)
 {
+	int ret;
+
 	ionic_debugfs_create();
-	return ionic_bus_register_driver();
+	ret = ionic_bus_register_driver();
+	if (ret)
+		ionic_debugfs_destroy();
+
+	return ret;
 }
 
 static void __exit ionic_cleanup_module(void)

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -6494,6 +6494,9 @@ void stmmac_xdp_release(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 chan;
 
+	/* Ensure tx function is not running */
+	netif_tx_disable(dev);
+
 	/* Disable NAPI process */
 	stmmac_disable_all_queues(priv);
 

drivers/net/macvlan.c

@@ -141,7 +141,7 @@ static struct macvlan_source_entry *macvlan_hash_lookup_source(
 	u32 idx = macvlan_eth_hash(addr);
 	struct hlist_head *h = &vlan->port->vlan_source_hash[idx];
 
-	hlist_for_each_entry_rcu(entry, h, hlist) {
+	hlist_for_each_entry_rcu(entry, h, hlist, lockdep_rtnl_is_held()) {
 		if (ether_addr_equal_64bits(entry->addr, addr) &&
 		    entry->vlan == vlan)
 			return entry;
@@ -1181,7 +1181,7 @@ void macvlan_common_setup(struct net_device *dev)
 {
 	ether_setup(dev);
 
-	dev->min_mtu		= 0;
+	/* ether_setup() has set dev->min_mtu to ETH_MIN_MTU. */
 	dev->max_mtu		= ETH_MAX_MTU;
 	dev->priv_flags	       &= ~IFF_TX_SKB_SHARING;
 	netif_keep_dst(dev);
@@ -1635,7 +1635,7 @@ static int macvlan_fill_info_macaddr(struct sk_buff *skb,
 	struct hlist_head *h = &vlan->port->vlan_source_hash[i];
 	struct macvlan_source_entry *entry;
 
-	hlist_for_each_entry_rcu(entry, h, hlist) {
+	hlist_for_each_entry_rcu(entry, h, hlist, lockdep_rtnl_is_held()) {
 		if (entry->vlan != vlan)
 			continue;
 		if (nla_put(skb, IFLA_MACVLAN_MACADDR, ETH_ALEN, entry->addr))

drivers/net/mhi_net.c

@@ -343,6 +343,8 @@ static void mhi_net_dellink(struct mhi_device *mhi_dev, struct net_device *ndev)
 
 	kfree_skb(mhi_netdev->skbagg_head);
 
+	free_netdev(ndev);
+
 	dev_set_drvdata(&mhi_dev->dev, NULL);
 }
 

drivers/net/phy/marvell.c

@@ -1976,14 +1976,16 @@ static int m88e1510_loopback(struct phy_device *phydev, bool enable)
 		if (err < 0)
 			return err;
 
-		/* FIXME: Based on trial and error test, it seem 1G need to have
+		err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
-		 * delay between soft reset and loopback enablement.
-		 */
-		if (phydev->speed == SPEED_1000)
-			msleep(1000);
-
-		return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
 				 BMCR_LOOPBACK);
+
+		if (!err) {
+			/* It takes some time for PHY device to switch
+			 * into/out-of loopback mode.
+			 */
+			msleep(1000);
+		}
+		return err;
 	} else {
 		err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0);
 		if (err < 0)

drivers/net/thunderbolt.c

@@ -1377,12 +1377,21 @@ static int __init tbnet_init(void)
 				  TBNET_MATCH_FRAGS_ID | TBNET_64K_FRAMES);
 
 	ret = tb_register_property_dir("network", tbnet_dir);
-	if (ret) {
+	if (ret)
-		tb_property_free_dir(tbnet_dir);
+		goto err_free_dir;
-		return ret;
-	}
 
-	return tb_register_service_driver(&tbnet_driver);
+	ret = tb_register_service_driver(&tbnet_driver);
+	if (ret)
+		goto err_unregister;
+
+	return 0;
+
+err_unregister:
+	tb_unregister_property_dir("network", tbnet_dir);
+err_free_dir:
+	tb_property_free_dir(tbnet_dir);
+
+	return ret;
 }
 module_init(tbnet_init);
 

drivers/nvme/host/ioctl.c

@@ -484,11 +484,17 @@ long nvme_dev_ioctl(struct file *file, unsigned int cmd,
 	case NVME_IOCTL_IO_CMD:
 		return nvme_dev_user_cmd(ctrl, argp);
 	case NVME_IOCTL_RESET:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
 		dev_warn(ctrl->device, "resetting controller\n");
 		return nvme_reset_ctrl_sync(ctrl);
 	case NVME_IOCTL_SUBSYS_RESET:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
 		return nvme_reset_subsystem(ctrl);
 	case NVME_IOCTL_RESCAN:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
 		nvme_queue_scan(ctrl);
 		return 0;
 	default:

drivers/nvme/host/nvme.h

@@ -558,11 +558,23 @@ static inline void nvme_fault_inject_fini(struct nvme_fault_inject *fault_inj)
 static inline void nvme_should_fail(struct request *req) {}
 #endif
 
+bool nvme_wait_reset(struct nvme_ctrl *ctrl);
+int nvme_try_sched_reset(struct nvme_ctrl *ctrl);
+
 static inline int nvme_reset_subsystem(struct nvme_ctrl *ctrl)
 {
+	int ret;
+
 	if (!ctrl->subsystem)
 		return -ENOTTY;
-	return ctrl->ops->reg_write32(ctrl, NVME_REG_NSSR, 0x4E564D65);
+	if (!nvme_wait_reset(ctrl))
+		return -EBUSY;
+
+	ret = ctrl->ops->reg_write32(ctrl, NVME_REG_NSSR, 0x4E564D65);
+	if (ret)
+		return ret;
+
+	return nvme_try_sched_reset(ctrl);
 }
 
 /*
@@ -650,7 +662,6 @@ void nvme_cancel_tagset(struct nvme_ctrl *ctrl);
 void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl);
 bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 		enum nvme_ctrl_state new_state);
-bool nvme_wait_reset(struct nvme_ctrl *ctrl);
 int nvme_disable_ctrl(struct nvme_ctrl *ctrl);
 int nvme_enable_ctrl(struct nvme_ctrl *ctrl);
 int nvme_shutdown_ctrl(struct nvme_ctrl *ctrl);
@@ -734,7 +745,6 @@ int nvme_set_queue_count(struct nvme_ctrl *ctrl, int *count);
 void nvme_stop_keep_alive(struct nvme_ctrl *ctrl);
 int nvme_reset_ctrl(struct nvme_ctrl *ctrl);
 int nvme_reset_ctrl_sync(struct nvme_ctrl *ctrl);
-int nvme_try_sched_reset(struct nvme_ctrl *ctrl);
 int nvme_delete_ctrl(struct nvme_ctrl *ctrl);
 void nvme_queue_scan(struct nvme_ctrl *ctrl);
 int nvme_get_log(struct nvme_ctrl *ctrl, u32 nsid, u8 log_page, u8 lsp, u8 csi,

drivers/parport/parport_pc.c

@@ -468,7 +468,7 @@ static size_t parport_pc_fifo_write_block_pio(struct parport *port,
 	const unsigned char *bufp = buf;
 	size_t left = length;
 	unsigned long expire = jiffies + port->physport->cad->timeout;
-	const int fifo = FIFO(port);
+	const unsigned long fifo = FIFO(port);
 	int poll_for = 8; /* 80 usecs */
 	const struct parport_pc_private *priv = port->physport->private_data;
 	const int fifo_depth = priv->fifo_depth;

drivers/pinctrl/devicetree.c

@@ -220,6 +220,8 @@ int pinctrl_dt_to_map(struct pinctrl *p, struct pinctrl_dev *pctldev)
 	for (state = 0; ; state++) {
 		/* Retrieve the pinctrl-* property */
 		propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state);
+		if (!propname)
+			return -ENOMEM;
 		prop = of_find_property(np, propname, &size);
 		kfree(propname);
 		if (!prop) {

drivers/pinctrl/pinctrl-rockchip.c

@@ -608,14 +608,54 @@ static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin,
 }
 
 static struct rockchip_mux_route_data px30_mux_route_data[] = {
+	RK_MUXROUTE_SAME(2, RK_PB4, 1, 0x184, BIT(16 + 7)), /* cif-d0m0 */
+	RK_MUXROUTE_SAME(3, RK_PA1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d0m1 */
+	RK_MUXROUTE_SAME(2, RK_PB6, 1, 0x184, BIT(16 + 7)), /* cif-d1m0 */
+	RK_MUXROUTE_SAME(3, RK_PA2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d1m1 */
 	RK_MUXROUTE_SAME(2, RK_PA0, 1, 0x184, BIT(16 + 7)), /* cif-d2m0 */
 	RK_MUXROUTE_SAME(3, RK_PA3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d2m1 */
+	RK_MUXROUTE_SAME(2, RK_PA1, 1, 0x184, BIT(16 + 7)), /* cif-d3m0 */
+	RK_MUXROUTE_SAME(3, RK_PA5, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d3m1 */
+	RK_MUXROUTE_SAME(2, RK_PA2, 1, 0x184, BIT(16 + 7)), /* cif-d4m0 */
+	RK_MUXROUTE_SAME(3, RK_PA7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d4m1 */
+	RK_MUXROUTE_SAME(2, RK_PA3, 1, 0x184, BIT(16 + 7)), /* cif-d5m0 */
+	RK_MUXROUTE_SAME(3, RK_PB0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d5m1 */
+	RK_MUXROUTE_SAME(2, RK_PA4, 1, 0x184, BIT(16 + 7)), /* cif-d6m0 */
+	RK_MUXROUTE_SAME(3, RK_PB1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d6m1 */
+	RK_MUXROUTE_SAME(2, RK_PA5, 1, 0x184, BIT(16 + 7)), /* cif-d7m0 */
+	RK_MUXROUTE_SAME(3, RK_PB4, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d7m1 */
+	RK_MUXROUTE_SAME(2, RK_PA6, 1, 0x184, BIT(16 + 7)), /* cif-d8m0 */
+	RK_MUXROUTE_SAME(3, RK_PB6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d8m1 */
+	RK_MUXROUTE_SAME(2, RK_PA7, 1, 0x184, BIT(16 + 7)), /* cif-d9m0 */
+	RK_MUXROUTE_SAME(3, RK_PB7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d9m1 */
+	RK_MUXROUTE_SAME(2, RK_PB7, 1, 0x184, BIT(16 + 7)), /* cif-d10m0 */
+	RK_MUXROUTE_SAME(3, RK_PC6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d10m1 */
+	RK_MUXROUTE_SAME(2, RK_PC0, 1, 0x184, BIT(16 + 7)), /* cif-d11m0 */
+	RK_MUXROUTE_SAME(3, RK_PC7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d11m1 */
+	RK_MUXROUTE_SAME(2, RK_PB0, 1, 0x184, BIT(16 + 7)), /* cif-vsyncm0 */
+	RK_MUXROUTE_SAME(3, RK_PD1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-vsyncm1 */
+	RK_MUXROUTE_SAME(2, RK_PB1, 1, 0x184, BIT(16 + 7)), /* cif-hrefm0 */
+	RK_MUXROUTE_SAME(3, RK_PD2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-hrefm1 */
+	RK_MUXROUTE_SAME(2, RK_PB2, 1, 0x184, BIT(16 + 7)), /* cif-clkinm0 */
+	RK_MUXROUTE_SAME(3, RK_PD3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkinm1 */
+	RK_MUXROUTE_SAME(2, RK_PB3, 1, 0x184, BIT(16 + 7)), /* cif-clkoutm0 */
+	RK_MUXROUTE_SAME(3, RK_PD0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkoutm1 */
 	RK_MUXROUTE_SAME(3, RK_PC6, 2, 0x184, BIT(16 + 8)), /* pdm-m0 */
 	RK_MUXROUTE_SAME(2, RK_PC6, 1, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-m1 */
+	RK_MUXROUTE_SAME(3, RK_PD3, 2, 0x184, BIT(16 + 8)), /* pdm-sdi0m0 */
+	RK_MUXROUTE_SAME(2, RK_PC5, 2, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-sdi0m1 */
 	RK_MUXROUTE_SAME(1, RK_PD3, 2, 0x184, BIT(16 + 10)), /* uart2-rxm0 */
 	RK_MUXROUTE_SAME(2, RK_PB6, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-rxm1 */
+	RK_MUXROUTE_SAME(1, RK_PD2, 2, 0x184, BIT(16 + 10)), /* uart2-txm0 */
+	RK_MUXROUTE_SAME(2, RK_PB4, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-txm1 */
 	RK_MUXROUTE_SAME(0, RK_PC1, 2, 0x184, BIT(16 + 9)), /* uart3-rxm0 */
 	RK_MUXROUTE_SAME(1, RK_PB7, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rxm1 */
+	RK_MUXROUTE_SAME(0, RK_PC0, 2, 0x184, BIT(16 + 9)), /* uart3-txm0 */
+	RK_MUXROUTE_SAME(1, RK_PB6, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-txm1 */
+	RK_MUXROUTE_SAME(0, RK_PC2, 2, 0x184, BIT(16 + 9)), /* uart3-ctsm0 */
+	RK_MUXROUTE_SAME(1, RK_PB4, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-ctsm1 */
+	RK_MUXROUTE_SAME(0, RK_PC3, 2, 0x184, BIT(16 + 9)), /* uart3-rtsm0 */
+	RK_MUXROUTE_SAME(1, RK_PB5, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rtsm1 */
 };
 
 static struct rockchip_mux_route_data rk3128_mux_route_data[] = {

drivers/platform/surface/aggregator/ssh_packet_layer.c

@@ -1596,16 +1596,32 @@ static void ssh_ptl_timeout_reap(struct work_struct *work)
 		ssh_ptl_tx_wakeup_packet(ptl);
 }
 
-static bool ssh_ptl_rx_retransmit_check(struct ssh_ptl *ptl, u8 seq)
+static bool ssh_ptl_rx_retransmit_check(struct ssh_ptl *ptl, const struct ssh_frame *frame)
 {
 	int i;
 
+	/*
+	 * Ignore unsequenced packets. On some devices (notably Surface Pro 9),
+	 * unsequenced events will always be sent with SEQ=0x00. Attempting to
+	 * detect retransmission would thus just block all events.
+	 *
+	 * While sequence numbers would also allow detection of retransmitted
+	 * packets in unsequenced communication, they have only ever been used
+	 * to cover edge-cases in sequenced transmission. In particular, the
+	 * only instance of packets being retransmitted (that we are aware of)
+	 * is due to an ACK timeout. As this does not happen in unsequenced
+	 * communication, skip the retransmission check for those packets
+	 * entirely.
+	 */
+	if (frame->type == SSH_FRAME_TYPE_DATA_NSQ)
+		return false;
+
 	/*
 	 * Check if SEQ has been seen recently (i.e. packet was
 	 * re-transmitted and we should ignore it).
 	 */
 	for (i = 0; i < ARRAY_SIZE(ptl->rx.blocked.seqs); i++) {
-		if (likely(ptl->rx.blocked.seqs[i] != seq))
+		if (likely(ptl->rx.blocked.seqs[i] != frame->seq))
 			continue;
 
 		ptl_dbg(ptl, "ptl: ignoring repeated data packet\n");
@@ -1613,7 +1629,7 @@ static bool ssh_ptl_rx_retransmit_check(struct ssh_ptl *ptl, u8 seq)
 	}
 
 	/* Update list of blocked sequence IDs. */
-	ptl->rx.blocked.seqs[ptl->rx.blocked.offset] = seq;
+	ptl->rx.blocked.seqs[ptl->rx.blocked.offset] = frame->seq;
 	ptl->rx.blocked.offset = (ptl->rx.blocked.offset + 1)
 				  % ARRAY_SIZE(ptl->rx.blocked.seqs);
 
@@ -1624,7 +1640,7 @@ static void ssh_ptl_rx_dataframe(struct ssh_ptl *ptl,
 				 const struct ssh_frame *frame,
 				 const struct ssam_span *payload)
 {
-	if (ssh_ptl_rx_retransmit_check(ptl, frame->seq))
+	if (ssh_ptl_rx_retransmit_check(ptl, frame))
 		return;
 
 	ptl->ops.data_received(ptl, payload);

drivers/platform/x86/intel/pmc/pltdrv.c

@@ -18,6 +18,8 @@
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 
+#include <xen/xen.h>
+
 static void intel_pmc_core_release(struct device *dev)
 {
 	kfree(dev);
@@ -53,6 +55,13 @@ static int __init pmc_core_platform_init(void)
 	if (acpi_dev_present("INT33A1", NULL, -1))
 		return -ENODEV;
 
+	/*
+	 * Skip forcefully attaching the device for VMs. Make an exception for
+	 * Xen dom0, which does have full hardware access.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR) && !xen_initial_domain())
+		return -ENODEV;
+
 	if (!x86_match_cpu(intel_pmc_core_platform_ids))
 		return -ENODEV;
 

drivers/s390/scsi/zfcp_fsf.c

@@ -884,7 +884,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
 	const bool is_srb = zfcp_fsf_req_is_status_read_buffer(req);
 	struct zfcp_adapter *adapter = req->adapter;
 	struct zfcp_qdio *qdio = adapter->qdio;
-	int req_id = req->req_id;
+	unsigned long req_id = req->req_id;
 
 	zfcp_reqlist_add(adapter->req_list, req);
 

drivers/scsi/scsi_debug.c

@@ -7211,8 +7211,12 @@ static int sdebug_add_host_helper(int per_host_idx)
 	dev_set_name(&sdbg_host->dev, "adapter%d", sdebug_num_hosts);
 
 	error = device_register(&sdbg_host->dev);
-	if (error)
+	if (error) {
+		spin_lock(&sdebug_host_list_lock);
+		list_del(&sdbg_host->host_list);
+		spin_unlock(&sdebug_host_list_lock);
 		goto clean;
+	}
 
 	++sdebug_num_hosts;
 	return 0;

drivers/scsi/scsi_transport_sas.c

@@ -716,12 +716,17 @@ int sas_phy_add(struct sas_phy *phy)
 	int error;
 
 	error = device_add(&phy->dev);
-	if (!error) {
+	if (error)
-		transport_add_device(&phy->dev);
-		transport_configure_device(&phy->dev);
-	}
-
 		return error;
+
+	error = transport_add_device(&phy->dev);
+	if (error) {
+		device_del(&phy->dev);
+		return error;
+	}
+	transport_configure_device(&phy->dev);
+
+	return 0;
 }
 EXPORT_SYMBOL(sas_phy_add);
 

drivers/siox/siox-core.c

@@ -839,6 +839,8 @@ static struct siox_device *siox_device_add(struct siox_master *smaster,
 
 err_device_register:
 	/* don't care to make the buffer smaller again */
+	put_device(&sdevice->dev);
+	sdevice = NULL;
 
 err_buf_alloc:
 	siox_master_unlock(smaster);

drivers/slimbus/Kconfig

@@ -23,7 +23,7 @@ config SLIM_QCOM_CTRL
 config SLIM_QCOM_NGD_CTRL
 	tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
 	depends on HAS_IOMEM && DMA_ENGINE && NET
-	depends on QCOM_RPROC_COMMON || COMPILE_TEST
+	depends on QCOM_RPROC_COMMON || (COMPILE_TEST && !QCOM_RPROC_COMMON)
 	depends on ARCH_QCOM || COMPILE_TEST
 	select QCOM_QMI_HELPERS
 	select QCOM_PDR_HELPERS

drivers/slimbus/stream.c

@@ -67,10 +67,10 @@ static const int slim_presence_rate_table[] = {
 	384000,
 	768000,
 	0, /* Reserved */
-	110250,
+	11025,
-	220500,
+	22050,
-	441000,
+	44100,
-	882000,
+	88200,
 	176400,
 	352800,
 	705600,

drivers/soc/imx/soc-imx8m.c

@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/arm-smccc.h>
 #include <linux/of.h>
+#include <linux/clk.h>
 
 #define REV_B1				0x21
 
@@ -56,6 +57,7 @@ static u32 __init imx8mq_soc_revision(void)
 	void __iomem *ocotp_base;
 	u32 magic;
 	u32 rev;
+	struct clk *clk;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp");
 	if (!np)
@@ -63,6 +65,13 @@ static u32 __init imx8mq_soc_revision(void)
 
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
+	clk = of_clk_get_by_name(np, NULL);
+	if (!clk) {
+		WARN_ON(!clk);
+		return 0;
+	}
+
+	clk_prepare_enable(clk);
 
 	/*
 	 * SOC revision on older imx8mq is not available in fuses so query
@@ -79,6 +88,8 @@ static u32 __init imx8mq_soc_revision(void)
 	soc_uid <<= 32;
 	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
 
+	clk_disable_unprepare(clk);
+	clk_put(clk);
 	iounmap(ocotp_base);
 	of_node_put(np);
 

drivers/spi/spi-stm32.c

@@ -886,6 +886,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 		static DEFINE_RATELIMIT_STATE(rs,
 					      DEFAULT_RATELIMIT_INTERVAL * 10,
 					      1);
+		ratelimit_set_flags(&rs, RATELIMIT_MSG_ON_RELEASE);
 		if (__ratelimit(&rs))
 			dev_dbg_ratelimited(spi->dev, "Communication suspended\n");
 		if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))

drivers/target/loopback/tcm_loop.c

@@ -397,6 +397,7 @@ static int tcm_loop_setup_hba_bus(struct tcm_loop_hba *tl_hba, int tcm_loop_host
 	ret = device_register(&tl_hba->dev);
 	if (ret) {
 		pr_err("device_register() failed for tl_hba->dev: %d\n", ret);
+		put_device(&tl_hba->dev);
 		return -ENODEV;
 	}
 
@@ -1073,7 +1074,7 @@ check_len:
 	 */
 	ret = tcm_loop_setup_hba_bus(tl_hba, tcm_loop_hba_no_cnt);
 	if (ret)
-		goto out;
+		return ERR_PTR(ret);
 
 	sh = tl_hba->sh;
 	tcm_loop_hba_no_cnt++;

drivers/tty/n_gsm.c

@@ -1577,7 +1577,7 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
 		unsigned int command, u8 *data, int clen)
 {
 	struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control),
-						GFP_KERNEL);
+						GFP_ATOMIC);
 	unsigned long flags;
 	if (ctrl == NULL)
 		return NULL;

drivers/tty/serial/8250/8250_lpss.c

@@ -177,6 +177,9 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	 * matching with the registered General Purpose DMA controllers.
 	 */
 	up->dma = dma;
+
+	lpss->dma_maxburst = 16;
+
 	return 0;
 }
 
@@ -278,8 +281,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 	struct dw_dma_slave *rx_param, *tx_param;
 	struct device *dev = port->port.dev;
 
-	if (!lpss->dma_param.dma_dev)
+	if (!lpss->dma_param.dma_dev) {
+		dma = port->dma;
+		if (dma)
+			goto out_configuration_only;
+
 		return 0;
+	}
 
 	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
 	if (!rx_param)
@@ -290,16 +298,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 		return -ENOMEM;
 
 	*rx_param = lpss->dma_param;
-	dma->rxconf.src_maxburst = lpss->dma_maxburst;
-
 	*tx_param = lpss->dma_param;
-	dma->txconf.dst_maxburst = lpss->dma_maxburst;
 
 	dma->fn = lpss8250_dma_filter;
 	dma->rx_param = rx_param;
 	dma->tx_param = tx_param;
 
 	port->dma = dma;
+
+out_configuration_only:
+	dma->rxconf.src_maxburst = lpss->dma_maxburst;
+	dma->txconf.dst_maxburst = lpss->dma_maxburst;
+
 	return 0;
 }
 

drivers/tty/serial/8250/8250_omap.c

@@ -157,7 +157,11 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg)
 	return readl(up->port.membase + (reg << up->port.regshift));
 }
 
-static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+/*
+ * Called on runtime PM resume path from omap8250_restore_regs(), and
+ * omap8250_set_mctrl().
+ */
+static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = up->port.private_data;
@@ -181,6 +185,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	}
 }
 
+static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	int err;
+
+	err = pm_runtime_resume_and_get(port->dev);
+	if (err)
+		return;
+
+	__omap8250_set_mctrl(port, mctrl);
+
+	pm_runtime_mark_last_busy(port->dev);
+	pm_runtime_put_autosuspend(port->dev);
+}
+
 /*
  * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
  * The access to uart register after MDR1 Access
@@ -193,27 +211,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
 				     struct omap8250_priv *priv)
 {
-	u8 timeout = 255;
-
 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);
 	udelay(2);
 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
 			UART_FCR_CLEAR_RCVR);
-	/*
-	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
-	 * TX_FIFO_E bit is 1.
-	 */
-	while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
-				(UART_LSR_THRE | UART_LSR_DR))) {
-		timeout--;
-		if (!timeout) {
-			/* Should *never* happen. we warn and carry on */
-			dev_crit(up->port.dev, "Errata i202: timedout %x\n",
-				 serial_in(up, UART_LSR));
-			break;
-		}
-		udelay(1);
-	}
 }
 
 static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
@@ -341,7 +342,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 
 	omap8250_update_mdr1(up, priv);
 
-	up->port.ops->set_mctrl(&up->port, up->port.mctrl);
+	__omap8250_set_mctrl(&up->port, up->port.mctrl);
 
 	if (up->port.rs485.flags & SER_RS485_ENABLED)
 		serial8250_em485_stop_tx(up);
@@ -1474,9 +1475,15 @@ err:
 static int omap8250_remove(struct platform_device *pdev)
 {
 	struct omap8250_priv *priv = platform_get_drvdata(pdev);
+	int err;
+
+	err = pm_runtime_resume_and_get(&pdev->dev);
+	if (err)
+		return err;
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
+	flush_work(&priv->qos_work);
 	pm_runtime_disable(&pdev->dev);
 	serial8250_unregister_port(priv->line);
 	cpu_latency_qos_remove_request(&priv->pm_qos_request);

drivers/tty/serial/8250/8250_port.c

@@ -1885,10 +1885,13 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status);
 static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 {
 	switch (iir & 0x3f) {
-	case UART_IIR_RX_TIMEOUT:
+	case UART_IIR_RDI:
-		serial8250_rx_dma_flush(up);
+		if (!up->dma->rx_running)
+			break;
 		fallthrough;
 	case UART_IIR_RLSI:
+	case UART_IIR_RX_TIMEOUT:
+		serial8250_rx_dma_flush(up);
 		return true;
 	}
 	return up->dma->rx_dma(up);

drivers/tty/serial/imx.c

@@ -2563,6 +2563,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = {
 	.suspend_noirq = imx_uart_suspend_noirq,
 	.resume_noirq = imx_uart_resume_noirq,
 	.freeze_noirq = imx_uart_suspend_noirq,
+	.thaw_noirq = imx_uart_resume_noirq,
 	.restore_noirq = imx_uart_resume_noirq,
 	.suspend = imx_uart_suspend,
 	.resume = imx_uart_resume,

drivers/usb/cdns3/host.c

@@ -23,11 +23,37 @@
 #define CFG_RXDET_P3_EN		BIT(15)
 #define LPM_2_STB_SWITCH_EN	BIT(25)
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd);
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
 
 static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
 	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
-	.suspend_quirk = xhci_cdns3_suspend_quirk,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
 };
 
 static int __cdns_host_init(struct cdns *cdns)
@@ -89,32 +115,6 @@ err1:
 	return ret;
 }
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	u32 value;
-
-	if (pm_runtime_status_suspended(hcd->self.controller))
-		return 0;
-
-	/* set usbcmd.EU3S */
-	value = readl(&xhci->op_regs->command);
-	value |= CMD_PM_INDEX;
-	writel(value, &xhci->op_regs->command);
-
-	if (hcd->regs) {
-		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
-		value |= CFG_RXDET_P3_EN;
-		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
-
-		value = readl(hcd->regs + XECP_PORT_CAP_REG);
-		value |= LPM_2_STB_SWITCH_EN;
-		writel(value, hcd->regs + XECP_PORT_CAP_REG);
-	}
-
-	return 0;
-}
-
 static void cdns_host_exit(struct cdns *cdns)
 {
 	kfree(cdns->xhci_plat_data);

drivers/usb/chipidea/otg_fsm.c

@@ -256,8 +256,10 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 	ci->enabled_otg_timer_bits &= ~(1 << t);
 	if (ci->next_otg_timer == t) {
 		if (ci->enabled_otg_timer_bits == 0) {
+			spin_unlock_irqrestore(&ci->lock, flags);
 			/* No enabled timers after delete it */
 			hrtimer_cancel(&ci->otg_fsm_hrtimer);
+			spin_lock_irqsave(&ci->lock, flags);
 			ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
 		} else {
 			/* Find the next timer */

drivers/usb/core/quirks.c

@@ -362,6 +362,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
 	{ USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* Realforce 87U Keyboard */
+	{ USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 

drivers/usb/dwc3/host.c

@@ -10,13 +10,8 @@
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
 
-#include "../host/xhci-plat.h"
 #include "core.h"
 
-static const struct xhci_plat_priv dwc3_xhci_plat_priv = {
-	.quirks = XHCI_SKIP_PHY_INIT,
-};
-
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
@@ -92,11 +87,6 @@ int dwc3_host_init(struct dwc3 *dwc)
 		goto err;
 	}
 
-	ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
-					sizeof(dwc3_xhci_plat_priv));
-	if (ret)
-		goto err;
-
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
 	if (dwc->usb3_lpm_capable)

drivers/usb/host/bcma-hcd.c

@@ -285,7 +285,7 @@ static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
 {
 	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
 
-	if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
+	if (!usb_dev->gpio_desc)
 		return;
 
 	gpiod_set_value(usb_dev->gpio_desc, val);
@@ -406,9 +406,11 @@ static int bcma_hcd_probe(struct bcma_device *core)
 		return -ENOMEM;
 	usb_dev->core = core;
 
-	if (core->dev.of_node)
+	usb_dev->gpio_desc = devm_gpiod_get_optional(&core->dev, "vcc",
-		usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc",
 						     GPIOD_OUT_HIGH);
+	if (IS_ERR(usb_dev->gpio_desc))
+		return dev_err_probe(&core->dev, PTR_ERR(usb_dev->gpio_desc),
+				     "error obtaining VCC GPIO");
 
 	switch (core->id.id) {
 	case BCMA_CORE_USB20_HOST:

drivers/usb/serial/option.c

@@ -162,6 +162,8 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
 #define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
+#define UBLOX_VENDOR_ID				0x1546
+
 /* AMOI PRODUCTS */
 #define AMOI_VENDOR_ID				0x1614
 #define AMOI_PRODUCT_H01			0x0800
@@ -240,7 +242,6 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_UC15			0x9090
 /* These u-blox products use Qualcomm's vendor ID */
 #define UBLOX_PRODUCT_R410M			0x90b2
-#define UBLOX_PRODUCT_R6XX			0x90fa
 /* These Yuga products use Qualcomm's vendor ID */
 #define YUGA_PRODUCT_CLM920_NC5			0x9625
 
@@ -581,6 +582,9 @@ static void option_instat_callback(struct urb *urb);
 #define OPPO_VENDOR_ID				0x22d9
 #define OPPO_PRODUCT_R11			0x276c
 
+/* Sierra Wireless products */
+#define SIERRA_VENDOR_ID			0x1199
+#define SIERRA_PRODUCT_EM9191			0x90d3
 
 /* Device flags */
 
@@ -1124,8 +1128,16 @@ static const struct usb_device_id option_ids[] = {
 	/* u-blox products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
 	  .driver_info = RSVD(1) | RSVD(3) },
-	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x908b),	/* u-blox LARA-R6 00B */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa),
 	  .driver_info = RSVD(3) },
+	/* u-blox products */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) },	/* u-blox LARA-L6 */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1342),		/* u-blox LARA-L6 (RMNET) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1343),		/* u-blox LARA-L6 (ECM) */
+	  .driver_info = RSVD(4) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
@@ -2167,6 +2179,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) },			/* Fibocom MA510 (ECM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
@@ -2176,6 +2189,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/typec/mux/intel_pmc_mux.c

@@ -352,13 +352,24 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state)
 	return pmc_usb_command(port, (void *)&req, sizeof(req));
 }
 
-static int pmc_usb_mux_safe_state(struct pmc_usb_port *port)
+static int pmc_usb_mux_safe_state(struct pmc_usb_port *port,
+				  struct typec_mux_state *state)
 {
 	u8 msg;
 
 	if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE))
 		return 0;
 
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_DP_SID)
+		return 0;
+
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_TBT_SID)
+		return 0;
+
 	msg = PMC_USB_SAFE_MODE;
 	msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
 
@@ -426,7 +437,7 @@ pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
 		return 0;
 
 	if (state->mode == TYPEC_STATE_SAFE)
-		return pmc_usb_mux_safe_state(port);
+		return pmc_usb_mux_safe_state(port, state);
 	if (state->mode == TYPEC_STATE_USB)
 		return pmc_usb_connect(port, port->role);
 

drivers/xen/pcpu.c

@@ -228,7 +228,7 @@ static int register_pcpu(struct pcpu *pcpu)
 
 	err = device_register(dev);
 	if (err) {
-		pcpu_release(dev);
+		put_device(dev);
 		return err;
 	}