Re-add brcmf_netdev_ioctl_entry() removed in the commit : e601fb3740
It returns dummy response to critical android private commands of SETSUSPENDMODE & BTCOEXMODE.
To comply with the intended usage of the V4L2 selection target when
used to retrieve a sensor image properties, adjust the rectangles
returned by the ov5647 driver.
The top/left crop coordinates of the TGT_CROP rectangle were set to
(0, 0) instead of (16, 16) which is the offset from the larger physical
pixel array rectangle. This was also a mismatch with the default values
crop rectangle value, so this is corrected. Found with v4l2-compliance.
While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and
CROP_BOUNDS have the same size as the non-active pixels are not readable
using the selection API. Found with v4l2-compliance.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
The overlays for the ads1015 and ads1115 I2C ADCs omitted the addresses
in the main device node names. As well as breaking the conventions for
I2C devices, this prevents the firmware from renaming them when the
"reg" property is modified, which in turn stops the overlays from being
instantiated multiple times.
See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=294465
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The mpu6050 starts up at address 0x68 by default, but can be set to
0x69 if the ADO pin is pulled high. Give the overlay an addr parameter
to allow devices at the alternate address to be used.
See: https://github.com/Hexxeh/rpi-firmware/issues/252
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
lan78xx_link_reset explicitly clears the MAC's view of the PHY's IRQ
status. In doing so it potentially leaves the PHY with a pending
interrupt that will never be acknowledged, at which point no further
interrupts will be generated.
Avoid the problem by acknowledging any pending PHY interrupt after
clearing the MAC's status bit.
See: https://github.com/raspberrypi/linux/issues/2937
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Sync up with android11-5.4 for the following commit:
35042a2a91 ANDROID: ABI: Update allowed list for QCOM
bf9fcff8a8 ANDROID: x86: configs: gki: add missing CONFIG_BLK_CGROUP
9c7d617b7c ANDROID: ABI: Update allowed list for QCOM
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I24911124135573c080173367cc888358956cff16
Upstream commit bb4c6910c8 ("genirq/irqdomain: Add an
irq_create_mapping_affinity() function") ended up removing the
irq_create_mapping() function and replacing it with an inline function.
That's fine, except that this function was one of our "must support" api
calls, so put it back as an exported function to preserve the ABI.
Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibb1c480c0ba4eb8b3d6c71cabf83467ee2d1f12b
Changes in 5.4.83
pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
Partially revert bpf: Zero-fill re-used per-cpu map element
usb: gadget: f_fs: Use local copy of descriptors for userspace copy
USB: serial: kl5kusb105: fix memleak on open
USB: serial: ch341: add new Product ID for CH341A
USB: serial: ch341: sort device-id entries
USB: serial: option: add Fibocom NL668 variants
USB: serial: option: add support for Thales Cinterion EXS82
USB: serial: option: fix Quectel BG96 matching
tty: Fix ->pgrp locking in tiocspgrp()
tty: Fix ->session locking
ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14
ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model
ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294
ALSA: hda/realtek - Add new codec supported for ALC897
ALSA: hda/generic: Add option to enforce preferred_dacs pairs
ftrace: Fix updating FTRACE_FL_TRAMP
cifs: allow syscalls to be restarted in __smb_send_rqst()
cifs: fix potential use-after-free in cifs_echo_request()
i2c: imx: Don't generate STOP condition if arbitration has been lost
thunderbolt: Fix use-after-free in remove_unplugged_switch()
drm/i915/gt: Program mocs:63 for cache eviction on gen9
scsi: mpt3sas: Fix ioctl timeout
dm writecache: fix the maximum number of arguments
powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE
genirq/irqdomain: Add an irq_create_mapping_affinity() function
powerpc/pseries: Pass MSI affinity to irq_create_mapping()
dm: fix bug with RCU locking in dm_blk_report_zones
dm: remove invalid sparse __acquires and __releases annotations
x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes
coredump: fix core_pattern parse error
mm: list_lru: set shrinker map bit when child nr_items is not zero
mm/swapfile: do not sleep with a spin lock held
speakup: Reject setting the speakup line discipline outside of speakup
i2c: imx: Fix reset of I2SR_IAL flag
i2c: imx: Check for I2SR_IAL after every byte
spi: bcm2835: Release the DMA channel if probe fails after dma_init
iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs
tracing: Fix userstacktrace option for instances
lib/syscall: fix syscall registers retrieval on 32-bit platforms
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
gfs2: check for empty rgrp tree in gfs2_ri_update
netfilter: ipset: prevent uninit-value in hash_ip6_add
tipc: fix a deadlock when flushing scheduled work
ASoC: wm_adsp: fix error return code in wm_adsp_load()
rtw88: debug: Fix uninitialized memory in debugfs code
i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()
dm writecache: remove BUG() and fail gracefully instead
Input: i8042 - fix error return code in i8042_setup_aux()
netfilter: nf_tables: avoid false-postive lockdep splat
netfilter: nftables_offload: set address type in control dissector
x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes
Revert "geneve: pull IP header before ECN decapsulation"
Linux 5.4.83
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5753999d7c8f19f5b8b6f5f9e850c64744a257fc
Sync up with android11-5.4 for the following commit:
c797384edc ANDROID: kthread: break dependency between worker->lock and task_struct->pi_lock
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib349d655a83eb074e859fb8bb69111a135d22861
commit 3c78e9e0d3 upstream.
This patch adds nft_flow_rule_set_addr_type() to set the address type
from the nft_payload expression accordingly.
If the address type is not set in the control dissector then a rule that
matches either on source or destination IP address does not work.
After this patch, nft hardware offload generates the flow dissector
configuration as tc-flower does to match on an IP address.
This patch has been also tested functionally to make sure packets are
filtered out by the NIC.
This is also getting the code aligned with the existing netfilter flow
offload infrastructure which is also setting the control dissector.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0700dfa2c upstream.
There are reports wrt lockdep splat in nftables, e.g.:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 31416 at net/netfilter/nf_tables_api.c:622
lockdep_nfnl_nft_mutex_not_held+0x28/0x38 [nf_tables]
...
These are caused by an earlier, unrelated bug such as a n ABBA deadlock
in a different subsystem.
In such an event, lockdep is disabled and lockdep_is_held returns true
unconditionally. This then causes the WARN() in nf_tables.
Make the WARN conditional on lockdep still active to avoid this.
Fixes: f102d66b33 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYvFUpODs+NkSYcnwKnXm62tmP=ksLeBPmB+KFrB2rvCtQ@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 857c4c0a8b upstream.
Building on arch/s390/ results in this build error:
cc1: some warnings being treated as errors
../drivers/md/dm-writecache.c: In function 'persistent_memory_claim':
../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type]
Fix this by replacing the BUG() with an -EOPNOTSUPP return.
Fixes: 48debafe4f ("dm: add writecache target")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d966ddcc38 upstream.
In the commit fdeba99b1e
("tipc: fix use-after-free in tipc_bcast_get_mode"), we're trying
to make sure the tipc_net_finalize_work work item finished if it
enqueued. But calling flush_scheduled_work() is not just affecting
above work item but either any scheduled work. This has turned out
to be overkill and caused to deadlock as syzbot reported:
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2-next-20200828-syzkaller #0 Not tainted
------------------------------------------------------
kworker/u4:6/349 is trying to acquire lock:
ffff8880aa063d38 ((wq_completion)events){+.+.}-{0:0}, at: flush_workqueue+0xe1/0x13e0 kernel/workqueue.c:2777
but task is already holding lock:
ffffffff8a879430 (pernet_ops_rwsem){++++}-{3:3}, at: cleanup_net+0x9b/0xb10 net/core/net_namespace.c:565
[...]
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pernet_ops_rwsem);
lock(&sb->s_type->i_mutex_key#13);
lock(pernet_ops_rwsem);
lock((wq_completion)events);
*** DEADLOCK ***
[...]
v1:
To fix the original issue, we replace above calling by introducing
a bit flag. When a namespace cleaned-up, bit flag is set to zero and:
- tipc_net_finalize functionial just does return immediately.
- tipc_net_finalize_work does not enqueue into the scheduled work queue.
v2:
Use cancel_work_sync() helper to make sure ONLY the
tipc_net_finalize_work() stopped before releasing bcbase object.
Reported-by: syzbot+d5aa7e0385f6a5d0f4fd@syzkaller.appspotmail.com
Fixes: fdeba99b1e ("tipc: fix use-after-free in tipc_bcast_get_mode")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 778721510e upstream.
If gfs2 tries to mount a (corrupt) file system that has no resource
groups it still tries to set preferences on the first one, which causes
a kernel null pointer dereference. This patch adds a check to function
gfs2_ri_update so this condition is detected and reported back as an
error.
Reported-by: syzbot+e3f23ce40269a4c9053a@syzkaller.appspotmail.com
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f134b89a2 upstream.
Lilith >_> and Claudio Bozzato of Cisco Talos security team reported
that collect_syscall() improperly casts the syscall registers to 64-bit
values leaking the uninitialized last 24 bytes on 32-bit platforms, that
are visible in /proc/self/syscall.
The cause is that info->data.args are u64 while syscall_get_arguments()
uses longs, as hinted by the bogus pointer cast in the function.
Let's just proceed like the other call places, by retrieving the
registers into an array of longs before assigning them to the caller's
array. This was successfully tested on x86_64, i386 and ppc32.
Reference: CVE-2020-28588, TALOS-2020-1211
Fixes: 631b7abacd ("ptrace: Remove maxargs from task_current_syscall()")
Cc: Greg KH <greg@kroah.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (ppc32)
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcee527895 upstream.
When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)
Cc: stable@vger.kernel.org
Fixes: 16270145ce ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1de67a3dee upstream.
Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 384a9565f7 upstream.
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: 4b775022f6 ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8199be001a upstream.
When investigating a slab cache bloat problem, significant amount of
negative dentry cache was seen, but confusingly they neither got shrunk
by reclaimer (the host has very tight memory) nor be shrunk by dropping
cache. The vmcore shows there are over 14M negative dentry objects on
lru, but tracing result shows they were even not scanned at all.
Further investigation shows the memcg's vfs shrinker_map bit is not set.
So the reclaimer or dropping cache just skip calling vfs shrinker. So
we have to reboot the hosts to get the memory back.
I didn't manage to come up with a reproducer in test environment, and
the problem can't be reproduced after rebooting. But it seems there is
race between shrinker map bit clear and reparenting by code inspection.
The hypothesis is elaborated as below.
The memcg hierarchy on our production environment looks like:
root
/ \
system user
The main workloads are running under user slice's children, and it
creates and removes memcg frequently. So reparenting happens very often
under user slice, but no task is under user slice directly.
So with the frequent reparenting and tight memory pressure, the below
hypothetical race condition may happen:
CPU A CPU B
reparent
dst->nr_items == 0
shrinker:
total_objects == 0
add src->nr_items to dst
set_bit
return SHRINK_EMPTY
clear_bit
child memcg offline
replace child's kmemcg_id with
parent's (in memcg_offline_kmem())
list_lru_del() between shrinker runs
see parent's kmemcg_id
dec dst->nr_items
reparent again
dst->nr_items may go negative
due to concurrent list_lru_del()
The second run of shrinker:
read nr_items without any
synchronization, so it may
see intermediate negative
nr_items then total_objects
may return 0 coincidently
keep the bit cleared
dst->nr_items != 0
skip set_bit
add scr->nr_item to dst
After this point dst->nr_item may never go zero, so reparenting will not
set shrinker_map bit anymore. And since there is no task under user
slice directly, so no new object will be added to its lru to set the
shrinker map bit either. That bit is kept cleared forever.
How does list_lru_del() race with reparenting? It is because reparenting
replaces children's kmemcg_id to parent's without protecting from
nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually
deleting items from child's lru, but dec'ing parent's nr_items, so the
parent's nr_items may go negative as commit 2788cf0c40 ("memcg:
reparent list_lrus and free kmemcg_id on css offline") says.
Since it is impossible that dst->nr_items goes negative and
src->nr_items goes zero at the same time, so it seems we could set the
shrinker map bit iff src->nr_items != 0. We could synchronize
list_lru_count_one() and reparenting with nlru->lock, but it seems
checking src->nr_items in reparenting is the simplest and avoids lock
contention.
Fixes: fae91d6d8b ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance")
Suggested-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.19]
Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bde3808bc8 upstream.
Fixes sparse warnings:
drivers/md/dm.c:508:12: warning: context imbalance in 'dm_prepare_ioctl' - wrong count at exit
drivers/md/dm.c:543:13: warning: context imbalance in 'dm_unprepare_ioctl' - wrong count at exit
Fixes: 971888c469 ("dm: hold DM table for duration of ioctl rather than use blkdev_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ea69a55b3 upstream.
With virtio multiqueue, normally each queue IRQ is mapped to a CPU.
Commit 0d9f0a52c8 ("virtio_scsi: use virtio IRQ affinity") exposed
an existing shortcoming of the arch code by moving virtio_scsi to
the automatic IRQ affinity assignment.
The affinity is correctly computed in msi_desc but this is not applied
to the system IRQs.
It appears the affinity is correctly passed to rtas_setup_msi_irqs() but
lost at this point and never passed to irq_domain_alloc_descs()
(see commit 06ee6d571f ("genirq: Add affinity hint to irq allocation"))
because irq_create_mapping() doesn't take an affinity parameter.
Use the new irq_create_mapping_affinity() function, which allows to forward
the affinity setting from rtas_setup_msi_irqs() to irq_domain_alloc_descs().
With this change, the virtqueues are correctly dispatched between the CPUs
on pseries.
Fixes: e75eafb9b0 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126082852.1178497-3-lvivier@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb4c6910c8 upstream.
There is currently no way to convey the affinity of an interrupt
via irq_create_mapping(), which creates issues for devices that
expect that affinity to be managed by the kernel.
In order to sort this out, rename irq_create_mapping() to
irq_create_mapping_affinity() with an additional affinity parameter that
can be passed down to irq_domain_alloc_descs().
irq_create_mapping() is re-implemented as a wrapper around
irq_create_mapping_affinity().
No functional change.
Fixes: e75eafb9b0 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126082852.1178497-2-lvivier@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67aa3ec3db upstream.
Advance the maximum number of arguments to 16.
This fixes issue where certain operations, combined with table
configured args, exceed 10 arguments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
