a27981ad08872974b14ca0d0d26faf1b45e1efc1
291 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
962d1816e1 |
Merge 5.15.86 into android14-5.15
Changes in 5.15.86
drm/amd/display: Manually adjust strobe for DCN303
usb: musb: remove extra check in musb_gadget_vbus_draw
arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
arm64: dts: qcom: msm8996: Add MSM8996 Pro support
arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables
arm64: dts: qcom: msm8996: fix GPU OPP table
ARM: dts: qcom: apq8064: fix coresight compatible
arm64: dts: qcom: sdm630: fix UART1 pin bias
arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
arm64: dts: qcom: msm8916: Drop MSS fallback compatible
objtool, kcsan: Add volatile read/write instrumentation to whitelist
ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name
arm64: dts: qcom: sm8250: correct LPASS pin pull down
soc: qcom: llcc: make irq truly optional
arm64: dts: qcom: Correct QMP PHY child node name
arm64: dts: qcom: sm8150: fix UFS PHY registers
arm64: dts: qcom: sm8250: fix UFS PHY registers
arm64: dts: qcom: sm8350: fix UFS PHY registers
arm64: dts: qcom: sm8250: drop bogus DP PHY clock
soc: qcom: apr: make code more reuseable
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
arm64: dts: qcom: sm6125: fix SDHCI CQE reg names
arm: dts: spear600: Fix clcd interrupt
soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
arm64: Treat ESR_ELx as a 64-bit register
arm64: mm: kfence: only handle translation faults
perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()
perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
arm64: dts: mt6779: Fix devicetree build warnings
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
arm64: dts: mt2712e: Fix unit address for pinctrl node
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: turris-omnia: Add switch port 6 node
arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC
seccomp: Move copy_seccomp() to no failure path.
pstore/ram: Fix error return code in ramoops_probe()
ARM: mmp: fix timer_read delay
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
ovl: store lower path in ovl_inode
ovl: use ovl_copy_{real,upper}attr() wrappers
ovl: remove privs in ovl_copyfile()
ovl: remove privs in ovl_fallocate()
sched/fair: Cleanup task_util and capacity type
sched/uclamp: Fix relationship between uclamp and migration margin
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
sched/fair: Removed useless update of p->recent_used_cpu
sched/core: Introduce sched_asym_cpucap_active()
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
cpuidle: dt: Return the correct numbers of parsed idle states
alpha: fix TIF_NOTIFY_SIGNAL handling
alpha: fix syscall entry in !AUDUT_SYSCALL case
x86/sgx: Reduce delay and interference of enclave release
PM: hibernate: Fix mistake in kerneldoc comment
fs: don't audit the capability check in simple_xattr_list()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
selftests/ftrace: event_triggers: wait longer for test_event_enable
perf: Fix possible memleak in pmu_dev_alloc()
lib/debugobjects: fix stat count and optimize debug_objects_mem_init
platform/x86: huawei-wmi: fix return value calculation
timerqueue: Use rb_entry_safe() in timerqueue_getnext()
proc: fixup uptime selftest
lib/fonts: fix undefined behavior in bit shift for get_default_font
ocfs2: fix memory leak in ocfs2_stack_glue_init()
MIPS: vpe-mt: fix possible memory leak while module exiting
MIPS: vpe-cmp: fix possible memory leak while module exiting
selftests/efivarfs: Add checking of the test return value
PNP: fix name memory leak in pnp_alloc_dev()
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
thermal: core: fix some possible name leaks in error paths
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
SUNRPC: Return true/false (not 1/0) from bool functions
NFSD: Finish converting the NFSv2 GETACL result encoder
nfsd: don't call nfsd_file_put from client states seqfile display
genirq/irqdesc: Don't try to remove non-existing sysfs files
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
lib/notifier-error-inject: fix error when writing -errno to debugfs file
debugfs: fix error when writing negative value to atomic_t debugfs file
rapidio: fix possible name leaks when rio_add_device() fails
rapidio: rio: fix possible name leak in rio_register_mport()
clocksource/drivers/sh_cmt: Access registers according to spec
mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem
mips: ralink: mt7621: soc queries and tests as functions
mips: ralink: mt7621: do not use kzalloc too early
futex: Move to kernel/futex/
futex: Resend potentially swallowed owner death notification
cpu/hotplug: Make target_store() a nop when target == state
cpu/hotplug: Do not bail-out in DYING/STARTING sections
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
x86/xen: Fix memory leak in xen_init_lock_cpu()
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_ec_typec: zero out stale pointers
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
MIPS: BCM63xx: Add check for NULL for clk in clk_enable
MIPS: OCTEON: warn only once if deprecated link status is being used
lockd: set other missing fields when unlocking files
fs: sysv: Fix sysv_nblocks() returns wrong value
rapidio: fix possible UAF when kfifo_alloc() fails
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
relay: fix type mismatch when allocating memory in relay_create_buf()
hfs: Fix OOB Write in hfs_asc2mac
rapidio: devices: fix missing put_device in mport_cdev_open
platform/mellanox: mlxbf-pmc: Fix event typo
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
wifi: rtl8xxxu: Fix reading the vendor of combo chips
drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
libbpf: Fix use-after-free in btf_dump_name_dups
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros
ata: add/use ata_taskfile::{error|status} fields
ata: libata: fix NCQ autosense logic
ipmi: kcs: Poll OBF briefly to reduce OBE latency
drm/amdgpu/powerplay/psm: Fix memory leak in power state init
media: v4l2-ctrls: Fix off-by-one error in integer menu control check
media: coda: jpeg: Add check for kmalloc
media: adv748x: afe: Select input port when initializing AFE
media: i2c: ad5820: Fix error path
venus: pm_helpers: Fix error check in vcodec_domains_get()
soreuseport: Fix socket selection for SO_INCOMING_CPU.
media: exynos4-is: don't rely on the v4l2_async_subdev internals
libbpf: Btf dedup identical struct test needs check for nested structs/arrays
can: kvaser_usb: do not increase tx statistics when sending error message frames
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
can: kvaser_usb_leaf: Set Warning state even without bus errors
can: kvaser_usb: make use of units.h in assignment of frequency
can: kvaser_usb_leaf: Fix improved state not being reported
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
can: kvaser_usb_leaf: Fix bogus restart events
can: kvaser_usb: Add struct kvaser_usb_busparams
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
drm/rockchip: lvds: fix PM usage counter unbalance in poweron
clk: renesas: r9a06g032: Repair grave increment error
spi: Update reference to struct spi_controller
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
ima: Handle -ESTALE returned by ima_filter_rule_match()
drm/msm/hdmi: drop unused GPIO support
drm/msm/hdmi: use devres helper for runtime PM management
bpf: Fix slot type check in check_stack_write_var_off
media: vivid: fix compose size exceed boundary
media: platform: exynos4-is: fix return value check in fimc_md_probe()
bpf: propagate precision in ALU/ALU64 operations
bpf: Check the other end of slot_type for STACK_SPILL
bpf: propagate precision across all frames, not just the last one
clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
mtd: Fix device name leak when register device failed in add_mtd_device()
Input: joystick - fix Kconfig warning for JOYSTICK_ADC
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
media: camss: Clean up received buffers on failed start of streaming
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
rxrpc: Fix ack.bufferSize to be 0 when generating an ack
bfq: fix waker_bfqq inconsistency crash
drm/radeon: Add the missed acpi_put_table() to fix memory leak
drm/mediatek: Modify dpi power on/off sequence.
ASoC: pxa: fix null-pointer dereference in filter()
libbpf: Fix uninitialized warning in btf_dump_dump_type_data
nvmet: only allocate a single slab for bvecs
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
nvme: return err on nvme_init_non_mdts_limits fail
regulator: qcom-rpmh: Fix PMR735a S3 regulator spec
drm/fourcc: Add packed 10bit YUV 4:2:0 format
drm/fourcc: Fix vsub/hsub for Q410 and Q401
integrity: Fix memory leakage in keyring allocation error path
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
block: clear ->slave_dir when dropping the main slave_dir reference
wifi: ath10k: Fix return value in ath10k_pci_init()
drm/msm/a6xx: Fix speed-bin detection vs probe-defer
mtd: lpddr2_nvm: Fix possible null-ptr-deref
Input: elants_i2c - properly handle the reset GPIO when power is off
media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
media: solo6x10: fix possible memory leak in solo_sysfs_init()
media: platform: exynos4-is: Fix error handling in fimc_md_init()
media: videobuf-dma-contig: use dma_mmap_coherent
inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
mtd: spi-nor: hide jedec_id sysfs attribute if not present
mtd: spi-nor: Fix the number of bytes for the dummy cycles
bpf: Move skb->len == 0 checks into __bpf_redirect
HID: hid-sensor-custom: set fixed size for custom attributes
pinctrl: k210: call of_node_put()
ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
regulator: core: use kfree_const() to free space conditionally
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
drm/amdgpu: fix pci device refcount leak
bonding: fix link recovery in mode 2 when updelay is nonzero
mtd: maps: pxa2xx-flash: fix memory leak in probe
drbd: remove call to memset before free device/resource/connection
drbd: destroy workqueue when drbd device was freed
ASoC: qcom: Add checks for devm_kcalloc
media: vimc: Fix wrong function called when vimc_init() fails
media: imon: fix a race condition in send_packet()
clk: imx8mn: rename vpu_pll to m7_alt_pll
clk: imx: replace osc_hdmi with dummy
clk: imx8mn: fix imx8mn_sai2_sels clocks list
clk: imx8mn: fix imx8mn_enet_phy_sels clocks list
pinctrl: pinconf-generic: add missing of_node_put()
media: dvb-core: Fix ignored return value in dvb_register_frontend()
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
ASoC: dt-bindings: wcd9335: fix reset line polarity in example
ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
NFSv4.2: Fix a memory stomp in decode_attr_security_label
NFSv4.2: Fix initialisation of struct nfs4_label
NFSv4: Fix a credential leak in _nfs4_discover_trunking()
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
NFS: Fix an Oops in nfs_d_automount()
ALSA: asihpi: fix missing pci_disable_device()
wifi: iwlwifi: mvm: fix double free on tx path.
ASoC: mediatek: mt8173: Fix debugfs registration for components
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
drm/amd/pm/smu11: BACO is supported when it's in BACO state
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
drm/amdkfd: Fix memory leakage
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
netfilter: conntrack: set icmpv6 redirects as RELATED
Input: wistron_btns - disable on UML
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes
bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
bonding: uninitialized variable in bond_miimon_inspect()
spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
wifi: mac80211: fix memory leak in ieee80211_if_add()
wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
mt76: stop the radar detector after leaving dfs channel
wifi: mt76: mt7921: fix reporting of TX AGGR histogram
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
regulator: core: fix module refcount leak in set_supply()
clk: qcom: lpass-sc7180: Fix pm_runtime usage
clk: qcom: clk-krait: fix wrong div2 functions
hsr: Add a rcu-read lock to hsr_forward_skb().
hsr: Avoid double remove of a node.
hsr: Disable netpoll.
hsr: Synchronize sending frames to have always incremented outgoing seq nr.
hsr: Synchronize sequence number updates.
configfs: fix possible memory leak in configfs_create_dir()
regulator: core: fix resource leak in regulator_register()
hwmon: (jc42) Convert register access and caching to regmap/regcache
hwmon: (jc42) Restore the min/max/critical temperatures on resume
bpf, sockmap: fix race in sock_map_free()
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
media: saa7164: fix missing pci_disable_device()
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
SUNRPC: Fix missing release socket in rpc_sockname()
NFSv4.x: Fail client initialisation if state manager thread can't run
riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC
mmc: alcor: fix return value check of mmc_add_host()
mmc: moxart: fix return value check of mmc_add_host()
mmc: mxcmmc: fix return value check of mmc_add_host()
mmc: pxamci: fix return value check of mmc_add_host()
mmc: rtsx_pci: fix return value check of mmc_add_host()
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
mmc: toshsd: fix return value check of mmc_add_host()
mmc: vub300: fix return value check of mmc_add_host()
mmc: wmt-sdmmc: fix return value check of mmc_add_host()
mmc: atmel-mci: fix return value check of mmc_add_host()
mmc: omap_hsmmc: fix return value check of mmc_add_host()
mmc: meson-gx: fix return value check of mmc_add_host()
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc: wbsd: fix return value check of mmc_add_host()
mmc: mmci: fix return value check of mmc_add_host()
mmc: renesas_sdhi: alway populate SCC pointer
memstick: ms_block: Add error handling support for add_disk()
memstick/ms_block: Add check for alloc_ordered_workqueue
mmc: core: Normalize the error handling branch in sd_read_ext_regs()
regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
media: c8sectpfe: Add of_node_put() when breaking out of loop
media: coda: Add check for dcoda_iram_alloc
media: coda: Add check for kmalloc
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
wifi: rtl8xxxu: Fix the channel width reporting
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
blktrace: Fix output non-blktrace event when blk_classic option enabled
bpf: Do not zero-extend kfunc return values
clk: socfpga: Fix memory leak in socfpga_gate_init()
net: vmw_vsock: vmci: Check memcpy_from_msg()
net: defxx: Fix missing err handling in dfx_init()
net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
net: stmmac: fix possible memory leak in stmmac_dvr_probe()
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
net: farsync: Fix kmemleak when rmmods farsync
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
af_unix: call proto_unregister() in the error path in af_unix_init()
net: amd-xgbe: Fix logic around active and passive cables
net: amd-xgbe: Check only the minimum speed for active/passive cables
can: tcan4x5x: Remove invalid write in clear_interrupts
can: m_can: Call the RAM init directly from m_can_chip_config
can: tcan4x5x: Fix use of register error status mask
net: lan9303: Fix read error execution path
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
sctp: sysctl: make extra pointers netns aware
Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
stmmac: fix potential division by 0
i40e: Fix the inability to attach XDP program on downed interface
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
apparmor: fix a memleak in multi_transaction_new()
apparmor: fix lockdep warning when removing a namespace
apparmor: Fix abi check to include v8 abi
crypto: hisilicon/qm - fix missing destroy qp_idr
crypto: sun8i-ss - use dma_addr instead u32
crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
scsi: core: Fix a race between scsi_done() and scsi_timeout()
apparmor: Use pointer to struct aa_label for lbs_cred
PCI: dwc: Fix n_fts[] array overrun
RDMA/core: Fix order of nldev_exit call
PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
f2fs: Fix the race condition of resize flag between resizefs
crypto: rockchip - do not do custom power management
crypto: rockchip - do not store mode globally
crypto: rockchip - add fallback for cipher
crypto: rockchip - add fallback for ahash
crypto: rockchip - better handle cipher key
crypto: rockchip - remove non-aligned handling
crypto: rockchip - rework by using crypto_engine
apparmor: Fix memleak in alloc_ns()
f2fs: fix to invalidate dcc->f2fs_issue_discard in error path
f2fs: fix normal discard process
f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()
RDMA/irdma: Report the correct link speed
scsi: qla2xxx: Fix set-but-not-used variable warnings
RDMA/siw: Fix immediate work request flush to completion queue
IB/mad: Don't call to function that might sleep while in atomic context
PCI: vmd: Disable MSI remapping after suspend
RDMA/restrack: Release MR restrack when delete
RDMA/core: Make sure "ib_port" is valid when access sysfs node
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
RDMA/siw: Set defined status for work completion with undefined status
scsi: scsi_debug: Fix a warning in resp_write_scat()
crypto: ccree - Remove debugfs when platform_driver_register failed
crypto: cryptd - Use request context instead of stack for sub-request
crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
RDMA/hns: Fix ext_sge num error when post send
PCI: Check for alloc failure in pci_request_irq()
RDMA/hfi: Decrease PCI device reference count in error path
crypto: ccree - Make cc_debugfs_global_fini() available for module init function
RDMA/hns: fix memory leak in hns_roce_alloc_mr()
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
dt-bindings: visconti-pcie: Fix interrupts array max constraints
scsi: hpsa: Fix possible memory leak in hpsa_init_one()
crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
padata: Always leave BHs disabled when running ->parallel()
padata: Fix list iterator in padata_do_serial()
scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
scsi: hpsa: Fix error handling in hpsa_add_sas_host()
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
scsi: efct: Fix possible memleak in efct_device_init()
scsi: scsi_debug: Fix a warning in resp_verify()
scsi: scsi_debug: Fix a warning in resp_report_zones()
scsi: fcoe: Fix possible name leak when device_register() fails
scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
scsi: ipr: Fix WARNING in ipr_init()
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: snic: Fix possible UAF in snic_tgt_create()
RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
f2fs: avoid victim selection from previous victim section
RDMA/nldev: Fix failure to send large messages
crypto: amlogic - Remove kcalloc without check
crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()
riscv/mm: add arch hook arch_clear_hugepage_flags
RDMA/hfi1: Fix error return code in parse_platform_config()
RDMA/srp: Fix error return code in srp_parse_options()
PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_
PCI: mt7621: Add sentinel to quirks table
orangefs: Fix sysfs not cleanup when dev init failed
RDMA/hns: Fix AH attr queried by query_qp
RDMA/hns: Fix PBL page MTR find
RDMA/hns: Fix page size cap from firmware
RDMA/hns: Fix error code of CMD
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
hwrng: amd - Fix PCI device refcount leak
hwrng: geode - Fix PCI device refcount leak
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
RISC-V: Align the shadow stack
drivers: dio: fix possible memory leak in dio_init()
serial: tegra: Read DMA status before terminating
serial: 8250_bcm7271: Fix error handling in brcmuart_init()
class: fix possible memory leak in __class_register()
vfio: platform: Do not pass return buffer to ACPI _RST method
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
uio: uio_dmem_genirq: Fix deadlock between irq config and handling
usb: fotg210-udc: Fix ages old endianness issues
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails
usb: typec: tipd: Fix spurious fwnode_handle_put in error path
extcon: usbc-tusb320: Add support for mode setting and reset
extcon: usbc-tusb320: Add support for TUSB320L
usb: typec: Factor out non-PD fwnode properties
extcon: usbc-tusb320: Factor out extcon into dedicated functions
extcon: usbc-tusb320: Add USB TYPE-C support
extcon: usbc-tusb320: Update state on probe even if no IRQ pending
serial: amba-pl011: avoid SBSA UART accessing DMACR register
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: stm32: move dma_request_chan() before clk_prepare_enable()
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: clean up stop-tx part in altera_uart_tx_chars()
tty: serial: altera_uart_{r,t}x_chars() need only uart_port
serial: altera_uart: fix locking in polling mode
serial: sunsab: Fix error handling in sunsab_init()
test_firmware: fix memory leak in test_firmware_init()
misc: ocxl: fix possible name leak in ocxl_file_register_afu()
ocxl: fix pci device refcount leak when calling get_function_0()
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
iio: temperature: ltc2983: make bulk write buffer DMA-safe
iio: adis: handle devices that cannot unmask the drdy pin
iio: adis: stylistic changes
iio:imu:adis: Move exports into IIO_ADISLIB namespace
iio: adis: add '__adis_enable_irq()' implementation
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
coresight: trbe: remove cpuhp instance node before remove cpuhp state
usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
usb: gadget: f_hid: fix refcount leak on error path
drivers: mcb: fix resource leak in mcb_probe()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
chardev: fix error handling in cdev_device_add()
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
staging: rtl8192u: Fix use after free in ieee80211_rx()
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
vme: Fix error not catched in fake_init()
gpiolib: Get rid of redundant 'else'
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: make struct comments into real kernel docs
gpiolib: protect the GPIO device against being dropped while in use by user-space
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
usb: storage: Add check for kcalloc
tracing/hist: Fix issue of losting command info in error_log
ksmbd: Fix resource leak in ksmbd_session_rpc_open()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
thermal/drivers/imx8mm_thermal: Validate temperature range
thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
thermal/drivers/qcom/lmh: Fix irq handler return value
fbdev: ssd1307fb: Drop optional dependency
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: via: Fix error in via_core_init()
fbdev: vermilion: decrease reference count in error path
fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
fbdev: geode: don't build on UML
fbdev: uvesafb: don't build on UML
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
power: supply: fix residue sysfs file in error handle route of __power_supply_register()
perf trace: Return error if a system call doesn't exist
perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
perf trace: Handle failure when trace point folder is missed
perf symbol: correction while adjusting symbol
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
HSI: omap_ssi_core: Fix error handling in ssi_init()
power: supply: ab8500: Fix error handling in ab8500_charger_init()
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
perf stat: Refactor __run_perf_stat() common code
perf stat: Do not delay the workload with --delay
RDMA/siw: Fix pointer cast warning
fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()
overflow: Implement size_t saturating arithmetic helpers
fs/ntfs3: Harden against integer overflows
iommu/sun50i: Fix reset release
iommu/sun50i: Consider all fault sources for reset
iommu/sun50i: Fix R/W permission check
iommu/sun50i: Fix flush size
iommu/rockchip: fix permission bits in page table entries v2
phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
include/uapi/linux/swab: Fix potentially missing __always_inline
pwm: tegra: Improve required rate calculation
fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs
dmaengine: idxd: Fix crc_val field for completion record
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: cmos: Fix event handler registration ordering issue
rtc: cmos: Fix wake alarm breakage
rtc: cmos: fix build on non-ACPI platforms
rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
rtc: cmos: Eliminate forward declarations of some functions
rtc: cmos: Rename ACPI-related functions
rtc: cmos: Disable ACPI RTC event on removal
rtc: snvs: Allow a time difference on clock register read
rtc: pcf85063: Fix reading alarm
iommu/amd: Fix pci device refcount leak in ppr_notifier()
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
macintosh: fix possible memory leak in macio_add_one_device()
macintosh/macio-adb: check the return value of ioremap()
powerpc/52xx: Fix a resource leak in an error handling path
cxl: Fix refcount leak in cxl_calc_capp_routing
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
powerpc/perf: callchain validate kernel stack pointer bounds
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
powerpc/hv-gpci: Fix hv_gpci event list
selftests/powerpc: Fix resource leaks
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm
pwm: mediatek: always use bus clock for PWM on MT7622
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/pseries/eeh: use correct API for error log size
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: pm8008: Remove driver data structure pm8008_data
mfd: pm8008: Fix return value check in pm8008_probe()
netfilter: flowtable: really fix NAT IPv6 offload
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
rtc: pcf85063: fix pcf85063_clkout_control
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
net: macsec: fix net device access prior to holding a lock
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
block, bfq: fix possible uaf for 'bfqq->bic'
selftests/bpf: Add test for unstable CT lookup API
net: enetc: avoid buffer leaks on xdp_do_redirect() failure
nfc: pn533: Clear nfc_target before being used
unix: Fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
r6040: Fix kmemleak in probe and remove
igc: Enhance Qbv scheduling by using first flag bit
igc: Use strict cycles for Qbv scheduling
igc: Add checking for basetime less than zero
igc: allow BaseTime 0 enrollment for Qbv
igc: recalculate Qbv end_time by considering cycle time
igc: Lift TAPRIO schedule restriction
igc: Set Qbv start_time and end_time to end_time if not being configured in GCL
rtc: mxc_v2: Add missing clk_disable_unprepare()
selftests: devlink: fix the fd redirect in dummy_reporter_test
openvswitch: Fix flow lookup to use unmasked key
soc: mediatek: pm-domains: Fix the power glitch issue
arm64: dts: mt8183: Fix Mali GPU clock
skbuff: Account for tail adjustment during pull operations
mailbox: mpfs: read the system controller's status
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
mailbox: zynq-ipi: fix error handling while device_register() fails
net_sched: reject TCF_EM_SIMPLE case for complex ematch module
rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
myri10ge: Fix an error handling path in myri10ge_probe()
net: stream: purge sk_error_queue in sk_stream_kill_queues()
HID: amd_sfh: Add missing check for dma_alloc_coherent
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
arm64: make is_ttbrX_addr() noinstr-safe
video: hyperv_fb: Avoid taking busy spinlock on panic path
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
binfmt_misc: fix shift-out-of-bounds in check_special_flags
fs: jfs: fix shift-out-of-bounds in dbAllocAG
udf: Avoid double brelse() in udf_rename()
jfs: Fix fortify moan in symlink
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
ACPICA: Fix error code path in acpi_ds_call_control_method()
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
acct: fix potential integer overflow in encode_comp_t()
hfs: fix OOB Read in __hfs_brec_find
drm/etnaviv: add missing quirks for GC300
media: imx-jpeg: Disable useless interrupt to avoid kernel panic
brcmfmac: return error when getting invalid max_flowrings from dongle
wifi: ath9k: verify the expected usb_endpoints are present
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
ipmi: fix memleak when unload ipmi driver
drm/amd/display: prevent memory leak
Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"
qed (gcc13): use u16 for fid to be big enough
bpf: make sure skb->len != 0 when redirecting to a tunneling device
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
hamradio: baycom_epp: Fix return type of baycom_send_packet()
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
igb: Do not free q_vector unless new one was allocated
drm/amdgpu: Fix type of second parameter in trans_msg() callback
drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
s390/ctcm: Fix return type of ctc{mp,}m_tx()
s390/netiucv: Fix return type of netiucv_tx()
s390/lcs: Fix return type of lcs_start_xmit()
drm/msm: Use drm_mode_copy()
drm/rockchip: Use drm_mode_copy()
drm/sti: Use drm_mode_copy()
drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
md/raid1: stop mdx_raid1 thread when raid1 array run failed
drm/amd/display: fix array index out of bound error in bios parser
net: add atomic_long_t to net_device_stats fields
ipv6/sit: use DEV_STATS_INC() to avoid data-races
mrp: introduce active flags to prevent UAF when applicant uninit
ppp: associate skb with a device at tx
bpf: Prevent decl_tag from being referenced in func_proto arg
ethtool: avoiding integer overflow in ethtool_phys_id()
media: dvb-frontends: fix leak of memory fw
media: dvbdev: adopts refcnt to avoid UAF
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
blk-mq: fix possible memleak when register 'hctx' failed
drm/amd/display: Use the largest vready_offset in pipe group
libbpf: Avoid enum forward-declarations in public API in C++ mode
regulator: core: fix use_count leakage when handling boot-on
wifi: mt76: do not run mt76u_status_worker if the device is not running
mmc: f-sdh30: Add quirks for broken timeout clock capability
mmc: renesas_sdhi: better reset from HS400 mode
media: si470x: Fix use-after-free in si470x_int_in_callback()
clk: st: Fix memory leak in st_of_quadfs_setup()
crypto: hisilicon/hpre - fix resource leak in remove process
scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs
scsi: ufs: Reduce the START STOP UNIT timeout
scsi: elx: libefc: Fix second parameter type in state callbacks
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
tools/include: Add _RET_IP_ and math definitions to kernel.h
KVM: selftests: Fix build regression by using accessor function
hwmon: (jc42) Fix missing unlock on error in jc42_write()
ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
ALSA: hda: add snd_hdac_stop_streams() helper
ASoC: Intel: Skylake: Fix driver hang during shutdown
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
ASoC: wm8994: Fix potential deadlock
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: rt5670: Remove unbalanced pm_runtime_put()
drm/i915/display: Don't disable DDI/Transcoder when setting phy test pattern
LoadPin: Ignore the "contents" argument of the LSM hooks
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
afs: Fix lost servers_outstanding count
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
ima: Simplify ima_lsm_copy_rule
ALSA: usb-audio: add the quirk for KT0206 device
ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
usb: cdnsp: fix lack of ZLP for ep0
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
arm64: dts: qcom: sm8250: fix USB-DP PHY registers
usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
usb: dwc3: core: defer probe on ulpi_read_id timeout
xhci: Prevent infinite loop in transaction errors recovery for streams
HID: wacom: Ensure bootloader PID is usable in hidraw mode
HID: mcp2221: don't connect hidraw
loop: Fix the max_loop commandline argument treatment when it is set to 0
9p: set req refcount to zero to avoid uninitialized usage
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
reiserfs: Add missing calls to reiserfs_security_free()
iio: fix memory leak in iio_device_register_eventset()
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
iio: adc128s052: add proper .data members in adc128_of_match table
regulator: core: fix deadlock on regulator enable
floppy: Fix memory leak in do_floppy_init()
gcov: add support for checksum field
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
ovl: fix use inode directly in rcu-walk mode
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
scsi: qla2xxx: Fix crash when I/O abort times out
net: stmmac: fix errno when create_singlethread_workqueue() fails
media: dvbdev: fix build warning due to comments
media: dvbdev: fix refcnt bug
extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
pwm: tegra: Fix 32 bit build
Linux 5.15.86
Change-Id: Ic157edd6a65abf4a3167b5d227edeb0564f1be4e
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
Yang Yingliang
|
c444f58fda |
scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
[ Upstream commit e6d773f93a49e0eda88a903a2a6542ca83380eb1 ] Afer commit |
||
Harshit Mogalapalli
|
0f5006d7d1 |
scsi: scsi_debug: Fix a warning in resp_report_zones()
[ Upstream commit 07f2ca139d9a7a1ba71c4c03997c8de161db2346 ]
As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
||
|
Harshit Mogalapalli
|
2432719b1a |
scsi: scsi_debug: Fix a warning in resp_verify()
[ Upstream commit ed0f17b748b20271cb568c7ca0b23b120316a47d ]
As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes:
|
||
|
Harshit Mogalapalli
|
0328ca389a |
scsi: scsi_debug: Fix a warning in resp_write_scat()
[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ]
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes:
|
||
|
Greg Kroah-Hartman
|
880a2689a3 |
Merge 5.15.81 into android14-5.15
Changes in 5.15.81 ASoC: fsl_sai: use local device pointer ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N serial: Add rs485_supported to uart_port serial: fsl_lpuart: Fill in rs485_supported tty: serial: fsl_lpuart: don't break the on-going transfer when global reset sctp: remove the unnecessary sinfo_stream check in sctp_prsctp_prune_unsent sctp: clear out_curr if all frag chunks of current msg are pruned cifs: introduce new helper for cifs_reconnect() cifs: split out dfs code from cifs_reconnect() cifs: support nested dfs links over reconnect cifs: Fix connections leak when tlink setup failed ata: libata-scsi: simplify __ata_scsi_queuecmd() ata: libata-core: do not issue non-internal commands once EH is pending drm/display: Don't assume dual mode adaptors support i2c sub-addressing nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro nvme-pci: disable namespace identifiers for the MAXIO MAP1001 nvme-pci: disable write zeroes on various Kingston SSD nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 iio: ms5611: Simplify IO callback parameters iio: pressure: ms5611: fixed value compensation bug ceph: do not update snapshot context when there is no new snapshot ceph: avoid putting the realm twice when decoding snaps fails x86/sgx: Create utility to validate user provided offset and length x86/sgx: Add overflow check in sgx_validate_offset_length() binder: validate alloc->mm in ->mmap() handler ceph: Use kcalloc for allocating multiple elements ceph: fix NULL pointer dereference for req->r_session wifi: mac80211: fix memory free error when registering wiphy fail wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support riscv: dts: sifive unleashed: Add PWM controlled LEDs audit: fix undefined behavior in bit shift for AUDIT_BIT wifi: airo: do not assign -1 to unsigned char wifi: mac80211: Fix ack frame idr leak when mesh has no route wifi: ath11k: Fix QCN9074 firmware boot on x86 spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run selftests/bpf: Add verifier test for release_reference() Revert "net: macsec: report real_dev features when HW offloading is enabled" platform/x86: ideapad-laptop: Disable touchpad_switch platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1 platform/x86/intel/pmt: Sapphire Rapids PMT errata fix platform/x86/intel/hid: Add some ACPI device IDs scsi: ibmvfc: Avoid path failures during live migration scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017) block, bfq: fix null pointer dereference in bfq_bio_bfqg() arm64/syscall: Include asm/ptrace.h in syscall_wrapper header. nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly"" ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue RISC-V: vdso: Do not add missing symbols to version section in linker script MIPS: pic32: treat port as signed integer xfrm: fix "disable_policy" on ipv4 early demux xfrm: replay: Fix ESN wrap around for GSO af_key: Fix send_acquire race with pfkey_register ARM: dts: am335x-pcm-953: Define fixed regulators in root node ASoC: hdac_hda: fix hda pcm buffer overflow issue ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open() x86/hyperv: Restore VP assist page after cpu offlining/onlining scsi: storvsc: Fix handling of srb_status and capacity change events ASoC: max98373: Add checks for devm_kcalloc regulator: core: fix kobject release warning and memory leak in regulator_register() spi: dw-dma: decrease reference count in dw_spi_dma_init_mfld() regulator: core: fix UAF in destroy_regulator() bus: sunxi-rsb: Remove the shutdown callback bus: sunxi-rsb: Support atomic transfers tee: optee: fix possible memory leak in optee_register_device() ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl selftests: mptcp: more stable simult_flows tests selftests: mptcp: fix mibit vs mbit mix up net: liquidio: simplify if expression rxrpc: Allow list of in-use local UDP endpoints to be viewed in /proc rxrpc: Use refcount_t rather than atomic_t rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975] net: dsa: sja1105: disallow C45 transactions on the BASE-TX MDIO bus nfc/nci: fix race with opening and closing net: pch_gbe: fix potential memleak in pch_gbe_tx_queue() 9p/fd: fix issue of list_del corruption in p9_fd_cancel() netfilter: conntrack: Fix data-races around ct mark netfilter: nf_tables: do not set up extensions for end interval iavf: Fix a crash during reset task iavf: Do not restart Tx queues after reset task failure iavf: Fix race condition between iavf_shutdown and iavf_remove ARM: mxs: fix memory leak in mxs_machine_init() ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties net: ethernet: mtk_eth_soc: fix error handling in mtk_open() net/mlx4: Check retval of mlx4_bitmap_init net: mvpp2: fix possible invalid pointer dereference net/qla3xxx: fix potential memleak in ql3xxx_send() octeontx2-af: debugsfs: fix pci device refcount leak net: pch_gbe: fix pci device refcount leak while module exiting nfp: fill splittable of devlink_port_attrs correctly nfp: add port from netdev validation for EEPROM access macsec: Fix invalid error code set Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work() Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register() netfilter: ipset: regression in ip_set_hash_ip.c net/mlx5: Do not query pci info while pci disabled net/mlx5: Fix FW tracer timestamp calculation net/mlx5: Fix handling of entry refcount when command is not issued to FW tipc: set con sock in tipc_conn_alloc tipc: add an extra conn_get in tipc_conn_alloc tipc: check skb_linearize() return value in tipc_disc_rcv() xfrm: Fix oops in __xfrm_state_delete() xfrm: Fix ignored return value in xfrm6_init() net: wwan: iosm: use ACPI_FREE() but not kfree() in ipc_pcie_read_bios_cfg() sfc: fix potential memleak in __ef100_hard_start_xmit() net: sparx5: fix error handling in sparx5_port_open() net: sched: allow act_ct to be built without NF_NAT NFC: nci: fix memory leak in nci_rx_data_packet() regulator: twl6030: re-add TWL6032_SUBCLASS bnx2x: fix pci device refcount leak in bnx2x_vf_is_pcie_pending() dma-buf: fix racing conflict of dma_heap_add() netfilter: ipset: restore allowing 64 clashing elements in hash:net,iface netfilter: flowtable_offload: add missing locking fs: do not update freeing inode i_io_list dccp/tcp: Reset saddr on failure after inet6?_hash_connect(). ipv4: Fix error return code in fib_table_insert() arcnet: fix potential memory leak in com20020_probe() s390/dasd: fix no record found for raw_track_access nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION nfc: st-nci: fix memory leaks in EVT_TRANSACTION nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION net: enetc: manage ENETC_F_QBV in priv->active_offloads only when enabled net: enetc: cache accesses to &priv->si->hw net: enetc: preserve TX ring priority across reconfiguration octeontx2-pf: Add check for devm_kcalloc octeontx2-af: Fix reference count issue in rvu_sdp_init() net: thunderx: Fix the ACPI memory leak s390/crashdump: fix TOD programmable field size lib/vdso: use "grep -E" instead of "egrep" init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash nios2: add FORCE for vmlinuz.gz mmc: sdhci-brcmstb: Re-organize flags mmc: sdhci-brcmstb: Enable Clock Gating to save power mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI KVM: arm64: pkvm: Fixup boot mode to reflect that the kernel resumes from EL1 usb: dwc3: exynos: Fix remove() function usb: cdnsp: Fix issue with Clear Feature Halt Endpoint usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1 ext4: fix use-after-free in ext4_ext_shift_extents arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency iio: light: apds9960: fix wrong register for gesture gain iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails bus: ixp4xx: Don't touch bit 7 on IXP42x usb: dwc3: gadget: conditionally remove requests usb: dwc3: gadget: Return -ESHUTDOWN on ep disable usb: dwc3: gadget: Clear ep descriptor last nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty gcov: clang: fix the buffer overflow issue mm: vmscan: fix extreme overreclaim and swap floods KVM: x86: nSVM: leave nested mode on vCPU free KVM: x86: forcibly leave nested mode on vCPU reset KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use KVM: x86: add kvm_leave_nested KVM: x86: remove exit_int_info warning in svm_handle_exit x86/tsx: Add a feature bit for TSX control MSR support x86/pm: Add enumeration check before spec MSRs save/restore setup x86/ioremap: Fix page aligned size calculation in __ioremap_caller() Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01 tools: iio: iio_generic_buffer: Fix read size serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios() Input: goodix - try resetting the controller when no config is set Input: soc_button_array - add use_low_level_irq module parameter Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[] Input: i8042 - apply probe defer to more ASUS ZenBook models ASoC: stm32: dfsdm: manage cb buffers cleanup xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too xen/platform-pci: add missing free_irq() in error path platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr() platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017) drm/amdgpu: disable BACO support on more cards zonefs: fix zone report size in __zonefs_io_error() platform/x86: hp-wmi: Ignore Smart Experience App event platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops tcp: configurable source port perturb table size net: usb: qmi_wwan: add Telit 0x103a composition scsi: iscsi: Fix possible memory leak when device_register() failed gpu: host1x: Avoid trying to use GART on Tegra20 dm integrity: flush the journal on suspend dm integrity: clear the journal on suspend fuse: lock inode unconditionally in fuse_fallocate() wifi: wilc1000: validate pairwise and authentication suite offsets wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute wifi: wilc1000: validate number of channels genirq/msi: Shutdown managed interrupts with unsatifiable affinities genirq: Always limit the affinity to online CPUs irqchip/gic-v3: Always trust the managed affinity provided by the core code genirq: Take the proposed affinity at face value if force==true btrfs: free btrfs_path before copying root refs to userspace btrfs: free btrfs_path before copying fspath to userspace btrfs: free btrfs_path before copying subvol info to userspace btrfs: zoned: fix missing endianness conversion in sb_write_pointer btrfs: use kvcalloc in btrfs_get_dev_zone_info btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs() drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASAN drm/amd/display: No display after resume from WB/CB drm/amdgpu: Enable Aldebaran devices to report CU Occupancy drm/amdgpu: always register an MMU notifier for userptr drm/i915: fix TLB invalidation for Gen12 video and compute engines cifs: fix missed refcounting of ipc tcon Linux 5.15.81 Change-Id: I9fe677a5bc83d3484f86aebbe20dd129c7ca3a42 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
Bart Van Assche
|
b90e6234f5 |
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
[ Upstream commit ecb8c2580d37dbb641451049376d80c8afaa387f ] From ZBC-1: - RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the highest LBA of a contiguous range of zones that are not sequential write required zones starting with the first zone. - RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA of the last logical block on the logical unit. The current scsi_debug READ CAPACITY response does not comply with the above if there are one or more sequential write required zones. SCSI initiators need a way to retrieve the largest valid LBA from SCSI devices. Reporting the largest valid LBA if there are one or more sequential zones requires to set the RC BASIS field in the READ CAPACITY response to one. Hence this patch. Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Greg Kroah-Hartman
|
f5ea8b2710 |
Merge 5.15.80 into android14-5.15
Changes in 5.15.80 mm: hwpoison: refactor refcount check handling mm: hwpoison: handle non-anonymous THP correctly mm: shmem: don't truncate page if memory failure happens ASoC: wm5102: Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe" ASoC: wm5110: Revert "ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe" ASoC: wm8997: Revert "ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe" ASoC: mt6660: Keep the pm_runtime enables before component stuff in mt6660_i2c_probe ASoC: rt1019: Fix the TDM settings ASoC: wm8962: Add an event handler for TEMP_HP and TEMP_SPK spi: intel: Fix the offset to get the 64K erase opcode ASoC: codecs: jz4725b: add missed Line In power control bit ASoC: codecs: jz4725b: fix reported volume for Master ctl ASoC: codecs: jz4725b: use right control for Capture Volume ASoC: codecs: jz4725b: fix capture selector naming ASoC: Intel: sof_sdw: add quirk variant for LAPBC710 NUC15 selftests/futex: fix build for clang selftests/intel_pstate: fix build for ARCH=x86_64 ASoC: rt1308-sdw: add the default value of some registers drm/amd/display: Remove wrong pipe control lock ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[] RDMA/efa: Add EFA 0xefa2 PCI ID btrfs: raid56: properly handle the error when unable to find the missing stripe NFSv4: Retry LOCK on OLD_STATEID during delegation return ACPI: x86: Add another system to quirk list for forcing StorageD3Enable firmware: arm_scmi: Cleanup the core driver removal callback i2c: tegra: Allocate DMA memory for DMA engine i2c: i801: add lis3lv02d's I2C address for Vostro 5568 drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid btrfs: remove pointless and double ulist frees in error paths of qgroup tests Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm x86/cpu: Add several Intel server CPU model numbers ASoC: codecs: jz4725b: Fix spelling mistake "Sourc" -> "Source", "Routee" -> "Route" mtd: spi-nor: intel-spi: Disable write protection only if asked spi: intel: Use correct mask for flash and protected regions KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet hugetlbfs: don't delete error page from pagecache arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed spi: stm32: Print summary 'callbacks suppressed' message ARM: dts: at91: sama7g5: fix signal name of pin PB2 ASoC: core: Fix use-after-free in snd_soc_exit() ASoC: tas2770: Fix set_tdm_slot in case of single slot ASoC: tas2764: Fix set_tdm_slot in case of single slot ARM: at91: pm: avoid soft resetting AC DLL serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250: omap: Flush PM QOS work on remove serial: imx: Add missing .thaw_noirq hook tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() ASoC: soc-utils: Remove __exit for snd_soc_util_exit() pinctrl: rockchip: list all pins in a possible mux route for PX30 scsi: scsi_transport_sas: Fix error handling in sas_phy_add() block: sed-opal: kmalloc the cmd/resp buffers bpf: Fix memory leaks in __check_func_call arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro siox: fix possible memory leak in siox_device_add() parport_pc: Avoid FIFO port location truncation pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map drm/vc4: kms: Fix IS_ERR() vs NULL check for vc4_kms drm/panel: simple: set bpc field for logic technologies displays drm/drv: Fix potential memory leak in drm_dev_init() drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker() ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells arm64: dts: imx8mn: Fix NAND controller size-cells ata: libata-transport: fix double ata_host_put() in ata_tport_add() ata: libata-transport: fix error handling in ata_tport_add() ata: libata-transport: fix error handling in ata_tlink_add() ata: libata-transport: fix error handling in ata_tdev_add() nfp: change eeprom length to max length enumerators MIPS: fix duplicate definitions for exported symbols MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed bpf: Initialize same number of free nodes for each pcpu_freelist net: bgmac: Drop free_netdev() from bgmac_enet_remove() mISDN: fix possible memory leak in mISDN_dsp_element_register() net: hinic: Fix error handling in hinic_module_init() net: stmmac: ensure tx function is not running in stmmac_xdp_release() soc: imx8m: Enable OCOTP clock before reading the register net: liquidio: release resources when liquidio driver open failed mISDN: fix misuse of put_device() in mISDN_register_device() net: macvlan: Use built-in RCU list checking net: caif: fix double disconnect client in chnl_net_open() bnxt_en: Remove debugfs when pci_register_driver failed net: mhi: Fix memory leak in mhi_net_dellink() net: dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims xen/pcpu: fix possible memory leak in register_pcpu() net: ionic: Fix error handling in ionic_init_module() net: ena: Fix error handling in ena_init() net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process bridge: switchdev: Fix memory leaks when changing VLAN protocol drbd: use after free in drbd_create_device() platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized platform/surface: aggregator: Do not check for repeated unsequenced packets cifs: add check for returning value of SMB2_close_init net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open() net/x25: Fix skb leak in x25_lapb_receive_frame() cifs: Fix wrong return value checking when GETFLAGS net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() net: thunderbolt: Fix error handling in tbnet_init() cifs: add check for returning value of SMB2_set_info_init ftrace: Fix the possible incorrect kernel message ftrace: Optimize the allocation for mcount entries ftrace: Fix null pointer dereference in ftrace_add_mod() ring_buffer: Do not deactivate non-existant pages tracing: Fix memory leak in tracing_read_pipe() tracing/ring-buffer: Have polling block on watermark tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event() tracing: Fix wild-memory-access in register_synth_event() tracing: Fix race where eprobes can be called before the event tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit() tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit() drm/amd/display: Add HUBP surface flip interrupt handler ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open() ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360 Revert "usb: dwc3: disable USB core PHY management" slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m slimbus: stream: correct presence rate frequencies speakup: fix a segfault caused by switching consoles USB: bcma: Make GPIO explicitly optional USB: serial: option: add Sierra Wireless EM9191 USB: serial: option: remove old LARA-R6 PID USB: serial: option: add u-blox LARA-R6 00B modem USB: serial: option: add u-blox LARA-L6 modem USB: serial: option: add Fibocom FM160 0x0111 composition usb: add NO_LPM quirk for Realforce 87U Keyboard usb: chipidea: fix deadlock in ci_otg_del_timer usb: cdns3: host: fix endless superspeed hub port reset usb: typec: mux: Enter safe mode only when pins need to be reconfigured iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger() iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init() iio: adc: mp2629: fix wrong comparison of channel iio: adc: mp2629: fix potential array out of bound access iio: pressure: ms5611: changed hardcoded SPI speed to value limited dm ioctl: fix misbehavior if list_versions races with module loading serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs serial: 8250: Flush DMA Rx on RLSI serial: 8250_lpss: Configure DMA also w/o DMA filter Input: iforce - invert valid length check when fetching device IDs maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault() net: phy: marvell: add sleep time after enabling the loopback bit scsi: zfcp: Fix double free of FSF request when qdio send fails iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries iommu/vt-d: Set SRE bit only when hardware has SRS cap firmware: coreboot: Register bus in module init mmc: core: properly select voltage range without power cycle mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put() docs: update mediator contact information in CoC doc misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram() perf/x86/intel/pt: Fix sampling using single range output nvme: restrict management ioctls to admin nvme: ensure subsystem reset is single threaded serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake perf: Improve missing SIGTRAP checking ring-buffer: Include dropped pages in counting dirty patches tracing: Fix warning on variable 'struct trace_array' net: use struct_group to copy ip/ipv6 header addresses scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus() scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper() kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case Input: i8042 - fix leaking of platform device on module removal macvlan: enforce a consistent minimal mtu tcp: cdg: allow tcp_cdg_release() to be called multiple times kcm: avoid potential race in kcm_tx_work kcm: close race conditions on sk_receive_queue 9p: trans_fd/p9_conn_cancel: drop client lock earlier gfs2: Check sb_bsize_shift after reading superblock gfs2: Switch from strlcpy to strscpy 9p/trans_fd: always use O_NONBLOCK read/write wifi: wext: use flex array destination for memcpy() mm: fs: initialize fsdata passed to write_begin/write_end interface net/9p: use a dedicated spinlock for trans_fd ntfs: fix use-after-free in ntfs_attr_find() ntfs: fix out-of-bounds read in ntfs_attr_find() ntfs: check overflow when iterating ATTR_RECORDs Linux 5.15.80 Change-Id: Idc9aa4c30c528dd194bc813201cbb2c5df8c1d62 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
Yuan Can
|
71beab7119 |
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]
If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.
Fixes:
|
||
|
Greg Kroah-Hartman
|
99387927eb |
Merge 5.15.51 into android14-5.15
Changes in 5.15.51 random: schedule mix_interrupt_randomness() less often random: quiet urandom warning ratelimit suppression message ALSA: hda/via: Fix missing beep setup ALSA: hda/conexant: Fix missing beep setup ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop ALSA: hda/realtek - ALC897 headset MIC no sound ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly ALSA: hda/realtek: Add quirk for Clevo PD70PNT ALSA: hda/realtek: Add quirk for Clevo NS50PU net: openvswitch: fix parsing of nw_proto for IPv6 fragments 9p: Fix refcounting during full path walks for fid lookups 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl 9p: fix fid refcount leak in v9fs_vfs_get_link btrfs: fix hang during unmount when block group reclaim task is running btrfs: prevent remounting to v1 space cache for subpage mount btrfs: add error messages to all unrecognized mount options scsi: ibmvfc: Store vhost pointer during subcrq allocation scsi: ibmvfc: Allocate/free queue resource only during probe/remove mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing mmc: mediatek: wait dma stop bit reset to 0 xen/gntdev: Avoid blocking in unmap_grant_pages() MAINTAINERS: Add new IOMMU development mailing list mtd: rawnand: gpmi: Fix setting busy timeout setting ata: libata: add qc->flags in ata_qc_complete_template tracepoint dm era: commit metadata in postsuspend after worker stops dm mirror log: clear log bits up to BITS_PER_LONG boundary tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher() drm/i915: Implement w/a 22010492432 for adl-s USB: serial: pl2303: add support for more HXN (G) types USB: serial: option: add Telit LE910Cx 0x1250 composition USB: serial: option: add Quectel EM05-G modem USB: serial: option: add Quectel RM500K module support drm/msm: Ensure mmap offset is initialized drm/msm: Fix double pm_runtime_disable() call netfilter: use get_random_u32 instead of prandom scsi: scsi_debug: Fix zone transition to full condition drm/msm: Switch ordering of runpm put vs devfreq_idle scsi: iscsi: Exclude zero from the endpoint ID range xsk: Fix generic transmit when completion queue reservation fails drm/msm: use for_each_sgtable_sg to iterate over scatterlist bpf: Fix request_sock leak in sk lookup helpers drm/sun4i: Fix crash during suspend after component bind failure bpf, x86: Fix tail call count offset calculation on bpf2bpf call scsi: storvsc: Correct reporting of Hyper-V I/O size limits phy: aquantia: Fix AN when higher speeds than 1G are not advertised KVM: arm64: Prevent kmemleak from accessing pKVM memory net: Write lock dev_base_lock without disabling bottom halves. net: fix data-race in dev_isalive() tipc: fix use-after-free Read in tipc_named_reinit igb: fix a use-after-free issue in igb_clean_tx_ring bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers ethtool: Fix get module eeprom fallback net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind() drm/msm/dp: Drop now unused hpd_high member drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed drm/msm/dp: do not initialize phy until plugin interrupt received drm/msm/dp: force link training for display resolution change perf arm-spe: Don't set data source if it's not a memory operation erspan: do not assume transport header is always set net/tls: fix tls_sk_proto_close executed repeatedly udmabuf: add back sanity check selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh xen-blkfront: Handle NULL gendisk x86/xen: Remove undefined behavior in setup_features() MIPS: Remove repetitive increase irq_err_count afs: Fix dynamic root getattr ice: ethtool: advertise 1000M speeds properly regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips regmap-irq: Fix offset/index mismatch in read_sub_irq_data() igb: Make DMA faster when CPU is active on the PCIe link virtio_net: fix xdp_rxq_info bug after suspend/resume Revert "net/tls: fix tls_sk_proto_close executed repeatedly" sock: redo the psock vs ULP protection check nvme-pci: add NO APST quirk for Kioxia device nvme: move the Samsung X5 quirk entry to the core quirks gpio: winbond: Fix error code in winbond_gpio_get() s390/cpumf: Handle events cycles and instructions identical iio: mma8452: fix probe fail when device tree compatible is used. iio: magnetometer: yas530: Fix memchr_inv() misuse iio: adc: vf610: fix conversion mode sysfs node name usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC xhci: turn off port power in shutdown xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI usb: gadget: Fix non-unique driver names in raw-gadget driver USB: gadget: Fix double-free bug in raw_gadget driver usb: chipidea: udc: check request status before setting device address dt-bindings: usb: ohci: Increase the number of PHYs dt-bindings: usb: ehci: Increase the number of PHYs btrfs: don't set lock_owner when locking extent buffer for reading btrfs: fix deadlock with fsync+fiemap+transaction commit f2fs: attach inline_data after setting compression iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio: accel: mma8452: ignore the return value of reset operation iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() iio: trigger: sysfs: fix use-after-free on remove iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: afe: rescale: Fix boolean logic bug iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: axp288: Override TS pin bias current for some models iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() xtensa: xtfpga: Fix refcount leak bug in setup xtensa: Fix refcount leak bug in time.c parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI parisc: Enable ARCH_HAS_STRICT_MODULE_RWX powerpc/microwatt: wire up rng during setup_arch() powerpc: Enable execve syscall exit tracepoint powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address powerpc/powernv: wire up rng during setup_arch drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node ARM: dts: imx6qdl: correct PU regulator ramp delay arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode ARM: exynos: Fix refcount leak in exynos_map_pmu soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe ARM: Fix refcount leak in axxia_boot_secondary memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings ARM: cns3xxx: Fix refcount leak in cns3xxx_init modpost: fix section mismatch check for exported init/exit sections ARM: dts: bcm2711-rpi-400: Fix GPIO line names random: update comment from copy_to_user() -> copy_to_iter() perf build-id: Fix caching files with a wrong build ID dma-direct: use the correct size for dma_set_encrypted() kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) powerpc/pseries: wire up rng during setup_arch() Linux 5.15.51 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Ic8819a78d2d84055e7a6d44bdfab6a6cd8296dac |
||
Damien Le Moal
|
7d5fe94333 |
scsi: scsi_debug: Fix zone transition to full condition
[ Upstream commit 566d3c57eb526f32951af15866086e236ce1fc8a ]
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes:
|
||
Jaegeuk Kim
|
6a1eb03a82 |
Merge remote-tracking branch 'aosp/upstream-f2fs-stable-linux-5.15.y' into android14-5.15
* aosp/upstream-f2fs-stable-linux-5.15.y: f2fs: attach inline_data after setting compression f2fs: fix to tag gcing flag on page during file defragment f2fs: replace F2FS_I(inode) and sbi by the local variable f2fs: add f2fs_init_write_merge_io function f2fs: avoid unneeded error handling for revoke_entry_slab allocation f2fs: allow compression for mmap files in compress_mode=user f2fs: fix typo in comment f2fs: make f2fs_read_inline_data() more readable f2fs: fix to do sanity check for inline inode f2fs: fix fallocate to use file_modified to update permissions consistently f2fs: don't use casefolded comparison for "." and ".." f2fs: do not stop GC when requiring a free section f2fs: keep wait_ms if EAGAIN happens f2fs: introduce f2fs_gc_control to consolidate f2fs_gc parameters f2fs: reject test_dummy_encryption when !CONFIG_FS_ENCRYPTION f2fs: kill volatile write support f2fs: change the current atomic write way f2fs: don't need inode lock for system hidden quota f2fs: stop allocating pinned sections if EAGAIN happens f2fs: skip GC if possible when checkpoint disabling f2fs: give priority to select unpinned section for foreground GC f2fs: fix to do sanity check on total_data_blocks f2fs: fix deadloop in foreground GC f2fs: fix to do sanity check on block address in f2fs_do_zero_range() f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count() f2fs: write checkpoint during FG_GC f2fs: fix to clear dirty inode in f2fs_evict_inode() f2fs: ensure only power of 2 zone sizes are allowed f2fs: call bdev_zone_sectors() only once on init_blkz_info() f2fs: extend stat_lock to avoid potential race in statfs f2fs: avoid infinite loop to flush node pages f2fs: use flush command instead of FUA for zoned device f2fs: remove WARN_ON in f2fs_is_valid_blkaddr f2fs: replace usage of found with dedicated list iterator variable f2fs: Remove usage of list iterator pas the loop for list_move_tail() f2fs: fix dereference of stale list iterator after loop body f2fs: fix to do sanity check on inline_dots inode f2fs: introduce data read/write showing path info f2fs: remove unnecessary f2fs_lock_op in f2fs_new_inode f2fs: don't set GC_FAILURE_PIN for background GC f2fs: check pinfile in gc_data_segment() in advance f2fs: should not truncate blocks during roll-forward recovery f2fs: fix wrong condition check when failing metapage read f2fs: keep io_flags to avoid IO split due to different op_flags in two fio holders f2fs: remove obsolete whint_mode f2fs: pass the bio operation to bio_alloc_bioset f2fs: don't pass a bio to f2fs_target_device f2fs: replace congestion_wait() calls with io_schedule_timeout() FROMGIT: scsi: scsi_debug: Add gap zone support FROMGIT: scsi: scsi_debug: Rename zone type constants FROMGIT: scsi: scsi_debug: Fix a typo FROMGIT: scsi: sd: sd_zbc: Hide gap zones FROMGIT: scsi: sd: sd_zbc: Return early in sd_zbc_check_zoned_characteristics() FROMGIT: scsi: sd: sd_zbc: Introduce struct zoned_disk_info FROMGIT: scsi: sd: sd_zbc: Use logical blocks as unit when querying zones FROMGIT: scsi: sd: sd_zbc: Verify that the zone size is a power of two FROMGIT: scsi: sd: sd_zbc: Improve source code documentation Bug: 228919347 Signed-off-by: Jaegeuk Kim <jaegeuk@google.com> Change-Id: If51d1a03be757e74034b297c4f54df23b501da71 |
||
|
Damien Le Moal
|
423088083d |
FROMGIT: scsi: scsi_debug: Add gap zone support
Add the 'zone_cap_mb' kernel module parameter. This parameter defines the
zone capacity. The zone capacity must be less than or equal to the zone
size.
Report that sequential write zones and gap zones are paired in the Zoned
Block Device Characteristics VPD page (page B6h).
This patch has been tested as follows:
modprobe scsi_debug delay=0 sector_size=512 dev_size_mb=128 zbc=host-managed zone_nr_conv=16 zone_size_mb=4 zone_cap_mb=3
modprobe brd rd_nr=1 rd_size=$((1<<20))
mkfs.f2fs -m /dev/ram0 -c /dev/${scsi_debug_dev}
mount /dev/ram0 /mnt
# Run a fio job that uses /mnt
Link: https://lore.kernel.org/r/20220421183023.3462291-10-bvanassche@acm.org
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[ bvanassche: Switched to reporting a constant zone starting LBA granularity ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bug: 230616396
(cherry picked from commit 4a5fc1c6d75261f2f014a961d39ab10aae66a0f9 mkp-scsi/staging)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Change-Id: Ie8010a82a0070123cd56fcd0bf70ffa81d397d66
|
||
|
Damien Le Moal
|
c8622f49e4 |
FROMGIT: scsi: scsi_debug: Rename zone type constants
Rename the scsi_debug zone type constants to prevent a conflict with the ZBC_ZONE_TYPE_GAP constant from include/scsi/scsi_proto.h. Link: https://lore.kernel.org/r/20220421183023.3462291-9-bvanassche@acm.org Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> [ bvanassche: Extracted these changes from a larger patch ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bug: 230616396 (cherry picked from commit 35dbe2b9a7b0c92777c855c6a2cca8390f4c166b mkp-scsi/staging) Signed-off-by: Bart Van Assche <bvanassche@acm.org> Change-Id: Ibd71fb99c22839188b66649c948afe1a600f8c03 |
||
|
Bart Van Assche
|
b27960f108 |
FROMGIT: scsi: scsi_debug: Fix a typo
Change a single occurrence of "nad" into "and". Link: https://lore.kernel.org/r/20220421183023.3462291-8-bvanassche@acm.org Cc: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bug: 230616396 (cherry picked from commit 897284e8a04894537b58a079a2729a70731c229d mkp-scsi/staging) Signed-off-by: Bart Van Assche <bvanassche@acm.org> Change-Id: I6181e5a9a3a1d20e6d71c99aef6c1a2e9d3ac053 |
||
George Kennedy
|
dfc3fff637 |
scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()
commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream. In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
George Kennedy
|
3085147645 |
scsi: scsi_debug: Fix type in min_t to avoid stack OOB
commit 36e07d7ede88a1f1ef8f0f209af5b7612324ac2c upstream. Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
George Kennedy
|
47d11d3520 |
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
commit 3344b58b53a76199dae48faa396e9fc37bf86992 upstream. If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of that, for a following NULL pointer check to work on the returned pointer, kcalloc() must not be called with the size arg equal to zero. Return early without error before the kcalloc() call if size arg is zero. BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789 CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x3b/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline] do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline] resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline] scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Shin'ichiro Kawasaki
|
ebacb44cb2 |
scsi: scsi_debug: Fix buffer size of REPORT ZONES command
commit 7db0e0c8190a086ef92ce5bb960836cde49540aa upstream.
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.
Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes:
|
||
|
Shin'ichiro Kawasaki
|
8b3b9aaada |
scsi: scsi_debug: Zero clear zones at reset write pointer
[ Upstream commit 2d62253eb1b60f4ce8b39125eee282739b519297 ]
When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.
Zero written data in the zone when resetting the write pointer.
Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes:
|
||
Ye Bin
|
66523553fa |
scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()
[ Upstream commit f347c26836c270199de1599c3cd466bb7747caa9 ] The following issue was observed running syzkaller: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815 CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe4/0x14a lib/dump_stack.c:118 print_address_description+0x73/0x280 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x272/0x370 mm/kasan/report.c:410 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:377 [inline] sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034 __blk_run_queue_uncond block/blk-core.c:464 [inline] __blk_run_queue+0x1a4/0x380 block/blk-core.c:484 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716 sg_write+0x64/0xa0 drivers/scsi/sg.c:622 __vfs_write+0xed/0x690 fs/read_write.c:485 kill_bdev:block_device:00000000e138492c vfs_write+0x184/0x4c0 fs/read_write.c:549 ksys_write+0x107/0x240 fs/read_write.c:599 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe We get 'alen' from command its type is int. If userspace passes a large length we will get a negative 'alen'. Switch n, alen, and rlen to u32. Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Ye Bin
|
5b8bed6464 |
scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()
[ Upstream commit 4e3ace0051e7e504b55d239daab8789dd89b863c ] The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32. Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Linus Torvalds
|
a9c9a6f741 |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, qla2xxx, target, smartpqi, lpfc, mpt3sas). The core change causing the most churn was replacing the command request field request with a macro, allowing us to offset map to it and remove the redundant field; the same was also done for the tag field. The most impactful change is the final removal of scsi_ioctl, which has been deprecated for over a decade" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits) scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1 scsi: ufs: ufs-exynos: Fix static checker warning scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Copyright updates for 14.0.0.1 patches scsi: lpfc: Update lpfc version to 14.0.0.1 scsi: lpfc: Add bsg support for retrieving adapter cmf data scsi: lpfc: Add cmf_info sysfs entry scsi: lpfc: Add debugfs support for cm framework buffers scsi: lpfc: Add support for maintaining the cm statistics buffer scsi: lpfc: Add rx monitoring statistics scsi: lpfc: Add support for the CM framework scsi: lpfc: Add cmfsync WQE support scsi: lpfc: Add support for cm enablement buffer scsi: lpfc: Add cm statistics buffer support scsi: lpfc: Add EDC ELS support scsi: lpfc: Expand FPIN and RDF receive logging scsi: lpfc: Add MIB feature enablement support scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware scsi: fc: Add EDC ELS definition ... |
||
|
Bart Van Assche
|
a6e76e6f2c |
scsi: scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-42-bvanassche@acm.org Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Uwe Kleine-König
|
fc7a6209d5 |
bus: Make remove callback return void
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Martin K. Petersen
|
f7be677227 |
scsi: scsi_debug: Improve RDPROTECT/WRPROTECT handling
It is useful for testing purposes to be able to inject errors by writing bad protection information to media with checking disabled and then attempting to read it back. Extend scsi_debug's PI verification logic to give the driver feature parity with commercially available drives. Almost all devices with PI capability support RDPROTECT and WRPROTECT values of 0, 1, and 3. Link: https://lore.kernel.org/r/20210609033929.3815-10-martin.petersen@oracle.com Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Message-Id: <20210609033929.3815-10-martin.petersen@oracle.com> |
||
|
Martin K. Petersen
|
c78be80d20 |
scsi: scsi_debug: Remove dump_sector()
The function used to dump sectors containing protection information errors was useful during initial development over a decade ago. However, dump_sector() substantially slows down the system during testing due to writing an entire sector's worth of data to syslog on every error. We now log plenty of information about the nature of detected protection information errors throughout the stack. Dumping the entire contents of an offending sector is no longer needed. Link: https://lore.kernel.org/r/20210609033929.3815-9-martin.petersen@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Message-Id: <20210609033929.3815-9-martin.petersen@oracle.com> |
||
Hannes Reinecke
|
464a00c9e0 |
scsi: core: Kill DRIVER_SENSE
Replace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition(). Audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present. [mkp: fix zeroday srp warning] Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> fix |
||
|
Hannes Reinecke
|
f2b1e9c6f8 |
scsi: core: Introduce scsi_build_sense()
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer() to format the buffer and set the correct SCSI status. Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Uwe Kleine-König
|
8fb82abccc |
scsi: scsi_debug: Drop if with an always false condition
to_sdebug_host() is a container_of operation, so it never returns NULL. Link: https://lore.kernel.org/r/20210506203206.254258-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Douglas Gilbert
|
fc09acb7de |
scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
Make sure that the cmd_per_lun value placed in the host template never
exceeds the can_queue value. If the max_queue driver parameter is not
specified then both cmd_per_lun and can_queue are set to CAN_QUEUE.
CAN_QUEUE is a compile time constant and is used to dimension an array to
hold queued requests. If the max_queue driver parameter is given it is must
be less than or equal to CAN_QUEUE and if so, the host template values are
adjusted.
Remove undocumented code that allowed queue_depth to exceed CAN_QUEUE and
cause stack full type errors. There is a documented way to do that with
every_nth and
echo 0x8000 > /sys/bus/pseudo/drivers/scsi_debug/opts
See: https://sg.danny.cz/sg/scsi_debug.html
Tweak some formatting, and add a suggestion to the "trim poll_queues"
warning.
Link: https://lore.kernel.org/r/20210415015031.607153-1-dgilbert@interlog.com
Reported-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: John Garry <john.garry@hauwei.com>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
||
|
Douglas Gilbert
|
771f712ba5 |
scsi: scsi_debug: Fix cmd duration calculation
In some cases, sdebug_defer::cmpl_ts (completion timestamp) wasn't being properly set when REQ_HIPRI was given. Fix that and improve code to only call ktime_get_boottime_ns() for commands with REQ_HIPRI set as cmpl_ts is only used in that case. Link: https://lore.kernel.org/r/20210304014107.307625-1-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
4a0c6f432d |
scsi: scsi_debug: Add new defer type for mq_poll
Add a new sdeb_defer_type enumeration: SDEB_DEFER_POLL for requests that have REQ_HIPRI set in cmd_flags field. It is expected that these requests will be polled via the mq_poll entry point which is driven by calls to blk_poll() in the block layer. Therefore timer events are not 'wired up' in the normal fashion. There are still cases with short delays (e.g. < 10 microseconds) where by the time the command response processing occurs, the delay is already exceeded in which case the code calls scsi_done() directly. In such cases there is no window for mq_poll() to be called. Add 'mq_polls' counter that increments on each scsi_done() called via the mq_poll entry point. Can be used to show (with 'cat /proc/scsi/scsi_debug/<host_id>') that blk_poll() is causing completions rather than some other mechanism. Link: https://lore.kernel.org/r/20210215074048.19424-5-kashyap.desai@broadcom.com Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Kashyap Desai
|
c4b57d89ba |
scsi: scsi_debug: mq_poll support
Add support of the mq_poll interface to scsi_debug. This feature requires shared host tag support in kernel and driver. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210215074048.19424-4-kashyap.desai@broadcom.com Cc: dgilbert@interlog.com Cc: linux-block@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Linus Torvalds
|
bdb39c9509 |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which is bound to cause conflicts with a trivial change somewhere). The only big major rework of note is the one from Hannes trying to clean up our result handling code in the drivers to make it consistent" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits) scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal scsi: ufs: Give clk scaling min gear a value scsi: lpfc: Fix 'physical' typos scsi: megaraid_mbox: Fix spelling of 'allocated' scsi: qla2xxx: Simplify the calculation of variables scsi: message: fusion: Fix 'physical' typos scsi: target: core: Change ASCQ for residual write scsi: target: core: Signal WRITE residuals scsi: target: core: Set residuals for 4Kn devices scsi: hisi_sas: Add trace FIFO debugfs support scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove() scsi: hisi_sas: Enable debugfs support by default scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep() scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe() scsi: lpfc: Add auto select on IRQ_POLL scsi: ncr53c8xx: Fix typos scsi: lpfc: Fix ancient double free scsi: qla2xxx: Fix some memory corruption scsi: qla2xxx: Remove redundant NULL check scsi: megaraid: Fix ifnullfree.cocci warnings ... |
||
Maurizio Lombardi
|
f852c596f2 |
scsi: scsi_debug: Fix a memory leak
The sdebug_q_arr pointer must be freed when the module is unloaded.
$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888e1cfb0000 (size 4096):
comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000458f4f5d>] 0xffffffffc06702d9
[<000000003edc4b1f>] do_one_initcall+0xe9/0x57d
[<00000000da7d518c>] do_init_module+0x1d1/0x6f0
[<000000009a6a9248>] load_module+0x36bd/0x4f50
[<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260
[<000000009532db57>] do_syscall_64+0xa5/0x420
[<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf
Fixes:
|
||
|
Hannes Reinecke
|
7a64c81448 |
scsi: scsi_debug: Do not set COMMAND_COMPLETE
COMMAND_COMPLETE is defined as '0', so setting it is quite pointless. Link: https://lore.kernel.org/r/20210113090500.129644-23-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Dinghao Liu
|
3b01d7ea4d |
scsi: scsi_debug: Fix memleak in scsi_debug_init()
When sdeb_zbc_model does not match BLK_ZONED_NONE, BLK_ZONED_HA or BLK_ZONED_HM, we should free sdebug_q_arr to prevent memleak. Also there is no need to execute sdebug_erase_store() on failure of sdeb_zbc_model_str(). Link: https://lore.kernel.org/r/20201226061503.20050-1-dinghao.liu@zju.edu.cn Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Linus Torvalds
|
55e0500eb5 |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ... |
||
John Garry
|
f7c4cdc712 |
scsi: scsi_debug: Support host tagset
When host_max_queue is set (> 0), set the Scsi_Host.host_tagset such that blk-mq will use a hostwide tagset over all SCSI host submission queues. This means that we may expose all submission queues and always use the hwq chosen by blk-mq. And since if sdebug_host_max_queue is set, sdebug_max_queue is fixed to the same value, we can simplify how sdebug_driver_template.can_queue is set. Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Martin K. Petersen
|
02f7415054 |
Merge branch '5.9/scsi-fixes' into 5.10/scsi-ufs
Resolve UFS discrepancies between fixes and queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
John Pittman
|
8c65723566 |
scsi: scsi_debug: Make sdebug_build_parts() respect virtual_gb
If virtual_gb is passed while using num_parts, when creating the partitions, virtual_gb is not respected. Set num_sectors using get_sdebug_capacity() to pull virtual_gb if set. Link: https://lore.kernel.org/r/20200902211434.9979-3-jpittman@redhat.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
John Pittman
|
979e0dc345 |
scsi: scsi_debug: Adjust num_parts to create equally sized partitions
Currently when using the num_parts parameter, partitions are aligned and the end sector is one prior to the next start. This creates different sized partitions. Create instead equally sized partitions by trimming the end of each partition to the size of the smallest partition. This aligns better with what one would expect from automatically created partitions and can be helpful with testing things such as raid which often expect legs of the same size. Minimal space is lost as the initial partition starting size is calculated by dividing num_sectors by sdebug_num_parts. Link: https://lore.kernel.org/r/20200902211434.9979-2-jpittman@redhat.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
ad0c7775e7 |
scsi: scsi_debug: Implement lun_format
Implement 'flat space LUN addressing', which allows us to raise the max_lun limitation to 16384. The maximum number of LUNs prior to this patch was 256. Link: https://lore.kernel.org/r/20200821042249.5097-1-dgilbert@interlog.com Suggested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
Niklas Cassel
|
75d46c6d15 |
scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()
resp_open_zone() always calls zbc_open_zone() with parameter explicit set to true. If zbc_open_zone() is called with parameter explicit set to true, and the current zone state is implicit open, it will call zbc_close_zone() on the zone before proceeding. Therefore, there is no need for resp_open_zone() to call zbc_close_zone() on an implicitly open zone before calling zbc_open_zone(). Remove superfluous close zone in resp_open_zone(). Link: https://lore.kernel.org/r/20200821130007.39938-1-niklas.cassel@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
223f91b480 |
scsi: scsi_debug: Fix scp is NULL errors
John Garry reported 'sdebug_q_cmd_complete: scp is NULL' failures that were mainly seen on aarch64 machines (e.g. RPi 4 with four A72 CPUs). The problem was tracked down to a missing critical section on a "short circuit" path. Namely, the time to process the current command so far has already exceeded the requested command duration (i.e. the number of nanoseconds in the ndelay parameter). The random=1 parameter setting was pivotal in finding this error. The failure scenario involved first taking that "short circuit" path (due to a very short command duration) and then taking the more likely hrtimer_start() path (due to a longer command duration). With random=1 each command's duration is taken from the uniformly distributed [0..ndelay) interval. The fio utility also helped by reliably generating the error scenario at about once per minute on a RPi 4 (64 bit OS). Link: https://lore.kernel.org/r/20200813155738.109298-1-dgilbert@interlog.com Reported-by: John Garry <john.garry@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
fc13638ae9 |
scsi: scsi_debug: Implement tur_ms_to_ready parameter
The current driver responds to TEST UNIT READY (TUR) with a GOOD status immediately after a scsi_debug device (LU) is created. This is unrealistic as even SSDs take some time after power-on before accepting media access commands. Add the tur_ms_to_ready parameter whose unit is milliseconds (default 0) and is the period before which a TUR (or any media access command) will set the CHECK CONDITION status with a sense key of NOT READY and an additional sense of "Logical unit is in process of becoming ready". The period starts when each scsi_debug device is created. This patch was prompted by T10 proposal 20-061r2 which was accepted on 2020716. It adds that a TUR in the situation described in the previous paragraph may set the INFO field (or descriptor) in the sense data to the estimated number in milliseconds before a subsequent TUR will yield a GOOD status. This patch follows that advice. Link: https://lore.kernel.org/r/20200724155531.668144-1-dgilbert@interlog.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
84905d34f1 |
scsi: scsi_debug: Fix request sense
The SCSI REQUEST SENSE command emulation was found to be broken. It is a quite complex command so try and make it do a subset of what it should do. Remove the attempt to mimic SCSI-1 REQUEST SENSE (i.e. return the sense data for the previous failed command). Add some reporting of "pollable" sense data [see spc6r02: 5.12.2]. Keep the IEC mode page MRIE=6 TEST=1 predictive failure reporting. Link: https://lore.kernel.org/r/20200723194819.545573-1-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
30f67481a1 |
scsi: scsi_debug: Update documentation url and bump version
This driver maintains a version number which is cross-referenced in the documentation (e.g. to indicate when features are added or changed) and exposed through the responses to various SCSI commands. For example the version number is use as the Product Revision number in standard SCSI INQUIRY responses issued by this driver. The version date string is placed in a vendor specific area in each standard SCSI INQUIRY response. This patch bumps both. Update the driver documentation URL that appears at the top of the driver source file. Link: https://lore.kernel.org/r/20200712182927.72044-3-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Douglas Gilbert
|
3a90a63d02 |
scsi: scsi_debug: every_nth triggered error injection
This patch simplifies, or at least makes more consistent, the way setting
the every_nth parameter injects errors. Here is a list of 'opts' flags and
in which cases they inject errors when abs(every_nth)%command_count == 0 is
reached:
- OPT_RECOVERED_ERR: issued on READ(*)s, WRITE(*)s and
WRITE_SCATTEREDs
- OPT_DIF_ERR: issued on READ(*)s, WRITE(*)s and
WRITE_SCATTEREDs
- OPT_DIX_ERR: issued on READ(*)s, WRITE(*)s and
WRITE_SCATTEREDs
- OPT_SHORT_TRANSFER: issued on READ(*)s
- OPT_TRANSPORT_ERR: issued on all commands
- OPT_CMD_ABORT: issued on all commands
The other uses of every_nth were not modified.
Previously if, for example, OPT_SHORT_TRANSFER was armed then if
(abs(every_nth) % command_count == 0) occurred during a command that was
_not_ a READ, then no error injection occurred. This behaviour puzzled
several testers. Now a global "inject_pending" flag is set and the _next_
READ will get hit and that flag is cleared. OPT_RECOVERED_ERR, OPT_DIF_ERR
and OPT_DIX_ERR have similar behaviour. A downside of this is that there
might be a hang-over pending injection that gets triggered by a following
test.
Also expand the every_nth runtime parameter so that it can take hex value
(i.e. with a leading '0x') as well as a decimal value. Now both the 'opts'
and the 'every_nth' runtime parameters can take hexadecimal values.
Link: https://lore.kernel.org/r/20200712182927.72044-2-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|