Changes in 5.15.86
drm/amd/display: Manually adjust strobe for DCN303
usb: musb: remove extra check in musb_gadget_vbus_draw
arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
arm64: dts: qcom: msm8996: Add MSM8996 Pro support
arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables
arm64: dts: qcom: msm8996: fix GPU OPP table
ARM: dts: qcom: apq8064: fix coresight compatible
arm64: dts: qcom: sdm630: fix UART1 pin bias
arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
arm64: dts: qcom: msm8916: Drop MSS fallback compatible
objtool, kcsan: Add volatile read/write instrumentation to whitelist
ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name
arm64: dts: qcom: sm8250: correct LPASS pin pull down
soc: qcom: llcc: make irq truly optional
arm64: dts: qcom: Correct QMP PHY child node name
arm64: dts: qcom: sm8150: fix UFS PHY registers
arm64: dts: qcom: sm8250: fix UFS PHY registers
arm64: dts: qcom: sm8350: fix UFS PHY registers
arm64: dts: qcom: sm8250: drop bogus DP PHY clock
soc: qcom: apr: make code more reuseable
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
arm64: dts: qcom: sm6125: fix SDHCI CQE reg names
arm: dts: spear600: Fix clcd interrupt
soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
arm64: Treat ESR_ELx as a 64-bit register
arm64: mm: kfence: only handle translation faults
perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()
perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes
arm64: dts: mt6779: Fix devicetree build warnings
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
arm64: dts: mt2712e: Fix unit address for pinctrl node
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: turris-omnia: Add switch port 6 node
arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC
seccomp: Move copy_seccomp() to no failure path.
pstore/ram: Fix error return code in ramoops_probe()
ARM: mmp: fix timer_read delay
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
ovl: store lower path in ovl_inode
ovl: use ovl_copy_{real,upper}attr() wrappers
ovl: remove privs in ovl_copyfile()
ovl: remove privs in ovl_fallocate()
sched/fair: Cleanup task_util and capacity type
sched/uclamp: Fix relationship between uclamp and migration margin
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
sched/fair: Removed useless update of p->recent_used_cpu
sched/core: Introduce sched_asym_cpucap_active()
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
cpuidle: dt: Return the correct numbers of parsed idle states
alpha: fix TIF_NOTIFY_SIGNAL handling
alpha: fix syscall entry in !AUDUT_SYSCALL case
x86/sgx: Reduce delay and interference of enclave release
PM: hibernate: Fix mistake in kerneldoc comment
fs: don't audit the capability check in simple_xattr_list()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
selftests/ftrace: event_triggers: wait longer for test_event_enable
perf: Fix possible memleak in pmu_dev_alloc()
lib/debugobjects: fix stat count and optimize debug_objects_mem_init
platform/x86: huawei-wmi: fix return value calculation
timerqueue: Use rb_entry_safe() in timerqueue_getnext()
proc: fixup uptime selftest
lib/fonts: fix undefined behavior in bit shift for get_default_font
ocfs2: fix memory leak in ocfs2_stack_glue_init()
MIPS: vpe-mt: fix possible memory leak while module exiting
MIPS: vpe-cmp: fix possible memory leak while module exiting
selftests/efivarfs: Add checking of the test return value
PNP: fix name memory leak in pnp_alloc_dev()
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
thermal: core: fix some possible name leaks in error paths
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
SUNRPC: Return true/false (not 1/0) from bool functions
NFSD: Finish converting the NFSv2 GETACL result encoder
nfsd: don't call nfsd_file_put from client states seqfile display
genirq/irqdesc: Don't try to remove non-existing sysfs files
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
lib/notifier-error-inject: fix error when writing -errno to debugfs file
debugfs: fix error when writing negative value to atomic_t debugfs file
rapidio: fix possible name leaks when rio_add_device() fails
rapidio: rio: fix possible name leak in rio_register_mport()
clocksource/drivers/sh_cmt: Access registers according to spec
mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem
mips: ralink: mt7621: soc queries and tests as functions
mips: ralink: mt7621: do not use kzalloc too early
futex: Move to kernel/futex/
futex: Resend potentially swallowed owner death notification
cpu/hotplug: Make target_store() a nop when target == state
cpu/hotplug: Do not bail-out in DYING/STARTING sections
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
x86/xen: Fix memory leak in xen_init_lock_cpu()
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_ec_typec: zero out stale pointers
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
MIPS: BCM63xx: Add check for NULL for clk in clk_enable
MIPS: OCTEON: warn only once if deprecated link status is being used
lockd: set other missing fields when unlocking files
fs: sysv: Fix sysv_nblocks() returns wrong value
rapidio: fix possible UAF when kfifo_alloc() fails
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
relay: fix type mismatch when allocating memory in relay_create_buf()
hfs: Fix OOB Write in hfs_asc2mac
rapidio: devices: fix missing put_device in mport_cdev_open
platform/mellanox: mlxbf-pmc: Fix event typo
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
wifi: rtl8xxxu: Fix reading the vendor of combo chips
drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
libbpf: Fix use-after-free in btf_dump_name_dups
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros
ata: add/use ata_taskfile::{error|status} fields
ata: libata: fix NCQ autosense logic
ipmi: kcs: Poll OBF briefly to reduce OBE latency
drm/amdgpu/powerplay/psm: Fix memory leak in power state init
media: v4l2-ctrls: Fix off-by-one error in integer menu control check
media: coda: jpeg: Add check for kmalloc
media: adv748x: afe: Select input port when initializing AFE
media: i2c: ad5820: Fix error path
venus: pm_helpers: Fix error check in vcodec_domains_get()
soreuseport: Fix socket selection for SO_INCOMING_CPU.
media: exynos4-is: don't rely on the v4l2_async_subdev internals
libbpf: Btf dedup identical struct test needs check for nested structs/arrays
can: kvaser_usb: do not increase tx statistics when sending error message frames
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
can: kvaser_usb_leaf: Set Warning state even without bus errors
can: kvaser_usb: make use of units.h in assignment of frequency
can: kvaser_usb_leaf: Fix improved state not being reported
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
can: kvaser_usb_leaf: Fix bogus restart events
can: kvaser_usb: Add struct kvaser_usb_busparams
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
drm/rockchip: lvds: fix PM usage counter unbalance in poweron
clk: renesas: r9a06g032: Repair grave increment error
spi: Update reference to struct spi_controller
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
ima: Handle -ESTALE returned by ima_filter_rule_match()
drm/msm/hdmi: drop unused GPIO support
drm/msm/hdmi: use devres helper for runtime PM management
bpf: Fix slot type check in check_stack_write_var_off
media: vivid: fix compose size exceed boundary
media: platform: exynos4-is: fix return value check in fimc_md_probe()
bpf: propagate precision in ALU/ALU64 operations
bpf: Check the other end of slot_type for STACK_SPILL
bpf: propagate precision across all frames, not just the last one
clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
mtd: Fix device name leak when register device failed in add_mtd_device()
Input: joystick - fix Kconfig warning for JOYSTICK_ADC
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
media: camss: Clean up received buffers on failed start of streaming
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
rxrpc: Fix ack.bufferSize to be 0 when generating an ack
bfq: fix waker_bfqq inconsistency crash
drm/radeon: Add the missed acpi_put_table() to fix memory leak
drm/mediatek: Modify dpi power on/off sequence.
ASoC: pxa: fix null-pointer dereference in filter()
libbpf: Fix uninitialized warning in btf_dump_dump_type_data
nvmet: only allocate a single slab for bvecs
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
nvme: return err on nvme_init_non_mdts_limits fail
regulator: qcom-rpmh: Fix PMR735a S3 regulator spec
drm/fourcc: Add packed 10bit YUV 4:2:0 format
drm/fourcc: Fix vsub/hsub for Q410 and Q401
integrity: Fix memory leakage in keyring allocation error path
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
block: clear ->slave_dir when dropping the main slave_dir reference
wifi: ath10k: Fix return value in ath10k_pci_init()
drm/msm/a6xx: Fix speed-bin detection vs probe-defer
mtd: lpddr2_nvm: Fix possible null-ptr-deref
Input: elants_i2c - properly handle the reset GPIO when power is off
media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
media: solo6x10: fix possible memory leak in solo_sysfs_init()
media: platform: exynos4-is: Fix error handling in fimc_md_init()
media: videobuf-dma-contig: use dma_mmap_coherent
inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
mtd: spi-nor: hide jedec_id sysfs attribute if not present
mtd: spi-nor: Fix the number of bytes for the dummy cycles
bpf: Move skb->len == 0 checks into __bpf_redirect
HID: hid-sensor-custom: set fixed size for custom attributes
pinctrl: k210: call of_node_put()
ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
regulator: core: use kfree_const() to free space conditionally
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
drm/amdgpu: fix pci device refcount leak
bonding: fix link recovery in mode 2 when updelay is nonzero
mtd: maps: pxa2xx-flash: fix memory leak in probe
drbd: remove call to memset before free device/resource/connection
drbd: destroy workqueue when drbd device was freed
ASoC: qcom: Add checks for devm_kcalloc
media: vimc: Fix wrong function called when vimc_init() fails
media: imon: fix a race condition in send_packet()
clk: imx8mn: rename vpu_pll to m7_alt_pll
clk: imx: replace osc_hdmi with dummy
clk: imx8mn: fix imx8mn_sai2_sels clocks list
clk: imx8mn: fix imx8mn_enet_phy_sels clocks list
pinctrl: pinconf-generic: add missing of_node_put()
media: dvb-core: Fix ignored return value in dvb_register_frontend()
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
ASoC: dt-bindings: wcd9335: fix reset line polarity in example
ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
NFSv4.2: Fix a memory stomp in decode_attr_security_label
NFSv4.2: Fix initialisation of struct nfs4_label
NFSv4: Fix a credential leak in _nfs4_discover_trunking()
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
NFS: Fix an Oops in nfs_d_automount()
ALSA: asihpi: fix missing pci_disable_device()
wifi: iwlwifi: mvm: fix double free on tx path.
ASoC: mediatek: mt8173: Fix debugfs registration for components
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
drm/amd/pm/smu11: BACO is supported when it's in BACO state
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
drm/amdkfd: Fix memory leakage
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
netfilter: conntrack: set icmpv6 redirects as RELATED
Input: wistron_btns - disable on UML
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes
bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
bonding: uninitialized variable in bond_miimon_inspect()
spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
wifi: mac80211: fix memory leak in ieee80211_if_add()
wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
mt76: stop the radar detector after leaving dfs channel
wifi: mt76: mt7921: fix reporting of TX AGGR histogram
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
regulator: core: fix module refcount leak in set_supply()
clk: qcom: lpass-sc7180: Fix pm_runtime usage
clk: qcom: clk-krait: fix wrong div2 functions
hsr: Add a rcu-read lock to hsr_forward_skb().
hsr: Avoid double remove of a node.
hsr: Disable netpoll.
hsr: Synchronize sending frames to have always incremented outgoing seq nr.
hsr: Synchronize sequence number updates.
configfs: fix possible memory leak in configfs_create_dir()
regulator: core: fix resource leak in regulator_register()
hwmon: (jc42) Convert register access and caching to regmap/regcache
hwmon: (jc42) Restore the min/max/critical temperatures on resume
bpf, sockmap: fix race in sock_map_free()
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
media: saa7164: fix missing pci_disable_device()
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
SUNRPC: Fix missing release socket in rpc_sockname()
NFSv4.x: Fail client initialisation if state manager thread can't run
riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC
mmc: alcor: fix return value check of mmc_add_host()
mmc: moxart: fix return value check of mmc_add_host()
mmc: mxcmmc: fix return value check of mmc_add_host()
mmc: pxamci: fix return value check of mmc_add_host()
mmc: rtsx_pci: fix return value check of mmc_add_host()
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
mmc: toshsd: fix return value check of mmc_add_host()
mmc: vub300: fix return value check of mmc_add_host()
mmc: wmt-sdmmc: fix return value check of mmc_add_host()
mmc: atmel-mci: fix return value check of mmc_add_host()
mmc: omap_hsmmc: fix return value check of mmc_add_host()
mmc: meson-gx: fix return value check of mmc_add_host()
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc: wbsd: fix return value check of mmc_add_host()
mmc: mmci: fix return value check of mmc_add_host()
mmc: renesas_sdhi: alway populate SCC pointer
memstick: ms_block: Add error handling support for add_disk()
memstick/ms_block: Add check for alloc_ordered_workqueue
mmc: core: Normalize the error handling branch in sd_read_ext_regs()
regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
media: c8sectpfe: Add of_node_put() when breaking out of loop
media: coda: Add check for dcoda_iram_alloc
media: coda: Add check for kmalloc
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
wifi: rtl8xxxu: Fix the channel width reporting
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
blktrace: Fix output non-blktrace event when blk_classic option enabled
bpf: Do not zero-extend kfunc return values
clk: socfpga: Fix memory leak in socfpga_gate_init()
net: vmw_vsock: vmci: Check memcpy_from_msg()
net: defxx: Fix missing err handling in dfx_init()
net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
net: stmmac: fix possible memory leak in stmmac_dvr_probe()
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
net: farsync: Fix kmemleak when rmmods farsync
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
af_unix: call proto_unregister() in the error path in af_unix_init()
net: amd-xgbe: Fix logic around active and passive cables
net: amd-xgbe: Check only the minimum speed for active/passive cables
can: tcan4x5x: Remove invalid write in clear_interrupts
can: m_can: Call the RAM init directly from m_can_chip_config
can: tcan4x5x: Fix use of register error status mask
net: lan9303: Fix read error execution path
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
sctp: sysctl: make extra pointers netns aware
Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
stmmac: fix potential division by 0
i40e: Fix the inability to attach XDP program on downed interface
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
apparmor: fix a memleak in multi_transaction_new()
apparmor: fix lockdep warning when removing a namespace
apparmor: Fix abi check to include v8 abi
crypto: hisilicon/qm - fix missing destroy qp_idr
crypto: sun8i-ss - use dma_addr instead u32
crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
scsi: core: Fix a race between scsi_done() and scsi_timeout()
apparmor: Use pointer to struct aa_label for lbs_cred
PCI: dwc: Fix n_fts[] array overrun
RDMA/core: Fix order of nldev_exit call
PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
f2fs: Fix the race condition of resize flag between resizefs
crypto: rockchip - do not do custom power management
crypto: rockchip - do not store mode globally
crypto: rockchip - add fallback for cipher
crypto: rockchip - add fallback for ahash
crypto: rockchip - better handle cipher key
crypto: rockchip - remove non-aligned handling
crypto: rockchip - rework by using crypto_engine
apparmor: Fix memleak in alloc_ns()
f2fs: fix to invalidate dcc->f2fs_issue_discard in error path
f2fs: fix normal discard process
f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()
RDMA/irdma: Report the correct link speed
scsi: qla2xxx: Fix set-but-not-used variable warnings
RDMA/siw: Fix immediate work request flush to completion queue
IB/mad: Don't call to function that might sleep while in atomic context
PCI: vmd: Disable MSI remapping after suspend
RDMA/restrack: Release MR restrack when delete
RDMA/core: Make sure "ib_port" is valid when access sysfs node
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
RDMA/siw: Set defined status for work completion with undefined status
scsi: scsi_debug: Fix a warning in resp_write_scat()
crypto: ccree - Remove debugfs when platform_driver_register failed
crypto: cryptd - Use request context instead of stack for sub-request
crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
RDMA/hns: Fix ext_sge num error when post send
PCI: Check for alloc failure in pci_request_irq()
RDMA/hfi: Decrease PCI device reference count in error path
crypto: ccree - Make cc_debugfs_global_fini() available for module init function
RDMA/hns: fix memory leak in hns_roce_alloc_mr()
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
dt-bindings: visconti-pcie: Fix interrupts array max constraints
scsi: hpsa: Fix possible memory leak in hpsa_init_one()
crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
padata: Always leave BHs disabled when running ->parallel()
padata: Fix list iterator in padata_do_serial()
scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
scsi: hpsa: Fix error handling in hpsa_add_sas_host()
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
scsi: efct: Fix possible memleak in efct_device_init()
scsi: scsi_debug: Fix a warning in resp_verify()
scsi: scsi_debug: Fix a warning in resp_report_zones()
scsi: fcoe: Fix possible name leak when device_register() fails
scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
scsi: ipr: Fix WARNING in ipr_init()
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: snic: Fix possible UAF in snic_tgt_create()
RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
f2fs: avoid victim selection from previous victim section
RDMA/nldev: Fix failure to send large messages
crypto: amlogic - Remove kcalloc without check
crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()
riscv/mm: add arch hook arch_clear_hugepage_flags
RDMA/hfi1: Fix error return code in parse_platform_config()
RDMA/srp: Fix error return code in srp_parse_options()
PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_
PCI: mt7621: Add sentinel to quirks table
orangefs: Fix sysfs not cleanup when dev init failed
RDMA/hns: Fix AH attr queried by query_qp
RDMA/hns: Fix PBL page MTR find
RDMA/hns: Fix page size cap from firmware
RDMA/hns: Fix error code of CMD
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
hwrng: amd - Fix PCI device refcount leak
hwrng: geode - Fix PCI device refcount leak
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
RISC-V: Align the shadow stack
drivers: dio: fix possible memory leak in dio_init()
serial: tegra: Read DMA status before terminating
serial: 8250_bcm7271: Fix error handling in brcmuart_init()
class: fix possible memory leak in __class_register()
vfio: platform: Do not pass return buffer to ACPI _RST method
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
uio: uio_dmem_genirq: Fix deadlock between irq config and handling
usb: fotg210-udc: Fix ages old endianness issues
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails
usb: typec: tipd: Fix spurious fwnode_handle_put in error path
extcon: usbc-tusb320: Add support for mode setting and reset
extcon: usbc-tusb320: Add support for TUSB320L
usb: typec: Factor out non-PD fwnode properties
extcon: usbc-tusb320: Factor out extcon into dedicated functions
extcon: usbc-tusb320: Add USB TYPE-C support
extcon: usbc-tusb320: Update state on probe even if no IRQ pending
serial: amba-pl011: avoid SBSA UART accessing DMACR register
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: stm32: move dma_request_chan() before clk_prepare_enable()
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: clean up stop-tx part in altera_uart_tx_chars()
tty: serial: altera_uart_{r,t}x_chars() need only uart_port
serial: altera_uart: fix locking in polling mode
serial: sunsab: Fix error handling in sunsab_init()
test_firmware: fix memory leak in test_firmware_init()
misc: ocxl: fix possible name leak in ocxl_file_register_afu()
ocxl: fix pci device refcount leak when calling get_function_0()
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
iio: temperature: ltc2983: make bulk write buffer DMA-safe
iio: adis: handle devices that cannot unmask the drdy pin
iio: adis: stylistic changes
iio:imu:adis: Move exports into IIO_ADISLIB namespace
iio: adis: add '__adis_enable_irq()' implementation
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
coresight: trbe: remove cpuhp instance node before remove cpuhp state
usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
usb: gadget: f_hid: fix refcount leak on error path
drivers: mcb: fix resource leak in mcb_probe()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
chardev: fix error handling in cdev_device_add()
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
staging: rtl8192u: Fix use after free in ieee80211_rx()
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
vme: Fix error not catched in fake_init()
gpiolib: Get rid of redundant 'else'
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: make struct comments into real kernel docs
gpiolib: protect the GPIO device against being dropped while in use by user-space
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
usb: storage: Add check for kcalloc
tracing/hist: Fix issue of losting command info in error_log
ksmbd: Fix resource leak in ksmbd_session_rpc_open()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
thermal/drivers/imx8mm_thermal: Validate temperature range
thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
thermal/drivers/qcom/lmh: Fix irq handler return value
fbdev: ssd1307fb: Drop optional dependency
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: via: Fix error in via_core_init()
fbdev: vermilion: decrease reference count in error path
fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
fbdev: geode: don't build on UML
fbdev: uvesafb: don't build on UML
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
power: supply: fix residue sysfs file in error handle route of __power_supply_register()
perf trace: Return error if a system call doesn't exist
perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
perf trace: Handle failure when trace point folder is missed
perf symbol: correction while adjusting symbol
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
HSI: omap_ssi_core: Fix error handling in ssi_init()
power: supply: ab8500: Fix error handling in ab8500_charger_init()
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
perf stat: Refactor __run_perf_stat() common code
perf stat: Do not delay the workload with --delay
RDMA/siw: Fix pointer cast warning
fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()
overflow: Implement size_t saturating arithmetic helpers
fs/ntfs3: Harden against integer overflows
iommu/sun50i: Fix reset release
iommu/sun50i: Consider all fault sources for reset
iommu/sun50i: Fix R/W permission check
iommu/sun50i: Fix flush size
iommu/rockchip: fix permission bits in page table entries v2
phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
include/uapi/linux/swab: Fix potentially missing __always_inline
pwm: tegra: Improve required rate calculation
fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs
dmaengine: idxd: Fix crc_val field for completion record
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: cmos: Fix event handler registration ordering issue
rtc: cmos: Fix wake alarm breakage
rtc: cmos: fix build on non-ACPI platforms
rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
rtc: cmos: Eliminate forward declarations of some functions
rtc: cmos: Rename ACPI-related functions
rtc: cmos: Disable ACPI RTC event on removal
rtc: snvs: Allow a time difference on clock register read
rtc: pcf85063: Fix reading alarm
iommu/amd: Fix pci device refcount leak in ppr_notifier()
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
macintosh: fix possible memory leak in macio_add_one_device()
macintosh/macio-adb: check the return value of ioremap()
powerpc/52xx: Fix a resource leak in an error handling path
cxl: Fix refcount leak in cxl_calc_capp_routing
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
powerpc/perf: callchain validate kernel stack pointer bounds
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
powerpc/hv-gpci: Fix hv_gpci event list
selftests/powerpc: Fix resource leaks
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm
pwm: mediatek: always use bus clock for PWM on MT7622
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/pseries/eeh: use correct API for error log size
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: pm8008: Remove driver data structure pm8008_data
mfd: pm8008: Fix return value check in pm8008_probe()
netfilter: flowtable: really fix NAT IPv6 offload
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
rtc: pcf85063: fix pcf85063_clkout_control
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
net: macsec: fix net device access prior to holding a lock
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
block, bfq: fix possible uaf for 'bfqq->bic'
selftests/bpf: Add test for unstable CT lookup API
net: enetc: avoid buffer leaks on xdp_do_redirect() failure
nfc: pn533: Clear nfc_target before being used
unix: Fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
r6040: Fix kmemleak in probe and remove
igc: Enhance Qbv scheduling by using first flag bit
igc: Use strict cycles for Qbv scheduling
igc: Add checking for basetime less than zero
igc: allow BaseTime 0 enrollment for Qbv
igc: recalculate Qbv end_time by considering cycle time
igc: Lift TAPRIO schedule restriction
igc: Set Qbv start_time and end_time to end_time if not being configured in GCL
rtc: mxc_v2: Add missing clk_disable_unprepare()
selftests: devlink: fix the fd redirect in dummy_reporter_test
openvswitch: Fix flow lookup to use unmasked key
soc: mediatek: pm-domains: Fix the power glitch issue
arm64: dts: mt8183: Fix Mali GPU clock
skbuff: Account for tail adjustment during pull operations
mailbox: mpfs: read the system controller's status
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
mailbox: zynq-ipi: fix error handling while device_register() fails
net_sched: reject TCF_EM_SIMPLE case for complex ematch module
rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
myri10ge: Fix an error handling path in myri10ge_probe()
net: stream: purge sk_error_queue in sk_stream_kill_queues()
HID: amd_sfh: Add missing check for dma_alloc_coherent
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
arm64: make is_ttbrX_addr() noinstr-safe
video: hyperv_fb: Avoid taking busy spinlock on panic path
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
binfmt_misc: fix shift-out-of-bounds in check_special_flags
fs: jfs: fix shift-out-of-bounds in dbAllocAG
udf: Avoid double brelse() in udf_rename()
jfs: Fix fortify moan in symlink
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
ACPICA: Fix error code path in acpi_ds_call_control_method()
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
acct: fix potential integer overflow in encode_comp_t()
hfs: fix OOB Read in __hfs_brec_find
drm/etnaviv: add missing quirks for GC300
media: imx-jpeg: Disable useless interrupt to avoid kernel panic
brcmfmac: return error when getting invalid max_flowrings from dongle
wifi: ath9k: verify the expected usb_endpoints are present
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
ipmi: fix memleak when unload ipmi driver
drm/amd/display: prevent memory leak
Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"
qed (gcc13): use u16 for fid to be big enough
bpf: make sure skb->len != 0 when redirecting to a tunneling device
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
hamradio: baycom_epp: Fix return type of baycom_send_packet()
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
igb: Do not free q_vector unless new one was allocated
drm/amdgpu: Fix type of second parameter in trans_msg() callback
drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
s390/ctcm: Fix return type of ctc{mp,}m_tx()
s390/netiucv: Fix return type of netiucv_tx()
s390/lcs: Fix return type of lcs_start_xmit()
drm/msm: Use drm_mode_copy()
drm/rockchip: Use drm_mode_copy()
drm/sti: Use drm_mode_copy()
drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
md/raid1: stop mdx_raid1 thread when raid1 array run failed
drm/amd/display: fix array index out of bound error in bios parser
net: add atomic_long_t to net_device_stats fields
ipv6/sit: use DEV_STATS_INC() to avoid data-races
mrp: introduce active flags to prevent UAF when applicant uninit
ppp: associate skb with a device at tx
bpf: Prevent decl_tag from being referenced in func_proto arg
ethtool: avoiding integer overflow in ethtool_phys_id()
media: dvb-frontends: fix leak of memory fw
media: dvbdev: adopts refcnt to avoid UAF
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
blk-mq: fix possible memleak when register 'hctx' failed
drm/amd/display: Use the largest vready_offset in pipe group
libbpf: Avoid enum forward-declarations in public API in C++ mode
regulator: core: fix use_count leakage when handling boot-on
wifi: mt76: do not run mt76u_status_worker if the device is not running
mmc: f-sdh30: Add quirks for broken timeout clock capability
mmc: renesas_sdhi: better reset from HS400 mode
media: si470x: Fix use-after-free in si470x_int_in_callback()
clk: st: Fix memory leak in st_of_quadfs_setup()
crypto: hisilicon/hpre - fix resource leak in remove process
scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs
scsi: ufs: Reduce the START STOP UNIT timeout
scsi: elx: libefc: Fix second parameter type in state callbacks
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
tools/include: Add _RET_IP_ and math definitions to kernel.h
KVM: selftests: Fix build regression by using accessor function
hwmon: (jc42) Fix missing unlock on error in jc42_write()
ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
ALSA: hda: add snd_hdac_stop_streams() helper
ASoC: Intel: Skylake: Fix driver hang during shutdown
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
ASoC: wm8994: Fix potential deadlock
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: rt5670: Remove unbalanced pm_runtime_put()
drm/i915/display: Don't disable DDI/Transcoder when setting phy test pattern
LoadPin: Ignore the "contents" argument of the LSM hooks
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
afs: Fix lost servers_outstanding count
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
ima: Simplify ima_lsm_copy_rule
ALSA: usb-audio: add the quirk for KT0206 device
ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
usb: cdnsp: fix lack of ZLP for ep0
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
arm64: dts: qcom: sm8250: fix USB-DP PHY registers
usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
usb: dwc3: core: defer probe on ulpi_read_id timeout
xhci: Prevent infinite loop in transaction errors recovery for streams
HID: wacom: Ensure bootloader PID is usable in hidraw mode
HID: mcp2221: don't connect hidraw
loop: Fix the max_loop commandline argument treatment when it is set to 0
9p: set req refcount to zero to avoid uninitialized usage
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
reiserfs: Add missing calls to reiserfs_security_free()
iio: fix memory leak in iio_device_register_eventset()
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
iio: adc128s052: add proper .data members in adc128_of_match table
regulator: core: fix deadlock on regulator enable
floppy: Fix memory leak in do_floppy_init()
gcov: add support for checksum field
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
ovl: fix use inode directly in rcu-walk mode
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
scsi: qla2xxx: Fix crash when I/O abort times out
net: stmmac: fix errno when create_singlethread_workqueue() fails
media: dvbdev: fix build warning due to comments
media: dvbdev: fix refcnt bug
extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
pwm: tegra: Fix 32 bit build
Linux 5.15.86
Change-Id: Ic157edd6a65abf4a3167b5d227edeb0564f1be4e
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
3898 lines
105 KiB
C
3898 lines
105 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2007 Oracle. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/fs.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/time.h>
|
|
#include <linux/init.h>
|
|
#include <linux/string.h>
|
|
#include <linux/backing-dev.h>
|
|
#include <linux/falloc.h>
|
|
#include <linux/writeback.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/btrfs.h>
|
|
#include <linux/uio.h>
|
|
#include <linux/iversion.h>
|
|
#include <linux/fsverity.h>
|
|
#include "ctree.h"
|
|
#include "disk-io.h"
|
|
#include "transaction.h"
|
|
#include "btrfs_inode.h"
|
|
#include "print-tree.h"
|
|
#include "tree-log.h"
|
|
#include "locking.h"
|
|
#include "volumes.h"
|
|
#include "qgroup.h"
|
|
#include "compression.h"
|
|
#include "delalloc-space.h"
|
|
#include "reflink.h"
|
|
#include "subpage.h"
|
|
|
|
static struct kmem_cache *btrfs_inode_defrag_cachep;
|
|
/*
|
|
* when auto defrag is enabled we
|
|
* queue up these defrag structs to remember which
|
|
* inodes need defragging passes
|
|
*/
|
|
struct inode_defrag {
|
|
struct rb_node rb_node;
|
|
/* objectid */
|
|
u64 ino;
|
|
/*
|
|
* transid where the defrag was added, we search for
|
|
* extents newer than this
|
|
*/
|
|
u64 transid;
|
|
|
|
/* root objectid */
|
|
u64 root;
|
|
|
|
/* last offset we were able to defrag */
|
|
u64 last_offset;
|
|
|
|
/* if we've wrapped around back to zero once already */
|
|
int cycled;
|
|
};
|
|
|
|
static int __compare_inode_defrag(struct inode_defrag *defrag1,
|
|
struct inode_defrag *defrag2)
|
|
{
|
|
if (defrag1->root > defrag2->root)
|
|
return 1;
|
|
else if (defrag1->root < defrag2->root)
|
|
return -1;
|
|
else if (defrag1->ino > defrag2->ino)
|
|
return 1;
|
|
else if (defrag1->ino < defrag2->ino)
|
|
return -1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* pop a record for an inode into the defrag tree. The lock
|
|
* must be held already
|
|
*
|
|
* If you're inserting a record for an older transid than an
|
|
* existing record, the transid already in the tree is lowered
|
|
*
|
|
* If an existing record is found the defrag item you
|
|
* pass in is freed
|
|
*/
|
|
static int __btrfs_add_inode_defrag(struct btrfs_inode *inode,
|
|
struct inode_defrag *defrag)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
struct inode_defrag *entry;
|
|
struct rb_node **p;
|
|
struct rb_node *parent = NULL;
|
|
int ret;
|
|
|
|
p = &fs_info->defrag_inodes.rb_node;
|
|
while (*p) {
|
|
parent = *p;
|
|
entry = rb_entry(parent, struct inode_defrag, rb_node);
|
|
|
|
ret = __compare_inode_defrag(defrag, entry);
|
|
if (ret < 0)
|
|
p = &parent->rb_left;
|
|
else if (ret > 0)
|
|
p = &parent->rb_right;
|
|
else {
|
|
/* if we're reinserting an entry for
|
|
* an old defrag run, make sure to
|
|
* lower the transid of our existing record
|
|
*/
|
|
if (defrag->transid < entry->transid)
|
|
entry->transid = defrag->transid;
|
|
if (defrag->last_offset > entry->last_offset)
|
|
entry->last_offset = defrag->last_offset;
|
|
return -EEXIST;
|
|
}
|
|
}
|
|
set_bit(BTRFS_INODE_IN_DEFRAG, &inode->runtime_flags);
|
|
rb_link_node(&defrag->rb_node, parent, p);
|
|
rb_insert_color(&defrag->rb_node, &fs_info->defrag_inodes);
|
|
return 0;
|
|
}
|
|
|
|
static inline int __need_auto_defrag(struct btrfs_fs_info *fs_info)
|
|
{
|
|
if (!btrfs_test_opt(fs_info, AUTO_DEFRAG))
|
|
return 0;
|
|
|
|
if (btrfs_fs_closing(fs_info))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* insert a defrag record for this inode if auto defrag is
|
|
* enabled
|
|
*/
|
|
int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans,
|
|
struct btrfs_inode *inode)
|
|
{
|
|
struct btrfs_root *root = inode->root;
|
|
struct btrfs_fs_info *fs_info = root->fs_info;
|
|
struct inode_defrag *defrag;
|
|
u64 transid;
|
|
int ret;
|
|
|
|
if (!__need_auto_defrag(fs_info))
|
|
return 0;
|
|
|
|
if (test_bit(BTRFS_INODE_IN_DEFRAG, &inode->runtime_flags))
|
|
return 0;
|
|
|
|
if (trans)
|
|
transid = trans->transid;
|
|
else
|
|
transid = inode->root->last_trans;
|
|
|
|
defrag = kmem_cache_zalloc(btrfs_inode_defrag_cachep, GFP_NOFS);
|
|
if (!defrag)
|
|
return -ENOMEM;
|
|
|
|
defrag->ino = btrfs_ino(inode);
|
|
defrag->transid = transid;
|
|
defrag->root = root->root_key.objectid;
|
|
|
|
spin_lock(&fs_info->defrag_inodes_lock);
|
|
if (!test_bit(BTRFS_INODE_IN_DEFRAG, &inode->runtime_flags)) {
|
|
/*
|
|
* If we set IN_DEFRAG flag and evict the inode from memory,
|
|
* and then re-read this inode, this new inode doesn't have
|
|
* IN_DEFRAG flag. At the case, we may find the existed defrag.
|
|
*/
|
|
ret = __btrfs_add_inode_defrag(inode, defrag);
|
|
if (ret)
|
|
kmem_cache_free(btrfs_inode_defrag_cachep, defrag);
|
|
} else {
|
|
kmem_cache_free(btrfs_inode_defrag_cachep, defrag);
|
|
}
|
|
spin_unlock(&fs_info->defrag_inodes_lock);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Requeue the defrag object. If there is a defrag object that points to
|
|
* the same inode in the tree, we will merge them together (by
|
|
* __btrfs_add_inode_defrag()) and free the one that we want to requeue.
|
|
*/
|
|
static void btrfs_requeue_inode_defrag(struct btrfs_inode *inode,
|
|
struct inode_defrag *defrag)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
int ret;
|
|
|
|
if (!__need_auto_defrag(fs_info))
|
|
goto out;
|
|
|
|
/*
|
|
* Here we don't check the IN_DEFRAG flag, because we need merge
|
|
* them together.
|
|
*/
|
|
spin_lock(&fs_info->defrag_inodes_lock);
|
|
ret = __btrfs_add_inode_defrag(inode, defrag);
|
|
spin_unlock(&fs_info->defrag_inodes_lock);
|
|
if (ret)
|
|
goto out;
|
|
return;
|
|
out:
|
|
kmem_cache_free(btrfs_inode_defrag_cachep, defrag);
|
|
}
|
|
|
|
/*
|
|
* pick the defragable inode that we want, if it doesn't exist, we will get
|
|
* the next one.
|
|
*/
|
|
static struct inode_defrag *
|
|
btrfs_pick_defrag_inode(struct btrfs_fs_info *fs_info, u64 root, u64 ino)
|
|
{
|
|
struct inode_defrag *entry = NULL;
|
|
struct inode_defrag tmp;
|
|
struct rb_node *p;
|
|
struct rb_node *parent = NULL;
|
|
int ret;
|
|
|
|
tmp.ino = ino;
|
|
tmp.root = root;
|
|
|
|
spin_lock(&fs_info->defrag_inodes_lock);
|
|
p = fs_info->defrag_inodes.rb_node;
|
|
while (p) {
|
|
parent = p;
|
|
entry = rb_entry(parent, struct inode_defrag, rb_node);
|
|
|
|
ret = __compare_inode_defrag(&tmp, entry);
|
|
if (ret < 0)
|
|
p = parent->rb_left;
|
|
else if (ret > 0)
|
|
p = parent->rb_right;
|
|
else
|
|
goto out;
|
|
}
|
|
|
|
if (parent && __compare_inode_defrag(&tmp, entry) > 0) {
|
|
parent = rb_next(parent);
|
|
if (parent)
|
|
entry = rb_entry(parent, struct inode_defrag, rb_node);
|
|
else
|
|
entry = NULL;
|
|
}
|
|
out:
|
|
if (entry)
|
|
rb_erase(parent, &fs_info->defrag_inodes);
|
|
spin_unlock(&fs_info->defrag_inodes_lock);
|
|
return entry;
|
|
}
|
|
|
|
void btrfs_cleanup_defrag_inodes(struct btrfs_fs_info *fs_info)
|
|
{
|
|
struct inode_defrag *defrag;
|
|
struct rb_node *node;
|
|
|
|
spin_lock(&fs_info->defrag_inodes_lock);
|
|
node = rb_first(&fs_info->defrag_inodes);
|
|
while (node) {
|
|
rb_erase(node, &fs_info->defrag_inodes);
|
|
defrag = rb_entry(node, struct inode_defrag, rb_node);
|
|
kmem_cache_free(btrfs_inode_defrag_cachep, defrag);
|
|
|
|
cond_resched_lock(&fs_info->defrag_inodes_lock);
|
|
|
|
node = rb_first(&fs_info->defrag_inodes);
|
|
}
|
|
spin_unlock(&fs_info->defrag_inodes_lock);
|
|
}
|
|
|
|
#define BTRFS_DEFRAG_BATCH 1024
|
|
|
|
static int __btrfs_run_defrag_inode(struct btrfs_fs_info *fs_info,
|
|
struct inode_defrag *defrag)
|
|
{
|
|
struct btrfs_root *inode_root;
|
|
struct inode *inode;
|
|
struct btrfs_ioctl_defrag_range_args range;
|
|
int num_defrag;
|
|
int ret;
|
|
|
|
/* get the inode */
|
|
inode_root = btrfs_get_fs_root(fs_info, defrag->root, true);
|
|
if (IS_ERR(inode_root)) {
|
|
ret = PTR_ERR(inode_root);
|
|
goto cleanup;
|
|
}
|
|
|
|
inode = btrfs_iget(fs_info->sb, defrag->ino, inode_root);
|
|
btrfs_put_root(inode_root);
|
|
if (IS_ERR(inode)) {
|
|
ret = PTR_ERR(inode);
|
|
goto cleanup;
|
|
}
|
|
|
|
/* do a chunk of defrag */
|
|
clear_bit(BTRFS_INODE_IN_DEFRAG, &BTRFS_I(inode)->runtime_flags);
|
|
memset(&range, 0, sizeof(range));
|
|
range.len = (u64)-1;
|
|
range.start = defrag->last_offset;
|
|
|
|
sb_start_write(fs_info->sb);
|
|
num_defrag = btrfs_defrag_file(inode, NULL, &range, defrag->transid,
|
|
BTRFS_DEFRAG_BATCH);
|
|
sb_end_write(fs_info->sb);
|
|
/*
|
|
* if we filled the whole defrag batch, there
|
|
* must be more work to do. Queue this defrag
|
|
* again
|
|
*/
|
|
if (num_defrag == BTRFS_DEFRAG_BATCH) {
|
|
defrag->last_offset = range.start;
|
|
btrfs_requeue_inode_defrag(BTRFS_I(inode), defrag);
|
|
} else if (defrag->last_offset && !defrag->cycled) {
|
|
/*
|
|
* we didn't fill our defrag batch, but
|
|
* we didn't start at zero. Make sure we loop
|
|
* around to the start of the file.
|
|
*/
|
|
defrag->last_offset = 0;
|
|
defrag->cycled = 1;
|
|
btrfs_requeue_inode_defrag(BTRFS_I(inode), defrag);
|
|
} else {
|
|
kmem_cache_free(btrfs_inode_defrag_cachep, defrag);
|
|
}
|
|
|
|
iput(inode);
|
|
return 0;
|
|
cleanup:
|
|
kmem_cache_free(btrfs_inode_defrag_cachep, defrag);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* run through the list of inodes in the FS that need
|
|
* defragging
|
|
*/
|
|
int btrfs_run_defrag_inodes(struct btrfs_fs_info *fs_info)
|
|
{
|
|
struct inode_defrag *defrag;
|
|
u64 first_ino = 0;
|
|
u64 root_objectid = 0;
|
|
|
|
atomic_inc(&fs_info->defrag_running);
|
|
while (1) {
|
|
/* Pause the auto defragger. */
|
|
if (test_bit(BTRFS_FS_STATE_REMOUNTING,
|
|
&fs_info->fs_state))
|
|
break;
|
|
|
|
if (!__need_auto_defrag(fs_info))
|
|
break;
|
|
|
|
/* find an inode to defrag */
|
|
defrag = btrfs_pick_defrag_inode(fs_info, root_objectid,
|
|
first_ino);
|
|
if (!defrag) {
|
|
if (root_objectid || first_ino) {
|
|
root_objectid = 0;
|
|
first_ino = 0;
|
|
continue;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
first_ino = defrag->ino + 1;
|
|
root_objectid = defrag->root;
|
|
|
|
__btrfs_run_defrag_inode(fs_info, defrag);
|
|
}
|
|
atomic_dec(&fs_info->defrag_running);
|
|
|
|
/*
|
|
* during unmount, we use the transaction_wait queue to
|
|
* wait for the defragger to stop
|
|
*/
|
|
wake_up(&fs_info->transaction_wait);
|
|
return 0;
|
|
}
|
|
|
|
/* simple helper to fault in pages and copy. This should go away
|
|
* and be replaced with calls into generic code.
|
|
*/
|
|
static noinline int btrfs_copy_from_user(loff_t pos, size_t write_bytes,
|
|
struct page **prepared_pages,
|
|
struct iov_iter *i)
|
|
{
|
|
size_t copied = 0;
|
|
size_t total_copied = 0;
|
|
int pg = 0;
|
|
int offset = offset_in_page(pos);
|
|
|
|
while (write_bytes > 0) {
|
|
size_t count = min_t(size_t,
|
|
PAGE_SIZE - offset, write_bytes);
|
|
struct page *page = prepared_pages[pg];
|
|
/*
|
|
* Copy data from userspace to the current page
|
|
*/
|
|
copied = copy_page_from_iter_atomic(page, offset, count, i);
|
|
|
|
/* Flush processor's dcache for this page */
|
|
flush_dcache_page(page);
|
|
|
|
/*
|
|
* if we get a partial write, we can end up with
|
|
* partially up to date pages. These add
|
|
* a lot of complexity, so make sure they don't
|
|
* happen by forcing this copy to be retried.
|
|
*
|
|
* The rest of the btrfs_file_write code will fall
|
|
* back to page at a time copies after we return 0.
|
|
*/
|
|
if (unlikely(copied < count)) {
|
|
if (!PageUptodate(page)) {
|
|
iov_iter_revert(i, copied);
|
|
copied = 0;
|
|
}
|
|
if (!copied)
|
|
break;
|
|
}
|
|
|
|
write_bytes -= copied;
|
|
total_copied += copied;
|
|
offset += copied;
|
|
if (offset == PAGE_SIZE) {
|
|
pg++;
|
|
offset = 0;
|
|
}
|
|
}
|
|
return total_copied;
|
|
}
|
|
|
|
/*
|
|
* unlocks pages after btrfs_file_write is done with them
|
|
*/
|
|
static void btrfs_drop_pages(struct page **pages, size_t num_pages)
|
|
{
|
|
size_t i;
|
|
for (i = 0; i < num_pages; i++) {
|
|
/* page checked is some magic around finding pages that
|
|
* have been modified without going through btrfs_set_page_dirty
|
|
* clear it here. There should be no need to mark the pages
|
|
* accessed as prepare_pages should have marked them accessed
|
|
* in prepare_pages via find_or_create_page()
|
|
*/
|
|
ClearPageChecked(pages[i]);
|
|
unlock_page(pages[i]);
|
|
put_page(pages[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* After btrfs_copy_from_user(), update the following things for delalloc:
|
|
* - Mark newly dirtied pages as DELALLOC in the io tree.
|
|
* Used to advise which range is to be written back.
|
|
* - Mark modified pages as Uptodate/Dirty and not needing COW fixup
|
|
* - Update inode size for past EOF write
|
|
*/
|
|
int btrfs_dirty_pages(struct btrfs_inode *inode, struct page **pages,
|
|
size_t num_pages, loff_t pos, size_t write_bytes,
|
|
struct extent_state **cached, bool noreserve)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
int err = 0;
|
|
int i;
|
|
u64 num_bytes;
|
|
u64 start_pos;
|
|
u64 end_of_last_block;
|
|
u64 end_pos = pos + write_bytes;
|
|
loff_t isize = i_size_read(&inode->vfs_inode);
|
|
unsigned int extra_bits = 0;
|
|
|
|
if (write_bytes == 0)
|
|
return 0;
|
|
|
|
if (noreserve)
|
|
extra_bits |= EXTENT_NORESERVE;
|
|
|
|
start_pos = round_down(pos, fs_info->sectorsize);
|
|
num_bytes = round_up(write_bytes + pos - start_pos,
|
|
fs_info->sectorsize);
|
|
ASSERT(num_bytes <= U32_MAX);
|
|
|
|
end_of_last_block = start_pos + num_bytes - 1;
|
|
|
|
/*
|
|
* The pages may have already been dirty, clear out old accounting so
|
|
* we can set things up properly
|
|
*/
|
|
clear_extent_bit(&inode->io_tree, start_pos, end_of_last_block,
|
|
EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | EXTENT_DEFRAG,
|
|
0, 0, cached);
|
|
|
|
err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block,
|
|
extra_bits, cached);
|
|
if (err)
|
|
return err;
|
|
|
|
for (i = 0; i < num_pages; i++) {
|
|
struct page *p = pages[i];
|
|
|
|
btrfs_page_clamp_set_uptodate(fs_info, p, start_pos, num_bytes);
|
|
ClearPageChecked(p);
|
|
btrfs_page_clamp_set_dirty(fs_info, p, start_pos, num_bytes);
|
|
}
|
|
|
|
/*
|
|
* we've only changed i_size in ram, and we haven't updated
|
|
* the disk i_size. There is no need to log the inode
|
|
* at this time.
|
|
*/
|
|
if (end_pos > isize)
|
|
i_size_write(&inode->vfs_inode, end_pos);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* this drops all the extents in the cache that intersect the range
|
|
* [start, end]. Existing extents are split as required.
|
|
*/
|
|
void btrfs_drop_extent_cache(struct btrfs_inode *inode, u64 start, u64 end,
|
|
int skip_pinned)
|
|
{
|
|
struct extent_map *em;
|
|
struct extent_map *split = NULL;
|
|
struct extent_map *split2 = NULL;
|
|
struct extent_map_tree *em_tree = &inode->extent_tree;
|
|
u64 len = end - start + 1;
|
|
u64 gen;
|
|
int ret;
|
|
int testend = 1;
|
|
unsigned long flags;
|
|
int compressed = 0;
|
|
bool modified;
|
|
|
|
WARN_ON(end < start);
|
|
if (end == (u64)-1) {
|
|
len = (u64)-1;
|
|
testend = 0;
|
|
}
|
|
while (1) {
|
|
int no_splits = 0;
|
|
|
|
modified = false;
|
|
if (!split)
|
|
split = alloc_extent_map();
|
|
if (!split2)
|
|
split2 = alloc_extent_map();
|
|
if (!split || !split2)
|
|
no_splits = 1;
|
|
|
|
write_lock(&em_tree->lock);
|
|
em = lookup_extent_mapping(em_tree, start, len);
|
|
if (!em) {
|
|
write_unlock(&em_tree->lock);
|
|
break;
|
|
}
|
|
flags = em->flags;
|
|
gen = em->generation;
|
|
if (skip_pinned && test_bit(EXTENT_FLAG_PINNED, &em->flags)) {
|
|
if (testend && em->start + em->len >= start + len) {
|
|
free_extent_map(em);
|
|
write_unlock(&em_tree->lock);
|
|
break;
|
|
}
|
|
start = em->start + em->len;
|
|
if (testend)
|
|
len = start + len - (em->start + em->len);
|
|
free_extent_map(em);
|
|
write_unlock(&em_tree->lock);
|
|
continue;
|
|
}
|
|
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
|
|
clear_bit(EXTENT_FLAG_PINNED, &em->flags);
|
|
clear_bit(EXTENT_FLAG_LOGGING, &flags);
|
|
modified = !list_empty(&em->list);
|
|
if (no_splits)
|
|
goto next;
|
|
|
|
if (em->start < start) {
|
|
split->start = em->start;
|
|
split->len = start - em->start;
|
|
|
|
if (em->block_start < EXTENT_MAP_LAST_BYTE) {
|
|
split->orig_start = em->orig_start;
|
|
split->block_start = em->block_start;
|
|
|
|
if (compressed)
|
|
split->block_len = em->block_len;
|
|
else
|
|
split->block_len = split->len;
|
|
split->orig_block_len = max(split->block_len,
|
|
em->orig_block_len);
|
|
split->ram_bytes = em->ram_bytes;
|
|
} else {
|
|
split->orig_start = split->start;
|
|
split->block_len = 0;
|
|
split->block_start = em->block_start;
|
|
split->orig_block_len = 0;
|
|
split->ram_bytes = split->len;
|
|
}
|
|
|
|
split->generation = gen;
|
|
split->flags = flags;
|
|
split->compress_type = em->compress_type;
|
|
replace_extent_mapping(em_tree, em, split, modified);
|
|
free_extent_map(split);
|
|
split = split2;
|
|
split2 = NULL;
|
|
}
|
|
if (testend && em->start + em->len > start + len) {
|
|
u64 diff = start + len - em->start;
|
|
|
|
split->start = start + len;
|
|
split->len = em->start + em->len - (start + len);
|
|
split->flags = flags;
|
|
split->compress_type = em->compress_type;
|
|
split->generation = gen;
|
|
|
|
if (em->block_start < EXTENT_MAP_LAST_BYTE) {
|
|
split->orig_block_len = max(em->block_len,
|
|
em->orig_block_len);
|
|
|
|
split->ram_bytes = em->ram_bytes;
|
|
if (compressed) {
|
|
split->block_len = em->block_len;
|
|
split->block_start = em->block_start;
|
|
split->orig_start = em->orig_start;
|
|
} else {
|
|
split->block_len = split->len;
|
|
split->block_start = em->block_start
|
|
+ diff;
|
|
split->orig_start = em->orig_start;
|
|
}
|
|
} else {
|
|
split->ram_bytes = split->len;
|
|
split->orig_start = split->start;
|
|
split->block_len = 0;
|
|
split->block_start = em->block_start;
|
|
split->orig_block_len = 0;
|
|
}
|
|
|
|
if (extent_map_in_tree(em)) {
|
|
replace_extent_mapping(em_tree, em, split,
|
|
modified);
|
|
} else {
|
|
ret = add_extent_mapping(em_tree, split,
|
|
modified);
|
|
ASSERT(ret == 0); /* Logic error */
|
|
}
|
|
free_extent_map(split);
|
|
split = NULL;
|
|
}
|
|
next:
|
|
if (extent_map_in_tree(em))
|
|
remove_extent_mapping(em_tree, em);
|
|
write_unlock(&em_tree->lock);
|
|
|
|
/* once for us */
|
|
free_extent_map(em);
|
|
/* once for the tree*/
|
|
free_extent_map(em);
|
|
}
|
|
if (split)
|
|
free_extent_map(split);
|
|
if (split2)
|
|
free_extent_map(split2);
|
|
}
|
|
|
|
/*
|
|
* this is very complex, but the basic idea is to drop all extents
|
|
* in the range start - end. hint_block is filled in with a block number
|
|
* that would be a good hint to the block allocator for this file.
|
|
*
|
|
* If an extent intersects the range but is not entirely inside the range
|
|
* it is either truncated or split. Anything entirely inside the range
|
|
* is deleted from the tree.
|
|
*
|
|
* Note: the VFS' inode number of bytes is not updated, it's up to the caller
|
|
* to deal with that. We set the field 'bytes_found' of the arguments structure
|
|
* with the number of allocated bytes found in the target range, so that the
|
|
* caller can update the inode's number of bytes in an atomic way when
|
|
* replacing extents in a range to avoid races with stat(2).
|
|
*/
|
|
int btrfs_drop_extents(struct btrfs_trans_handle *trans,
|
|
struct btrfs_root *root, struct btrfs_inode *inode,
|
|
struct btrfs_drop_extents_args *args)
|
|
{
|
|
struct btrfs_fs_info *fs_info = root->fs_info;
|
|
struct extent_buffer *leaf;
|
|
struct btrfs_file_extent_item *fi;
|
|
struct btrfs_ref ref = { 0 };
|
|
struct btrfs_key key;
|
|
struct btrfs_key new_key;
|
|
u64 ino = btrfs_ino(inode);
|
|
u64 search_start = args->start;
|
|
u64 disk_bytenr = 0;
|
|
u64 num_bytes = 0;
|
|
u64 extent_offset = 0;
|
|
u64 extent_end = 0;
|
|
u64 last_end = args->start;
|
|
int del_nr = 0;
|
|
int del_slot = 0;
|
|
int extent_type;
|
|
int recow;
|
|
int ret;
|
|
int modify_tree = -1;
|
|
int update_refs;
|
|
int found = 0;
|
|
int leafs_visited = 0;
|
|
struct btrfs_path *path = args->path;
|
|
|
|
args->bytes_found = 0;
|
|
args->extent_inserted = false;
|
|
|
|
/* Must always have a path if ->replace_extent is true */
|
|
ASSERT(!(args->replace_extent && !args->path));
|
|
|
|
if (!path) {
|
|
path = btrfs_alloc_path();
|
|
if (!path) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (args->drop_cache)
|
|
btrfs_drop_extent_cache(inode, args->start, args->end - 1, 0);
|
|
|
|
if (args->start >= inode->disk_i_size && !args->replace_extent)
|
|
modify_tree = 0;
|
|
|
|
update_refs = (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID);
|
|
while (1) {
|
|
recow = 0;
|
|
ret = btrfs_lookup_file_extent(trans, root, path, ino,
|
|
search_start, modify_tree);
|
|
if (ret < 0)
|
|
break;
|
|
if (ret > 0 && path->slots[0] > 0 && search_start == args->start) {
|
|
leaf = path->nodes[0];
|
|
btrfs_item_key_to_cpu(leaf, &key, path->slots[0] - 1);
|
|
if (key.objectid == ino &&
|
|
key.type == BTRFS_EXTENT_DATA_KEY)
|
|
path->slots[0]--;
|
|
}
|
|
ret = 0;
|
|
leafs_visited++;
|
|
next_slot:
|
|
leaf = path->nodes[0];
|
|
if (path->slots[0] >= btrfs_header_nritems(leaf)) {
|
|
BUG_ON(del_nr > 0);
|
|
ret = btrfs_next_leaf(root, path);
|
|
if (ret < 0)
|
|
break;
|
|
if (ret > 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
leafs_visited++;
|
|
leaf = path->nodes[0];
|
|
recow = 1;
|
|
}
|
|
|
|
btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
|
|
|
|
if (key.objectid > ino)
|
|
break;
|
|
if (WARN_ON_ONCE(key.objectid < ino) ||
|
|
key.type < BTRFS_EXTENT_DATA_KEY) {
|
|
ASSERT(del_nr == 0);
|
|
path->slots[0]++;
|
|
goto next_slot;
|
|
}
|
|
if (key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= args->end)
|
|
break;
|
|
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
extent_type = btrfs_file_extent_type(leaf, fi);
|
|
|
|
if (extent_type == BTRFS_FILE_EXTENT_REG ||
|
|
extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
|
|
disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
|
|
num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
|
|
extent_offset = btrfs_file_extent_offset(leaf, fi);
|
|
extent_end = key.offset +
|
|
btrfs_file_extent_num_bytes(leaf, fi);
|
|
} else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
|
|
extent_end = key.offset +
|
|
btrfs_file_extent_ram_bytes(leaf, fi);
|
|
} else {
|
|
/* can't happen */
|
|
BUG();
|
|
}
|
|
|
|
/*
|
|
* Don't skip extent items representing 0 byte lengths. They
|
|
* used to be created (bug) if while punching holes we hit
|
|
* -ENOSPC condition. So if we find one here, just ensure we
|
|
* delete it, otherwise we would insert a new file extent item
|
|
* with the same key (offset) as that 0 bytes length file
|
|
* extent item in the call to setup_items_for_insert() later
|
|
* in this function.
|
|
*/
|
|
if (extent_end == key.offset && extent_end >= search_start) {
|
|
last_end = extent_end;
|
|
goto delete_extent_item;
|
|
}
|
|
|
|
if (extent_end <= search_start) {
|
|
path->slots[0]++;
|
|
goto next_slot;
|
|
}
|
|
|
|
found = 1;
|
|
search_start = max(key.offset, args->start);
|
|
if (recow || !modify_tree) {
|
|
modify_tree = -1;
|
|
btrfs_release_path(path);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* | - range to drop - |
|
|
* | -------- extent -------- |
|
|
*/
|
|
if (args->start > key.offset && args->end < extent_end) {
|
|
BUG_ON(del_nr > 0);
|
|
if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
memcpy(&new_key, &key, sizeof(new_key));
|
|
new_key.offset = args->start;
|
|
ret = btrfs_duplicate_item(trans, root, path,
|
|
&new_key);
|
|
if (ret == -EAGAIN) {
|
|
btrfs_release_path(path);
|
|
continue;
|
|
}
|
|
if (ret < 0)
|
|
break;
|
|
|
|
leaf = path->nodes[0];
|
|
fi = btrfs_item_ptr(leaf, path->slots[0] - 1,
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
args->start - key.offset);
|
|
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
|
|
extent_offset += args->start - key.offset;
|
|
btrfs_set_file_extent_offset(leaf, fi, extent_offset);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
extent_end - args->start);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
|
|
if (update_refs && disk_bytenr > 0) {
|
|
btrfs_init_generic_ref(&ref,
|
|
BTRFS_ADD_DELAYED_REF,
|
|
disk_bytenr, num_bytes, 0);
|
|
btrfs_init_data_ref(&ref,
|
|
root->root_key.objectid,
|
|
new_key.objectid,
|
|
args->start - extent_offset,
|
|
0, false);
|
|
ret = btrfs_inc_extent_ref(trans, &ref);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
}
|
|
key.offset = args->start;
|
|
}
|
|
/*
|
|
* From here on out we will have actually dropped something, so
|
|
* last_end can be updated.
|
|
*/
|
|
last_end = extent_end;
|
|
|
|
/*
|
|
* | ---- range to drop ----- |
|
|
* | -------- extent -------- |
|
|
*/
|
|
if (args->start <= key.offset && args->end < extent_end) {
|
|
if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
memcpy(&new_key, &key, sizeof(new_key));
|
|
new_key.offset = args->end;
|
|
btrfs_set_item_key_safe(fs_info, path, &new_key);
|
|
|
|
extent_offset += args->end - key.offset;
|
|
btrfs_set_file_extent_offset(leaf, fi, extent_offset);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
extent_end - args->end);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
if (update_refs && disk_bytenr > 0)
|
|
args->bytes_found += args->end - key.offset;
|
|
break;
|
|
}
|
|
|
|
search_start = extent_end;
|
|
/*
|
|
* | ---- range to drop ----- |
|
|
* | -------- extent -------- |
|
|
*/
|
|
if (args->start > key.offset && args->end >= extent_end) {
|
|
BUG_ON(del_nr > 0);
|
|
if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
args->start - key.offset);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
if (update_refs && disk_bytenr > 0)
|
|
args->bytes_found += extent_end - args->start;
|
|
if (args->end == extent_end)
|
|
break;
|
|
|
|
path->slots[0]++;
|
|
goto next_slot;
|
|
}
|
|
|
|
/*
|
|
* | ---- range to drop ----- |
|
|
* | ------ extent ------ |
|
|
*/
|
|
if (args->start <= key.offset && args->end >= extent_end) {
|
|
delete_extent_item:
|
|
if (del_nr == 0) {
|
|
del_slot = path->slots[0];
|
|
del_nr = 1;
|
|
} else {
|
|
BUG_ON(del_slot + del_nr != path->slots[0]);
|
|
del_nr++;
|
|
}
|
|
|
|
if (update_refs &&
|
|
extent_type == BTRFS_FILE_EXTENT_INLINE) {
|
|
args->bytes_found += extent_end - key.offset;
|
|
extent_end = ALIGN(extent_end,
|
|
fs_info->sectorsize);
|
|
} else if (update_refs && disk_bytenr > 0) {
|
|
btrfs_init_generic_ref(&ref,
|
|
BTRFS_DROP_DELAYED_REF,
|
|
disk_bytenr, num_bytes, 0);
|
|
btrfs_init_data_ref(&ref,
|
|
root->root_key.objectid,
|
|
key.objectid,
|
|
key.offset - extent_offset, 0,
|
|
false);
|
|
ret = btrfs_free_extent(trans, &ref);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
args->bytes_found += extent_end - key.offset;
|
|
}
|
|
|
|
if (args->end == extent_end)
|
|
break;
|
|
|
|
if (path->slots[0] + 1 < btrfs_header_nritems(leaf)) {
|
|
path->slots[0]++;
|
|
goto next_slot;
|
|
}
|
|
|
|
ret = btrfs_del_items(trans, root, path, del_slot,
|
|
del_nr);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
|
|
del_nr = 0;
|
|
del_slot = 0;
|
|
|
|
btrfs_release_path(path);
|
|
continue;
|
|
}
|
|
|
|
BUG();
|
|
}
|
|
|
|
if (!ret && del_nr > 0) {
|
|
/*
|
|
* Set path->slots[0] to first slot, so that after the delete
|
|
* if items are move off from our leaf to its immediate left or
|
|
* right neighbor leafs, we end up with a correct and adjusted
|
|
* path->slots[0] for our insertion (if args->replace_extent).
|
|
*/
|
|
path->slots[0] = del_slot;
|
|
ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
|
|
if (ret)
|
|
btrfs_abort_transaction(trans, ret);
|
|
}
|
|
|
|
leaf = path->nodes[0];
|
|
/*
|
|
* If btrfs_del_items() was called, it might have deleted a leaf, in
|
|
* which case it unlocked our path, so check path->locks[0] matches a
|
|
* write lock.
|
|
*/
|
|
if (!ret && args->replace_extent && leafs_visited == 1 &&
|
|
path->locks[0] == BTRFS_WRITE_LOCK &&
|
|
btrfs_leaf_free_space(leaf) >=
|
|
sizeof(struct btrfs_item) + args->extent_item_size) {
|
|
|
|
key.objectid = ino;
|
|
key.type = BTRFS_EXTENT_DATA_KEY;
|
|
key.offset = args->start;
|
|
if (!del_nr && path->slots[0] < btrfs_header_nritems(leaf)) {
|
|
struct btrfs_key slot_key;
|
|
|
|
btrfs_item_key_to_cpu(leaf, &slot_key, path->slots[0]);
|
|
if (btrfs_comp_cpu_keys(&key, &slot_key) > 0)
|
|
path->slots[0]++;
|
|
}
|
|
setup_items_for_insert(root, path, &key,
|
|
&args->extent_item_size, 1);
|
|
args->extent_inserted = true;
|
|
}
|
|
|
|
if (!args->path)
|
|
btrfs_free_path(path);
|
|
else if (!args->extent_inserted)
|
|
btrfs_release_path(path);
|
|
out:
|
|
args->drop_end = found ? min(args->end, last_end) : args->end;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int extent_mergeable(struct extent_buffer *leaf, int slot,
|
|
u64 objectid, u64 bytenr, u64 orig_offset,
|
|
u64 *start, u64 *end)
|
|
{
|
|
struct btrfs_file_extent_item *fi;
|
|
struct btrfs_key key;
|
|
u64 extent_end;
|
|
|
|
if (slot < 0 || slot >= btrfs_header_nritems(leaf))
|
|
return 0;
|
|
|
|
btrfs_item_key_to_cpu(leaf, &key, slot);
|
|
if (key.objectid != objectid || key.type != BTRFS_EXTENT_DATA_KEY)
|
|
return 0;
|
|
|
|
fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
|
|
if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG ||
|
|
btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr ||
|
|
btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset ||
|
|
btrfs_file_extent_compression(leaf, fi) ||
|
|
btrfs_file_extent_encryption(leaf, fi) ||
|
|
btrfs_file_extent_other_encoding(leaf, fi))
|
|
return 0;
|
|
|
|
extent_end = key.offset + btrfs_file_extent_num_bytes(leaf, fi);
|
|
if ((*start && *start != key.offset) || (*end && *end != extent_end))
|
|
return 0;
|
|
|
|
*start = key.offset;
|
|
*end = extent_end;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Mark extent in the range start - end as written.
|
|
*
|
|
* This changes extent type from 'pre-allocated' to 'regular'. If only
|
|
* part of extent is marked as written, the extent will be split into
|
|
* two or three.
|
|
*/
|
|
int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
|
|
struct btrfs_inode *inode, u64 start, u64 end)
|
|
{
|
|
struct btrfs_fs_info *fs_info = trans->fs_info;
|
|
struct btrfs_root *root = inode->root;
|
|
struct extent_buffer *leaf;
|
|
struct btrfs_path *path;
|
|
struct btrfs_file_extent_item *fi;
|
|
struct btrfs_ref ref = { 0 };
|
|
struct btrfs_key key;
|
|
struct btrfs_key new_key;
|
|
u64 bytenr;
|
|
u64 num_bytes;
|
|
u64 extent_end;
|
|
u64 orig_offset;
|
|
u64 other_start;
|
|
u64 other_end;
|
|
u64 split;
|
|
int del_nr = 0;
|
|
int del_slot = 0;
|
|
int recow;
|
|
int ret = 0;
|
|
u64 ino = btrfs_ino(inode);
|
|
|
|
path = btrfs_alloc_path();
|
|
if (!path)
|
|
return -ENOMEM;
|
|
again:
|
|
recow = 0;
|
|
split = start;
|
|
key.objectid = ino;
|
|
key.type = BTRFS_EXTENT_DATA_KEY;
|
|
key.offset = split;
|
|
|
|
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (ret > 0 && path->slots[0] > 0)
|
|
path->slots[0]--;
|
|
|
|
leaf = path->nodes[0];
|
|
btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
|
|
if (key.objectid != ino ||
|
|
key.type != BTRFS_EXTENT_DATA_KEY) {
|
|
ret = -EINVAL;
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_PREALLOC) {
|
|
ret = -EINVAL;
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
extent_end = key.offset + btrfs_file_extent_num_bytes(leaf, fi);
|
|
if (key.offset > start || extent_end < end) {
|
|
ret = -EINVAL;
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
|
|
bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
|
|
num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
|
|
orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi);
|
|
memcpy(&new_key, &key, sizeof(new_key));
|
|
|
|
if (start == key.offset && end < extent_end) {
|
|
other_start = 0;
|
|
other_end = start;
|
|
if (extent_mergeable(leaf, path->slots[0] - 1,
|
|
ino, bytenr, orig_offset,
|
|
&other_start, &other_end)) {
|
|
new_key.offset = end;
|
|
btrfs_set_item_key_safe(fs_info, path, &new_key);
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_generation(leaf, fi,
|
|
trans->transid);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
extent_end - end);
|
|
btrfs_set_file_extent_offset(leaf, fi,
|
|
end - orig_offset);
|
|
fi = btrfs_item_ptr(leaf, path->slots[0] - 1,
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_generation(leaf, fi,
|
|
trans->transid);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
end - other_start);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (start > key.offset && end == extent_end) {
|
|
other_start = end;
|
|
other_end = 0;
|
|
if (extent_mergeable(leaf, path->slots[0] + 1,
|
|
ino, bytenr, orig_offset,
|
|
&other_start, &other_end)) {
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
start - key.offset);
|
|
btrfs_set_file_extent_generation(leaf, fi,
|
|
trans->transid);
|
|
path->slots[0]++;
|
|
new_key.offset = start;
|
|
btrfs_set_item_key_safe(fs_info, path, &new_key);
|
|
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_generation(leaf, fi,
|
|
trans->transid);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
other_end - start);
|
|
btrfs_set_file_extent_offset(leaf, fi,
|
|
start - orig_offset);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
while (start > key.offset || end < extent_end) {
|
|
if (key.offset == start)
|
|
split = end;
|
|
|
|
new_key.offset = split;
|
|
ret = btrfs_duplicate_item(trans, root, path, &new_key);
|
|
if (ret == -EAGAIN) {
|
|
btrfs_release_path(path);
|
|
goto again;
|
|
}
|
|
if (ret < 0) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
|
|
leaf = path->nodes[0];
|
|
fi = btrfs_item_ptr(leaf, path->slots[0] - 1,
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_generation(leaf, fi, trans->transid);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
split - key.offset);
|
|
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
|
|
btrfs_set_file_extent_generation(leaf, fi, trans->transid);
|
|
btrfs_set_file_extent_offset(leaf, fi, split - orig_offset);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
extent_end - split);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
|
|
btrfs_init_generic_ref(&ref, BTRFS_ADD_DELAYED_REF, bytenr,
|
|
num_bytes, 0);
|
|
btrfs_init_data_ref(&ref, root->root_key.objectid, ino,
|
|
orig_offset, 0, false);
|
|
ret = btrfs_inc_extent_ref(trans, &ref);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
|
|
if (split == start) {
|
|
key.offset = start;
|
|
} else {
|
|
if (start != key.offset) {
|
|
ret = -EINVAL;
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
path->slots[0]--;
|
|
extent_end = end;
|
|
}
|
|
recow = 1;
|
|
}
|
|
|
|
other_start = end;
|
|
other_end = 0;
|
|
btrfs_init_generic_ref(&ref, BTRFS_DROP_DELAYED_REF, bytenr,
|
|
num_bytes, 0);
|
|
btrfs_init_data_ref(&ref, root->root_key.objectid, ino, orig_offset,
|
|
0, false);
|
|
if (extent_mergeable(leaf, path->slots[0] + 1,
|
|
ino, bytenr, orig_offset,
|
|
&other_start, &other_end)) {
|
|
if (recow) {
|
|
btrfs_release_path(path);
|
|
goto again;
|
|
}
|
|
extent_end = other_end;
|
|
del_slot = path->slots[0] + 1;
|
|
del_nr++;
|
|
ret = btrfs_free_extent(trans, &ref);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
other_start = 0;
|
|
other_end = start;
|
|
if (extent_mergeable(leaf, path->slots[0] - 1,
|
|
ino, bytenr, orig_offset,
|
|
&other_start, &other_end)) {
|
|
if (recow) {
|
|
btrfs_release_path(path);
|
|
goto again;
|
|
}
|
|
key.offset = other_start;
|
|
del_slot = path->slots[0];
|
|
del_nr++;
|
|
ret = btrfs_free_extent(trans, &ref);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
if (del_nr == 0) {
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_type(leaf, fi,
|
|
BTRFS_FILE_EXTENT_REG);
|
|
btrfs_set_file_extent_generation(leaf, fi, trans->transid);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
} else {
|
|
fi = btrfs_item_ptr(leaf, del_slot - 1,
|
|
struct btrfs_file_extent_item);
|
|
btrfs_set_file_extent_type(leaf, fi,
|
|
BTRFS_FILE_EXTENT_REG);
|
|
btrfs_set_file_extent_generation(leaf, fi, trans->transid);
|
|
btrfs_set_file_extent_num_bytes(leaf, fi,
|
|
extent_end - key.offset);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
|
|
ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
|
|
if (ret < 0) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
out:
|
|
btrfs_free_path(path);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* on error we return an unlocked page and the error value
|
|
* on success we return a locked page and 0
|
|
*/
|
|
static int prepare_uptodate_page(struct inode *inode,
|
|
struct page *page, u64 pos,
|
|
bool force_uptodate)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (((pos & (PAGE_SIZE - 1)) || force_uptodate) &&
|
|
!PageUptodate(page)) {
|
|
ret = btrfs_readpage(NULL, page);
|
|
if (ret)
|
|
return ret;
|
|
lock_page(page);
|
|
if (!PageUptodate(page)) {
|
|
unlock_page(page);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Since btrfs_readpage() will unlock the page before it
|
|
* returns, there is a window where btrfs_releasepage() can be
|
|
* called to release the page. Here we check both inode
|
|
* mapping and PagePrivate() to make sure the page was not
|
|
* released.
|
|
*
|
|
* The private flag check is essential for subpage as we need
|
|
* to store extra bitmap using page->private.
|
|
*/
|
|
if (page->mapping != inode->i_mapping || !PagePrivate(page)) {
|
|
unlock_page(page);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* this just gets pages into the page cache and locks them down.
|
|
*/
|
|
static noinline int prepare_pages(struct inode *inode, struct page **pages,
|
|
size_t num_pages, loff_t pos,
|
|
size_t write_bytes, bool force_uptodate)
|
|
{
|
|
int i;
|
|
unsigned long index = pos >> PAGE_SHIFT;
|
|
gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
|
|
int err = 0;
|
|
int faili;
|
|
|
|
for (i = 0; i < num_pages; i++) {
|
|
again:
|
|
pages[i] = find_or_create_page(inode->i_mapping, index + i,
|
|
mask | __GFP_WRITE);
|
|
if (!pages[i]) {
|
|
faili = i - 1;
|
|
err = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
err = set_page_extent_mapped(pages[i]);
|
|
if (err < 0) {
|
|
faili = i;
|
|
goto fail;
|
|
}
|
|
|
|
if (i == 0)
|
|
err = prepare_uptodate_page(inode, pages[i], pos,
|
|
force_uptodate);
|
|
if (!err && i == num_pages - 1)
|
|
err = prepare_uptodate_page(inode, pages[i],
|
|
pos + write_bytes, false);
|
|
if (err) {
|
|
put_page(pages[i]);
|
|
if (err == -EAGAIN) {
|
|
err = 0;
|
|
goto again;
|
|
}
|
|
faili = i - 1;
|
|
goto fail;
|
|
}
|
|
wait_on_page_writeback(pages[i]);
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
while (faili >= 0) {
|
|
unlock_page(pages[faili]);
|
|
put_page(pages[faili]);
|
|
faili--;
|
|
}
|
|
return err;
|
|
|
|
}
|
|
|
|
/*
|
|
* This function locks the extent and properly waits for data=ordered extents
|
|
* to finish before allowing the pages to be modified if need.
|
|
*
|
|
* The return value:
|
|
* 1 - the extent is locked
|
|
* 0 - the extent is not locked, and everything is OK
|
|
* -EAGAIN - need re-prepare the pages
|
|
* the other < 0 number - Something wrong happens
|
|
*/
|
|
static noinline int
|
|
lock_and_cleanup_extent_if_need(struct btrfs_inode *inode, struct page **pages,
|
|
size_t num_pages, loff_t pos,
|
|
size_t write_bytes,
|
|
u64 *lockstart, u64 *lockend,
|
|
struct extent_state **cached_state)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
u64 start_pos;
|
|
u64 last_pos;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
start_pos = round_down(pos, fs_info->sectorsize);
|
|
last_pos = round_up(pos + write_bytes, fs_info->sectorsize) - 1;
|
|
|
|
if (start_pos < inode->vfs_inode.i_size) {
|
|
struct btrfs_ordered_extent *ordered;
|
|
|
|
lock_extent_bits(&inode->io_tree, start_pos, last_pos,
|
|
cached_state);
|
|
ordered = btrfs_lookup_ordered_range(inode, start_pos,
|
|
last_pos - start_pos + 1);
|
|
if (ordered &&
|
|
ordered->file_offset + ordered->num_bytes > start_pos &&
|
|
ordered->file_offset <= last_pos) {
|
|
unlock_extent_cached(&inode->io_tree, start_pos,
|
|
last_pos, cached_state);
|
|
for (i = 0; i < num_pages; i++) {
|
|
unlock_page(pages[i]);
|
|
put_page(pages[i]);
|
|
}
|
|
btrfs_start_ordered_extent(ordered, 1);
|
|
btrfs_put_ordered_extent(ordered);
|
|
return -EAGAIN;
|
|
}
|
|
if (ordered)
|
|
btrfs_put_ordered_extent(ordered);
|
|
|
|
*lockstart = start_pos;
|
|
*lockend = last_pos;
|
|
ret = 1;
|
|
}
|
|
|
|
/*
|
|
* We should be called after prepare_pages() which should have locked
|
|
* all pages in the range.
|
|
*/
|
|
for (i = 0; i < num_pages; i++)
|
|
WARN_ON(!PageLocked(pages[i]));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int check_can_nocow(struct btrfs_inode *inode, loff_t pos,
|
|
size_t *write_bytes, bool nowait)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
struct btrfs_root *root = inode->root;
|
|
u64 lockstart, lockend;
|
|
u64 num_bytes;
|
|
int ret;
|
|
|
|
if (!(inode->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC)))
|
|
return 0;
|
|
|
|
if (!nowait && !btrfs_drew_try_write_lock(&root->snapshot_lock))
|
|
return -EAGAIN;
|
|
|
|
lockstart = round_down(pos, fs_info->sectorsize);
|
|
lockend = round_up(pos + *write_bytes,
|
|
fs_info->sectorsize) - 1;
|
|
num_bytes = lockend - lockstart + 1;
|
|
|
|
if (nowait) {
|
|
struct btrfs_ordered_extent *ordered;
|
|
|
|
if (!try_lock_extent(&inode->io_tree, lockstart, lockend))
|
|
return -EAGAIN;
|
|
|
|
ordered = btrfs_lookup_ordered_range(inode, lockstart,
|
|
num_bytes);
|
|
if (ordered) {
|
|
btrfs_put_ordered_extent(ordered);
|
|
ret = -EAGAIN;
|
|
goto out_unlock;
|
|
}
|
|
} else {
|
|
btrfs_lock_and_flush_ordered_range(inode, lockstart,
|
|
lockend, NULL);
|
|
}
|
|
|
|
ret = can_nocow_extent(&inode->vfs_inode, lockstart, &num_bytes,
|
|
NULL, NULL, NULL, false);
|
|
if (ret <= 0) {
|
|
ret = 0;
|
|
if (!nowait)
|
|
btrfs_drew_write_unlock(&root->snapshot_lock);
|
|
} else {
|
|
*write_bytes = min_t(size_t, *write_bytes ,
|
|
num_bytes - pos + lockstart);
|
|
}
|
|
out_unlock:
|
|
unlock_extent(&inode->io_tree, lockstart, lockend);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int check_nocow_nolock(struct btrfs_inode *inode, loff_t pos,
|
|
size_t *write_bytes)
|
|
{
|
|
return check_can_nocow(inode, pos, write_bytes, true);
|
|
}
|
|
|
|
/*
|
|
* Check if we can do nocow write into the range [@pos, @pos + @write_bytes)
|
|
*
|
|
* @pos: File offset
|
|
* @write_bytes: The length to write, will be updated to the nocow writeable
|
|
* range
|
|
*
|
|
* This function will flush ordered extents in the range to ensure proper
|
|
* nocow checks.
|
|
*
|
|
* Return:
|
|
* >0 and update @write_bytes if we can do nocow write
|
|
* 0 if we can't do nocow write
|
|
* -EAGAIN if we can't get the needed lock or there are ordered extents
|
|
* for * (nowait == true) case
|
|
* <0 if other error happened
|
|
*
|
|
* NOTE: Callers need to release the lock by btrfs_check_nocow_unlock().
|
|
*/
|
|
int btrfs_check_nocow_lock(struct btrfs_inode *inode, loff_t pos,
|
|
size_t *write_bytes)
|
|
{
|
|
return check_can_nocow(inode, pos, write_bytes, false);
|
|
}
|
|
|
|
void btrfs_check_nocow_unlock(struct btrfs_inode *inode)
|
|
{
|
|
btrfs_drew_write_unlock(&inode->root->snapshot_lock);
|
|
}
|
|
|
|
static void update_time_for_write(struct inode *inode)
|
|
{
|
|
struct timespec64 now;
|
|
|
|
if (IS_NOCMTIME(inode))
|
|
return;
|
|
|
|
now = current_time(inode);
|
|
if (!timespec64_equal(&inode->i_mtime, &now))
|
|
inode->i_mtime = now;
|
|
|
|
if (!timespec64_equal(&inode->i_ctime, &now))
|
|
inode->i_ctime = now;
|
|
|
|
if (IS_I_VERSION(inode))
|
|
inode_inc_iversion(inode);
|
|
}
|
|
|
|
static int btrfs_write_check(struct kiocb *iocb, struct iov_iter *from,
|
|
size_t count)
|
|
{
|
|
struct file *file = iocb->ki_filp;
|
|
struct inode *inode = file_inode(file);
|
|
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
|
|
loff_t pos = iocb->ki_pos;
|
|
int ret;
|
|
loff_t oldsize;
|
|
loff_t start_pos;
|
|
|
|
if (iocb->ki_flags & IOCB_NOWAIT) {
|
|
size_t nocow_bytes = count;
|
|
|
|
/* We will allocate space in case nodatacow is not set, so bail */
|
|
if (check_nocow_nolock(BTRFS_I(inode), pos, &nocow_bytes) <= 0)
|
|
return -EAGAIN;
|
|
/*
|
|
* There are holes in the range or parts of the range that must
|
|
* be COWed (shared extents, RO block groups, etc), so just bail
|
|
* out.
|
|
*/
|
|
if (nocow_bytes < count)
|
|
return -EAGAIN;
|
|
}
|
|
|
|
current->backing_dev_info = inode_to_bdi(inode);
|
|
ret = file_remove_privs(file);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* We reserve space for updating the inode when we reserve space for the
|
|
* extent we are going to write, so we will enospc out there. We don't
|
|
* need to start yet another transaction to update the inode as we will
|
|
* update the inode when we finish writing whatever data we write.
|
|
*/
|
|
update_time_for_write(inode);
|
|
|
|
start_pos = round_down(pos, fs_info->sectorsize);
|
|
oldsize = i_size_read(inode);
|
|
if (start_pos > oldsize) {
|
|
/* Expand hole size to cover write data, preventing empty gap */
|
|
loff_t end_pos = round_up(pos + count, fs_info->sectorsize);
|
|
|
|
ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos);
|
|
if (ret) {
|
|
current->backing_dev_info = NULL;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static noinline ssize_t btrfs_buffered_write(struct kiocb *iocb,
|
|
struct iov_iter *i)
|
|
{
|
|
struct file *file = iocb->ki_filp;
|
|
loff_t pos;
|
|
struct inode *inode = file_inode(file);
|
|
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
|
|
struct page **pages = NULL;
|
|
struct extent_changeset *data_reserved = NULL;
|
|
u64 release_bytes = 0;
|
|
u64 lockstart;
|
|
u64 lockend;
|
|
size_t num_written = 0;
|
|
int nrptrs;
|
|
ssize_t ret;
|
|
bool only_release_metadata = false;
|
|
bool force_page_uptodate = false;
|
|
loff_t old_isize = i_size_read(inode);
|
|
unsigned int ilock_flags = 0;
|
|
|
|
if (iocb->ki_flags & IOCB_NOWAIT)
|
|
ilock_flags |= BTRFS_ILOCK_TRY;
|
|
|
|
ret = btrfs_inode_lock(inode, ilock_flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = generic_write_checks(iocb, i);
|
|
if (ret <= 0)
|
|
goto out;
|
|
|
|
ret = btrfs_write_check(iocb, i, ret);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
pos = iocb->ki_pos;
|
|
nrptrs = min(DIV_ROUND_UP(iov_iter_count(i), PAGE_SIZE),
|
|
PAGE_SIZE / (sizeof(struct page *)));
|
|
nrptrs = min(nrptrs, current->nr_dirtied_pause - current->nr_dirtied);
|
|
nrptrs = max(nrptrs, 8);
|
|
pages = kmalloc_array(nrptrs, sizeof(struct page *), GFP_KERNEL);
|
|
if (!pages) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
while (iov_iter_count(i) > 0) {
|
|
struct extent_state *cached_state = NULL;
|
|
size_t offset = offset_in_page(pos);
|
|
size_t sector_offset;
|
|
size_t write_bytes = min(iov_iter_count(i),
|
|
nrptrs * (size_t)PAGE_SIZE -
|
|
offset);
|
|
size_t num_pages;
|
|
size_t reserve_bytes;
|
|
size_t dirty_pages;
|
|
size_t copied;
|
|
size_t dirty_sectors;
|
|
size_t num_sectors;
|
|
int extents_locked;
|
|
|
|
/*
|
|
* Fault pages before locking them in prepare_pages
|
|
* to avoid recursive lock
|
|
*/
|
|
if (unlikely(fault_in_iov_iter_readable(i, write_bytes))) {
|
|
ret = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
only_release_metadata = false;
|
|
sector_offset = pos & (fs_info->sectorsize - 1);
|
|
|
|
extent_changeset_release(data_reserved);
|
|
ret = btrfs_check_data_free_space(BTRFS_I(inode),
|
|
&data_reserved, pos,
|
|
write_bytes);
|
|
if (ret < 0) {
|
|
/*
|
|
* If we don't have to COW at the offset, reserve
|
|
* metadata only. write_bytes may get smaller than
|
|
* requested here.
|
|
*/
|
|
if (btrfs_check_nocow_lock(BTRFS_I(inode), pos,
|
|
&write_bytes) > 0)
|
|
only_release_metadata = true;
|
|
else
|
|
break;
|
|
}
|
|
|
|
num_pages = DIV_ROUND_UP(write_bytes + offset, PAGE_SIZE);
|
|
WARN_ON(num_pages > nrptrs);
|
|
reserve_bytes = round_up(write_bytes + sector_offset,
|
|
fs_info->sectorsize);
|
|
WARN_ON(reserve_bytes == 0);
|
|
ret = btrfs_delalloc_reserve_metadata(BTRFS_I(inode),
|
|
reserve_bytes);
|
|
if (ret) {
|
|
if (!only_release_metadata)
|
|
btrfs_free_reserved_data_space(BTRFS_I(inode),
|
|
data_reserved, pos,
|
|
write_bytes);
|
|
else
|
|
btrfs_check_nocow_unlock(BTRFS_I(inode));
|
|
break;
|
|
}
|
|
|
|
release_bytes = reserve_bytes;
|
|
again:
|
|
/*
|
|
* This is going to setup the pages array with the number of
|
|
* pages we want, so we don't really need to worry about the
|
|
* contents of pages from loop to loop
|
|
*/
|
|
ret = prepare_pages(inode, pages, num_pages,
|
|
pos, write_bytes,
|
|
force_page_uptodate);
|
|
if (ret) {
|
|
btrfs_delalloc_release_extents(BTRFS_I(inode),
|
|
reserve_bytes);
|
|
break;
|
|
}
|
|
|
|
extents_locked = lock_and_cleanup_extent_if_need(
|
|
BTRFS_I(inode), pages,
|
|
num_pages, pos, write_bytes, &lockstart,
|
|
&lockend, &cached_state);
|
|
if (extents_locked < 0) {
|
|
if (extents_locked == -EAGAIN)
|
|
goto again;
|
|
btrfs_delalloc_release_extents(BTRFS_I(inode),
|
|
reserve_bytes);
|
|
ret = extents_locked;
|
|
break;
|
|
}
|
|
|
|
copied = btrfs_copy_from_user(pos, write_bytes, pages, i);
|
|
|
|
num_sectors = BTRFS_BYTES_TO_BLKS(fs_info, reserve_bytes);
|
|
dirty_sectors = round_up(copied + sector_offset,
|
|
fs_info->sectorsize);
|
|
dirty_sectors = BTRFS_BYTES_TO_BLKS(fs_info, dirty_sectors);
|
|
|
|
/*
|
|
* if we have trouble faulting in the pages, fall
|
|
* back to one page at a time
|
|
*/
|
|
if (copied < write_bytes)
|
|
nrptrs = 1;
|
|
|
|
if (copied == 0) {
|
|
force_page_uptodate = true;
|
|
dirty_sectors = 0;
|
|
dirty_pages = 0;
|
|
} else {
|
|
force_page_uptodate = false;
|
|
dirty_pages = DIV_ROUND_UP(copied + offset,
|
|
PAGE_SIZE);
|
|
}
|
|
|
|
if (num_sectors > dirty_sectors) {
|
|
/* release everything except the sectors we dirtied */
|
|
release_bytes -= dirty_sectors << fs_info->sectorsize_bits;
|
|
if (only_release_metadata) {
|
|
btrfs_delalloc_release_metadata(BTRFS_I(inode),
|
|
release_bytes, true);
|
|
} else {
|
|
u64 __pos;
|
|
|
|
__pos = round_down(pos,
|
|
fs_info->sectorsize) +
|
|
(dirty_pages << PAGE_SHIFT);
|
|
btrfs_delalloc_release_space(BTRFS_I(inode),
|
|
data_reserved, __pos,
|
|
release_bytes, true);
|
|
}
|
|
}
|
|
|
|
release_bytes = round_up(copied + sector_offset,
|
|
fs_info->sectorsize);
|
|
|
|
ret = btrfs_dirty_pages(BTRFS_I(inode), pages,
|
|
dirty_pages, pos, copied,
|
|
&cached_state, only_release_metadata);
|
|
|
|
/*
|
|
* If we have not locked the extent range, because the range's
|
|
* start offset is >= i_size, we might still have a non-NULL
|
|
* cached extent state, acquired while marking the extent range
|
|
* as delalloc through btrfs_dirty_pages(). Therefore free any
|
|
* possible cached extent state to avoid a memory leak.
|
|
*/
|
|
if (extents_locked)
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree,
|
|
lockstart, lockend, &cached_state);
|
|
else
|
|
free_extent_state(cached_state);
|
|
|
|
btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes);
|
|
if (ret) {
|
|
btrfs_drop_pages(pages, num_pages);
|
|
break;
|
|
}
|
|
|
|
release_bytes = 0;
|
|
if (only_release_metadata)
|
|
btrfs_check_nocow_unlock(BTRFS_I(inode));
|
|
|
|
btrfs_drop_pages(pages, num_pages);
|
|
|
|
cond_resched();
|
|
|
|
balance_dirty_pages_ratelimited(inode->i_mapping);
|
|
|
|
pos += copied;
|
|
num_written += copied;
|
|
}
|
|
|
|
kfree(pages);
|
|
|
|
if (release_bytes) {
|
|
if (only_release_metadata) {
|
|
btrfs_check_nocow_unlock(BTRFS_I(inode));
|
|
btrfs_delalloc_release_metadata(BTRFS_I(inode),
|
|
release_bytes, true);
|
|
} else {
|
|
btrfs_delalloc_release_space(BTRFS_I(inode),
|
|
data_reserved,
|
|
round_down(pos, fs_info->sectorsize),
|
|
release_bytes, true);
|
|
}
|
|
}
|
|
|
|
extent_changeset_free(data_reserved);
|
|
if (num_written > 0) {
|
|
pagecache_isize_extended(inode, old_isize, iocb->ki_pos);
|
|
iocb->ki_pos += num_written;
|
|
}
|
|
out:
|
|
btrfs_inode_unlock(inode, ilock_flags);
|
|
return num_written ? num_written : ret;
|
|
}
|
|
|
|
static ssize_t check_direct_IO(struct btrfs_fs_info *fs_info,
|
|
const struct iov_iter *iter, loff_t offset)
|
|
{
|
|
const u32 blocksize_mask = fs_info->sectorsize - 1;
|
|
|
|
if (offset & blocksize_mask)
|
|
return -EINVAL;
|
|
|
|
if (iov_iter_alignment(iter) & blocksize_mask)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
|
|
{
|
|
struct file *file = iocb->ki_filp;
|
|
struct inode *inode = file_inode(file);
|
|
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
|
|
loff_t pos;
|
|
ssize_t written = 0;
|
|
ssize_t written_buffered;
|
|
size_t prev_left = 0;
|
|
loff_t endbyte;
|
|
ssize_t err;
|
|
unsigned int ilock_flags = 0;
|
|
struct iomap_dio *dio;
|
|
|
|
if (iocb->ki_flags & IOCB_NOWAIT)
|
|
ilock_flags |= BTRFS_ILOCK_TRY;
|
|
|
|
/* If the write DIO is within EOF, use a shared lock */
|
|
if (iocb->ki_pos + iov_iter_count(from) <= i_size_read(inode))
|
|
ilock_flags |= BTRFS_ILOCK_SHARED;
|
|
|
|
relock:
|
|
err = btrfs_inode_lock(inode, ilock_flags);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = generic_write_checks(iocb, from);
|
|
if (err <= 0) {
|
|
btrfs_inode_unlock(inode, ilock_flags);
|
|
return err;
|
|
}
|
|
|
|
err = btrfs_write_check(iocb, from, err);
|
|
if (err < 0) {
|
|
btrfs_inode_unlock(inode, ilock_flags);
|
|
goto out;
|
|
}
|
|
|
|
pos = iocb->ki_pos;
|
|
/*
|
|
* Re-check since file size may have changed just before taking the
|
|
* lock or pos may have changed because of O_APPEND in generic_write_check()
|
|
*/
|
|
if ((ilock_flags & BTRFS_ILOCK_SHARED) &&
|
|
pos + iov_iter_count(from) > i_size_read(inode)) {
|
|
btrfs_inode_unlock(inode, ilock_flags);
|
|
ilock_flags &= ~BTRFS_ILOCK_SHARED;
|
|
goto relock;
|
|
}
|
|
|
|
if (check_direct_IO(fs_info, from, pos)) {
|
|
btrfs_inode_unlock(inode, ilock_flags);
|
|
goto buffered;
|
|
}
|
|
|
|
/*
|
|
* The iov_iter can be mapped to the same file range we are writing to.
|
|
* If that's the case, then we will deadlock in the iomap code, because
|
|
* it first calls our callback btrfs_dio_iomap_begin(), which will create
|
|
* an ordered extent, and after that it will fault in the pages that the
|
|
* iov_iter refers to. During the fault in we end up in the readahead
|
|
* pages code (starting at btrfs_readahead()), which will lock the range,
|
|
* find that ordered extent and then wait for it to complete (at
|
|
* btrfs_lock_and_flush_ordered_range()), resulting in a deadlock since
|
|
* obviously the ordered extent can never complete as we didn't submit
|
|
* yet the respective bio(s). This always happens when the buffer is
|
|
* memory mapped to the same file range, since the iomap DIO code always
|
|
* invalidates pages in the target file range (after starting and waiting
|
|
* for any writeback).
|
|
*
|
|
* So here we disable page faults in the iov_iter and then retry if we
|
|
* got -EFAULT, faulting in the pages before the retry.
|
|
*/
|
|
from->nofault = true;
|
|
dio = __iomap_dio_rw(iocb, from, &btrfs_dio_iomap_ops, &btrfs_dio_ops,
|
|
IOMAP_DIO_PARTIAL, written);
|
|
from->nofault = false;
|
|
|
|
/*
|
|
* iomap_dio_complete() will call btrfs_sync_file() if we have a dsync
|
|
* iocb, and that needs to lock the inode. So unlock it before calling
|
|
* iomap_dio_complete() to avoid a deadlock.
|
|
*/
|
|
btrfs_inode_unlock(inode, ilock_flags);
|
|
|
|
if (IS_ERR_OR_NULL(dio))
|
|
err = PTR_ERR_OR_ZERO(dio);
|
|
else
|
|
err = iomap_dio_complete(dio);
|
|
|
|
/* No increment (+=) because iomap returns a cumulative value. */
|
|
if (err > 0)
|
|
written = err;
|
|
|
|
if (iov_iter_count(from) > 0 && (err == -EFAULT || err > 0)) {
|
|
const size_t left = iov_iter_count(from);
|
|
/*
|
|
* We have more data left to write. Try to fault in as many as
|
|
* possible of the remainder pages and retry. We do this without
|
|
* releasing and locking again the inode, to prevent races with
|
|
* truncate.
|
|
*
|
|
* Also, in case the iov refers to pages in the file range of the
|
|
* file we want to write to (due to a mmap), we could enter an
|
|
* infinite loop if we retry after faulting the pages in, since
|
|
* iomap will invalidate any pages in the range early on, before
|
|
* it tries to fault in the pages of the iov. So we keep track of
|
|
* how much was left of iov in the previous EFAULT and fallback
|
|
* to buffered IO in case we haven't made any progress.
|
|
*/
|
|
if (left == prev_left) {
|
|
err = -ENOTBLK;
|
|
} else {
|
|
fault_in_iov_iter_readable(from, left);
|
|
prev_left = left;
|
|
goto relock;
|
|
}
|
|
}
|
|
|
|
/* If 'err' is -ENOTBLK then it means we must fallback to buffered IO. */
|
|
if ((err < 0 && err != -ENOTBLK) || !iov_iter_count(from))
|
|
goto out;
|
|
|
|
buffered:
|
|
pos = iocb->ki_pos;
|
|
written_buffered = btrfs_buffered_write(iocb, from);
|
|
if (written_buffered < 0) {
|
|
err = written_buffered;
|
|
goto out;
|
|
}
|
|
/*
|
|
* Ensure all data is persisted. We want the next direct IO read to be
|
|
* able to read what was just written.
|
|
*/
|
|
endbyte = pos + written_buffered - 1;
|
|
err = btrfs_fdatawrite_range(inode, pos, endbyte);
|
|
if (err)
|
|
goto out;
|
|
err = filemap_fdatawait_range(inode->i_mapping, pos, endbyte);
|
|
if (err)
|
|
goto out;
|
|
written += written_buffered;
|
|
iocb->ki_pos = pos + written_buffered;
|
|
invalidate_mapping_pages(file->f_mapping, pos >> PAGE_SHIFT,
|
|
endbyte >> PAGE_SHIFT);
|
|
out:
|
|
return err < 0 ? err : written;
|
|
}
|
|
|
|
static ssize_t btrfs_file_write_iter(struct kiocb *iocb,
|
|
struct iov_iter *from)
|
|
{
|
|
struct file *file = iocb->ki_filp;
|
|
struct btrfs_inode *inode = BTRFS_I(file_inode(file));
|
|
ssize_t num_written = 0;
|
|
const bool sync = iocb->ki_flags & IOCB_DSYNC;
|
|
|
|
/*
|
|
* If the fs flips readonly due to some impossible error, although we
|
|
* have opened a file as writable, we have to stop this write operation
|
|
* to ensure consistency.
|
|
*/
|
|
if (test_bit(BTRFS_FS_STATE_ERROR, &inode->root->fs_info->fs_state))
|
|
return -EROFS;
|
|
|
|
if (!(iocb->ki_flags & IOCB_DIRECT) &&
|
|
(iocb->ki_flags & IOCB_NOWAIT))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (sync)
|
|
atomic_inc(&inode->sync_writers);
|
|
|
|
if (iocb->ki_flags & IOCB_DIRECT)
|
|
num_written = btrfs_direct_write(iocb, from);
|
|
else
|
|
num_written = btrfs_buffered_write(iocb, from);
|
|
|
|
btrfs_set_inode_last_sub_trans(inode);
|
|
|
|
if (num_written > 0)
|
|
num_written = generic_write_sync(iocb, num_written);
|
|
|
|
if (sync)
|
|
atomic_dec(&inode->sync_writers);
|
|
|
|
current->backing_dev_info = NULL;
|
|
return num_written;
|
|
}
|
|
|
|
int btrfs_release_file(struct inode *inode, struct file *filp)
|
|
{
|
|
struct btrfs_file_private *private = filp->private_data;
|
|
|
|
if (private && private->filldir_buf)
|
|
kfree(private->filldir_buf);
|
|
kfree(private);
|
|
filp->private_data = NULL;
|
|
|
|
/*
|
|
* Set by setattr when we are about to truncate a file from a non-zero
|
|
* size to a zero size. This tries to flush down new bytes that may
|
|
* have been written if the application were using truncate to replace
|
|
* a file in place.
|
|
*/
|
|
if (test_and_clear_bit(BTRFS_INODE_FLUSH_ON_CLOSE,
|
|
&BTRFS_I(inode)->runtime_flags))
|
|
filemap_flush(inode->i_mapping);
|
|
return 0;
|
|
}
|
|
|
|
static int start_ordered_ops(struct inode *inode, loff_t start, loff_t end)
|
|
{
|
|
int ret;
|
|
struct blk_plug plug;
|
|
|
|
/*
|
|
* This is only called in fsync, which would do synchronous writes, so
|
|
* a plug can merge adjacent IOs as much as possible. Esp. in case of
|
|
* multiple disks using raid profile, a large IO can be split to
|
|
* several segments of stripe length (currently 64K).
|
|
*/
|
|
blk_start_plug(&plug);
|
|
atomic_inc(&BTRFS_I(inode)->sync_writers);
|
|
ret = btrfs_fdatawrite_range(inode, start, end);
|
|
atomic_dec(&BTRFS_I(inode)->sync_writers);
|
|
blk_finish_plug(&plug);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline bool skip_inode_logging(const struct btrfs_log_ctx *ctx)
|
|
{
|
|
struct btrfs_inode *inode = BTRFS_I(ctx->inode);
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
|
|
if (btrfs_inode_in_log(inode, fs_info->generation) &&
|
|
list_empty(&ctx->ordered_extents))
|
|
return true;
|
|
|
|
/*
|
|
* If we are doing a fast fsync we can not bail out if the inode's
|
|
* last_trans is <= then the last committed transaction, because we only
|
|
* update the last_trans of the inode during ordered extent completion,
|
|
* and for a fast fsync we don't wait for that, we only wait for the
|
|
* writeback to complete.
|
|
*/
|
|
if (inode->last_trans <= fs_info->last_trans_committed &&
|
|
(test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags) ||
|
|
list_empty(&ctx->ordered_extents)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* fsync call for both files and directories. This logs the inode into
|
|
* the tree log instead of forcing full commits whenever possible.
|
|
*
|
|
* It needs to call filemap_fdatawait so that all ordered extent updates are
|
|
* in the metadata btree are up to date for copying to the log.
|
|
*
|
|
* It drops the inode mutex before doing the tree log commit. This is an
|
|
* important optimization for directories because holding the mutex prevents
|
|
* new operations on the dir while we write to disk.
|
|
*/
|
|
int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
|
|
{
|
|
struct dentry *dentry = file_dentry(file);
|
|
struct inode *inode = d_inode(dentry);
|
|
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
|
|
struct btrfs_root *root = BTRFS_I(inode)->root;
|
|
struct btrfs_trans_handle *trans;
|
|
struct btrfs_log_ctx ctx;
|
|
int ret = 0, err;
|
|
u64 len;
|
|
bool full_sync;
|
|
|
|
trace_btrfs_sync_file(file, datasync);
|
|
|
|
btrfs_init_log_ctx(&ctx, inode);
|
|
|
|
/*
|
|
* Always set the range to a full range, otherwise we can get into
|
|
* several problems, from missing file extent items to represent holes
|
|
* when not using the NO_HOLES feature, to log tree corruption due to
|
|
* races between hole detection during logging and completion of ordered
|
|
* extents outside the range, to missing checksums due to ordered extents
|
|
* for which we flushed only a subset of their pages.
|
|
*/
|
|
start = 0;
|
|
end = LLONG_MAX;
|
|
len = (u64)LLONG_MAX + 1;
|
|
|
|
/*
|
|
* We write the dirty pages in the range and wait until they complete
|
|
* out of the ->i_mutex. If so, we can flush the dirty pages by
|
|
* multi-task, and make the performance up. See
|
|
* btrfs_wait_ordered_range for an explanation of the ASYNC check.
|
|
*/
|
|
ret = start_ordered_ops(inode, start, end);
|
|
if (ret)
|
|
goto out;
|
|
|
|
btrfs_inode_lock(inode, BTRFS_ILOCK_MMAP);
|
|
|
|
atomic_inc(&root->log_batch);
|
|
|
|
/*
|
|
* Always check for the full sync flag while holding the inode's lock,
|
|
* to avoid races with other tasks. The flag must be either set all the
|
|
* time during logging or always off all the time while logging.
|
|
*/
|
|
full_sync = test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
|
|
&BTRFS_I(inode)->runtime_flags);
|
|
|
|
/*
|
|
* Before we acquired the inode's lock and the mmap lock, someone may
|
|
* have dirtied more pages in the target range. We need to make sure
|
|
* that writeback for any such pages does not start while we are logging
|
|
* the inode, because if it does, any of the following might happen when
|
|
* we are not doing a full inode sync:
|
|
*
|
|
* 1) We log an extent after its writeback finishes but before its
|
|
* checksums are added to the csum tree, leading to -EIO errors
|
|
* when attempting to read the extent after a log replay.
|
|
*
|
|
* 2) We can end up logging an extent before its writeback finishes.
|
|
* Therefore after the log replay we will have a file extent item
|
|
* pointing to an unwritten extent (and no data checksums as well).
|
|
*
|
|
* So trigger writeback for any eventual new dirty pages and then we
|
|
* wait for all ordered extents to complete below.
|
|
*/
|
|
ret = start_ordered_ops(inode, start, end);
|
|
if (ret) {
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* We have to do this here to avoid the priority inversion of waiting on
|
|
* IO of a lower priority task while holding a transaction open.
|
|
*
|
|
* For a full fsync we wait for the ordered extents to complete while
|
|
* for a fast fsync we wait just for writeback to complete, and then
|
|
* attach the ordered extents to the transaction so that a transaction
|
|
* commit waits for their completion, to avoid data loss if we fsync,
|
|
* the current transaction commits before the ordered extents complete
|
|
* and a power failure happens right after that.
|
|
*
|
|
* For zoned filesystem, if a write IO uses a ZONE_APPEND command, the
|
|
* logical address recorded in the ordered extent may change. We need
|
|
* to wait for the IO to stabilize the logical address.
|
|
*/
|
|
if (full_sync || btrfs_is_zoned(fs_info)) {
|
|
ret = btrfs_wait_ordered_range(inode, start, len);
|
|
} else {
|
|
/*
|
|
* Get our ordered extents as soon as possible to avoid doing
|
|
* checksum lookups in the csum tree, and use instead the
|
|
* checksums attached to the ordered extents.
|
|
*/
|
|
btrfs_get_ordered_extents_for_logging(BTRFS_I(inode),
|
|
&ctx.ordered_extents);
|
|
ret = filemap_fdatawait_range(inode->i_mapping, start, end);
|
|
}
|
|
|
|
if (ret)
|
|
goto out_release_extents;
|
|
|
|
atomic_inc(&root->log_batch);
|
|
|
|
smp_mb();
|
|
if (skip_inode_logging(&ctx)) {
|
|
/*
|
|
* We've had everything committed since the last time we were
|
|
* modified so clear this flag in case it was set for whatever
|
|
* reason, it's no longer relevant.
|
|
*/
|
|
clear_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
|
|
&BTRFS_I(inode)->runtime_flags);
|
|
/*
|
|
* An ordered extent might have started before and completed
|
|
* already with io errors, in which case the inode was not
|
|
* updated and we end up here. So check the inode's mapping
|
|
* for any errors that might have happened since we last
|
|
* checked called fsync.
|
|
*/
|
|
ret = filemap_check_wb_err(inode->i_mapping, file->f_wb_err);
|
|
goto out_release_extents;
|
|
}
|
|
|
|
/*
|
|
* We use start here because we will need to wait on the IO to complete
|
|
* in btrfs_sync_log, which could require joining a transaction (for
|
|
* example checking cross references in the nocow path). If we use join
|
|
* here we could get into a situation where we're waiting on IO to
|
|
* happen that is blocked on a transaction trying to commit. With start
|
|
* we inc the extwriter counter, so we wait for all extwriters to exit
|
|
* before we start blocking joiners. This comment is to keep somebody
|
|
* from thinking they are super smart and changing this to
|
|
* btrfs_join_transaction *cough*Josef*cough*.
|
|
*/
|
|
trans = btrfs_start_transaction(root, 0);
|
|
if (IS_ERR(trans)) {
|
|
ret = PTR_ERR(trans);
|
|
goto out_release_extents;
|
|
}
|
|
trans->in_fsync = true;
|
|
|
|
ret = btrfs_log_dentry_safe(trans, dentry, &ctx);
|
|
btrfs_release_log_ctx_extents(&ctx);
|
|
if (ret < 0) {
|
|
/* Fallthrough and commit/free transaction. */
|
|
ret = 1;
|
|
}
|
|
|
|
/* we've logged all the items and now have a consistent
|
|
* version of the file in the log. It is possible that
|
|
* someone will come in and modify the file, but that's
|
|
* fine because the log is consistent on disk, and we
|
|
* have references to all of the file's extents
|
|
*
|
|
* It is possible that someone will come in and log the
|
|
* file again, but that will end up using the synchronization
|
|
* inside btrfs_sync_log to keep things safe.
|
|
*/
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
|
|
if (ret == BTRFS_NO_LOG_SYNC) {
|
|
ret = btrfs_end_transaction(trans);
|
|
goto out;
|
|
}
|
|
|
|
/* We successfully logged the inode, attempt to sync the log. */
|
|
if (!ret) {
|
|
ret = btrfs_sync_log(trans, root, &ctx);
|
|
if (!ret) {
|
|
ret = btrfs_end_transaction(trans);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* At this point we need to commit the transaction because we had
|
|
* btrfs_need_log_full_commit() or some other error.
|
|
*
|
|
* If we didn't do a full sync we have to stop the trans handle, wait on
|
|
* the ordered extents, start it again and commit the transaction. If
|
|
* we attempt to wait on the ordered extents here we could deadlock with
|
|
* something like fallocate() that is holding the extent lock trying to
|
|
* start a transaction while some other thread is trying to commit the
|
|
* transaction while we (fsync) are currently holding the transaction
|
|
* open.
|
|
*/
|
|
if (!full_sync) {
|
|
ret = btrfs_end_transaction(trans);
|
|
if (ret)
|
|
goto out;
|
|
ret = btrfs_wait_ordered_range(inode, start, len);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/*
|
|
* This is safe to use here because we're only interested in
|
|
* making sure the transaction that had the ordered extents is
|
|
* committed. We aren't waiting on anything past this point,
|
|
* we're purely getting the transaction and committing it.
|
|
*/
|
|
trans = btrfs_attach_transaction_barrier(root);
|
|
if (IS_ERR(trans)) {
|
|
ret = PTR_ERR(trans);
|
|
|
|
/*
|
|
* We committed the transaction and there's no currently
|
|
* running transaction, this means everything we care
|
|
* about made it to disk and we are done.
|
|
*/
|
|
if (ret == -ENOENT)
|
|
ret = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
ret = btrfs_commit_transaction(trans);
|
|
out:
|
|
ASSERT(list_empty(&ctx.list));
|
|
err = file_check_and_advance_wb_err(file);
|
|
if (!ret)
|
|
ret = err;
|
|
return ret > 0 ? -EIO : ret;
|
|
|
|
out_release_extents:
|
|
btrfs_release_log_ctx_extents(&ctx);
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
goto out;
|
|
}
|
|
|
|
static const struct vm_operations_struct btrfs_file_vm_ops = {
|
|
.fault = filemap_fault,
|
|
.map_pages = filemap_map_pages,
|
|
.page_mkwrite = btrfs_page_mkwrite,
|
|
.speculative = true,
|
|
};
|
|
|
|
static int btrfs_file_mmap(struct file *filp, struct vm_area_struct *vma)
|
|
{
|
|
struct address_space *mapping = filp->f_mapping;
|
|
|
|
if (!mapping->a_ops->readpage)
|
|
return -ENOEXEC;
|
|
|
|
file_accessed(filp);
|
|
vma->vm_ops = &btrfs_file_vm_ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hole_mergeable(struct btrfs_inode *inode, struct extent_buffer *leaf,
|
|
int slot, u64 start, u64 end)
|
|
{
|
|
struct btrfs_file_extent_item *fi;
|
|
struct btrfs_key key;
|
|
|
|
if (slot < 0 || slot >= btrfs_header_nritems(leaf))
|
|
return 0;
|
|
|
|
btrfs_item_key_to_cpu(leaf, &key, slot);
|
|
if (key.objectid != btrfs_ino(inode) ||
|
|
key.type != BTRFS_EXTENT_DATA_KEY)
|
|
return 0;
|
|
|
|
fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
|
|
|
|
if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG)
|
|
return 0;
|
|
|
|
if (btrfs_file_extent_disk_bytenr(leaf, fi))
|
|
return 0;
|
|
|
|
if (key.offset == end)
|
|
return 1;
|
|
if (key.offset + btrfs_file_extent_num_bytes(leaf, fi) == start)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int fill_holes(struct btrfs_trans_handle *trans,
|
|
struct btrfs_inode *inode,
|
|
struct btrfs_path *path, u64 offset, u64 end)
|
|
{
|
|
struct btrfs_fs_info *fs_info = trans->fs_info;
|
|
struct btrfs_root *root = inode->root;
|
|
struct extent_buffer *leaf;
|
|
struct btrfs_file_extent_item *fi;
|
|
struct extent_map *hole_em;
|
|
struct extent_map_tree *em_tree = &inode->extent_tree;
|
|
struct btrfs_key key;
|
|
int ret;
|
|
|
|
if (btrfs_fs_incompat(fs_info, NO_HOLES))
|
|
goto out;
|
|
|
|
key.objectid = btrfs_ino(inode);
|
|
key.type = BTRFS_EXTENT_DATA_KEY;
|
|
key.offset = offset;
|
|
|
|
ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
|
|
if (ret <= 0) {
|
|
/*
|
|
* We should have dropped this offset, so if we find it then
|
|
* something has gone horribly wrong.
|
|
*/
|
|
if (ret == 0)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
leaf = path->nodes[0];
|
|
if (hole_mergeable(inode, leaf, path->slots[0] - 1, offset, end)) {
|
|
u64 num_bytes;
|
|
|
|
path->slots[0]--;
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
num_bytes = btrfs_file_extent_num_bytes(leaf, fi) +
|
|
end - offset;
|
|
btrfs_set_file_extent_num_bytes(leaf, fi, num_bytes);
|
|
btrfs_set_file_extent_ram_bytes(leaf, fi, num_bytes);
|
|
btrfs_set_file_extent_offset(leaf, fi, 0);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
goto out;
|
|
}
|
|
|
|
if (hole_mergeable(inode, leaf, path->slots[0], offset, end)) {
|
|
u64 num_bytes;
|
|
|
|
key.offset = offset;
|
|
btrfs_set_item_key_safe(fs_info, path, &key);
|
|
fi = btrfs_item_ptr(leaf, path->slots[0],
|
|
struct btrfs_file_extent_item);
|
|
num_bytes = btrfs_file_extent_num_bytes(leaf, fi) + end -
|
|
offset;
|
|
btrfs_set_file_extent_num_bytes(leaf, fi, num_bytes);
|
|
btrfs_set_file_extent_ram_bytes(leaf, fi, num_bytes);
|
|
btrfs_set_file_extent_offset(leaf, fi, 0);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
goto out;
|
|
}
|
|
btrfs_release_path(path);
|
|
|
|
ret = btrfs_insert_file_extent(trans, root, btrfs_ino(inode),
|
|
offset, 0, 0, end - offset, 0, end - offset, 0, 0, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
out:
|
|
btrfs_release_path(path);
|
|
|
|
hole_em = alloc_extent_map();
|
|
if (!hole_em) {
|
|
btrfs_drop_extent_cache(inode, offset, end - 1, 0);
|
|
set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags);
|
|
} else {
|
|
hole_em->start = offset;
|
|
hole_em->len = end - offset;
|
|
hole_em->ram_bytes = hole_em->len;
|
|
hole_em->orig_start = offset;
|
|
|
|
hole_em->block_start = EXTENT_MAP_HOLE;
|
|
hole_em->block_len = 0;
|
|
hole_em->orig_block_len = 0;
|
|
hole_em->compress_type = BTRFS_COMPRESS_NONE;
|
|
hole_em->generation = trans->transid;
|
|
|
|
do {
|
|
btrfs_drop_extent_cache(inode, offset, end - 1, 0);
|
|
write_lock(&em_tree->lock);
|
|
ret = add_extent_mapping(em_tree, hole_em, 1);
|
|
write_unlock(&em_tree->lock);
|
|
} while (ret == -EEXIST);
|
|
free_extent_map(hole_em);
|
|
if (ret)
|
|
set_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
|
|
&inode->runtime_flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Find a hole extent on given inode and change start/len to the end of hole
|
|
* extent.(hole/vacuum extent whose em->start <= start &&
|
|
* em->start + em->len > start)
|
|
* When a hole extent is found, return 1 and modify start/len.
|
|
*/
|
|
static int find_first_non_hole(struct btrfs_inode *inode, u64 *start, u64 *len)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
struct extent_map *em;
|
|
int ret = 0;
|
|
|
|
em = btrfs_get_extent(inode, NULL, 0,
|
|
round_down(*start, fs_info->sectorsize),
|
|
round_up(*len, fs_info->sectorsize));
|
|
if (IS_ERR(em))
|
|
return PTR_ERR(em);
|
|
|
|
/* Hole or vacuum extent(only exists in no-hole mode) */
|
|
if (em->block_start == EXTENT_MAP_HOLE) {
|
|
ret = 1;
|
|
*len = em->start + em->len > *start + *len ?
|
|
0 : *start + *len - em->start - em->len;
|
|
*start = em->start + em->len;
|
|
}
|
|
free_extent_map(em);
|
|
return ret;
|
|
}
|
|
|
|
static int btrfs_punch_hole_lock_range(struct inode *inode,
|
|
const u64 lockstart,
|
|
const u64 lockend,
|
|
struct extent_state **cached_state)
|
|
{
|
|
/*
|
|
* For subpage case, if the range is not at page boundary, we could
|
|
* have pages at the leading/tailing part of the range.
|
|
* This could lead to dead loop since filemap_range_has_page()
|
|
* will always return true.
|
|
* So here we need to do extra page alignment for
|
|
* filemap_range_has_page().
|
|
*/
|
|
const u64 page_lockstart = round_up(lockstart, PAGE_SIZE);
|
|
const u64 page_lockend = round_down(lockend + 1, PAGE_SIZE) - 1;
|
|
|
|
while (1) {
|
|
struct btrfs_ordered_extent *ordered;
|
|
int ret;
|
|
|
|
truncate_pagecache_range(inode, lockstart, lockend);
|
|
|
|
lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend,
|
|
cached_state);
|
|
ordered = btrfs_lookup_first_ordered_extent(BTRFS_I(inode),
|
|
lockend);
|
|
|
|
/*
|
|
* We need to make sure we have no ordered extents in this range
|
|
* and nobody raced in and read a page in this range, if we did
|
|
* we need to try again.
|
|
*/
|
|
if ((!ordered ||
|
|
(ordered->file_offset + ordered->num_bytes <= lockstart ||
|
|
ordered->file_offset > lockend)) &&
|
|
!filemap_range_has_page(inode->i_mapping,
|
|
page_lockstart, page_lockend)) {
|
|
if (ordered)
|
|
btrfs_put_ordered_extent(ordered);
|
|
break;
|
|
}
|
|
if (ordered)
|
|
btrfs_put_ordered_extent(ordered);
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart,
|
|
lockend, cached_state);
|
|
ret = btrfs_wait_ordered_range(inode, lockstart,
|
|
lockend - lockstart + 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int btrfs_insert_replace_extent(struct btrfs_trans_handle *trans,
|
|
struct btrfs_inode *inode,
|
|
struct btrfs_path *path,
|
|
struct btrfs_replace_extent_info *extent_info,
|
|
const u64 replace_len,
|
|
const u64 bytes_to_drop)
|
|
{
|
|
struct btrfs_fs_info *fs_info = trans->fs_info;
|
|
struct btrfs_root *root = inode->root;
|
|
struct btrfs_file_extent_item *extent;
|
|
struct extent_buffer *leaf;
|
|
struct btrfs_key key;
|
|
int slot;
|
|
struct btrfs_ref ref = { 0 };
|
|
int ret;
|
|
|
|
if (replace_len == 0)
|
|
return 0;
|
|
|
|
if (extent_info->disk_offset == 0 &&
|
|
btrfs_fs_incompat(fs_info, NO_HOLES)) {
|
|
btrfs_update_inode_bytes(inode, 0, bytes_to_drop);
|
|
return 0;
|
|
}
|
|
|
|
key.objectid = btrfs_ino(inode);
|
|
key.type = BTRFS_EXTENT_DATA_KEY;
|
|
key.offset = extent_info->file_offset;
|
|
ret = btrfs_insert_empty_item(trans, root, path, &key,
|
|
sizeof(struct btrfs_file_extent_item));
|
|
if (ret)
|
|
return ret;
|
|
leaf = path->nodes[0];
|
|
slot = path->slots[0];
|
|
write_extent_buffer(leaf, extent_info->extent_buf,
|
|
btrfs_item_ptr_offset(leaf, slot),
|
|
sizeof(struct btrfs_file_extent_item));
|
|
extent = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
|
|
ASSERT(btrfs_file_extent_type(leaf, extent) != BTRFS_FILE_EXTENT_INLINE);
|
|
btrfs_set_file_extent_offset(leaf, extent, extent_info->data_offset);
|
|
btrfs_set_file_extent_num_bytes(leaf, extent, replace_len);
|
|
if (extent_info->is_new_extent)
|
|
btrfs_set_file_extent_generation(leaf, extent, trans->transid);
|
|
btrfs_mark_buffer_dirty(leaf);
|
|
btrfs_release_path(path);
|
|
|
|
ret = btrfs_inode_set_file_extent_range(inode, extent_info->file_offset,
|
|
replace_len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* If it's a hole, nothing more needs to be done. */
|
|
if (extent_info->disk_offset == 0) {
|
|
btrfs_update_inode_bytes(inode, 0, bytes_to_drop);
|
|
return 0;
|
|
}
|
|
|
|
btrfs_update_inode_bytes(inode, replace_len, bytes_to_drop);
|
|
|
|
if (extent_info->is_new_extent && extent_info->insertions == 0) {
|
|
key.objectid = extent_info->disk_offset;
|
|
key.type = BTRFS_EXTENT_ITEM_KEY;
|
|
key.offset = extent_info->disk_len;
|
|
ret = btrfs_alloc_reserved_file_extent(trans, root,
|
|
btrfs_ino(inode),
|
|
extent_info->file_offset,
|
|
extent_info->qgroup_reserved,
|
|
&key);
|
|
} else {
|
|
u64 ref_offset;
|
|
|
|
btrfs_init_generic_ref(&ref, BTRFS_ADD_DELAYED_REF,
|
|
extent_info->disk_offset,
|
|
extent_info->disk_len, 0);
|
|
ref_offset = extent_info->file_offset - extent_info->data_offset;
|
|
btrfs_init_data_ref(&ref, root->root_key.objectid,
|
|
btrfs_ino(inode), ref_offset, 0, false);
|
|
ret = btrfs_inc_extent_ref(trans, &ref);
|
|
}
|
|
|
|
extent_info->insertions++;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The respective range must have been previously locked, as well as the inode.
|
|
* The end offset is inclusive (last byte of the range).
|
|
* @extent_info is NULL for fallocate's hole punching and non-NULL when replacing
|
|
* the file range with an extent.
|
|
* When not punching a hole, we don't want to end up in a state where we dropped
|
|
* extents without inserting a new one, so we must abort the transaction to avoid
|
|
* a corruption.
|
|
*/
|
|
int btrfs_replace_file_extents(struct btrfs_inode *inode,
|
|
struct btrfs_path *path, const u64 start,
|
|
const u64 end,
|
|
struct btrfs_replace_extent_info *extent_info,
|
|
struct btrfs_trans_handle **trans_out)
|
|
{
|
|
struct btrfs_drop_extents_args drop_args = { 0 };
|
|
struct btrfs_root *root = inode->root;
|
|
struct btrfs_fs_info *fs_info = root->fs_info;
|
|
u64 min_size = btrfs_calc_insert_metadata_size(fs_info, 1);
|
|
u64 ino_size = round_up(inode->vfs_inode.i_size, fs_info->sectorsize);
|
|
struct btrfs_trans_handle *trans = NULL;
|
|
struct btrfs_block_rsv *rsv;
|
|
unsigned int rsv_count;
|
|
u64 cur_offset;
|
|
u64 len = end - start;
|
|
int ret = 0;
|
|
|
|
if (end <= start)
|
|
return -EINVAL;
|
|
|
|
rsv = btrfs_alloc_block_rsv(fs_info, BTRFS_BLOCK_RSV_TEMP);
|
|
if (!rsv) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
rsv->size = btrfs_calc_insert_metadata_size(fs_info, 1);
|
|
rsv->failfast = 1;
|
|
|
|
/*
|
|
* 1 - update the inode
|
|
* 1 - removing the extents in the range
|
|
* 1 - adding the hole extent if no_holes isn't set or if we are
|
|
* replacing the range with a new extent
|
|
*/
|
|
if (!btrfs_fs_incompat(fs_info, NO_HOLES) || extent_info)
|
|
rsv_count = 3;
|
|
else
|
|
rsv_count = 2;
|
|
|
|
trans = btrfs_start_transaction(root, rsv_count);
|
|
if (IS_ERR(trans)) {
|
|
ret = PTR_ERR(trans);
|
|
trans = NULL;
|
|
goto out_free;
|
|
}
|
|
|
|
ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, rsv,
|
|
min_size, false);
|
|
BUG_ON(ret);
|
|
trans->block_rsv = rsv;
|
|
|
|
cur_offset = start;
|
|
drop_args.path = path;
|
|
drop_args.end = end + 1;
|
|
drop_args.drop_cache = true;
|
|
while (cur_offset < end) {
|
|
drop_args.start = cur_offset;
|
|
ret = btrfs_drop_extents(trans, root, inode, &drop_args);
|
|
/* If we are punching a hole decrement the inode's byte count */
|
|
if (!extent_info)
|
|
btrfs_update_inode_bytes(inode, 0,
|
|
drop_args.bytes_found);
|
|
if (ret != -ENOSPC) {
|
|
/*
|
|
* The only time we don't want to abort is if we are
|
|
* attempting to clone a partial inline extent, in which
|
|
* case we'll get EOPNOTSUPP. However if we aren't
|
|
* clone we need to abort no matter what, because if we
|
|
* got EOPNOTSUPP via prealloc then we messed up and
|
|
* need to abort.
|
|
*/
|
|
if (ret &&
|
|
(ret != -EOPNOTSUPP ||
|
|
(extent_info && extent_info->is_new_extent)))
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
|
|
trans->block_rsv = &fs_info->trans_block_rsv;
|
|
|
|
if (!extent_info && cur_offset < drop_args.drop_end &&
|
|
cur_offset < ino_size) {
|
|
ret = fill_holes(trans, inode, path, cur_offset,
|
|
drop_args.drop_end);
|
|
if (ret) {
|
|
/*
|
|
* If we failed then we didn't insert our hole
|
|
* entries for the area we dropped, so now the
|
|
* fs is corrupted, so we must abort the
|
|
* transaction.
|
|
*/
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
} else if (!extent_info && cur_offset < drop_args.drop_end) {
|
|
/*
|
|
* We are past the i_size here, but since we didn't
|
|
* insert holes we need to clear the mapped area so we
|
|
* know to not set disk_i_size in this area until a new
|
|
* file extent is inserted here.
|
|
*/
|
|
ret = btrfs_inode_clear_file_extent_range(inode,
|
|
cur_offset,
|
|
drop_args.drop_end - cur_offset);
|
|
if (ret) {
|
|
/*
|
|
* We couldn't clear our area, so we could
|
|
* presumably adjust up and corrupt the fs, so
|
|
* we need to abort.
|
|
*/
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (extent_info &&
|
|
drop_args.drop_end > extent_info->file_offset) {
|
|
u64 replace_len = drop_args.drop_end -
|
|
extent_info->file_offset;
|
|
|
|
ret = btrfs_insert_replace_extent(trans, inode, path,
|
|
extent_info, replace_len,
|
|
drop_args.bytes_found);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
break;
|
|
}
|
|
extent_info->data_len -= replace_len;
|
|
extent_info->data_offset += replace_len;
|
|
extent_info->file_offset += replace_len;
|
|
}
|
|
|
|
ret = btrfs_update_inode(trans, root, inode);
|
|
if (ret)
|
|
break;
|
|
|
|
btrfs_end_transaction(trans);
|
|
btrfs_btree_balance_dirty(fs_info);
|
|
|
|
trans = btrfs_start_transaction(root, rsv_count);
|
|
if (IS_ERR(trans)) {
|
|
ret = PTR_ERR(trans);
|
|
trans = NULL;
|
|
break;
|
|
}
|
|
|
|
ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv,
|
|
rsv, min_size, false);
|
|
BUG_ON(ret); /* shouldn't happen */
|
|
trans->block_rsv = rsv;
|
|
|
|
cur_offset = drop_args.drop_end;
|
|
len = end - cur_offset;
|
|
if (!extent_info && len) {
|
|
ret = find_first_non_hole(inode, &cur_offset, &len);
|
|
if (unlikely(ret < 0))
|
|
break;
|
|
if (ret && !len) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we were cloning, force the next fsync to be a full one since we
|
|
* we replaced (or just dropped in the case of cloning holes when
|
|
* NO_HOLES is enabled) file extent items and did not setup new extent
|
|
* maps for the replacement extents (or holes).
|
|
*/
|
|
if (extent_info && !extent_info->is_new_extent)
|
|
set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags);
|
|
|
|
if (ret)
|
|
goto out_trans;
|
|
|
|
trans->block_rsv = &fs_info->trans_block_rsv;
|
|
/*
|
|
* If we are using the NO_HOLES feature we might have had already an
|
|
* hole that overlaps a part of the region [lockstart, lockend] and
|
|
* ends at (or beyond) lockend. Since we have no file extent items to
|
|
* represent holes, drop_end can be less than lockend and so we must
|
|
* make sure we have an extent map representing the existing hole (the
|
|
* call to __btrfs_drop_extents() might have dropped the existing extent
|
|
* map representing the existing hole), otherwise the fast fsync path
|
|
* will not record the existence of the hole region
|
|
* [existing_hole_start, lockend].
|
|
*/
|
|
if (drop_args.drop_end <= end)
|
|
drop_args.drop_end = end + 1;
|
|
/*
|
|
* Don't insert file hole extent item if it's for a range beyond eof
|
|
* (because it's useless) or if it represents a 0 bytes range (when
|
|
* cur_offset == drop_end).
|
|
*/
|
|
if (!extent_info && cur_offset < ino_size &&
|
|
cur_offset < drop_args.drop_end) {
|
|
ret = fill_holes(trans, inode, path, cur_offset,
|
|
drop_args.drop_end);
|
|
if (ret) {
|
|
/* Same comment as above. */
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out_trans;
|
|
}
|
|
} else if (!extent_info && cur_offset < drop_args.drop_end) {
|
|
/* See the comment in the loop above for the reasoning here. */
|
|
ret = btrfs_inode_clear_file_extent_range(inode, cur_offset,
|
|
drop_args.drop_end - cur_offset);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out_trans;
|
|
}
|
|
|
|
}
|
|
if (extent_info) {
|
|
ret = btrfs_insert_replace_extent(trans, inode, path,
|
|
extent_info, extent_info->data_len,
|
|
drop_args.bytes_found);
|
|
if (ret) {
|
|
btrfs_abort_transaction(trans, ret);
|
|
goto out_trans;
|
|
}
|
|
}
|
|
|
|
out_trans:
|
|
if (!trans)
|
|
goto out_free;
|
|
|
|
trans->block_rsv = &fs_info->trans_block_rsv;
|
|
if (ret)
|
|
btrfs_end_transaction(trans);
|
|
else
|
|
*trans_out = trans;
|
|
out_free:
|
|
btrfs_free_block_rsv(fs_info, rsv);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int btrfs_punch_hole(struct file *file, loff_t offset, loff_t len)
|
|
{
|
|
struct inode *inode = file_inode(file);
|
|
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
|
|
struct btrfs_root *root = BTRFS_I(inode)->root;
|
|
struct extent_state *cached_state = NULL;
|
|
struct btrfs_path *path;
|
|
struct btrfs_trans_handle *trans = NULL;
|
|
u64 lockstart;
|
|
u64 lockend;
|
|
u64 tail_start;
|
|
u64 tail_len;
|
|
u64 orig_start = offset;
|
|
int ret = 0;
|
|
bool same_block;
|
|
u64 ino_size;
|
|
bool truncated_block = false;
|
|
bool updated_inode = false;
|
|
|
|
ret = btrfs_wait_ordered_range(inode, offset, len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
btrfs_inode_lock(inode, BTRFS_ILOCK_MMAP);
|
|
ino_size = round_up(inode->i_size, fs_info->sectorsize);
|
|
ret = find_first_non_hole(BTRFS_I(inode), &offset, &len);
|
|
if (ret < 0)
|
|
goto out_only_mutex;
|
|
if (ret && !len) {
|
|
/* Already in a large hole */
|
|
ret = 0;
|
|
goto out_only_mutex;
|
|
}
|
|
|
|
ret = file_modified(file);
|
|
if (ret)
|
|
goto out_only_mutex;
|
|
|
|
lockstart = round_up(offset, btrfs_inode_sectorsize(BTRFS_I(inode)));
|
|
lockend = round_down(offset + len,
|
|
btrfs_inode_sectorsize(BTRFS_I(inode))) - 1;
|
|
same_block = (BTRFS_BYTES_TO_BLKS(fs_info, offset))
|
|
== (BTRFS_BYTES_TO_BLKS(fs_info, offset + len - 1));
|
|
/*
|
|
* We needn't truncate any block which is beyond the end of the file
|
|
* because we are sure there is no data there.
|
|
*/
|
|
/*
|
|
* Only do this if we are in the same block and we aren't doing the
|
|
* entire block.
|
|
*/
|
|
if (same_block && len < fs_info->sectorsize) {
|
|
if (offset < ino_size) {
|
|
truncated_block = true;
|
|
ret = btrfs_truncate_block(BTRFS_I(inode), offset, len,
|
|
0);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
goto out_only_mutex;
|
|
}
|
|
|
|
/* zero back part of the first block */
|
|
if (offset < ino_size) {
|
|
truncated_block = true;
|
|
ret = btrfs_truncate_block(BTRFS_I(inode), offset, 0, 0);
|
|
if (ret) {
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Check the aligned pages after the first unaligned page,
|
|
* if offset != orig_start, which means the first unaligned page
|
|
* including several following pages are already in holes,
|
|
* the extra check can be skipped */
|
|
if (offset == orig_start) {
|
|
/* after truncate page, check hole again */
|
|
len = offset + len - lockstart;
|
|
offset = lockstart;
|
|
ret = find_first_non_hole(BTRFS_I(inode), &offset, &len);
|
|
if (ret < 0)
|
|
goto out_only_mutex;
|
|
if (ret && !len) {
|
|
ret = 0;
|
|
goto out_only_mutex;
|
|
}
|
|
lockstart = offset;
|
|
}
|
|
|
|
/* Check the tail unaligned part is in a hole */
|
|
tail_start = lockend + 1;
|
|
tail_len = offset + len - tail_start;
|
|
if (tail_len) {
|
|
ret = find_first_non_hole(BTRFS_I(inode), &tail_start, &tail_len);
|
|
if (unlikely(ret < 0))
|
|
goto out_only_mutex;
|
|
if (!ret) {
|
|
/* zero the front end of the last page */
|
|
if (tail_start + tail_len < ino_size) {
|
|
truncated_block = true;
|
|
ret = btrfs_truncate_block(BTRFS_I(inode),
|
|
tail_start + tail_len,
|
|
0, 1);
|
|
if (ret)
|
|
goto out_only_mutex;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (lockend < lockstart) {
|
|
ret = 0;
|
|
goto out_only_mutex;
|
|
}
|
|
|
|
ret = btrfs_punch_hole_lock_range(inode, lockstart, lockend,
|
|
&cached_state);
|
|
if (ret)
|
|
goto out_only_mutex;
|
|
|
|
path = btrfs_alloc_path();
|
|
if (!path) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ret = btrfs_replace_file_extents(BTRFS_I(inode), path, lockstart,
|
|
lockend, NULL, &trans);
|
|
btrfs_free_path(path);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ASSERT(trans != NULL);
|
|
inode_inc_iversion(inode);
|
|
inode->i_mtime = inode->i_ctime = current_time(inode);
|
|
ret = btrfs_update_inode(trans, root, BTRFS_I(inode));
|
|
updated_inode = true;
|
|
btrfs_end_transaction(trans);
|
|
btrfs_btree_balance_dirty(fs_info);
|
|
out:
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
|
|
&cached_state);
|
|
out_only_mutex:
|
|
if (!updated_inode && truncated_block && !ret) {
|
|
/*
|
|
* If we only end up zeroing part of a page, we still need to
|
|
* update the inode item, so that all the time fields are
|
|
* updated as well as the necessary btrfs inode in memory fields
|
|
* for detecting, at fsync time, if the inode isn't yet in the
|
|
* log tree or it's there but not up to date.
|
|
*/
|
|
struct timespec64 now = current_time(inode);
|
|
|
|
inode_inc_iversion(inode);
|
|
inode->i_mtime = now;
|
|
inode->i_ctime = now;
|
|
trans = btrfs_start_transaction(root, 1);
|
|
if (IS_ERR(trans)) {
|
|
ret = PTR_ERR(trans);
|
|
} else {
|
|
int ret2;
|
|
|
|
ret = btrfs_update_inode(trans, root, BTRFS_I(inode));
|
|
ret2 = btrfs_end_transaction(trans);
|
|
if (!ret)
|
|
ret = ret2;
|
|
}
|
|
}
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
return ret;
|
|
}
|
|
|
|
/* Helper structure to record which range is already reserved */
|
|
struct falloc_range {
|
|
struct list_head list;
|
|
u64 start;
|
|
u64 len;
|
|
};
|
|
|
|
/*
|
|
* Helper function to add falloc range
|
|
*
|
|
* Caller should have locked the larger range of extent containing
|
|
* [start, len)
|
|
*/
|
|
static int add_falloc_range(struct list_head *head, u64 start, u64 len)
|
|
{
|
|
struct falloc_range *range = NULL;
|
|
|
|
if (!list_empty(head)) {
|
|
/*
|
|
* As fallocate iterates by bytenr order, we only need to check
|
|
* the last range.
|
|
*/
|
|
range = list_last_entry(head, struct falloc_range, list);
|
|
if (range->start + range->len == start) {
|
|
range->len += len;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
range = kmalloc(sizeof(*range), GFP_KERNEL);
|
|
if (!range)
|
|
return -ENOMEM;
|
|
range->start = start;
|
|
range->len = len;
|
|
list_add_tail(&range->list, head);
|
|
return 0;
|
|
}
|
|
|
|
static int btrfs_fallocate_update_isize(struct inode *inode,
|
|
const u64 end,
|
|
const int mode)
|
|
{
|
|
struct btrfs_trans_handle *trans;
|
|
struct btrfs_root *root = BTRFS_I(inode)->root;
|
|
int ret;
|
|
int ret2;
|
|
|
|
if (mode & FALLOC_FL_KEEP_SIZE || end <= i_size_read(inode))
|
|
return 0;
|
|
|
|
trans = btrfs_start_transaction(root, 1);
|
|
if (IS_ERR(trans))
|
|
return PTR_ERR(trans);
|
|
|
|
inode->i_ctime = current_time(inode);
|
|
i_size_write(inode, end);
|
|
btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0);
|
|
ret = btrfs_update_inode(trans, root, BTRFS_I(inode));
|
|
ret2 = btrfs_end_transaction(trans);
|
|
|
|
return ret ? ret : ret2;
|
|
}
|
|
|
|
enum {
|
|
RANGE_BOUNDARY_WRITTEN_EXTENT,
|
|
RANGE_BOUNDARY_PREALLOC_EXTENT,
|
|
RANGE_BOUNDARY_HOLE,
|
|
};
|
|
|
|
static int btrfs_zero_range_check_range_boundary(struct btrfs_inode *inode,
|
|
u64 offset)
|
|
{
|
|
const u64 sectorsize = btrfs_inode_sectorsize(inode);
|
|
struct extent_map *em;
|
|
int ret;
|
|
|
|
offset = round_down(offset, sectorsize);
|
|
em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize);
|
|
if (IS_ERR(em))
|
|
return PTR_ERR(em);
|
|
|
|
if (em->block_start == EXTENT_MAP_HOLE)
|
|
ret = RANGE_BOUNDARY_HOLE;
|
|
else if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
|
|
ret = RANGE_BOUNDARY_PREALLOC_EXTENT;
|
|
else
|
|
ret = RANGE_BOUNDARY_WRITTEN_EXTENT;
|
|
|
|
free_extent_map(em);
|
|
return ret;
|
|
}
|
|
|
|
static int btrfs_zero_range(struct inode *inode,
|
|
loff_t offset,
|
|
loff_t len,
|
|
const int mode)
|
|
{
|
|
struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
|
|
struct extent_map *em;
|
|
struct extent_changeset *data_reserved = NULL;
|
|
int ret;
|
|
u64 alloc_hint = 0;
|
|
const u64 sectorsize = btrfs_inode_sectorsize(BTRFS_I(inode));
|
|
u64 alloc_start = round_down(offset, sectorsize);
|
|
u64 alloc_end = round_up(offset + len, sectorsize);
|
|
u64 bytes_to_reserve = 0;
|
|
bool space_reserved = false;
|
|
|
|
inode_dio_wait(inode);
|
|
|
|
em = btrfs_get_extent(BTRFS_I(inode), NULL, 0, alloc_start,
|
|
alloc_end - alloc_start);
|
|
if (IS_ERR(em)) {
|
|
ret = PTR_ERR(em);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Avoid hole punching and extent allocation for some cases. More cases
|
|
* could be considered, but these are unlikely common and we keep things
|
|
* as simple as possible for now. Also, intentionally, if the target
|
|
* range contains one or more prealloc extents together with regular
|
|
* extents and holes, we drop all the existing extents and allocate a
|
|
* new prealloc extent, so that we get a larger contiguous disk extent.
|
|
*/
|
|
if (em->start <= alloc_start &&
|
|
test_bit(EXTENT_FLAG_PREALLOC, &em->flags)) {
|
|
const u64 em_end = em->start + em->len;
|
|
|
|
if (em_end >= offset + len) {
|
|
/*
|
|
* The whole range is already a prealloc extent,
|
|
* do nothing except updating the inode's i_size if
|
|
* needed.
|
|
*/
|
|
free_extent_map(em);
|
|
ret = btrfs_fallocate_update_isize(inode, offset + len,
|
|
mode);
|
|
goto out;
|
|
}
|
|
/*
|
|
* Part of the range is already a prealloc extent, so operate
|
|
* only on the remaining part of the range.
|
|
*/
|
|
alloc_start = em_end;
|
|
ASSERT(IS_ALIGNED(alloc_start, sectorsize));
|
|
len = offset + len - alloc_start;
|
|
offset = alloc_start;
|
|
alloc_hint = em->block_start + em->len;
|
|
}
|
|
free_extent_map(em);
|
|
|
|
if (BTRFS_BYTES_TO_BLKS(fs_info, offset) ==
|
|
BTRFS_BYTES_TO_BLKS(fs_info, offset + len - 1)) {
|
|
em = btrfs_get_extent(BTRFS_I(inode), NULL, 0, alloc_start,
|
|
sectorsize);
|
|
if (IS_ERR(em)) {
|
|
ret = PTR_ERR(em);
|
|
goto out;
|
|
}
|
|
|
|
if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags)) {
|
|
free_extent_map(em);
|
|
ret = btrfs_fallocate_update_isize(inode, offset + len,
|
|
mode);
|
|
goto out;
|
|
}
|
|
if (len < sectorsize && em->block_start != EXTENT_MAP_HOLE) {
|
|
free_extent_map(em);
|
|
ret = btrfs_truncate_block(BTRFS_I(inode), offset, len,
|
|
0);
|
|
if (!ret)
|
|
ret = btrfs_fallocate_update_isize(inode,
|
|
offset + len,
|
|
mode);
|
|
return ret;
|
|
}
|
|
free_extent_map(em);
|
|
alloc_start = round_down(offset, sectorsize);
|
|
alloc_end = alloc_start + sectorsize;
|
|
goto reserve_space;
|
|
}
|
|
|
|
alloc_start = round_up(offset, sectorsize);
|
|
alloc_end = round_down(offset + len, sectorsize);
|
|
|
|
/*
|
|
* For unaligned ranges, check the pages at the boundaries, they might
|
|
* map to an extent, in which case we need to partially zero them, or
|
|
* they might map to a hole, in which case we need our allocation range
|
|
* to cover them.
|
|
*/
|
|
if (!IS_ALIGNED(offset, sectorsize)) {
|
|
ret = btrfs_zero_range_check_range_boundary(BTRFS_I(inode),
|
|
offset);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (ret == RANGE_BOUNDARY_HOLE) {
|
|
alloc_start = round_down(offset, sectorsize);
|
|
ret = 0;
|
|
} else if (ret == RANGE_BOUNDARY_WRITTEN_EXTENT) {
|
|
ret = btrfs_truncate_block(BTRFS_I(inode), offset, 0, 0);
|
|
if (ret)
|
|
goto out;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
}
|
|
|
|
if (!IS_ALIGNED(offset + len, sectorsize)) {
|
|
ret = btrfs_zero_range_check_range_boundary(BTRFS_I(inode),
|
|
offset + len);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (ret == RANGE_BOUNDARY_HOLE) {
|
|
alloc_end = round_up(offset + len, sectorsize);
|
|
ret = 0;
|
|
} else if (ret == RANGE_BOUNDARY_WRITTEN_EXTENT) {
|
|
ret = btrfs_truncate_block(BTRFS_I(inode), offset + len,
|
|
0, 1);
|
|
if (ret)
|
|
goto out;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
}
|
|
|
|
reserve_space:
|
|
if (alloc_start < alloc_end) {
|
|
struct extent_state *cached_state = NULL;
|
|
const u64 lockstart = alloc_start;
|
|
const u64 lockend = alloc_end - 1;
|
|
|
|
bytes_to_reserve = alloc_end - alloc_start;
|
|
ret = btrfs_alloc_data_chunk_ondemand(BTRFS_I(inode),
|
|
bytes_to_reserve);
|
|
if (ret < 0)
|
|
goto out;
|
|
space_reserved = true;
|
|
ret = btrfs_punch_hole_lock_range(inode, lockstart, lockend,
|
|
&cached_state);
|
|
if (ret)
|
|
goto out;
|
|
ret = btrfs_qgroup_reserve_data(BTRFS_I(inode), &data_reserved,
|
|
alloc_start, bytes_to_reserve);
|
|
if (ret) {
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart,
|
|
lockend, &cached_state);
|
|
goto out;
|
|
}
|
|
ret = btrfs_prealloc_file_range(inode, mode, alloc_start,
|
|
alloc_end - alloc_start,
|
|
i_blocksize(inode),
|
|
offset + len, &alloc_hint);
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart,
|
|
lockend, &cached_state);
|
|
/* btrfs_prealloc_file_range releases reserved space on error */
|
|
if (ret) {
|
|
space_reserved = false;
|
|
goto out;
|
|
}
|
|
}
|
|
ret = btrfs_fallocate_update_isize(inode, offset + len, mode);
|
|
out:
|
|
if (ret && space_reserved)
|
|
btrfs_free_reserved_data_space(BTRFS_I(inode), data_reserved,
|
|
alloc_start, bytes_to_reserve);
|
|
extent_changeset_free(data_reserved);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static long btrfs_fallocate(struct file *file, int mode,
|
|
loff_t offset, loff_t len)
|
|
{
|
|
struct inode *inode = file_inode(file);
|
|
struct extent_state *cached_state = NULL;
|
|
struct extent_changeset *data_reserved = NULL;
|
|
struct falloc_range *range;
|
|
struct falloc_range *tmp;
|
|
struct list_head reserve_list;
|
|
u64 cur_offset;
|
|
u64 last_byte;
|
|
u64 alloc_start;
|
|
u64 alloc_end;
|
|
u64 alloc_hint = 0;
|
|
u64 locked_end;
|
|
u64 actual_end = 0;
|
|
struct extent_map *em;
|
|
int blocksize = btrfs_inode_sectorsize(BTRFS_I(inode));
|
|
int ret;
|
|
|
|
/* Do not allow fallocate in ZONED mode */
|
|
if (btrfs_is_zoned(btrfs_sb(inode->i_sb)))
|
|
return -EOPNOTSUPP;
|
|
|
|
alloc_start = round_down(offset, blocksize);
|
|
alloc_end = round_up(offset + len, blocksize);
|
|
cur_offset = alloc_start;
|
|
|
|
/* Make sure we aren't being give some crap mode */
|
|
if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
|
|
FALLOC_FL_ZERO_RANGE))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (mode & FALLOC_FL_PUNCH_HOLE)
|
|
return btrfs_punch_hole(file, offset, len);
|
|
|
|
/*
|
|
* Only trigger disk allocation, don't trigger qgroup reserve
|
|
*
|
|
* For qgroup space, it will be checked later.
|
|
*/
|
|
if (!(mode & FALLOC_FL_ZERO_RANGE)) {
|
|
ret = btrfs_alloc_data_chunk_ondemand(BTRFS_I(inode),
|
|
alloc_end - alloc_start);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
btrfs_inode_lock(inode, BTRFS_ILOCK_MMAP);
|
|
|
|
if (!(mode & FALLOC_FL_KEEP_SIZE) && offset + len > inode->i_size) {
|
|
ret = inode_newsize_ok(inode, offset + len);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
ret = file_modified(file);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/*
|
|
* TODO: Move these two operations after we have checked
|
|
* accurate reserved space, or fallocate can still fail but
|
|
* with page truncated or size expanded.
|
|
*
|
|
* But that's a minor problem and won't do much harm BTW.
|
|
*/
|
|
if (alloc_start > inode->i_size) {
|
|
ret = btrfs_cont_expand(BTRFS_I(inode), i_size_read(inode),
|
|
alloc_start);
|
|
if (ret)
|
|
goto out;
|
|
} else if (offset + len > inode->i_size) {
|
|
/*
|
|
* If we are fallocating from the end of the file onward we
|
|
* need to zero out the end of the block if i_size lands in the
|
|
* middle of a block.
|
|
*/
|
|
ret = btrfs_truncate_block(BTRFS_I(inode), inode->i_size, 0, 0);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* wait for ordered IO before we have any locks. We'll loop again
|
|
* below with the locks held.
|
|
*/
|
|
ret = btrfs_wait_ordered_range(inode, alloc_start,
|
|
alloc_end - alloc_start);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (mode & FALLOC_FL_ZERO_RANGE) {
|
|
ret = btrfs_zero_range(inode, offset, len, mode);
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
return ret;
|
|
}
|
|
|
|
locked_end = alloc_end - 1;
|
|
while (1) {
|
|
struct btrfs_ordered_extent *ordered;
|
|
|
|
/* the extent lock is ordered inside the running
|
|
* transaction
|
|
*/
|
|
lock_extent_bits(&BTRFS_I(inode)->io_tree, alloc_start,
|
|
locked_end, &cached_state);
|
|
ordered = btrfs_lookup_first_ordered_extent(BTRFS_I(inode),
|
|
locked_end);
|
|
|
|
if (ordered &&
|
|
ordered->file_offset + ordered->num_bytes > alloc_start &&
|
|
ordered->file_offset < alloc_end) {
|
|
btrfs_put_ordered_extent(ordered);
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree,
|
|
alloc_start, locked_end,
|
|
&cached_state);
|
|
/*
|
|
* we can't wait on the range with the transaction
|
|
* running or with the extent lock held
|
|
*/
|
|
ret = btrfs_wait_ordered_range(inode, alloc_start,
|
|
alloc_end - alloc_start);
|
|
if (ret)
|
|
goto out;
|
|
} else {
|
|
if (ordered)
|
|
btrfs_put_ordered_extent(ordered);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* First, check if we exceed the qgroup limit */
|
|
INIT_LIST_HEAD(&reserve_list);
|
|
while (cur_offset < alloc_end) {
|
|
em = btrfs_get_extent(BTRFS_I(inode), NULL, 0, cur_offset,
|
|
alloc_end - cur_offset);
|
|
if (IS_ERR(em)) {
|
|
ret = PTR_ERR(em);
|
|
break;
|
|
}
|
|
last_byte = min(extent_map_end(em), alloc_end);
|
|
actual_end = min_t(u64, extent_map_end(em), offset + len);
|
|
last_byte = ALIGN(last_byte, blocksize);
|
|
if (em->block_start == EXTENT_MAP_HOLE ||
|
|
(cur_offset >= inode->i_size &&
|
|
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
|
|
ret = add_falloc_range(&reserve_list, cur_offset,
|
|
last_byte - cur_offset);
|
|
if (ret < 0) {
|
|
free_extent_map(em);
|
|
break;
|
|
}
|
|
ret = btrfs_qgroup_reserve_data(BTRFS_I(inode),
|
|
&data_reserved, cur_offset,
|
|
last_byte - cur_offset);
|
|
if (ret < 0) {
|
|
cur_offset = last_byte;
|
|
free_extent_map(em);
|
|
break;
|
|
}
|
|
} else {
|
|
/*
|
|
* Do not need to reserve unwritten extent for this
|
|
* range, free reserved data space first, otherwise
|
|
* it'll result in false ENOSPC error.
|
|
*/
|
|
btrfs_free_reserved_data_space(BTRFS_I(inode),
|
|
data_reserved, cur_offset,
|
|
last_byte - cur_offset);
|
|
}
|
|
free_extent_map(em);
|
|
cur_offset = last_byte;
|
|
}
|
|
|
|
/*
|
|
* If ret is still 0, means we're OK to fallocate.
|
|
* Or just cleanup the list and exit.
|
|
*/
|
|
list_for_each_entry_safe(range, tmp, &reserve_list, list) {
|
|
if (!ret)
|
|
ret = btrfs_prealloc_file_range(inode, mode,
|
|
range->start,
|
|
range->len, i_blocksize(inode),
|
|
offset + len, &alloc_hint);
|
|
else
|
|
btrfs_free_reserved_data_space(BTRFS_I(inode),
|
|
data_reserved, range->start,
|
|
range->len);
|
|
list_del(&range->list);
|
|
kfree(range);
|
|
}
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
/*
|
|
* We didn't need to allocate any more space, but we still extended the
|
|
* size of the file so we need to update i_size and the inode item.
|
|
*/
|
|
ret = btrfs_fallocate_update_isize(inode, actual_end, mode);
|
|
out_unlock:
|
|
unlock_extent_cached(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
|
|
&cached_state);
|
|
out:
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP);
|
|
/* Let go of our reservation. */
|
|
if (ret != 0 && !(mode & FALLOC_FL_ZERO_RANGE))
|
|
btrfs_free_reserved_data_space(BTRFS_I(inode), data_reserved,
|
|
cur_offset, alloc_end - cur_offset);
|
|
extent_changeset_free(data_reserved);
|
|
return ret;
|
|
}
|
|
|
|
static loff_t find_desired_extent(struct btrfs_inode *inode, loff_t offset,
|
|
int whence)
|
|
{
|
|
struct btrfs_fs_info *fs_info = inode->root->fs_info;
|
|
struct extent_map *em = NULL;
|
|
struct extent_state *cached_state = NULL;
|
|
loff_t i_size = inode->vfs_inode.i_size;
|
|
u64 lockstart;
|
|
u64 lockend;
|
|
u64 start;
|
|
u64 len;
|
|
int ret = 0;
|
|
|
|
if (i_size == 0 || offset >= i_size)
|
|
return -ENXIO;
|
|
|
|
/*
|
|
* offset can be negative, in this case we start finding DATA/HOLE from
|
|
* the very start of the file.
|
|
*/
|
|
start = max_t(loff_t, 0, offset);
|
|
|
|
lockstart = round_down(start, fs_info->sectorsize);
|
|
lockend = round_up(i_size, fs_info->sectorsize);
|
|
if (lockend <= lockstart)
|
|
lockend = lockstart + fs_info->sectorsize;
|
|
lockend--;
|
|
len = lockend - lockstart + 1;
|
|
|
|
lock_extent_bits(&inode->io_tree, lockstart, lockend, &cached_state);
|
|
|
|
while (start < i_size) {
|
|
em = btrfs_get_extent_fiemap(inode, start, len);
|
|
if (IS_ERR(em)) {
|
|
ret = PTR_ERR(em);
|
|
em = NULL;
|
|
break;
|
|
}
|
|
|
|
if (whence == SEEK_HOLE &&
|
|
(em->block_start == EXTENT_MAP_HOLE ||
|
|
test_bit(EXTENT_FLAG_PREALLOC, &em->flags)))
|
|
break;
|
|
else if (whence == SEEK_DATA &&
|
|
(em->block_start != EXTENT_MAP_HOLE &&
|
|
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags)))
|
|
break;
|
|
|
|
start = em->start + em->len;
|
|
free_extent_map(em);
|
|
em = NULL;
|
|
cond_resched();
|
|
}
|
|
free_extent_map(em);
|
|
unlock_extent_cached(&inode->io_tree, lockstart, lockend,
|
|
&cached_state);
|
|
if (ret) {
|
|
offset = ret;
|
|
} else {
|
|
if (whence == SEEK_DATA && start >= i_size)
|
|
offset = -ENXIO;
|
|
else
|
|
offset = min_t(loff_t, start, i_size);
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int whence)
|
|
{
|
|
struct inode *inode = file->f_mapping->host;
|
|
|
|
switch (whence) {
|
|
default:
|
|
return generic_file_llseek(file, offset, whence);
|
|
case SEEK_DATA:
|
|
case SEEK_HOLE:
|
|
btrfs_inode_lock(inode, BTRFS_ILOCK_SHARED);
|
|
offset = find_desired_extent(BTRFS_I(inode), offset, whence);
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED);
|
|
break;
|
|
}
|
|
|
|
if (offset < 0)
|
|
return offset;
|
|
|
|
return vfs_setpos(file, offset, inode->i_sb->s_maxbytes);
|
|
}
|
|
|
|
static int btrfs_file_open(struct inode *inode, struct file *filp)
|
|
{
|
|
int ret;
|
|
|
|
filp->f_mode |= FMODE_NOWAIT | FMODE_BUF_RASYNC;
|
|
|
|
ret = fsverity_file_open(inode, filp);
|
|
if (ret)
|
|
return ret;
|
|
return generic_file_open(inode, filp);
|
|
}
|
|
|
|
static int check_direct_read(struct btrfs_fs_info *fs_info,
|
|
const struct iov_iter *iter, loff_t offset)
|
|
{
|
|
int ret;
|
|
int i, seg;
|
|
|
|
ret = check_direct_IO(fs_info, iter, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!iter_is_iovec(iter))
|
|
return 0;
|
|
|
|
for (seg = 0; seg < iter->nr_segs; seg++)
|
|
for (i = seg + 1; i < iter->nr_segs; i++)
|
|
if (iter->iov[seg].iov_base == iter->iov[i].iov_base)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t btrfs_direct_read(struct kiocb *iocb, struct iov_iter *to)
|
|
{
|
|
struct inode *inode = file_inode(iocb->ki_filp);
|
|
size_t prev_left = 0;
|
|
ssize_t read = 0;
|
|
ssize_t ret;
|
|
|
|
if (fsverity_active(inode))
|
|
return 0;
|
|
|
|
if (check_direct_read(btrfs_sb(inode->i_sb), to, iocb->ki_pos))
|
|
return 0;
|
|
|
|
btrfs_inode_lock(inode, BTRFS_ILOCK_SHARED);
|
|
again:
|
|
/*
|
|
* This is similar to what we do for direct IO writes, see the comment
|
|
* at btrfs_direct_write(), but we also disable page faults in addition
|
|
* to disabling them only at the iov_iter level. This is because when
|
|
* reading from a hole or prealloc extent, iomap calls iov_iter_zero(),
|
|
* which can still trigger page fault ins despite having set ->nofault
|
|
* to true of our 'to' iov_iter.
|
|
*
|
|
* The difference to direct IO writes is that we deadlock when trying
|
|
* to lock the extent range in the inode's tree during he page reads
|
|
* triggered by the fault in (while for writes it is due to waiting for
|
|
* our own ordered extent). This is because for direct IO reads,
|
|
* btrfs_dio_iomap_begin() returns with the extent range locked, which
|
|
* is only unlocked in the endio callback (end_bio_extent_readpage()).
|
|
*/
|
|
pagefault_disable();
|
|
to->nofault = true;
|
|
ret = iomap_dio_rw(iocb, to, &btrfs_dio_iomap_ops, &btrfs_dio_ops,
|
|
IOMAP_DIO_PARTIAL, read);
|
|
to->nofault = false;
|
|
pagefault_enable();
|
|
|
|
/* No increment (+=) because iomap returns a cumulative value. */
|
|
if (ret > 0)
|
|
read = ret;
|
|
|
|
if (iov_iter_count(to) > 0 && (ret == -EFAULT || ret > 0)) {
|
|
const size_t left = iov_iter_count(to);
|
|
|
|
if (left == prev_left) {
|
|
/*
|
|
* We didn't make any progress since the last attempt,
|
|
* fallback to a buffered read for the remainder of the
|
|
* range. This is just to avoid any possibility of looping
|
|
* for too long.
|
|
*/
|
|
ret = read;
|
|
} else {
|
|
/*
|
|
* We made some progress since the last retry or this is
|
|
* the first time we are retrying. Fault in as many pages
|
|
* as possible and retry.
|
|
*/
|
|
fault_in_iov_iter_writeable(to, left);
|
|
prev_left = left;
|
|
goto again;
|
|
}
|
|
}
|
|
btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED);
|
|
return ret < 0 ? ret : read;
|
|
}
|
|
|
|
static ssize_t btrfs_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
|
|
{
|
|
ssize_t ret = 0;
|
|
|
|
if (iocb->ki_flags & IOCB_DIRECT) {
|
|
ret = btrfs_direct_read(iocb, to);
|
|
if (ret < 0 || !iov_iter_count(to) ||
|
|
iocb->ki_pos >= i_size_read(file_inode(iocb->ki_filp)))
|
|
return ret;
|
|
}
|
|
|
|
return filemap_read(iocb, to, ret);
|
|
}
|
|
|
|
const struct file_operations btrfs_file_operations = {
|
|
.llseek = btrfs_file_llseek,
|
|
.read_iter = btrfs_file_read_iter,
|
|
.splice_read = generic_file_splice_read,
|
|
.write_iter = btrfs_file_write_iter,
|
|
.splice_write = iter_file_splice_write,
|
|
.mmap = btrfs_file_mmap,
|
|
.open = btrfs_file_open,
|
|
.release = btrfs_release_file,
|
|
.fsync = btrfs_sync_file,
|
|
.fallocate = btrfs_fallocate,
|
|
.unlocked_ioctl = btrfs_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = btrfs_compat_ioctl,
|
|
#endif
|
|
.remap_file_range = btrfs_remap_file_range,
|
|
};
|
|
|
|
void __cold btrfs_auto_defrag_exit(void)
|
|
{
|
|
kmem_cache_destroy(btrfs_inode_defrag_cachep);
|
|
}
|
|
|
|
int __init btrfs_auto_defrag_init(void)
|
|
{
|
|
btrfs_inode_defrag_cachep = kmem_cache_create("btrfs_inode_defrag",
|
|
sizeof(struct inode_defrag), 0,
|
|
SLAB_MEM_SPREAD,
|
|
NULL);
|
|
if (!btrfs_inode_defrag_cachep)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int btrfs_fdatawrite_range(struct inode *inode, loff_t start, loff_t end)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* So with compression we will find and lock a dirty page and clear the
|
|
* first one as dirty, setup an async extent, and immediately return
|
|
* with the entire range locked but with nobody actually marked with
|
|
* writeback. So we can't just filemap_write_and_wait_range() and
|
|
* expect it to work since it will just kick off a thread to do the
|
|
* actual work. So we need to call filemap_fdatawrite_range _again_
|
|
* since it will wait on the page lock, which won't be unlocked until
|
|
* after the pages have been marked as writeback and so we're good to go
|
|
* from there. We have to do this otherwise we'll miss the ordered
|
|
* extents and that results in badness. Please Josef, do not think you
|
|
* know better and pull this out at some point in the future, it is
|
|
* right and you are wrong.
|
|
*/
|
|
ret = filemap_fdatawrite_range(inode->i_mapping, start, end);
|
|
if (!ret && test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
|
|
&BTRFS_I(inode)->runtime_flags))
|
|
ret = filemap_fdatawrite_range(inode->i_mapping, start, end);
|
|
|
|
return ret;
|
|
}
|