Martijn Coenen 2afa70ccfe UPSTREAM: loop: Add LOOP_CONFIGURE ioctl
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.

Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.

In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
  loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
  in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
  in loop_config.info.lo_flags

Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
    0m03.40s real     0m00.02s user     0m00.03s system

Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
    0m01.94s real     0m00.01s user     0m00.01s system

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 3448914e8c)
Bug: 148607611
Change-Id: Ia235e6ca600a8080b58ca0bb2442542ecd23f95d
2020-08-10 19:41:51 +02:00
2020-08-07 10:07:58 +02:00
2020-07-23 12:36:54 +02:00
2020-08-07 10:07:58 +02:00
2020-08-07 10:07:58 +02:00
2020-08-05 11:19:16 +02:00
2020-08-07 10:07:58 +02:00
2020-07-23 12:36:54 +02:00
2020-08-05 11:19:16 +02:00
2020-08-07 10:07:58 +02:00
2020-03-01 10:17:44 +01:00
2020-08-07 10:07:58 +02:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry-picked from ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry-picked from ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [ Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)
Description
No description provided
Readme 2.4 GiB
Languages
C 97.7%
Assembly 1.2%
Shell 0.4%
Makefile 0.3%
Python 0.2%
Other 0.1%