5280d76d38
To further exploit spatial locality, the aging prefers to walk page
tables to search for young PTEs and promote hot pages. A kill switch
will be added in the next patch to disable this behavior. When
disabled, the aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in
the 2.4 kernel [1], which searches page tables for old PTEs, adds cold
pages to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the
traversal of an entire mm_struct list; the term "walk" will be applied
to page tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct
follows its owner task to the new memcg when this task is migrated.
Given an lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot
pages before it increments max_seq.
When multiple page table walkers iterate the same list, each of them
gets a unique mm_struct; therefore they can run concurrently. Page
table walkers ignore any misplaced pages, e.g., if an mm_struct was
migrated, pages it left in the previous memcg will not be promoted
when its current memcg is under reclaim. Similarly, page table walkers
will not promote pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[5.5, 7.5]%
Ops/sec KB/sec
patch1-7: 1014393.57 39455.42
patch1-8: 1078507.59 41949.15
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
45.54% lzo1x_1_do_compress (real work)
9.56% page_vma_mapped_walk
6.70% _raw_spin_unlock_irq
2.78% ptep_clear_flush
2.47% do_raw_spin_lock
2.22% __zram_bvec_write
1.87% lru_gen_look_around
1.78% memmove
1.77% obj_malloc
1.44% free_unref_page_list
patch1-8
47.02% lzo1x_1_do_compress (real work)
6.73% page_vma_mapped_walk
6.14% _raw_spin_unlock_irq
3.39% walk_pte_range
2.63% ptep_clear_flush
2.29% __zram_bvec_write
2.10% do_raw_spin_lock
1.81% memmove
1.73% obj_malloc
1.53% free_unref_page_list
Configurations:
no change
[1] https://lwn.net/Articles/23732/
[2] https://source.android.com/devices/tech/debug/scudo
Link: https://lore.kernel.org/lkml/20220309021230.721028-9-yuzhao@google.com/
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Bug: 227651406
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Change-Id: I5a3c97cf8ebf8d65d5f9528cd979a637c190053e
How do I submit patches to Android Common Kernels
-
BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
EXPORT_SYMBOL_GPL()require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export. - When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
-
LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.
Common Kernel patch requirements
- All patches must conform to the Linux kernel coding standards and pass
scripts/checkpatch.pl - Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
- If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch:
UPSTREAM:,BACKPORT:,FROMGIT:,FROMLIST:, orANDROID:. - All patches must have a
Change-Id:tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html) - If an Android bug has been assigned, there must be a
Bug:tag. - All patches must have a
Signed-off-by:tag by the author and the submitter
Additional requirements are listed below based on patch type
Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:
- If the patch is a cherry-pick from Linux mainline with no changes at all
- tag the patch subject with
UPSTREAM:. - add upstream commit information with a
(cherry picked from commit ...)line - Example:
- if the upstream commit message is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
UPSTREAM: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch requires any changes from the upstream version, tag the patch with
BACKPORT:instead ofUPSTREAM:.- use the same tags as
UPSTREAM: - add comments about the changes under the
(cherry picked from commit ...)line - Example:
- use the same tags as
BACKPORT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
[joe: Resolved minor conflict in drivers/foo/bar.c ]
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for other backports: FROMGIT:, FROMLIST:,
- If the patch has been merged into an upstream maintainer tree, but has not yet
been merged into Linux mainline
- tag the patch subject with
FROMGIT: - add info on where the patch came from as
(cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't uselinux-nextfor example). - if changes were required, use
BACKPORT: FROMGIT: - Example:
- if the commit message in the maintainer tree is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
FROMGIT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
(cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch has been submitted to LKML, but not accepted into any maintainer tree
- tag the patch subject with
FROMLIST: - add a
Link:tag with a link to the submittal on lore.kernel.org - add a
Bug:tag with the Android bug (required for patches not accepted into a maintainer tree) - if changes were required, use
BACKPORT: FROMLIST: - Example:
- tag the patch subject with
FROMLIST: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for Android-specific patches: ANDROID:
- If the patch is fixing a bug to Android-specific code
- tag the patch subject with
ANDROID: - add a
Fixes:tag that cites the patch with the bug - Example:
- tag the patch subject with
ANDROID: fix android-specific bug in foobar.c
This is the detailed description of the important fix
Fixes: 1234abcd2468 ("foobar: add cool feature")
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch is a new feature
- tag the patch subject with
ANDROID: - add a
Bug:tag with the Android bug (required for android-specific features)
- tag the patch subject with